The 6th International Conference on Mechanical and
Electronics Engineering(ICMEE2014) and The 5th
International Conference on Electronics and
Information Engineering(ICEIE2014)
Beijing Jiaotong University, Beijing, China
August 16-17, 2014
Conference Chairs
Prof. Zhongliang Guan, Vice-President Beijing Jiaotong University, China
Organizing Committee Chairs
Prof. Shuqin Lou, Beijing Jiaotong University, China
Prof. Chunling Yang, Harbin Institute of Technology, China
Program Committee Chairs
Prof. Houjin Chen, Beijing Jiaotong University, China
Prof. Zhiming Liu, Beijing Jiaotong University, China
Prof. Yanan Yao, Beijing Jiaotong University, China
Program Committee
Prof. Fuzhen Xuan, East China University of Science and Technology, China
Prof. Hui Tian, Beijing University of Posts and Telecommunications, China
Prof. Denghua Li Beijing Information Science & Technology University
Prof. Hongyuang Yang, Beihang University
Prof. Zheng You, Tsinghua University, China
Prof. Huachun Zhou, Beijing Jiaotong University, China
Prof. Li Wang, University of Science Technology Beijing, China
Prof. Zhifeng Liu, Hefei University of Technology, China
Prof. Jianfeng Li, Shandong University, China
Prof. Yongsheng Zhao, Yanshan University, China
Prof. Fushuan Wen, South China University of Technology, China
Prof. Zhaojun Yang, Jilin University, China
Prof. Hongchao zhang, Texas Tech University, USA
Prof. Ping Xu, Shenzhen University, China
Prof. Huibin Qin, Hangzhou Dianzi University, China
Prof. Dean Zhao, Jiangsu University, China
Prof. Jeng-Shyang Pan, National Kaohsiung University of Applied Sciences, Taiwan
Prof. Dong Feng, Tianjin University, China
Dr. Tzu-Fu Chiu, Aletheia University, Taiwan, China
Prof. Yuan Xiaojie, Nankai University, China
Prof. Jun Gao, Shandong University, China
Prof. Wenxian Yu, Shanghai Jiaotong University, China
Prof. Shide Xiao, Southwest Jiaotong University, China
Prof. Chengshan Wang, Tianjin University, China
Prof. Mingzhou Liu, Hefei University of Technology, China
Prof. Minping Jia, Southeast University, China
Prof. Duoqian Miao, Tongji University, China
Prof. Feng Dong, Tianjin University, China
Prof. Yuehua Tan, Wuhan University of Technology, China
Prof. Jiuhua Xu, Nanjing University of Aeronautics and Astronautics, China
Prof. Xiaoyun Chen, Lanzhou University, China
Prof. Shiming Ji, Zhejiang University of Technology, China
Prof. Xianmin Zhang, South China University of Technology, China
Prof. Jiqing Han, Harbin Institute of Technology, China
Prof. Xu Han, Hunan University, China
Prof. Xiaofei Yang, Huazhong University of Science and Technology, China
Prof. Dunwen Zuo, Nanjing University of Aeronautics & Astronautics, China
Prof. Tieli Sun, Northeast Normal University, China
Prof. Shihong Shi, Soochow University, China
Prof. yougang yang，Northwest A&F University, China
Prof. Aixin Feng, Jiangsu University, China
Prof. Shuguang Gong, Xiangtan University, China
Dr. Chin-Shiuh Shieh, National Kaohsiung University of Applied Sciences
Prof. Zhengxin Hou, Tianjin University, China
Prof. Yuxian Gai, Harbin Institute of Technology, China
Prof. Tieliang Lu, Shandong University, China
Prof. Lizhong Xu, Yanshan University, China
Prof. Lijun Cao, Shandong University, China
Prof. Li Wang, Shandong University, China
Prof. Zhihong Yang, Shandong University, China
Prof. Jiang Han, Hefei University of Technology, China
Prof. Yongcun Guo, Anhui University of Science & Technology, China
Prof. Jianwei Liu, Beijing University of Aeronautics and Astronautics, China
Prof. Mingyan Jiang, Shandong University, China
Prof. Youxiang Duan, China University of Petroleum, China
Prof. Yuanlong Chen, Hefei University of Technology, China
Prof. Huabing Zhu, Hefei University of Technology, China
Conference Secretary
Wanying Gao, Beijing Jiaotong University, China
Keynote Speaker I
Pro. Yao Yan-An
Beijing Jiaotong University, Beijing, China
Biography
He received his B.S.E. degree in mechanical engineering from Yanshan University, China, in 1993, his
M.S.E. and Ph.D. degree in mechanical engineering from Tianjin University, China, in 1996 and 1999,
respectively. From 1999 to 2001, he was a postdoctoral research fellow at Shanghai Jiaotong University,
China. From 2008 to 2009, he was a visiting scholar at IGM, RWTH Aachen University, Germany.
Currently, he is a full professor of School of Mechanical and Electronic Control Engineering at Beijing
Jiaotong University, Beijing, China and serves as the associate head of the department of Mechanical
Engineering and the deputy director of the Ministry of Education Key Laboratory of Automobile
Advanced Manufacturing && Measurement and Control Technology. He is also a researcher of the United
Nations Educational, Scientific and Cultural Organization. He won the Tianjin Natural Science Prize in
2002, won the New Century Excellent Talents in University from the Chinese Ministry of Education in
2007 and won the Beijing Science and Technology Prize in 2013. His research interests include creative
mechanisms and robotics. He has authored or coauthored more than 100 papers and holds more than 30
patents. He proposed the novel concept of “Geometry Robot” and developed dozens of “Geombot”
products (http://www.geombot.com), which have been applied in many fields such as education and
exhibition.
Geometry Robot
We proposed the name of “Geometry Robot”, which is different from conventional wheeled, tracked and
legged mobile robots. It has planar or spatial geometry shapes and multiple moving modes. A geometry
robot is constructed by linkage mechanisms studied in the area of mechanical engineering. In this
representation, we first take the mobile four-bar linkage mechanism as an example to illustrate the basic
moving modes (rolling motion, biped motion, sliding motion and crawling motion) of geometry robots.
After that, hundreds of polygon robots (triangle, hexagonal, octagon) and polyhedron robots (tetrahedron,
cube, octahedron) we invented are introduced separately. Finally, we discussed four kinds of control
methods used in these geometry robots: probability control, binary control, gesture control and humanmachine interaction control. We hope the concept of geometry robot may play a role of integrating the
mechanical engineering and electronics engineering.
Keynote Speaker II
Dr. Zhenggang Lian
Optoelectronics Research Centre, University of Southampton; YOEC
Biography
Zhenggang Lian received the B.Eng degree (with first class honour) and Ph.D. degree in Electronic and
Electrical Engineering from the University of Nottingham, U.K., in 2006 and 2010, respectively. He then joined
the Optoelectronics Research Centre, University of Southampton, as a research fellow. His current research
interests include fabrication and characterisation of micro-structured optical fibres, based on variety of
compound glasses.
The fabrication techniques of optical fibers
Optical fibers contains verity of structures and materials which used for different applications, such as in
telecommunication, sensing, high power generation etc. This talk will review some of the structures, for
instance, standard core/cladding geometry, microstructured optical fibers and their usual manufacturing
techniques. Also, the talk will introduce inorganic compound glass fibers and their fabrication methods, e.g.
extrusion and glass sheet rolling technique.
Keynote Speaker III
Prof. YUAN Hong
Jinan University, Guangzhou, China
He received his B. S. and M. S. degree in engineering (Solid Mechanics) from Huazhong University of Science
and Technology, China, in 1983 and 1985, respectively, and his Ph.D. degree in engineering (Solid Mechanics)
from the University of Science and Technology of China, in 1994. From 1987 to 1989, he was a visiting scholar
at Belarusian State University, Republic of Belarus. From 1998 to 2000, he was a postdoctoral research fellow at
Ibaraki University, Japan. He was a visiting professor at the Hong Kong Polytechnic University in 2000, 2001,
2003, 2004 and 2012. Currently, he is a full professor and the deputy director of Institute of Applied Mechanics
at Jinan University, Guangzhou, China. He won the first prize of Science and Technology of Guangdong
Province in 2006, and the second prize of Science and Technology of Guangdong Province in both 2012 and
2013. His research interests include composite materials, interfacial mechanics and precision instrument. He has
authored or coauthored more than 130 papers and according to Web of Science, the papers have been cited more
than 500 times by SCI papers.
Interfacial Behavior of Pipe Joints under Torsion Loads
The interfacial behavior of pipe joints is studied in the presentation. Firstly, through the nonlinear fracture
mechanics, the analytical expressions of the interfacial shear stress and the load-displacement relationship at
loaded end of pipe joints under torsion loads are obtained. Thus the shear stress propagation and the debonding
progress of the whole interface for different bond lengths could be predicted. Secondly, through the analytical
solutions, the influences of different bond length on the load-displacement curve and the ultimate load are
studied. The stress transfer mechanism, the interface crack propagation and the ductility behavior of the joints
could be explained. Finally, the results of finite element method (FEM) using ABAQUS modeling are also given
for comparison.
Afternoon, Aug. 16, 2014(Saturday)
Hongguoyuan Hotel, Beijing Jiaotong University, China
13：30 - 17：00
Note:
Arrival and Registration
(1) You can also register at any time during the conference.
(2) The organizer doesn’t provide accommodation, and we suggest you make an early reservation.
Morning, Aug. 17, 2014 (Sunday)
Venue: Science Conference Hall, Beijing Jiaotong University
9:00-9:20
9:20-9:40
9:40-10:20
10:20-11:00
11:00-11:40
11：50 - 13：00
Opening Ceremony
Group Photo
Keynote Speaker I
Pro. Yao Yan-An
Beijing Jiaotong University, Beijing, China
Keynote Speaker II
Dr. Zhenggang Lian
Optoelectronics Research Centre, University of Southampton; YOEC
Keynote Speaker III
Prof. YUAN Hong
Jinan University, Guangzhou, China
Lunch Break (Siyuan Restaurant, on the 2nd Floor)
Afternoon, Aug. 17, 2014 (Sunday)
Oral_1: General Mechanical Engineering and Applied Mechanics
Venue:（1st Conference Room, Mechanical Engineering Teaching Building）
Time: 13:30 -15:30
Section chair: Prof. Miao Rui, Shanghai Jiao Tong University, China
ID
H6082
H6188
H6200
H6227
H6254
H6440
H6428
H6463
M5060
H6094
H94
PaperTitle
Reynolds Number Effect Investigation of Shock Wave on
Supercritical Airfoil
Two-dimensional Crack Growth Simulation under mixed-mode
loading
Effects of defect shapes on stress of high-strength steel pipe using
FSI method
Analysis of Dynamic Characteristics on Continuous Tension
Leveler
Numerical Simulation of Borehole Heat Transfer with Phase
Change Material as GROUT
The regular pattern analysis on the temperature stress of
reinforced concrete beams strengthened with carbon fiber
Development of an embedded discrete fracture model for multiphase flow in fractured reservoir
Finite Analytic Method for 2D Fluid Flows in Porous Media with
Full Tensor Permeability
Helium bubbles effect on the mechanical properties of CLAM
alloys by milte-scale simulations
Tribological Properties for Cast Iron CrMo at High Temperature
Non-linear Dynamic Modeling and Experiment of Harmonic Gear
Drive
15：30 - 15：50
Author
Xu Xin
He Wentao
Lan Huiqing
Chen Bing
Wang Jinlong
Chen Yiming
Zhou Fangqi
Liu Zhifan
Zhang Jingwei
Unit 63833
Huazhong University of Science
and Technology
Beijing Jiaotong University
University of Science and
Technology Beijing
Donghua University
University of Science and
Technology Liaoning
University of Science and
Technology of China
University of Science and
Technology of China
North China Electric Power
University
Yan Yutao
Northeastern University
Zhang Bohui
Harbin Institute of Technology
Coffee Break
Afternoon, Aug. 17, 2014 (Sunday)
Oral_2: Electronics and Integrated Circuits
Venue:（1st Conference Room, Mechanical Engineering Teaching Building）
Time: 15:50-17:50
Section chair: Prof. Ma Jianwei, Dalian University of Technology, China
ID
H59
M5173
M5201
M5171
H90
H6204
M5265
H6040
H6165
H61831
H23
H32
H6106
H6167
PaperTitle
Author
Design of a 60 GHz Low Power, High Gain Low-Noise Amplifier
in 90nm CMOS
The Design and Prototype Testing of An On-line Monitoring
System for Inland Water Ship Sewage
Low-power technical analysis for Multicore, multithreaded
processors
Using Voronoi Tessellation and Delaunay Triangulation to
Evaluate Spatial Uniformity of Particle Distribution
An Expansion of LESO for Motion Control with High Frequency
Disturbance
Performance of Pavements Affected by Static and Impact load
Orthogonal Experiment on Characteristic Parameters of Oil-air
Lubrication System
Study of cluster-footprint analysis testing algorithm and system
Research on Excitation & Measurement Strategy of Tuber
Electrical Resistance Tomography System
bDesign And Implementation Of Digital Charger Based On Buck
Converter And MPPT Technology
Optimization and improvement of a Measuring Model for
Coating Bonding Strength of Revolution Body
A High Performance Baseband Testing Instrument for Access
Network System: A PXI-Based Approach
The Fully Digital Controlled Corrector Magnet Power Converter
with a Shunt as a Current Sensing Component
Research of Discrete Curvature Estimation Method Based on
Local Space Parabola
18：00 - 19：00
Yu Zhenxing
Southeast University
Deng Jian
Wuhan University of Technology
Fang Juan
Beijing University of Technology
Peng Yahui
Beijing Jiaotong University
Wang Haiqiang
Laura Č ygaitė
Zhou Zhenghui
Li Yan
Deng Xiang
Fan Shengwen
Zhang Jiaying
Gao Yayun
Wang BaoSheng
Ma Jianwei
BeihangUniversity
Vilnius Gediminas Technical
University
North China University of
Technology
Kunming University of Science &
Technology
Beijing Jiaotong University
North China University of
Technology
Academy of Armored Forces
Engineering
Beijing University
National Synchrotron Radiation
Research Center
Dalian University of Technology
(Siyuan Restaurant, on the 2nd Floor)
Afternoon, Aug. 17, 2014 (Sunday)
Oral_3: Electrical, Control and Automation of Manufacturing
Venue:（3rd Conference Room, Mechanical Engineering Teaching Building）
Time: 13:30-15:30
Section chair: Prof. Li Maode, Tongji University, China
ID
M5168
M5266
H6025
H6026
H6360
H6474
H6485
H6194
H6186
H8
H2
H6351
H6388
H6191
PaperTitle
Parallel Implementation of BP Neural Network for Traffic
Prediction on Sunway Blue Light Supercomputer
Research on Coanda Effect appeared in oil-air annular flow
through the conical diffuser
Design of the Three-Dimension Motion Platform Control System
Based on EtherCAT
Research on Mitigation of Low Order Harmonics in the GridConnected Single-Phase PV Inverter
The adaptive feedback control with dynamic feed-forward
compensation of the giant magnetostrictive actuator
PRI Control Methodology for Grid-connected Inverters in
Harmonic Distorted Grid Utility
Treatment of Substructure Rigid-body Modes in Close-loop
Coupling Disc Brake Squeal Model
Full Power Experiment Method of Single-phase PWM Back-toback Converter
The design of step motor subdivision drive controller based on
FPGA
The Information Fusion Technology of the Attitude Angle Based
on the BP Neural Network
Application of Back Propagation Neural Network for Partial
Discharge Pattern Recognition
Disturbance Observer in Robust DC Motor Control
Research on the Multimodal Interaction System Based on
Reception Robot
Research and application of energy saving technology
of inverter in Light Load
15：30 - 15：50
Author
Feng Jinqiao
Wang Ying
Kang Cunfeng
Yang Liyong
Computing Center of Shandong
Province
North China University of
Technology
Beijing University of Technology
North China University of
Technology
Deng Kai
Shanghai Jiao Tong University
Lin Huipin
Zhejiang University
Du Yongchang
Tsinghua university
Zhou Jinghua
North China University of
Technology
Dong Hongyan
China Three Gorges University
Lin Feng
Shenyang Aerospace University
Chang WenYeau
St. John’s University
Huang Hongcheng
Miao Weiying
Zhou Jiuyan
Coffee Break
Shanghai Jiao Tong University
Beijing University of Post and
Telecommunication
China Three Gorges University
Afternoon, Aug. 17, 2014 (Sunday)
Oral_4: Product Design and Industrial Engineering
Venue:（3rd Conference Room, Mechanical Engineering Teaching Building）
Time: 15:50 –17:50
Section chair: Prof. Gao Yuanlou, Beihang University, China
ID
PaperTitle
Author
H6144
Design and Analysis of Power Assist Elbow for EVA Spacesuit
Zhou Minglian
Beijing University of Civil
Engineering and Architecture
H6069
Maintenance Optimization of the OLED Manufacturing Process
Chang Peng
Guangdong University of
Technology
H6412
Research on fatigue problems of CFRP-reinforced concrete
structure
Tian Shuai
University of Science and
Technology Liaoning
H6258
Modeling and Simulation of Single Screw Extruder Control
System
Wang Lei
Beihang University
H6205
Forecasting technique for the production plan of the local
earthenware industries of Thailand
Weerapol
Namboonruang
Faculty of Science and
Technology Muban Chombueng
Rajabhat
H6210
Optimized asphalt mixtures for noise reduction in Lithuanian
roads
Laura Č ygaitė
Vilnius Gediminas Technical
University
H6482
Some Exact Concise Analytic Solutions of 6 NET Timoshenko
Beams
Tian Hongliang
China Three Gorges University
M5122
Transport Model Choice in Military Logistics between Taiwan
and Kinmen
Chou ChenChang
Penghu University of Science
and Technology
M5234
An IPTV Recommendation Method Based on Latent Context
Guo Wenming
Beijing University of Post and
Telecommunication
H6045
Fault Prediction Method of the Marine Gas Turbine Based on
Neural Network-Markov
Cui Jianguo
Shenyang Aerospace University
H6384
Technological Process of 500MPa Hot-rolled Ribbed Steel Bar
Wu Changjin
Shanghai University
18：00 - 19：00
(Siyuan Restaurant, on the 2nd Floor)
Afternoon, Aug. 17, 2014 (Sunday)
Oral_5: Signal and Image Processing
Venue:（5th Conference Room, Mechanical Engineering Teaching Building）
Time: 13:30 –15:30
Section chair: Prof. Fang Juan, Beijing University of Technology, China
ID
PaperTitle
Author
H50
A new method for weak quasar signal correlation and detection
Tang Jifei
Southeast University
H6046
Motion Key-Frames Extraction Based on Locally Linear
Embedding
Zhang Qiang
Dalian University
H6146
Algorithm Analysis Based on IaaS cloud of vocational colleges
Cheng Cong
Beijing Polytechnic College
H6161
The HIS_MSR Algorithm for Foggy Image Enhancement
Li Zhonghai
Shenyang Aerospace University
H6168
Kalman Filter and Complementary Filter in Attitude Estimation
of APM
Lin Feng
Shenyang Aerospace University
H6268
Flow-induced Noise Simulation Based on LES/Lighthill Hybrid
Method
Zhang Yongou
Huazhong University of Science
and Technology
H56
An novel computational method and application to
reconstruction of dynamic loads on a plate
Wang linjun
China Three Gorges University
H84
Nonlinear Analysis of Coupled Duffing Oscillators Based on
Variable Step-size Adomian Decomposition Method
Chen Chen
Beijing Jiaotong University
H6314
Study of Mechanical Equipment Large Data Signal Management
System
Pan Nan
Kunming University of Science
& Technology
H6358
Research Progress on Vehicle NVH Technology
Yue Mingyue
Nantong University
H24
A Programmable Frequency Divider for Multi-Standard Wireless
Receivers
Wang Jiafeng
Southeast University
H82
FPGA Based Dynamic Reconfigurable Implementation of Image
Processing Algorithms
Mina Zolfy
Lighvan
University of Tabriz, Tabriz, Iran
H46
Design of a Gain-Boosted Cascode Amplifier with High unityBandwidth
Wang Linfeng
Southeast university
15：30 - 15：50
Coffee Break
Afternoon, Aug. 17, 2014 (Sunday)
Oral_6: Communication, Networks and Information Technologies
Venue:（5th Conference Room, Mechanical Engineering Teaching Building）
Time: 15:50 –17:50
Section chair: Prof. Sun Haojun, Shantou University, China
ID
H6160
H6344
PaperTitle
Author
An Analysis of the UAV Relay Coverage in Mobile Ad-Hoc
Network
Huo Shuaike
Nanjing University of
Aeronautics and Astronautics
Real-time Double-laser-stripes Measurement System for
Subway Tunnel Profile Based on High-speed Vision
Wang Qiaozhi
Beijing Jiaotong University
M5160
An implementation of high performance cloud data
management
Wang Jiantao
National Research Center for
Trustworthy Embedded
Software Technique and
Engineering
H6437
Adaptive Mesh Refinement for 2D Non-Isothermal Three-Phase
Flows in Porous Media Comprised of Different Rock Types
Ding Yunhan
University of Science and
Technology of China
H6456
Robust integrity design for uncertain NCS with actuator
saturation based on discrete event-triggered communication
scheme
CAO Huichao
Lanzhou University of
Technology
M5167
Extraction and Segmentation of Books Call Number Image for
Books on the Shelves of Library
Fang Jianjun
Beijing Union University
M5185
Partially Overlapped Channel Assignment Using Discrete Particle
Swarm Optimization
Wang Jihong
Jilin University
M5192
Gait Abnormality Detected Of Pigs Based On Machine Vision
Zhu Weixing
Jiangsu University
M5114
Designing Parking Guidance Information System Based on
Internet of Things
Hu Yucong
South China University of
Technology
H6245
Design of QoS protocol matching method in the DDS
specification
Li Changqing
Equipment academy
M5151
Rolling bearing safety region estimation based on information
entropy
Zhang Lei
Shantou University
18：00 - 19：00
(Siyuan Restaurant, on the 2nd Floor)
Instructions for Oral Presentations
Devices Provided by the Conference Organizer:
Laptops (with MS-Office & Adobe Reader)
Projectors & Screen
Materials Provided by the Presenters:
Power Point or PDF files
Duration of each Presentation (Tentatively):
Regular Oral Session: about 10 Minutes of Presentation 5-10 Minutes
Instructions for Poster Presentation
Materials Provided by the Conference Organizer:
Panels
Adhesive Tapes or Clamps
Materials Provided by the Presenters:
Home-made Posters
Requirement for the Posters:
Material: not limited, can be posted on the Panels
Size: A3
Content: for demonstration of the presenter’s paper Requirement for the Presenters:
Stand beside his (her) Poster through the Session, and discuss with the readers about his (her) paper
Hotel Contact us
TEL: +86-10-51685100, +86-13146171891
Add: Beijing Jiaotong University, No.3 Shangyuancun, Haidian District, Beijing, P. R. China 100044