VOLUME 3 – ELECTRICAL CONTRACT
DESIGN, ESTIMATING & DOCUMENTATION
Chapter D
Standard Drawings
And
Specifications Implementation
Volume 3 – Electrical Contract
Design, Estimating & Documentation
March 2009
Chapter D
Table of Contents
D.1
Introduction......................................................................................................................... 3
D.2
Ontario Provincial Standard Drawings ............................................................................ 4
D.2.1
Introduction .............................................................................................................................................4
D.2.2
OPSD Number .........................................................................................................................................4
D.2.3
Title ...........................................................................................................................................................4
D.2.4
Drawing Revision Number......................................................................................................................4
D.2.5
MTO Implementation Date ....................................................................................................................5
D.2.6
OPSD Manual Revision Number ...........................................................................................................5
D.2.7
Remarks....................................................................................................................................................5
D.3
List of Standard Specifications........................................................................................ 16
D.3.1
Introduction ...........................................................................................................................................16
D.3.2
OPSS Number ........................................................................................................................................16
D.3.3
Title .........................................................................................................................................................16
D.3.4
Date of Specification ..............................................................................................................................16
D.3.5
MTO Implementation Date ..................................................................................................................16
D.3.6
OPSS Manual Revision Number ..........................................................................................................16
D.4
MTO Standard Drawings................................................................................................. 18
D.4.1
MTODs ...................................................................................................................................................18
Volume 3 - Electrical Contract
Design, Estimating & Documentation
D-1
March 2009
Std. Dwgs. & Std. Specs. Implementation
This page intentionally left blank.
D-2
March 2009
Volume 3 - Electrical Contract
Design, Estimating & Documentation
Chapter D
D.1
STANDARD DRAWINGS
AND SPECIFICATIONS IMPLEMENTATION
Introduction
The ministry uses the Ontario Provincial Standards exclusively in the design and preparation of MTO contracts.
When new and revised standards are issued in the Ontario Provincial Standard manuals, they are implemented for
use by the ministry.
The Ontario Provincial Standards Manuals are provincial publications. Instructions regarding the implementation
date of revisions to OPS drawings and specifications are not specified on the Manual Revision Information Sheet
when they are published, as was the case with revisions to MTO drawings and specifications.
This chapter is published to provide:
(a)
(b)
direction to ministry staff regarding the implementation dates of revised standards and
guidelines on whether an issued revised drawing or specification is applicable for ministry use.
The Electrical Engineering Section is responsible for updating this chapter.
This chapter covers revisions to Standard Drawings and Standard Specifications contained in the following
manuals.
Ontario Provincial Standards for Roads and Municipal Services
Volume 1 - General and Construction Specifications
Series
Contents
600
Electrical
900
Structural
Volume 4 - Drawings for Electrical Works
2000
Abbreviation
2100
Underground Work, etc.
2200
Foundations, etc.
2300
Work on Structures
2400
Purchasing Standard
2500
Traffic Signals
Volume 5 – MTO General Conditions of Contract and Specifications for Construction
PROV106
Volume 3 - Electrical Contract
Design, Estimating & Documentation
General specification for Electrical Work
D-3
March 2009
Std. Dwgs. & Std. Specs. Implementation
D.2
D.2 - Ontario Provincial Standard Drawings
Ontario Provincial Standard Drawings
D.2.1
Introduction
This section lists the Ontario Provincial standard drawings used in MTO contracts. The following
describes the headings on the list of standard drawings.
D.2.2
OPSD Number
Every standard drawing is assigned a unique number which allows for additions to the system.
♦
On all NEW drawings, a three-digit number after the decimal is used.
♦
On all EXISTING drawings being revised, a three-digit number after the decimal is used, except when
that existing drawing is referenced by another drawing, then it retains the original two-digit or threedigit numbers after the decimal.
♦
All OPS Drawing numbers are listed in CPS with 4-digit numbers after the decimal. Although most of
the printed OPS Drawings have 2-digit or 3-digit numbers after the decimal, the CPS list shows 4-digit
after the decimal by adding zero(s).
D.2.3
Title
Each standard drawing has a unique title.
D.2.4
Drawing Revision Number
When a standard drawing is revised but not renumbered, the revision number is noted. When an existing
drawing is revised and renumbered, the revision number returns to zero or has no indication. Each
subsequent revision to the standard drawing is identified by increasing the number by one. To make
reference to a specific standard drawing, it is important to quote the revision number as well as the
standard drawing number.
D-4
March 2009
Volume 3 - Electrical Contract
Design, Estimating & Documentation
D.2 - Ontario Provincial Standard Drawings
D.2.5
Std. Dwgs. & Std. Specs. Implementation
MTO Implementation Date
The standard drawings are not automatically implemented for use in MTO contracts upon publication. To
allow for sufficient notice for tender package preparation and changes to the contract documents and
drawings where necessary, the implementation date of a standard drawing may be established after
publication.
The implementation date chosen depends on the extent of changes required and is subject to the policy
contained in Quality and Standards Directive C-13 (Section B.4.11 of this manual). The implementation
date shown corresponds to the earliest tender advertising date of the contracts which must contain the new
or revised standard drawing. It is advisable to retain superseded standard drawings in the Standard
Drawing Manual until the revised standard drawing is implemented.
D.2.6
OPSD Manual Revision Number
Revisions, additions, and deletions to the Standard Drawing Manual are accompanied by a Manual
Revision Information Sheet. The information sheets are sequentially numbered. Besides giving
instructions as to which drawings are revised, added or cancelled, the information sheets usually contain
information describing, in detail, the changes made to the standard drawings. The manual revision number
is listed in this section to facilitate locating the appropriate manual revisions information sheet when
information regarding the nature of the changes is required. By checking this column, one can determine if
the Standard Drawing Manual being used is up-to-date.
D.2.7
Remarks
When the standard or newly issued drawings are approved for use in MTO contracts, a note on what
drawing to use is indicated.
Volume 3 - Electrical Contract
Design, Estimating & Documentation
D-5
March 2009
Std. Dwgs. & Std. Specs. Implementation
Title
OPSD #
2000.010
2001.010
2001.020
2001.030
2001.040
2001.050
2001.060
2001.070
2001.080
2001.090
2001.100
2001.110
2001.120
2001.130
2013.301
Electrical Abbreviations and Symbols
Electrical Legend I
Electrical Legend II
Electrical Legend III
Electrical Legend IV
Electrical Legend V
Electrical Legend VI
Electrical Legend VII
Electrical Legend VIII
Electrical Legend IX
Electrical Legend X Universal
Management System Equipment
Identifier
Electrical Legend XI Universal Traffic
Management System Identifier (Cont'd)
Electrical Legend XII
Electrical Legend XIII
Traffic Control Symbols Pedestrian
Signals
D.2 - Ontario Provincial Standard Drawings
Dwg.
Rev #
MTO
Implementation Date
OPSD
Man'l
Rev. #
01/04/1997
01/04/1997
01/04/1997
01/04/1997
01/04/1997
01/04/1997
01/04/1997
01/04/1997
01/04/1997
01/04/1997
01/04/1997
12
12
12
12
12
12
12
12
12
12
12
01/04/1997
12
01/04/1997
01/04/1997
12/03/2009
12
12
24
Remarks
Series 20. Abbreviations
D-6
March 2009
Volume 3 - Electrical Contract
Design, Estimating & Documentation
D.2 - Ontario Provincial Standard Drawings
Title
OPSD #
2100.01
2100.05
2100.06
2100.07
2101.01
2101.02
2102.01
2103.01
2103.02
2103.030
2103.04
2103.05
2103.06
2104.01
2110.010
2110.050
2110.060
2110.070
2111.020
2111.030
2111.040
2111.050
2112.01
2112.02
2112.030
2112.040
Std. Dwgs. & Std. Specs. Implementation
Cable Installation in Trenches
Cable and Duct Protection and Marking
Rigid Ducts Encased in Concrete
Steel Encased Ducts by Subsurface
Installation
Duct Installation in Trenches
Extension of Existing Rigid Ducts Encased
in Concrete
Underground Rigid Duct Connection at
Concrete Structure
Rigid Duct Termination for High Voltage
Cables at Utility Poles
Duct Installation Profiles
Rigid Duct Installation in Existing Paved
Area - Unshrinkable Backfill Method
Rigid Duct Installation in Existing Paved
Area - Granular Backfill Method
Duct Installation at Utility Crossings
Augering Pits for Subsurface Installation of
Ducts and Encasements
RE Ducts Surface Mounted on Structures
Electrical Maintenance Hole Cast in Place
1200 mm X 1200 mm
Electrical Maintenance Hole Cast in Place
600 mm X 1450 mm
Electrical Maintenance Hole Cast in Place
1800 mm X 2440 mm
Electrical Maintenance Hole Cast in Place
1200 mm X 1650 mm
Electrical Maintenance Hole Precast
Concrete 600 mm X 1450 mm
Electrical Maintenance Hole Precast
Concrete 1200 mm Dia.
Electrical Maintenance Hole Precast
Concrete 1200 mm X 1650 mm
Electrical Maintenance Hole Precast
Concrete 1800 mm X 2400 mm
Electrical Handhole Precast Concrete with
Cover 300 mm Dia.
Electrical Handhole Precast Concrete with
Cover 460 Dia.
Electrical Handhole Precast Concrete 675
mm Dia
Electrical Handhole Precast Concrete 600
mm X 600 mm
Dwg.
Rev.#
MTO
Implementation Date
OPSD
Man'l
Rev. #
Remarks
1
1
1
Canc.
01/03/1994
01/03/1994
01/03/1994
01/03/1994
9
9
9
9
Use MTOD
Not Used
01/03/1994
01/03/1994
9
9
Use MTOD
Not Used
01/06/1990
5
Use MTOD
01/03/1994
9
01/03/1994
01/05/1998
9
13
01/11/1990
6
01/03/1994
01/03/1994
9
9
01/03/1994
01/04/1997
9
11
01/04/1997
11
01/04/1997
11
01/04/1997
11
01/04/1997
11
01/04/1997
11
01/04/1997
11
01/04/1997
11
1
01/03/1994
9
1
01/03/1994
9
11/05/2005
19
11/05/2005
19
Not Used
Not Used
Use MTOD
Series 21. Underground Work, Etc.
Volume 3 - Electrical Contract
Design, Estimating & Documentation
D-7
March 2009
Std. Dwgs. & Std. Specs. Implementation
OPSD #
2112.05
2113.010
2113.02
2114.01
2115.01
2116.0 1
2116.02
2116.03
2117.01
2117.02
2118.01
2118.02
2123.01
2123.02
2123.03
2126.010
2126.020
2130.01
D.2 - Ontario Provincial Standard Drawings
Title
Electrical Handhole Precast Concrete with
Cover 300 mm X 500mm
Electrical Handhole Non and Semi-Concrete
General Requirements
Electrical Handhole Polymer Concrete 560
mm X 860mm
Electrical Handhole Polyethylene 300 mm X
500 mm
Electrical Handhole 460 mm Dia. PVC
Drainage Facilities for Electrical
Maintenance Holes
Electrical Maintenance Hole Drains to
Drainage Pockets, Embankments Outlets
and Ditches
Electrical Maintenance Hole Drains to
Storm Sewer Systems
Electrical Maintenance Holes General
Installation Requirements
Electrical Handholes General Installation
Requirements
Electrical Chamber Installation in Median
Electrical Chamber Installation in Slope
Electrical Maintenance Holes Entry of
Direct Buried Ducts
Electrical Maintenance Holes Entry of
Encased Duct s
Electrical Handholes Entry of Direct Buried
and Encased Ducts
Distribution Assembly Type 1 Concrete Pad
and Duct Provisions Plan and Section A-A
Distribution Assembly Type 1 Concrete Pad
and Duct Provisions Section B-B
Supply Control Cabinet Installation
Overhead and Underground Services
Dwg.
Rev.#
MTO
Implementation Date
OPSD
Man'l
Rev. #
Remarks
01/03/1994
9
11/05/2005
19
01/03/1994
9
01/03/1994
9
01/03/1994
01/03/1994
9
9
01/03/1994
9
01/03/1994
9
01/01/2001
14
Not Used
11/05/2005
19
Use MTOD
1
1
Not Used
01/03/1994
01/03/1994
01/03/1994
9
9
9
Use MTOD
01/03/1994
9
1 Not
Used
1
11/05/2005
19
12/03/2009
24
1
12/03/2009
24
1
Not Used
01/06/1990
5
Use MTOD
Use MTOD
Series 21. Underground Work, Etc. (Cont'd)
D-8
March 2009
Volume 3 - Electrical Contract
Design, Estimating & Documentation
D.2 - Ontario Provincial Standard Drawings
OPSD #
2200.01
2200.02
2200.03
2200.04
2200.070
2200.080
2201.010
2201.02
2202.01
2203.01
2203.03
2210.01
2210.020
2210.030
2215.02
Std. Dwgs. & Std. Specs. Implementation
Title
Concrete Footing For Base Mounted
Lighting and Signal Poles
Concrete Foundation for Direct Buried
Lighting Poles Where Rock is Encountered
Concrete Foundation for Base Mounted
Lighting Poles Where Rock is Encountered
Concrete Footing for 3.3 m Base Mounted
Metal Pole
Pole Footing in Earth for Cast in Place
Concrete Barrier
Pole Footing in Rock for Cast in Place
Concrete Barrier
Steel Footing for Base Mounted Poles 220
mm Dia. x 2300 mm Length
Steel Footing for Electrical Equipment 85
mm Dia. X 1830 mm Length
Installation for Steel Footing
Mounting Hardware for Steel footings
Steel Equipment Base Plate for Controller
Cabinet
Local Grading at Pole Foundations
Installation of Direct Buried Poles in Slopes
High Mast Lighting Pole, Apron
Anchorage Assembly
2215.03
Pole Mounting Details for Base Mounted
Metal Pole
2216.010
Anchorage Assembly for Pole Footing in
Concrete Barrier
2218.010
High Mast Lighting Pole – Anchorage
Assembly Placement
2220.01
Pole Handhole Locations
2225.010
Concrete Lighting Pole - Direct Buried
2228.010
Metal Lighting Pole - Base Mounted
2232.010
Sectional Steel Pole with Brackets,
Luminaire and Traffic Signal Head
2235.01
Pole Guying Details
2236.01
Wood Pole and Guy Anchorage Settings in
Solid Rock
2238.01
Wood Pole in Earth
2239.01
Cribbing for Wood Poles in Muskeg
2239.02
Log Anchor for Guy in Muskeg
Series 22. Foundations, Etc
Volume 3 - Electrical Contract
Design, Estimating & Documentation
Dwg.
Rev.#
1
Not used
MTO
Implementation Date
04/05/2006
OPSD
Man'l
Rev. #
20
Remarks
Use MTOD
01/04/1985
Not used
01/03/1995
1
04/05/2006
20
0
21/05/2003
15
0
21/05/2003
15
01/03/1994
10
01/03/1994
10
01/11/1989
01/11/1989
01/06/1990
4
4
5
01/11/1990
18/01/2007
04/05/2006
04/05/2006
6
23
20
20
04/05/2006
13
01/04/1997
12
1
18/11/2007
23
1
0
0
0
18/112007
15/03/2007
15/03/2007
15/03/2007
23
21
21
21
1
Not used
01/01/1989
01/04/1993
1
9
01/04/1985
01/03/1994
01/03/1994
9
9
1
1
1
0
2 Not
Used
2
Use MTOD
Use MTOD
Use MTOD
D-9
March 2009
Std. Dwgs. & Std. Specs. Implementation
OPSD #
Title
2240.01
Wood Pole with Elliptical Bracket Overhead
and Underground Services
2242.01
Wood Pole with Neutral Supported Cable
2242.02
Wood Poles with Aerial Cables Lashed on
Messenger
2245.01
Installation of Aerial Cable Systems
2245.02
Minimum Vertical Clearances for Aerial
Cable Systems
2250.01
Aluminum Tapered Elliptical Brackets
Mounting Details
2255.010
Pole Wiring Diagram - 120 V System
2255.020
Pole Wiring Diagram - 120/240 V System
2255.030
Pole Wiring Diagram - 347/600 V System
2255.040
Pole Wiring Diagram - Lighting Pole on
Bridge Structure
2260.01
Control Circuit Schematics for Pole Mounted
Relays
2265.01
Grounding for Steel Beam Guide Rail
2265.02
Grounding for Box Beam Median Barrier
Series 22. Foundations, Etc. (Cont'd)
OPSD #
2300.010
2300.020
2300.030
2302.010
D.2 - Ontario Provincial Standard Drawings
Title
Dwg.
Rev.#
March 2009
OPSD
Man'l
Rev. #
2
15/03/2007
21
1
01/04/1985
01/03/1994
9
2
Not Used
11/05/2005
11/05/2005
19
19
5
15/03/2007
21
12
Not Used
01/04/1997
01/04/1997
01/04/1997
01/04/1997
Remarks
Use MTOD
6
Use MTOD
01/04/1985
01/04/1985
01/04/1985
Dwg.
Rev.#
Rigid PVC Junction Box Type P1
Rigid PVC Junction Box Type P2
Not Used
Rigid PVC Junction Box Type P4
Not Used
Embedded Work Detail for Rigid PVC
Junction Box, Type P3-1, for Use in
Concrete Barrier Wall
2302.02
Expansion and Deflection Fitting Assembly 2
for 50 mm & 75 mm Rigid Ducts
2302.040
Embedded Work in Structure - New Jersey
Not
Type Concrete Barrier Wall
Used
2305.020
Wall Mounting Installation of Underpass
1
Luminaires
2310.010
Underpass Luminaire Installation, Ceiling
0
Mounted with "TEE" Bracket
2310.020
"TEE" Bracket for Ceiling Mounting
0
Underpass Luminaire
2310.030
Wedge Mounting Bracket for Underpass
0
Luminaire
2310.040
Support Bracket for Underpass Luminaire
0
Column Mounted
2315.010
Underpass Luminaire Wiring Details
0
Series 23. Work Structures.
D-10
MTO
Implementation
Date
MTO
Implementation Date
01/04/1985
01/04/1985
01/05/1998
01/04/1985
OPSD
Man'l
Rev. #
13
01/06/1991
7
01/06/1991
7
21/05/2003
15
21/05/2003
15
21/05/2003
15
21/05/2003
15
21/05/2003
15
21/05/2003
16
Remarks
Use MTOD
Use MTOD
Use MTOD
Volume 3 - Electrical Contract
Design, Estimating & Documentation
D.2 - Ontario Provincial Standard Drawings
Title
OPSD #
2400.000
2400.010
Std. Dwgs. & Std. Specs. Implementation
Dwg.
Rev.#
MTO
Implementation Date
OPSD
Man'l
Rev. #
1
1
12/03/2009
12/03/2009
24
24
1
12/03/2009
24
2400.030
Distribution Assembly Legend
Distribution Assembly - Plan and
Elevations
Distribution Assembly – Equipment
Layout
Distribution Assembly Wiring Schematic
1
12/03/2009
24
2400.100
Warning Signs for Electrical Equipment
0
12/03/2009
24
2410.01
2410.02
Spun Concrete Pole - Class "D"
18.3 m Spun Concrete Pole - Class "D"
for TV Camera Mounting
Steel Pole - Base Mounting
Steel Pole Concrete Barrier Mounting
1.8 m or 2.4 m Aluminum Tapered
Elliptical Bracket
1.8 m or 2.4 m Aluminum Tapered
Elliptical Bracket
Lamp Wattage Label for Luminaire
Frangible Bases
Aluminum Pole - Base Mounting
Supply Control Cabinet Assembly Type 1
- 120/240 V, 70 A, 1-Phase, 3-Wire
2
1
01/07/1994
01/01/1989
10
1
1
01/07/1994
01/07/1994
18/11/2007
10
10
23
4
18/11/2007
23
0
2
04/05/2006
11/05/2005
01/07/1994
01/05/1998
20
19
10
13
2400.020
2415.010
2416.010
2418.010
2420.01
2421.010
2428.01
2432.010
2440.010
Not Used
Remarks
Use MTOD
Series 24. Purchasing Standards.
Volume 3 - Electrical Contract
Design, Estimating & Documentation
D-11
March 2009
Std. Dwgs. & Std. Specs. Implementation
OPSD #
2440.020
2440.030
2440.04
2440.050
2440.060
2441.000
2441.010
2441.020
2442.01
2450.010
2450.011
2450.020
2450.021
2452.010
2452.020
2453.000
2453.010
2453.020
2453.050
2453.060
2453.070
2453.080
D.2 - Ontario Provincial Standard Drawings
MTO
Implementation Date
OPSD
Man'l
Rev. #
Title
Dwg.
Rev.#
Remarks
Supply Control Cabinet Assembly Type 1
- 120/208 V, 70 A, 3-Phase,
4-Wire
Supply Control Cabinet Assembly Type 1
and 2 - Enclosure
Pole Mounting Bracket - for Supply
Control Cabinet Assembly
Supply Control Cabinet Assembly Type 1
and 2 - Dead Front Panels
Supply Control Cabinet Assembly Type 1
and 2 - 3-Point Door Latch
Supply Control Cabinet Assembly Type 3
- 120/240 V, 100 A, 1-Phase, 3-Wire
Supply Control Cabinet Assembly Type 3
- Enclosure
Supply Control Cabinet Assembly Type 3
- Dead Front Panels
Duct Hanger
High Mast Lighting 25, 30, and 35 m
Octagonal Pole with Double Base Plate
High Mast Lighting Pole 25,30,and 35m
– 8 Sided Pole
High Mast Lighting 40 m and 45 m
Octagonal Pole with Double Base Plate
High Mast Lighting Pole 40 and 45m 12
Sided Pole
High Mast Lighting 25, 30 and 35m
Round Pole with Double Base Plate
High Mast Lighting 40 m and 45 m
Round Pole with Double Base Plate
High Mast lighting Pole Luminaire and
Handhole Orientation
Not Used
01/05/1998
13
Use MTOD
Not Used
01/05/1998
13
Use MTOD
Not Used
01/04/1985
High Mast Lighting Pole Cable Holder
and Storage Hook Details
High Mast Lighting Pole Handhole Cover
Hinges, Latches, and Padlock
High Mast Lighting Pole Nameplate
Details
High Mast Lighting Pole, Flood Light
Luminaire Mounting Details
High Mast Lighting Pole – Luminaire
Support Ring
High Mast Lighting Pole – Head Frame
and Ring Assembly
0
18/02/2004
18
0
11/05/2005
19
0
18/02/2004
18
1
04/05/2006
20
1 Not
Used
0
15/03/2007
21
04/05/2006
19
Use MTOD
01/05/1998
13
01/05/1998
13
Not Used
01/05/1998
13
Use MTOD
Not Used
01/05/1998
13
Use MTOD
01/05/1998
13
0
01/03/1994
18/02/2004
9
18
Not Used
18/02/2004
18
0
18/02/2004
18
Not Used
18/02/2004
18
0
18/02/2004
18
0
18/02/2004
18
Not used
19
Use MTOD
Use MTOD
Use MTOD
2453.020 or
2453.021
Use MTOD
Series 24. Purchasing Standards (Cont’d).
D-12
March 2009
Volume 3 - Electrical Contract
Design, Estimating & Documentation
D.2 - Ontario Provincial Standard Drawings
OPSD #
2453.090
2453.091
2453.140
2453.150
2453.160
2453.170
2453.180
2453.190
2453.200
2453.210
2453.220
2454.010
2456.010
2456.011
Std. Dwgs. & Std. Specs. Implementation
Title
High Mast Lighting Pole, Luminaire
Shroud
High Mast Lighting Pole, Luminaire
Shroud Details
High Mast Lighting Pole – Internal Drive
Raising and Lowering Equipment-List of
Components
High Mast Lighting Pole – Internal Drive
Raising and Lowering Equipment Layout
High Mast Lighting Pole – Internal Motor
and Winch Detail
High Mast Lighting Pole, Internal Drive
Raising and Lowering Equipment,
347/600V, 3-Phase, Wiring Diagram
High Mast Lighting Pole, Internal Drive
Raising and Lowering Equipment,
120/240V, 1-Phase, Wiring Diagram
High Mast Lighting Pole – External Drive
Raising and Lowering Equipment – List
of Components
High Mast Lighting Pole – External Drive
Raising and Lowering Equipment Layout
High Mast Lighting Pole, External Drive
Raising and Lowering Equipment,
347/600V, 3-Phase, Wiring Diagram
High Mast Lighting Pole, External Drive
Raising and Lowering Equipment,
120/240V, 1-Phase, Wiring Diagram
High Mast Lighting Pole Double Base
Details
High Mast Lighting Pole Anchorage
Assembly Details for Double Base Plate
High Mast Lighting Pole Anchorage
Assembly Details
Dwg.
Rev.#
MTO
Implementation Date
OPSD
Man'l
Rev. #
0
04/05/2006
20
0
04/05/2006
20
0
04/05/2006
19
0
04/05/2006
19
0
04/05/2006
19
0
04/05/2006
20
0
04/05/2006
20
0
04/05/2006
19
0
04/05/2006
19
0
04/05/2006
20
0
04/05/2006
20
0
18/02/2004
18
0
18/02/2004
18
0
18/02/2004
18
Remarks
Series 24. Purchasing Standards (Cont'd).
Volume 3 - Electrical Contract
Design, Estimating & Documentation
D-13
March 2009
Std. Dwgs. & Std. Specs. Implementation
Title
OPSD #
2500.010
2500.02
2501.01
2501.02
2502.010
2502.011
2505.01
2508.01
2510.01
2510.02
2512.02
2513.01
D.2 - Ontario Provincial Standard Drawings
600 mm Signal Arm and Signal Head
600 mm Signal Arm Attachment Details
Single Member Arm and Signal Head
Aluminum Single Member Arm
Attachment Details
Trffic Signal, Adjustable Mid-Section
Hanger
Trffic Signal, Dual-End Hanger
Traffic Signal - Pedestrian Head and
Pushbutton Mounted on Pole
Traffic Signal - Sectional Steel Poles with
Primary and Secondary Signal Heads for
Ramp Metering
Pole Mounted Controller Cabinet
Mounting Bracket for Pole Mounted
Controller Cabinet
"H" Beam Pedestal for Controller Cabinet
Dwg.
Rev.#
1
MTO
Implementation Date
OPSD
Man'l
Rev. #
01/07/1994
01/07/1994
01/07/1994
01/04/1985
10
10
10
18/11/2007
23
18/11/2007
01/04/1985
23
01/04/1985
1
01/06/1990
01/04/1985
5
01/04/1985
2514.01
Controller Cabinet Installation on Steel
Footing
Controller Cabinet on Pad
2514.02
Concrete Pad for Controller Cabinet
01/04/1985
2516.01
01/04/1985
2522.010
Pole Mounted System 170 Controller
Cabinet Attachment Details
Traffic Signal – Cushion Hanger
Not used
18/11/2007
2524.01
Traffic Signal - Double Arm Bracket
Not used
01/04/1985
2526.01
01/04/1985
2528.01
Traffic Signal - Bracket for Mounting
Pedestrian Instruction Sign on Pole
Traffic Signal Equip’t - Pole Wiring Diag. 1
01/04/1993
8
2529.01
Signal Wiring for Pedestrian Facilities
01/04/1993
8
2529.02
Signal Wiring Using 4/C Cable
Connected Radially 2 Phase
Signal Wiring Using 12/C Cable Tapped,
2 to 8 Phase
01/04/1993
8
01/04/1993
8
2529.03
Remarks
1 Not
Used
01/11/1989
4
01/06/1990
5
Use MTOD
Use MTOD
Series 25. Traffic Signals
D-14
March 2009
Volume 3 - Electrical Contract
Design, Estimating & Documentation
D.2 - Ontario Provincial Standard Drawings
Title
Dwg.
Rev.#
Signal Wiring Using 4/C and 12/C Cable
Tapped, 2 to 8 Phase
Signal Wiring Using 4/C Cable
Connected Radially, 2 to 8 Phase
Signal Wiring Using 4/C Cable
Connected Radially and 12/C Cable
Tapped, 2 to 8 Phase
Signal Wiring Using 19/C Cable Tapped,
2 to 8 Phase
Signal Wiring Using 7/C Cable
Connected Radially T-Intersection 2 to 3
Phase
Signal Wiring Using 4/C Cable
Connected Radially T-Intersection, 2
Phase
Signal Wiring Using 19/C Cable and 4/C
Cables per Quadrant 2 to 8 Phase
Splices for Traffic Signal Cable and
Extra Low Voltage Cable
Flasher Beacon and Downlight for
Roadway Sign and Wiring Diagram
Flasher Beacon Roadway Sign and
Wiring Diagram
Sign Light Assembly for Keep Right
Sign and Wiring Diagram
Flasher Beacons for Roadway Sign and
Downlight and Wiring Diagram
Flasher Beacons for Roadway Sign and
Wiring Diagram
Aerial Traffic Signal Installation
Not used
OPSD #
2529.04
2529.05
2529.06
2529.07
2529.08
2529.09
2529.10
2530.01
2532.01
2532.020
2534.010
2536.010
2536.020
2540.01
2540.02
2540.03
2545.01
2547.01
2550.01
2552.01
2554.01
Std. Dwgs. & Std. Specs. Implementation
Aerial Flasher Beacon Installation
Aerial Suspension Mounting Details for
Signal Heads and Flashing Beacons
PVC Junction Box for Signal Cable
Splicing
Controller Cabinet Grounding System
Installation of Aerial Interconnection
Cables at Terminal Board
Installation of Traffic Signal System
Equipment on Wood or Concrete Poles,
Overhead Wiring Installation
Installation of Traffic Signal System
Equipment on Wood or Concrete Poles,
Underground Wiring Installation
MTO
Implementtation Date
OPSDM
an'l
Rev. #
Remarks
01/03/1995
01/04/1993
8
01/04/1993
8
01/04/1993
8
01/04/1993
8
01/04/1993
8
01/04/1993
8
01/04/1985
2
Not used
Not used
01/04/1997
12
Use MTOD
01/04/1997
12
Use MTOD
Not used
01/04/1997
12
Use MTOD
Not used
01/04/1997
12
Use MTOD
Not used
01/04/1997
12
Use MTOD
3
Not used
1
2
01/07/1994
10
Use MTOD
01/01/1989
01/04/1989
1
1
01/04/1985
1
Not used
1
1
01/11/1989
01/03/1994
4
9
Use MTOD
01/04/1997
01/04/1997
Series 25. Traffic Signals (Cont'd)
Volume 3 - Electrical Contract
Design, Estimating & Documentation
D-15
March 2009
Std. Dwgs. & Std. Specs. Implementation
D.3
D.3 – List of Standard Specifications
List of Standard Specifications
D.3.1
Introduction
This section lists the standard specifications used in MTO contracts. The following describes the headings
on the list of standard specifications.
D.3.2
OPSS Number
Every standard specification is assigned a unique number which allows for addition to the system.
D.3.3
Title
Every standard specification has a unique title.
D.3.4
Date of Specification
When a standard specification is published, it is dated. Each subsequent revision to the standard
specification is identified by a new date. To make reference to a specific standard specification, it is
important to specify the date and the standard specification number.
D.3.5
MTO Implementation Date
The standard specifications are not automatically implemented for use in MTO contracts upon publication.
In order to allow for sufficient notice for tender package preparation and changes to the contract
documents and drawings, where necessary, the implementation date of a standard specification may be
established after publication.
The implementation date chosen depends on the extent of changes required and is subject to the policy
contained in Quality and Standards Directive C-13. The implementation date shown corresponds to the
earliest tender advertising date of the contracts which must include the new or revised standard drawing. It
is advisable to retain the superseded standard in the Standard Specification Manual until the revised
standard specification is implemented.
D.3.6
OPSS Manual Revision Number
Revisions, additions and deletions to the Standard Specifications Manual are accompanied by a Manual
Revision Information Sheet. Information sheets are sequentially numbered. Besides giving instructions as
to which specifications are revised, added or cancelled, information sheets usually contain information
describing, in detail, the changes made to the standard specifications. The manual revision number is listed
in this section to facilitate locating the appropriate manual revision information sheet when information
regarding the nature of the changes is required. By checking this column, one can determine if the Standard
Specifications Manual used is up-to-date.
D-16
March 2009
Volume 3 - Electrical Contract
Design, Estimating & Documentation
D.3 – List of Standard Specifications
Std. Dwgs. & Std. Specs. Implementation
Title
OPSS
Number
PROV106
General Specification for Electrical Work
Division 1.
General
OPSS
Number
602
Title
Construction Specification for the Installation of
Electrical Chambers
603
Construction Specification for the Installation of
Ducts
604
Construction Specification for Cable Installations
609
Construction Specification for Grounding
610
Construction Specification for Removal of
Electrical Equipment
611
Construction Specification for the Installation of
Underpass Luminaires
614
Construction Specification for the Installation of
Power Supply Equipment
615
Construction Specification for Pole Erection
616
Construction Specification for Concrete Footings
and Concrete Pads for Electrical Equipment
617
Construction Specification for the Installation of
Roadway Luminaires
620
Construction Specification for Traffic Signal
Equipment
621
Construction Specification for Electrical Traffic
Control Devices
622
Construction Specification for the Installation of
Traffic Signal Controllers
623
Construction Specification for Traffic Actuation
Equipment
624
Construction Specification for Traffic Signal
Interconnection Equipment
630
Construction Specification for Installation of
Sectional Steel High Mast Lighting Poles
631
Construction Specification for Concrete Footings
and Maintenance Platforms for High Mast Lighting
Poles
Division 6. Electrical.
OPSS
Number
913
Title
Construction Specification for Embedded Work in
Structure for Electrical Systems
Division 9. Structural
Volume 3 - Electrical Contract
Design, Estimating & Documentation
Date of
Spec.
Nov. 2008
MTO Implementation Date
12/03/2009
MTO Implementation Date
OPSS Man'l
Rev. #
79
Date of
Spec.
Nov. 2008
12/03/2009
OPSS Man'l
Rev. #
79
Nov. 2008
12/03/2009
79
Nov. 2008
Nov. 2008
Nov. 2008
12/03/2009
12/03/2009
12/03/2009
79
79
79
Nov. 2008
12/03/2009
79
Nov. 2008
12/03/2009
79
Nov. 2008
Nov. 2008
12/03/2009
12/03/2009
79
79
Nov. 2008
12/03/2009
79
Sep. 1984
01/04/1985
1
Sep. 1984
01/04/1985
1
Sep. 1984
01/04/1985
1
Jan. 1990
01/06/1990
5
Sep. 1984
01/04/1985
1
Nov. 2008
12/03/2009
79
Nov. 2008
12/03/2009
79
Date of
Spec.
Nov. 2006
MTO Implementation Date
15/03/2007
OPSS Man'l
Rev. #
77
D-17
March 2009
Std. Dwgs. & Std. Specs. Implementation
D.4
D.3 – List of Standard Specifications
MTO Standard Drawings
D.4.1
MTODs
MTODs are either newly developed drawings or revised OPSDs that have not yet been approved and
issued as OPSDs. The implementation of OPSDs and MTODs are included in this chapter. MTODs that
became “implemented OPSDs” are deleted from this manual.
Although MTODs are accessible in CPS and are automatically listed when an item using these drawing is
called for, these drawings should be “cut and pasted” into the contract.
D-18
March 2009
Volume 3 - Electrical Contract
Design, Estimating & Documentation
D.4 – MTO Standard Drawings
Std. Dwgs. & Std. Specs. Implementation
Title
MTOD
Dwg. Date
#
MTO
Implementation Date
Dwg.
Rev. #
2100.070
Steel Encased Ducts by Subsurface Installation
Feb. 2004
18/02/2004
3
2102.01
Underground Rigid Duct Connection at Concrete
Structure
Oct. 2008
11/12/2008
0
2104.01
RE Ducts Surface Mounted on Structure
Oct. 2008
11/12/2008
0
2117.02
Electrical Handholes General Installation
Requirements
Feb. 2006
04/05/2006
0
2123.01
Electrical Maintenance Holes Entry of Direct Buried
Ducts
Mar. 2001
04/04/2001
2
2123.03
Electrical Handholes Entry of Direct Buried and
Encased Ducts
Oct. 2008
11/12/2008
0
2130.010
Supply Control Cabinet Installation Overhead Services-Top
Entry Metering
Oct. 2008
11/12/2008
7
2130.011
Supply Control Cabinet Installation-Underground
Services – Bottom Entry Metering
Oct. 2008
04/05/2006
3
2130.012
Supply Control Cabinet Installation Overhead ServicesBottom Entry Metering
Oct. 2008
11/12/2008
2
2132.010
Wooden Pad for Controller Cabinet
Oct. 2008
11/12/2008
3
2200.010
Concrete Footing for Base Mounted Lighting and
Signal Poles
Oct. 2008
11/12/2008
2
2200.030
Concrete Footing for Base Mounted Poles Where
Rock is Encountered
Feb. 2006
04/05/2006
4
2200.031
Concrete Footing for Heavy Class Steel and Sectional
Steel Poles Where Rock is Encountered
Feb. 2006
04/05/2006
1
2200.041
Concrete Footing for 1.5m Base Mounted Pedestrian
Pushbutton Pole
Nov. 2007
18/11/2007
3
2200.050
Concrete Footing for Heavy Class Steel and Sectional
Steel Poles in Earth
Nov. 2007
18/11/2007
2
2200.090
Reinforcing Steel for Concrete Footing for Heavy
Class Steel and Sectional Steel Poles in Earth
Feb. 2006
04/05/2006
1
2210.031
High Mast Lighting Pole – Extended Footing Within
Energy Attenuator; Apron
Anchorage Assembly
Nov. 2007
18/11/2007
Nov. 2007
18/11/2007
2215.02
List of Implemented MTODs
Volume 3 - Electrical Contract
Design, Estimating & Documentation
D-19
March 2009
Std. Dwgs. & Std. Specs. Implementation
Title
MTOD
D.4 – MTO Standard Drawings
Dwg. Date
#
2215.025
MTO
Implementation Date
Dwg.
Rev. #
Anchorage Assembly for Heavy Class Steel and
Sectional Steel Poles
High Mast Lighting Pole Maintenance Platform
Layout and Detail – Corrugated Steel Pipe
High Mast Lighting Pole Maintenance Platform
Layout Prefabricated Steel
High Mast Lighting Pole Maintenance Platform
Details - Prefabricated Steel
High Mast Lighting Pole Maintenance Platform
Details - Prefabricated Steel
Feb. 2006
04/05/2006
Jan. 2007
15/03/2007
Jan. 2007
15/03/2007
Jan. 2007
15/03/2007
Jan. 2007
15/03/2007
2236.010
Wood Pole and Guy Anchorage settings in Solid Rock
Mar. 2001
04/04/2001
2245.020
Minimum Vertical Clearance for Aerial Cable System
Nov. 2007
18/11/2007
2250.020
Truss Bracket Mounting Details
Mar. 2001
04/04/2001
2255.040
Pole Wiring Diagram, Lighting Pole on Bridge
Structure
Mar. 2001
04/04/2001
2300.020
Rigid PVC Junction Box Type P2
Mar. 2001
04/04/2001
2300.030
Rigid PVC Junction Box Type P4
Mar. 2001
04/04/2001
2302.040
Embedded Work in Structure – New Jersey Type
Concrete Barrier Wall
Oct. 2008
11/12/2008
0
2433.010
Base Plate for Heavy Class Steel Pole
Feb. 2006
04/05/2006
1
2433.011
Base Plate for Heavy Class Sectional Steel Pole
Feb. 2006
04/05/2006
1
2435.010
Octagonal and Round Heavy Class Steel Pole
Jan. 2007
15/03/2007
2
2435.020
Heavy Class Sectional Steel Pole
Jan. 2007
15/03/2007
2
2440.010
Supply Control Cabinet Assembly Type 1, 120/240V,
100A, 1-Phase, 3-Wire
Feb. 2005
11/05/2005
3
2440.020
Supply Control Cabinet Assembly Type 3, 120/208V,
100A, 3-Phase, 4-Wire
Feb. 2005
11/05/2005
2
2440.021
Supply Control Cabinet Assembly Type 3, 600/347V,
100A, 3-Phase, 4-Wire
Jan. 2007
15/03/2007
2440.030
Supply Control Cabinet Assembly Type 1 and 2
Enclosure
Oct. 2008
11/12/2008
2440.040
Pole Mounting Bracket For Supply Control Cabinet Ass’y
Feb. 2004
18/02/2004
2440.051
Supply Control Cabinet Ass’y Type 1 & 2 , Barrier Details
Feb. 2004
18/02/2004
2440.061
Supply control Cabinet Assembly Type 1, 2 & 3, 3Point Stainless Steel Door Handle
Feb. 2004
18/02/2004
2441.000
Supply Control Cabinet Assembly Type 1, 120/240V,
100A, 1-Phase, 3-Wire
Feb. 2005
11/05/2005
2218.020
2218.030
2218.031
2218.032
1
1
1
4
List of Implemented MTODs.
D-20
March 2009
Volume 3 - Electrical Contract
Design, Estimating & Documentation
D.4 – MTO Standard Drawings
Std. Dwgs. & Std. Specs. Implementation
Title
MTOD
Dwg. Date
#
MTO
Implementation Date
Dwg.
Rev. #
2441.010
Supply Control Cabinet Assembly Type 3 Enclosure
Oct. 2008
11/12/2008
2
2441.020
Supply Control Cabinet Assembly Type 3 Dead Front
Panels
Feb. 2005
11/05/2005
0
2441.030
Supply Control Cabinet Assembly Type 3 3-Point
Door Latch
Feb. 2005
11/05/2005
2450.011
High Mast Lighting Pole – 25, 30, and 35 m, 8-sided
Pole
Nov. 2007
18/11/2007
2450.021
High Mast Lighting Pole –40, and 45 m, 12-sided Pole
Nov. 2007
18/11/2007
2453.020
High Mast Lighting Pole Luminaire and Handhole
Orientation
Feb. 2004
18/02/2004
2453.021
High Mast Lighting Pole Luminaire and Handhole
Orientation for Median Mounting Poles
Feb. 2004
18/02/2004
2453.070
High Mast Lighting Pole – Luminaire Support Ring
Feb. 2009
12/03/2009
2510.011
Uninterruptible Power Supply (UPS) Cabinet Pole
Mounted
Nov. 2007
20/12/2007
0
2514.01
Controller Cabinet on Pad
Oct. 2008
11/12/2008
0
2514.011
Traffic Signal Cabinet and Uninterruptible Power
Supply (UPS) Cabinet on Concrete Pad
Oct. 2008
11/12/2008
1
2514.021
Concrete Pad for Traffic Signal Control Cabinet and
Uninterruptible Power Supply (UPS) Cabinet
Nov. 2007
20/12/2007
0
2524.01
Traffic Signal Double Arm Bracket
Oct. 2008
11/12/2008
0
2528.020
Traffic Signal Cabinet Modifications to Accommodate
UPS Control Unit and UPS System
Nov. 2007
20/12/2007
0
2528.021
Traffic Signal Cabinet Wiring Diagram to
Accommodate UPS Control Unit and UPS System
Nov. 2007
20/12/2007
0
2529.11
Typical Traffic Signal Wiring Details Two to Eight
Phase Systems
Mar. 2001
04/04/2001
1
2529.120
Signal Wiring Using 7/C Cable Connected Radially, 2
- 8 Phase
Mar. 2001
04/04/2001
1
2532.01
Flasher Beacon and Downlight for Roadway Sign and
Wiring Diagram
Mar. 2001
04/04/2001
2532.020
Flasher Beacon for Roadway Sign and Wiring
Diagram
Mar. 2001
04/04/2001
2534.010
Sign Light Assembly for Keep Right Sign and Wiring
Diagram
Mar. 2001
04/04/2001
2536.010
Flasher Beacons for Roadway Sign and Downlight and
Wiring Diagram
Mar. 2001
04/04/2001
Volume 3 - Electrical Contract
Design, Estimating & Documentation
4
D-21
March 2009
Std. Dwgs. & Std. Specs. Implementation
List of Implemented MTODs (Cont'd).
D-22
March 2009
D.4 – MTO Standard Drawings
Volume 3 - Electrical Contract
Design, Estimating & Documentation
D.4 – MTO Standard Drawings
Std. Dwgs. & Std. Specs. Implementation
Title
MTOD
Dwg. Date
#
MTO
Implementation Date
Dwg.
Rev. #
2536.020
Flasher Beacons for Roadway Sign and Wiring
Diagram
Mar. 2001
04/04/2001
2536.030
Solar Flasher Beacons for Roadway signs and Wiring
Diagram
Nov. 2007
18/11/2007
2540.01
Aerial Traffic Signal Installation
Mar. 2001
04/04/2001
1
2550.010
Installation of Aerial Interconnection Cables at Terminal
Board
Feb. 2004
18/02/2004
2
2555.010
Flexible Utility Marker
Oct. 2008
11/12/2008
0
2558.000
Pole for Pedestrian Pushbutton
Oct. 2008
11/12/2008
3
2901.0210
Traffic Data Collection, Data Stations, Traffic
Counting Station Type 1
Traffic Data Collection, Data Stations, Traffic
Counting Station Type 2
Traffic Data Collection, Data Stations, Permanent Data
Collection Station, General Layout
Traffic Data Collection, Controller Configuration,
Permanent Data Collection, Cabinet and Equipment
Traffic Data Collection, Controller Configuration,
Permanent Data Collection, Cabinet Configuration
Traffic Data Collection, Controller Configuration,
Permanent Data Collection, Typical 2- to 4-Lane
Wiring
Traffic Data Collection, Controller Configuration,
Permanent Data Collection, Typical 2- to 8-Lane
Wiring
Traffic Data Collection, Controller Configuration,
Permanent Data Collection, Typical 2- to 12-Lane
Wiring
Traffic Data Collection, Controller Configuration,
Permanent Data Collection, Typical 13- to 24-Lane
Wiring
Traffic Data Collection, Detector Loops, General
Installation 1
Traffic Data Collection, Detector Loops, General
Installation 2
Traffic Data Collection, Detector Loops, General,
Splices for Cables
Prefabricated Detector Loop
Oct. 2008
12/03/2009
0
Oct. 2008
12/03/2009
0
Oct. 2008
12/03/2009
0
Oct. 2008
12/03/2009
0
Oct. 2008
12/03/2009
0
Oct. 2008
12/03/2009
0
Oct. 2008
12/03/2009
0
Oct. 2008
12/03/2009
0
Oct. 2008
12/03/2009
0
Oct. 2008
12/03/2009
0
Oct. 2008
12/03/2009
0
Oct. 2008
12/03/2009
0
Oct. 2008
12/03/2009
0
Traffic Data Collection, Detector Loops, General,
Heavy Duty Rubber
Traffic Data Collection, Detector Loops, Permanent
Data Collection Station, Details, Main Loop
Oct. 2008
12/03/2009
0
Oct. 2008
12/03/2009
0
2901.0220
2901.0610
2901.2610
2901.2620
2901.2630
2901.2640
2901.2650
2901.2660
2901.4010
2901.4020
2901.4030
2901.4040
2901.4050
2901.4610
List of Implemented MTODs (Cont'd).
Volume 3 - Electrical Contract
Design, Estimating & Documentation
D-23
March 2009
Std. Dwgs. & Std. Specs. Implementation
Title
MTOD
D.4 – MTO Standard Drawings
Dwg. Date
#
2901.4620
2901.5010
2901.5020
2901.5030
2901.5040
2901.5050
2901.5210
2901.5220
2901.5230
2901.5240
2901.5250
2901.5260
2901.5410
2901.5420
2901.5430
2901.5440
2901.5450
Traffic Data Collection, Detector Loops, Permanent
Data Collection Station, Layout, Main and Axle Loop
Placement
Traffic Data Collection, Detector Loops, Traffic
Counting Station, Layout, 2-Lane/2-Way Highway
Traffic Data Collection, Detector Loops, Traffic
Counting Station, Layout, 2-Lane/1-Way Highway
Traffic Data Collection, Detector Loops, Traffic
Counting Station, Layout, 2-Lane Ramp
Traffic Data Collection, Detector Loops, Traffic
Counting Station, Layout, 1-Lane Ramp
Traffic Data Collection, Detector Loops, Traffic
Counting Station, Layout, 3-Lane/1-Way Highway
Traffic Data Collection, Detector Loops, Traffic
Counting and Vehicle Length Inventory Station,
Layout, 2-Lane/2-Way Highway
Traffic Data Collection, Detector Loops, Traffic
Counting and Vehicle Length Inventory Station,
Layout, 2-Lane/2-Way Highway High Congestion
Traffic Data Collection, Detector Loops, Traffic
Counting and Vehicle Length Inventory Station,
Layout, 2-Lane/1-Way Highway
Traffic Data Collection, Detector Loops, Traffic
Counting and Vehicle Length Inventory Station,
Layout, 2-Lane/1-Way Highway High Congestion
Traffic Data Collection, Detector Loops, Traffic
Counting and Vehicle Length Inventory Station,
Layout, 3-Lane/1-Way Highway
Traffic Data Collection, Detector Loops, Traffic
Counting and Vehicle Length Inventory Station,
Layout, 3-Lane/1-Way Highway High Congestion
Traffic Data Collection, Detector Loops, Permanent
Data Collection Station, Layout, 2-Lane/2-Way
Highway
Traffic Data Collection, Detector Loops, Permanent
Data Collection Station, Layout, 4-Lane/2-Way
Highway
Traffic Data Collection, Detector Loops, Permanent
Data Collection Station, Layout, 6-Lane/2-Way
Highway
Traffic Data Collection, Detector Loops, Permanent
Data Collection Station, Layout, 8-Lane/2-Way
Highway
Traffic Data Collection, Detector Loops, Permanent
Data Collection Station, Layout, 5-Lane/1-Way
Highway
MTO
Implementation Date
Dwg.
Rev. #
Oct. 2008
12/03/2009
0
Oct. 2008
12/03/2009
0
Oct. 2008
12/03/2009
0
Oct. 2008
12/03/2009
0
Oct. 2008
12/03/2009
0
Oct. 2008
12/03/2009
0
Oct. 2008
12/03/2009
0
Oct. 2008
12/03/2009
0
Oct. 2008
12/03/2009
0
Oct. 2008
12/03/2009
0
Oct. 2008
12/03/2009
0
Oct. 2008
12/03/2009
0
Oct. 2008
12/03/2009
0
Oct. 2008
12/03/2009
0
Oct. 2008
12/03/2009
0
Oct. 2008
12/03/2009
0
Oct. 2008
12/03/2009
0
List of Implemented MTODs (Cont'd).
D-24
March 2009
Volume 3 - Electrical Contract
Design, Estimating & Documentation