1
Precision Measuring Tools
LaserTRACER-NG
Measuring in space with sub-micron accuracy
Germany Made
The LaserTRACER-NG was developed for calibration, monitoring and accuracy enhancement of
measuring machines and machine tools. It is a self-tracking laser interferometer that automatically
tracks a reflector, and hence allows for the identification of geometrical deviations with highest
precision.
TECHNICAL SPECIFICATIONS
LaserTRACER weight
Controller weight
LaserTRACER height
Height of reference sphere above machine table
Laser class
Angular range elevation axis
Angular range azimuth axis
Measuring range
8.5 kg
13.5 kg
230 mm
165 mm
2M
-35° to 85°
-225° to 225°
0.2 m - 20 m (larger machine dimensions are
covered by stitching of measurements)
2
Angular range reflector (cateye)
Angular range elevation axis
Environmental temperature for accuracy specification
Maximal permissible acceleration of the reflector
Maximal permissible velocity of the reflector
Frequency stability laser 24 h
Stability of the reference sphere at ΔT = ±1 K
Resolution interferometer
Spatial displacement measurements
120° respectively 160°
-35° to 85°
15 °C – 35 °C
8 m / s²
20 m / min
2 · 10-8
± 0.1 μm
0.001 μm
U(k=2) = 0.2 μm + 0.3 μm/m
Input Power
80 W – 100 W
Precision Measuring Tools
VC-10-EL
Contour, Roughness and Roundness Measurement
Germany Made
Benefits:
• The powerful all-round system for the entire variety of contour measurement tasks
• Contour and roughness in one measurement with the optional roughness module
• Roundness measurements and composite measurements with optional rotary-swivel table
• Outstanding genuine resolution of 3 nm direct at the stylus tip
• Y-table optional
• Axis guide and head integrally made from one workpiece
• X axis permanently and absolutely backlash free connected to the Z axis
• High-precision linear axes with integrated drive
• Body made of high-strength aircraft aluminium
• Contactless and absolutely wear-free linear-incremental measuring system
• Machine calibration (including stylus tip calibration) in less than 3 minutes
• Quick stylus tip replacement with optacom quick-release fastener. No tools required and no accuracy loss
Technical data:
Resolution in X and Z axis:
0,002 μm
Resolution at stylus tip:
0,003 μm
Measuring range vertical (Z axis):
325 mm
Measuring range horizontal (X axis):
325 mm
Measurement system:
optical incremental and contactless in all axis (X, Z, T)
Accuracy:
+/- (0,5 + L/100)μm
Maximum measuring force:
10 – 150 mN
Measuring speed:
0,1 – 2 mm/sek (automatisch optimiert)
Radius of the stylus tip:
0,002 – 1 mm
Measurable gradients:
78° upwards; 87° downwards
Dimensions (W x D x H):
1200 x 380 x 725 mm
Weight:
180 kg
Scope delivery:
• Measuring machine optacom VC-10
• Industrial PC
• Minimum 21“ TFT monitor
• Mouse and keyboard
• Inkjet printer
• Windows-Software
• Optacom contour software
• Two quick-release fasteners and two stylus tips
• Calibration standard with certificate (for machine calibration purposes)
3
Precision Measuring Tools
V3 / V4
Height Gauges for the Workshop
Swiss Made
Height Measurements
Diameter
Measurements
Min/Max/Delta
Perpendicularity
Long Probes
Accessories
User-Friendly
Functions
Maximum Contrast
• Measuring ranges 400 and 700 mm
• Extremely easy to use
• Electronically adjustable measuring force
• Autonomy: 40 h (lithium-ion batteries)
• Larger than 300 mm probes as standard
• Vast range of accessories
• All adjustments possible without tools
• RS232 et USB interfaces
Technical data:
V3
400
700
Measuring range
mm (in)
407 (16)
711 (28)
Measuring range with extension
mm (in)
508 (20)
812 (32)
Max. permissible errors, EMPE
μm
7
8
Repeatability, RMPE (2s)
μm
2 (Ø: 4)
2 (Ø: 4)
μm
10
Frontal squareness deviation, SMPE
Resolution
0.001 (0.00005)
Measuring force
N
0.75 ÷ 1.5
Autonomy
h
40
Air cushion
No
Promotion Price
V4
119,900.-
139,900.-
400
700
Measuring range
mm (in)
407 (16)
711 (28)
Measuring range with extension
mm (in)
719 (28)
1023 (40)
Max. permissible errors, EMPE
μm
5
7
Repeatability, RMPE (2s)
μm
2 (Ø: 4)
2 (Ø: 4)
Frontal squareness deviation, SMPE
μm
10
15
Resolution
mm (in)
0.001 (0.00005)
Measuring force
N
0.75 ÷ 1.5
Autonomy
h
40
Yes
Air cushion
Promotion Price
4
15
mm (in)
Note: The above values have been determined according to ISO 13225. They are valid with the standard measuring insert
(TA-MI-101), at a temperature of 20 ± 0.5 °C and relative humidity of 50 ±5%.
159,900.-
174,900.-
Precision Measuring Tools
V5 / V6
Height Gauges for the Workshop
Swiss Made
Height Measurements
Diameter
Measurements
Min/Max/Delta
Perpendicularity
Long Probes
Switch manual/
motor-driven
Accessories
Interface
• Measuring ranges 400, 700 and 11000 mm
• Extremely easy to use
• Electronically adjustable measuring force
• Manual or motor-driven displacement
• Larger than 300 mm probes as standard
• Vast range of accessories
• All adjustments possible without tools
• RS232 et USB interfaces
Technical data:
V5
400
700
1000
711 (28)
1110 (43.7)
1023 (40.3)
1422 (56)
Measuring range
mm (in)
407 (16.0)
Measuring range with extension
mm (in)
719 (28.3)
Max. permissible errors, EMPE
μm
2.5 + L(mm)/300
Repeatability, RMPE (2s)
μm
2
Frontal squareness deviation, SMPE
Resolution
μm
5
8
mm (in)
0.001 (0.00005)
Measuring force
N
0.75 ÷ 1.5
Autonomy
h
11
40
Yes
Air cushion
Promotion Price
V6
165,000.-
195,000.-
269,900.-
400
700
1000
Measuring range
mm (in)
407 (16.0)
711 (28)
1110 (43.7)
Measuring range with extension
mm (in)
719 (28.3)
1023 (40.3)
1422 (56)
Max. permissible errors, EMPE
μm
2 + L(mm)/400
Repeatability, RMPE (2s)
μm
1 (Ø: 2)
Frontal squareness deviation, SMPE
μm
Resolution
5
8
mm (in)
0.001 (0.00005)
Measuring force
N
0.75 ÷ 1.5
Autonomy
h
20
Yes
Air cushion
Promotion Price
11
199,900.-
Note: The above values have been determined according to ISO 13225. They are valid with the standard measuring insert
(TA-MI-101), at a temperature of 20 ± 0.5 °C and relative humidity of 50 ± 5%.
239,000.-
309,900.-
5
Precision Measuring Tools
BlueLEVEL-2D
Swiss Made
with or without radio transmission
TECHNICAL SPECIFICATIONS
Sensitivity
Measuring range
Limits of error (DIN 2276/2)
ME = full-scale
MW = measured value
Temperature error / °C (Ø 10 °C) (DIN 2276/2)
ME = full-scale
BlueLE VEL -2D
0.001 mm/m
0.2 arcsec
0.005 mm/m
1 arcsec
±20 mm/m
±100 mm/m
MW <0.5 ME
max. 1% MW / min. 1 digit
MW >0.5 ME
max. 0.01 (2 |MW| - 0.5 ME)
MW <= 0.1 ME
max. 2 μm/m
MW > 0.1 ME
max. 20 μm/m
Response time (DIN 2276/2)
Digital output
23
< 5 sec
RS232 / RS485, asynchronous, 7 DataBits,
2 StopBits, no parity, 9600 bps
2 x 1.5 V Alkaline,
2 x 1.2 V NiMH
+ 5 V DC (USB)
24 V DC
Operating temperature
0 ... + 40 °C
Storage temperature (DIN 2276/2)
- 30 ... + 70 °C
Net weight, including batteries
(BlueLEVEL-2D without measuring base)
102
127
max. 100 μm/m
External power supply
23
85
110
Batteries - size C
Optional (rechargeable)
max. 10 μm/m
Dimension housing L x W x H
Radio Transmission (Bluetooth®) Frequency
1400 g
127 mm x 110 mm x 56 mm
ISM Band / 2,4000 … 2,4835 GHz
CE-conformity
Meets emission and immunity requirements
BlueLEVEL-2D has the following features:
• Rugged, rust-protected housing made of aluminium
• High precision bases with three inserts made of sintered
carbide Ø20 mm with one M4 thread each
• Large and very easy-to-read color display
• Various display methods can be chosen
• All current units can be indicated
• The instrument is compatible with the full range of WYLER
digital sensors
• Powered by standard 1.5 V batteries, rechargeable
batteries or with mains adapter
• The internal software allows a simple zero setting,
together with a reversal measurement,
• Fulfils the strict CE- / FCC requirements (immunity /
emission electromagnetic smog)
• Options:
• External power supply 24 V
• Wireless communication, based on Bluetooth
technology
• Cable to connect the instrument to a PC
• Software to collect measuring data
• Various measuring bases on special request, like e.g. prismatic
6
BlueLEVEL-2D มีคุณสมบัตทิ วั่ ไป ดังนี้
• ตัวเครื่ องท�ำจากอลูมิเนียมแข็งแรงทนทานและไม่เป็ นสนิม
• ขาวางมีความแม่นย�ำสูงพร้อมด้วยแท่งคาร์ไบด์เผา 3 อัน ขนาด 20 มม และ เจาะ
รู ขนาด M4
• จอแสดงผลสี มีขนาดใหญ่และสามารถอ่านง่าย
• มีหลากหลายรู ปแบบในการแสดงผลให้เลือก
• สามารถแสดงหน่วยวัดต่างๆ ได้ดว้ ย
• เครื่ องมือนี้สามารถท�ำงานร่ วมกับเซ็นเซอรื ดิจิตอลได้อย่างดี
• ใช้แบตเตอรี่ ไฟขนาด 1.5 โวลท์, หรื อชนิดที่ชาร์จได้ หรื อจะใช้ Adapter ไฟ
โดยตรง
• มีซอฟท์แวร์ติดตั้งภายในที่ช่วยในการเซ็ทศูนย์ โดยการวัดแบบหมุน 180 องศา
• ตามมาตรฐาน CE- / FCC
• อุปกรณ์เสริ ม:
• แหล่งก�ำเนิดไฟภายนอก 24 โวลท์
• การเชื่อมต่อแบบไร้สาย แบบบลูทูธ
• สายเคเบิ้ล ส�ำหรับต่อเข้ากับเครื่ องคอมพิวเตอร์
• ซอฟท์แวร์สำ� หรับเก็บและบันทึกค่าวัด
• สามารถสัง่ ท�ำฐานวางเครื่ องได้ตามต้องการ เช่น แบบร่ องวี
Precision Measuring Tools
BlueSYSTEM SIGMA
Swiss Made
with or without radio transmission
TECHNICAL SPECIFICATIONS
BLUETOOTH® RADIO MODULES
Frequency
ISM-Band / 2,4000 - 2,4835 GHz
TECHNICAL SPECIFICATIONS
Sensitivity
Measuring range
Limits of error (DIN 2276/2)
ME = full-scale
MW = measured value
Temperature error / °C (Ø 10 °C) (DIN 2276/2)
ME = full-scale
Response time (DIN 2276/2)
Digital output
Batteries - size C
Optional (rechargeable)
External power supply
Operating temperature
Storage temperature (DIN 2276/2)
Net weight, including batteries
(BlueLEVEL without measuring base)
CE-conformity
The key features of this new series of instruments are:
• Compact and pleasant design which is functionally
optimised for precision measurement
• Radio data transmission based on the internationally
approved Bluetooth™- standard (Option)
• Large and easy-to-read LCD display, which can be read
from both sides since the handle can be rotated
• Each instrument has its own specific address allowing
the use of several independent systems in the same room
without interfering with each other
• Since each instrument has a built in Infrared receiver, the
measurement can be initiated at any instrument
• There are two sensitivities available:
• BlueLEVEL 0.001 mm/m: range ± 20 mm/m
• BlueLEVEL 0.005 mm/m: range ± 100 mm/m
• Linearity according to DIN 2276
• All instruments are equipped with RS232- / RS485
interfaces
• Powered by standard 1.5 V batteries, size C
• In compliance with CE regulations and all applicable
EMC regulations
BlueLEVEL
0.001 mm/m
0.2 arcsec
0.005 mm/m
1 arcsec
±20 mm/m
±100 mm/m
MW <0.5 ME
max. 1% MW / min. 1 digit
MW >0.5 ME
max. 0.01 (2 |MW| - 0.5 ME)
MW <= 0.1
max. 2 μm/m
max. 10 μm/m
MW > 0.1 ME
max. 20 μm/m
max. 100 μm/m
< 5 sec
RS232 / RS485, asynchronous, 7 DataBits,
2 StopBits, no parity, 9600 bps
2 x 1.5 V Alkaline
2 x 1.2 V NiMH
+ 5 V DC, max. 450 mW
0 ... + 40 °C
- 30 ... + 70 °C
1200 g
Meets emission and immunity requirements
คุณลักษณะเด่นๆ ของเครื่ องมือรุ่ นใหม่น้ ี มีดงั นี้
• กระทัดรัดและหน้าตาที่ได้รับการออกแบบมาเพื่อการวัด
ละเอียดอย่างดี
• การส่ งข้อมูลผ่านคลื่นวิทยุแบบบลูทูธ ที่เป็ นที่รู้จกั ดีในระดับ
สากล (อุปกรณ์เสริ ม)
• จอแสดงผลแอลซีดีใหญ่และง่ายต่อการอ่าน สามารถอ่านค่าได้
ทั้งสองด้าน
• เครื่ องมือแต่ละตัวมีหมายเลขที่อยูป่ ระจ�ำตัว ที่ช่วยไม่ให้เกิด
การสับสนในการเชื่อมต่อเมื่ออยูใ่ นห้องเดียวกัน
• ด้วยการติดตั้งตัวรับแสงอินฟราเรดที่ตวั เครื่ อง ท่านสามารถสัง่
การท�ำงานได้ดว้ ยรี โมทอินฟราเรดให้เริ่ มการวัด
• มีความไวในการอ่านให้เลือก ถึง สอง แบบ
• BlueLEVEL 0.001 มม/ม: ช่วงวัด ± 20 มม/ม
• BlueLEVEL 0.005 มม/ม: ช่วงวัด ± 100 มม/ม
• ค่าความเป็ นเส้นตรง ตามมาตรฐาน DIN 2276
• เครื่ องมือดิจิตอลทุกตัว ติดตั้งพอร์ท RS232- / RS485
• ใช้ไฟจากแบตเตอรี่ มาตรฐาน 1.5 โวลท์, ชนิด ซี
• ท�ำตามมาตรฐานยุโรป CE และ EMC
7
Precision Measuring Tools
Multiple Inspector RM
Rotating simultaneous measurements
Germany Made
Measurement of geometries
Double flank gear roll test
RM Horizontal
RM Vertical
Diameter
Spline
Performance and Application
• Fast measuring of specific features for gears and splines like dimension
over balls, runout and roundness
• Double flank roll test for gears
• Rolling ball inspection using measuring wheels on splines
• Measuring time approximately 15 seconds simultaneously on all
measuring points
• Automatic slide and tailstock
• Detecting deviations in position on gears, diameters and surfaces
• Automated testing allows a 100-percent-inspection
• Highest precision due to substitution procedure (calibration with setting
master)
• Designed for shop-floor use, very robust
• Link between production and measuring laboratory
• Freely programmable system with a powerful evaluation software
• Recording of all measurement results for process monitoring.
Interfaces: qs-stat®, transfer format, csv®, pdf® etc.
• Adaption of mechanics and software to customers’ specification Spline
max. length
750 mm
max. external dia
230 mm
min. internal dia
20 mm
max. weight
15 kg
measurement
slide
85 mm
measurement
sequence
automatic

lamping
between tips automatic

profiled setting master

ground shafts
optionally
part
calibration
Main shaft manual transmission
Software:
The software for RM is functional
and extremely well equipped. All
necessary information is clearly
structured and displayed - it is easy
to see whether the workpiece has
passed the inspection or not.
crank shaft
8
Precision Measuring Tools
Variable 3-Disc Indicating Gauges VD
Determination of true size effective
Germany Made
Circumferential backlash measuring instruments (variable 3-disc indicating
gauges) IVD / AVD measure the actual circumferential backlash in relation
to the tolerance limit max. effective / min. effective. Circumferential backlash
measuring instruments are therefore fully toothed.
The instrument is adjusted by means of a setting plug or a setting ring.
There is no standard method of inspecting the circumferential backlash – it
is specified in standards ANSI B92.1 and ISO 4156 as a special inspection
method.
Composite no go gauges are the basis for circumferential backlash. They
are listed in these two standards as special inspection methods „Alternate
A“ and „Alternate B“. Circumferential backlash measuring instruments can
be used instead of composite no go gauges.
Linear Gear Flank Analyser Rack RWL
Quality control based on double flank gear roll inspection
Features and Applications:
Quick and easy control of the quality of the rack profile in accordance with
the double flank gear rolling inspection.
Technical Data :
RWL rack
max. length
1000 mm
max. external dia
40 mm
min. external dia
21 (17) mm
measurement
slide
typical 200 mm
measurement
sequence
automatic
●
clamping
grab, proceeding
calibration
setting master
●
●
part
● standard ○ optional
Double Flank Gear Roll Inspection Machines
The simple functional inspection
Advantages of FRENCO’s double flank gear roll inspection machines:
• Stable machines for the shop floor use.
• Customer-specific design: The machines are perfectly adjusted to the
specimen to be measured and to the conditions of measurement.
• The measuring force is infinitely variable.
• Rapid lift-off of the measurement carriage.
• Using non-rotating tips and mounting mandrels, the runout deviation is
kept low.
• Special master gear pair for calibration.
• With the evaluation software ‘FGI pro’ being in-house developed, quick
support is available should any issues arise.
• The master gears are manufactured in-house at FRENCO in Altdorf,
Germany.
• On request, we can upgrade older double flank gear roll inspection
machines with FRENCO meas-urement electronics and the FGI evaluation
software.
9
Precision Measuring Tools
STM-3020M
Measuring Microscope
Product Features:
• Bright field observation, clear and flare less obverse image, wide
field of view.
• Long working distance objectives, up to optical 200x magnification
(Video magnification:200x).
• Aperture diaphragms in the transmitted illumination and reflected
illumination system as standard feature.
• The quick-release system, which is especially useful in long-stroke
measurements.
• Focus and measure using the fine/coarse movement handle with
the large-size grips on both sides of the column.
• Zero-set switches (X- and Y-axis) are also located near the stage
feed handles.
• Available with the Vision Unit for upgrading to a vision measuring
system.
Technical Specifications:
Microscope Model
STM-2010M
STM-2515M
STM-3020M
Code#
532-170
532-180
532-190
X/Y-axis travel
200x100mm
250x150mm
300x200mm
Scale Resolution
0.0005mm
X-Y Stage Measuring
Accuracy at 20ᵒC
(2+L/200) μm L : measuring length
Observation Image
Obverse image (Erect Image is available)
Optical Tube
Reticle projection method, with TV port,
Fixed optical path: eyepiece/TV = 50:50, depression: 25ᵒ
Eyepiece Tube
Binocular Eyepiece: WF10/20
Objective Lens
Standard delivery 5x, 10x, 20x, 50x; Optional: 100x
Contour illumination
Adjustable LED
Surface illumination
Adjustable LED
Z - Axis Travel Range
Standard focus travel: 150mm, 200mm is optional
Z - Axis Focusing
Manual focusing (Coarse/fine)
X-Y Stage Floating
Function
Quick release mechanism
Display Unit Funtion
Zero setting, Direction switching, Data output via RS-232
Power Supply
AC220/50HZ; AC110V/60Hz
CCD Chip
Wafer Observation
Hight-Precision Rotary Table RT4 (D: 165mm), RT5(262mm)
Digital Readout DP300
Optional Accessorise
Quick Measuring Software QM2.0
CCD adapter and CCD camera
IC Package
Optical Specifications:
Name
10
Objective
Eypiece WF10/22
N.A.
W.D.(mm)
f(mm)’
R(μm)
± Δp(μm)
Magnification
Visual Field (mm)
5x
0.15
0.15
40
2.1
16.3
50x
₵4.4
10x
0.3
0.3
20
0.9
3.1
100x
₵2.2
20x
0.4
0.4
10
0.69
1.8
200x
₵1.1
50x
0.8
0.8
4
0.34
0.4
500x
₵0.44
100x
0.8
0.8
2
0.34
0.2
1000x
₵0.22
FOG Observation
Precision Measuring Tools
ZHAOSCHNEIDER
eco Smart View 200-300
2D Image Processing CMM
MESSTECHNIK
Germany Made
Special Features
• Table top for measuring small work pieces
• Base and stage made of steel
• Available as manual or CNC driven version
• Standard configuration includes image processing
system and measuring sortware
Technical Specifications of the eco Smart View Series
Type
Measuring Range
eco Smart View 200
eco Smart View 300
X
mm
200
300
Y
mm
100
200
Z
mm
100
100
Stage
Metal with 2 T-slots
Manual (Standard) / CNC-controlled (Option)
Stage driving system
Objective
Manual zoom objective (Standard) / Auto zoom objective (Option)
Magnification
1x - 5x
Image field
mm
6x4.5 - 1.2x0.9
Working distance
mm
83 - 78
1/2” B/W camera, 0.4 Megapixel (Standard / Auto zoom objective (Option)
Camera
Transmitted illumination
Telecentric, long life LED
Surface illumination
Long life LED, section-wise controllable
Co-axial light
Telecentric, long life LED
Digital resolution
Max. table load (ca.)
μm
0.5
kg
20
1)
Length measurement uncertainty
(Din EN ISO 10360-2, VDI/VDE 2617)
Machine dimensions (ca.)
Netto machine weight (ca.)
Power supply
Measuring software
1)
MPEExy = ±(2.0+L/100 mm) μm, measuring length L in (mm)
MPEExy = ±(2.8+L/100 mm) μm, measuring length L in (mm)
W
mm
D
mm
600
740
H
mm
500
830
kg
85
100
220-240 VAC, 50-60 Hz, 500 W
TOPAS MULTI SOFT
Only valid when using the transmitted loght, admissible ambient condition 20ᵒC ±1K, temperature gradient Δth=0.5ᵒK/H
11
Precision Measuring Tools
ZHAOSCHNEIDER
Smart View H Manual / CNC (option)
2D Image Processing CMM
MESSTECHNIK
Special Features
Germany Made
• Granite machine stand and measuring stage, stable structure
• Horizontal structure, horizontal transmitted light path, make
the work of clamping system easily
• Manual / CNC stage driving system
• Cost efficient
• Suitable for the profile measuring of axial work piece, objective
work piece
Technical Specifications of the Smart View H
Type
Smar View H
Measuring Range
X
mm
250
Y
mm
125
Z
mm
100
Stage
High precision granite stage with 2 T-slots
Stage driving system
Manual / CNC
Objective
Auto zoom object with coaxial surface light
Magnification
1x - 5x
Image field
mm
6x4.5 - 1.2x0.9
Working distance
mm
83 - 78
1/2” B/W camera, 0.4 Megapixel
Camera
Transmitted illumination
Telecentric, long life LED
Surface illumination
Long life LED, section-wise controllable
Co-axial light
Telecentric, long life LED
Digital resolution
Max. table load (ca.)
μm
0.5
kg
50
MPEExy = ±(1.8+L/100 mm) μm, measuring length L in (mm)
MPEExy = ±(2.5+L/100 mm) μm, measuring length L in (mm)
1)
Length measurement uncertainty
(Din EN ISO 10360-2, VDI/VDE 2617)
Machine dimensions
Netto machine weight (ca.)
Power supply
W
mm
1000
D
mm
100
H
mm
800
kg
150
220-240 VAC, 50-60 Hz, 500 W
Measuring software
1)
12
Only valid when using the transmitted loght, admissible ambient condition 20ᵒC ±1K, temperature gradient Δth=0.5ᵒK/H
TOPAS MULTI SOFT
Precision Measuring Tools
ZHAOSCHNEIDER
Smart View Manual / CNC (option) 200-300
2D Image Processing CMM
MESSTECHNIK
Special Features
Germany Made
• Arm construction
• Manual / CNC stage driving system
• Touch screen integrated machine advantages of easy
operations and save space
• Lower prices
• Suitable for small high precision workpieces
Smart View CNC
Smart View Manual
Technical Specifications of the Smart View CNC Series
Type
Smar View 200
X
mm
200
300
400
mm
100
200
300
Z
mm
100
100
200
High precision granite stage with 2 T-slots (standard)/Metal with 4 T-slots (option)
Stage driving system
CNC-controlled (option)
Objective
Autozoom objective (option)
Magnification
Manual 1x - 5x / 0.7x - 4.5x (option) Auto zoom
Image field
mm
6x4.5 - 1.2x0.9
Working distance
mm
83 - 78
1/2” B/W camera, 0.4 Megapixe
Camera
Transmitted illumination
Telecentric, long life LED
Surface illumination
Long life LED, section-wise controllable
Co-axial light
Telecentric, long life LED
Digital resolution
Max. table load (ca.)
μm
0.5
kg
20
1)
Length measurement uncertainty
(Din EN ISO 10360-2, VDI/VDE 2617)
Machine dimensions
Netto machine weight (ca.)
Power supply
Measuring software
Smar View 400
Y
Stage
1)
Smar View 300
MPEExy = ±(1.8+L/100 mm) μm, measuring length L in (mm)
MPEExy = ±(2.5+L/100 mm) μm, measuring length L in (mm)
W
mm
940
110
120
D
mm
620
830
1150
H
mm
750
1000
1270
kg
100
200
400
220-240 VAC, 50-60 Hz, 500 W
TOPAS MULTI SOFT
Only valid when using the transmitted loght, admissible ambient condition 20ᵒC ±1K, temperature gradient Δth=0.5ᵒK/H
13
Precision Measuring Tools
Gauging
Germany Made
We are proud to offer our customers “Simply the Finest” in gauges and measurement products. These gauges will
economically verify the dimensional accuracy of your tool holders, spindles and other precision equipment.
Quality gauging demands high precision gauge masters, at Diebold we make our own to satisfy this need. Our plant has
gauge masters calibrated and certified by some of the world`s most reputable calibration institutes. All of the masters
that we manufacture are certified and traceable to the applicable standard.
By utilizing Diebold Gauging you can be sure you will get the most out of your investment!
ThermoGripTM Shrink Techology
Pioneering Solutions in High-Tech
Inspection Gauges for HSK Tapers
Pull Force Gauges mechanical and
eletronical
Cam Angle Inspection Gauges
Hight Precision Gauge Master
CentroGrip®
The model range of CentroGrip® combines best possi-ble
runout with a maximum of flexibility. Up to 12 different tool-diameters can be clamped in one adapter via high
precision collets.
Staying flexible and having a runout ≤ 3 µm is now pos-sible.
Shrink Unit Over View:
Site
16 + 17
18 + 19
Unit name
MS502
HS1100
Order number
79.322
79.325
79.326
Clamping range HM
Ø 3-16 mm
Ø 3-32 mm
Clamping range HSS
-
Ø 6-32 mm
Coil
Max. tool length
Cooling type
Max. cool length
Cooling time
Machine interface
Power/capacity
Dimention b x d x h
14
fixed
fixed
160 mm
350 mm
No cooling
No cooling
-
-
300s
300s
SK30 - SK40
HSK25 - HSK63
SK30 - SK50
HSK40 - HSK100
3 kW/ -
11 kW/ -
520 x 350 x 220 mm
600 x 451 x 357 mm
Required accessories
Adaptor
Adapptor
Optional accessories
Length setting unit
Length setting
• Runout of the whole system ≤ 3 μm
• High clamping forces
• Vibration damping
• Rotation-symmetrical clamping nut
• High flexibility
• Only wrench and assembly block is required to tighten
cutting tool
Precision Measuring Tools
Easy_Measure
Handheld Video Measuring Instrument
Italy Made
Camera
3 Mega Pixel Color USB 2.0 - direct connection to the PC
Light receiving lens
Telecentric lens
Field of View (FoV) (mm)
6.5x4.9
25.5x19.2
FoV Diagonal (mm)
8.1
31.9
FoV Area (mm2)
32
490
Magnification*
100x
12.5x
Resolution (μm)
3.25
12.5
Illumination system
Diffused white led light, divided in 4 sectors (90° each) with independent selection
Back light [optional with stand]
Led spot light [optional with arms lights]
Dimensions (mm)
70x250
70x250
Weight (kg)
1.5
1.5
Operation ambient °C
+10 to +40°C
Power supply
110-220 Vac | 50-60 Hz included
PC Device
Not provided [on request]
Measurement points
Manual - Point and Click
Measure buttons
Show Scale Line, Calibrate, Calibrate Table, Decimal, Measurement List, Layer, Delete All, UnLock/Lock,
Select, Line, Parallel, Perpendicular, Rectangle, 2-points Circle, 3-points Circle, Diameter Circle,
Concentric Circle, Polyline, Polygon, Arc, Angle, Point, Annotate, Delete, Cross-Ruler
Color Control
Gamma, Contrast, Saturation, Color Enchancement, Monochrome, White Balance, Area WB, Black
Balance, FlatFielding, Red, Green, Blue
Image Control
Exposure Control, Color Control, Fluorescence, Levels, Capture Mode, Parameters
Image Processing
Brightness, Gamma, Contrast, Saturation, Sharpen, Levels, Extend DoF, Stitching, HDR image
Available Image Types
JPEG, BMP, TIFF, RAW
Data Report
*.xls, *.txt
Print Report
Windows installed Printer (optional *.pdf), *.xps
Language interface
English, Italian
System Requirements
OS: Windows XP/Vista/7/8 (32 & 64 bit) - CPU: Intel Processor (Core 2 Duo or higher)
Memory: 2 GB or More recommended - USB ports: USB2.0 Hi-Speed port
TOOL MASTER Lite
Vertical Pulsa
Handheld Video Measuring Instrument
Swiss Made
Instrument useful for verification of the
perpendicularity of gear’s channel.
Axis “X” and “Z”
Italy Made
EQUIPMENT
• High concentricity
thanks to needle bearing
• Maximum measuring
repeatability
• Smooth recirculating
ball bearing guides
Price : 139,900.Technical Data:
• Surface made in hardened stainless steel inox tempre
• Inside and outside measurements
• Fast, precise and safe measurements
• Axis horizontal range 28 mm
• Axis vertical range 28 mm
• Adjustable measuring force 0-10 N
• Repeatability +/- 0,001 mm
• Vertical regulation with ring system
• Interchangeable accessories
• Dial gauge 0,01
• Ball probes ø 10 mm (art. TS 81260)
• Ball probes ø 20 mm (art. TS 81660)
• Work piece supports pair
Article
Axix X
Axix Z
Code
• Dial indicator extesion
VERTICAL
0-200
0-25
90005V
• Delivery hard case
PULSAR
Location in production
Workbench
Measuring range
250 / 0 ….300
Axis fi xation
Mechanics
Fine adjustment
In the X-axis
Tool mounting
Needle bearing SK 50
Measuring method
Measuring probe
Dimensions
420 x 150 x 590 mm / 23 kg
Power supply
Battery (type AA)
28
256
244
440.5
Kg
12,700
15
Inspection & Testing Product
RT STROBE qbLED
RT STROBE super qbLED
Ultra-efficient hand-held stroboscopes for precision measurements
Germany Made
qbLED
Number of LEDs
Frequency range
super qbLED
qbLED
super qbLED
40
118
30 - 300,000 flashes per minute
Display
LCD, multiline
Accuracy
±0.02 % (±1 digit / ±0.025 μs)
Resolution
± 0.1 (30.0 ... 999.9 FPM)
± 1 (1,000 ... 9,999 FPM)
± 10 (10,000 ... 300,000 FPM)
External trigger input
3 - 30 V / max. 5 mA (isolated optocoupler)
DIN 41524 5-pin standard connector
Uout = 24 VDC, 60 mA
Certifications
EMV / EMC 2004/108/EG; 2006/95 EG;
DIN EN 61010-1:2011;DIN EN 62471:2009; CE;
DIN EN 60825-1:2008 (Version super qbLED)
Light duration
Adjustable
Light intensity
approx. 1,750 Lux @ 1° / approx. 8,000 Lux @ 1° /
300 mm (12 inch)
300 mm (12 inch)
Flash colour
approx. 5,000 - 8,000 K
Power supply
Integrated lithium-ion batteries
Continuous use time
approx. 7:00 h
@ 0.500° (~875 Lux),
approx. 4:00 h @
2,000 Lux (1,140°)
Material
Dimensions
Weight
Temperature
Type of protection
16
approx. 2:30 h
@ 0.500° (~4,000 Lux),
approx. 5:00 h @
2,000 Lux (0,250°)
Aluminium
150 x 130 x 112 mm / 6.0 x 5.1 x 4.4 inch
approx. 1,050 g
approx. 1,150 g
0 - 40 °C / 32 - 104 °F
IP30
Scope of application for the RT STROBE qbLED
and RT STROBE super qbLED
Textile industry > Setting up and monitoring processes
in all areas of production and finishing.
Paper production > Setting up and quality monitoring of
systems in operation.
R&D > Testing and controlling the behaviour of
materials, adhesives, composite systems etc. at high
speeds, e.g. in the development of washing machines.
Acoustics > Testing and monitoring resonance and
oscillation behaviour.
General machinery > Setting up, monitoring and quality
assurance, as well as diagnosis of systems in operation.
Metal foil production > Visualisation of surface damage.
General production machinery > Monitoring and
testing of high-speed processes.
Printing industry > Monitoring printing results, even in
poor lighting conditions.
Automotive industry > Visualisation of the oscillation of
vehicle components at different rotational speeds.
General > Contact-free measurement of rotational
speed or frequency of moving objects. Ideal illumination
tool for high-speed video recordings.
Inspection & Testing Product
Hand-Held Tachometers
Multi-functional tool for contact and non-contact measurement
RHEINTACHO’s tried and tested digital hand-tachometer record rotational speeds and run lengths.
Germany Made
for elevator/rope
measurement
The digital hand tachometers are just as useful when setting up plants and machinery as during service jobs, monitoring manufacturing processes or in development laboratories. Example applications include measuring the rotational
speeds of engines, pumps and turbines, as well as of mixers, centrifuges and conveyors; it can also measure the
velocities and lengths of all kinds of sheets and belts
General parameters
Accuracy
±0,02% v. Messwert ± 1 Digit
Measuring Ranges rpm
optical 1…99999 min-1
mechanical 1…19999 min-1
Lenght
0…99999 m/0…99999 ft/0…99999 in
Sensing Distance (optical)
max. 600 mm (24 in)
Speed
U = 0.1 m
U = 6”
U = 12”
m/min
0.10…1999
0.10…1524
0.40…609.6
ft/min
0.40…6550
0.40…5000
0.40…2000
in/min
4.00…78700
4.00…60000
4.00…24000
m/sec
0.10…33.30
0.10…25.40
0.10…10.16
ft/sec
0.10…109
0.10…83.33
0.10…33.33
Operation
Battery type
2x AA Battery or rechargeable
Operating Temperature
0...+50°C (32 ..122°F)
Storage Temperature
-20...+70°C (0...160°F)
Ecotach
Your durable, hand-held optical tachometer for checking rotational
speeds quickly and accuratelys
Price : 5,990.-
Accuracy
+/- 0.02 % of reading (+/-) 1 digit
Measuring range
1 ... 60,000 rpm
Measurement distance
Max. 450 mm / max 18 in
LCD
Reading to 5 decimal places (with floating decimal
point). Indicators for RPM, On Target and Low
Battery condition.
Reading hold geature
display automatically holds last reading
Automatic shut down
Shuts down automatically 30 seconds after last use
Battery type
2 x AA batteries or rechargeable cells
Battery life
40 hours (continuous operation)
Operating temperature
0 ... +50oC / 0... +122 F
Material
ABS
Dimensions
145 x 60 x 28 mm. / 5.71 x 2.36 x 1.10 in
Weight
147g (inc. batteries)
17
Inspection & Testing Product
Double Sheet Detection Systems
• Inspection of Sheet Thickness and output of a warning signal when detecting Double Sheet.
• Protects your machinery from expensive tool damage and loss of production.
• การตรวจสอบความหนาของแผ่นและ ส่ งสัญญาณเตือนเมื่อตรวจพบการซ้อนแผ่น
• ป้ องกันเครื่ องจักรไม่ไห้เกิดความเสี ยหายจากการช�ำรุ ดของอุปกรณ์และการสูญเสี ยจากการผลิต
Germany Made
Single Side
contacting sensors
Dual Head
non-contacting sensors
Edge Detection
non-contacting sensors
Dual Head Optical
non-contacting sensors
C-Frame
non-contacting sensors
Recommended for
destacking robots
Recommended for
conveyor belts
Recommended for
destackers
Recommended for highspeed
conveyor belts / very small parts
Recommended for centering
stations at bending machines
แนะน�ำใช้กบั Robot แยกแผ่น
แนะน�ำใช้กบั สายพานล�ำเรี ยง
แนะน�ำใช้กบั เครื่ องแยกแผ่น
แนะน�ำใช้กบั สายพานล�ำเรี ยงความเร็ วสูง /
ชิ้นงานเล็กมากๆ
แนะน�ำใช้กบั จุดที่วางตรงกลางของเครื่ องดัด
เข้ารู ป
เซ็นเซอร์แบบสัมผัสด้านเดียว
เซ็นเซอร์แบบไม่ตอ้ งสัมผัส
แบบสองหัว
For better understanding:
การตรวจหาขอบแบบไม่ตอ้ งสัมผัส
เซ็นเซอร์แบบไม่ตอ้ งสัมผัส ชนิด
ออพติคอลแบบสองหัว
R100
► Measuring range refers to 1 sheet.
รู ปทรงตัวซี แบบไม่ตอ้ งสัมผัส
R100
► Steel also applies to magnetic stainless steel.
► Measuring ranges for many other metals
are listed in the manuals.
► Many other sensors with their measuring
เพือ่ ความเข้ าใจทีด่ ขี นึ้
• ช่วงการวัดอ้างอิงที่หนึ่งแผ่นเสมอ
• นอกจากเหล็กสามารถใช้ตรวจโลหะที่เป็ นสเตนเลสได้
• ช่วงการวัดของโลหะชนิดอื่นๆ สามารถหาดูได้ในคู่มือ
• เซ็นเซอร์แบบอื่นพร้อมช่วงการวัดของแต่ละรุ่ น
สามารถหาได้ในคู่มือ
• เวลาที่ใช้ในการวัดขึ้นอยูก่ บั ความหนาของชิ้นงาน
และลักษณะการท�ำงาน โปรดดูคู่มือเพิ่มเติม
A100
I100-S-WI
Technology
Permanent magnetic
Sensor
T04
TN40S
Steel magn. [FE]
0.04 ... 1 mm
0.3 ... 4 mm
Aluminum [NF]
--
--
Stainl. steel aust [NF]
--
--
--
--
Non-metals
Technology
Inductive transmission process
Sensor
WI42GS
Meas. range
on material thickness and operation mode;
see our manuals for further details.
Meas. range
ranges are described in our manuals.
► The measuring time may change depending
Steel magn. [FE]
0.15 ... 0.4 mm
Aluminum [NF]
0.5 ... 3 mm
Stainl. steel aust [NF] 0.5 ... 3 mm
Non-metals
--
Air gap
0
Air gap
Max. 2 mm
Particularity
Sheet is attracted by the sensor
Particularity
Distance to the sheet up to 2 mm possible
Measuring time
15 ms
Measuring time
30 ms
Double Sheet Detection Systems
Compact Unit R100
THE ROLAND PLUS
• Cost-effective solutions for many industries.
• One side contacting or Double-sided non-contacting measurement.
• Fast reaction.
► Alpha numeric display
► 3 switching outputs
► Teach-In function
• เป็ นโซลูชนั่ ที่มีประสิ ทธิภาพส�ำหรับอุตสาหกรรมต่างๆ
• สามารถท�ำการวัดได้ท้ งั แบบ ไม่ตอ้ งสัมผัสแบบทั้งสองด้าน หรื อแบบสัมผัสเพียงด้านเดียว
• ตอบสนองได้รวดเร็ ว
• จอแสดงผลแบบตัวเลข
• มีช่องสัญญาณออก 3 ช่อง
• มีฟังก์ชนั่ สอนเครื่ องท�ำงาน
Compact Units R100
1 Sensor channel
1 Program
3 Outputs / 1 Input
Cable length maximum 20 m
R100
R100
I100
Eddy Current
Technology
Inductive transmission process
Technology
Capacitive
Sensor
AA90X60-453F2S
AA150X100-902F8S
Sensor
S/E34
S/E75
Sensor
Steel magn. [FE]
0.2 ... 4 mm
0.4 ... 8 mm
Steel magn. [FE]
0.05 ... 1 (1.5) mm
0.1 ... 3 (4) mm
Aluminum [NF]
0.2 ... 4 mm
0.4 ... 8 mm
Aluminum [NF]
0.2 ... 6 mm
3 ... 5 (15) mm
Stainl. steel aust [NF] 0.2 ... 4 mm
0.2 ... 8 mm
Non-metals
--
--
Air gap
5 mm
15 mm
Particularity
Measuring time
C100
C100-10S
C100-20S
Steel magn. [FE]
0.2 ... 3.5 mm
0.4 ... 7 mm
Aluminum [NF]
0.2 ... 3.5 mm
0.4 ... 7 mm
Stainl. steel aust [NF] 0.2 ... 3.5 mm
0.4 ... 7 mm
Non-metals
--
--
Air gap
10 mm
20 mm
Meas. range
Meas. range
XA100 + AA Eagle Eye
Technology
Meas. range
18
R100
Stainl. steel aust [NF] --
--
Non-metals
--
--
Air gap
10 ... 40 mm
30 ... 60 mm
Sensor with 20 mA analog output
Particularity
Sensor Distance up to 80 mm
Particularity
Double Sheet Detection and Thickness Meas.
< 20 ms
Measuring time
18 ... 75 ms
Measuring time
500 ms
Inspection & Testing Product
Double Sheet Detection Systems
Mudular Units R1000
• R1000 Systems are optimized in all their components to
achieve highest security and reliability.
• Perfect for Press Lines with fast cycle times.
• 9 of the 10 of the world’s largest automotive manufacturers use R1000.
• R1000 ระบบรุ่ นนี้เหมาะกับงานได้หลากหลาย เพื่อให้ได้งานที่ปลอดภัยสูงสุ ดและน่าเชื่อถือ
• เหมาะที่สุดส�ำหรับการผลิตขึ้นรู ปแบบอัดที่เร็ วมากๆ
• 9 ใน 10 ของผูผ้ ลิตรถยนต์รายใหญ่ที่สุดในโลกใช้รุ่น R1000 อยู่
THE ROLAND PLUS
► Full control by PLC
► All leading Fieldbus Interfaces
► Dynamic Measurement and Teach-In
Germany Made
• ควบคุมการท�ำงานทั้งระบบด้วย PLC
• สามารถรองรับอินเตอร์เฟส Fieldbus ชั้นน�ำ
ได้ท้ งั หมด
• มีการวัดแบบไดนามิกและฟังก์ชน่ั สอนเครื่ อง
Modular Units R1000
255 Programs
1 to 4 Sensor channels
Parallel interface to the PLC, 9 Fieldbus Systems
Cable length maximum 50 m
R1000
R1000
UDK20
Sensor
P42AGS
P128GPPS
Steel magn. [FE]
0.2... 4 mm
1... 12 mm
Aluminum [NF]
--
--
Stainl. steel aust [NF] --
--
Non-metals
--
--
0 mm
0 mm
Air gap
I20
Technology
Electro magnetic + Inductive
Technology
Eddy Current
Sensor
PW42AGS
Sensor
IS/IE20-30GS
IS/IE42-30GS
Steel magn. [FE]
0.05 ... 4 mm
0.15 ... 8 mm
Aluminum [NF]
0.05 ... 5 (16) mm
0.1 ... 10 (16) mm
Steel magn. [FE]
0.2 ... 4 mm
Aluminum [NF]
0.2 ... 4 mm
Meas. range
Electro magnetic
Meas. range
Technology
Meas. range
E20
R1000
Stainl. steel aust [NF] 0.2 ... 2 mm
Non-metals
Air gap
-0 mm
Stainl. steel aust [NF] 0.2 ... 5 (16) mm
Non-metals
Air gap
0.4 ... 10 (16) mm
--
--
40 mm
80 mm
Particularity
Wall mount enclosure or font panel mounting Particularity
Wall mount enclosure or font panel mounting
Particularity
Wall mount enclosure or font panel mounting
Measuring time
80 ms (at 4 mm Steel)
80 ms
Measuring time
Starting from 2 ms
Measuring time
Sensor Brackets
THE ROLAND PLUS
• Spring loaded sensor brackets for various applications.
The following overview indicates the advantages of each sensor bracket.
► High Flexibility
► Minimal wear
► Low weight
• ที่ใส่ ยดึ เซ็นเซอร์มีสปริ งส�ำหรับการใช้งานต่างๆ ตัวอย่างต่อไปนี้จะแสดงถึงข้อดีของแต่ละรุ่ น
SHX 42
SHS42GS
SHS42G-FB
SH42GS
For vertical
destacker
+
+
+
+
For robot loader
and high speed
linear destackers
+
o
+
--
For inclined
sheet stacks
++
o
+
-
Suction delay
time
0.1 s
0.1 s
0.5 s
---
Notes
highest spring travel.
Rigid during approach
For high lateral
acceleration (< 2g)
Strong hold on even
sheets due to suction
cup
• มีความยืนหยุน่ สูง
• ทนทาน
• น�้ำหนักเบา
Suited for utmost sensor For narrow sheets and
contact on inclined or
applications where
undulated sheet stacks
weight is critical
R1000
L20
SHX42
Laser triangulation
Sensor
LAAS40(+)
Meas. range
Technology
SHS42GS
SHS42G-FB
SH42GS
Spring loaded sensor
Spring loaded sensor bracket
with bellow suction cup
Spring loaded sensor
bracket
Suited for: P42GS, P42AGS, PW42GS, PW42AGS
Steel magn. [FE]
0.3 ... 15 mm
Aluminum [NF]
0.3 ... 15 mm
Sensor mounting: Thread M42 x 1.5
Stainl. steel aust [NF]
0.3 ... 15 mm
Total height (unloaded)
120 mm
114 mm
128 mm
69 mm + Sensor
Non-metals
0.3 ... 15 mm
Spring travel (approx.)
70 mm
26 mm
37 mm
26 mm
Air gap
40 mm Sensor distance
Particularity
Measuring time
10 ms
Weight
0.85 kg
1.2 kg
1.2 kg
0.7 kg
Press. force (at 1/2 spring travel)
approx. 25 N
approx . 48 N
approx. 60 N
approx 48 N
Ø of suction cup
110 mm
110 mm / 85 mm (SHS42GS-85) 110 mm / 80 mm (SHS42GS-FB80)
--
19
Inspection & Testing Product
Weld Seam Detection Systems
• Detection of the Position of a Weld Seam by Flux Leakage or by Eddy Current.
• For all tube processing machinery that require a precise weld seam position.
• For all punching and cut to length facilities working with welded coils.
• การตรวจจับต�ำแหน่งของแนวเชื่อมจากสารเชื่อมด้วยวิธี Eddy Current
• ส�ำหรับท่อทุกชนิดในกระบวนการผลิตที่จำ� เป็ นต้องรู ้ตำ� แหน่งของแนวเชื่อมที่แน่นอน
• ส�ำหรับงานปั้ มขึ้นรู ปทัว่ ไปและตัดเพื่อให้ได้ความยาวกับการท�ำงานกับขดม้วน
Longitudinal Weld Seam
detection at tubes
Longitudinal Weld Seam
detection at drums
Germany Made
THE ROLAND PLUS
• การตรวจจับแนวเชื่อมที่มองไม่เห็น
► Detection of invisible Weld Seams
► Highest reliability against wrong positioning • มีความน่าเชื่อถือสู งสุ ดกับการวางต�ำแหน่งที่ไม่ถกู ต้อง
► Easy adaptation to different tubes
• น�้ำหนักเบา
Cross Weld Seam
detection at coils
Cross Weld Seam
Butt Weld Seam and Butt
detection of narrow strips Joint detection at Tubes
การตรวจสอบท่อ รอยเชื่อมในแนว
ยาว
การตรวจสอบท่อที่ใหญ่ๆ รอยเชื่อม
ในแนวยาว
การตรวจสอบขดลวด รอยเชื่อมใน
แนวขวาง
การตรวจสอบชิ้นส่ วนเล็กๆ แคบๆ
รอยเชื่อมในแนวขวาง
Recommended for
Automotive Industry
Recommended for
Metal Packaging Industry
Recommended for
Steel Service Centers
Recommended for
Stamped Parts Manufacturers
Recommended for
Tube and Pipe Coating Plants
แนะน�ำส�ำหรับอุตสาหกรรมยานยนต์
แนะน�ำส�ำหรับอุตสาหกรรมบรรจุภณั ฑ์โลหะ
แนะน�ำส�ำหรับศูนบริ การเหล็ก
แนะน�ำส�ำหรับผูผ้ ลิตชินส่ วนปั้ มอัดขึ้นรู ป
แนะน�ำส�ำหรับการผลิตสายเคเบิ้ลและท่อ
SND40 for Tubes
SND40 for Coils
SND8S + NS11
Technology
Flux Leakage and Eddy Current
Technology
Flux Leakage and Eddy Current
Technology
Material
All metals [FE and NF]
Material
All metals [FE and NF]
Material
Wall thickness 0.1 ... 12.5 mm
Diameter
5 ... 1000 mm
Steel, tinplate
Mat. thickness Depending on material
Wall thickness 0.1 ...
Material width
Min. 100 mm
Diameter
50 ... 1000 mm
Rotation speed 1 ... 300 U/min or 0.01 ... 10 m/s
Velocity
0.01 ... 10 m/s
Velocity
0.01 ... 5 m/s
Type of
Weld Seam
Type of
Weld Seam
All weld seams
Type of
Weld Seam
All except laser weld seams
All weld seams
Weld Seam Detection System
• Send your sample to the ROLAND Application Laboratory and you will receive a report about which device
combination will fit best tasks.
• Wide range of applications for our systems:
Automotive / Metal packing / Construction vehicles / Steel Service Center /Steel Furniture / Lighting ...
• ส่ งชิ้นงานตัวอย่างมาที่หอ้ งทดลองของ Roloand ท่านจะได้รับค�ำแนะน�ำว่าควรจะเลือกใช้อุปกรณ์รุ่นใดให้เหมาะกับงานของท่านมากที่สุด
• เรามีอุปกรณ์ที่สามารถใช้ได้กบั งานที่หลากหลายมาก เช่น ด้านยานยนต์/ ด้านบรรจุภณั ฑ์โลหะ/ ด้านรถบรรทุกก่อสร้าง/ ด้านศูนย์บริ การเหล็ก/ ด้านเฟอร์นิเจอร์เหล็ก/ ด้านการแสง
สว่าง ...
20
XA100 + NS9N-AAD-SC
UFD40
Technology
Eddy Current
Technology
Eddy Current
Material
All metals (FE and NF)
Material
All metals
Mat. thickness
0.5 ... 4 mm
Wall thickness Up to solid material
Material width
5 ... 30 mm
Diameter
1 ... 90 mm
Velocity
Max. 5 m/s
Velocity
0.01 ... 10 m/s
Type of
Weld Seam
All
Type of
Weld Seam
All
We are also specialized in:
Butt Weld Seam and Butt Joint detection at sheets
► Recommendation for equipment of surface
finishing and coating
Cable connections at strands and cables
► Recommendation for cable production
Inspection & Testing Product
Sheet Thickness Measuring Systems
• Continous measurement of thickness of ferrous and non-ferrous metals by proven technologies.
• For blanking presses, slitting lines, cut-to-length lines, scroll shears and other coil processing
machinery.
THE ROLAND PLUS
• Non-contacting sensors, laser based.
• การท�ำเกจความหนาตามแนวขวาง
► Traversing thickness gauging
• การวัดต่อเนื่องขอโลหะเหล็กและที่ไม่ใช่เหล็กด้วยเทคโนโลยีที่ได้รับการรับรอง• ส�ำหรับ
ท่อทุกชนิดในกระบวนการผลิตที่จำ� เป็ นต้องรู ้ตำ� แหน่งของแนวเชื่อมที่แน่นอน
• ส�ำหรับการผลิตแผ่นปั้มขึ้นรู ป การผลิตแบบตัด การผลิตตัดตามขนาดความยาว การผลิต
แบบเฉื อนตัดม้วนกระดาษและเครื่ องจักรในขบวนการผลิตแบบม้วนขดอื่นๆ
• เซ็นเซอร์แบบไม่ตอ้ งสัมผัส บนพื้นฐานของเลเซอร์
Single Side Measuring
sensors
C-Frame
non-contact
MDM60
► Integrated guiding
► Full automatic calibration (nulling)
Germany Made
• รางวิง่ ติดตั้งในระบบ
• มีการสอบเทียบแบบอัตโนมัติแบบเต็มรู ปแบบ
With Traversing
Unit
i!mensio Compact
i!mensio Mono/Smart
Technology
Magnet Inductive
Technology
Laser Triangulation
Technology
Laser Triangulation
Material
Steel, magnetic [FE]
Material
All metals
Material
All metals
Measuring range
0.05 ... 1.5 mm
Measuring range
0.2 ... 20 mm
Measuring range
0.2 ... 20 mm
Resolution
1 µm
Resolution
0.1 µm
Resolution
0.1 µm
Accuracy
1% v. MW
Accuracy
+/- 3 µm (Linearity)
Accuracy
+/- 4 µm (Linearity)
Traversing area
--
Traversing area
150/300/450 mm
Traversing area
150/300/450 mm / up to 1100 mm
Integrated guiding
--
Integrated guiding
Integrated
Integrated guiding
No, required by the ambient installation
Autom. inline calibr.
No
Autom. inline calibr.
Yes
Autom. inline calibr.
Yes
Non Destructive Material Testing
THE ROLAND PLUS
► Double-Sided 3D scanning
►
► Secure quality control
Weld Seam Geometry Inspection
• Inspection of mechanical weld seams for pores, craters,cracks
and geometrical irregularieties.
• Inspection performed by 3D laser sensors, which are transported
over the finished weld seam and therefore scan the surface and
the geometry from one or both sides.
• The comprehensive TIVIS® software package logs and evaluates
the recorded 3D data regarding faults and other deviations.
• การตรวจสอบของแนวเชื่อมเพื่อหารู หรื อช่องว่างที่ผวิ งาน รอยร้าว และความผิดปกติของแนวเชื่อม
• การตรวจสอบโดยใช้เซ็นเซอร์แบบเลเซอร์ 3D ที่ถกู น�ำไปสแกนแนวเชื่อมชิ้นงานที่เสร็ จแล้วและ
สแกนด้านเดียวหรื อทั้งสองด้านผิวชิ้นงานและดูวธิ ีการวางชิ้นงาน
• ชุดซอฟท์แวร์ TIVIS ท�ำการบันทึกและประเมินผลข้อมูลแบบ 3D ที่ได้บนั ทึกไว้ในเชิงของเสี ย และ
ความเบี่ยงเบนอื่นๆ
EHR® AluCheck
OSI40
Technology
Laser triangulation
Technology
Laser triangulation
Application
Mechanical weld seams on Aluminum or Steel
Application
PC based system for surface inspection with TIVIS® software
Sensor types
2D, 2D/3D, 3D, transmitted light, incident light
Display
21” Full HD
Sensor channels
2x Cameralink, 1x GigE
Operation
Touchscreen, mouse, keyboard
Visualization
Touchscreen PC
Sensor channels
GiGE to EHR® AluCheck
Robot connection
Fieldbus
PLC connection
Fieldbus
Working ares
137.5 mm, working distance, +/- 10 mm
Host connection
Ethernet Gigabit
I/O channel
Nanotec, Linear axis
21
Inspection & Testing Product
ESM303
Motorized Test Stand w/PC Control
U.S.A. Made
Standard Features:
• Selectable speed setting
• Upper and lower travel limit switches
• Adjustable, removal controller with intuitive menu navigation
• Password protection of test parameters
• Stepper motor-driven, producing smooth and quiet operation with
no speed variation under load
• USB output of force vs. time or force vs. travel
• Compact footprint, suitable for crowded workbenches
• Ergonomic design, with smart, clean cable management
• Integrated electronics assembly, easily removed and transported
Specifications:
Load capacity:
< 24 in [610 mm]/min:
> 24 in [610 mm]/min:
300 lbF [1.5 kN]
200 lbF [1 kN]
Speed range:
Standard:
Optional:
0.5 - 13 in/min [13 - 330 mm/min]
0.02 - 45 in/min [0.5 - 1,100 mm/min]
Maximum travel:
18.0 in [457 mm]
Speed setting accuracy:
±0.2%
Speed variation with load:
±0% [Stepper motor driven]
Travel accuracy:
±0.002 in per 10 in [±0.05 mm per 250
mm]
Travel resolution:
0.001 in [0.02 mm]
Limit switch repeatability:
±0.001 in [0.03 mm]
Power:
Universal input 80-240 VAC, 50/60 Hz
Weight:
56.5 lb [25.6 kg]
Ordering Information:
Hardware
Typical Applications:
ESM303
Motorized test stand,110V*
09-1214
Interface cable, gauge / indicator to ESM303
09-1158
USB output cable
AC1062
Load cell / indicator mounting kit
ESM303-001-1 / -2 / -3
Single column extension, 6 / 12 / 24 in. [150 / 300 / 600 mm]
ESM303-002-1 / -2 / -3
Double column extension, 6 / 12 / 24 in. [150 / 300 / 600 mm]
AF008
FollowMeTM force-based manual positioning
AF009
Travel indication, with USB output
AF010
Computer control, via USB
AF011
Programmable travel limits
AF012
Integrated overload protection
AF013
Auto return
AF014
Cycling / dwell time
AF016
Independent up and down speeds
AF017
Extended speed range, low
AF018
Extended speed range, high
AF019
Break detection
AF020
Load holding
AF021
Preload / sample touch
AF022
Profiles
AFCOMP
Complete options package
(includes all Controller Options, plus 09-1124 and 09-1158
cables)
Controller Options
* ESM303 contains a universal power supply (80 - 240V) and includes a power cord with US
plug. Add suffix ‘E’ for Euro plug, ‘U’ for UK plug, or ‘A’ for Australian plug. Ex: ESM303E
22
Inspection & Testing Product
ESM303
U.S.A. Made
Motorized Test Stand w/PC Control
Simple controller interface
Indicator / load cell adapter
Modular design
Single column extensions
FollowMeTM
Double column extensions
MESURTM gauge data
collection software
WT3-201M
Features
Wire Crimp Pull Tester
• Measures real-time and peak force values
• Selectable test speed, w/high speed approach and reverse
• Auto-start upon sample insertion
• Auto-reverse at sample break or load
• USB, RS-232, Mitutoyo (Digimatic), and analog outputs
• Automatic reverse / output / data storage / zeroing upon sample break
helps automate testing processes
• 2,000-point data memory with statistics, output, and date and time stamp
(date and time stamp is optional)
• Password protection prevents unauthorized changes
• Pass / fail indicators, audio alerts, and outputs
• Save and recall up to 500 profiles for various test requirements (optional
function)
• Pull to a specified load or maintain load for a specified period of time, as
per UL 486A/B (optional functions)
• Date / time stamp for all saved data (optional function)
159,000.Specifications:
Force Capacity:
200 x 0.1 lbF | 3200 x 2 ozF | 100 x 0.05 kgF | 1,000 x 0.5 N | 1 x 0.0005 kN
Accuracy:
±0.2% of full scale
Wire dia. range:
AWG30 - AWG 3 [0.01 - 0.25 in (0.3 - 6.3 mm)]
Sample length range:
Minimum 6.5 in [165 mm], excluding termination
Max. elongation:
1.7 in [43 mm]
Speed range:
Test speed: 0.4 - 12.0 in/min [10 - 300 mm/min]
Approach/reverse speed: 13.0 - 96.0 in/min [325 - 2,400 mm/min]
Speed setting accuracy:
±0.2%
Speed variation with load:
±0% [Stepper motor driven]
Power:
Universal input 80-240 VAC, 50/60 Hz
Sampling Rate:
7,000 Hz
Outputs:
USB / RS-232: Configurable up to 115,200 baud.
Mitutoyo: Serial BCD suitable for all Mitutoyo SPC-compatible devices.
Analog: ±1 VDC at capacity, ±0.25% of full scale.
General purpose: Three open drain outputs, one input.
Set points: Three open drain lines.
Safe overload:
150% of full scale (display shows “OVER” at 110% and above)
Weight:
26.5 lb [12.0 kg]
Included items:
Power cord, quick-start guide, USB cable, resource CD (USB driver, MESURTM Lite software, MESURTM
gauge DEMO software, and user’s guide), and NIST-traceable certificate of calibration.
Environmental requirements:
40 - 100°F, max. 96% humidity, non-condensating
23
Inspection & Testing Product
Eagle 3000
AUTOMATIC HARDNESS TESTERS
Swiss Made
EAGLE 3000 is able to perform hardness testing
with test forces in the range 306.5 N a 29420 N
(from 31.25 to 3000 kgf) in accordance with the
standards DIN EN ISO 6506, ASTM E10 for
Brinell tests and allows to easily select the test force.
EAGLE 3000 can send data to a printer or on a
network. Every impression’s image can be stored
allowing a measure checking even long after the
test.
EAGLE 3000 allows to set up the interface in
English, French, German or Italian. Further
languages are available on request.
EAGLE 3000 is conceived to allow repairing and
maintenance in a fast and easy way. The high
precision 45° automatic rotating turret supporting
penetrator and lenses allows to position exactly
the impression’s image on the screen for further
measures.
Technical Specifications:
Working principle
Loads
Load time
Load application method
Objective lenses
Output interfaces
Power supply
Working area dimensions
Norms and certifications
24
Brinell
31.25, 62.5, 125, 187.5, 250, 500, 750,1000, 3000 Kgf (N
306.5, 612.9, 1226,1839, 2452, 4903, 7355, 9817, 29420)
selectable from 3 to 30 sec.
Electric motor with closed loop with load cell
Lenses 0.7 X 3X
USB 2.0, ETHERNET
230 V, 50 Hz (220 VA)
H max 1.200 mm
H max with elevating screw 600 mm
H max without elevating screw 800 mm
P 300 mm
DIN EN ISO 6506, ASTM E 10
Inspection & Testing Product
System 8 Digital Torque Tester
U.S.A. Made
Our most accurate digital torque tester with Fail Safe Engineering!
• Greater accuracy and durability with simplicity and ease of operation
• Floating decimal point, 6 digit display is easy to read
• Accurate to +/- .25% (indicated value) from 10% to 100%
• Over capacity alert and tracking
What good is testing torque tools with a tester that could be out of spec and
you don’t know it? System 8 solves this long standing challenge.
Like all Sturtevant Richmont tools it is built for accuracy and durability and
meets or exceeds the following standards:
• ASME B107.300 - 2010 Electronic Tester, Hand Torque Tools
• ISO 5393 Rotary tools for threaded fasteners- Performance test methods.
• ASME B107.4M Driving and Spindle Ends for Portable Hand, Air, and
Electric Tools (Percussion Tools Excluded).
• ISO 1773 Assembly Tools for Bolts and Screws – Driving Squares for
Power Socket Wrenches and Hand Socket Wrenches.
• ISO 1774-2 Assembly Tools for Bolts and Screws – Driving Squares
for power socket tools
Mechanical Loaders
Features and Benefits:
• Every S/R mechanical loader assures true 90-degree force application to
eliminate force angle error in testing.
• Mechanical advantage reduces technician effort and fatigue, particularly in
high-capacity tool testing.
• The design of each loader makes it very easy to hold direct-reading torque
tools (dial, beam and digital torque wrenches) at a specific and stable torque
during testing.
• Four capacities available; 250, 600, 1,000 and 2000 foot-pounds.
• ML 250 and ML 600 loaders use a swing arm to rotate the tool about the
center of the transducer; ML 1000 and ML 2000 loaders hold the tool in a
stable position and rotate the torque transducer around its center.
• ML 250 accepts an optional Quad Plate for connecting and switching
among up to four transducers quickly and efficiently.
• ML 1000 and ML 2000 use the S/R Quick Connect system for rapid
switching among transducers.
• Two sizes of cart are available for mounting the loader and holding the
tester and transducers
Specification and Ordering Information:
Part No. Model
Description
10168
ML 2000 Mechanical Loader, 2000 ft. lb./2710 Nm capacity
10167
ML 1000 Mechanical Loader, 1000 ft. lb./1355 Nm capacity
10160
ML 250
Mechanical Loader, 250 ft. lb./338 Nm capacity
10431
ML 600
Mechanical Loader, 600 ft. lb./813 Nm capacity
25
Inspection & Testing Product
NG2 OIL FILM SENSOR
Portable oil film thickness measurement equipment
Germany Made
The NG2 oil film sensor measures oil film thicknesses on
metal surfaces
This device uses rubust infrared technology to measure oil film
thicknesses.
All measurement relevant data can be read from the illuminated graphic
display.
Oil files can be measured between 0.1 and 6 µm.
The user can upload his required calibrations from a large selection of
factory calibrations or aided by the calibration wizard of the front end
software he can develop his own tallormade calibrations.
Due to our new EasyCal technology customers can freely excange
these calibrations between different instruments or share with their
customer or suppliers.
Sekf-tests on an intemal set of gold standards monitor the correct and
accurate function of the device.
All parts of the device (display, filter whell, sensor, reference
mechanism, rechargeable battery and electronics) are well protected
by a rugged, rubber coated aluminum housing
Compeling benefits
• Fast, accurate lubricant measurements using infrared technology
• Measurements are taken within one second
• Illuminated, easily readable display for all measurement data
• Easy handing and convenient operation
• Life long waranty on the redeveloped infrared light source
All details at a glance
Power supply:
- 7.2 V, rechargeable Ni/MH battery
- Device runtime with fully charged battery: approx 9 hrs.
Display:
- Illuminated graphic display
- Freely selectable metal surfaces
- Film thickness with error display and/or median value
- Multi-lingual display menu for various display options
Controls:
- On/off button
- Measurement trigger in the carrying handle
- Selection button for metal types and menu operation
Mechanical systems:
- Cylindrical, rubber coated aluminium housing
- Height 22.8 cm
- Diameter 14.5 cm
- Weight 3.4 kg incl. battery
Interfaces:
- RS232 or Bluetooth for PC data transfer (USB adapter and Bluetooth
dongle included)
- DIN connector for internal battery charging or mains operation
26
Inspection & Testing Product
PosiTector SmartLink
Wirelessly connect PosiTector probes to your smart device.
U.S.A. Made
• Intuitive easy-to-use touch screen operation
• Every reading is instantly transmitted to your smart device
• Tri-color LED provides immediate feedback in dark and noisy environments
• Accepts coating thickness, environmental and surface profile probes
• Lightweight and compact design—uses one AAA battery
PosiTector 6000 FXS Xtreme™
Probe for ROUGH and HOT coatings on steel. Our most rugged regular probe
Range:
Accuracy*:
0 - 1500 um
0 - 60 mils
+ (0.05 mils + 1%) 0 - 2 mils
+ (0.1 mils + 1%) > 2 mils
+ (1 um + 1%) 0 - 50 um
+ (2 um + 1%) > 50 um
*Accuracies are stated as a fixed value plus a percentage of the gage’s actual reading.
PosiTector SPG
Digital depth micrometer measures and records peak to valley surface profile
heights.
• Fast measurement rate of over 50 readings per minute - ideal for quickly and
accurately measuring surface profile over large, flat surface areas
• Enhanced one-handed menu navigation
• RESET feature instantly restores factory settings
Certified SPG Standards
• Ideal for use in calibration labs
• Standards consist of 4 sapphire test plates mounted in a precision ground
steel base and supplied in a hard shell case
• Sapphire test plates are individually serialized for traceability to
PTB - includes a Certificate of Calibration
• Certified and labeled in both Metric and Imperial units
• Comes with a Sample Certificate of Accuracy
• Made in U.S.A.
PosiTector DPM
• Large, easy-to-read, graphics LCD
• Enhanced one-handed menu navigation
• No need to consult complex tables or use a slide rule calculator
• Audio and visual alarm – indicates when climate conditions are unsuitable
for painting
• All readings are constantly updated and displayed simultaneously
• RESET feature instantly restores factory settings
27
Inspection & Testing Product
EP 50T
Automatic, hydraulic, mounting press for high performance
Italy Made
• Solid structure in painted stainless steel
• Hydraulic system ( doesn’t need any connection to the air line)
• Easy interchangeable moulds ( from 25,4 mm. up to 50mm. )
• Large range of moulds: 1”(25,4mm) - 30mm - 11/4”(31,8mm) - 11/2”
(38,2 mm) - 40mm - 50mm
• Dual sample capability during each cycle
• Electronics PLC controlled and operated by the “Touch screen” panel
• Creation and storage of programs according to the types of moulds and
to the resins used
• Creation of complex cycles with variable ramps as far as the time is
concerned,
with possibility of adjustment of pressure and temperature
• Option: colour touch screen display of the operating phases, with various
colorations: green/rest - red/active heating - blue/active cooling
• Programmable temperatures up to 200 °C
• Programmable times up to 99 min.
• Adjustable pressure 0 ~ 200 bars with direct reading on digital display
• Heating head with resistance up to 2000W
• Head water cooling System
• Ram control (up - down – still )
• In& out water controlled by electric valve
• Mould bayonette closure System with thermal protection
• Power supply: 220V -50/60Hz
• Dimensions : 400x500x650 mm
• Weight : 60Kg
AP Series
Automatic Polishers
Best quality/price ratio Best quality/price ratio
Powerful equipment
Corrosion, impact resistant
Head rotates at 78rpm
Control panel with Start,Timer and Water on/off
A good sample preparation is essential for
accurate sample analysis. The Hitech Europe
Polishing Machines - AP Series meet all your
needs. Their ease of use, quality of construction,
technical features and convenience are all
fundamental ingredients that make the AP the
best choice for your Laboratory.
MODEL
Sample Holder
Motorized head rotational speed
AP 32/5, 32/3, 32 COMBO
AP 22, 22V/3V
AP 22 Double
Wheel Ø 200 mm.
AP 22/3V Double
Wheel Ø 200 mm.
AP 32/3 Double
Wheel Ø 300mm.
Individual Pressure (3 samples)
fixed 75 rpm
AP 32 COMBO Double
WheelØ 300mm.
Individual
Pressure(5 samples)
Individual Pressure
(5 samples)+ Central
variable 0~75 rpm
fixed 75 rpm
variable 0~75 rpm
Working wheel rotational speed
(clockwise and counterclockwise)
0 ~ 600
Teradrop Jig Samples (central
pressure)
No
4/5/8/10 samples
Sample Holder 3 holes
(Ø 25-30-32-38-40 mm.)
Yes
No
Sample Holder 3 holes
(Ø 50 mm.)
Yes
No
Sample Holder 5 holes
(Ø 25-30- 32-38-40 mm.)
No
Yes
Customized Sample Holder or JIG
28
AP 32/5 Double
Wheel Ø 300mm.
Yes
Inspection & Testing Product
MP Series
Manual Polichers
Italy Made
• Corrosion, heat and impact resistant
moulded cover
• Solid steel chassis and stainless steel
bolts and screws
• Adjustable tap for water flow
• Removable working wheel
200/230/250/300 mm Ø (not included)
• Cover and splash ring
• Adjustable hydraulic unit
• Motor 220V – AC – 0,75kW - 50 Hz
Inverter Controlled Motor, with torque
control variable speed
• Motor 220V – AC – 0,37 Kw – 50 Hz
for fixed speed versions
MP 22V
MP 22
MP 32T
MP 32
Accessories
MP 22T
Model
code
Working wheel rotational
speed
Working Wheel
MP22
Double Wheel
Ø 200 mm
MP22V
Double Wheel
Ø 200 mm
MP32
Double Wheel
Ø 300 mm
MP32V
Double Wheel
Ø 300 mm
MP22T
Double Wheel
Ø 200 mm
MP32T
Double Wheel
Ø 300 mm
02-30-0201-C
02-30-020V-C
02-30-0302-C
02-30-302V-C
02-30-022T-A
02-30-032T-A
300
0~600
300
Working Wheel Rotation
Working Wheel Ø
MP 32T
Paper Clamp
0~600
Clockwise
200/230 mm
Clockwise/Counterclockwise
250/300 mm
200/230 mm
250/300 mm
Analog Electronics
Yes
No
Touch-screen
No
Yes
Automatic Dispenser P 4
By using the easy and intuitive touch screen, it is possible to set the number of pulses per minute and also duration
of each pulse.
The P4T version can be combined with any polishing machine of all brands and models, as an indipendently
programmable unit working in parallel with the machine.
The P4T dispenser, can be supplied as an optional with the automatic polishing machine Hitech Europe AP311/T,
controlled/programmed trough the touch screen of the machine.
TECHNICAL FEATURES:
• Color Touch-screen 3,5”
• 4 programmable peristaltic pumps
• Adjustable telescopic arm
• No. 4 Bottles for fluid
• Cover in resin reinforced shockproof / corrosion
• Power supply 230V - 50 Hz
• Dimensions: 500x200x350
• Weight: 7 Kg
29
Inspection & Testing Product
True Chroome II
Technical Specifications:
Sensor
IMX236
Sensor size
1/2.7” (assemble with Exfocus05
Can achieve 80% field of view
Live Resolution
1920x1080
Frame speed
1920x1080 30fps via USB2.0
1920x1080 60fps via HDMI
Image Record
Video Record
High speed SD Card (8G)
1080p 30fps in SD Card
1080p 30fps in PC
Expouse time
0.001 sec - 10.0 sec
White balance
Auto
Settings
Gain, Gamma, Saturation, Contraction
Built-in software
Cloud 1.0 ver
PC software
ISCapture
Output model 1
USB2.0
Output model 2
HDMI
System Compatible
xp, win7/8, 32/64bit, MAX OSX
optical port
C-Mount
The TrueChrome II camera is a high-quality HD (1920x1080) color camera with the possibility of
direct monitor connection via HDMI and USB2.0 interface.
The significant innovation of the TrueChrome II is makeing the software implant inside the camera.
This forward thinking feature frees users from cumbersome computers and annoying buttons. You
can control the camera by only a mouse directly.
Images and videos can be stored onto an SD card.
The Camera supports Windows XP/7/8, 32/64 Bit and MAC OSX. Camera functions includes:
* Set Exposure Time
* 3D Noise Reduction
* 1080P Video Recording
* Region of Interest (ROI) function
* Store images and Video on SD Card and browse images and videos
* ISCapture Software for live and still image measurement, focus stacking etc.
Sample Images In Full Resolution, Cell Image, Semiconductor Images
30
Inspection & Testing Product
Cutting & Polishing Machine
Polishing Machine BG30
abrasive belt grinding machine
Polishing Machine MP-2B
Grinding/Polishing Machine
Technical Parameters:
• Working Voltage: 220V 50HZ
• Diameter of Polishing Disc: φ203mm speed 50-1000rpm
• Diameter of Grinding Disc: φ230mm speed 50-1000rpm
• Motor: YSS7124, 550W
• Dimensions: 700mm×670mm×320mm
• Weight: 50kg
Technical Parameters:
• Center Distance of Roller: 255mm
• Cooling Water Unit
• Abrasive Belt: width 100mm circumference 920mm
• Speed: 1400rpm
• Surface Speed: 768 m/min.
• Power of Motor: 550W
• Power Supply: 380V 50HZ
Cutting Machine Iqiege-1
Manaul&Automatic Cutting Machine
Cutting Machine Iqiege60
Specimen Cutting Machine
Technical Parameters:
• Input voltage: 380V/50HZ/three phase
• Input power: 3.3KW
• Spindle rotation: 2800RPM
• Max cutting diameter: φ100mm
• Max moving Travel: 145mm
• Max working table Travel: 300mm
• Cutting wheel size: φ350mm x 2.5mm x 32mm
• Dimensions: 900mm × 860mm × 620mm
• Weight: 272kg
Technical Parameters:
• Input voltage: 380V/50HZ/three phase
• Input power: 2.4KW
• Spindle rotation: 2800r/min
• Max cutting diameter: φ60mm
• Cutting wheel size: φ250mm x 1.5mm x 25.4mm
• Dimensions: 700mm × 620mm × 450mm
• Weight: 82kg
CX-9800 Spectrometer
Best choice for metal analysis
Technical Specifications:
Optical System
Eletrical Requirements
Dimension & Weight
• Paschen-Runge strucure
• Voltage: AC 220V, 50Hz
Desktop
Floor version
• High-resolution CCDs
• Temperature: 10°C - 30°C
• Length
830 mm
830 mm
• Grating focus: 350 mm
• Humidity: 20% - 80%
• Width
700 mm
700 mm
• Range of wavelength: 160 - 800 nm
• Purity of Argon: 99.999%
• Height
500 mm
1,450 mm
• Weight
80 kg
120 lg
Hardware
Software
• High speedARM CPU, highspeed synchronicdataacquire
• Automatic spectral calibration
• Ethernet data transmit based on DM9000A
• Powerful Database, checking previous and data
• Digital solid light source
• Output to report
• Opimized ignition parameters
• Customized format of report
• High energy pre-spark technology
• User level manage
• Maximum power: 700w, standby 40W
31
32