Series KL
Heavy Duty Industrial
Strip With Reflectors
FEATURES & SPECIFICATIONS
INTENDED USE
Heavy duty, specification grade, deep body industrial strip with embossed steel reflectors for interior warehouse, retail, and utility areas requiring concentrated illumination in an industrial quality configuration.
SIZE W x L x H in inches (mm)
2L 10.0W x 5.25H x 48.0L (255 x 135 x 1220)
3L or 4L 12.0W x 6.0H x 48.0L (305 x 150 x 1220)
LAMP
MOUNTING
2,3, or 4 lamp position.
Surface mount, chain hung, double stem. See
end of chapter T02Strip for accessory mount
kits.
MATERIALS & FEATURES
Housing is die-formed and embossed heavy duty 20 gage steel. Finish is
high reflectance baked white enamel. Wiring knockouts are provided on
back and end of housing. Reflector attaches with wing nuts; no tools
required for ballast access. See K Series for similar fixtures with no
reflectors.
LISTING
Fixture and Ballast: UL Listed.
Ballast: Thermally protected, class P, HPF,
Non PCB; unless specified otherwise.
• W3x, economical white steel reflectors, for abusive locations
Two styles: symmetric and symmetric with uplight
• Extended end caps protect lamp holders
• M20 Mirrored reflectors for high efficiency
TYPICAL OPTIONS AND ACCESSORIES
Emergency ballasts, whips, fuses, and wire
guards. See options page at the end of the
T02Strip section, or contact factory for more
ORDERING INFORMATION
KL
3
Example: KL 3 F96T12HO W30 E277
W3 0
F96T12HO
E277
Reflectors [3]
W3 0
White Steel reflector Standard Mount
W3 0 UP White Steel reflector Up Light
M20
Mirrored reflector
Series
KL
Heavy Duty
Industrial White Steel
Embossed Reflector
Ballast & Voltage [1]
(Lamps not included)
Lamp Count
2,3, or 4
2,3, or 4
2,3, or 4
2,3, or 4
2,3, or 4
2,3, or 4
2,3, or 4
2,3, or 4
Lamp Type [1] & Tandem Code [2]
40
F96T12
F48T12HO
F96T12HO
32 59
F48T8HO
F96T8HO
8 48 in. T12 [4]
8ft. Tandem (Double Lamp Count)
96 in. T12 Slimline
48 in. T12HO
96 in. T12HO [5] 8 48 in. T8
8ft. Tandem (Double Lamp Count)
96 in. F96T8 59W Slimline 48 in. T8HO
96 in. T8HO E120
E277
MV
H120 [3]
H277 [3]
HMV [3]
L120 [3]
L277 [3]
LMV [3]
M120 [4,5]
M277 [4,5]
Electronic, 120V
Electronic, 277V
Electronic, Multivolt (120-277)
Electronic, 120V, Hi-Lume
Electronic, 277V, Hi-Lume
Electronic, Multivolt, Hi-Lume
Electronic, 120V, Lo-Lume
Electronic, 277V, Lo-Lume
Electronic, Multivolt, Lo-Lume
Magnetic, 120V
Magnetic, 277V
Tandems
not stocked. Contact factory for availbility.
Options [1]
Notes
[1] See end of T02Strip section for many additional lamps, ballasts, finishes, and options.
[2] Tandem doubles length and lamp count. Same lamps in cross section, additional lamps end to end.
[3] HiLume and LoLume ballasts available for T8 lamps only.
[4] Standard magnetic T12 ballasts for 48in lamp drive a 34W energy saver. Specify electronic to drive 48in T12 34 or 40W lamp.
WP
WP10
EM
EM14
D
[5] Standard magnetic ballasts for F96T12HO drive 95W energy saving lamp. Specify electronic to drive 95 or 110W lamp.
Texas Fluorescents
2055 Luna Rd. Suite 142 Carrollton, TX 75006
Phone: 972-247-3171 Fax: 972-247-0200
www.texasfluorescents.com emaiil: sales@texasfluorescents.com
Catalog Number:
Notes:
6 ft. 3 wire 18 gauge whip
6 ft. 4 wire 18 gauge whip
Emergency ballast, 500 lumens
Emergency ballast, 1400 lumens
Ballast Disconnect
Series KL
Heavy Duty Industrial
Strip With Reflectors
DIMENSIONS
All dimensions are inches. Specifications subject to change without notice.
4.75 in.
4.75 in.
2.88 in.
2.88 in.
5.25 in.
6.0 in.
10.0 in.
12.0 in.
2 Lamp
3 Lamp
4.75 in.
*Reflectors available in
embossed white steel or
mirrored aluminum.
2.88 in.
6.0 in.
12.0 in.
4 Lamp
Catalog Number:
Notes:
Texas Fluorescents
2055 Luna Rd. Suite 142 Carrollton, TX 75006
Phone: 972-247-3171 Fax: 972-247-0200
www.texasfluorescents.com emaiil: sales@texasfluorescents.com