OM7800IH Series
ISOLATED HERMETIC TO-257AA FIXED
VOLTAGE REGULATORS
Three Terminal, Fixed Voltage, 1.5 Amp
Precision Positive Regulators In Hermetic
JEDEC TO-257AA Package
FEATURES
•
•
•
•
•
•
Isolated Hermetic Package, JEDEC TO-257AA Outline
Output Voltages: 5V, 12V, 15V (Other Voltages Available)
Output Voltages Set Internally To ±1% or ±2%
Built-In Thermal Overload Protection
Short Ciruit Current Limiting
Product Is Available Screened To OM803
DESCRIPTION
These three terminal positive regulators are supplied in a hermetically sealed
metal package whose outline is similar to the industry standard TO-220 plastic package.
All protective features are designed into the circuit including thermal shutdown, current
limiting and safe-area control. With heat sinking, they can deliver over 1.5 amps of output
current. These units feature internally trimmed output voltages to ±1% or ±2% of nominal
voltage. Standard voltages are 5V, 12V, and 15V. However, other voltages are available
up to 24 volts. These units are ideally suited for Military applications where a hermetically
sealed package is required.
ABSOLUTE MAXIMUM RATINGS @ 25°C
Input Voltage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 V
Operating Junction Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . - 55°C to + 150°C
Storage Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . - 65°C to + 150°C
Typical Power/Thermal Characteristics:
Rated Power @ 25° C TC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17.5W
TA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3W
Thermal Resistance
qJC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.2°C/W
qJA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42°C/W
Notes: Product also available in Non-Isolated construction. To order this version,
delete “I” from part number.
Example:
Isolated
Non-Isolated
OM78XXIH
OM78XXH
Use letter “A” after part number to designate ±1% output voltage tolerance.
Example:
OM7805AIH
4 11 R4
Supersedes 1 07 R3
3.3 - 217
3.3
OM7800IH Series
ELECTRICAL CHARACTERISTICS 5 Volt
VIN = 10V, Io = 500mA, -55°C TA 125°C (unless otherwise specified)
Parameter
Symbol
Test Conditions
Min.
Max.
Output Voltage
VOUT
TA = 25°C
4.92
5.08
V
4.85
5.15
V
5
mV
VIN = 7.5V to 20V
Line Regulation
VRLINE
•
VIN = 7.5V to 20V
•
(Note 1)
VIN = 8.0V to 12V
•
Load Regulation
VRLOAD
IO = 5mA to 1.5 Amp
•
(Note 1)
IO = 250mA to 750 mA
•
Standby Current Drain
DISCD
Change With Line
(Line)
Standby Current Drain
DISCD
Change With Load
(Load)
mV
10
mV
12
mV
25
mV
6
mV
15
mV
mA
6.5
mA
VIN = 7.5V to 20V
0.8
mA
IO = 5mA to 1000mA
•
0.5
mA
Dropout Voltage
VDO
TA = 25°C, DVOUT = 100mV, IO = 1.0A
IO (pk)
TA = 25°C
Short Circuit Current
IDS
VIN = 35V
1.5
•
(Note 2)
DVIN
mV
4
•
•
Peak Output Current
Ripple Rejection
12
6
ISCD
Standby Current Drain
f =120 Hz, DVIN = 10V
2.5
V
3.3
A
1.2
A
2.8
66
•
(Note 3)
NO
TA = 25°C, f =10 Hz to 100KHz
60
40
dB
Long Term Stability
DVOUT
TA = 25°C, t = 1000 hrs.
75
(Note 3)
Dt
(Note 3)
µV/V
RMS
ELECTRICAL CHARACTERISTICS 12 Volt
mV
VIN = 19V, Io = 500mA, -55°C TA 125°C (unless otherwise specified)
Parameter
Symbol
Test Conditions
Min.
Max.
Output Voltage
VOUT
TA = 25°C
11.88
12.12
V
11.64
12.36
V
18
mV
VIN = 14.5V to 27V
Line Regulation
VRLINE
•
VIN = 14.5V to 27V
•
(Note 1)
VIN = 16V to 22V
•
Load Regulation
VRLOAD
IO = 5mA to 1.5 Amp
•
(Note 1)
IO = 250mA to 750 mA
•
3.3
A
dB
DVOUT
Output Noise Voltage
Unit
Standby Current Drain
ISCD
Standby Current Drain
DISCD
Change With Line
(Line)
Standby Current Drain
DISCD
Change With Load
(Load)
mV
9
mV
30
mV
32
mV
60
mV
20
mV
40
mV
6.0
mA
•
•
6.5
mA
0.8
mA
IO = 5mA to 1000mA
•
0.5
mA
•
Dropout Voltage
VDO
DVOUT = 100mV, IO = 1.0A
IO (pk)
TA = 25°C
Short Circuit Current
IDS
VIN = 35V
1.5
•
(Note 2)
DVIN
50
VIN = 15V to 30V
Peak Output Current
Ripple Rejection
f =120 Hz, DVIN = 10V
2.5
V
3.3
A
1.2
A
2.8
61
•
A
dB
DVOUT
(Note 3)
NO
TA = 25°C, f =10 Hz to 100KHz
40
Long Term Stability
DVOUT
TA = 25°C, t = 1000 hrs.
120
(Note 3)
Dt
Output Noise Voltage
Unit
54
dB
(Note 3)
µV/V
RMS
mV
Notes:
1. Load and Line Regulation are specified at a constant junction temperature. Pulse testing with low duty cycle is used.
Changes in output voltage due to heating effects must be taken into account separately.
2. Short Circuit protection is only assured up to VIN = 35V.
3. If not tested, shall be guaranteed to the specified limits.
The • denotes the specifications which apply over the full operating temperature range.
3.3 - 218
OM7800IH Series
ELECTRICAL CHARACTERISTICS 15 Volt
VIN = 23V, Io = 500mA, -55°C TA 125°C (unless otherwise specified)
Parameter
Symbol
Test Conditions
Min.
Max.
Unit
Output Voltage
VOUT
TA = 25°C
14.8
15.2
V
14.6
15.4
V
20
mV
•
VIN = 18.5V to 30V
Line Regulation
VRLINE
VIN = 17.5V to 30V
•
(Note 1)
VIN = 20V to 26V
•
Load Regulation
VRLOAD
IO = 5mA to 1.5 Amp
(Note 1)
•
IO = 5mA to 1.0 Amp
IO = 250mA to 750 mA
•
Standby Current Drain
ISCD
Standby Current Drain
DISCD
Change With Line
(Line)
Standby Current Drain
DISCD
Change With Load
(Load)
25
mV
35
mV
75
mV
21
mV
45
mV
6.0
mA
•
•
6.5
mA
0.8
mA
IO = 5mA to 1000mA
•
0.5
mA
Dropout Voltage
VDO
TA = 25°C, DVOUT = 100mV, IO = 1.0A
IO (pk)
TA = 25°C
Short Circuit Current
IDS
VIN = 35V
1.5
•
(Note 2)
DVIN
f =120 Hz, DVIN = 10V
DVOUT
(Note 3)
NO
TA = 25°C, f =10 Hz to 100KHz
Output Noise Voltage
mV
mV
VIN = 18.5V to 30V
Peak Output Current
Ripple Rejection
50
15
•
2.5
V
3.3
A
1.2
A
2.8
A
54
dB
52
dB
40
µV/V
(Note 3)
RMS
Long Term Stability
DVOUT
(Note 3)
Dt
TA = 25°C, t = 1000 hrs.
150
mV
Notes:
1. Load and Line Regulation are specified at a constant junction temperature. Pulse testing with low duty cycle is used.
Changes in output voltage due to heating effects must be taken into account separately.
2. Short Circuit protection is only assured up to VIN = 35V.
3. If not tested, shall be guaranteed to the specified limits.
The • denotes the specifications which apply over the full operating temperature range.
TYPICAL PERFORMANCE CHARACTERISTICS
PEAK OUTPUT
DROPOUT VOLTAGE
2.5
Tj = -55°C
2.5
Tj = 25°C
2
1.5
Tj = 150°C
1
0.5
DVOUT = 100mV
0
0
5
10
15
20
25
30
35
100
IOUT = 1A
2
IOUT = 500mA
1.5
IOUT = 0A
1
0.5
0
80
60
40
VIN - V = 8VDC + 3.5 Vrms
IOUT = 1A
Tj = 25°C
25 50 75 100 125 150
10
Input To Output Differential (V)
3.3
VOUT = 5V
20
DVOUT = 100MV
0
-75 -50 -25
Ripple Rejection (dB)
3
Input To Output Differential (V)
3.5
Output Current (A)
RIPPLE REJECTION
Junction Temperature (°C)
3.3 - 219
100
1k
10k
Frequency (Hz)
100k
OM7800IH Series
TYPICAL APPLICATIONS
Fixed Output Regulator
INPUT
Circuit For Increasing Output Voltage
OUTPUT
OM78XX
OM7662SC
INPUT
OUTPUT
OM78XX
OM7605SC
VXX
1µFt
R1
0.1µF*
1µF
0.1µF
IQ
R2
R2
VO = VXX (1+ R1 ) + IQ R2
*Increasing value of output capacitor improves
system transient response.
tRequired only if regulator is located an appreciable
distance from power supply filter.
High Output Current,
Short Circuit Protected
INPUT
RSC
R1
Adjustable Output Regulator,
7 To 30 Volts
2N4398
INPUT
2N6124
OUTPUT
OM7662SC
OM78XX
0.33µF
+
MECHANICAL OUTLINE
10K
PIN CONNECTION
.200
.190
.420
.410
0.1µF
LM741
1µF
1µF
3.3
OUTPUT
OM7662SC
OM78XX
Tab
.045
.035
.665
.645
.150
.140
.537
.527
.430
.410
.038 MAX.
.750
.500
.035
.025
.100 TYP.
.005
.120 TYP.
OM78XXIH
Isolated
Front View
Pin 1: Input
Pin 2: Ground
Pin 3: Output
Tab: Isolated
OM78XXH
Non-Isolated
Front View
Pin 1: Input
Pin 2: Ground
Pin 3: Output
Tab: Ground
1 2 3
Note:
• Case is metal/hermetically sealed
• Isolated Tab
205 Crawford Street, Leominster, MA 01453 USA (508) 534-5776 FAX (508) 537-4246