1
2
3
4
This manual contains important safety precautions and information for correct usage. Please be
sure to read this manual carefully before use to avoid any damage to the device.
Do not place the product in hot, wet or dusty environments.
Do not place the product for outdoor usage.
Avoid dropping or smashing the product.
Select a suitable product with correspondent maximum load of current upto 15A.
Notes:
This device is not waterproof.
All images in this manual are for reference only. Specifications and appearance of the product
are subject to change without prior notice.
5001646
Certification (US)
This product has been thoroughly tested by Intertek ETL, a nationally recognized independent third-party
testing laboratory. The North American ETL Listed mark signifies that the
device has been tested to and has met the requirements of a widely recognized consensus of U.S. and Canadian
device safety standards, that the manufacturing site has been
audited, and that the manufacturer has agreed to a program of quarterly factory follow-up inspections to verify
continued conformance.
5
POWER SOURCE
This LED light bulb is intended for indoor usage only.
This LED light bulb is intended for home usage and not for high load industrial machinery.
Warning : This is a A19 light bulb and it is aimed for A19 socket type socket only.
Reminder: Once you have connected the WIFI LED Light to your home network (Router), you
may use the light switch to control the light bulb ON /OFF just like a regular light bulb. After
being connected to your home network, the light bulb shall stay on with its default color which
is white.
6
GETTING STARTED
Congratulations on buying a iCraig LED Light.This LED Light Bulb allows you to
adjust the temperature.
1. Initial Setup
To get started, you will need:
Your wireless router, its network name, and password if necessary.
An Android™ Smart Phone or Tablet (Android Version 4.0 or later) or an
iPhone, iPad, or iPod touch (iOS Version 6.1 or later).
Make sure your Smart phone or tablet, the wifi status is ON.
2.Download the iCraig SMART App from the App Store or Google Play.
7
 after installing your app, open the APP, press and to choose” Add new online
Bulb” icon to activate the APP.
3. Install LED light bulb to light socket and check the light flashing status:
After you have installed your LED light to the socket and turn on the power,
LED light shall flash with white colors continuously, status as below:

Light flashing slow with white color
** This status indicate as “ready for new connection mode”

Light flashing fast with white color.
** This status indicate as “in progress for connection”

LED lights do not flash holding white state
** This status indicate as “connected to your router (home network)”
8
Setting up your WIFI LED Light:
There are 2 methods to setup your LED light.

Method 1 (When Light flashing slow with white color

Open the APP ,Press the top right “+” icon
)
*Choose “Setup Device WIFI
Connection”

Choose SSID (WIFI name) to your WIFI network and Input your network password if needed.
And Tap the “Start configuring WIFI”

Check the flashing status of LED light. If it is in progress of connection, Light flashing slow with
9
white color.

When the LED lights do not flash holding white state. This indicates that the LED light has
connected to your router.

Return to the page one to press the “” icon, then “ALL connected device “will be listed

Press on the LED light you wish to connect. On the “New Device” page, And press “OK”, the LED
light begin connect to your Smartphone. Now it is finish.
10
B. Method 2 – USE QR Scan
2. Choose and press “Setup
1. Open the app and press
the “+” on the top right screen,
Device wifi connection” ,
see below:
see below
3. To install connection between the LED light and your wifi router:
* Identify your Router Name (SSID) by pressing the bar next to SSID.
* Input your wifi router password
* locate your QR Code label on LED light Instruction Booklet similar to this
* use your Smart Phone to aim on the QR code after pressing the QR SCAN icon on
the APP screen
11
*Press “Start Configuring Wifi” icon to wait for the connection.
4. After successful connection, press “Add new Device”. Then tap on the device you
wish to connect.
12

Touch the new device then Press “OK”, the new LED will logging in, wait until the
LED appear online successfully.
Setting
Press the setting icon
 Choose Modify LED connection setting.
 Choose Delete the LED stored in this app.
 Choose reconnect to reconnect your LED online again.
13
Control
Pressing the LED icon, you will see the following screen that you are able to control
the LED bulb.
 Press setting icon
, to set up a real time clock.
By pressing the Device time Sync with APP, the device thereafter will sync with
your smart phone or tablet in real time. You may also change the time zone as
this device has pre-set with Eastern Standard Time.
14
 Press the Key Logo
next to setting icon on your screen, to change and set
new Password. The default password:8888
*If you don't remember your password that you can press your light power
on/off switch to TURN On and Off LED light 3 times to reset to the default
password:8888
 Tap on the Blue Bulb icon “

”, to turn On / Off of the Led Bulb.
to set up timer and schedule for power On /OFF, press the clock icon,
on top right of the screen.
Tap on
15

Press “
” on the top right screen to add new On/ Off Schedule
 timer: to control the LED light either on or off with specify time.
 Everyday: to set up the LED light on or off with daily schedule.
 Week: to set up the LED light on or off with weekly schedule.
16
Reset (Turn On/Off LED light 3 times by hardware switch)
If you want to reconnect your bulb to other network or wish to set your bulb to
factory default mode. You may turn On & Off continuously for at least 3 times
by using your light switch. You shall delete the previous connection on your
APP and do the reconnection once again.
*erase all network data and P2P password will set to manufacturer default
(8888).
*Each time you need to wait until the light bulb starts to blink then to turn off
the bulb.
17
PRODUCT SPECIFICATION
LIGHT BULB FORM FACTOR
A19
AVERAGE LIFE (HOURS)
25,000
DIMENSIONS (IN.)
Length 4.92 inch X Width 2.75 inch
BULB TYPE
Power Input
Household
Input:100 to240VAC
CONNECTED HOME PROTOCOL
802.11 b/g/n
HOME AUTOMATION PLATFORM
WIFI
INDOOR/OUTDOOR
INDOOR
LIGHT BULB BASE CODE
E27
LIGHT BULB BASE TYPE
Medium
LIGHT OUTPUT (LUMENS)
Pure white 800
WATT EQUIVALENCE
60
WATTAGE (WATTS)
10
18
19