Valve Manifolds Type 44 VTSA, Type 45 VTSA-F – Inch Series
Overview
Modular multi-functional valve manifold for up to 32 valves:
– Type 44 VTSA, ISO 15407-2/ISO 5599-2
– Type 45 VTSA-F with optimized flow
Different valve sizes on one valve manifold:
– 0.71 in (ISO 02)
– 1.02 in (ISO 01)
– 1.65 in (IS0 1), type 44 VTSA only
– 2.05 in (IS0 2), type 44 VTSA only
Flow rate: up to 102 scfm
Pneumatic connections with threaded connector or QS fitting
Design optimized for electrical peripherals CPX
Key Features
Multi-pin plug manifold
Max. 32 valve positions/
max. 32 solenoid coils
Parallel modular valve linking via
circuit boards
Any compressed-air supply
Any number of pressure zones
5/2-way valve, double solenoid
dominant switching
2x 3/2-way valve,
normally open
2x 3/2-way valve,
normally closed
2x 3/2-way valve: 1x normally
open, 1x normally closed
5/3-way valve,
mid-position pressurized
5/3-way valve,
mid-position closed
5/3-way valve,
mid-position exhausted
2x 3/2-way valve, normally
open, reverse operation
2x 3/2-way valve, normally
closed, reverse operation
2x 3/2-way valve:
1x normally open, 1x normally
closed, reverse operation
Blanking plate for vacant
position
Electrical multi-pin plug connection,
CageClamp
Electrical multi-pin plug connection,
Sub-D (37-pin)
Fieldbus connection/control block
5/2-way valve, double
solenoid
3
Valve types
5/2-way valve, single solenoid
with spring return
Product Range Overview
Electrical connection
5/2-way valve, single solenoid
with pneumatic spring return
Valves and Valve Manifolds
Detailed product information è www.festo.com/catalog/vtsa
M
O
J
D
N
K
H
B
G
E
P
Q
R
L
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
Fieldbus manifold/control block
Max. 32 valve positions/
max. 32 solenoid coils
Any compressed-air supply
Any number of pressure zones
Comprehensive
Width 0.71 in (ISO Size 02):
valve flow rate up to 24.7 scfm
Width 1.02 in (ISO Size 01):
valve flow rate up to 49.4 scfm
Width 1.65 in (ISO Size 1):
valve flow rate up to 53 scfm
Width 2.05 in (ISO Size 2):
valve flow rate up to 102 scfm
Combinable
Width 0.71 in (Size 02), 1.02 in
(Size 01), 1.65 in (Size 1) and 2.05 in
(Size 2) can be combined on a single
valve manifold
Contents
–
–
–
–
134
è Internet: www.festo.com/catalog/...
Options Overview
Technical Data
Ordering Data
Accessories Overview
è 135
è 137
è 140
è 148
FAST Program Catalog – Subject to change – 2014/06
Valve Manifolds Type 44 VTSA, Type 45 VTSA-F – Inch Series
Overview
Flexible
Easy modification and expansion due
to high degree of modularity. Fast
connection of the subbases by means
of four screws.
Fully modular system allows the
combination of 0.71 in (Size 02), 1.02
in (Size 01), 1.65 in (Size 1) and
2.05 in (Size 2) valves on the same
manifold without the need for any
transition/adapter plate.
Change direction of working ports
with easy-to-install angle plate.
Fieldbus valve manifold suitable for
CPX electrical peripherals.
Easily Integrated
Comprehensive
Installation and Maintenance
Fieldbus nodes: Interbus, DeviceNet,
Profibus DP, CANopen, CC-Link via
CPX terminal
Ethernet: Modbus/TCP, EtherNet/IP,
TCP/IP via CPX terminal
Full complement of CPX I/O modules
Expandable up to 32 solenoid coils
Integration of a wide range of function
modules possible
Supply plates permit a flexible air
supply and variable pressure zones
High-performance valves in a sturdy
metal housing
Complete range of vertical sandwich
components such as pressure
regulators, flow control valve,
individual pressure supply, shutoff
plate (hot swap).
Standard air qualities: 40 micron
filtration grade. Can be used with
lubricated or non-lubricated air, and
inert gases.
Manual override available, with
momentary, locking, or hidden
(non-accessible) options.
Ready-to-install unit, preassembled
and tested
Durable, low cost identification by
label holder on the valve or label
holder on the subbase.
Secure wall mounting or DIN rail
mounting
Fast troubleshooting thanks to LEDs
on the valves and diagnosis via
fieldbus.
Reliability of service thanks to valves
that can be replaced easily and
quickly.
Easy fault identification using
CPX-MMI handheld diagnostic unit.
Control signals from the controller to
the valve manifold are transmitted via
a pre-assembled multi-core cable or a
self-assembled multi-pin plug
connection (Cage Clamp), which
substantially reduces installation time.
The valve manifolds can be fitted with
max. 32 valves and max. 32 solenoid
coils.
Variants
Multi-pin plug connection with
manifold strip (Cage Clamp)
24 V DC or 110 V AC
Pre-assembled connecting cable
24 V DC
Sub-D plug connector for fitting
by users, 37-pin
An integrated fieldbus node manages
the communication connection to a
higher-order PLC. This enables a
space-saving pneumatic and electronic
solution.
Valve manifolds with fieldbus interfaces
can be configured with up to 16
manifold subbases. With 2 solenoid
coils per connection, up to 32 solenoid
coils can thus be actuated.
Fieldbus connection via the CPX system
Valves and Valve Manifolds
Electrical Connection Options
Multi-pin plug connection
Fieldbus Variants
Profibus-DP
ProfiNet
Interbus
DeviceNet connection
CANopen
CC-Link
Ethernet/IP
EtherCAT
Front End Controller Remote
Front End Controller
Remote I/O
Modbus/TCP
Profinet IO
CPX-Terminal
è www.festo.com/catalog/cpx
3
Control block connection via the CPX system
Controllers integrated in the Festo
valve manifolds permit the construction
of stand-alone control units to IP65,
without control cabinets.
2014/06 – Subject to change – FAST Program Catalog
Using the slave operation mode,
these valve manifolds can be used for
intelligent pre-processing and are
therefore ideal modules for designing
decentralized intelligence.
è Internet: www.festo.com/catalog/...
In the master operation mode, manifold
groups can be designed with many
options and functions, which can
autonomously control a medium-sized
machine/system.
CPX manifold
è www.festo.com/catalog/cpx
135
Valve Manifolds Type 44 VTSA, Type 45 VTSA-F – Inch Series
Overview
Modular Pneumatic Components
The modular design of the VTSA/VTSA-F
facilitates maximum flexibility right
from the planning stage and offers
maximum ease of service in operation.
The system consists of manifold
subbases and valves.
The manifold subbases are screwed
together and thus form the support
system for the valves.
Valves and Valve Manifolds
Modularity in the basic system
3
Inside, the manifold subbases contain
the connection ducts for supplying
compressed air to and venting from the
valve manifold as well as the working
ports for the pneumatic cylinders from
each valve.
Each manifold subbase is connected to
the next using four screws.
Individual manifold sections can be
isolated and further blocks inserted by
loosening these screws. This ensures
that the valve manifold can be rapidly
and reliably expanded.
Modularity in the valves
Modular Electrical Peripherals
The manner in which the valves are
actuated differs according to whether
you are using a multi-pin manifold or
fieldbus manifold.
The VTSA/-VTSA-F with CPX interface is
based on the internal bus system of the
CPX and uses this communication
system for all solenoid coils and a range
of electrical input and output functions.
VTSA with electrical peripherals CPX
136
Parallel linking facilitates the following:
Transmission of switching
information
High valve density
Compact design
Position-based diagnosis
Separate voltage supply for valves
Flexible conversion without address
shifting
Transmission of status, parameter
and diagnostic data
Modularity with electrical peripherals CPX
è Internet: www.festo.com/catalog/...
FAST Program Catalog – Subject to change – 2014/06
Valve Manifolds Type 44 VTSA, Type 45 VTSA-F – Inch Series
Technical Data
Flow rate
Width 0.71 in: Up to 24.7 scfm
Width 1.02 in: Up to 49.4 scfm
Width 1.65 in: Up to 53 scfm
Width 2.05 in: Up to 102 scfm
Valve width
ISO Size 02: 0.71 in (18 mm)
ISO Size 01: 1.02 in (26 mm)
ISO Size 1: 1.65 in (42 mm)
ISO Size 2: 2.05 in (52 mm)
Voltage
24 V DC
110 V AC
0.71 in
Design
Lubrication
Type of mounting
Mounting position
Manual override
Pneumatic connections
Pneumatic connection
Supply port
Exhaust port
Working ports
Port for external pilot
supply air
Pilot exhaust air port
Certification
1
3/5
2/4
14
12
1.02 in
1.65 in (type 44 VTSA only)
Electromagnetically actuated piston spool valve
Lubrication for life
Wall mounting
On DIN H-rail to EN 60715
Any
Pushing, pushing/detenting, covered
NPT thread
Via manifold subbase
½ NPT, QS-½-½-U, QS-½-Æ-U
½ NPT, QS-½-½-U, QS-½-Æ-U
x NPT,
¼ NPT,
QS-x-¼-U,
QS-¼-Ä-U,
QS-x-Ä-U
QS-¼-y-U
¼ NPT
2.05 in (type 44 VTSA only)
Valves and Valve Manifolds
General Technical Data
Width
¾NPT, N-¾-P-19-NPT
¾NPT, N-¾-P-19-NPT
½ NPT,
QS-½-½-U
y NPT,
QS-y-y-U,
QS-y-½-U
3
¼ NPT
•
Operating and Environmental Conditions
Valve function order code
M
Operating medium
Note on operating/pilot medium
Grade of filtration
Operating pressure
Pilot pressure
With internal pilot air
With external pilot air
Ambient temperature
Temperature of medium
Storage temperature1)
Relative air humidity
Compressed air in accordance with ISO 8573-1:2010 [7:4:4]
Operation with lubricated medium possible (in which case lubricated operation will always be required)
40 (average pore size)
44 … 147
44 … 147
–13.2 … +147
44 … 147
–13.2 … +147
23 … 122
23 … 122
–4 … +104
90
1)
[μm]
[psi]
[psi]
[psi]
[°F]
[°F]
[°F]
[%]
O
J
D
N
K
H
B
G
E
P
Q
R
Long-term storage
2014/06 – Subject to change – FAST Program Catalog
è Internet: www.festo.com/catalog/...
137
Valve Manifolds Type 44 VTSA, Type 45 VTSA-F – Inch Series
Technical Data
Standard Nominal Flow Rate [scfm] – Type 44 VTSA
Valve function order code
Width 0.71 in
Flow rate of valve
Flow rate of valve on individual subbase
Flow rate of valve on valve manifold
Width 1.02 in
Flow rate of valve
Flow rate of valve on individual subbase
Flow rate of valve on valve manifold
Width 1.65 in
Flow rate of valve
Flow rate of valve on individual subbase
Flow rate of valve on valve manifold
Width 2.05 in
Flow rate of valve
Flow rate of valve on individual subbase
Flow rate of valve on valve manifold
Valves and Valve Manifolds
1)
2)
3
O
J
D
N
K
H
B
G
E
P
26.5
21.2
19.4
21.2
17.7
14.1
24.71), 15.22)
19.41), 12.72)
15.91), 10.62)
21.2
17.7
14.1
49.4
42.4
38.8
44.1
38.8
31.8
49.41), 35.32)
42.41), 30.02)
35.31), 24.72)
44.1
35.3
31.8
63.5
45.9
53.0
49.4
42.4
42.4
60.01), 26.52)
42.41), 28.22)
49.41), 28.22)
49.4
42.4
42.4
141.2
113
102.4
105.9
88.3
84.7
1271), 602)
105.91), 602)
98.81), 602)
105.9
88.3
84.7
Q
R
Q
R
Switching position
Mid-position
Standard Nominal Flow Rate [scfm] – Type 45 VTSA-F
Valve function order code
Width 0.71 in
Flow rate of valve
Flow rate of valve on valve manifold
Width 1.02 in
Flow rate of valve
Flow rate of valve on valve manifold
1)
2)
M
M
O
J
D
N
K
H
B
G
E
P
26.5
24.7
21.2
19.4
17.71), 11.62)
17.71), 11.62)
21.2
19.4
49.4
47.7
44.1
40.6
49.41), 24.72)
47.71), 24.72)
44.1
40.6
Switching position
Mid-position
Valve Response Times [ms]
Valve function order code
M
O
J
D
N
K
H
B
G
E
P
Q
R
on
off
changeover
22
28
–
12
38
–
–
–
11
–
–
11
12
30
–
12
30
–
12
30
–
15
44
22
15
44
22
15
44
22
25
12
–
25
12
–
25
12
–
on
off
changeover
Width 1.65 in (type 44 VTSA only)
Response times
on
off
changeover
Width 2.05 in (type 44 VTSA only)
Response times
on
off
changeover
25
45
–
20
65
–
–
–
18
–
–
18
20
38
–
20
38
–
20
38
–
22
65
33
22
65
33
22
65
33
32
30
–
32
30
–
32
30
–
27
45
–
22
60
–
–
–
16
–
–
16
20
38
–
20
38
–
20
38
–
22
65
–
22
65
–
22
65
–
34
28
–
34
28
–
34
28
–
40
45
–
20
60
–
–
–
18
–
–
18
20
35
–
20
35
–
20
35
–
30
100
–
30
100
–
30
100
–
50
65
–
50
65
–
50
65
–
Width 0.71 in
Response times
Width 1.02 in
Response times
138
è Internet: www.festo.com/catalog/...
FAST Program Catalog – Subject to change – 2014/06
Valve Manifolds Type 44 VTSA, Type 45 VTSA-F – Inch Series
Technical Data
Electrical Data – VTSA/VTSA-F with CPX Manifold
0.71 in
1.02 in
1.65 in (Type 44 VTSA only)
Voltage supply for electronics/sensors (pin 1)
Operating voltage
[V] 24 DC ±10%
Steady state current
[mA] 20
consumption at 24 V DC
Duty cycle
100%
Load voltage supply for valves (pin 2)
Operating voltage
[V] 24 DC ±10%
Diagnostic message
[V] 21.6 … 21.5
undervoltage VOFF, load
voltage outside function range
Protection class to EN 60529
IP65 (for all types of signal transmission in assembled state)
Power consumption at 24 V DC
2x 3/2-way valve
[W] 1.3
5/2-way valve, 5/3-way valve
[W] 1.6
Electrical Data – VTSA/VTSA-F with Multi-pin Plug Connection
0.71 in
4.6
4.6
1.65 in (Type 44 VTSA only)
2.05 in (Type 44 VTSA only)
[V] 24 DC ±10%
110 AC ±10% (50 … 60 Hz)
100%
IP65 (for all types of signal transmission in assembled state), NEMA 4
Duty cycle
Protection class to EN 60529
Power consumption at 24 V DC
2x 3/2-way valve
[W] 1.3
5/2-way valve, 5/3-way valve
[W] 1.6
Power consumption at 110 V AC
2x 3/2-way valve
[VA] 1
5/2-way valve, 5/3-way valve
[VA] 1.6
Valves and Valve Manifolds
Load voltage supply for valves
Operating voltage
1.02 in
2.5 in (Type 44 VTSA only)
4.6
4.6
3
Materials
0.71 in
Manifold subbase
Valve
Seals
Supply plate
Right-hand end plate
Left-hand pneumatic interface
Flow control plate
Pressure regulator plate
Multi-pin connection block
Cover for the pneumatic interface and
multi-pin plug connection
1.02 in
1.65 in (Type 44 VTSA only)
2.05 in (Type 44 VTSA only)
Die-cast aluminum
Die-cast aluminum, reinforced polyamide
Nitrile rubber, elastomer (support made of steel)
Die-cast aluminum
Die-cast aluminum
Die-cast aluminum
Die-cast aluminum
Die-cast aluminum, reinforced polyamide
Die-cast aluminum
Wellamid, reinforced polyamide
2014/06 – Subject to change – FAST Program Catalog
è Internet: www.festo.com/catalog/...
139
Valve Manifolds Type 44 VTSA, Type 45 VTSA-F – Inch Series
Ordering Data
Valves and Valve Manifolds
Valve Manifold Configurator
3
A valve manifold configurator is
available to help you select a suitable
VTSA/VTSA-F valve manifold. This makes
it much easier for you to find the right
product.
The valve manifolds are fully assembled
according to your order specifications
and are individually tested. This reduces
the amount of assembly and installation
to a minimum.
You order a valve terminal type 44/45
using the order code.
Ordering system for type 44/45
è Internet: type 44, type 45
Ordering system, CPX
è Internet: cpx
The illustration above provides an
example of a valve terminal
configuration.
The following steps explain how you
arrive at the order code:
Once you have called up
www.festo.com/us, click on “Products”
tab and then select the “Catalog” tab on
the left hand side of the “Products”
page.
Now select “Valve Manifolds” and then
“Industry Standard Valve Manifolds”.
Select your desired valve terminal (in
this case VTSA) and then finally click on
link of the product with the desired
actuation methodology.
You can then configure the valve
terminal step by step (from left to right)
according to your requirements. Now
click on the “Add to basket” option to
save the selected configuration (this will
not trigger an order).
2D/3D CAD Data
You can request the CAD data for a
valve terminal you have configured by
selecting the “2D/3D view” option
under the “Add to basket option” in the
valve terminal configurator. You can
generate a 3D preview or request an
email or download of a CAD model in
the format of your choice.
Lead Time LT for all configurable options on this page: 3D typically ships within 3 days
140
è Internet: www.festo.com/catalog/...
FAST Program Catalog – Subject to change – 2014/06
Valve Manifolds Type 44 VTSA, Type 45 VTSA-F – Metric Series
Overview
Modular multi-functional valve manifold for up to 32 valves:
– Type 44 VTSA, ISO 15407-2/ISO 5599-2
– Type 45 VTSA-F with optimized flow
Different valve sizes on one valve manifold:
– 18 mm (ISO 02)
– 26 mm (ISO 01)
– 42 mm (IS0 1), type 44 VTSA only
– 52 mm (IS0 2), type 44 VTSA only
Flow rate: up to 2,900 l/min
Pneumatic connections with threaded connector or QS fitting
Design suitable for electrical peripherals CPX
Key features
Multi-pin plug manifold
Max. 32 valve positions/
max. 32 solenoid coils
Parallel modular valve linking via
circuit boards
Any compressed-air supply
Any number of pressure zones
5/2-way valve, single solenoid
with spring return
5/2-way valve, double
solenoid
5/2-way valve, double solenoid
dominant switching
2x 3/2-way valve,
normally open
2x 3/2-way valve,
normally closed
2x 3/2-way valve: 1x normally
open, 1x normally closed
5/3-way valve,
mid-position pressurized
5/3-way valve,
mid-position closed
5/3-way valve,
mid-position exhausted
2x 3/2-way valve, normally
open, reverse operation
2x 3/2-way valve, normally
closed, reverse operation
2x 3/2-way valve:
1x normally open, 1x normally
closed, reverse operation
Blanking plate for vacant
position
Electrical multi-pin plug connection,
CageClamp
Electrical multi-pin plug connection,
Sub-D (37-pin)
Fieldbus connection/control block
Valve types
5/2-way valve, single solenoid
with pneumatic spring return
Product Range Overview
Electrical connection
M
O
J
D
N
K
H
B
G
E
P
Q
R
L
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
n
Fieldbus manifold/control block
Max. 32 valve positions/
max. 32 solenoid coils
Any compressed-air supply
Any number of pressure zones
Comprehensive
18 mm (ISO Size 02): Valve flow rate
up to 550 l/min
26 mm (ISO Size 01): Valve flow rate
up to 1,100 l/min
42 mm (ISO Size 1):
valve flow rate up to 1,500 l/min
52 mm (ISO Size 2):
valve flow rate up to 2,900 l/min
3
Combinable
Width 18 mm (Size 02), 26 mm
(Size 01), 42 mm (Size 1) and 52 mm
(Size 2) can be combined on a single
valve manifold
Contents
Note: All metric products can be used within inch tubing systems via hybrid fittings (è Overview on page 240)
2014/06 – Subject to change – FAST Program Catalog
è Internet: www.festo.com/catalog/...
–
–
–
–
Options Overview
Technical Data
Ordering Data
Accessories Overview
Valves and Valve Manifolds
Detailed product information è www.festo.com/catalog/vtsa
è 142
è 144
è 147
è 148
141
Valve Manifolds Type 44 VTSA, Type 45 VTSA-F – Metric Series
Overview
Flexible
Easy modification and expansion due
to high degree of modularity. Fast
connection of the subbases by means
of four screws.
Fully modular system allows the
combination of 18 mm (Size 02),
26 mm (Size 01), 42 mm (Size 1) and
52 mm (Size 2) valves on the same
manifold without the need for any
transition/adapter plate.
Change direction of working ports
with easy-to-install angle plate.
Fieldbus valve manifold suitable for
CPX electrical peripherals.
Easily integrated
Comprehensive
Installation and maintenance
Fieldbus nodes: Interbus, DeviceNet,
Profibus DP, CANopen, CC-Link via
CPX terminal
Ethernet: Modbus/TCP, EtherNet/IP,
TCP/IP via CPX terminal
Full complement of CPX I/O modules
Expandable up to 32 solenoid coils
Integration of a wide range of function
modules possible
Supply plates permit a flexible air
supply and variable pressure zones
High-performance valves in a sturdy
metal housing
Complete range of vertical sandwich
components such as pressure
regulators, flow control valve,
individual pressure supply, shutoff
plate (hot swap).
Standard air qualities: 40 micron
filtration grade. Can be used with
lubricated or non-lubricated air, and
inert gases.
Manual override available, with
momentary, locking, or hidden
(non-accessible) options.
Ready-to-install unit, preassembled
and tested
Durable, low cost identification by
label holder on the valve or label
holder on the subbase.
Secure wall mounting or DIN rail
mounting
Fast troubleshooting thanks to LEDs
on the valves and diagnosis via
fieldbus.
Reliability of service thanks to valves
that can be replaced easily and
quickly.
Easy fault identification using
CPX-MMI handheld diagnostic unit.
Control signals from the controller to
the valve manifold are transmitted via
a pre-assembled multi-core cable or a
self-assembled multi-pin plug
connection (Cage Clamp), which
substantially reduces installation time.
The valve manifolds can be fitted with
max. 32 valves and max. 32 solenoid
coils.
Variants
Multi-pin plug connection with
manifold strip (Cage Clamp)
24 V DC or 110 V AC
Pre-assembled connecting cable
24 V DC
Sub-D plug connector for fitting
by users, 37-pin
An integrated fieldbus node manages
the communication connection to a
higher-order PLC. This enables a
space-saving pneumatic and electronic
solution.
Valve manifolds with fieldbus interfaces
can be configured with up to 16
manifold subbases. With 2 solenoid
coils per connection, up to 32 solenoid
coils can thus be actuated.
Valves and Valve Manifolds
Electrical connection options
Multi-pin plug connection
Fieldbus connection via the CPX system
3
Fieldbus Variants
Profibus-DP
ProfiNet
Interbus
DeviceNet connection
CANopen
CC-Link
Ethernet/IP
EtherCAT
Front End Controller Remote
Front End Controller
Remote I/O
Modbus/TCP
Profinet IO
CPX-Terminal
è www.festo.com/catalog/cpx
Control block connection via the CPX system
Controllers integrated in the Festo
valve manifolds permit the construction
of stand-alone control units to IP65,
without control cabinets.
142
è Internet: www.festo.com/catalog/...
Using the slave operation mode,
these valve manifolds can be used for
intelligent pre-processing and are
therefore ideal modules for designing
decentralized intelligence.
In the master operation mode, manifold
groups can be designed with many
options and functions, which can
autonomously control a medium-sized
machine/system.
CPX manifold
è www.festo.com/catalog/cpx
FAST Program Catalog – Subject to change – 2014/06
Valve Manifolds Type 44 VTSA, Type 45 VTSA-F – Metric Series
Overview
Modular Pneumatic Components
The system consists of manifold
subbases and valves.
The manifold subbases are screwed
together and thus form the support
system for the valves.
Modularity in the basic system
Inside, the manifold subbases contain
the connection ducts for supplying
compressed air to and venting from the
valve manifold as well as the working
ports for the pneumatic cylinders from
each valve.
Each manifold subbase is connected to
the next using four screws.
Individual manifold sections can be
isolated and further blocks inserted by
loosening these screws. This ensures
that the valve manifold can be rapidly
and reliably expanded.
Modularity in the valves
Modular Electrical Peripherals
The manner in which the valves are
actuated differs according to whether
you are using a multi-pin manifold or
fieldbus manifold.
The VTSA/VTSA-F with CPX interface is
based on the internal bus system of the
CPX and uses this communication
system for all solenoid coils and a range
of electrical input and output functions.
VTSA with electrical peripherals CPX
2014/06 – Subject to change – FAST Program Catalog
Parallel linking facilitates the following:
Transmission of switching
information
High valve density
Compact design
Position-based diagnosis
Separate voltage supply for valves
Flexible conversion without address
shifting
Transmission of status, parameter
and diagnostic data
Modularity with electrical peripherals CPX
è Internet: www.festo.com/catalog/...
143
Valves and Valve Manifolds
The modular design of the VTSA/VTSA-F
facilitates maximum flexibility right
from the planning stage and offers
maximum ease of service in operation.
3
Valve Manifolds Type 44 VTSA, Type 45 VTSA-F – Metric Series
Technical Data
Flow rate
Width 18 mm: Up to 700 l/min
Width 26 mm: Up to 1,400 l/min
Width 42 mm: Up to 1,500 l/min
Width 52 mm: Up to 2,900 l/min
Valve width
ISO Size 02: 18 mm
ISO Size 01: 26 mm
ISO Size 1: 42 mm
ISO Size 2: 52 mm
Voltage
24 V DC
110 V AC
General Technical Data
Width
18 mm
Valves and Valve Manifolds
Design
Lubrication
Type of mounting
3
Mounting position
Manual override
Pneumatic connections
Pneumatic connection
Supply port
Exhaust port
Working ports
Port for external pilot supply air
Pilot exhaust air port
Certification
1
3/5
2/4
14
12
26 mm
Electromagnetically actuated piston spool valve
Lubrication for life
Wall mounting
On DIN H-rail to EN 60715
Any
Pushing, pushing/detenting, covered
Metric threaded connection
Via manifold subbase
G½, QS-G½-12, QS-G½-16
G½, QS-G½-12, QS-G½-16
Gx, QS-Gx-6, QS-Gx-8
G¼, QS-G¼-8, QS-G¼-10
G¼
G¼
G¼
G¼
—
42 mm (type 44 VTSA only)
52 mm (type 44 VTSA only)
Gy, QS-Gy-12, QS-Gy-10
G¼
G¼
G¾, N-¾-P-19
G¾, N-¾-P-19
G½ , QS-½-12, QS-½-16
G¼
G¼
K
E
Note: This product conforms to ISO 1179-1 and ISO 228-1
Operating and Environmental Conditions
Valve function order code
M
Operating medium
Note on operating/pilot medium
Grade of filtration
Operating pressure
Pilot pressure
With internal pilot air
With external pilot air
Ambient temperature
Temperature of medium
Storage temperature1)
Relative air humidity
Compressed air in accordance with ISO 8573-1:2010 [7:4:4]
Operation with lubricated medium possible (in which case lubricated operation will always be required)
40 (average pore size)
3 … 10
3 … 10
–0.9 … +10
3 … 10
–0.9 … +10
–5 … +50
–5 … +50
–20 … +40
90
1)
[μm]
[bar]
[bar]
[bar]
[°C]
[°C]
[°C]
[%]
O
J
D
N
H
B
G
P
Q
R
Long-term storage
144
è Internet: www.festo.com/catalog/...
FAST Program Catalog – Subject to change – 2014/06
Valve Manifolds Type 44 VTSA, Type 45 VTSA-F – Metric Series
Technical Data
Standard Nominal Flow Rate [l/min] – Type 44 VTSA
Valve function order code
Width 18 mm
Flow rate of valve
Flow rate of valve on individual subbase
Flow rate of valve on valve manifold
Width 26 mm
Flow rate of valve
Flow rate of valve on individual subbase
Flow rate of valve on valve manifold
Width 42 mm
Flow rate of valve
Flow rate of valve on individual subbase
Flow rate of valve on valve manifold
Width 52 mm
Flow rate of valve
Flow rate of valve on individual subbase
Flow rate of valve on valve manifold
J
D
N
K
H
B
G
E
P
750
600
550
600
500
400
7001), 4302)
5501), 3602)
4501), 3002)
600
500
400
1 400
1 200
1 100
1 250
1 100
900
1 400 1), 1 0002)
1 2001), 8502)
1 0001), 7002)
1 250
1 000
900
1 800
1 300
1 500
1 400
1 200
1 200
1 7001), 7502)
1 2001), 8002)
1 400 1), 8002)
1 400
1 200
1 200
4 000
3 200
2 900
3 000
2 500
2 400
3 6001), 1 7002)
1 2001), 8002)
2 8001), 1 7002)
3 000
2 500
2 400
Q
R
Q
R
Switching position
Mid-position
Standard Nominal Flow Rate [l/min] – Type 45 VTSA-F
Valve function order code
Width 18 mm
Flow rate of valve
Flow rate of valve on valve manifold
Width 26 mm
Flow rate of valve
Flow rate of valve on valve manifold
1)
2)
O
M
O
J
D
N
K
H
B
G
E
P
750
700
600
550
5001), 3302)
5001), 3302)
600
550
1 400
1 350
1 250
1 150
1 400 1), 7002)
1 350 1), 7002)
1 250
1 150
Valves and Valve Manifolds
1)
2)
M
3
Switching position
Mid-position
Valve Response Times [ms]
Valve function order code
18 mm
Response times
26 mm
Response times
M
O
J
D
N
K
H
B
G
E
P
Q
R
on
off
changeover
22
28
–
12
38
–
–
–
11
–
–
11
12
30
–
12
30
–
12
30
–
15
44
22
15
44
22
15
44
22
25
12
–
25
12
–
25
12
–
on
off
changeover
25
45
–
20
65
–
–
–
18
–
–
18
20
38
–
20
38
–
20
38
–
22
65
33
22
65
33
22
65
33
32
30
–
32
30
–
32
30
–
27
45
–
22
60
–
–
–
16
–
–
16
20
38
–
20
38
–
20
38
–
22
65
–
22
65
–
22
65
–
34
28
–
34
28
–
34
28
–
70
90
–
25
110
–
–
–
18
–
–
18
35
70
–
35
70
–
35
70
–
30
100
–
30
100
–
30
100
–
50
65
–
50
65
–
50
65
–
42 mm (type 44 VTSA only)
Response times
on
off
changeover
52 mm (type 44 VTSA only)
Response times
on
off
changeover
2014/06 – Subject to change – FAST Program Catalog
è Internet: www.festo.com/catalog/...
145
Valve Manifolds Type 44 VTSA, Type 45 VTSA-F – Metric Series
Technical Data
Electrical Data – VTSA/VTSA-F with CPX Manifold
18 mm
Voltage supply for electronics/sensors (pin 1)
Operating voltage
[V]
Steady state current consumption at
[mA]
24 V DC
Duty cycle
Load voltage supply for valves (pin 2)
Operating voltage
[V]
Diagnostic message undervoltage VOFF,
[V]
load voltage outside function range
Protection class to EN 60529
Power consumption at 24 V DC
2x 3/2-way valve
[W]
5/2-way valve, 5/3-way valve
[W]
Valves and Valve Manifolds
3
Duty cycle
Protection class to EN 60529
Power consumption at 24 V DC
2x 3/2-way valve
5/2-way valve, 5/3-way valve
Power consumption at 110 V AC
2x 3/2-way valve
5/2-way valve, 5/3-way valve
42 mm (Type 44 VTSA only)
52 mm (Type 44 VTSA only)
24 DC ±10%
20
100%
24 DC ±10%
21.6 … 21.5
IP65 (for all types of signal transmission in assembled state)
1.3
1.6
Electrical Data – VTSA/VTSA-F with Multi-pin Plug Connection
18 mm
Load voltage supply for valves
Operating voltage
26 mm
4.6
4.6
26 mm
42 mm (Type 44 VTSA only)
52 mm (Type 44 VTSA only)
[V] 24 DC ±10%
110 AC ±10% (50 … 60 Hz)
100%
IP65 (for all types of signal transmission in assembled state), NEMA 4
[W] 1.3
[W] 1.6
4.6
4.6
[VA] 1
[VA] 1.6
Materials
18 mm
Manifold subbase
Valve
Seals
Supply plate
Right-hand end plate
Left-hand pneumatic interface
Flow control plate
Pressure regulator plate
Multi-pin connection block
Cover for the pneumatic interface and
multi-pin plug connection
146
26 mm
42 mm (Type 44 VTSA only)
52 mm (Type 44 VTSA only)
Die-cast aluminum
Die-cast aluminum, reinforced polyamide
Nitrile rubber, elastomer (support made of steel)
Die-cast aluminum
Die-cast aluminum
Die-cast aluminum
Die-cast aluminum
Die-cast aluminum, reinforced polyamide
Die-cast aluminum
Wellamid, reinforced polyamide
è Internet: www.festo.com/catalog/...
FAST Program Catalog – Subject to change – 2014/06
Valve Manifolds Type 44 VTSA, Type 45 VTSA-F – Metric Series
Ordering Data
A valve manifold configurator is
available to help you select a suitable
VTSA/VTSA-F valve manifold. This makes
it much easier for you to find the right
product.
The valve manifolds are fully assembled
according to your order specifications
and are individually tested. This reduces
the amount of assembly and installation
to a minimum.
You order a valve terminal type 44/45
using the order code.
Ordering system for type 44/45
è Internet: type 44, type 45
Ordering system, CPX
è Internet: cpx
The illustration above provides an
example of a valve terminal
configuration.
The following steps explain how you
arrive at the order code:
Once you have called up
www.festo.com/us, click on “Products”
tab and then select the “Catalog” tab on
the left hand side of the “Products”
page.
Now select “Valve Manifolds” and then
“Industry Standard Valve Manifolds”.
Select your desired valve terminal (in
this case VTSA) and then finally click on
link of the product with the desired
actuation methodology.
You can then configure the valve
terminal step by step (from left to right)
according to your requirements. Now
click on the “Add to basket” option to
save the selected configuration (this will
not trigger an order).
2D/3D CAD Data
You can request the CAD data for a
valve terminal you have configured by
selecting the “2D/3D view” option
under the “Add to basket option” in the
valve terminal configurator. You can
generate a 3D preview or request an
email or download of a CAD model in
the format of your choice.
Lead Time LT for all configurable options on this page: 3D typically ships within 3 days
2014/06 – Subject to change – FAST Program Catalog
è Internet: www.festo.com/catalog/...
147
Valves and Valve Manifolds
Valve manifold configurator
3
Valve Manifolds Type 44 VTSA, Type 45 VTSA-F
Accessories
System Overview – Valve Manifold with Multi-pin Plug Connection
Order code:
44E for the electrical components
44P for the pneumatic components
45P… for the pneumatic components.
High flow rate with optimized
manifold subbases.
Double solenoid valve positions can
be equipped with any valve or a
blanking plate.
Single solenoid valve positions can
only be equipped with single solenoid
valves or a blanking plate.
Valve manifolds with multi-pin plug
connection can be expanded with up to
32 valves with max. 32 solenoid coils.
The manifold subbases width 18 and
26 mm are prepared for:
2 single solenoid valves
2 double solenoid valves
The manifold subbases width 42 mm
are prepared for:
1 single solenoid valve
1 double solenoid valve
depending on the size.
aB
aC
aD
The following multi-pin plug
connections to IP65 are available:
37-pin Sub-D connection (24 V DC):
The connecting cable can be ordered
in lengths of 2.5 m, 5 m and 10 m for
max. 8, 22 or 32 solenoid coils.
Manifold strip
(24 V DC or 110 V AC)
aE
bJ
bA
bB
aI
aH
aC
6
Valves and Valve Manifolds
5
3
aG
aE
aF
4
2
1
aJ
9
bC
aA
bA
7
3
7
8
bE
bB
bD
bF
bB
bB
cB
148
cA
bF
bI
bB
bH
bB
bG
bF
cJ
è Internet: www.festo.com/catalog/...
FAST Program Catalog – Subject to change – 2014/06
Valve Manifolds Type 44 VTSA, Type 45 VTSA-F
Accessories
System Overview – Valve Manifold with Multi-pin Plug Connection
Brief description
Inscription labels
Multi-core cable
Exhaust plate
Fittings
Silencer
Exhaust port cover
7
8
9
aJ
aA
aB
aC
aD
aE
aF
aG
Duct separation/seal
Manifold subbase
Flow control plate
Vertical supply plate
Vertical shut-off plate
Pressure regulator plate
Cover cap
Valve
Inscription label holder
Blanking plate
Valve
Large, for multi-pin plug connection
–
Ports 3 and 5 separated
For supply plate
For supply plate
For ducted exhaust air (ports 3 and 5
combined)
–
For valves with a width of 26 mm
–
–
–
–
For manual override, pushing, covered
Width 26 mm
For valve
For unused valve position (vacant position)
Width 18 mm
Brief description
aH
aI
bJ
bA
bB
bC
bD
Valve
Right-hand end plate
Silencer
Blanking plugs
Fittings
End plate with pilot air selector
Manifold subbase
bE
bF
Manifold subbase
Inscription label holder
bG
bH
bI
cJ
cA
90° connection plate
Seals
Silencer
Supply plate
Multi-pin plug connection
cB
Multi-pin plug connection
Width 42 mm (type 44 only)
–
For end plate
–
–
–
For valves with a width of 42 mm (type 44
only)
For valves with a width of 18 mm
For supply plate, subbase, 90°
connection plate
–
–
–
–
Via manifold strip (CageClamp) 24 V DC or
110 V AC
With multi-core cable 24 V DC
Valves and Valve Manifolds
1
2
3
4
5
6
3
2014/06 – Subject to change – FAST Program Catalog
è Internet: www.festo.com/catalog/...
149
Valve Manifolds Type 44 VTSA, Type 45 VTSA-F
System Overview
System Overview – Valve Manifold with Fieldbus Connection, Control Block (Electrical Peripherals CPX)
Order code:
50E-… for the electrical peripherals
44P for the pneumatic components
45P… for the pneumatic components.
High flow rate with optimized
manifold subbases.
Valve manifolds with fieldbus interface
can be expanded with up to 32 valves
with max. 32 solenoid coils.
Each valve position can be fitted with
any valve or a blanking plate.
aB
aA
The rules for CPX apply to the
equipment that can be used in
combination with the electrical
peripherals CPX.
In general:
Max. 10 electrical modules
Digital inputs/outputs
Analog inputs/outputs
Parameterisation of inputs and
outputs
Integrated feature-rich diagnostic
system
Preventive maintenance concepts
aD
aC
aI
bJ
bA
aH
aG
aB
5
4
Valves and Valve Manifolds
2
aF
aD
aE
3
1
9
8
bB
aJ
bJ
6
6
3
7
bD
bA
bC
bE
bA
cA
150
cJ
6
bI
bA
bF
bH
bA
bG
bA
è Internet: www.festo.com/catalog/...
bF
bE
FAST Program Catalog – Subject to change – 2014/06
Valve Manifolds Type 44 VTSA, Type 45 VTSA-F
System Overview
System Overview – Valve Manifold with Fieldbus Connection, Control Block (Electrical Peripherals CPX)
Brief description
Inscription labels
Exhaust plate
Fittings
Silencer
Exhaust port cover
6
7
8
9
aJ
aA
aB
aC
aD
aE
aF
Duct separation/seal
Manifold subbase
Flow control plate
Vertical supply plate
Vertical shut-off plate
Pressure regulator plate
Cover cap
Valve
Inscription label holder
Blanking plate
Valve
Large, for pneumatic interface CPX
Ports 3 and 5 separated
For supply plate
For supply plate
For ducted exhaust air (ports 3 and 5
combined)
–
For valves with a width of 26 mm
–
–
–
–
For manual override, pushing, covered
Width 26 mm
For valve
For unused valve position (vacant position)
Width 18 mm
aG
aH
aI
bJ
bA
bB
bC
Valve
Right-hand end plate
Silencer
Blanking plugs
Fittings
End plate with pilot air selector
Manifold subbase
bD
bE
Manifold subbase
Inscription label holder
bF
bG
bH
bI
cJ
cA
90° connection plate
Seals
Silencer
Supply plate
Pneumatic interface
Fieldbus interface
Brief description
Width 42 mm (type 44 only)
–
For end plate
–
–
–
For valves with a width of 42 mm (type 44
only)
For valves with a width of 18 mm
For supply plate/subbase/90° connection
plate
–
–
–
–
–
–
Valves and Valve Manifolds
1
2
3
4
5
3
2014/06 – Subject to change – FAST Program Catalog
è Internet: www.festo.com/catalog/...
151