HDR110#SS
Sensor Activated Clean Dry™ High Speed
Concealed Hand Dryer
FEATURES
• AC powered hand dryer, equipped with very fast
and quiet motor providing 224 mph air speed with
only 62 dB noise rating
• Takes only 12 seconds to dry hands
• Touch free infra red sensor activation with power
saving function which turns the motor off
automatically when hands are removed or after 60
seconds of use
• Drip tray to prevent water from trickling to the floor
• Hard wired
• Mounts flush with the wall for clean design
• Flush mounting deters vandalism
• Quality, attractive construction with stainless
steel body
COLORS/FINISHES
• #SS Stainless Steel
CODES/STANDARDS
•
•
•
•
Meets or exceeds UL507, CSA C22.2 #113-M1984
Certifications: Intertek/ETL
Code Compliance: NEC, CEC
ADA compliant
PRODUCT SPECIFICATION
TOTO® Model No. _____________________________
Automatic infrared sensor activated, high speed hand
dryer. 120 V AC power hardwiring required. Decibel
rating of 58dB for low noise level while providing 224
mph air speedfor fast drying. Low power consumption
of 510 Watts. Drain Tray to collect water from hands.
HDR110#SS
Sensor Activated Clean Dry™ High Speed Concealed Hand Dryer
SPECIFICATIONS
•
•
•
•
•
•
•
•
•
•
•
•
INSTALLATION NOTES
Warranty
Material
Power Connection
Power Rating
One Year Warranty
For handicapped installation, refer to codes. Maximum
Stainless Steel
height of an blower outlet from finished floor is
Hardwired
47-1/4" (1200mm) to comply with ADA Guidelines
120V AC, 4.25 Amps, 60 Hz, ANSI A117.1 and CSA B651 requirements.
510 W
Power Saving Function Automatically turns OFF when
hands are removed or after 60
seconds of use
Decibel Rating
58dB
Air Speed
224 mph (100 meters/
second); 19,950 LFM
(linear feet per minute)
Dry Time
12 seconds*
Drain Tray Capacity
0.27 gal (950 ml)
Size
12-5/8” x 28-3/4” x 6-7/16”
Weight
22 lbs (10 kg)
Operating Temperature 32°-104°F (0°-40°C)
*Per tests performed at TOTO Lab.
These dimensions and specifications are subject to change without notice.
ROUGH-IN
Sensor
*1-9/16″ (40mm)
FROM FINISHED WALL
TO BRACKET HOLES
P6
W
P1-1
W
Control
Assembly
Power
Connector
P7
W
P1-2
B
P2
B=BLACK
W=WHITE
G=GREEN
15A
11-1/2″
(292mm)
5-1/8″
(130mm)
FINISHED
WALL
POWER CABEL
(HARDWIRING)
*1-9/16″ (40mm)
FROM FINISHED WALL
TO BRACKET HOLES
2”X4”
STUD
COMPARTMENT SIZE
11-3/8” x 5-3/8” x 11-1/2”
11-13/16″ (300mm)
(289mm x 137mm x 292mm)
OPEN WALL
3-1/8″ (80mm)
FROM STUD TO
BRACKET HOLE
5-1/8″(130mm)
Motor
P3
Power Fuse
B
3-9/16″ (90mm)
FROM STUD TO
BRACKET HOLE
2”X4”
STUD
Motor
W
26-5/16″
(668mm)
WIRING DIAGRAM
6-7/16″
(164mm)
1-9/16″ (40mm)
G
28-3/4″
(730mm)
12-5/8″
(320mm)
1-5/16″
(34mm)
FINISHED
WALL
-Male/Female: 30” (762 mm)
-Children: 24” (610 mm)
-Handicapped: 22” (559 mm)
#
2″
(50mm)
DRAIN TRAY
Recommended mounting
bracket heights from floor are
#
9-15/16″
(252mm)
26-5/16″ (668mm)
27-9/16″ - 27-5/8″ (700±2 mm)
OPEN WALL
TOP COVER
FINISHED FLOOR
*WALL THICKNESS REQUIREMENT: MIN 3/16 in (5mm) TO MAX. 1-3/16 (30mm)
These dimensions and specifications are subject to change without notice
Ph: (888) 295-8134 | Fax: (800) 699-4889 | www.totousa.com
# SS-00427, v.02
Printed in U.S.A. | © TOTO USA 10/09 | Printed on recycled paper ♻