LSI Busway System
LSI 20 Series 30A, 120V Surface Busway Components
1
IBEW union made at LSI plant in USA • Specification grade heavy duty .075 (1.8mm) extruded aluminum
busway • 8 foot (2.4m) and 12 foot (3.7m) field cuttable lengths • One circuit 30 amp or two circuit 60 amp
capacity/120 volt • Oversized copper busbars equivalent to #10 AWG wire used as busway conductors • Separate
neutral busway conductor used for each circuit • Black, White, Silver, and Graphite finishes • All Joiner/Feeders,
Mini-Joiners, End Feeds and End Caps are injection molded of fiber reinforced Lexan™ • All Joiner/Feeders are
prewired and simply couple into busway • Most Joiner/Feeder circuits can be easily field modified • All Feeder
contacts and busbars are plated for extra corrosion resistance • Fixture fitting, with integral safety interlock
on/off switch, recesses into busway for minimum profile • US Patent #7744386B1
120V Surface Busway Sections are used in
conjunction with an End Feed, End Cap and a
variety of Joiner/Feeders to form busway runs
and configurations. Busway Section lengths are
8 foot (2.4m) and 12 foot (3.7m) which are
field cuttable.
Surface Busway Sections
8'
12'
120V Mini-End Feed can be used in
conjunction with a Canopy Kit for top feeding
from a recessed outlet box/unimount/other
(ordered separately). 18” of 10 GA. wire
supplied.
Mini-End Feed
Finish
One Ckt
Two Ckt
One Ckt
Black
Two Ckt
One Ckt
White
Two Ckt
Graphite One Ckt
Two Ckt
Silver
Finish
Silver
Black
White
5 1/4"
Graphite
120V End Feed for Conduit Connector is used
when feeding directly into the end of an End
Feed. Connector supplied with 1/2” US trade
size pry-out and can also be top fed directly
with cable. A canopy kit is available (ordered
separately).
End Feed for Conduit Connector
Finish
Silver
Black
White
12"
Graphite
Straight Joiner/Feeder
12"
120V Straight Joiner/Feeder is used to
mechanically and electrically couple any two
lengths of busway in a straight line. Straight
Joiner/Feeder can also be top fed to energize
the busway from a recessed outlet box when
used in conjunction with appropriate Canopy
Kit or can be top fed directly with cable through
1/2” US trade size pry-out. Circuits can be field
terminated or re-configured.
Finish
Silver
Black
White
Graphite
Actual length
8 Ft
12 Ft
201020
201030
202020
202030
201220
201230
202220
202230
201320
201330
202320
202330
201420
201430
202420
202430
One Ckt Left
One Ckt Right
Two Ckt
One Ckt Left
One Ckt Right
Two Ckt
One Ckt Left
One Ckt Right
Two Ckt
One Ckt Left
One Ckt Right
Two Ckt
20L100
20R100
202100
20L200
20R200
202200
20L300
20R300
202300
20L400
20R400
202400
One Ckt Left
One Ckt Right
Two Ckt
One Ckt Left
One Ckt Right
Two Ckt
One Ckt Left
One Ckt Right
Two Ckt
One Ckt Left
One Ckt Right
Two Ckt
20L102
20R102
202102
20L202
20R202
202202
20L302
20R302
202302
20L402
20R402
202402
One Ckt
Two Ckt
One Ckt
Two Ckt
One Ckt
Two Ckt
One Ckt
Two Ckt
201104
202104
201204
202204
201304
202304
201404
202404
LSI 20 Series 30A, 120V Surface Busway Components
120V Mini-Straight Joiner is used to
mechanically and electrically couple any two
lengths of busway in a straight line.
Mini-Straight Joiner
Finish
Silver
Black
White
2 15/16"
Graphite
L Joiner/Feeder
6 15/16"
120V L Joiner/Feeder is used to mechanically
and electrically couple any two lengths of
busway in an L right angle configuration. This
L Joiner/Feeder can also be top fed to energize
the busway from a recessed outlet box when
used in conjunction with appropriate Canopy
Kit or can be top fed directly with cable
through 1/2” US trade size pry-out. Circuits
can be field terminated or re-configured.
Finish
Silver
Black
White
Graphite
120V Mini-L Joiner is used to mechanically and
electrically couple any two lengths of busway in
an L right angle configuration. Circuits can be
field terminated only.
Mini-L Joiner
Finish
Silver
Black
White
3 1/2"
Graphite
Mini-T Joiner
5 3/16"
120V Mini-T Joiner is used to mechanically and
electrically couple any three lengths of busway in
a T configuration. Internal Joiner wiring can be
field modified. Note that in the one circuit
version, a inner and an outer T must be ordered
and must be used directly opposite each other
when used in a configuration so that busbar
continuity is maintained. For two circuit busway,
an inner and an outer T is not necessary. Circuits
can be field terminated only.
Finish
Silver
Black
White
Graphite
2
No Ckt
One Ckt
Two Ckt
No Ckt
One Ckt
Two Ckt
No Ckt
One Ckt
Two Ckt
No Ckt
One Ckt
Two Ckt
200114
201114
202114
200214
201214
202214
200314
201314
202314
200414
201414
202414
Inner One Ckt
Outer One Ckt
Two Ckt
Inner One Ckt
Outer One Ckt
Two Ckt
Inner One Ckt
Outer One Ckt
Two Ckt
Inner One Ckt
Outer One Ckt
Two Ckt
20L105
20R105
202105
20L205
20R205
202205
20L305
20R305
202305
20L405
20R405
202405
Ckt Configuration
Inner One Ckt
20L115
Outer One Ckt 20R115
Two Ckt
202115
Inner One Ckt
20L215
Outer One Ckt 20R215
Two Ckt
202215
Inner One Ckt
20L315
Outer One Ckt 20R315
Two Ckt
202315
Inner One Ckt
20L415
Outer One Ckt 20R415
Two Ckt
202415
Ckt Configuration
Inner One Ckt
20L116
Outer One Ckt 20R116
Two Ckt
202116
Inner One Ckt
20L216
Outer One Ckt 20R216
Two Ckt
202216
Inner One Ckt
20L316
Outer One Ckt 20R316
Two Ckt
202316
Inner One Ckt
20L416
Outer One Ckt 20R416
Two Ckt
202416
LSI 20 Series 30A, 120V Surface Busway Components
Mini-X Joiner
5 3/16"
120V Mini-X Joiner is used to mechanically
and electrically couple any four lengths of
surface busway in an X configuration. Note
that in the one circuit version, a inner and an
outer X must be ordered and must be used
directly opposite each other when used in a
configuration so that busbar continuity is
maintained. For two circuit busway, an inner and
an outer is not necessary.
Finish
Silver
Black
White
Graphite
120V End Cap is used for electrically ending
any straight run, individual Busway Section, or
open configuration Busway Section.
End Cap
1/8"
120V 15A NEMA 5-15R receptacle adapter
provides a convenient switched and fused
receptacle for power.
Power Outlet - 15 AMP
3
Ckt Configuration
Inner One Ckt
Outer One Ckt
No Ckt/Mechanical Only
Center One Ckt
Center Two Ckt
Two Ckt
Inner One Ckt
Outer One Ckt
No Ckt/Mechanical Only
Center One Ckt
Center Two Ckt
Two Ckt
Inner One Ckt
Outer One Ckt
No Ckt/Mechanical Only
Center One Ckt
Center Two Ckt
Two Ckt
Inner One Ckt
Outer One Ckt
No Ckt/Mechanical Only
Center One Ckt
Center Two Ckt
Two Ckt
Finish
Silver
Black
White
Graphite
One
One
One
One
Finish
Silver
Black
White
Graphite
15
15
15
15
Amp
Amp
Amp
Amp
201112
201212
201312
201412
Finish
Silver
Black
White
Graphite
20
20
20
20
Amp
Amp
Amp
Amp
201122
201222
201322
201422
&
&
&
&
Two
Two
Two
Two
Ckt
Ckt
Ckt
Ckt
20L119
20R119
200119
201119
20C119
202119
20L219
20R219
200219
201219
20C219
202219
20L319
20R319
200319
201319
20C319
202319
20L419
20R419
200419
201419
20C419
202419
30103
30203
30303
30403
6 3/4"
120V 20A NEMA 5-20R receptacle adapter
provides a convenient switched and fused
receptacle for power. Molded receptacle with
4” SJT 12/3 cable is available in black only.
Power Outlet - 20 AMP
6 3/4"
Field cuttable Noryl Closure
Covers are used to enclose the open face
of the busway, and simply snap into place.
Closure Cover
3'-4"
7'-4"
11'-4"
Finish
4 Ft
Silver
30165
Black
30265
White
30365
Graphite 30465
Nominal length
8 Ft
12 Ft
30166
30167
30266
30267
30366
30367
30466
30467
Lighting Services Inc
2 Holt Drive
Stony Point, NY 10980 -1996
Tel: +1 845 942.2800
Fax: +1 845 942.2177
www.LightingServicesInc.com
www.LightingServicesInc.co.uk
CM410 7-11