Innovative Technology
Individual Solutions
Intensive Support
Hella Product Overview:
Agricultural, construction,
utility machines and fork lifts
Our Ideas,
Your Success
Innovative depth. Modular concepts.
Customer-specific solutions. Technological leadership.
Hella has earned itself a leading global position
through diligence, creativity and top-quality precision.
For over one hundred years. Hella and agricultural and
construction machinery manufacturers – a long-running successful partnership.
■ More safety through innovations in lighting technology: e.g. Xenon or halogen.
■ More economy thanks to integrated electrics and
electronics components.
■ More equipment versions, more brand-typical
features and more trendsetting: e.g. through an
extraordinary depth of product range and modular
systems.
■ More safety in production and in use: e.g. through
OEM quality, through synergies from our developments for the international automotive industry and
zero-fault quality management.
Design and styling
Lighting plays a central role in characterising a vehicle’s
appearance. For this reason, styling is particularly important
during the development process. Hella meets these challenges with different technologies that guarantee maximum
design freedom for the manufacturer. In addition, industrial
design specialists are working throughout the company
group to provide customers with optimum support in all
processes. A customer-specific Corporate Identity can be
built up and consolidated using innovative Hella technologies.
Styling as one of Hella’s main areas of expertise makes a
contribution to sharpening the OE brand image.
2
Contents
Introduction
2 – 3
4 – 5
6
7
8
9
10 – 11
Innovative, individual customizing
Multitude of possibilities through LEDs
Which Hella ballast for which vehicle?
Summary of the advantages of Hella LED products
Technical description of LED WORKLIGHTS
Light output and light colour
Modular systems
Worklights
12 – 15
16
17 – 19
20 – 21
22
Halogen worklights
Headlights for illuminating the boom on spraying vehicles
Xenon worklights
LED worklights
Accessories
Front Lighting
23 – 24
25 – 28
29
30 – 32
33 – 35
Daytime running light
90 mm headlights
50 mm headlights
Various low-beam headlights and spotlights
Auxiliary frontlighting
Rear lighting
36 – 48
49 – 50
51
52
Single and multi-functional lights
Safety stoplights, reflectors
Licence plate lights
Reversing spotlights
Beacons
53 – 55
Beacons
Warning lights
56
Warning lights
On site
Hella support.
We do not only see ourselves as top-quality suppliers, but rather as development partners. If
required, our developers and engineers can work
with your teams on site to prepare optimum solutions. This speeds up processes and prepares the
way for new standards. More technological freedom, more styling freedom, more room for rationalisation:
That is Hella.
Side lighting
57 – 58
Side marker lights
Interior lighting
59 – 67
Interior lighting
Elektrics / Elektronics
68
Rear view camera
69
Micro-switches
70 – 71
Relays
72
Flasher units
73
Time relays
74
Sensors / actuators
75 – 78
Horns, backup warning system, switches, sockets
3
More design freedom through LEDs.
Thanks to the use of LEDs, design engineers have a great deal more
design freedom. Ergonomic aspects can also be implemented easily
and effectively.
Wide range of technical possibilities through
LEDs.
Depending on the requirements of the product or customer wishes, Hella uses LEDs in different optical
systems. Here are some examples for combination rearlights:
Direct light
■ Spot-shaped appearance
■ No optical system necessary
■ Max. distance between
2 LEDs = 15 mm
Fresnel systems
■ Suitable for all functions
■ Homogeneous appearance
Reflector
with pattern/
Lens
without pattern
■ High degree of effectiveness
■ Brilliant finish
Light guide systems ■ Elongated appearance
■ Homogeneous illumination
■ Adaptation to curved exterior shape
4
Introduction
LED indicators
and the patented failure check.
Legal requirement in all ECE states
In the case of vehicles approved for use on public roads, the indicators must be monitored: The failure of an indicator must be shown optically or acoustically in the vehicle. This
applies in all ECE states. In other words, the potential failure of the indicator must be
monitored by the vehicle. Manufacturers use various failure check systems for this. The
failure checks currently in use cannot detect simple LED lights and indicate a fault. All
Hella LED indicators have integrated electronics for the failure check. The indicators are
self-monitoring. They generate an impulse that is evaluated by the electronic ballast. This
ballast simulates a 21 W bulb, which makes operation with conventional flasher units
possible.
As soon as one single LED fails, the light can be considered faulty, the impulse is not
generated. The ballast then switches the bulb simulation off and the flasher unit indicates
the fault to the driver.
LED light failure check and correct electrical connection
Operation of the light with AC voltage or synchronised direct current is not permitted!
LED light failure check
On account of the low Watt power of LED lights, which distinguishes
them significantly from filament bulb versions, there can be problems
with the bulb failure check during operation on various traction vehicles.
Since indicator failure checks are required by legislation, we recommend only operating the light in combination with an indicator control
unit, Hella part no. 5DS 009 552-… .
In addition, further lighting functions are detected by some traction
vehicles. This is a vehicle comfort function which is not required by
legislation and does not release drivers from their obligation to see for
themselves that the lighting equipment is working. Here, too, faulty diagnoses can be a result of the low power levels involved (instrument
panel in the driver cab indicates a light failure although the function is
working).
If faulty diagnoses such as the one described above occur during operation of your traction vehicle type, please contact the traction vehicle
manufacturer.
The individual light functions may only be operated with a vehicle fuse of max. 3 A.
5
Which Hella ballast goes best with your vehicle?
Vehicles which use
the cold check for
indicator failure
monitoring.
1.
Vehicles without
a flasher unit
which measure the
current to monitor
for failures.
2.
Description of failure
indication: Is a defective light
indicated when the ignition is
turned on or immediately when
the defect occurs or when the
bulb is removed but without
setting the indicator?
Solution:
Cold-check simulator
Description of failure indication:
Is the defect not noticed until
the indicator is on (e. g. flashing
frequency doubled)?
Cold-check simulator
24 V
Part no. 5DS 009 602-001
Cold-check simulator
12 V
Part no. 5DS 009 602-011
Indicator control unit for
towing vehicles 24 V and
trailers 24 V
separate power supply is
not required
IP 6K9K protection
Solution:
Indicator control unit
For EasyConn:
IP 6K9K protection
Does not allow dust to get in. Water sprayed
at the housing from high pressure / steam jet
cleaners will not have any damaging effects;
approx. water pressure: 80 to 100 bar.
Part no. 5DS 009 552-001
With rectangular cable
connectors:
Part no. 5DS 009 552-011
Vehicles with
flasher unit.
3.
Solution:
Replace the existing flasher unit
with an LED-driven one
2+1+1
LED flasher unit 12 V 2+1+1
Part no. 4DN 009 492-101
LED flasher unit 24 V 2+1
Part no. 4DM 009 492-001
2+1
LED flasher unit 24 V 3+1
3+1
Part no. 4DW 009 492-011
3+1
LED flasher unit 12 V 3+1
Part no. 4DW 009 492-111
6
Introduction
Summary of the advantages of the
Hella LED products
Profitability
Long service life
Reliability
Safety
Insensitive
Increased safety
towards
through quick
vibrations and impact
switch-on behaviour
High operational
Dust- and
safety
waterproof
Minimum power
consumption
Wear- and
maintenance-free
Design
Functional
design
Resistant to highpressure jet cleaners
(some model series)
Compact designs
7
Technical description of
LED WORKLIGHTS
Lighting engineering has undergone dramatic changes in the past few years as LEDs have increased in capacity. LEDs are
now also used for headlights and worklights, as well as for other kinds of lights. Hella was one of the first manufacturers to
launch the advantages of LED onto the market through mature technical solutions. Thanks to intensive research and development, Hella is already in a position to replace Xenon by LED worklights1). The long service life of the LEDs means that
Hella LED worklights are absolutely maintenance-free after installation. 2)
1) The lumen values listed for Hella LED worklights correspond to the light that effectively leaves the headlight. Thus these
specifications correspond to the measurement values.
2) Service life specifications for Hella LED worklights do not refer solely to the service life of the LED, but rather to the
system function.
Thermal Management
The long service life of the LED can only be achieved through good thermal management. Hella uses state-of-the-art simulation programs even at the development stage to help optimise the design in terms of heat dissipation. In addition, all
headlights are fitted with a thermal sensor that reduces power supply in the event of overheating. This is the only way all
the advantages of LED can be exploited throughout the service life.
8
Introduction
Light output and light colour
LED worklights already provide light output at Xenon level.
The colour temperature of around 6000 Kelvin is very similar to daylight. This makes perception much easier for the human eye
and prevents people becoming tired quickly. This makes more efficient working in the dark possible.
Light distribution halogen worklight
Light distribution xenon (HID) worklight
Light distribution LED worklight
9
Hauptscheinwerfer
Main Headlights
10
11
Introduction
Worklights
HALOGEN
Module 60
Flush-mounted worklight, matches the
headlight series
Close-range illumination, HB3 GL, 12V,
1GL 998 570-067
Close-range illumination, H9 GL, 12V,
1GL 998 570-071
Module 70
Modular series in versions for H3, H9, GE886,
HB3 bulbs.
H3
H9, GE886
Surface mount version
Close-range illumination, grommet, without H3 GL, 12/24V
1G0 996 176-001
Long-range illumination, grommet, without H3 GL, 12/24V
1G0 996 176-011
Close-range illumination, H9 GL, 12V,
1G0 996 176-041
Long-range illumination, H9 GL, 12V,
1G0 996 176-051
Close-range illumination, GE886 GL, 12V,
1G0 996 176-081
Close-range illumination, HB3, 12V,
1G0 996 176-401
HB3
H3
Flush mount version
Close-range illumination, grommet, without H3 GL, 12/24V
1G0 996 176-021
Long-range illumination, grommet, without H3 GL, 12/24V
1G0 996 176-031
Close-range illumination, H9 GL, 12V,
1G0 996 176-061
Long-range illumination, H9 GL, 12V,
1G0 996 176-071
Close-range illumination, GE886 GL, 12V,
1G0 996 176-091
Close-range illumination, HB3, 12V,
1G0 996 176-391
H9, GE886
*) See “Module 70” brochure for other versions
HB3
12
Worklights
HALOGEN
Mega Beam
Modular series for H3 bulb, suitable for 12 and 24 V, AMP,
Deutsch and grommet versions, GGVSE tested
Worklights
Surface mount version
Long-range illumination, without H3 GL, 12/24V, grommet
1GM 996 134-051
Off-road illumination, without H3 GL, 12/24V, grommet
1GM 996 134-061
Close-range illumination, without H3 GL, 12/24V,
AMP plug-type connection
1GM 996 134-171
Flush mount version
Close-range illumination, without H3 GL, 12/24V grommet
1GM 996 134-011
Surface mounting at the side with rotating joint,
Close-range illumination, without H3 GL, 12/24V, grommet
left
1GM 996 134-371
Oval 90
Modular series in versions for the HB3 bulb
Surface mount version
Close-range illumination, HB3 GL, 12V
1GB 996 186-051
Flush mount version
Close-range illumination, HB3 GL, 12V
1GB 996 186-061
13
Worklights
HALOGEN
Oval 100
Modular series in versions for 1 x H3, 2 x H3 and 1 x H9 bulbs.
Surface mount versions for upright mounting, H3 versions
also suitable for pendant mounting.
The front view matches the spotlights and low-beam headlights Oval 100 H7.
H3
H9
Surface mount version
Close-range illumination, without H3 GL, 12/24V, grommet
1GA 996 361-501
Close-range illumination, 2 x H3 GL, 12V, AMP plug-type
connection
1GA 996 161-291
Rotating joint at the side
Long-range illumination, 2xH3 GL, 12V,
AMP plug-type connection,
1GA 996 161-331
Flush mount version
Close-range illumination, without H3 GL, 12/24V, grommet
1GA 996 161-491
Off-road illumination,1xH9, 12V
1GA 996 161-371
Oval 100FL
Worklight for forklift trucks with twin reflector for illuminating
the close-range working area and high-bay shelf system
during stacking.
2xH3 GL, 12V, grommet, cable
1GN 996 361-461
2xH3 GL, 24V, grommet, cable
1GN 996 361-651
2xH3 GL, 48V, grommet, cable
auf Anfrage
14
Worklights
HALOGEN
Ultra Beam
115
Worklights
Surface mount version
Close-range illumination, without H3 GL, 12/24V,
AMP plug-type connection
1GA 007 506-001
Close-range illumination, without H3 GL, 12/24V,
AMP plug-type connection
1GA 007 506-011
103. 5
214
Close-range illumination, without H3 GL, 12/24V,
AMP plug-type connection, handle/switch
1GA 997 506-631
Off-road illumination, H9 GL, 12V, 2000 mm cable
1GA 996 150-021
With DT plug-type connection or grommet available
Rotating joint at the side
Close-range illumination, without H3 GL, 12/24V,
DT plug-type connection
1GA 996 083-011
Flush mount version
Close-range illumination, without H3 GL, 12/24V,
AMP plug-type connection
1GA 007 506-111
Close-range illumination, H9 GL, 12V,
AMP plug-type connection
1GA 996 150-051
15
Worklights
Worklights for illuminating the boom on spraying vehicles
The whole length of the boom is illuminated thanks to the homogeneous long-range illumination. The high-contrast light allows the
spraying process to be seen better, and any faulty functions to be recognised immediately. Thus facilitating the correct distribution of
the spraying medium.
Module 70
with blue lens*
long-range illumination, H9 blumb, 12 V
1GA 996 176-671
FF 50
with 12 V / H7 bulbs, relay with wiring and accessories,
upright surface-mounting
Spotlight, single
with blue lens
1FA 008 283-031
Fog light set
1209
1NA 008 283-801
Ultra Beam
with blue lens*
Close-range illumination, without H3 GL, AM plug-type
connection
1GA 997 506-661
*) Amber lens on request
16
Worklights
XENON
The use of xenon worklights brings clear advantages compared with the use of halogen worklights:
Worklights
■ 2.5 times the luminous flux, and thus brighter and wider illumination of the working area (compared with H3 bulb).
■ Approx. 35% less power consumption.
■ Illumination similar to daylight – for natural colour reproduction even at night.
■ No sudden light failure – impact-resistant light arc rather than a sensitive bulb filament.
■ Service life up to five times longer than that of a halogen bulb – reduced expenditure for bulb replacement.
■ Constant brightness even if there is a drop in on-board voltage.
■ Lower load on the vehicle wiring system thanks to the power consumption of only 42 W.
New 50 Watt system with 30% more light than the 42 Watt system
Module 70 X-Powerpack
Module 70 X-Powerpack
Xenon worklight, ballast integrated or external, 42 and 50
Watt systems
Surface mount version, integrated ballast, 42 Watt system,
close-range illumination, D1S
12 V
1G0 996 176-681
24 V
1G0 996 176-691
Surface mount version, external ballast, 50 Watt system
(+30% more light), Close-range illumination, D1S
12 V
1G0 996 176-621
24 V
1G0 996 176-631
%
0
+3
ht
more lig
Mega Beam X-Powerpack
Mega Beam X-Powerpack
Xenon worklight, ballast integrated or external, 42 and 50
Watt systems
Surface mount version, integrated ballast, 42 Watt system,
close-range illumination, D1S
12 V
1GM 996 135-231
12 V, 180° mounting
1GM 996 135-241
24 V
1GM 996 135-251
24 V, 180° mounting
1GM 996 135-261
Surface mount version, external ballast, 50 Watt system
(+30% more light), Close-range illumination, D1S
12 V
1GM 996 135-361
24 V
1GM 996 135-371
%
+ 30
ht
more lig
17
Worklights
XENON
Oval 90 X-Powerpack
Xenon worklight, ballast integrated or external, 42 and 50 Watt
systems
Surface mount version, integrated ballast, 50 Watt system
Close-range illumination, D1S
12 V
1GB 996 186-081
24 V
auf Anfrage
%
0
3
+
ht
more lig
Surface mount version, integrated ballast, 42 Watt system
Close-range illumination, D1S
12 V
1GB 996 186-071
24 V
on request
Surface mount version, external ballast, 42 Watt system
Close-range illumination, D1S
12 V, 24 V
on request
Oval 100 X-Powerpack
Xenon worklight, ballast integrated or external, 42 and 50 Watt
systems
Surface mount version, integrated ballast, 42 Watt system,
close-range illumination, D1S
12 V
1GA 996 461-311
12V, 180° mounting
1GA 996 461-321
24 V
1GA 996 461-331
24V, 180° mounting
1GA 996 461-341
Surface mount version, external ballast, 50 Watt system
(+30% more light) Close range illumination, D1S
12 V
1GA 996 461-591
24 V
1GA 996 461-601
%
0
+3
ht
more lig
Oval 100 Xenon Integral
with handle, switch and magnetic base
Close-range illumination, D1S
12 V
18
1GA 996 261-711
Worklights
XENON
Ultra Beam X-Powerpack
Xenon worklight, ballast integrated or external, 42 and 50 Watt
systems
12 V
12V, 180° mounting
24 V
24V, 180° mounting
Worklights
Surface mount version, integrated ballast, 42 Watt system,
Close-range illumination, D1S
1GA 998 534-431
1GA 998 534-441
1GA 998 534-451
1GA 998 534-461
Surface mount version, external ballast, 50 Watt system
(+30% more light), Close-range illumination, D1S
12 V
1GM 996 135-361
24 V
1GM 996 135-371
+ 30% t
h
more lig
AS 300 / AS 400
Heavy Duty Xenon worklight, ballast integrated. Housing either
made of glass-fibre reinforced plastic (AS 300) or diecast
aluminium (AS 400).
AS 300 close-range illumination, D1S
12 V
1GA 996 242-501
24 V
1GA 996 242-511
AS 300 long-range illumination, D1S
24 V
1GA 996 242-541
12 V
1GA 996 242-551
AS 400 close-range illumination, D1S
12 V
1GA 996 242-101
24 V
1GA 996 242-111
Accessories: HD bracket fitting for conversion
(suitable for AS 300 / 400)
8HG 990 381-001
19
Worklights
LED
M70 Generation II
Technical data
Rated voltage (UN) 12 V/24 V
4 high-power LEDs
15 Watt
protected against inverse polarity and overheating
Protective rating IP6K9K and IP X7
Light power 600 lm / 650 clm
Close-range illumination
9-33 V
1G0 996 176-721
Close-range illumination, 180° mounting
9-33 V
1G0 996 176-741
Close-range illumination, harness with AMP plug-type
connection
10-100 V
1G0 996 276-077
Close-range illumination (extra wide),
harness with DT plug-type connection
9-33 V
1G0 996 176-757
Mega Beam LED Generation II
Technical data:
Suitable for multi-voltage use
4 high-power LEDs
15 Watt
protected against inverse polarity and overheating
Protective rating IP 6K9K and IP X7
Light power 600 lm / 650 clm
Close-range illumination
9-33 V
1GM 996 136-191
Close-range illumination, 180° mounting
1GM 996 136-241
Close-range illumination,
harness with DT plug-type connection
1GM 996 136-211
10-100 V
20
on request
Worklights
LED
Power Beam 1000
Worklights
Technical data:
Multi-voltage
6 high-power LEDs
Watt 18 W
protected against inverse polarity and overheating
Protective rating IP 6K9K and IP X7
Light power 850 lm / 1000 clm
Close-range illumination,
9-33 V
1GA 996 188-001
Close-range illumination, HD all-round bracket
9-33 V
1GA 996 188-011
Close-range illumination, UL-conform, with PMMA lens
9-33 V
1GA 996 188-021
Accessories: Adapter cable
8KB 990 299-011
Power Beam 2000
Technical data:
Suitable for multi-voltage use
16 high-power LEDs
43 Watt
protected against inverse polarity and overheating
Protective rating IP 6K9K and IP 7
Light power 2000 lm / 2800 clm
Close-range illumination, cable
9-33 V
1GA 996 189-001
Close-range illumination, DT plug-type connection
9-33 V
1GA 996 189-011
Flat Beam
LED worklight for surface-mounting with low profile
2 m cable
Multivolt 9 - 33 V
60 high efficient LEDs
11 W
Light power 1000 lm
Close-range ullumination
on request
21
Worklights
ACCESSORIES
Support for pipe socket mounting
For combination with the socket pipes 8HG 002 365-001 and
8HG 006 294-...
Suitable for surface mount worklight versions
Ultra-Beam FF 1GA 007 506-..., 1GA 997 506-...,
Ultra Beam H9 1GA 996 150-..., Mega-Beam FF 1GA 996 134-...,
Oval 100 FF 1GA 9-96 161-..., A8 200 FF 1GA 998 532-...,
AS 200 Xenon 1GA 96 142-... with AMP plug-type connection or
grommet. Electrical contacting within the socket pipe through
socket in accordance with DIN 7 2 591.
Support for pipe socket mounting
8HG 990 320-001
Universal mount
Rotatable universal mount for fitting to pipes ø 15 mm - ø 26
mm. For replacement on worklights with 36 mm bracket attachment. With 2 additional narrow spacers for exchange against
wide spacers with/without vibration damping on worklights with
42 mm bracket attachment.
Universal mount
8HG 990 263-111
Magnetic bracket
For worklights with U-bracket, comprising: 2 magnets and attachment material
Magnetic bracket for attachment bracket 9XD 130 261-001
8HG 004 806-11
Attachment bracket for four-point attachment
of worklights and surface-mounted lights with attachment screw
M 10.
Attachment bracket made of stainless steel
9XS 130 261-00
Attachment bracket made of yellow-chromated steel
9XD 990 298-001
22
Front lighting
Daytime running light
When to drive with your lights on during the day?
Studies have shown: driving with your lights on during the day offers a
critical plus in safety. Your vehicle will be seen a lot more easily and the number of accidents is dramatically reduced. Taking slight accidents into account,
the number of collisions caused by not seeing the other road users will be reduced by more than 50 %.
Front lighting
For further information about Hella’s daytime running light visit us at:
www.tagfahrlicht.com
Easily overlooked during the day:
unlit vehicles
Perfect only for night-time driving:
conventional low beam
Extraordinary effect:
Hella’s special daytime running light
Its superior shape make it the perfect match for
modern vehicle fronts and a harmonious addition
of the overall vehicle design. The new daytime
running lights fit into almost any vehicle and
provide your car with extra performance:
■ Hella’s daytime running lights generate a
passive, yet radiant white signal light for more
signalling power and a noticeable plus in safety
■ Critical gain in safety by a special daytime
beam pattern
■ Protection against serious accidents
■ Automatic on / off control by turning the
ignition key
■ Significantly reduced fuel consumption
compared with driving with low beams on
Gesetzliche Vorschriften: Im Bereich ECE ist ein Tagfahrlicht für Land- und Baumschinen auf öffentlichen Straßen mit Sondergenehmigung möglich.
Im Bereich ASAE2709/SAE (USA) ist es dann möglich, wenn nicht störend ist. (Im SAE-Bereich ist das Tagesfahrlicht nicht über die FMVSS108 geregelt.)
LED
Set of rectangular LED daytime running lights
2 lights and harness, universal bracket,
3 high-performance LEDs per light, multi-voltage 9–33 V
12 V / max. 5.5 W, power consumption approx. 2.18 A
For surface-mounting
2PT 009 496-801
Single light without bracket,
DRL function only
2PT 009 496-011
2344
Single light without bracket,
DRL plus PL function
2PT 009 496-007
23
Front lighting
Daytime running light
LED
LEDayLine®, set of daytime running lights
2 lights with five LEDs per light plus integrated relay for fully
automatic turning on; set includes professional harness and
mounting material, multi-voltage 9–32 V
12 V / max. 5.5 W, power consumption approx. 0.36 A
24 V / max. 11 W, power consumption approx. 0.36 A
Set for surface-mounting
2PT 010 043-801
2578
Set of round LED daytime running lights
2 lights plus harness, universal bracket,
3 high-performance LEDs per light, multi-voltage 9–33 V
12 V / max. 5.5 W, power consumption approx. 2.18 A
For surface-mounting
2PT 009 599-801
Single light without bracket
left
right
without bracket, with PL function
left
right
2372
2PT 009 599-011
2PT 009 599-021
2PT 009 599-041
2PT 009 599-031
Universal carrier frame
9AH 165 968-001
LED
LED round front indicator, front position,
safety daylights
10
E24
Ø83.0
Ø74
Ø71
25.5
TOP
Ø6.3 (1/4" UNC) 22
21
42.2
3 function combination lamp with high-performance LEDs,
clear lens, pre-wired with 2.5 m of four core sheathed cable,
ECE and EMC approval, 24 V
Single light
for flush-mounting and surface-mounting
2BE 980 690-101
Set of daytime running lights
2 lights incl. harness, bulbs and universal bracket.
2PT 008 362-801
1032
24
Front lighting
Low beam headlights and spotlights, 90 mm modules
ium
m
e
r
P
High-end illumination. Low beam and high beam from a single headlight module, using either xenon or halogen technology.
Pattern-free glass cover lens. High-grade aluminium reflector. Waterproof electronic ballast with the xenon version. Connection
through a 0.5 m shielded supply cable with detachable plug connection.
Bi-Xenon
Bi-Xenon headlights
(illustration only shows low beam light distribution)
Bi-Halogen
Xenon low beam and high beam in one headlight, xenon low
beam only permissible with headlight range adjustment and
lens cleaning system. See page 22/23.
Right-hand traffic, D2S, ECE
12 V
1AL 009 997-001
24 V
1AL 009 997-041
Left-hand traffic, D2S, ECE
12 V
1LL 009 997-011
24 V
1LL 009 997-051
Right-hand traffic, D2S, SAE
12 V
1AL 009 997-021
Bi-halogen headlight
Low beam headlights and spotlights
(illustration only shows low beam light distribution)
Halogen
Halogen low beam and high beam in one headlight.
Right-hand traffic, H7, ECE
12 V
1AL 009 998-001
24 V
1AL 009 998-007
Left-hand traffic, H7, ECE
12 V
1LL 009 998-011
24 V
1LL 009 998-051
Right-hand traffic, H7, SAE
12 V
1AL 009 998-021
24 V
1AL 009 998-041
Halogen low beam headlight
Metal reflectors with clear DE lens. Ideal in combination with
the matching spotlights and fog lights.
Incl. light sources.
Right-hand traffic, H7, ECE
12 V
1BL 009 999-001
24 V
1BL 009 999-002
Left-hand traffic, H7, ECE
12 V
1ML 009 999-011
24 V
1ML 009 999-051
Right-hand traffic, H7, SAE
12 V
1BL 009 999-021
25
Front lighting
Low beam headlights and spotlights
Front lighting
Low beam headlights and spotlights, 90 mm modules
nce
a
m
r
Perfo
Optimised illumination. Even higher quality modules for use on long journeys.
With splashwater-proof plug-type connection.
Halogen
Low beam headlight, 12 V
Module headlight with aluminium reflector and clear DE lens
behind pattern-free glass cover lens
Right-hand traffic, H1
1BL 247 042-007*
1BL 247 042-001*
Left-hand traffic, H1
1BL 247 042-027*
1BL 247 042-021*
2397
* Right-hand traffic version can be changed over from asymmetrical low beam to symmetrical light.
Left-hand traffic version can be changed over from symmetrical to asymmetrical.
Halogen
Spotlight, 12 V
Module headlight with aluminium FF reflector and clear DE
lens behind pattern-free glass cover lens
with position light, H1
1K0 247 043-007
1K0 247 043-001
2397
Halogen
Spotlight, 12 V
without position light
1K0 247 043-017
1K0 247 043-011
2397
26
(illustration only shows low beam light distribution)
Front lighting
Low beam headlights and spotlights, 90 mm modules
Bi-Xenon
ic
Class
Bi-xenon headlight, 12 V
Low beam and high beam from one headlight
Module headlight with integrated ignition unit and pattern-free
glass cover lens. High-grade metal reflector.
Waterproof Xenon electronic ballast.
1 metre shielded supply cable with detachable plug connections
1677
Right-hand traffic
Left-hand traffic
SAE (USA) right-hand traffic
1AL 008 934-001*
1LL 008 934-011*
1AL 008 934-041
Accessories for bi-xenon
* Right-hand traffic version can be changed over from asymmetrical low beam to symmetrical light.
Left-hand traffic version can be changed over from symmetrical to asymmetrical.
Xenon
Plug for ballast
Plug for switching to high beam
8JA 990 295-127
8JD 162 211-801
Low beam headlight, 12 V
Module headlights with pattern-free glass cover lens,
magnesium reflectors with clear DE lens
Xenon low beam headlights
12 V, Right-hand traffic, D2 S
24 V, Right-hand traffic, D2 S, ECE
12 V, Left-hand traffic, D2 S
24 V, Left-hand traffic, D2 S, ECE
12 V, D2 S, USA-Version
917
Halogen
Halogen low beam headlights
(H7)
143 (H9)
917
Xenon
1BL 008 194-007
1BL 008 194-027
1LL 008 194-037
1LL 008 194-051
1BL 008 194-047
12 V, H7, Right-hand traffic
24 V, H7, Right-hand traffic
12 V, Left-hand traffic
24 V, Left-hand traffic
12 V, H9, USA-Version
1BL 008 193-001
1BL 008 193-017
1LL 008 193-117
1LL 008 193-127
1BL 008 193-021
Spotlight, 12 V
Module headlight with magnesium FF reflectors
and pattern-free glass cover lens.
Xenon spotlights
917
with position light
without position light
1K0 008 192-007
1K0 008 192-017
Halogen spotlights
Halogen
with position light
without position light
without position light, USA version
with position light , USA version
1K0 008 191-001
1K0 008 191-017
1K0 008 191-051
1K0 008 191-131
917
Xenon low beam only permissible with headlight range adjustment and lens
cleaning system. See page 22/23.
27
Front lighting
(Darstellung nur Lichtverteilung Abblendlicht)
Front lighting
Accessories
Rubber caps for 90 mm halogen H7, Classic
Connection plug set
Classic + Performance + Premium
● Low beam headlights 008 193-…
non-ventilated
for Xenon ballasts, halogen, bi-halogen and
DynaView® Evo2
for 20 headlights
8JD 156 151-807
flat version for angled plugs
9GH 152 654-012
deep version for socket housing
9GH 145 943-012
● Spotlights 008 191-…
ventilated
Connection plug set Classic
H9 008 191-... and 008 193-..., for USA version
for 20 headlights
8JD 158 175-807
flat version for angled plugs
9GH 152 654-007
deep version for socket housing
9GH 145 943-001
Halogen H9:
Sealed through connection system, no cap required
Carrier frame
for low beam headlights and spotlights
9AH 157 659-007
9AH 169 580-011
9AH 254 228-017
Connection plug set Classic + Performance
for position light
for 20 headlights
8JD 156 150-807
Actuator motors for headlight range adjustment Classic
for 12 V halogen headlights
6NM 007 282-227
for 24 V halogen headlights
6NM 008 299-501
for 12 V Xenon headlights
6NM 007 282-231
28
Front lighting
50 mm Premium headlight modules
Low beam headlight
Installation frame for 3-point fastening,
adjustable from the front and rear
Xenon
1904
12 V, Right-hand traffic, D2S
24 V, Right-hand traffic, D2S, ECE
12 V, Left-hand traffic, D2S
1903
Halogen
1BL 009 071-047
1BL 009 071-067
1ML 009 071-057
12 V, Right-hand traffic, H7
24 V, Right-hand traffic, D2S, ECE
12 V, Left-hand traffic, H7
24 V, Left-hand traffic, D2S, ECE
1904
1BL 009 071-007
1BL 009 071-027
1ML 009 071-017
1ML 009 071-037
Spotlight
3-point attachment, setting screw adjustment
Xenon
rear carrier frame is not part of the scope of supply
(see accessories), D2S
12 V
1F0 008 390-317
24 V
1F0 008 390-327
1120
147,6
95,2
Halogen
H9
12 V
2198
1KL 009 486-001
Zubehör 50 mm Scheinwerfer-Module
Carrier frame (not for halogen spotlights)
Plastic cap
without headlight range adjustment fixture 9AH 161 786-017
with headlight range adjustment fixture 9AH 161 784-017
for fog lights
9HD 149 253-007
Rubber cap
for halogen low beam headlights
for fog lights
9GH 152 654-007
9GH 147 009-007
Actuator motors for headlight range adjustment
for 12 V halogen
for 24 V halogen
for 12 V Xenon
6NM 007 282-221
6NM 008 299-501
6NM 007 282-231
Connection plug set
for plastic cap
8JD 156 150-807
29
Front lighting
1903
Front lighting
Various low-beam headlights and spotlights
Module 60, 12V
Flush mount headlight with HB3 bulb. Reflector glued to the
lens. Light aperture Ø 60 mm. FMVSS 108 - Motorcycle DOT
tested.
DE® HB3 low-beam headlight
1BL 998 570-001
DE® HB3 spotlight without position light
1KL 998 570-021
10894
10895
10892
DE® HB3 spotlight with position light
1KL 998 570-031
M 133
Headlight for flush mounting with H4 bulb and pattern-free
glass lens. With 12V bulbs and protective cap.
Light aperture Ø 135 mm. (Cannot be used for vehicle categories N and M). FMVSS 108 - Motorcycle DOT tested.
with position light
1A3 996 162-021
without position light
10198
10238
1A3 996 162-091
Oval 100, 12V
Headlight for surface or flush mounting with H7 bulb and pattern-free glass lens. Light aperture 130 x 75 mm.
Flush mount headlight with lens carrier frame adjustable by
6°.
H7 flush mount low-beam headlight, with oval lens carrier frame
1BA 996 261 021
H7 flush mount spotlight, with oval lens carrier frame
1KA 996 261-091
H7 low-beam headlight, with rectangular lens carrier frame
suitable for other installation recesses.
1BA 996 261 081
H7 low-beam headlight for surface mounting
1BA 996 261 001
H7 surface mount spotlight with rotating joint at the side
1AB 996 261-117
H7 surface mount headlight - left-hand traffic
1MA 996 261-131
0004
30
0005
10893
Front lighting
Various low-beam headlights and spotlights
Oval 90, 12V
Headlight for surface mounting with H7 bulb with symmetrical
light distribution.
H7 low-beam headlight for surface mounting, with 12 V GL
1TB 996 286-021
H7 surface mount headlight, with 12 V GL
1KB 996 286-031
Front lighting
ANSI-ASAE 0608
Oval 120
Headlight with H4 or HB2 bulb
Light aperture 130 x 75 mm. FMVSS 108 tested.
Surface mount version
with position light and AMP plug-type connection, 4-pole
right-hand traffic
12 V HB2 GL
1AB 996 157-151
24 V H4 GL
1AB 996 157-161
without position light with grommet
12 V HB2 GL
1AB 996 157-131
without position light with grommet - left-hand traffic
without bulb
1AB 996 157-181
with position light and grommet - left-hand traffic
without bulb
1AB 996 157-191
1502
Flush mounting - inclination can be adjusted by 4°.
with position light
12 V HB2 GL
1AB 996 157-091
without position light
12 V HB2 GL
1AB 996 157-081
1503
C 220
Headlight for surface mounting with H7 low beam, H3 spotlight, position light with integrated indicator to the front and
rear (category 1, 1a and 5).
Light aperture 120 x 120 mm.
Surface mount headlight with 6-pole Deutsch plug, upright
surface mounting, 12 V
Surface mounting left
1EE 996 174-051
Surface mounting right
1EE 996 174-061
Surface mount headlight with Deutsch plug, 6-pole and central attachment, 12 V
Surface mounting left
1LE 996 174-011
Surface mounting right
1EE 996 174-021
Surface mount headlight with 6-pole Deutsch plug, upright
surface mounting, 24 V
on request
11372
11373
6556
31
Front lighting
Various low-beam headlights and spotlights
Module 6214
Headlight for surface or flush mounting with 12 V H4 bulb
and clear lens. High beam, low beam and position light. Cannot be used for vehicle categories N and M.
H4 flush mount headlight, right-hand traffic
12V
1AB 996 214-041
H4 surface mount headlight, right-hand traffic
12V
1AB 996 214-011
H4 surface mount / flush mount headlight, left-hand traffic
12V
1AB 996 214-011
24V
on request
10869
10906
Surface mount headlight especially for forklift trucks
with integrated indicator and position light. Developed especially for mounting to vertical surfaces. Mounting with 2 screws (M6). Vertical adjustment from + 4° – 21°. ECE
H7 low-beam headlight for surface mounting
12V
1BR 996 171 101
H7 low-beam headlight for surface mounting
24V
1BR 996 171 111
12666
32
Front lighting
Auxiliary front lighting
Indicator
with amber 12 V / 21 W bulb fitted
2BA 008 221-107
2BA 008 221-217
878
Position light
LED
Front lighting
(not illustrated, version as indicator), 12 V, 24 V
2PF 008 221-011
Harness with grommet
8KA 152 134-007
879
Chrome-plated circular plate for flush-fitting
8XU 008 405-301
Position light 1696
for flush-fitting
12 V
2PF 008 405-061*
12 V / 1.8 W, current consumption = approx. 0.15 A
24 V
2PF 008 405-051
24 V / 1,8 W, current consumption = approx. 0,08 A
60 mm Premium lights
6546
Indicator
12 V
2BA 009 001-071
24 V
2BA 009 001-167
12 V
2BA 009 001-091
with silver-coloured bulb
12 V
2BA 009 001-201
Type approval
ECE SAE
(USA)
X
X
■
X
7613
Position light
12 V
2PF 009 001-081
24 V
2PF 009 001-177
LED
X
X
■
■
60 mm Premium LED light
Position light, for flush-fitting, with 12 LEDs
2PF 009 001-421*
2PF 009 001-521*
12390
33
Front lighting
Auxiliary front lighting
max. installation depth
90 mm
Indicator
12 V
2BA 965 039-067
24 V
2BA 965 039-147
Position light
12 V
2PF 965 039-071
24 V
2PF 965 039-151
10215
6550
Type approval
ECE
SAE
(USA)
X
X
■ ●
X
X
■●
■●
Oval light series
for horizontal or vertical surface-mounting, with grommet
Indicator, without bulb (USA)
12/24 V 2BA 343 130-057
Indicator/position light, without bulb
12/24 V 2BE 343 130-007
10202
Type approval
ECE SAE
(USA)
X
■●
X
LED
110 mm round LED lamps
44
3 x PCD ø96
Low profile LED Direction Indicator, Position Lamps with highintensity LEDs and polycarbonate lens, Pre-wired with 200
mm of cable, ECE and EMC approval, Multivolt 9 - 33 V.
ø110
ø125
ø133.0
For flush-mounting and surface-mounting
2BE 959 932-131
Black Base
2BE 959 932-151
LED
Position light
for horizontal or vertical flush-fitting
with 0.5 m cable, 10 – 33 V
2PF 959 590-401*
with 5 m cable, 10 – 33 V
2PF 959 590-411*
12 V / 0.5 W, current consumption = approx. 0.04 A
7597
e
34
031721
Front lighting
Auxiliary front lighting
789
Position light
378
for horizontal or vertical surface-mounting, 12 V
with reflector
2PG 006 717-021
without reflector (not illustrated)
2PF 006 717-011
Position light
for surface-mounted to sloping surfaces, for 12 and 24 V
without reflector for slopes from +15° to -30°
2PF 004 081-001
without reflector for slopes of 23° (not illustrated)
2PF 004 081-107
21656
Position light
for horizontal or vertical flush-fitting,
with pre-fitted 12 V / 3 W bulb
with reflector
2PF 962 964-041
Seal (please order separately)
7499
9GD 963 281-001
Grommet (please order separately)
3153
9GT 963 129-001
Position light
for horizontal flush-fitting,
with pre-fitted 12 V / 5 W bulb and seal
with reflector
2PG 964 295-011
9806
for horizontal or vertical flush-fitting
without reflector (not illustrated)
811
LED
2PF 964 295-021
Position light
for horizontal surface-mounting,
with reflector, with 2 LEDs
2PG 964 295-121*
12 V / 0.3 W, current consumption = approx. 0.03 A
0301
35
Front lighting
803
Rear lighting
Combination rearlight
0303
LED
for horizontal flush mounting, vertical surface mounting
with integrated reflector
for 12 V and 24 V
left
2VA 343 640-077
left
2VA 343 640-027
right
2VA 343 640-067
Type approval
ECE SAE
(USA)
X
X
X
Tail-stop-indicator light for horizontal surface mounting
With ECE and EMC type approval.
With red/amber/red lens and black housing, 2 LEDs for indicator, 1 LED
for taillight, 1 LED for stoplight. The light is also approved for twin fitting
per side.
13136
e
030203
Light is fitted with a 3A fuse.
Multi-voltage 9-32 V
2SD 344 100-101*
Indicator:
12 V/2 W, current consumption - approx. 0.17 A
24 V/4 W, current consumption - approx. 0.17 A
Taillight:
12 V/1 W, current consumption - approx. 0.08 A
24 V/2 W, current consumption - approx. 0.08 A
Stoplight:
12 V/2 W, current consumption - approx. 0.17 A
24 V/3 W, current consumption - approx. 0.125 A
Protective rating: IP 6K9K
With patented electronics for indicator failure check.
Chrome ring for attachment bracket for flush mounting
9XD 997 909-801
Tail-stop-indicator light for horizontal flush mounting
Slim design option as flush mount version.
13136
e
030203
■ SAE type approval for vehicles < 2,032 mm width
● SAE type approval for vehicles > 2,031 mm width
taillight
stoplight
indicator
Reflector
Side marker light with reflector
36
Can also be used in the bulb housing variant 001685-211 /-231 /-307
Multi-voltage 9-32 V
2SD 334 100-001*
Rear fog light
Licence plate light
Reverse light
Rear lighting
LED
10880
10880
Combination rearlight
With 12 V LED, for horizontal flush mounting,
in brilliant-look finish
2SB 008 982-307
red lens
2SB 008 982-001
red lens
24 V/3 W, current consumption - approx. 0,13 A
2SB 008 982-367
clear-glass lens
12 V/3 W, current consumption - approx. 0,25 A
2BA 008 982-347*
clear-glass lens
12 V/2 W, current consumption - approx. 0,17 A
* with impulse for indicator failure check
2BA 008 982-041
clear-glass lens
24 V/2 W, current consumption - approx. 0,08 A
Type approval
ECE
SAE
(USA)
X
X
X
X
X
Accessories
for LED and bulb version
8GD 158 740-007
Seal
Combination rearlight for 12 V, 24 V
10151
2SA 008 805-007
2DA 008 805-017
2SB 008 805-027
2BA 008 805-057
2NE 008 805-037
2ZR 008 805-047
Type approval
ECE
SAE
(USA)
X
X■●
approved for twin fitting
X
X■●
approved for twin fitting X
X■●
clear-glass lens
X
X■●
X
X■●
X
X■●
Rear lighting
for horizontal flush mounting
in brilliant-look finish
Combination rearlight
With fitted 12 V bulb
in brilliant-look finish
with 100 mm cable and 2-pole AMP plug
2BA 008 805-217
clear-glass lens
2SB 008 805-207
clear-glass lens
Type approval
ECE
SAE
(USA)
X
X
10151
LED
12386
Tail-stoplight for vertical flush mounting
with clear-glass lens, 32 red LEDs, 12 V
Taillight:
12 V/3 W, current consumption - approx. 0.25 A
Stoplight:
12 V/3 W, current consumption - approx. 0.25 A
12 V
2SB 008 982-207*
LED
Indicator for vertical flush mounting (category 2a)
with clear-glass lens and 32 amber LEDs
12 V/2 W, current consumption - approx. 0.17 A
With patented electronics for indicator failure check
12386
12 V
2SB 008 982-217*
37
Rear lighting
LED
For surface or flush mounting.
with 37 red LEDs, cable 500 mm long, without plug.
with ECE and EMC type approval
Tail-stoplight, red lens 1
24 V/5.7 W, current consumption = approx. 0.24 A
24 V
2SB 964 169-301* / 307
Taillight = 0.7 W / Stoplight = 5 W
814
1
e
020047
Rear fog light, red lens 2
24 V/4 W, current consumption = approx. 0.17 A
24 V
2NE 964 169-341*
Reverse light, clear-glass lens, with 37 white LEDs.
with ECE type approval, 24 V/5 W, current consumption = approx. 0.21 A
3810
e
2
23254
020050
LED
3
left
24 V
right
2ZR 964 169-351*
24 V
2ZR 964 169-361*
Tail-stop-indicator light for surface mounting
Redesign of the 964 169 series, with 500 mm cable without plug,
with ECE and EMC type approval. With clear-glass lens, 24 LEDs.
Multi-voltage 9-32 V
Multi-voltage 9-32 V
12371
1
12658
e
034895
2
12658
e
12371
034895
1
2SD 344 200-001*
2SD 344 200-007*
Indicator:
12 V/1 W, current consumption = approx. 0.08 A
24 V/2 W, current consumption = approx. 0.08 A
Taillight:
12 V/0.5 W, current consumption = approx. 0.04 A
24 V/1 W, current consumption = approx. 0.04 A
Stoplight
12 V/1 W, current consumption = approx. 0.08 A
24 V/2 W, current consumption = approx. 0.08 A
Protective rating: IP 6K9K
With patented electronics for indicator failure check.
Tail-stoplight for surface mounting
Multi-voltage 2
2SB 344 200-027*
Stoplight:
12 V/2 W, current consumption = approx. 0.17 A
24 V/3 W, current consumption = approx. 0.13 A
Taillight:
12 V/0.5 W; current consumption = approx. 0.04 A
24 V/1 W, current consumption = approx. 0.02 A
Protective rating: IP 6K9K
Indicator for surface mounting
Multi-voltage 9-32 V 3
2BA 344 200-037*
12 V/1.5 W, current consumption = approx. 0.125 A
24 V/3 W, current consumption = approx. 0.125 A
Protective rating: IP 6K9K
With patented electronics for indicator failure check.
12658
12371
38
3
e
034895
Rear lighting
LED
Indicator for rear flush mounting (category 2a)
With ECE and EMC type approval.
With amber lens
24 V
12 LEDs and 2,500 mm cable.
2BA 959 011-301*
24 V
2BA 959 011-307*
24 V/2 W, current consumption = approx. 0.08 A
12373
e
031671
Protective rating: IP6K9K
With patented electronics for indicator failure check.
LED
Tail-stoplight for flush mounting
24 V
12 LEDs and 2,500 mm cable.
2SB 959 010-301*
24 V
2SB 959 010-307*
Rear lighting
With ECE and EMC type approval.
With red lens
Taillight: 24 V/1 W, current consumption = approx. 0.04 A
Stoplight: 24 V/3 W, current consumption = approx. 0.125 A
12373
031671
Protective rating: IP6K9K
LED
Rear fog light for flush mounting
With ECE and EMC type approval.
Multi-voltage 9-33 V
2NE 959 011-501*
2NE 959 011-507*
Clear-glass lens, with 24 LEDs and 2,500 mm
cable. Multi-voltage 9-33 V
12 V/3 W, current consumption = approx. 0.25 A
24 V/3 W, current consumption = approx. 0.13 A
11391
031671
LED
Protective rating: IP6K9K
Reverse light for flush mounting
With ECE and EMC type approval.
Multi-voltage 9-33 V
2ZR 959 010-501*
2ZR 959 010-507*
Clear-glass lens, with 24 LEDs and 2,500 mm
cable. Multi-voltage 9-33 V
12 V/4 W, current consumption = approx. 0.33 A
24 V/4 W, current consumption = approx. 0.17 A
11391
031671
Protective rating: IP6K9K
39
Rear lighting
Combination rearlight
for surface-mounting or flush-fitting
brilliant finish
2BA 964 169-507
653
2SB 964 169-537
816
2ZR 964 169-517
2312
2NE 964 169-527
3809
as above, but without fastening screws
2BA 964 169-647
653
2SB 964 169-677
816
2ZR 964 169-657
2312
2NE 964 169-667
3809
as above, but with 2 fastening screws, 200 mm cable,
24 V bliumb and 2 pole Deutsch plug
2BA 344 169-007
653
2SB 344 169-017
816
Type approval
ECE SAE
(USA)
X
X■●
X
X■●
X
X■●
X
X■●
X
X
X
X
X■●
X■●
X■●
X■●
X
X
X■●
X■●
Combination rearlight
for surface-mounting or flush-fitting
2DA 964 169-001/7
2BA 964 169-011/7
2NE 964 169-021/7
2ZR 964 169-031/7
2BA 964 169-041/7
2BN 964 169-051/7
2TA 964 169-061/7
2BE 964-169-071/7
2SW 964 169-081/7
2SA 964 169-091/7
2SD 964 169-111/7
2TA 964 169-147
2SB 964 169-287
indicator, position
but without fastening screws
2NE 964 169-227
2BA 964 169-237
2BN 964 169-247
2TA 964 169-257
2SA 964 169-277
2SB 964 169-717
2DA 964 169-727
2ZR 964 169-737
808
648
3808
2311
9804
9801
9805
9802
9803
810
9903
815
3808
648
9801
9805
810
815
805
2311
as above, but with 2 fastening screws, 150 mm cable,
24 V bliumb and 3 pole Deutsch plug
2TA 964 169-767
rechts 9805
2TA 964 169-797
links 9805
2BN 964 169-777
links 9801
2BN 9064 169-787 rechts 9801
■ SAE type approval for vehicles < 2,032 mm in width
● SAE type approval for vehicles > 2,031 mm in width
Taillight
Stoplight
Indicator
Reflector
Side marker light with reflector
40
Rear fog light
Licence plate light
Reverse light
Type approval
ECE SAE
(USA)
X
X■●
X
X■●
X
X■●
X
X■●
X
X
X■
X
X■
X
X
X■
X
X■●
X
■
X
X■●
X
X
X
X
X
X
X
X
X■●
X■
X■
X■
X■●
X■●
X■●
X■●
X
X
X
X
X■●
X■●
X■●
X■●
Rear lighting
LED
EuroLED
for surface-mounting, cast in one piece with black base plate,
electrical connection through a cable 2500 mm long,
Multi-volt 9-33 V, with 1 Power-LED
Type approval
ECE SAE
(USA)
2SB 959 821-601
X
2ZR 959 820-601
X
2BA 959 822-601*
X
12 V / 2.5 W, current consumption = approx. 0.21 A
2NE 959 821-201
X
12 V / 4 W, current consumption = approx. 0.33 A
* with impulse for indicator failure check, see page 7
SAE versions on request.
10208
021135
LED
Rear Combination Lamps
26
LED stop, rear position and rear indicator lamp with 18 cm2 red reflex
reflector, clar lens design with black mounting base, Horizontal surface
mount, Multivolt 9 - 33 V
Rear lighting
e
80
96
Without ECE approval
2VA 980 720-001
With ECE approval
on request
on request with licence plate light
LED
DuraLED Combi
for horizontal surface-mounting, clear-glass lens,
with 40 LEDs and potted cable 2,500 mm long
with stripped cable ends, multi-volt 8-28 V
10176
2SD 959 050-401*
Taillight 8 reds LEDs
12 V / 1,5 W current consumption = approx. 0,13 A
24 V / 1,5 W current consumption = approx. 0,06 A
Stoplight 24 reds LEDs
12 V / 5 W current consumption = approx. 0,42 A
24 V / 5 W current consumption = approx. 0,21 A
Indicator 16 yellow LEDs
12 V / 3 W current consumption = approx. 0,25 A
24 V / 3 W current consumption = approx. 0,13 A
031586
Type approval
ECE SAE
(USA)
X
* with impulse for indicator failure check, see page 7
Taillight
Reflector
Stoplight
Indicator
Side marker light with reflector
Rear fog light
Licence plate light
Reverse light
Park light
41
Rear lighting
Combination rearlights
1051,
879,
878
1048,
1049
1050
1052
LED
12 V and 24 V, for flush-fitting
Taillight
with 12 V/5 W bulb fitted
2XA 008 221-021
2SA 008 221-127
Stoplight
with 12 V/21 W bulb fitted
2XA 008 221-021
2DA 008 221-167
Indicator with smoked glass
with amber 12 V/21 W bulb fitted
2BA 008 221-041
2BA 008 221-147
Rear fog light
with 12 V/21 W bulb fitted
2NE 008 221-031
2NE 008 221-137
Reverse light with smoked glass
with 12 V/21 W bulb fitted
2ZR 008 221-051
2ZR 008 221-157
Accessories for series 008 221-....
Harness with grommet
Separate grommet
8KA 152 134-007
9GT 137 236-007
Accessories for series 008 221-....
Chrome-plated circular plate
for flush-fitting
8XU 008 405-031
LED combined circular tail/clearance light
for flush-fitting
12 V
24 V
55
98
LED combined circular tail/stoplight
1197
29
20
2SA 008 405-021* /027
2SA 008 405-011 /017
1196
12 V
24 V
2SB 008 405-101*
2SB 008 405-091
Circular reflector
for flush-fitting
LED
8RA 008 405-001 /7
Examples for combination possibilities
Rear lighting
2BA 008 221-041
und 2SA 008 405-021
Rear lighting
2XA 008 221-021
und 8RA 008 405-001
55
42
29
20
98
Accessories
Heat conducting shield
(required in the case of > 50 °C ambient temperature)
9XB 161 749-007
Rear lighting
60 mm Premium lights
12 V
12 V
24 V
12 V
24 V
12 V
2BA 009 001-201
2NE 009 001-027
2NE 009 001-127
2ZR 009 001-017
2ZR 009 001-117
8RA 009 001-037
Macro-Rückstrahler
red
red
red
red
red
red
grey
grey
green
grey
with silver vision bulb
clear-glass
red
red
grey
red
Macro reflector
X
X
X
X
X
X
X
X
Rear lighting
3917, 6546,
7613, 23255
● with pre-fitted 12 or 24 V bulbs
12 V
2SA 009 001-047
24 V
2SA 009 001-137
12 V
2DA 009 001-057
24 V
2DA 009 001-147
12 V
2SB 009 001-067
24 V
2SB 009 001-157
12 V
2BA 009 001-007
12 V
2BA 009 001-191
24 V
2BA 009 001-107
12 V
2BA 009 001-191
Type approval
ECE SAE
(USA)
X
X
X
X
X
X
X
X
X
X
X
3189
LED
● 12 Power Topled LEDs
12 V / 3 W Stromaufnahme ca. 0,25 A
12 V
2SB 009 001-401
clear-glass
X
● 12 Power Topled LEDs
12390
for back surface-mounting, 12 V / 3 W current consumtion approx. 0,25 A
12 V
2BA 009 001-411
clear-glass
X
24 V
2BA 009 001-511
clear-glass
X
● Design ring Ø 71,6 mm
suitable for 60 mm light modules Ø 71,6 mm
(Part number … 009 001-...),
one “click” is all it takes for a perfect high-sheen finish
high-sheen chrome-plated
9HB 161 122-012
silver
9HB 161 122-007
Premium silver
9HB 164 168-002
Combination example
of a combination rearlight 009 001 with a high-sheen
chrome-plated design ring
■ SAE type approval for vehicles < 2,032 mm in width
● SAE type approval for vehicles > 2,031 mm in width
Taillight
Stoplight
Indicator
Reflector
Side marker light with reflector
Rear fog light
Licence plate light
Reverse light
43
Rear lighting
LED
Ring modules
available either with a clear-glass or red cover lens
7747
7748
● Ring module, 12 V
Type approval
2SB 009 362-041*
2SB 009 362-021*
8RA 009 362-001*
24 V 2SB 009 362-011*
ECE SAE
(USA)
X
X
X
X
red
clear-glass
red
red
● Ring module without light function
for setting up
optically symmetrical light units
8XU 009 362-101
8XU 009 362-111
red
clear-glass
● Design ring Ø 118 mm
suitable for ring module 009 362
one “click” is all it takes for a perfect high-sheen finish
high-sheen chrome-plated
silver
9HB 163 085-012
9HB 163 085-001
Combination example
Macro reflector, ring module 009 362 and high-sheen
chrome-plated design ring
7748
Zubehör 60 mm Heckleuchten
Adapter ring to be screwed in place from the front
for combination rearlights Ø 60 mm
Direct mounting and mounting in the ring module
black
9XD 161 119-007
44
Adapter ring
for mounting LED lights or the reflector in the ring module
black (not illustrated)
9XD 161 119-017
Locking ring for front-end installation
silver-coloured
8HG 162 530-007
Counter-plug set
2-pin
8JD 156 150-807
Counter-plug set
3-pin
8JD 162 581-802
Rear lighting
LED
Tail-stop-indicator light SAE for rear flush mounting
Combined tail, stop, indicator light
Type approval
ECE SAE
(USA)
Clear-glass lens, with 24 red LEDs.
Matching the light series 009 362-..., 009 001-...
12 V (clear-glass) 4.8 W, current consumption = approx. 0.4 A
2SD 009 362-201*
7747
max. Einbautiefe
X■●
Combination rearlight Ø 90 mm
10215
Mounting possible from the front with clips included loose Type approval
or from the rear using screws
ECE SAE
(USA)
12 V
2SA 965 039-001
X
X■●
24 V
2SA 965 039-061/7 X
X■●
12 V
2DA 965 039-011
X
X■
24 V
2DA 965 039-091
X
X■
12 V
2BA 965 039-021/7 X
X■
24 V
2BA 965 039-101/7 X
X■
12 V
2NE 965 039-031/7 X
X■●
24 V
2NE 965 039-111/7 X
X■●
12 V
2ZR 965 039-041/7 X
X■●
24 V
2ZR 965 039-121/7 X
X■●
12 V
2SB 965 039-051/7 X
X■
24 V
2SB 965 039-131/7 X
X■
with mounting clips installed
12 V
2SA 965 039-307
12 V
2DA 965 039-317
12 V
2BA 965 039-347
12 V
2NE 965 039-327
12 V
2ZR 965 039-337
12 V
2SB 965 039-357
X
X
X
X
X
X
X■●
X■
X■
X■●
X■●
X■
“Oval” combination rearlight - brilliant finish
suitable for horizontal and vertical flush-fitting and surface-mounting,
right or light (= turn light through 180°),
can be used for 12 V and 24 V operation,
before installation, break out the water drain hole and insert the seal,
black housing colour, clear cover lens
Type approval
ECE
SAE
(USA)
2SB 343 130-021/7 7698
X
■●
2BA 343 130-051/7 6550
X
■●
2NE 343 130-031/7 3919
X
2ZR 343 130-041/7 23257
X
■●
■ SAE type approval for vehicles < 2,032 mm in width
● SAE type approval for vehicles > 2,031 mm in width
Taillight
Stoplight
Indicator
Reflector
Side marker light with reflector
Rear fog light
Licence plate light
Reverse light
45
Rear lighting
for flush-fitting, brilliant look,
screw heads not visible,
with bulbs installed, also available as daytime running light,
reverse light and rear indicators with smoked glass lens
Rear lighting
“Oval Light” combination rearlight
for horizontal and vertical surface-mounting,
lens with striped look, housing with a black edge
all the way round, completely pre-mounted,
with 100 mm cable and 12 V bulb fitted
left
right
left
right
left
right
left
right
left
right
left
right
LED
2SA 343 400-217
2SA 343 400-227
2DA 343 400-237
2DA 343 400-247
2ZR 343 400-297
2ZR 343 400-307
2NE 343 400-277
2NE 343 400-287
2BA 343 400-257
2BA 343 400-267
2SB 343 400-317
2SB 343 400-327
823
823
821
821
2314
2314
3812
3812
655
655
822
822
Type approval
ECE SAE
(USA)
X
X
X
X
X
X
X
X
X
X
X
X
“Oval” combination rear light
for horizontal and vertical surface-mounting, clear-glass lens,
24 LEDs, can be used right and left, turned through 180°,
2 body fastening screws (diagonal arrangement)
with cable 100 mm long, multi-volt 9-32 V
All LED lights have been designed for operation in DC voltage networks.
Their operation with pulsed supply voltage or alternating current is not
permissible.
034631
11785
12381
2SD 343 390-017*
2BA 343 390-071*
9 V / 2,0 W, current consumption = ca. 0,22 A
32 V / 2,9 W, current consumption = ca. 0,09 A
24 amber LEDs
with patented electronics for indicator failure check, see page 7
2SB 343 390-091*
Stoplight : 12 rote LED’s (reduzierte Leistung)
Taillight :
12 rote LED’s
X
Stoplight :
9 V / 0,2 W, current consumption = ca. 0,02 A
32 V / 0,6 W, current consumption = ca. 0,09 A
Taillight :
9 V / 1,6 W, current consumption = ca. 0,02 A
32 V / 2,5 W, current consumption = ca. 0,08 A
46
● 12 red LEDs for stoplight
9 V / 0.9 W, current consumption = approx. 0.1 A
32 V / 1.2 W, current consumption = approx. 0.04 A
● 12 red LEDs for taillight reduced power
9 V / 0.2 W, current consumption = approx. 0.02 A
32 V / 0.3 W, current consumption = approx. 0.01 A
● 12 amber LEDs for indicator (SAE version 12 red LEDs)
with patented electronics for indicator failure check, see page 7
9 V / 1.2 W, current consumption = approx. 0.13 A
32 V / 2.1 W, current consumption = approx. 0.07 A
Rear lighting
LED
Tail-stop-indicator only for vertical flush mounting
With 24 LEDs. With 4-pole Deutsch plug integrated in the housing.
●12 red LEDs for stoplight
9 V/0.9 W, current consumption = approx. 0.1 A
32 V/1.2 W, current consumption = approx. 0.04 A
e
● 12 red LEDs for taillight
9 V / 0,2 W, current consumption = approx. 0,02 A
32 V / 0,3 W, current consumption = approx. 0,01 A
034631
11785
● 12 amber LEDs für indicator
9 V / 1,2 W, current consumption = approx. 0,13 A
32 V / 2,1 W, current consumption = approx. 0,07 A
12381
LED
Combination rearlight “Lean LED” Tail-stop-indicator for horizontal or vertical surface mounting.
e
With ECE and EMC type approval.
Clear-glass lens, with 24 LEDs
Multi-voltage 9–32 V,
with 200 mm cable and 4-pin AMP plug 282 106-1
mating plug to be used AMP 282 088-1
2SD 343 910-017*
with integrated AMP plug 282 106-1 in the housing
2SD 343 910-027
035109
12393
Indicator:
12 V/1.5 W, current consumption = approx. 0.125 A
24 V/2 W, current consumption = approx. 0.08 A
Taillight:
12 V/0.5 W, current consumption = approx. 0.04 A
24 V/1 W, current consumption = approx. 0.04 A
Stoplight:
12 V/1 W, current consumption = approx. 0.08 A
24 V/1.5 W, current consumption = approx. 0.06 A
Protective rating: IP 6K9K
LED
Combination rearlight “Lean LED” Tail-stop-indicator with
reverse light for horizontal or vertical surface mounting without
ECE test
e.g. for vehicles on company or plant grounds
035793
ohne ECE-Zulassung
Multi-voltage 9-32 V
LED flasher unit to be used: 4JZ 177 846-001,
Details see page 72
2SK 343 910-037
47
Rear lighting
With patented electronics for indicator failure check. With ECE and EMC
type approval.
2SD 343 390-401*
2SD 343 390-407*
Rear lighting
LED
Clearance light*
for horizontal surface-mounting, 2 LEDs, 12 V
Seal and cable 5,000 mm long
0302
LED
Type approval
ECE SAE
(USA)
2TM 964 295-101*
X X
12 V / 0.5 W, current consumption = approx. 0.04 A
Clearance light*
for horizontal or vertical surface-mounting,
with reflector, 12 V,
2 holes for fastening screws B 4.2
500 mm cable
2TM 008 645-081*
5.000 mm cable
2TM 008 645-091*
12 V / 0.6 W, current consumption = approx. 0.05 A
With ECE approval
1395
1398
LED
* With horizontal surface-mounting the LED field must point
to the outer vehicle edge. With vertical surface-mounting the
LED field may point upwards or downwards.
(Clearance light can also be used as a taillight with reflector.)
Clearance light
for horizontal surface-mounting, 2 LEDs, 8-28 V
500 mm cable
2XA 959 560-401*
5.000 mm cable
2XA 959 560-411*
12 V / 0.5 W, current consumption = approx. 0.04 A
With ECE and EMC type approval.
7574
e
031721
LED
Clearance light
for horizontal flush-fitting, 8-28 V
500 mm cable
2XA 959 610-401*
5.000 mm cable
2XA 959 610-411*
12 V / 0.5 W, current consumption = approx. 0.04 A
With ECE and EMC type approval.
0531
48
Rear lighting
LED
7715
Safety stoplight
for horizontal surface-mounting,
with 12 red LEDs, in brilliant finish with 3D effect
due to each LED being embedded in a separate reflector,
with 200 mm cable
red lens
2DA 343 800-007*
with rubber base
2DA 343 800-057*
12 V / 1.8 W, current consumption = approx. 0.15 A
Safety stoplight in combination with rear view camera,
see page 62
LED
7547
for horizontal flush-fitting,
with 12 red LEDs and connected supply cable
red lens
2DA 959 071-537*
clear-glass lens
2DA 959 071-037*
12 V / 2 W, current consumption = approx. 0.17 A
LED
Safety stoplight
for horizontal or vertical surface-mounting,
with 10 red LEDs, with 3000 mm cable, installed height 9 mm
red lens
7696
with screw attachment
2DA 343 106-007*
self-adhesive (for smooth and clean surfaces)
2DA 343 106-207*
12 V / 0.7 W, current consumption = approx. 0.06 A
with smoked glass lens
with screw attachment
7696
2DA 343 106-021*
self-adhesive (for smooth and clean surfaces)
2DA 343 106-221*
12 V / 0.7 W, current consumption = approx. 0.06 A
Safety stoplight
for horizontal flush-fitting, with pre-fitted 12 V bulbs
red lens
02799
with PE foam seal coated with adhesive on both sides
2DA 008 136-027
Screw attachment from the front through the windscreen
(screws are not included)
2DA 008 136-017
49
Rear lighting
Safety stoplight
Rear lighting
Safety stoplight
for horizontal surface-mounting, with 12 V bulbs
2DA 008 136-031
Accessories (order separately):
02799
Cable with grommet
Cable without grommet
Grommet only
8KA 146 751-007
8KA 144 707-007
9GT 146 757-007
Reflector
with 2 holes for fastening screws
red
self-adhesive
red
8RA 343 220-017
8RA 343 220-007
023191
Reflector
2 holes, Ø 6 mm, for fastening screws
red
8RA 002 020-001
02346
Reflector
self-adhesive
red
amber
white
8RA 002 014-081
8RA 002 014-101
8RA 002 014-091
023535
Reflector
self-adhesive
red
amber
white
8RA 003 326-031
8RA 003 326-041
8RA 003 326-051
0292031
Reflector
3190
50
for horizontal or vertical surface-mounting,
self-adhesive
red
8RA 343 160-007
amber
8RA 343 160-027
white
8RA 343 160-017
Rear lighting
LED
Licence plate light
for surface mounting on the left and right next to the licence
plate light 520 x 120 mm, with 2.5 m cable, bracket for fitting
the light to the body, cover, attachment screws, cover caps
for screws as well as a spacer for different surface mounting
situation,
Multi-voltage 10–33 V; with 2 LEDs 0.5 W
With ECE and EMC type approval.
4068
2KA 959 640-607*
12 V/0.55 W, current consumption = approx. 0.04 A
031721
LED
Licence plate light for surface mounting on the right
or left next to the licence plate (520 x 120 mm) Only
1 light necessary for illumination.
CE-tested. With ECE and GGVS/ADR type approval.
Clear-glass lens, with 4 LEDs, housing made of black
plastic.
With blade terminal 6.3 x 0.8
2609
24 V/1 W, current consumption - approx. 0.04 A
2KA 010 278-021*
12 V/1 W, current consumption - approx. 0.08 A
2KA 010 278-321*
24 V with 500 mm cable and 2-pin EasyConn plug
2KA 010 278-051*
24 V with 2000 mm cable and blade terminal 6.3 x 0.8
2KA 010 278-031*
24 V with 500 mm cable and Quick Link connector
2KA 010 278-041*
LED
Licence plate light for flush mounting above the
licence plate (520 x 120 mm) 2 lights required for
illuminating the licence plate.
With blade terminal 6.3 x 0.8, with black plastic frame CEtested. With ECE and GGVS/ADR type approval.
24 V/1 W, current consumption - approx. 0.04 A
2KA 010 278-011*
12 V/1 W, current consumption - approx. 0.08 A
2KA 010 278-311*
2609
51
Rear lighting
e
clear-glass lens, black housing
Rear lighting
A new law governing the lighting equipment on newly registered trucks and trailers came into effect in July 2006 (legislation also
applies for conversion or retrofitting)¬
A total of four reversing spotlights are permitted: Two reversing spotlights on the rear and one each on the sides. This is the equation for
optimum illumination when manoeuvring in reverse.
Variant A: Two additional reversing spotlights on the rear.
Variant B: One additional reversing spotlight per side.
Variant C: Two additional reversing spotlights on the rear plus one additional reversing spotlight on each side.
Reversing spotlight with clear lens
for surface mounting at the rear or on the side, pendant or
upright. With 24 V H3 bulb and AMP connection. Protective
rating IP 6K4K and IPX9K.
2ZR 996 506-501
12 23006
Reversing spotlight
for surface mounting at the rear or on the side, pendant or
upright. With 24 V H3 bulb and AMP connection. Protective
rating IP 6K4K and IPX9K.
2ZR 997 506-391
23005
Reversing spotlight
23262
52
for surface mounting at the rear or on the side, pendant or
upright. With 24 V P21W bulb. Bulb accessible from the
¬outside without tools. With 200 mm connection cable. Protective rating IP 5K9K.
2ZR 996 179-701
Beacons
HALOGEN
Rota Compact
Lights with amber impact-proof and especially sturdy, smooth
dome made of polycarbonate with interior longitudinal pattern. Single belt drive and upright H1 bulb. 180 rpm, total
current consumption 5 A, EMC compatibility: e1 034277,
resistant to ¬high-pressure jet cleaners.
TA1
002075
ECE-R65, SAE J575, SAE J595, SAE J845
12V, flexible pipe-socket-mounting
24V, flexible pipe-socket-mounting
12V, feste pipe-socket-mounting
24V, feste pipe-socket-mounting
12V, direct surface mounting
´24V, direct surface mounting
12V, magnetic attachment
24V, magnetic attachment
2RL 009 506-001
2RL 009 506-011
2RL 009 506-101
2RL 009 506-111
2RL 009 506-201
2RL 009 506-211
2RL 009 506-301
2RL 009 506-311
KL Rotaflex FL
According to DIN 14 620 Form A
H1 rotating beacon with black housing base and flexible
pipe-socket mounting for socket pipe, maximum inclination
90°. With bulb, total power consumption 12V 55W = 5.5A,
24V 70W = 3.5 A. Interference suppression CISPR 25, Class
5 (conducted), resistant to high-pressure jet cleaners.
12V
24V
2RL 006 846-001
2RL 006 846-011
Beacons
6509 amber
KL Junior Plus FL
According to DIN 14 620 Form A
H1 rotating beacon with amber housing base and flexible¬
pipe-socket mounting for socket pipe, max. inclination 90°,
with bulb, total current consumption 12V 55W = 5A, 24V
70W = 3 A. Interference suppression CISPR 25, Class¬ 3
(conducted), resistant to high-pressure jet cleaners.
12V
24V
2RL 008 967-001
2RL 008 967-011
1419 amber
XENON
1765 amber
KLX Junior Plus FL
According to DIN 14 620 Form A
Electronic flashing beacon with amber housing base and flexible pipe-socket mounting for socket pipe, maximum inclination 90°. With built-in Xenon tube (gas discharge¬ lamp)
with plug-type base. Total power consumption at 12V 3.3A,
at 24V 1.7A. Flashing frequency 2.0 Hz = Double flashes.
Interference ¬suppression CISPR 25, Class 3 (conducted),
resistant to high-pressure jet cleaners.
12V
2XD 009 052-001
24V
2XD 009 052-011
53
Beacons
KLX 7000 FL
According to DIN 14 620 Form A
Electronic flashing beacon with silver-coloured metal housing¬ and flexible pipe-socket mounting for socket pipe¬,
max. inclination 90°. With built-in Xenon tube (gas discharge¬
lamp) with plug-type base. Total power consumption at 12V
3.3A, at 24V 1.6A. Flashing frequency 2.05 Hz = Double flashes. Interference suppression CISPR 25, Class 5 (conducted), resistant to high-pressure jet cleaners.
1399 amber
12 V
24 V
LED
2RL 008 183-101
2RL 008 183-111
K-LED FO
ECE-certified LED beacon, clear-glass dome with Fresnel
pattern. Flat and compact design, different surface¬ mounting versions for every application, multi-voltage 9 – 32 V. 8
flashing frequencies, power consumption 20W, interference
suppression: CISPR25, Class 3 (conducted),
TA1
Fixed attachment
2XD 010 311-001
Pipe-socket attachment
2XD 001 311-011
Magnetic attachment with cigarette lighter
and spiral cable 2.5 m, extendable
2XD 001 311-021
002738
(for single and double flash)
Pipe socket mounting
Once the vehicle has arrived at the field, the
beacon can be removed and the worklight inserted instead.
54
Beacons
Beacons without ECE test approval
XENON
KLX1
Compact Xenon beacon with an impact-resistant dome
made of polycarbonate, in amber or red. Special Fresnel
pattern for particularly homogeneous and symmetrical light
distribution, multi-voltage (9-92 V), power consumption 4 W,
flash rate¬ 70 ± 15 flashes / minute. Tests: CE, UL 582 and
EMC compatibility e11 0320891
Fixed attachment
2XD 009 224-001
Magnetic attachment (cable length 440 cm) 2XD 009 224-101
Fixed attachment
2XD 009 224-01
Magnetic attachment (cable length 440 cm) 2XD 009 224-11
TA1
002738
(for single and double flash)
LED flashing beacon NAVILED 360°
for surface mounting
10 different flashing frequencies can be programmed, with one
LED, inc. 2500 mm connection cable, multi-voltage: 9V – 33V,
attachment with 3 screws, power consumption less than 5W
2XD 980 911-601
Beacons
Amber light colour
Further light colours on request.
LED flashing beacon
For flush mounting (e.g. in the vehicle front-end)
10 different flashing frequencies can be programmed,
With 12 LEDs, 3 W, inc. 2500 mm connection cable
Multi-voltage: 9V – 33V
Current consumption: approx. 0.13A at 12/24V
Amber light colour
2XD 959 011-021
Further light colours on request.
Information for all LED products:
The several functions of the lamps have to be provided with a locking feature of 3 A maximum .
55
Warning lights (according to SAE)
Warning light “Oval”
Tested according to SAE 974, suitable for horizontal and vertical ¬flush and surface mounting, right or left, with 4-pin
Deutsch plug, mating plug to be used DT 06-4S,
Surface mounting, 12 V
Flush mounting, 12 V
2XW 343 130-197
2XW 343 130-211
Warning light “Oval”
Tested according to SAE J 974, for surface mounting at the
side, inc. harness and 12 V / 21 W bulb
left
right
2XW 343 130-437
2XW 343 130-447
Warning light „Oval“
Tested according to SAE J 974, surface mounting, inc. harness 140 mm and 12 V / 21 W bulb
Left, grommet facing upwards
Right, grommet facing downwards
Information for all LED products:
The several functions of the lamps have to be provided with a locking feature of 3 A maximum .
56
2XW 343 130-097
2XW 343 130-107
Side lighting
LED
innovative side marker light
for horizontal and vertical flush-mounting, ECE approval (SAE
if required)
with 6,3 mm contact
12 V
24 V
2PS 343 690-001
2PS 343 690-011
with 500 mm open-ended line
12 V
2PS 343 690-201
Side marker light
for horizontal flush-fitting, with reflector,
with seal, with 12 V bulb
ECE and SAE approval
12 V / 5 W
2PS 964 295-001
Red SMLR according to SAE, see page 44
9807
Side marker light
12 V / 3 W
2PS 962 964-037
0004, 3153
Seal (Please order separately)
9GD 963 281-001
Grommet (Please order separately)
9GT 963 129-001
LED
Side marker light
for horizontal or vertical surface-mounting, with 2 LEDs,
with reflector, with cable 195 mm long,
with double-sided adhesive tape on the base plate and
“adapter cam”
2PS 009 226-027*
12 V / 0.5 W, current consumption = approx. 0.04 A
10236
Information for all LED products:
The several functions of the lamps have to be provided with a locking feature of 3 A maximum .
57
Side lighting
fot horizontal or vertical flush-fitting, with reflector, with 12 V
biulb, with white base plate
ECE and SAE approval
Side lighting
For vehicles < 6 m in length and/or < 3.5 t in
weight, Category 5 auxiliary indicators are
mandatory, and for vehicles > 6 m in length
and/or > 3.5 t in weight, Category 6 auxiliary
indicators are mandatory.
LED
Side marker light
with reflector, with LED technology,
with two-wire cable 1,500 mm long
for horizontal surface-mounting
2PS 008 645-011*
12 V / 0.6 W, current consumption = approx. 0.05 A
1395, 1396
for vertical surface-mounting
2PS 008 645-031*
12 V / 0.6 W, current consumption = approx. 0.05 A
Rubber seal (please order separately)
55 pieces
9GD 157 876-007
1397
Red SMLR according to SAE, see page 45
LED
9110
Side marker lights set
Category SM2, for horizontal flush-fitting,
for retrofitting to passenger cars < 6 m,
Type approval
4 units each, with LED technology
ECE SAE
Lenses amber, trim silver-grey
(USA)
2PS 008 138-801*
X
X
Lenses grey, trim black
2PS 008 138-821*
X
X
Lenses grey, trim silver-grey
2PS 008 138-811*
X
X
12 V / 0.7 W, current consumption = approx. 0.06 A
Side marker lights set
1223
LED
1423
Category SM2,
for horizontal and vertical flush-fitting,
4 units each
with amber 12 V/5 W bulb
arrow design
2PS 008 541-801
Auxiliary indicator
Category 5, for horizontal flush-fitting, in LED technology,
straightforward adhesive mounting
in prepared mirror, can also be used
Type approval
as a universal auxiliary indicator
ECE SAE
(USA)
2BM 008 771-007*
X
X
12 V / 0.7 W, current consumption = approx. 0.06 A
Information for all LED products:
The several functions of the lamps have to be provided with a locking feature of 3 A maximum .
58
Type approval
ECE SAE
(USA)
X
Interior lighting
Round LED spot
Voltage: multi-volt 10–31 V
Crystal clear lens
1 white power LED
Installation:
choose between screw and spring-assisted mounting
Spot power consumption at 12 V / 2.5 W approx. 0.18 A
Flush-mounting, fixed
Colour of cover*
● white
2JA 344 040-701
● black
2JA 344 040-711
● silver
2JA 344 040-721
● gold, available from 2nd quarter of 2009
2JA 344 040-731
Flush-mounting, adjustable
Colour of cover*
● white
2JA 343 790-301
● black
2JA 343 790-311
● silver
2JA 343 790-341
● gold, available from 2nd quarter of 2009
2JA 343 790-351
Round LED spot
Very low profile,
also suitable for flush-mounting,
separate control unit required for installation
Surface-mounting, fixed
All models available from 2nd quarter of 2009
Colour of cover*
● white
2JA 344 190-001
● black
2JA 344 190-011
● silver
2JA 344 190-021
● gold
2JA 344 190-031
* other colours (e. g. natural wood look) or ambient Celis®
light-transmitter ring (e. g. blue, red) available upon request
59
Interior lighting
LED
Interior lighting
Interior light “SpotLED” adjustable, for flush mounting.
With 1 white LED, adjustable Spot (20°), electrical connection
through a cable 200 mm long, Multi-voltage 9–31 V, narrow
illumination. With blue ambient CELIS® ring with screw or
spring attachment
White trim
2JA 343 700-071
Black trim
2JA 343 700-271
Spot
12 V/2.5 W, current consumption = approx. 0.21 A
24 V/2.5 W, current consumption = approx. 0.10 A
Ambient CELIS® ring
12 V/0.5 W, current consumption = approx. 0.04 A
24 V/0.5 W, current consumption = approx. 0.02 A
Without CELIS® ring, with white cover trims and screw
attachment.
2JA 343 700-051
With red ambient CELIS® ring, with black cover trims and
screw attachment.
2JA 343 700-167
With blue ambient CELIS® ring, with black cover trims; with
screw and spring attachment.
2JA 343 700-271
Interior light “Spot LED” fixed, for flush mounting.
1 white LED, housing black, lens clear with matt edge. electrical connection through a cable 200 mm long, Multi-voltage
9–31 V. Narrow illumination. Change between white functional
lighting and ambient night design (CELIS® ring) possible.
IP69, temperature range –40 °C to +60 °C
Spot
12 V/2.5 W, current consumption = approx. 0.21 A
24 V/2.5 W, current consumption = approx. 0.10 A
Ambient CELIS® ring
12V/0.5 W, current consumption = approx. 0.04 A
24V/0.5 W, current consumption = approx. 0.02 A
With red ambient CELIS® ring, with white cover trims and
screw attachment.
2JA 343 680-067
With blue ambient CELIS® ring, with grey cover trims, screw
and spring attachment.
2JA 343 680-127
60
Interior lighting
Reading light
Surface-mounting, flexible arm
1 white LED, patterned lens, electrical connection by 115 mm
lead, multi-volt 9–31 V, narrow illumination, perfect for reading
maps12 V / 2.5 W, power consumption approx. 0.20 A
Black cover*
Flexible, adjustable arm
150 mm
400 mm
2JA 343 720-021
2JA 343 720-121
White cover*
Flexible, adjustable arm
150 mm
400 mm
2JA 343 720-011
2JA 343 720-111
* other colours available upon request
Reading light
Reading spotlights
Powerful, non-glare light source with flexible metal arm,
with holder for permanent mounting,
including 12 V / 5 W halogen bulb
Permanent attachment
500 mm long
Permanent attachment
195 mm long
Cigarette lighter adapter
160 mm long
2AB 004 532-001
2AB 004 532-011
2AB 004 532-021
61
Interior lighting
LED
Interior lighting
LED
EuroLED
Surface-mounting
Cast in one piece with the base plate, 1 white LED,
clear lens, electrical connection through a cable 2,500 mm
long, multi-volt 9 – 33 V
12 V / 2.5 W, current consumption = approx. 0.21 A
2JA 959 820-501
LED
EuroLED Touch
Surface-mounting
Cast in one piece with the base plate, 1 white and 8 red LEDs,
clear lens, electrical connection through a cable 2,500 mm
long, multi-volt 9 – 33 V, with sensitive switch,
for switching on/off and dimming and changing between white
and red light
12 V / 3 W, current consumption = approx. 0.25 A
black cover trim
2JA 959 950-031
white cover trim
2JA 959 950-041
LED
DuraLED
Surface-mounting
Cast in one piece with white base plate, 36 white LEDs,
clear-glass lens and white housing,
electrical connection through a cable 2,500 mm long,
multi-volt 9 – 33 V, wide horizontal and narrow vertical
illumination
12 V / 9 W, current consumption = approx. 0.75 A
2JA 959 037-511
LED
140
32
65
DuraLED Plus
Surface-mounting
White high brightness LED lamp, white housing, electrical
connection through a cable 2500 mm long,
Multivolt 9 - 33 V
12 V/9 W, current consumption = approx. 0,25 A
24 V/9 W, current consumption = approx. 0,13 A
2JA 959 700-101
62
Interior lighting
Flush-fitting
6 W bulb, broad illumination, warm white light,
transparent lens, black housing,
connection through blade connector, screw or
snap-on attachment possible, IP 3,
temperature range –40 °C to +60 °C
12 V / 6 W, current consumption = approx. 0.5 A
Bulb
2JA 009 294-001
reading spotlight, narrow illumination
2JA 009 294-021
LED
Mini OvalLED
Flush-fitting
4 white LEDs, 1 red LED, brilliant-finish clear lens,
black housing, ambient lighting can be switched on in addition,
illumination for the driver or instrument panel area at the side,
IP 69, temperature range -40 °C to +60 °C
12 V / 6 W, current consumption = approx. 0.46 A
blue ambient, without frame and switch
Premium G-LED
2JA 343 570-117
Standard E-LED
2JA 343 570-137
blue ambient, with frame and switch
Premium G-LED
2JA 343 570-157
Standard E-LED
2JA 343 570-177
red ambient, without frame and switch
Premium G-LED
2JA 343 570-017
Standard E-LED
Premium G-LED
2JA 343 570-057
LED
Mini ThinLED
Surface-mounting
Cast in one piece with the grey base plate,
clear lens, electrical connection through a cable 170 mm
long, broad illumination at close range, IP 69,
temperature range –40 °C to +60 °C
12 V / 0.7 W, current consumption = approx. 0.06 A
5 white LEDs
3 white LEDs
3 blue LEDs
3 green LEDs
2JA 343 660-101
2JA 343 660-007
2JA 343 660-027
2JA 343 660-061
63
Interior lighting
2JA 343 570-031
red ambient, with frame and switch
Interior lighting
Surface mount version
Halogen bulbs, movable spotlight, clear lens, with 500 mm
cable, switch and grey housing
Spot
12 V/10 W, current consumption = approx. 0.83 A
Bulb
12 V / 21 W, current consumption 12 V = approx. 1.75 A
2JA 009 037-017
LED
Flush mount version
12 LEDs, clear lens
12 V/1.8 W, current consumption = approx. 0.15 A
white LEDs
2PF 008 405-061
blue LEDs
2JA 008 405-081
LED
CargoLED
flush mounting
4 white LEDs, clear-glass lens and aluminium flush-mounted
¬frame, electrical connection through a cable 310 mm long
with stripped cable ends, multi-voltage 9 – 31 V, broader illumination at close range, ADR/GGVS tested, IP 69, temperature range –40 °C to +60 °C
12 V / 6 W, current consumption = approx. 0.46 A
white functional lighting
2JB 343 227-001
ambient functional lighting
2JB 343 227-047
Time-delay relay
Door contact relay with 7 sec. time delay with subsequent
dimming. Suitable for all interior lights with bulbs or LEDs.
Max. capacity
50W, CE tested, 12 V, 24 V on request
12 V
24 V
64
5HE 010 313-001
on request
Interior lighting
LED
Step light
Flush-fitting, emergency and night-lighting
2 LEDs, clear-glass lens, seal, attachment screws¬ and screw caps, dust and waterproof, with inverse polarity protection, multi-voltage 10 – 33 V 12 V / 0.35 W, current consumption = approx. 0.03 A
white LEDs
Electrical connection through a cable 120 mm long
2XT 959 510-427
electrical connection through a cable 150 mm long and 2-pin
Packard plug
2XT 959 510-467
blue LEDs
Electrical connection through a cable 120 mm long
2XT 959 510-657
LED
Step light
flush fitting
1 LED, clear-glass lens, electrical connection through a potted cable 100 mm long, cover cap white, seal, attachment
either with 2 screws or snap-on attachment, broad illumination at close ¬range, 12 V / 0.5 W, current consumption =
approx. 0.04 A
white LEDs
2JA 998 560-017
blue LEDs
2JA 998 560-057
Step light
Flush-fitting, cockpit or map-reading light,
emergency and night-lighting
4 LEDs, clear-glass lens, with white ring for covering¬ the 3
attachment screws, with 120 mm cable, seal with attachment
screws, dust and waterproof¬, with inverse polarity protection, multi-voltage 10– 33 V
12 V / 0.7 W, current consumption = approx. 0.06 A
white LEDs
2XT 959 500-677
blue LEDs
2XT 959 500-207
Step light
Flush-fitting, cockpit or map-reading light,
Emergency and night-lighting
4 LEDs, clear-glass lens, with frame for covering the 3 attachment screws, with cable 120 mm long, dust and waterproof,
12 V / 0.7 W, current consumption = approx. 0.06 A
blue LEDs, white cover frame
12 V
2XT 980 582-251
white LEDs, black cover frame
12 V
2XT 980 580-241
Accessories for surface mounting installation
Adapter white
8HG 959 993-542
Adapter black
8HG 959 993-602
65
Interior lighting
LED
Interior lighting
LED
Step light
Surface-mounting
Cast in one piece with the grey base plate,
10 white LEDs, clear lens, grey cover caps,
electrical connection through a cable 500 mm long,
broad illumination at close range, IP 69,
temperature range – 40 °C to + 60 °C
12 V / 1.8 W, current consumption = approx. 0.15 A
2JA 343 606-007
LED
Step light
Surface-mounting
welded to base plate, clear-glass lens,
grey housing, for horizontal or vertical surface-mounting,
electrical connection through blade connector and grommet
12 V / 1.8 W, current consumption = approx. 0.12 A
2 white LEDs
with prism rod as light aperture body
2JA 008 078-031
2 blue LEDs
with prism rod as light aperture body
2JA 008 078-021
LED
Step light
Flush-fitting
Cast in one piece, 10 white LEDs, clear-glass lens,
cable 2,500 mm long, with screws, screw caps,
seal and cable clips
12 V / 2 W, current consumption = approx. 0.17 A
2JA 959 073-001
66
Interior lighting
Flush mount interior
light with switch
Bulb, switch with 3 functions (on/off/door), installation depth
23 mm, electrical connection through harness 150 mm long
with AMP plug, attachment with snap hooks or 2 screws,
12V / 10 W, current consumption approx. 0.84 A
Clear housing
Black housing
2JA 964 916-007
2JA 964 916-017
Flush mount reading
light with switch
inc. orange bulb, clear-glass lens, electrical connection
through harness 150 mm long with AMP-plug, adjustable
light head, attachment with snap hooks, 12V / 5W, current
consumption approx. 0.42 A
Grey housing
Black housing
2AB 004 074-057
2AB 004 074-077
Flush mount
reading light
Bulb, clear-glass lens, black housing, electrical connection
through two cables 120 mm long, adjustable light head
12 V/5 W, current consumption = approx. 0.42 A
Interior lighting
2AB 004 074-027
67
Electrics/Electronics
Rear view camera system RVS-1
... see what’s behind
■ Minimum dimensions
(W x H x D with hoop: 56 x 47 x 38 mm)
■ Is activated automatically when the vehicle is
put into reverse gear
■ Extremely large visible range: 92° vertical and
120° horizontal
■ High night vision ability
■ Extremely resistant to vibrations
■ High temperature resistance: -40° to +85° C
■ Variable surface-mounting possibilities
(e. g. to tailgates, spoilers, handles)
■ Compact TFT monitor with diagonal screen
size 12.6 cm.
Also suitable for connection to other video
sources (DVD, DVB-T etc.).
Viewing of back postion
e.g. harvester-thresher
■ High-quality, digital image recording:
1/3-inch CMOS with 250,000 Pixels
■ In many cases, the camera can also be
connected to a display already mounted in
the vehicle.
■ Image signal: NTSC
■ All the components comply with the high
quality requirements of the automotive industry.
Rear view camera system RVS-1
Scope of supply: High-quality rear view camera RVC-1,
incl. 5 inch TFT monitor in absolutely top quality
10 m professional harness and installation material. *
5BD 009 690-001
Monitor: e1 034873
Rear view camera RVC-1
incl. installation material
5BD 166 175-001
Camera: e1 034874
* Optionally available:
Cinch cable adapter
for camera
for monitor
8KB 169 080-001
8KB 169 079-001
10 m supplementary harness
8KB 166 530-001
Installation housing for
RVC-1 solo
9BG 169 974-001
RVC-1 in combination with CHMSL
9BG 169 975-001
68
Electrics/Electronics
New generation of modular switches: Microswitches
Benefits
■ Enhanced power efficiency:
The increasing number of electronic control components puts a large
strain on the vehicles’ power system. Since it is very costly to supply the
required power, there is a noticeable trend towards very low control currents
which still need to be reliably switched.
Our solution: a system of snap-action friction switches and chosen pairs of
mating contacts. The standard AgNi version reliably makes or breaks
contacts under as low as mA loads.
Particularly efficient Power LEDs are another means of reducing power
requirements by up to 70% per switch compared to previous switch ranges.
■ Maintenance-free:
Operators expect the switch to work reliably and without maintenance
throughout the vehicle’s entire life cycle. Key influencing parameters
are the expected life (cycles) of the contacts and the expected life of
the light source.
We provide our customers with our particularly wear-resistant
“Microswitch System”. Its snap-action friction switch minimises wear
and contamination of contact faces with every flick of the switch. The
average expected life of each LED is 100,000 h.
Technical data
Symbol type
Life
Impermeability
Op. temperature
Storage temp.
Dashboard depth
Accessories
PC white, painted
PA black
3 mm Junior Power Timer
max. 4 LEDs: 2x orientation lighting, green
2x functional lighting, red
lasered
5mA / 24V resistive, 500,000 cycles
10A / 24V resistive, 80,000 cycles
4A / 24V lamp, 90,000 cycles
5A / 24V inductive, 270,000 cycles
IP30
-35 °C ... +85 °C
-40 °C ... +100 °C
2 mm (direct installation)
49+(n-2)*24,4
Electrics/Electronics
Material, rocker
Material, base
Terminal contacts
Light source
• Single mounting frame: 9AR 168 396-001/-007
• Modular mounting frame:
End frame, left: 9AR 169 209-001/-007
Middle frame: 9AR 169 208-001/-007
End frame, right: 9AR 169 210-001/-007
• Connector skirt: 8JD 010 076-001/-007
For further information and details on ordering, please follow the link www.hella.de/modulschalter or
www.hella.com/rockerswitch or refer to Hella’s Electrics Main Catalogue
69
Electrics/Electronics
Relay without bracket - S2
1
Relay with bracket - S2
2
Relay without bracket - S1
3
86
87a
85
30
24
26.1
11
87
13.5
16
4
86
85
24
30
40
26.1
87a
6.5
Relay with bracket - S1
11
87
High-power make contact relay / Battery cut-off relay
3
Plug matrices
A
B
B 1
B 2
Switching matrices
B 3
S 1
S 2
S 6
S 8
Plug matrices acc. to ISO 7588 / Blade connectors acc. to ISO 8092
70
S 3
S 4
Sim
dra plif
win ied
g
Plu
gm
atr
ix
Sw
i
t
ma ch
trix ing
Co
res il
ist
an
ce
Pa
res ralle
ist l
an
ce
Pa
ral
lel
dio
de
Co
n
res tac
ist t
an
ce
Electrics/Electronics
Contacts
Make
contact (87)
Break
contact (87a)
Make
contact (87)
Break
contact (87a)
Make
contact (87)
Break
contact (87a)
Nominal
switching
current
(A)
Nominal
switching
current
(A)
Nominal
switching
current
(A)
Nominal
switching
current
(A)
Nominal
switching
current
(A)
Nominal
switching
current
(A)
No. of
switchings
(thous.)
No. of
switchings
(thous.)
No. of
switchings
(thous.)
No. of
switchings
(thous.)
No. of
switchings
(thous.)
No. of
switchings
(thous.)
mV/10A
Pack. Part number
1N 4005
Light load
Ohm
Inductive load
Ohm
Current Ohmic load
appl. (A)
12 V
40
30
100
-
-
30
100
-
-
30
150
-
-
1
B
S1
85
470
-
50
E
4RA 007 791-011
40
30
100
-
-
30
100
-
-
30
150
-
-
3
B
S1
85
470
-
50
E
4RA 007 791-021
50
50
100
-
-
50
100
-
-
50
100
-
-
1
B3
S1
100 470
-
50
E
4RA 007 793-031
50
50
100
-
-
50
100
-
-
50
100
-
-
3
B3
S1
100 470
-
50
E
4RA 007 793-041
40
30
100
-
-
25
100
-
-
16
100
-
-
4
A
S2
85
-
-
50
E
4RA 003 510-081
40
30
100
-
-
25
100
-
-
16
100
-
-
4
B2
S6
85
-
-
50
E
4RA 003 510-261
40
30
100
-
-
25
100
-
-
16
100
-
-
2
B
S2
85
-
-
50
E
4RA 003 510-111
40
30
100
-
-
25
100
-
-
16
100
-
-
2
B2
S6
85
-
-
50
E
4RA 003 510-131
40
30
100
-
-
25
100
-
-
16
100
-
-
4**
B2
S8
85
-
X
50
E
4RA 940 010-671
60
70 100
-
-
50
100
-
-
20
50
-
-
5
B
S2
85
-
-
50
E
4RA 003 437-041
60
70 100
-
-
50
100
-
-
20
50
-
-
5
B
S2
85
-
-
50
I
4RA 003 437-047
60
70 100
-
-
50
100
-
-
20
50
-
-
5
B
S9
85
-
-
50
E
4RA 003 437-061
I = Industrial packaging
Changeover contacts
Pack. Part number
Make
contact (87)
Break
contact (87a)
Make
contact (87)
Break
contact (87a)
Make
contact (87)
Break
contact (87a)
Nominal
switching
current
(A)
Nominal
switching
current
(A)
Nominal
switching
current
(A)
Nominal
switching
current
(A)
Nominal
switching
current
(A)
No. of
switchings
(thous.)
Nominal
switching
current
(A)
No. of
switchings
(thous.)
No. of
switchings
(thous.)
No. of
switchings
(thous.)
No. of
switchings
(thous.)
No. of
switchings
(thous.)
mV/10A
Light load
1N 4005
Inductive load
Ohm
Current Ohmic load
appl. (A)
Ohm
E = Individual packaging
Sim
dra plif
win ied
g
Plu
gm
atr
ix
Sw
i
t
ma ch
trix ing
Co
res il
ist
an
ce
Pa
res ralle
ist l
an
ce
Pa
ral
lel
dio
Co
de
n
res tac
ist t
an
ce
** Housing turned through 180°
12 V
100
20
100
30
100
20
100
30
150
20
150
1
B1
S4
85
470
-
40/20 30
100
20
100
30
100
20
100
30
150
20
150
3
B1
S4
85
470
40/20 30
100
20
100
25
100
16
100
16
100
8
100
4
B1
S3
85
-
40/20 30
100
20
100
25
100
16
100
16
100
8
100
2
B1
S3
85
-
-
40/20 30
100
20
100
25
100
16
100
16
100
8
100
2
B1
S5
85
-
X
-
50/
60
50/
60
50/
80
60/
80
40/
80
E
4RD 007 794-021
E
4RD 007 794-031
E
4RD 003 520-081
E
4RD 003 520-131
E
4RD 003 520-251
Electrics/Electronics
40/20 30
Our relay catalogue contains additional relays with
detailed information.
The range includes:
■ Micro relays
■ Special relays
■ Skirted relays
■ Solid-state relays
71
Electrics/Electronics
Flasher unit ISO 12 V
Voltage range: 9 – 16 V
power consumption (standby): < 1mA
Temperature range: –40°C - +85°C
Protective rating: IP66
Max. load: 8x 21 W + 5x 1.2 W
4DN 009 508 027
Flasher unit NASO 12 V
Voltage range: 9 – 16 V
Power consumption (standby): < 1mA
Temperature range: –40°C - +85°C
Protective rating: IP66
Max. load: 7 x 21 W + 5 x 1.2 W + 4 x 1.2 W
4DN 009 508 017
Flasher unit 12 V
(2 + 1 +1) x 21 W or (2 + 1 + 1 + 1 ) x 21 W warning signal 8x
21W or 10 x 21W, check 1.2 ...2 W
Temperature range: –40°C - +85°C
4DN 996 173-007
with bracket
4DN 996 173-017
Flasher unit without ECE approval
without failure check circuit,
suitable for LED combination rearlight “Lean LED” part
number 2SK 343 910-037
Multi-voltage 9 – 33 V
Temperature range: –40°C - +85°C
Max. load: 42 W
4JZ 177 846-007
72
Electrics/Electronics
Time relay 12 V
Drop-out delay 40 sec.
Switching current: on 10 A, off 20 A
Temperature range: –25°C - +80°C
Protective rating: IP53, contact IP20
5HE 996 152-007
Time relay 12 V
Drop-out delay 10 sec.
Switching current: on 10 A, off 20 A
Temperature range: –25°C - +80°C
Protective rating: IP53, contact IP20
5HE 996 152-017
Time relay 12 V
Drop-out delay - adjustable from 0 – 900 sec.
Switching current: on 10 A, off 20 A
Temperature range: –20°C - +80°C
Protective rating: IP50, contact IP20
5HE 996 152-027
Time relay 24 V
Drop-out delay adjustable from 0 – 900 sec.
Switching current: on 10 A, off 20 A
Temperature range: –20°C - +80°C
Protective rating: IP50, contact IP20
5HE 996 152-037
Time relay 12 V
On-delay adjustable from 0 – 900 sec.
Switching current: on 10 A, off 20 A
Temperature range: –20°C - +80°C
Protective rating: IP50, contact IP20
5HE 996 152-047
Time relay 24 V
On-delay adjustable from 0 – 900 sec.
Switching current: on 10 A, off 20 A
Temperature range: –20°C - +80°C
Protective rating: IP50, contact IP20
5HE 996 152-057
On-out delay 7.5 sec.
Switching current: on 10 A, off 20 A
Temperature range: –25°C - +80°C
Protective rating: IP53, contact IP20
5HE 996 152-067
Time relay 12 V
Drop-out delay 7.5 sec.
Switching current: on 10 A, off 20 A
Temperature range: –25°C - +80°C
Protective rating: IP53, contact IP20
5HE 996 152-077
73
Electrics/Electronics
Time relay 12 V
Electrics/Electronics
The Hella Sensors / Actuators product range - universal, innovative and triedand-trusted millions of times over!
Thanks to its versatility, the wide range of sensors and actuators can be used wherever devices
need controlling, measuring, regulating or monitoring.
Sensors
Temperature sensors
Measurement of air and liquid temperatures
Absolute pressure sensors
Measurement of liquids and gases
Level sensors
Recording and measurement of liquid levels
Angle of position sensors
Single and double sensors (redundant measurement for
safety-related applications)
.
Pedal sensors
Upright and pendant versions
Solar sensors
Measurement of light intensity and sun radiation
Intelligent battery sensor (IBS)
Sensor for determining battery condition parameters provides
precise current, voltage and temperature values of the
¬vehicle battery, with / without display
Actuators
Electromotive actuators
Electrical locking/unlocking & tightening (medium force or
high force)
Electrical locking/unlocking, space-saving with micro-switch
(low force)
Use the electrics-electronics components online catalogue to read about new products, look at illustrations, drawings, dimensions and technical data – directly with practical search and comparison possibilities.
www.hella.com
74
Electrics/Electronics
Horn S90 12 – 24 V
Bracket on the horn for attachment screw M10, metal housing black
powder-coated, power consumption max. 3.5 A,
ECE tested, 113 dB, 350 Hz
with Deutsch plug
3AL 922 200-767
with blade connector
3AL 922 200-617
400 Hz, power consumption max. 5 A
Faston with sealing
3AL 996 156-007
Backup warning systemr 12 – 24 V
Power consumption 0.2 A,
97 dB, 1200 Hz, SAE tested
with Deutsch plug
with connection terminal
3SL 996 139-017
3SL 996 094-007
Pre-heating/starting switch - Ignition/starting switch
Rotary switch with safety lock, 2 keys with plastic cap included in the
scope of supply, can be removed in P and 0 position.
6JB 003 959-001
with reversible key and additional starter-repeat lock
6JB 003 959-011
with humidity protection
6JB 003 959-021
Electrics/Electronics
with humidity protection and additional starter-repeat lock
6JB 003 959-021
75
Electrics/Electronics
Battery circuit breaker
for flush-fitting or surface-mounting, side wall can be removed
– several switches can be connected to one another, cable
connection: 2 x M10 screws, protective rating IP 56 acc. to
DIN 40 050, Load capacity: 225 A (permanent load) at
12 V / 24 V, max. 1000 A (10 s) at 12 V / 24 V, Centre contact
(58L/7) with contact pin
Load capacity: 20 A at 12 V
6EK 002 843-071
Battery circuit breaker
max. load: 1000 A at 12 V (10 s), 500 A at 24 V (10 s)
max. permanent load: 50 A with 35 mm cable connected
Protective rating DIN 40 050, IP X 2
6EK 002 843-002
Rocker-type switch series
without illumination, with orientation lighting or with
functional lighting
6EH 007 832-…
You can find the complete switch range in the main Hella catalogue.
Door contact switch
Load capacity: 0.4 A at 12 V
6ZF 007 239-001
Socket
7-contact to ISO 1724, plastic version,
screw terminals, 12 V
8JB 001 943-003
Plug
7-pin to ISO 1724, plastic version,
screw terminals, 12 V
8JA 001 930-003
76
Electrics/Electronics
Socket
13-contact to ISO 11 446, plastic version,
screw terminals, 12 V
with rubber grommet and rubber seal in cover
8JB 005 949-001
with rear fog light switch-off
8JB 005 949-011
Plug
13-contact to ISO 11 446, plastic version,
screw terminals, with rubber grommet, 12 V
8JA 005 951-001
Super short adapter
from 13-contact socket (ISO 11 446) on towing vehicle
to 7-pin plug (ISO 11 446) on trailer, 12 V
8JA 008 969-001
Cable adapter
from 13-contact socket (ISO 11 446) on towing vehicle
to 7-pin plug (ISO 11 446) on trailer,
with 250 mm cable, 12 V
8JA 005 952-001
Miniature short adapter
Socket
2-contact acc. to ISO 4165, without cover,
6.3 mm blade terminal connections,
load capacity: max. 16 A, 6 – 24 V
8JB 001 946-072
77
Electrics/Electronics
from 7-contact socket (ISO 1724) on towing vehicle
to 13-pin plug (ISO 11 446) on trailer, 12 V
8JA 008 981-001
Electrics/Electronics
Socket
2-contact acc. to ISO 4165, with spring-loaded cover,
6.3 mm blade terminal connections,
load capacity: max. 16 A, 6 – 24 V
8JB 001 946-082
Socket
2-contact acc. to ISO 4165, with arresting cover,
6.3 mm blade terminal connections,
load capacity: max. 16 A, 6 – 24 V
8JB 001 946-092
Surface-mounted socket
2-contact acc. to ISO 4165, screw terminals,
load capacity: max. 16 A, 6 – 24 V
8JB 004 123-001
Power socket
2-contact with cover and clamping sleeve, suitable for
cigarette lighter plug, 6.3 mm blade terminal connections,
load capacity: max. 16 A, 6 – 24 V
8JB 008 023-001
Universal plug
2-contact with screwed strain relief and 8 A fuse,
suitable for cigarette lighter and standard sockets
(ISO 4165), screw connection up to 2.5 mm2, 6 – 24 V
8JA 007 589-001
Plug
2-pin acc. to ISO 4165, 6 – 24 V
8JA 002 262-001
78
Druckfehler und technische Änderungen vorbehalten.
Printed in Austria
GröbnerDruck/04.10/3.0
9Z4 990 396-011
© Hella Fahrzeugteile Austria GmbH
Hella Fahrzeugteile Austria GmbH
Target Group Agricultural, Construction and Utility Machines
A-1100 Vienna, Hebbelplatz 5
Tel.: +43 (0)1 606 89 20, Fax: +43 (0)1 606 88 50
Internet: www.hellaagro.com, E-Mail: info-ag-ce@hella.at