Cape Contract Furniture Inc.
style | innovation | comfort
2016 Table Finish Guide
www.capefurniture.net
sales@capefurniture.net 1.888.343.2273
Index
Standard High Pressure Laminate Finishes
3
Standard Base Finishes & Standard PVC, Poly Resin Finishes
4
Standard Wood Finishes
5
Standard Edge Profiles
6
Top Grade Card - VS1 & ST1
7
Top Grade Card - ST2
8
Top Grade Card - ST3
9
Top Grade Card - ST4
10
Top Grade Card - ST5
11
Top Grade Card - ST6
12
1
STANDARD HIGH PRESSURE LAMINATE FINISHES
· Laminates with a PV (polished velvet) finish are semi gloss and may require longer lead times. All other finishes are suede, matte or textured.
· Clean plastic laminate tops with mild soap and warm water. Do not use steel wool , hot water or any abrasive cleaning products.
· Other high pressure laminates are available on special request. Contact your local Cape represenative.
*Zebrano 9011-58 is a Formica Laminate
*ST 604 is a Pionite Laminate
WZ 2001 T Plum Tree
WM 0046 T Illustrious
Maple
WZ 0005 N Recon Oak
WM 0047 T
Iconic Maple
W 8325 T Cherry
S 7024 T Chalk White
WZ 0028 PV Kona Blend
S 7027 T Smoky White
S 2069 T Beige
MR 6005 T Winter
Matrix
S1027 T Liberty Red
WK 0017 T Old Oak
S 8001 T Papaya
WZ #2007 PV Tendu
S 6037 T Light Gray
S 2084 T Bark
MR 6006 T Cinder
Matrix
S 8003 T Summer Night
WT 0003 PV Teak
*9011-NT Zebrano
S 6012 T Medium Gray
S 6053 T Black
MR 6008 T Birch Matrix
S 5059 T Lagoon
3
W 8371 T Isle Maple
W 8352 V Mahogany
WZ 0049 T Crema
S 6054 T Graphite
*ST 604 Dark Brown
FS 6001 T Rush
SH 2002 T Shibori
S 3068 T Treasure
WM 8340 Maple
S 6052 T String
MXT 003 T Silver
S 5057 T Kiwi
WW 0013 N Walnut
S 3070 T Caribbean Blue
STANDARD BASE FINISHES
· Standard base finishes are powder epoxy in a matte textured finish. Custom finishes are available on special request.
Upcharges apply to polished chrome and satin nickel.
#7024 Chalk White
#7027 Smoky White
#6037 Light Gray
#2084 Bark
#2069 Beige
Yellow
#6012 Medium Gray
#6053 Black
Red
#6054 Graphite
#003 Silver
Orange
#6052 String
#80 Satin Nickel
Green
#ST 604 Dark Brown
#90 Polished Chrome
Blue
Standard PVC and Poly Resin Finishes
· Custom finishes and profiles are available on special request. Poly Resin is not available in a woodgrain finish.
#7024 Chalk White
#7027 Smoky White
#6037 Light Gray
#2084 Bark
#6012 Medium Gray
#6053 Black
#8340 Maple
#6054 Graphite
#003 Silver
#8371 Isle Maple
4
#ST 604 Dark Brown
#W8325 T Cherry
#6052 String
#2069 Beige
STANDARD WOOD FINISHES
· Standard wood edges and veneers are offered in solid birch and/or maple.
· Oak, Mahogany, Walnut, Cherry and other species are available on special request.
· Custom finishes are available at $280.00 List per finish. One time charge.
Natural
Black
Green Moss
Wine
Sapphire
Pearwood
Honey
Mahogany
Ruby
Grape
Charcoal
White
Linseed
Silver
Cherry
Wenge
· Due to the variation in texture, density, grain pattern, and tone of selected wood, variation in color may occur.
· Dust only with a clean, dry cloth, going with the grain Clean any marks with a damp cloth, using a small quantity of mild soap and water.
5
STANDARD EDGE PROFILES
PVC Edge - Custom PVC edge profiles available on request
· All tops are constructed with 45 lbs. particle board.
· Phenolic balancing sheets are added to the underside
of the surface to prevent warping.
· PVC T-mold profiles require a 1” radius corner.
· 3MM PVC edges are eased
·3600 bullnose T-mold is standard with a 2 1/2 “ radius corner · For wood edge care and maintanence refer to the Standard Wood Finishes page.
3mm
#3507
#3500
Solid Wood Edge
- Custom wood edge profiles available on request
#7600
· Poly Resin edges are permanently bonded to the table core.
#3600
#7500 Bevel
Poly Resin Edge
#7300 Flat Eased
- Custom poly resin edge profiles available on request
· Edges are seamless. impact resistant anti-microbial, stain resistant · Scratches can be polished out using fine steel wool
and repairable.
#3
#5
#7
#17
#19
#50
#17R
#200 Spill Proof
6
TOP GRADE CARD
VS1 Top Finish Options
Edge Profile
Top Surface
Standard Laminate Selection
Self Edge
PVC
PVC
PVC
PVC
3000
3500
3507
3600
3MM
Square corners
1" radius corners
1" radius corners
2.5" radius corners
Square corners
Use any Cape Standard Laminate from
the Cape Table Finish Card.
* All tops are 1 1/8" thick
* Tops have particle board cores
unless otherwise specified.
* Custom laminates available on
special request
ST1 Top Finish Options
Edge Profile
Top Surface
Any Matte Laminate from the
following manufacturers:
Self Edge
PVC
PVC
PVC
PVC
3000
3500
3507
3600
3MM
Square corners
1" radius corners
1" radius corners
2.5" radius corners
Square corners
Formica (-58 finish only)
Wilsonart (-60 matte finish only)
Nevamar (T- textured finish only)
Arborite ( CA-Cashmire finish only)
Pionite (Suede finish only)
* Tops have particle board cores
unless otherwise specified.
* Custom laminates available on
special request
7
TOP GRADE CARD
ST2 Top Finish Options
Edge Profile
Top Surface
Any Matte Laminate from the
following manufacturers:
Self Edge
PVC
3050
3570
Formica (-58 finish only)
Wilsonart (-60 matte finish only)
Nevamar (T- textured finish only)
Arborite ( CA-Cashmire finish only)
Pionite (Suede finish only)
* Tops are 1 1/2" thick
* Tops have particle board cores
unless otherwise specified.
Square corners
1" radius corners
* Custom laminates available on
special request
Top Surface
Any Matte Laminate from the
following manufacturers:
Edge Profile
Self Edge Polished Stainless
Self Edge Satin Stainless
3020
3021
Formica (-58 finish only)
Wilsonart (-60 matte finish only)
Nevamar (T- textured finish only)
Arborite ( CA-Cashmire finish only)
Pionite (Suede finish only)
* Tops are 1 1/8" thick
* Tops have particle board cores
unless otherwise specified..
* Custom laminates available on
special request
1" radius corners
1" radius corners
8
TOP GRADE CARD
ST3 Top Finish Options
Top Surface
Any Matte Laminate from the
following manufacturers:
Edge Profile
Self Edge
PVC
PVC
PVC
PVC
3000-CC
3500-CC
3507-CC
3600-CC
3MM-CC
Formica (-58 finish only)
Wilsonart (-60 matte finish only)
Nevamar (T- textured finish only)
Arborite ( CA-Cashmire finish only)
Pionite (Suede finish only)
* All tops are 1 1/8" thick
* Tops include light weight
corrugated core.
* light weight core reduces top weight by 40%.
To calculate the weight reduction, multiply the square footage of the top by 2.5 lbs
* Custom laminates available on
special request
Top Surface
Any Matte Laminate from the
following manufacturers:
Edge Profile
Reverse Bevel
Eased
9001
9002
1/2" radius corners
1/16" radius corners
Formica (-58 finish only)
Wilsonart (-60 matte finish only)
Nevamar (T- textured finish only)
Arborite ( CA-Cashmire finish only)
Pionite (Suede finish only)
* All tops are 1 1/8" thick
* Tops are plywood core 17 ply,
with a natural edge finish.
* Custom laminates available on
special request
9
TOP GRADE CARD
ST4 Top Finish Options
Top Surface
Any Matte Laminate from the
following manufacturers:
Edge Profile
Poly Resin - Seamless, anti-microbial, repairable and impact resistant
3 (eased)
5 (bullnose)
7 (waterfall)
17 (bevel)
Formica (-58 finish only)
Wilsonart (-60 matte finish only)
Nevamar (T- textured finish only)
Arborite ( CA-Cashmire finish only)
Pionite (Suede finish only)
* All tops are 1 1/8" thick
* Tops have particle board cores
unless otherwise specified.
* Custom laminates available on
special request
Edge Profile
Solid wood - Any Cape standard wood finish
7300 (Trim is 1 1/8” x 1/4“ thick)
Top Surface
Edge Profile
Phenolic
Any Pionite laminate color
8000 (eased)
* Tops are 1/2" thick phenolic
* Tops included
a 1/2" black phenolic core
* Tops included
12” x 12” plywood mounting plate
* Custom edge finishes
available on special request
10
19 (reverse bevel)
TOP GRADE CARD
ST5 Top Finish Options
Top Surface
Any Matte Laminate from the
following manufacturers:
Edge Profile
Poly Resin - Seamless, anti-microbial, repairable and impact resistant
In the following profiles: # 50, 17R, 200
50 ( bullnose )
17-R (bevel)
200 (spillproof)
Formica (-58 finish only)
Wilsonart (-60 matte finish only)
Nevamar (T- textured finish only)
Arborite ( CA-Cashmire finish only)
Pionite (Suede finish only)
* Tops are 1 1/8" thick
Solid Wood
In the following profiles: # 7500, 7600
* All tops are 1 1/8” thick
* Tops have particle board cores
unless otherwise specified.
7500 (bevel)
7600 (bullnose)
* Custom laminates available on
special request
Top Surface
Edge Profile
Solid Butcher Block in any Cape standard finish
7900 (eased edge)
Butcher Block
* Tops are 1 1/4" thick
* Yellow birch
* Available in sizes
up to 115” in length
11
TOP GRADE CARD
ST6 Top Finish Options
Top Surface
Wood veneer in any
Cape standard finish
Edge Profile
Solid Wood - In the following profiles: # 7300, 7500, 7600
7300
7500
7600
* Tops have particle board cores
unless otherwise specified.
* All tops are 1 1/8" thick
* Custom veneers available
on special request
Edge Profile
Top Surface
Solid surface from
Cape standard selection
Solid Surface
3 (eased)
5 (bullnose)
* Tops have particle board cores
unless otherwise specified.
* Tops are 1 1/4" thick
12
7 (waterfall)
17 (bevel)
19 (reverse bevel)
www.capefurniture.net 91 Citation Drive, Unit 8-11, Concord, Ontario, Canada L4K 2Y8 | sales@capefurniture.net 1.888.343.2273