ESL-Spectrum
1591 N Harding Street
Indianapolis IN 46202
Phone: (317) 951-2300
Fax: (317) 951-2310
Date: Jan 26, 2016
Job Name
IndyGo - Facility Upgrades Project
INDY16-44005
Indianapolis IN
Bid Date
Feb 10, 2016
Submittal Date
Jan 26, 2016
Engineer:
Parsons Brinckerhoff
300 N Meridian St
Indianapolis IN 46204
Date: Jan 26, 2016
Page 1/1
Transmittal
Project
IndyGo - Facility Upgrades Project
INDY16-44005
Quote#
Location Indianapolis IN
Contact:
ESL-Spectrum
1591 N Harding Street
Indianapolis IN 46202
Phone: (317) 951-2300
From: Scott Parkinson
ATTACHED WE ARE SENDING YOU 1 COPY OF THE FOLLOWING ITEM:
Drawings
Specifications
Other:
Prints
Information
Plans
Submittals
THESE ARE TRANSMITTED FOR:
Prior Approval
Approval
Approval as Submitted
Approval as Noted
Type
FF00009
Resubmittal for Approval
Corrections
Your Use
Review and Comment
Record
Bids due on:
Other:
MFG
Part
B
C
F1
F2
F3
F4
G
H
K
M
N
P
P1
Columbia Lighting
Columbia Lighting
Beacon Products
Beacon Products
Kim Lighting, Inc.
Kim Lighting, Inc.
Columbia Lighting
Kurtzon Lighting
Prescolite
Columbia Lighting
Hubbell Lighting, Inc.
Hubbell Lighting, Inc.
Hubbell Lighting, Inc.
S1
W1
Beacon Products
W2
W3
Beacon Products
Beacon Products
LXEM4-50LW-RFA-EU
LCL4-50ML-EU-CHSC
AL/X-60NB/136-5K-6X6-UNV-SF3-X
AL/X-24NB/55-5K-2X2-UNV-SF3-X
ARFX25WF-5K-45-UV-DB-X
EL700F3/7L5KUV/X
LBIL4-40ML-EDU-ELL14
WL-LP-X-2-40-X/LEDR40-UNV
LC6LED-277-6LCLED-6-40K-8-B24
LJT14-40HLG-FAA12-EDU
NRG-406-2
HBLHO-72LU-A2-5K-W-092-CD-X
HBLHO-72LU-A2-5K-W-092-CD-XOCS360
TRV/X-24NB/27-5K-T3-UNV-DBT
A670TSRLED991/480WB/4ARC45T3/
MDL03/SRR1HSS/BKT
TRV/X-48NB/110-5K-T3-UNV-PEC-DBT
TRV/X-48NB/110-5K-T3-UNV-DBT
Sternberg Vintage Lighting
Page 1/1
Catalog Number:
LXEM4-50LW-RFA-EU
Submitted by ESL-Spectrum
Job Name:
IndyGo - Facility Upgrades Project
Engineer: Parsons Brinckerhoff
(Indianapolis)
Type:
B
Notes:
INDY16-44005
LXEM
Enclosed and Gasketed Fiberglass Extreme Environment / LED
PROJECT INFORMATION
FEATURES
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
LED Enclosed and Gasketed
Long life 60,000 hour LEDs at L80 for reduced maintenance
Four LED color choices and 80 CRI
IP66 all sizes when ordered with standard polyacetal (POM)
latches
IP65 all sizes, IP67 4' and 8'
Available in 2', 4', or 8' lengths
Fiberglass housing with F1 weatherability rating, standard
Smooth housing for easy cleaning
Gasket is non-porous to ensure seal
Impact modified acrylic lens equivalent to 100% DR
Wide range of lens selections
Lens firmly secured with tamper resistance ready
polyacetal (POM) latches
Stainless steel latching optional
Removable gear tray electrical access for modular replaceability
Emergency battery pack installed, optional on most models
Standard ambient -20°C to 25°C
Elevated ambient option on most models
DesignLights Consortium® qualified
Includes surface mounting brackets
Occupancy and/or daylight sensing accessories available
Available with exclusive wiHUBB technology preinstalled
Five year warranty
Project Name
Type
Catalog No.
Date
CONSTRUCTION
Housing is formed from UL 5VA fiberglass.
F1 weatherability rating, suitable for indoor or
outdoor use with respect to exposure to UV light.
Pour-in-place non-porous gasketing assures seal.
LED affixed to removable heat sinked gear tray. 14
Latches per 8', 8 per 4', 6 per 2'. Latches are provided
tamper resistance ready, tamper resistant screws
by others. Latches are standard polyacetal (POM),
optional in stainless steel. Access openings are
provided for electrical connection.
SHIELDING
Lineal ribbed frosted acrylic lens impact modified
equivalent to 100% DR; modification adds flexibility
to reduce impact breakage compared to standard
acrylic formulations. Optional ribbed polycarbonate
lens or deep acrylic. All lenses available in clear or
frost.
ELECTRICAL
Long-life LEDs are rated for 60,000 hours at L80
lumen maintenance. Extra High Lumen packages
(XL) rated L70 at 60,000 hours. Driver options
include fixed output for on/off function, step
dimming4 (high/low/off) or continuous 0-10V
dimming. QR code label affixed to housing for easy
traceability.
CERTIFICATION
All luminaires are built to UL 1598 and 2108
standards, and bear appropriate CSA labels.
Ingress protection IP65 and IP67 standard. UL
Sanitation certified. Wet location labeling is
standard. Emergency-equipped fixtures built to
UL 924. DesignLights Consortium® (DLC) qualified.
Please refer to the DLC website for specific product
qualifications at www.designlights.org.
WARRANTY
Five year warranty (Terms and Conditions Apply).
FINISH
White painted parts are treated with a five-stage
phosphate bonding process and finished with high
reflectance baked enamel.
ORDERING INFORMATION
LXEM
EXAMPLE LXEM4-35HL-RFA-EDU
–
MODEL
–
COLOR TEMP
LXEM LED Enclosed
and Gasketed
30
35
40
50
SIZE
2 2' 1,2,6,7
4 4'
8 8'
3000K
3500K
4000K
5000K
LUMEN OUTPUT
LW
ML
HL
VL
XL
SHIELDING
RFA
RA
DFA
DCA
RFP
Low Watt
Medium Lumen
High Lumen1
Very High Lumen
Xtra High Lumen2, 5
SENSOR KITS (Order Separately)
All sensor kits include Occupancy & Daylight.
Daylight activation requires setting of dip-switches on site.
Catalog # # Relays Lens Type Voltage Wet Label
OS1360WLK
1
360°
120/277
Yes
120V/
OS2360WLK
2
360°
120/277
Yes
277V
OS1AWLK
1
Aisle
120/277
Yes
OS2AWLK
2
Aisle
120/277
Yes
HL not available in 2' size with HT option.
Not available with battery pack.
3
2' and 4' only. 8' not available.
4
Only available on 4' and 8' LW and
ML Lumen package.
Not available with HT.
Not available with XL lumen package.
Not available with VL lumen package.
8
Requires 3⁄8" OD threaded rod by others.
9
2 required for 8' fixture
1
5
2
6
Page 1/3 Rev. 08/11/15
7
U
–
Ribbed Frosted Acrylic
Ribbed Clear Acrylic
Deep Frosted Acrylic
Deep Clear Acrylic
Ribbed Frosted
Polycarbonate3
DRIVER
–
VOLTAGE
E Fixed Output
ESD Step Dimming4,5
ED 0-10V Dimming
U 120V-277V
PRODUCT AVAILABILITY
Size
2'
4'
8'
Lumen
Package
Nominal
Lumen
Range
(DFA Lens)
Nominal
Watts
Lumens/
Watt
(Highest)
Max Temp,
HT Option
LW
ML
HL
LW
ML
HL
VL
XL
LW
ML
HL
VL
XL
3150-3500
4300-4750
4850-5350
4050-4450
4850-5350
5800-6400
7350-8150
9750-10750
8100-8900
9700-10700
11600-12800
14700-16300
19500-21500
29
43
51
36
47
52
68
102
72
94
104
136
204
121
110
105
124
114
123
120
105
124
114
123
120
105
40°C
40°C
25°C
50°C
50°C
45°C
40°C
25°C
50°C
50°C
45°C
40°C
25°C
Lumens vary according to color temperatures and other factors. See specific
photometric test(s). Output levels based on the DFA lens option.
© 2015 Columbia Lighting, a division of Hubbell Lighting, Inc. Specifications subject to change without notice.
701 Millennium Blvd. Greenville, SC 29607 / Tel 864.678.1000 / Website www.columbialighting.com
OPTIONS
GLR Fast Blow Fuse
SSL Stainless Steel Tamper Resistance
Ready Latches
TP Tamper Proof Latches
ELL14 Emergency Battery Pack Installed,
1400 Lumens6
F3C8W 3 Wire 8' Wet Cord
F3C15W 3 Wire 15' Wet Cord
SWH Single Wet Hub 1⁄2" NPT Hub
DWH Dual Wet Hub 1⁄2" NPT Hub
XEDPM Dual Pendant Brackets (pendant by others)8
WIH wiHUBB Enabled
HT Elevated Ambient 1,2,6
ACCESSORIES
(ORDER SEPARATELY)
XEHC Chain Hanger Kit
(Includes 14" Chain)
XE45MB 45° Mounting Bracket9
XE45MBSS 45° Stainless Steel
Mounting Bracket
LED / LXEM
Catalog Number:
LXEM4-50LW-RFA-EU
Submitted by ESL-Spectrum
Job Name:
IndyGo - Facility Upgrades Project
Engineer: Parsons Brinckerhoff
(Indianapolis)
Type:
B
Notes:
INDY16-44005
LXEM
Enclosed and Gasketed Fiberglass Extreme Environment / LED
PHOTOMETRIC DATA
LUMINAIRE DATA
Luminaire
Ballast
Ballast Factor
Lamp
Fixture Lumens
Watts
Mounting
Shielding Angle
Spacing Criterion
Luminous Opening
in Feet
Test 14.00242 Test Date 8/29/14
ZONAL LUMEN SUMMARY
LXEM4-40ML-DFA-EU
LXEM LED Enclosed and Gasketed,
Industrial. 7" x 51" LED with deep
frosted acrylic diffuser
D15CC55UNVTC
1.00
LED
5383
47.00
Surface
0º = 90 90º = 90
0º = 1.25 90º = 1.30
Length: 4.25
Width: 0.50
Height: 0.33
Zone
0-30
INDOOR CANDELA PLOT
Lumens % Lamp % Fixt.
1297
24.1
24.1
0-40
2127
39.5
39.5
0-60
3824
71.0
71.0
0-90
5105
94.8
94.8
0-180
5383
100.0
100.0
180
165
150
135
1700
120
850
105
90
ENERGY DATA
Total Luminaire Efficiency
100%
Total Lumens per Watt
ANSI/IESNA RP-1-2004
Compliance
Comparative Yearly Lighting
Energy Cost per 1000 Lumens
115
75
850
Noncompliant
$2.09 based on
3000 hrs. and
$0.08 per KWH
60
1700
0
0.0
15
30
Horiz 0-180
45.0
45
90.0
Test 14.00117 Test Date 9/9/14
LUMINAIRE DATA
Luminaire
Ballast
Ballast Factor
Lamp
Fixture Lumens
Watts
Mounting
Shielding Angle
Spacing Criterion
Luminous Opening
in Feet
ZONAL LUMEN SUMMARY
LXEM4-40HL-DFA-EU
LXEM LED Enclosed and Gasketed,
Industrial
7" x 51" LED with deep frost ribbed
acrylic diffuser
D15CC55UNVTC
1.00
LED
6182
51.80
Surface
0º = 90 90º = 90
0º = 1.25 90º = 1.29
Length: 4.17
Width: 0.50
Height: 0.29
Zone
0-30
INDOOR CANDELA PLOT
Lumens % Lamp % Fixt.
1493
24.2
24.2
0-40
2450
39.6
39.6
0-60
4399
71.2
71.2
0-90
5863
94.8
94.8
0-180
6182
100.0
100.0
180
165
150
135
2000
120
1000
105
ENERGY DATA
90
Total Luminaire Efficiency
100%
Total Lumens per Watt
ANSI/IESNA RP-1-2004
Compliance
Comparative Yearly Lighting
Energy Cost per 1000 Lumens
119
Noncompliant
$2.02 based on
3000 hrs. and
$0.08 per KWH
75
1000
60
2000
0
0.0
15
30
Horiz 0-180
45.0
45
90.0
Test 14.00224 Test Date 8/29/14
LUMINAIRE DATA
Luminaire
Ballast
Ballast Factor
Lamp
Fixture Lumens
Watts
Mounting
Shielding Angle
Spacing Criterion
Luminous Opening
in Feet
ZONAL LUMEN SUMMARY
LXEM4-40VL-DFA-EU
LXEM LED Enclosed and Gasketed,
Industrial
7" x 51" LED with deep frosted acrylic
diffuser
D23CC90UNVTF
1.00
LED
7876
67.70
Surface
0º = 90 90º = 90
0º = 1.24 90º = 1.29
Length: 4.25
Width: 0.50
Height: 0.25
Zone
0-30
Lumens % Lamp % Fixt.
1899
24.1
24.1
39.5
0-40
3114
39.5
0-60
5588
71.0
71.0
0-90
7461
94.7
94.7
0-180
7876
100.0
100.0
INDOOR CANDELA PLOT
180
165
150
135
2600
120
1300
105
ENERGY DATA
Total Luminaire Efficiency
100%
Total Lumens per Watt
ANSI/IESNA RP-1-2004
Compliance
Comparative Yearly Lighting
Energy Cost per 1000 Lumens
116
Noncompliant
90
75
1300
$2.07 based on
3000 hrs. and
$0.08 per KWH
60
2600
0
Page 2/3 Rev. 08/11/15
© 2015 Columbia Lighting, a division of Hubbell Lighting, Inc. Specifications subject to change without notice.
701 Millennium Blvd. Greenville, SC 29607 / Tel 864.678.1000 / Website www.columbialighting.com
0.0
15
30
Horiz 0-180
45.0
45
90.0
LED / LXEM
Catalog Number:
LXEM4-50LW-RFA-EU
Submitted by ESL-Spectrum
Job Name:
IndyGo - Facility Upgrades Project
Engineer: Parsons Brinckerhoff
(Indianapolis)
Type:
B
Notes:
INDY16-44005
LXEM
Enclosed and Gasketed Fiberglass Extreme Environment / LED
DIMENSIONAL DATA
See Table
67⁄9"
67⁄9"
22⁄5"
22⁄5"
55⁄8"
43⁄8"
RFA Lens: 2', 4', 8', RFP Lens: 2', 4'
LXEM LENGTH DIMENSIONS
SIZE
LENS
LENGTH
2'
RFA
RFP
DFA
272⁄3"
272⁄3"
272⁄3"
DFA Lens: 2', 4', 8'
SIZE
LENS
LENGTH
4'
RFA
RFP
DFA
512⁄3"
512⁄3"
512⁄3"
SIZE
LENS
LENGTH
8'
RFA
RFP
DFA
100"
N/A
100"
NOTE: All dimensions are in inches; dimensions and specifications are subject to change without notice. Please consult factory or check sample for verification.
Page 3/3 Rev. 08/11/15
© 2015 Columbia Lighting, a division of Hubbell Lighting, Inc. Specifications subject to change without notice.
701 Millennium Blvd. Greenville, SC 29607 / Tel 864.678.1000 / Website www.columbialighting.com
LED / LXEM
Catalog Number:
LCL4-50ML-EU-CHSC
Submitted by ESL-Spectrum
Job Name:
IndyGo - Facility Upgrades Project
Engineer: Parsons Brinckerhoff
(Indianapolis)
Type:
C
Notes:
INDY16-44005
LCL
Lensed Striplight / LED
PROJECT INFORMATION
•
•
•
•
•
•
•
•
•
•
•
•
Type
Catalog No.
Date
CONSTRUCTION
FEATURES
•
•
•
•
•
Project Name
LED technology in a lensed striplight
Long life 50,000 hour LEDs at L80 for reduced maintenance
Up to 110 lumens per watt
Choice of four LED color temperatures
Superior color consistency within a 3-step MacAdam ellipse
and greater than 80 CRI
Choice of four lumen packages per size
Available in 2', 4' or 8' lengths
Optional integral emergency battery pack
Heavy die-formed steel channel with 100% acrylic formed
diffuser
Fully assembled fixture for quick installation
LED boards and driver accessible for future maintenance
or upgrades
Modular replaceable LED components
Surface mount or suspended
Maximum temperature 35°C on all lumen
packages up to HL
DesignLights Consortium® (DLC) qualified
Five year warranty
Maximum temperature 35 (degree) C on all lumen packages
up to HL
MODEL
SIZE
2 2'
4 4'
8 8'
COLOR TEMP
30
35
40
50
3000K
3500K
4000K
5000K
All luminaires are built to UL 1598 and 2108
standards, and bear appropriate CSA c/US labels.
Damp location labeling is standard. Emergency
equipped fixtures labeled UL924. Adheres to LM70,
LM80, and TM21 industry standards. Designlights
Consortium® (DLC) qualified. Please refer to the DLC
website for specific product qualifications at www.
designlights.org.
FINISH
White painted parts are treated with a five-stage
phosphate bonding process and finished with
high reflectance baked enamel. For a post-painted
housing finish select PAF option.
WARRANTY
Five year warranty (Terms and Conditions apply).
ELECTRICAL
Long-life LEDs are rated for 50,000 hours at L80
lumen maintenance. Driver options include fixed
output for on/off function, step dimming (high/low/
off) or continuous 0-10V dimming.
ORDERING INFORMATION
–
LCL
LCL LED Striplight
CERTIFICATION
Housing, wireway, and ends are formed from
code-gauge steel. Housing components act as
heat sink for LED heat dissipation. Knockouts
are provided for electrical access and mounting.
Shielded with 100% frosted prismatic acrylic lens.
EXAMPLE LCL4-40HL-EU
U
–
LUMEN OUTPUT
LW
ML
HL
VL
Low Watt
Medium Lumen
High Lumen
Very High Lumen
See Product Availability
Table below.
DRIVER
E
ESD
ED
ED1
Fixed Output
Step Dimming
0-10V Dimming
0-10V 1%
Dimming
LUTH Lutron H Series3
LUT5 Lutron 5 Series3
ACCESSORIES
(ORDER SEPARATELY)
S18
SS18
CSHC
LCLWG4
18" Stem, Canopy
18" Swivel Stem—45° Swivel
Chain Hanger Assembly
4' Wire Guard, 2 Required for 8'
Fixture
VOLTAGE
U 120V-277V
347 347V
(E,ED,ED1
only)
For compatibility with Dual-Lite LiteGear® inverters in lieu of installed battery pack, contact Hubbell Lighting representative.
Not available in 2 ft size.
3
Not available in VL packages.
2
Page 1/2 Rev. 12/23/15
© 2015 Columbia Lighting, a division of Hubbell Lighting, Inc. Specifications subject to change without notice.
701 Millennium Blvd. Greenville, SC 29607 / Tel 864.678.1000 / Website www.columbialighting.com
OPTIONS
ELL14 Emergency Battery Pack,
1400 Lumens1,2
GLR Fast Blow Fuse
PAF Paint After Fabrication
NYC NYC Compliant
PRODUCT AVAILABILITY
SIZE
2'
4'
8'
1
–
LUMEN
PACKAGE
ML
LW
ML
HL
VL
LW
ML
HL
VL
NOMINAL LUMENS
(4000K)
2,500
2,500
5,000
6,100
10,100
5,000
10,100
12,200
20,100
NOMINAL EFFICACY
WATTS
25
100
25
100
48
104
55
110
96
105
48
104
96
105
111
110
193
104
Lumens vary according to color temperature and other factors.
See specific photometric test(s).
LED / LCL
Catalog Number:
LCL4-50ML-EU-CHSC
Submitted by ESL-Spectrum
Job Name:
IndyGo - Facility Upgrades Project
Engineer: Parsons Brinckerhoff
(Indianapolis)
Type:
C
Notes:
INDY16-44005
LCL
Lensed Striplight / LED
PHOTOMETRIC DATA
Test ITL15383 Test Date 7/14/14
LUMINAIRE DATA
Luminaire
Ballast
Ballast Factor
Lamp
Fixture Lumens
Watts
Shielding Angle
Spacing Criterion
Luminous Opening
in Feet
INDOOR CANDELA PLOT
ZONAL LUMEN SUMMARY
LCL4-40HL-ED
LCL Led Lensed Utility
Channel, Industrial
48" x 41⁄2 x 313⁄16" LED with
acrylic formed lens
D15CC55UNVTC
1.00
LED
6078
54.70
0º = 90 90º = 90
0º = 1.24 90º = 1.28
Length: 4.00
Width: 0.40
Height: 0.00
Zone
Lumens
Lamp
Fixt.
0-30
0-40
0-60
0-90
0-180
1649
2679
4574
5860
6078
27.1
44.1
75.2
96.4
100.0
27.1
44.1
75.2
96.4
100.0
180
165
150
135
2200
120
1100
ENERGY DATA
105
Total Luminaire Efficiency
100.0
Total Lumens per Watt
ANSI/IESNA RP-1-2004 Compliance
Comparative Yearly Lighting Energy
Cost per 1000 Lumens
111
Noncompliant
$2.16 based on
3000 hrs. and
$0.08 per KWH
90
75
1100
60
2200
15
0
0.0
30
Horiz 0-180
45.0
45
90.0
DIMENSIONAL DATA
96"
45⁄8"
A
3"
A
B
48"
B
A
B
A
B
A
A
41⁄2"
41⁄8"
48"
45⁄8"
A
3"
A
B
241⁄8"
A
A
45⁄8"
191⁄8"
A
B
36"
A
313⁄16"
B
A
A - 7/8" Diameter Knockout
B - 5⁄16" x 1⁄2" hole
Note 1: All Non-Shielded (strip) fixtures- Deduct 1/16" from overall dimension for continuous row mounting.
Dimensions shown include end panel.
MOUNTING ACCESSORIES
CSZT
11/2" Space
CSTH
Slide Clamp
Tong Hanger
NOTE: All dimensions are in inches; dimensions
and specifications are subject to change
without notice. Please consult factory or
check sample for verification.
Page 2/2 Rev. 12/23/15
© 2015 Columbia Lighting, a division of Hubbell Lighting, Inc. Specifications subject to change without notice.
701 Millennium Blvd. Greenville, SC 29607 / Tel 864.678.1000 / Website www.columbialighting.com
LED / LCL
Catalog Number:
AL/X-60NB/136-5K-6X6-UNVSF3-X
Submitted by ESL-Spectrum
Job Name:
IndyGo - Facility Upgrades Project
Engineer: Parsons Brinckerhoff
(Indianapolis)
Type:
F1
Notes:
INDY16-44005
Type:
rev. 06.10.2015
Project Name:
ALPHA (LED)
Alpha Floodlight
Max Weight: 27.0 lbs
Max EPA: 1.32 sq ft
Notes:
design . performance . technology
www.beaconproducts.com
Sample
AL-U
Ordering
60NB-136
/
5K
/
A
B
4X4
UNV
/
PEC
/
C
D
/
E
DETAILS
PM
/
F
G
A. MODEL
16 3/8”
11 5/8 ”
14 5/8 ”
26 1/2”
14 5/8 ”
I
F. ELECTRICAL OPTIONS
PEC
AL-U
Alpha, up light
PCR-TL
photocell, twist-lock 1,3
PCR-SC
photocell, shorting cap 1,3
2PF
dual power feed 1,2
photocell, button
24NB-55
55 Watts - LED array
36NB-80
80 Watts - LED array
G. MOUNTING OPTIONS
60NB-136
136 Watts - LED array
WM
wall mount
72NB-170
170 Watts - LED array
PM
3” pier mount
72NB-220
220 Watts - LED array
SF3
2 3/8” OD tenon (std.)
H. SHIELD OPTIONS
11 3/4”
C. CCT - COLOR TEMP
FL
full louver
3K
3000K
FV
full visor
4K
4000K
HL
half louver
5K
5000K (std.)
HV
half visor
2X2
narrow spot
I. COLOR
4X4
narrow flood
BBT
basic black textured
5X5
medium flood
BMT
black matte textured
6X6
wide flood
WHT
white textured
5X3
horizontal flood
MBT
metallic bronze textured
3X5
vertical flood
BZT
bronze textured
DBT
dark bronze textured
GYS
gray smooth
DPS
dark platinum smooth
D. BEAM
8”
Wall Mount (WM)
SHIELD OPTIONS
Full Louver
H
Alpha, down light
20”
Standard SF3 mount
Slips 2 3/8” to 3” O.D. Tenon
BBT
/
AL-D
B. ENGINE-WATTS
9 3/8”
FL
/
Full Visor
E. VOLTAGE
UNV
120-277V
GNT
green textured
347
347V
MST
metallic silver textured
480
480V
MTT
metallic titanium textured
OWI
old world iron
RAL
______________
MOUNTING OPTIONS
11 3/4”
1/2”
Half Visor
16 3/8 ”
1 1/2”
6 1/2”
Half Louver
8”
2041 58th Avenue Circle East Bradenton, fl 34203
Phone: (800) 345-4928
1
not available @ 347V or 480V input
2
available on 24NB-55, 72NB-170, and 72NB-220 only
3
PCR-TL and PCR-SC not available on AL-U
Fax: (941) 751-5535
ORDERING
Submitted by ESL-Spectrum
Job Name:
IndyGo - Facility Upgrades Project
Engineer: Parsons Brinckerhoff
(Indianapolis)
Catalog Number:
AL/X-60NB/136-5K-6X6-UNVSF3-X
Type:
F1
Notes:
INDY16-44005
rev. 06.10.2015
ALPHA (LED)
Alpha Floodlight
Max Weight: 27.0 lbs
Max EPA: 1.32 sq ft
design . performance . technology
Intended Use: The Alpha Luminaire is a high performance “LED” energy and maintenance lighting solution, designed with optical versatility. Markets include large areas
requiring perimeter lighting, security fence lighting, truck terminals, car lots, recreational
sports lighting, airport ramp lighting and building flood-lighting. The Alpha LED luminaire
is intended to be used to reduce energy and maintenance associated with HID legacy
lighting technology.
Construction: The housing, electrical compartment and fitter are made from die cast
aluminum that is pre-treated and powder-coated to meet the most rugged industry standards. The finish is corrosion resistant to meet ASTMB-117, resists cracking or loss of
adhesion per ASTM D522, resists surface impacts of up to 160 inch-pound. All external
hardware is corrosion resistant.
Adjustable cast knuckle: The adjustable knuckle is designed to slip fit 2 3/8” to 3”
O.D. tenon. The knuckle is designed for continuous aiming adjustment without the use
is cast serrations. The cast knuckle uses cast external degree markers for aiming. The
aiming adjustment is design to operate with a single bolt adjustment. The Alpha can
adjust 30-degrees up from Nadir to straight up vertical.
corrosion resistance and resists cracking or loss of adhesion per ASTM D522 and resists
surface impacts of up to 160 inch-pound.
Agency Certification: The luminaire shall bear a CSA label and be marked suitable for
wet locations.
Warranty: Beacon luminaires feature a 5 year limited warranty. Beacon LED luminaires
with LED arrays feature a 5 year limited warranty covering the LED arrays. LED drivers are
covered by a 5 year limited warranty. PIR sensors carry a 5 year limited warranty from the
sensor manufacturer. See Warranty Information on www.beaconproducts.com complete
details and exclusions.
Power/Lumens & Distributions
D.
Delivered
Lumens
LPW
Engine
Beam Angle
Field
Angle
Max
Candela
24NB
17.4 H x 17.2 V
32.3 H x 32.5 V
45,920
55
2x2
5,680
104.5
36NB
17.4 H x 17.2 V
32.3 H x 32.5 V
68,881
80
2x2
8,520
104.5
60NB
17.4 H x 17.2 V
32.3 H x 32.5 V
114,802
136
2x2
14,200
104.5
72NB
17.4 H x 17.2 V
32.3 H x 32.5 V
137,673
170
2x2
17,029
100
72NB
17.4 H x 17.2 V
32.3 H x 32.5 V
164,385
220
2x2
20,333
96.2
24NB
28.1 H x 29.4 V
52.4 H x 51.8 V
18,255
55
4x4
5,627
103.8
36NB
28.1 H x 29.4 V
52.4 H x 51.8 V
27,383
80
4x4
8,440
103.7
60NB
28.1 H x 29.4 V
52.4 H x 51.8 V
46,635
136
4x4
14,066
103.7
72NB
28.1 H x 29.4 V
52.4 H x 51.8 V
54,762
170
4x4
17,039
100
72NB
28.1 H x 29.4 V
52.4 H x 51.8 V
65,349
220
4x4
20,143
95.3
24NB
66.8 H x 67.3 V
97.0 H x 96.3 V
8,342
55
5x5
5,042
91.7
36NB
66.8 H x 67.3 V
97.0 H x 96.3 V
12,514
80
5x5
7,563
92.3
60NB
66.8 H x 67.3 V
97.0 H x 96.3 V
20,856
136
5x5
12,605
92.8
72NB
66.8 H x 67.3 V
97.0 H x 96.3 V
13,347
170
5x5
16,107
95
72NB
66.8 H x 67.3 V
97.0 H x 96.3 V
30,024
220
5x5
18,146
82.5
24NB
72.0 H x 74.9 V
102.2 H x 101.6 V
4,449
55
6x6
5,603
101.8
36NB
72.0 H x 74.9 V
102.2 H x 101.6 V
6,674
80
6x6
8,404
102.5
60NB
72.0 H x 74.9 V
102.2 H x 101.6 V
11,123
136
6x6
14,024
103.3
72NB
72.0 H x 74.9 V
102.2 H x 101.6 V
13,347
170
6x6
17,315
102
72NB
72.0 H x 74.9 V
102.2 H x 101.6 V
16,089
220
6x6
20,260
92.1
Fasteners: All fasteners shall be stainless steel. When tamper resistant fasteners are
required, spanner HD (snake eye) style shall be provided (special tool required, consult
factory).
24NB
56.2 H x 22.7 V
82.3 H x 46.4 V
8,342
55
5x3
5,032
91.6
36NB
56.2 H x 22.7 V
82.3 H x 46.4 V
12,514
80
5x3
7,547
92.3
60NB
56.2 H x 22.7 V
82.3 H x 46.4 V
20,856
136
5x3
12,579
93
Drivers: Luminaires are equipped with an LED driver that accepts 100V through 277V,
50 Hz to 60 Hz (UNV), or a driver that accepts 347V or 480V input. Power factor is .92 at
full load. All electrical components are rated at 50,000 hours at full load and 40-C ambient conditions per MIL-217F Notice 2. Optional 0 to 10 volt dimming drivers are available
upon request. Component-to -component wiring within the luminaire will carry no more
than 80% of rated current and is listed by UL for use at 600VAC at 50°C or higher. Plug
disconnects are listed by UL for use at 600 VAC.
72NB
56.2 H x 22.7 V
82.3 H x 46.4 V
25,027
170
5x3
15,126
89
72NB
56.2 H x 22.7 V
82.3 H x 46.4 V
30,024
220
5x3
18,108
82.5
24NB
22.8 H x 56.1 V
46.7 H x 83.8 V
8,342
55
3x5
5,042
91.6
36NB
22.8 H x 56.1 V
46.7 H x 83.8 V
12,514
80
3x5
7,566
92.3
60NB
22.8 H x 56.1 V
46.7 H x 83.8 V
20,856
136
3x5
12,611
93
Surge Protector: The on-board surge protector shall be a UL recognized component
for the United States and Canada and have a surge current rating of 20,000 Amps using
the industry standard 8/20 pSec wave. The LSP shall have a clamping voltage of 320V
and surge rating of 372J. The case shall be a high-temperature, flame resistant plastic
enclosure.
72NB
22.8 H x 56.1 V
46.7 H x 83.8 V
25,027
170
3x5
15,126
89
72NB
22.8 H x 56.1 V
46.7 H x 83.8 V
30,024
220
3x5
18,153
82.5
Electrical Assembly: The fixture electrical compartment shall contain all LED driver
components and shall be provided with an internal terminal block for AC power connections. The compartment is designed for an optional twist lock photo control.
Optical: The Alpha luminaire provides the best combination of vertical and horizontal
illumination while reducing light behind the poles. The Alpha features revolutionary individual LED optical control based on TIR high performance acrylic optical designs. Flood
Lighting optics are available in 2x2, 4x4, 5x5, 6x6, 5x3 and 3x5 NEMA distributions and
are interchangeable with Type 2, 3,4, and Type V roadway and area lighting optics. The
Alpha also features a protective lens cover. Well designed optics result in fewer poles and
fixtures that use less energy consumption, while improved light distribution result in lower
life-cycle cost as well as initial installation costs.
Lifeshield™ Circuit: Thermal circuit shall protect the luminaire from excessive temperature by interfacing with its 0-10V dimmable drivers to reduce drive current as necessary.
The factory-preset temperature limits shall be designed to ensure maximum hours of
operation to assure L70 lumen maintenance. The device shall activate at a specific,
factory-preset temperature, and progressively reduce power over a finite temperature
range and may be reliably operated in any ambient temperature up to 55ºC (131 ºF).
Operation shall be smooth and undetectable to the eye. Thermal circuit shall directly
measure the temperature at the LED solder point. For maximum simplicity and reliability,
the device shall have no dedicated enclosure, circuit board, wiring harness, gaskets, or
hardware. Device shall have no moving parts, and shall operate entirely at low voltage
(NEC Class 2). Thermal circuit shall be designed to “fail on”, allowing the luminaire to
revert to full power in the event of an interruption of its power supply, or faulty wiring
connection to the drivers. Device shall be able to co-exist with other 0-10V control devices (occupancy sensors, external dimmers, etc.). The device will effectively control the
solder point temperature as needed; otherwise it will allow the other control device(s) to
function unimpeded.
Watts Optic
TM21 is the framework for taking LM-80 data and making useful LED lifetime projections. Reported
and Calculated Lifetimes shown are based on hours at the time of this printing. For current Reported
and Calculated hours please contact factory or Beacon’s web-site.
Operating Environment: Shall be able to operate normally in ambient temperatures
from -40°C to 40°C
CCT (COLOR TEMP) Lumen Output
Multipliers
CRI
(Color Rendering)
Finish: Finish shall be a Beacote V polyester powder-coat electro-statically applied and
thermocured. Beacote V finish shall consist of a five stage iron phosphate chemical
pretreatment regimen with a polymer primer sealer, oven dry off, and top coated with
a thermoset super TGIC polyester powder coat finish. The finish shall meet the AAMA
605.2 performance specification which includes passing a 3000 hour salt spray test for
5000° K = 1.0
min 67 CRI
4000° K = .92
min 70 CRI
3000° K = .75
min 80 CRI
2041 58th Avenue Circle East Bradenton, fl 34203
Phone: (800) 345-4928
Due to our continued efforts to improve our products, product specifications are subject to change
without notice.
Fax: (941) 751-5535
SPECIFICATION
Catalog Number:
Type:
AL/X-24NB/55-5K-2X2-UNV-SF3X
Submitted by ESL-Spectrum
Job Name:
IndyGo - Facility Upgrades Project
Engineer: Parsons Brinckerhoff
(Indianapolis)
Notes:
F2
INDY16-44005
Type:
rev. 06.10.2015
Project Name:
ALPHA (LED)
Alpha Floodlight
Max Weight: 27.0 lbs
Max EPA: 1.32 sq ft
Notes:
design . performance . technology
www.beaconproducts.com
Sample
AL-U
Ordering
60NB-136
/
5K
/
A
B
4X4
UNV
/
PEC
/
C
D
/
E
DETAILS
PM
/
F
G
A. MODEL
16 3/8”
11 5/8 ”
14 5/8 ”
26 1/2”
14 5/8 ”
I
F. ELECTRICAL OPTIONS
PEC
AL-U
Alpha, up light
PCR-TL
photocell, twist-lock 1,3
PCR-SC
photocell, shorting cap 1,3
2PF
dual power feed 1,2
photocell, button
24NB-55
55 Watts - LED array
36NB-80
80 Watts - LED array
G. MOUNTING OPTIONS
60NB-136
136 Watts - LED array
WM
wall mount
72NB-170
170 Watts - LED array
PM
3” pier mount
72NB-220
220 Watts - LED array
SF3
2 3/8” OD tenon (std.)
H. SHIELD OPTIONS
11 3/4”
C. CCT - COLOR TEMP
FL
full louver
3K
3000K
FV
full visor
4K
4000K
HL
half louver
5K
5000K (std.)
HV
half visor
2X2
narrow spot
I. COLOR
4X4
narrow flood
BBT
basic black textured
5X5
medium flood
BMT
black matte textured
6X6
wide flood
WHT
white textured
5X3
horizontal flood
MBT
metallic bronze textured
3X5
vertical flood
BZT
bronze textured
DBT
dark bronze textured
GYS
gray smooth
DPS
dark platinum smooth
D. BEAM
8”
Wall Mount (WM)
SHIELD OPTIONS
Full Louver
H
Alpha, down light
20”
Standard SF3 mount
Slips 2 3/8” to 3” O.D. Tenon
BBT
/
AL-D
B. ENGINE-WATTS
9 3/8”
FL
/
Full Visor
E. VOLTAGE
UNV
120-277V
GNT
green textured
347
347V
MST
metallic silver textured
480
480V
MTT
metallic titanium textured
OWI
old world iron
RAL
______________
MOUNTING OPTIONS
11 3/4”
1/2”
Half Visor
16 3/8 ”
1 1/2”
6 1/2”
Half Louver
8”
2041 58th Avenue Circle East Bradenton, fl 34203
Phone: (800) 345-4928
1
not available @ 347V or 480V input
2
available on 24NB-55, 72NB-170, and 72NB-220 only
3
PCR-TL and PCR-SC not available on AL-U
Fax: (941) 751-5535
ORDERING
Submitted by ESL-Spectrum
Job Name:
IndyGo - Facility Upgrades Project
Engineer: Parsons Brinckerhoff
(Indianapolis)
Catalog Number:
Type:
AL/X-24NB/55-5K-2X2-UNV-SF3X
Notes:
F2
INDY16-44005
rev. 06.10.2015
ALPHA (LED)
Alpha Floodlight
Max Weight: 27.0 lbs
Max EPA: 1.32 sq ft
design . performance . technology
Intended Use: The Alpha Luminaire is a high performance “LED” energy and maintenance lighting solution, designed with optical versatility. Markets include large areas
requiring perimeter lighting, security fence lighting, truck terminals, car lots, recreational
sports lighting, airport ramp lighting and building flood-lighting. The Alpha LED luminaire
is intended to be used to reduce energy and maintenance associated with HID legacy
lighting technology.
Construction: The housing, electrical compartment and fitter are made from die cast
aluminum that is pre-treated and powder-coated to meet the most rugged industry standards. The finish is corrosion resistant to meet ASTMB-117, resists cracking or loss of
adhesion per ASTM D522, resists surface impacts of up to 160 inch-pound. All external
hardware is corrosion resistant.
Adjustable cast knuckle: The adjustable knuckle is designed to slip fit 2 3/8” to 3”
O.D. tenon. The knuckle is designed for continuous aiming adjustment without the use
is cast serrations. The cast knuckle uses cast external degree markers for aiming. The
aiming adjustment is design to operate with a single bolt adjustment. The Alpha can
adjust 30-degrees up from Nadir to straight up vertical.
corrosion resistance and resists cracking or loss of adhesion per ASTM D522 and resists
surface impacts of up to 160 inch-pound.
Agency Certification: The luminaire shall bear a CSA label and be marked suitable for
wet locations.
Warranty: Beacon luminaires feature a 5 year limited warranty. Beacon LED luminaires
with LED arrays feature a 5 year limited warranty covering the LED arrays. LED drivers are
covered by a 5 year limited warranty. PIR sensors carry a 5 year limited warranty from the
sensor manufacturer. See Warranty Information on www.beaconproducts.com complete
details and exclusions.
Power/Lumens & Distributions
D.
Delivered
Lumens
LPW
Engine
Beam Angle
Field
Angle
Max
Candela
24NB
17.4 H x 17.2 V
32.3 H x 32.5 V
45,920
55
2x2
5,680
104.5
36NB
17.4 H x 17.2 V
32.3 H x 32.5 V
68,881
80
2x2
8,520
104.5
60NB
17.4 H x 17.2 V
32.3 H x 32.5 V
114,802
136
2x2
14,200
104.5
72NB
17.4 H x 17.2 V
32.3 H x 32.5 V
137,673
170
2x2
17,029
100
72NB
17.4 H x 17.2 V
32.3 H x 32.5 V
164,385
220
2x2
20,333
96.2
24NB
28.1 H x 29.4 V
52.4 H x 51.8 V
18,255
55
4x4
5,627
103.8
36NB
28.1 H x 29.4 V
52.4 H x 51.8 V
27,383
80
4x4
8,440
103.7
60NB
28.1 H x 29.4 V
52.4 H x 51.8 V
46,635
136
4x4
14,066
103.7
72NB
28.1 H x 29.4 V
52.4 H x 51.8 V
54,762
170
4x4
17,039
100
72NB
28.1 H x 29.4 V
52.4 H x 51.8 V
65,349
220
4x4
20,143
95.3
24NB
66.8 H x 67.3 V
97.0 H x 96.3 V
8,342
55
5x5
5,042
91.7
36NB
66.8 H x 67.3 V
97.0 H x 96.3 V
12,514
80
5x5
7,563
92.3
60NB
66.8 H x 67.3 V
97.0 H x 96.3 V
20,856
136
5x5
12,605
92.8
72NB
66.8 H x 67.3 V
97.0 H x 96.3 V
13,347
170
5x5
16,107
95
72NB
66.8 H x 67.3 V
97.0 H x 96.3 V
30,024
220
5x5
18,146
82.5
24NB
72.0 H x 74.9 V
102.2 H x 101.6 V
4,449
55
6x6
5,603
101.8
36NB
72.0 H x 74.9 V
102.2 H x 101.6 V
6,674
80
6x6
8,404
102.5
60NB
72.0 H x 74.9 V
102.2 H x 101.6 V
11,123
136
6x6
14,024
103.3
72NB
72.0 H x 74.9 V
102.2 H x 101.6 V
13,347
170
6x6
17,315
102
72NB
72.0 H x 74.9 V
102.2 H x 101.6 V
16,089
220
6x6
20,260
92.1
Fasteners: All fasteners shall be stainless steel. When tamper resistant fasteners are
required, spanner HD (snake eye) style shall be provided (special tool required, consult
factory).
24NB
56.2 H x 22.7 V
82.3 H x 46.4 V
8,342
55
5x3
5,032
91.6
36NB
56.2 H x 22.7 V
82.3 H x 46.4 V
12,514
80
5x3
7,547
92.3
60NB
56.2 H x 22.7 V
82.3 H x 46.4 V
20,856
136
5x3
12,579
93
Drivers: Luminaires are equipped with an LED driver that accepts 100V through 277V,
50 Hz to 60 Hz (UNV), or a driver that accepts 347V or 480V input. Power factor is .92 at
full load. All electrical components are rated at 50,000 hours at full load and 40-C ambient conditions per MIL-217F Notice 2. Optional 0 to 10 volt dimming drivers are available
upon request. Component-to -component wiring within the luminaire will carry no more
than 80% of rated current and is listed by UL for use at 600VAC at 50°C or higher. Plug
disconnects are listed by UL for use at 600 VAC.
72NB
56.2 H x 22.7 V
82.3 H x 46.4 V
25,027
170
5x3
15,126
89
72NB
56.2 H x 22.7 V
82.3 H x 46.4 V
30,024
220
5x3
18,108
82.5
24NB
22.8 H x 56.1 V
46.7 H x 83.8 V
8,342
55
3x5
5,042
91.6
36NB
22.8 H x 56.1 V
46.7 H x 83.8 V
12,514
80
3x5
7,566
92.3
60NB
22.8 H x 56.1 V
46.7 H x 83.8 V
20,856
136
3x5
12,611
93
Surge Protector: The on-board surge protector shall be a UL recognized component
for the United States and Canada and have a surge current rating of 20,000 Amps using
the industry standard 8/20 pSec wave. The LSP shall have a clamping voltage of 320V
and surge rating of 372J. The case shall be a high-temperature, flame resistant plastic
enclosure.
72NB
22.8 H x 56.1 V
46.7 H x 83.8 V
25,027
170
3x5
15,126
89
72NB
22.8 H x 56.1 V
46.7 H x 83.8 V
30,024
220
3x5
18,153
82.5
Electrical Assembly: The fixture electrical compartment shall contain all LED driver
components and shall be provided with an internal terminal block for AC power connections. The compartment is designed for an optional twist lock photo control.
Optical: The Alpha luminaire provides the best combination of vertical and horizontal
illumination while reducing light behind the poles. The Alpha features revolutionary individual LED optical control based on TIR high performance acrylic optical designs. Flood
Lighting optics are available in 2x2, 4x4, 5x5, 6x6, 5x3 and 3x5 NEMA distributions and
are interchangeable with Type 2, 3,4, and Type V roadway and area lighting optics. The
Alpha also features a protective lens cover. Well designed optics result in fewer poles and
fixtures that use less energy consumption, while improved light distribution result in lower
life-cycle cost as well as initial installation costs.
Lifeshield™ Circuit: Thermal circuit shall protect the luminaire from excessive temperature by interfacing with its 0-10V dimmable drivers to reduce drive current as necessary.
The factory-preset temperature limits shall be designed to ensure maximum hours of
operation to assure L70 lumen maintenance. The device shall activate at a specific,
factory-preset temperature, and progressively reduce power over a finite temperature
range and may be reliably operated in any ambient temperature up to 55ºC (131 ºF).
Operation shall be smooth and undetectable to the eye. Thermal circuit shall directly
measure the temperature at the LED solder point. For maximum simplicity and reliability,
the device shall have no dedicated enclosure, circuit board, wiring harness, gaskets, or
hardware. Device shall have no moving parts, and shall operate entirely at low voltage
(NEC Class 2). Thermal circuit shall be designed to “fail on”, allowing the luminaire to
revert to full power in the event of an interruption of its power supply, or faulty wiring
connection to the drivers. Device shall be able to co-exist with other 0-10V control devices (occupancy sensors, external dimmers, etc.). The device will effectively control the
solder point temperature as needed; otherwise it will allow the other control device(s) to
function unimpeded.
Watts Optic
TM21 is the framework for taking LM-80 data and making useful LED lifetime projections. Reported
and Calculated Lifetimes shown are based on hours at the time of this printing. For current Reported
and Calculated hours please contact factory or Beacon’s web-site.
Operating Environment: Shall be able to operate normally in ambient temperatures
from -40°C to 40°C
CCT (COLOR TEMP) Lumen Output
Multipliers
CRI
(Color Rendering)
Finish: Finish shall be a Beacote V polyester powder-coat electro-statically applied and
thermocured. Beacote V finish shall consist of a five stage iron phosphate chemical
pretreatment regimen with a polymer primer sealer, oven dry off, and top coated with
a thermoset super TGIC polyester powder coat finish. The finish shall meet the AAMA
605.2 performance specification which includes passing a 3000 hour salt spray test for
5000° K = 1.0
min 67 CRI
4000° K = .92
min 70 CRI
3000° K = .75
min 80 CRI
2041 58th Avenue Circle East Bradenton, fl 34203
Phone: (800) 345-4928
Due to our continued efforts to improve our products, product specifications are subject to change
without notice.
Fax: (941) 751-5535
SPECIFICATION
Catalog Number:
ARFX25WF-5K-45-UV-DB-X
Submitted by ESL-Spectrum
Job Name:
IndyGo - Facility Upgrades Project
Engineer: Parsons Brinckerhoff
(Indianapolis)
Type:
F3
Notes:
INDY16-44005
ARFX25
ArcheType ® Flood Luminaire
kl_arfx25_spec.pdf
20”
JOB
TYPE
NOTES
APPROVALS
20”
FEATURES
■
Independently aimed LEAR™ modules
20”
distribution creation
355° horizontal and 70° vertical module
■
adjustment and -5° to +25° housing adjustment
■
Certifications
■ Design software interface for custom
Variable drive current
■
IP66 sealed optical chamber
■
Traditional NEMA distributions available
20”
9”
SPECIFICATIONS
26-5/8”
ARFX25 Max Weight = 64 lbs. EPA = 1.51
20”
9”
7.482”
20”
26-5/8”
6-1/2”
7.482”
Side
Front
9”
Bottom
ORDERING CODE
ARFX25
26-5/8”
Fixture
Distribution
WF Wide Flood
VF Vertical Flood
MF Medium Flood
NF Narrow Flood
Color Temperature
3K 3000K
4K 4000K
5K 5000K
Electrical Module
Drive Current
35
40
45
50
55
60
7.482”
NS Narrow Spot
SP Spot
X Custom1
350mA
400mA
450mA
500mA
550mA
600mA
6-1/2”
Controls
Wireless
WIR-RMS-IO 208
240
277
WIR-RML-IO 208
240
277
Motion
Voltages
UV 120-277V
347 347V
480 480V
Fuse Options
Fixture Finish
Photocell Options
SG Stealth Gray
A25-7H Horizontal3
SF 120, 277, 347 Line Volts
BL Black
A25-7V Vertical3
DF 208, 240, 480 Line Volts
DB Dark Bronze
A30 120V
LG Light Gray
A31 208V
PS Platinum Silver
A32 240V
WH White
CC Custom Color2
A33 277V
A34 347V
A35 480V
For Pole Spec Select: http://www.kimlighting.com/products/arms_and_poles/
For Control Spec Select: http://trpssl.com/index.html
SCL-R Round Pole-Mounted Occupancy
1
SCL-S Square Pole-Mounted Occupancy
Sensor up to 16"
3
Sensor up to 16"
6-1/2”
2
Custom distributions must include IES# file where indicated
Custom colors supject to additional charges, minimum quantites and
extended lead times. Consult representative.
Indicates mount position of fixture.
SCH-R Round Pole-Mounted Occupancy
Sensor up to 30"
SCH-S Square Pole-Mounted Occupancy
Sensor up to 30"
Kim Lighting reserves the right to change specifications without notice.
© 2015 KIM LIGHTING | 16555 East Gale Ave. | City of Industry | CA 91745
P 626.968.5666 | F 626.369.2695 | www.kimlighting.com | Rev May 2015
| 1 |
Catalog Number:
ARFX25WF-5K-45-UV-DB-X
Submitted by ESL-Spectrum
Job Name:
IndyGo - Facility Upgrades Project
Engineer: Parsons Brinckerhoff
(Indianapolis)
Type:
F3
Notes:
INDY16-44005
ARFX25
ArcheType ® Flood Luminaire
kl_arfx25_spec.pdf
ARFX LEAR™ 5x5 FLOOD
Distribution Type
3000K
Field Angle - 10% max
350 mA
400 mA
450 mA
500 mA
550 mA
600 mA
WF - Wide Flood (°H X °V)
14774
16884
18995
23638
23216
25326
VF - Vertical Flood (°H X °V)
14425
16486
18547
23081
22668
24729
MF - Medium Flood
15440
17645
19851
24703
24262
26468
15090
17246
19402
24145
23714
25869
(°H X °V)
NF - Narrow Flood (°H X °V)
Designation
400 mA
450 mA
500 mA
550 mA
600 mA
WF - Wide Flood (°H X °V)
17236
19698
22160
27577
27085
29547
VF - Vertical Flood (°H X °V)
16830
19234
21638
26927
26447
28851
MF - Medium Flood
18013
20586
23159
28820
28306
30879
17606
20121
22636
28169
27666
30181
(°H X °V)
NF - Narrow Flood (°H X °V)
Distribution Type
350 mA
400 mA
450 mA
500 mA
550 mA
600 mA
17588
20100
22613
28140
27638
30150
VF - Vertical Flood (°H X °V)
17173
19626
22080
27477
26986
29440
MF - Medium Flood
18380
21006
23632
29409
28883
31509
17965
20531
23098
28744
28231
30797
(°H X °V)
NF - Narrow Flood (°H X °V)
ELECTRICAL CHARACTERISTICS
Ordering Code
ARFX25
System
Watts
Line Voltage
VAC
120
277
480
350 mA
170
1.42
0.61
N/A
400 mA
194
1.62
0.88
N/A
450 mA
219
1.82
0.79
N/A
500 mA
243
2.03
0.88
N/A
120-480
Hz
Amps AC
50/60
550 mA
267
2.23
0.96
N/A
600 mA
292
2.43
1.05
N/A
TM-21 LIFETIME CALCULATION
LEAR™
>65
1.78
Drive Current
WF - Wide Flood (°H X °V)
Optical System
>80
1.33
CRI Minimum
S/P Ratio
5K
5000K
Delivered Lumens - 219C pro-rate
Field Angle - 10% max
LEAR™
3000K
Drive Current
350 mA
Optical
System
Spectroradiometric
4K
4000K
>70
1.66
3K
Delivered Lumens - 219C pro-rate
Field Angle - 10% max
4000K
Consult factory for Amber, Turtle Friendly, Gulf Coast and
Observatory applications.
Drive Current
Distribution Type
5000K
LED COLOR
Delivered Lumens - 219C pro-rate
Ordering Code
ARFX25
Ambient Environment °C
16
Min.
Max THD Dimming
Power
(%)
Range
Factor
>0.9
20
10% to
100%
Projected Lumen Maintenance
26
TM-21 60
100
15°
98
97
96
94
25°
40°
96
96
95
95
93
93
90
90
Dimming
Source current out of 0-10V
purple wire
Absolute voltage range on
0-10V (+) purple wire
Min
Typical
Max
Min
Typical
Max
0mA
-
2mA
0
-
12V
Reported L70
>60Khrs
Kim Lighting reserves the right to change specifications without notice.
© 2015 KIM LIGHTING | 16555 East Gale Ave. | City of Industry | CA 91745
P 626.968.5666 | F 626.369.2695 | www.kimlighting.com | Rev May 2015
| 2 |
Submitted by ESL-Spectrum
Job Name:
IndyGo - Facility Upgrades Project
Engineer: Parsons Brinckerhoff
(Indianapolis)
Catalog Number:
ARFX25WF-5K-45-UV-DB-X
Type:
F3
Notes:
INDY16-44005
ARFX25
ArcheType ® Flood Luminaire
kl_arfx25_spec.pdf
SPECIFICATIONS
Housing:
Electrical Components:
Finish:
■ Low copper aluminum alloy die-casting
■ Standard programmable driver for variable
ade and abrasion resistant, electrostatically
■ F
designed as one-piece with external
cooling ribs.
■ Solid cast aluminum walls between the
housing and arm creating a thermal
barrier between the optical and electrical
compartments.
■ M
olded silicone gasket throughout to insure
sealing between the two compartments and
ingress protection.
H
ousing designed with integral Type X
■
thermal transfer “turrets” utilized for both
thermal transfer and secure location of
the LEAR™ Optical Module. The turrets
are spaced in rows of 3 X 3, designed
to optimize photometric performance for
standard and Type X custom distributions.
Lens Frame:
■ One-piece die-cast, low copper aluminum
alloy secured to housing with eight captive,
tamper-resistant stainless steel fasteners.
■ Molded silicone gasket assembles into a
cast channel in the doorframe sealing the
3/16” thick low iron-content, tempered glass
lens against the housing upon closure.
drive current settings from 350mA to 600mA.
molded silicon gasket seal to separate from
the optical chamber.
Type X LEAR™ Optical Module:
protecting the sensitive electronics and
acting as a signal for maintenance.
■ Programmable Driver is rated for -40°F
starting.
■ “Thermal Shield” Primary Side thermister
Protection for sustainable life of LEAR
modules and electronic components.
Dimming:
Dimming range from 10% to 100% by the
use of its standard 0-10V interface on the
programmable driver.
■ IP66 sealed Type X LEAR modules utilize
six high output LEDs, positioned beneath a
precision, high purity molded acrylic prism
U
L 8750 Standard for Safety for Light
■
Emitting Diode (LED) Equipment for use in
Lighting Products.
■ C
SA C22.2#250.0 Luminaires.
A
NSI C136.31-2010 3G Vibration tested and
■
compliant
■ R
CM/CE/SASO certifications pending.
Consult factory for specific details.
■
R
oHS compliant.
■ Modular wiring harness in the service
■ Dimming circuitry compatible with 0-10V
CAUTION:
■
F
ixtures must be grounded in accordance
area provided for user access to the
dimming circuitry.
user-defined control devices.
Arm:
■
Low copper aluminum alloy, two piece die-
casting designed and gasketed to function as
one-piece.
■
with national, state and/or local electrical
codes, Failure to do so may result in
serious personal injury.
WARRANTY:
■
F
or full warranty see http://www.
hubbelllighting.com/resources/warranty
External cooling ribs create continuous
aesthetic and thermal path
■
Molded silicone gasket seals the wiring
channel seperating the arm from the
housing thermally insulating the electronic
components.
IES files created using design software
vertical adjustment with a tamper resistant
fastener.
L 1598 Standard for Luminaires.
■ U
■ M
eets Buy American provisions within ARRA.
■ Customer factory adjusted distributions using
■ Tooless 355° horizontal adjustment and 70°
Certifications and Listings:
■
■ Optimized standard distribution or custom
beam patterns.
Dark Bronze, (WH) White, (PS) Platinum
Silver, (SG) Stealth Gray, (LG) Light Gray, and
(CC) Custom Color (Include RAL#).
series circuited.
■ Open circuit fault will extinguish the luminaire
■ Turret alignment and thermal transfer
design allow for freedom of adjustability and
precision of the LEAR™ LED array.
■ S
tandard colors include (BL) Black, (DB)
■ 10KV Transient voltage/surge suppression
■ IP66 construction to protect the interior
components from dust and water ingress.
applied, thermally cured, triglycida
isocyanurate (TGIC) polyester powdercoat.
■ Electrical components are located in the arm
■
Internally accessible slip-fitter provided to
attach to a 1-1/4” to 2-3/8” tenon with handsfree wiring and maintenance.
■
Luminaire housing adjustable +30° and -5
via locking fastener under the arm cover.
■ Targeted optics minimize pixilation concerns
to provide outstanding performance,
uniformity and glare control.
Kim Lighting reserves the right to change specifications without notice.
© 2015 KIM LIGHTING | 16555 East Gale Ave. | City of Industry | CA 91745
P 626.968.5666 | F 626.369.2695 | www.kimlighting.com | Rev May 2015
| 3 |
Submitted by ESL-Spectrum
Job Name:
IndyGo - Facility Upgrades Project
Engineer: Parsons Brinckerhoff
(Indianapolis)
Catalog Number:
ARFX25WF-5K-45-UV-DB-X
Notes:
Type:
F3
INDY16-44005
ARFX25
ArcheType ® Flood Luminaire
kl_arfx25_spec.pdf
Controls
A25-7H or V4
Fully gasketed 7-pin receptacle standard.
Easy access location above the electrical
compartment. 7-pin construction allows
user-defined interface and control definition
of operational performance. ANSI twist-lock
control module by-others. H (Horizontal) or V
(Vertical) indicates mount position of fixture.
Round Pole-Mounted Occupancy
Sensor up to 16'
SCL-R
Round Pole Mounted Occupancy Sensor up
to 16’ - Outdoor occupancy sensor with 0-10V
interface dimming control mounts directly to
the pole. Wide 360° pattern. Module colors
available Black, Gray, and White. Module is
cut for round pole mounting. Pole diameter
needed. Pole to be drilled in the field with
provided installation instructions.
Ordering Example: SCL-R41/2772 /BL 3
Square Pole-Mounted Occupancy
Sensor up to 16'
SCL-S
Square Pole Mounted Occupancy Sensor up
to 16’ - Outdoor occupancy sensor with 0-10V
interface dimming control mounts directly to
the pole. Wide 360° pattern. Module colors
available Black, Gray, and White. Module is
cut for square pole mounting. Pole diameter
needed. Pole to be drilled in the field with
provided installation instructions.
Ordering Example: SCL-L/2772 /BL 3
Round Pole-Mounted Occupancy
Sensor up to 30’
SCH-R
Round Pole Mounted Occupancy Sensor up
to 30’ - Outdoor occupancy sensor with 0-10V
interface dimming control mounts directly to
the pole. Wide 360° pattern. Module colors
available Black, Gray, and White. Module is
cut for round pole mounting. Pole diameter
needed. Pole to be drilled in the field with
provided installation instructions.
Ordering Example: SCH-R41/2772 /BL 3
Wireless Control
WIR-RMS
WIR-RML
WIR-RMS-IO
WIR-RML-IO
Hubbell Building Automation’s wiSCAPE™
Fixture Module is a bidirectional wireless
RF device that allows an individual fixture to
be managed, monitored and metered. The
wiSCAPE Fixture Modules communicates
wirelessly over a robust 2.4GHz ISM (Industrial,
Scientific and Medical) certified meshed
radio signal. The wiSCAPE Fixture Module
drastically simplifies control and automation of
projects, especially in retrofit environments and
challenges the legacy world of wired-systems.
wiSCAPE wireless control technology adapts
easily to complex automation situations for
quick, simple and economical commissioning.
Photocell4
Factory installed photocell inside housing
with a fully gasketed sensor on the side wall.
For multiple fixture mountings, one fixture is
supplied with a photocell to operate the others.
Square Pole-Mounted Occupancy
Sensor up to 30'
SCH-S
Square Pole Mounted Occupancy Sensor up
to 30’ - Outdoor occupancy sensor with 0-10V
interface dimming control mounts directly to
the pole. Wide 360° pattern. Module colors
available Black, Gray, and White. Module is cut
for square pole mounting.
Ordering Example: SCH-S/2772 /BL 3
1
Pole Diameter, 2Voltage, 3 Color, 4 Not compatible with wiSCAPE.
Kim Lighting reserves the right to change specifications without notice.
© 2015 KIM LIGHTING | 16555 East Gale Ave. | City of Industry | CA 91745
P 626.968.5666 | F 626.369.2695 | www.kimlighting.com | Rev May 2015
| 4 |
Submitted by ESL-Spectrum
Job Name:
IndyGo - Facility Upgrades Project
Engineer: Parsons Brinckerhoff
(Indianapolis)
Catalog Number:
EL700F3/7L5KUV/X
Type:
F4
Notes:
INDY16-44005
Scarab EL700
TM
120 to 277 Volt Die-Cast Aluminum LED
9/5/13 • kl_el700led_spec.pdf
Approvals:
Type:
Job:
Fixture Catalog number:
Fixture Options:
Fixture and Finish
Ordered separately from fixture, see page 3.
See 120 Volt Mounting Options Spec Sheet for mounting options
Specifications
Date:
Page: 1 of 4
Housing: Die-cast aluminum body and lens frame.
Swivel: Die-cast aluminum with locking teeth and K" solid
brass NPT mount. Provides horizontal rotation independent
of the threaded mount. Swivel locked by J-20 stainless set
screw. Clear anodized prior to powder coating for added
corrosion resistance.
EL700/7L
7 Light Emitting Diodes
7K"
(191 mm)
6D"r.
4K" 3D"
Gasketing: Silicone gaskets throughout.
Fasteners: Stainless steel.
Wiring: No. 18AWM rated 105°C.
(114 mm) (92 mm)
K" NPT
Optical System: High performance acrylic optic securely
attached to internal heat sink for maximum thermal dissipation.
2B"
Driver: Universal Voltage from 120 to 277V with a ±10%
tolerance. -40ºF. starting temperature. All drivers are
Underwriters Laboratories recognized.
(54 mm)
EL700/9L
9 Light Emitting Diodes
9"
(229 mm)
8"r.
5B" 4M"
(130 mm) (110 mm)
K" NPT
Finish: Each luminaire receives a fade and abrasion
resistant, electrostatically applied, thermally cured, triglycidal
isocyanurate (TGIC) polyester powdercoat finish. Standard
colors include (BL) Black, (DB) Dark Bronze, (GR) Verde
Green.
Listed to: UL 1598 Standard for Luminaires - UL 8750
Standard for Safety for Light Emitting Diode (LED) Equipment
for use in Lighting Products and CAN/CSA C22.2 No. 250.0
-08 Luminaires. LEDs and drivers are RoHS compliant.
CAUTION: Fixtures must be grounded in accordance with
national, state and/or local electrical codes, Failure to do so
may result in serious personal injury.
2B"
(54 mm)
EL700/12L
12 Light Emitting Diodes
10M"
9K"r.
(262 mm)
6K" 5D"
(165 mm) (143 mm)
K" NPT
2B"
(54 mm)
U.s. patent D424,731
KIM LIGHTING RESERVES THE RIGHT TO CHANGE SPECIFICATIONS WITHOUT NOTICE.
© 2013 KIM LIGHTING INC. • p.o. Box 60080, City of Industry, CA 91716-0080 • TEL: 626/968-5666 • FAX: 626/369-2695
Catalog Number:
EL700F3/7L5KUV/X
Submitted by ESL-Spectrum
Job Name:
IndyGo - Facility Upgrades Project
Engineer: Parsons Brinckerhoff
(Indianapolis)
Type:
F4
Notes:
INDY16-44005
Scarab EL700
TM
120 to 277 Volt Die-Cast Aluminum LED
9/5/13 • kl_el700led_spec.pdf
Type:
Job:
Page: 2 of 4
Standard Features
Ordering Information
Fixture
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
l
1
Source
EL700S3/7L3KUV 1
EL700S3/7L4KUV 1
EL700S3/7L5KUV 1
EL700F3/7L3KUV 1
EL700F3/7L4KUV 1
EL700F3/7L5KUV 9W,
9W,
9W,
9W,
9W,
9W,
EL700S3/9L3KUV 1
EL700S3/9L4KUV 1
EL700S3/9L5KUV 1
EL700F3/9L3KUV 1
EL700F3/9L4KUV 1
EL700F3/9L5KUV 11W,
11W,
11W,
11W,
11W,
11W,
9
9
9
9
9
9
EL700S3/12L3KUV 1
EL700S3/12L4KUV 1
EL700S3/12L5KUV 1
EL700F3/12L3KUV 1
EL700F3/12L4KUV 1
EL700F3/12L5KUV 14W,
14W,
14W,
14W,
14W,
14W,
12
12
12
12
12
12
1
1
7
7
7
7
7
7
LEDs,
LEDs,
LEDs,
LEDs,
LEDs,
LEDs,
3000K
4200K
5100K
3000K
4200K
5100K
LEDs,
LEDs,
LEDs,
LEDs,
LEDs,
LEDs,
3000K
4200K
5100K
3000K
4200K
5100K
LEDs,
LEDs,
LEDs,
LEDs,
LEDs,
LEDs,
3000K
4200K
5100K
3000K
4200K
5100K
1
S = Spot, F = Narrow Flood, 3 = 350mA, UV = Universal Voltage from 120 to
277V with a ±10% tolerance.
Finish
TGIC powder coat.
Color:
Black
Cat. No.:  BL
Dark Bronze
 DB
Verde Green
 GR
© 2013 KIM LIGHTING INC. • p.o. Box 60080, City of Industry, CA 91716-0080 • TEL: 626/968-5666 • FAX: 626/369-2695
Catalog Number:
EL700F3/7L5KUV/X
Submitted by ESL-Spectrum
Job Name:
IndyGo - Facility Upgrades Project
Engineer: Parsons Brinckerhoff
(Indianapolis)
Type:
F4
Notes:
INDY16-44005
Scarab EL700
TM
120 to 277 Volt Die-Cast Aluminum LED
9/5/13 • kl_el700led_spec.pdf
Type:
Job:
Page: 3 of 4
Fixture Options
Ordered Separately from Fixture
Aluminum
Adjustable Glare Shield
Spun aluminum shield with 45° cut and drain hole. Includes die-cast low copper alloy
(< 0.6%) aluminum lens ring. The shield is rotatable 360°. Replaces standard lens
ring/hood on fixture.
31° cutoff
(87 mm)
Finish
Black
Dark Bronze
Verde Green
Aluminum
Full Glare Shield
32° cutoff
31.5° cutoff
3N" DIA.
4A" DIA.
(91 mm)
5N" 4F"
DIA. DIA.
(106 mm)
(103 mm)
(145 mm)
EL700/9L
l AGS73BL
l AGS73DB
l AGS73GR
EL700/12L
l AGS74BL
l AGS74DB
l AGS74GR
6D"
31° cutoff
3G" DIA.
(87 mm)
Finish
Black
Dark Bronze
Verde Green
EL700/7L
l FGS72BL
l FGS72DB
l FGS72GR
8L"5A"
(222 mm)
4M"
31.5° cutoff
32° cutoff
3N" DIA. 5N" DIA.
4F" DIA.
4A" DIA. (91
mm)
(106 mm)
(103 mm)
(141 mm)
EL700/9L
l FGS73BL
l FGS73DB
l FGS73GR
6L"
(172 mm)
(129 mm)
(168 mm) (110 mm)
(143 mm)
EL700/12L
l FGS74BL
l FGS74DB
l FGS74GR
5H" DIA.
(145 mm)
l No Option
l No Option
l No Option
Stainless steel wire screen welded to flange, and held in place with spring clips. Screen inserts
inside full glare shield only. All debris screens are black iridite colored.
8L"
6D"4M"
(110 mm)
5D"
(143 mm)
Finish
Black
Mounting
l No Option
l No Option
l No Option
Spun aluminum shield with drain hole. Includes die-cast low copper aluminum lens ring.
Replaces standard lens ring/hood on fixture.
5D"
Debris Screen
(172 mm)
5H" DIA.
(141 mm)
EL700/7L
l AGS72BL
l AGS72DB
l AGS72GR
6L"
(129 mm)
(110 mm)
(143 mm)
3G" DIA.
8L"
(222
mm)
5A"
6D"
4M"
(168 mm)
5D"
EL700/7L
l DS72
31° cutoff
EL700/9L
l DS73
3G" DIA.
(87 mm)
5A"
(222 mm)
(129 mm)
(168 mm)
EL700/12L
31.5° cutoff
3N" DIA.
4A"
DIA.
(91 mm)
l DS74
(103 mm)
32° cutoff
4F"
DIA.
5N"
DIA.
l No
Option
(141 mm)(106 mm)
Refer to 120 Volt Mounting Options Spec Sheet
http://www.kimlighting.com/content/products/specs/specs_files/kl_120vmounting_spec.pdf
for individual mounting options.
© 2013 KIM LIGHTING INC. • p.o. Box 60080, City of Industry, CA 91716-0080 • TEL: 626/968-5666 • FAX: 626/369-2695
5H" DI
(145 mm)
Catalog Number:
EL700F3/7L5KUV/X
Submitted by ESL-Spectrum
Job Name:
IndyGo - Facility Upgrades Project
Engineer: Parsons Brinckerhoff
(Indianapolis)
Type:
F4
Notes:
INDY16-44005
Scarab EL700
TM
120 to 277 Volt Die-Cast Aluminum LED
9/5/13 • kl_el700led_spec.pdf
Type:
Job:
Page: 4 of 4
Lumen Data
Spectroradiometric
3000K
2800 to 3175K
≤80
>.90 @ 120V
Correlated Color Temp. CCT (K)
Color Rendering Index (CRI)
Power Factor
4200K
3800 to 4600K
≤80
>.90 @ 120V
5100K
4600 to 5600K
≤70
>.90 @ 120V
Electrical Drive Current
EL700-7L
Current
EL700-9L
EL700-12L
Volts -AC
Amps - AC
System Watts
Volts -AC
Amps - AC
System Watts
Volts -AC
Amps - AC
System Watts
120
0.08
9
120
0.09
11
120
0.13
14
208
0.05
9
208
0.06
11
208
0.08
14
240
0.04
9
240
0.05
11
240
0.07
14
277
0.04
9
277
0.04
11
277
0.06
14
350mA
Absolute Lumens
EL700-7L
Current
350mA
EL700-9L
EL700-12L
Temp.
Spot
Narrow Flood
Temp.
Spot
Narrow Flood
Temp.
Spot
3000K
806
502
3000K
1031
714
3000K
1334
Narrow Flood
918
4200K
1047
661
4200K
1339
939
4200K
1778
1208
5100K
1173
741
5100K
1500
1024
5100K
1938
1317
Main Beam Candela and Beam Angle
EL700-7L
Current
Temp.
350mA
Spot
Beam°
EL700-9L
Narrow
Flood
Beam°
Temp.
Spot
Beam°
EL700-12L
Narrow
Flood
Beam°
Temp.
Spot
Beam°
Narrow
Flood
Beam°
3000K
5553
15°
1170
35°
3000K
6499
15°
3134
35°
3000K
9528
15°
3782
35°
4200K
7214
15°
1544
35°
4200K
8441
15°
4121
35°
4200K
12699
15°
4977
35°
5100K
8082
15°
1730
35°
5100K
9456
15°
4494
35°
5100K
13842
15°
5426
35°
LED performance and lumen output continues to improve at a rapid pace. Log onto www.kimlighting.com to download the most current photometric files from Kim Lighting’s IES File Library.
For custom optics and color temperature configurations, contact factory.
Projected Lumen Maintenance
TM21-11*
100,000 hrs
Calulated (L70)
.97
.96
1,003,000 hrs
* 60,000 hrs, 350mA, Ts 46-51°C / 25°C ambient.
© 2013 KIM LIGHTING INC. • p.o. Box 60080, City of Industry, CA 91716-0080 • TEL: 626/968-5666 • FAX: 626/369-2695
Catalog Number:
LBIL4-40ML-EDU-ELL14
Submitted by ESL-Spectrum
Job Name:
IndyGo - Facility Upgrades Project
Engineer: Parsons Brinckerhoff
(Indianapolis)
Type:
G
Notes:
INDY16-44005
LBIL
LED Bi-Level Luminaire with Controls
PROJECT INFORMATION
Project Name
Type
Catalog No.
Date
HOUSING
CERTIFICATION
Steel fixture body.
ELECTRICAL
FEATURES
•
•
•
•
•
•
•
•
•
•
Energy saving luminaire with integrated occupancy controls
Long-life 50,000 hour LEDs at L70 for reduced maintenance
Choice of four lumen packages
Occupancy controlled dimming of the LEDs increases energy
savings while maintaining base light levels in stairwells at
all times
Tool-less access to ballast for ease of maintenance
Can be surface mounted, wall mounted, or suspended
Fail safe operation switches light level to 100% if sensor
is damaged
Optional battery backup available for emergency
egress applications
DesignLights Consortium® (DLC) qualified
5 year warranty (terms and conditions apply)
Long-life LEDs are rated for 50,000 hours at L70
lumen maintenance. Driver options include fixed
output for on/off function, step dimming (high/low/
off), or continuous 0-10V dimming.
LENS
Highly efficient acrylic lens with a linear refractive
pattern for even illumination and excellent LED
obscuration.
All luminaires are built to UL1598 and 2108
standards, and bear appropriate CSA labels. Damp
location labeling is standard. Emergency equipped
fixtures labeled UL924. Adheres to LM79, LM80 and
TM21 standards. Designlights Consortium® (DLC)
qualified. Please refer to the DLC website for specific
product qualifications at www.designlights.org.
WARRANTY
5 year warranty (terms and conditions apply).
OCCUPANCY SENSOR
Hubbell Building Automation Internally mounted
Passive Infrared Occupancy sensor. LED indicator
for easy verification of coverage. Lens has a 1500
square-foot, 360° coverage area at a mounting
height of 10 ft, and a 2:1 radius to height ratio
coverage pattern. Sensor includes an adjustable
time delay, and motion/photocell sensitivity time
delay, and motion/photocell sensitivity.
ORDERING INFORMATION
4
LBIL
MODEL
–
SIZE
LBIL LED Bi-Level
Luminaire
EXAMPLE LBIL4-35LW-EDU
COLOR TEMP
2 2'
4 4'
8 8'
U
–
LUMEN OUTPUT
35 3500K
40 4000K
50 5000K
VW
MW
LW
ML
Very Low Watt (2' only)
Medium Low Watt (2' only)
Low Watt
Medium Lumen
DRIVER
VOLTAGE
OPTIONS
E Fixed Output
ESD Step Dimming
ED 0-01V Dimming
U 120V-277V
ELL14 Emergency Battery Pack Installed,
1400 Lumens
NYC NYC Compliant
NYCU NYC Compliant, Union Label
C6TL15_ 6' Cord and Twist-Lock™ Plug
15A (Add Voltage: 1=120,
2=277)
C6TL20_ 6' Cord and Twist-Lock™ Plug
20A (Add Voltage: 1=120,
2=277)
C6P151 6' Cord and Straight Blade Plug
15A, 120V
PRODUCT AVAILABILITY, 100% LIGHT OUTPUT
Size
2'
4'
8'
Lumen
Package
Nominal
Lumens
Nominal
Watts
Efficacy
VW
MW
LW
LW
ML
LW
ML
1,600
2,000
3,000
3,000
5,000
6,000
10,000
16
21
28
31
51
62
102
99
97
105
98
96
98
96
–
Page 1/2 Rev. 12/03/15
© 2015 Columbia Lighting, a division of Hubbell Lighting, Inc. Specifications subject to change without notice.
701 Millennium Blvd. Greenville, SC 29607 / Tel 864.678.1000 / Website www.columbialighting.com
SURFACE / LBIL
Catalog Number:
LBIL4-40ML-EDU-ELL14
Submitted by ESL-Spectrum
Job Name:
IndyGo - Facility Upgrades Project
Engineer: Parsons Brinckerhoff
(Indianapolis)
Type:
G
Notes:
INDY16-44005
LBIL
LED Bi-Level Luminaire with Controls
PHOTOMETRIC DATA
Test #L04134338 Test Date 4/17/13
LUMINAIRE DATA
Luminaire
Ballast
Ballast Factor
Lamp
Fixture Lumens
Watts
Mounting
Shielding Angle
Spacing Criterion
Luminous Opening
in Feet
INDOOR CANDELA PLOT
LBIL-4-40ML-EU
LBIL Led Bi-Level Luminaire, Surface
55"L. X 6"W. X 4-1/2"H.
LED luminaire, white reflector, and
diffused lens.
D310CQ50UNVA-A
1.00
LED
5276
50.40
Surface
0º = 90 90º = 90
0º = 1.19 90º = 1.28
Length: 4.00
Width: 0.38
Height: 0.17
180
165
150
ENERGY DATA
135
1700
120
Total Luminaire Efficiency
100.0%
Total Lumens per Watt
ANSI/IESNA RP-1-2004
Compliance
Comparative Yearly Lighting
Energy Cost per 1000 Lumens
105
Noncompliant
$2.26 based on
3000 hrs. and
$0.08 per KWH
850
ZONAL LUMEN SUMMARY
105
Zone
90
75
850
Lumens % Lamp % Fixt.
0-30
1271
24.1
24.1
0-40
2073
39.3
39.3
0-60
3635
68.9
68.9
0-90
4939
93.6
93.6
0-180
5276
100.0
100.0
60
1700
0
0.0
15
30
Horiz 0-180
45.0
45
90.0
DIMENSIONAL DATA
6"
4"
54"
0.88"
6"
10"
54"
6"
NOTE: All dimensions are in inches; dimensions and specifications are subject to change without notice. Please consult factory or check sample for verification.
Page 2/2 Rev. 12/03/15
© 2015 Columbia Lighting, a division of Hubbell Lighting, Inc. Specifications subject to change without notice.
701 Millennium Blvd. Greenville, SC 29607 / Tel 864.678.1000 / Website www.columbialighting.com
SURFACE / LBIL
Catalog Number:
WL-LP-X-2-40-X/LEDR40-UNV
Submitted by ESL-Spectrum
Job Name:
IndyGo - Facility Upgrades Project
Engineer: Parsons Brinckerhoff
(Indianapolis)
Notes:
Type:
H
INDY16-44005
Wet-Lock Series
BOE)JHI&óDJFODZ-&%BOE'MVPSFTDFOU8SBQ-VNJOBJSFT
*13BUFE8FU-PDBUJPOT
Project: ________________________________
Specifications:
Approved By: ___________________________
Housing: Double channel housing of
Electrical: Standard ballast - Electronic less than
20-gauge CRS, type 304 stainless steel or
aluminum construction.
10% THD high performance instant start (0°F)
universal voltage (120-277 volt). See options for
other choices.
End Caps: Precision stamped 20-gauge type
Fixture Type: ___________________________
Cat. Number: ___________________________
Standard
304 stainless steel end caps secured to housing with standard stainless steel fasteners or
optional hub assembly.
Finish: White powder coat finish (1,000 hour salt
spray test) or 4-B (satin polish) stainless steel finish.
See Options for white powder coated stainless.
Gasket: Closed cell extruded SealPro™ NSF
Listed gasketing. Resists grease and solvents.
Installation: Four .312” debossed holes for
Reflector: High reflectance white powder coat
finished (min. reflectivity 88%).
Lens: (Standard) Smooth surface .125" White/
Opal high impact blend virgin acrylic. Linear
clear prismatic polycarbonate optional (LPx )
Sources: T5, T5HO, T8 and LED
(For total LED lumens generated in a fixture multiply array lumens by the number
of arrays. Example 4400 x 2 arrays = 8800 lumens. Fluorescent lamps supplied by
others.)
25
Year
Optional
NSF
Warranty
WET LOCATION
C-2 NON-FOOD
ZONE
HOSE DOWN
IP
55
surface mounting. One .875” (1/2” trade-size)
flattened and silicone sealed knockout located on
back of housing for wiring. See below for other
mounting and supply entry options. Rows: Joiner
bands provided for continuous row mounting (See
Option: CRM). Please specify number of fixtures
in each run.
85
PSI
IEC 60529
RATED
Listings: UL and CUL Listed for Wet Location.
Rated IP-55 dust and water resistance. NSF Listed
for Food, Splash and Non-Food zones. Optionally
rated 85 psi hosedown (HD85).
3.7"
5.5"
4.50"
6"
WL-A
WL-B
WL-LPC
WL-D
9.00"
8"
2.6"
4.00"
Ordering Information: Example: WL-LPD-3-40-4/T8-UNV-FF
WL -
-
4FSJFT-FOT1SPöMF
WL
-
-
-
.BUFSJBM4J[F4PVSDF
A = 1-2 Lamps/1 LEDs
B = 2 Lamps/LEDs
C = 2 Lamps/LEDs Ω
D = 3-4 Lamps/2 LEDs
1 = CRS Ext. & Int.
2 = SS Ext. & CRS Int.
3 = SS Ext. & Int.
4 = AL Ext. & CRS Int.
7PMUBHF
120V
277V
347V
UNV
(Blank)= Opal Arcylic
LP= Clear Prismatic
(Linear)
Fluorescent
LED Arrays
20 = 2' Housing
1 or 2/T8 = F17T8 (G13) 1 or 2/LEDR35 = 2200 Lumen Array(s)
1 or 2/T5 = F14WT5 (G5) 1 or 2/LEDR40 = 2200 Lumen Array(s)
1 or 2/T5HO = F24WT5 (G5)
40 = 4' Housing
1 or 2/T8 = F32T8 (G13)
1 or 2/T5 = F28WT5 (G5)
1/T5HO = F54WT5 (G5)
80 = 8' Housing
2, 4, 6 or 8/T8 = F32T8 (Tandem)
2, 4, 6, or 8/T5HO = F54WT5HO (Tandem)
1 or 2/LEDR35 = 4400◊ Lumen Array(s)
1 or 2/LEDR40 = 4400◊ Lumen Array(s)
0QUJPOT
FF = Fuse & Holder
FD = Double Fuse & Holders
2/EB = Two Ballasts, (Two Circuits)
EBL = -20°F Electronic Ballast
EBPRS= Program Rapid Start Ballast
EBDIM= Electronic Dimming Ballast
HLO= High Light Output Ballast*
1/EM = 1 Lamp Battery Pack (700L)
2/EM = 1 or 2 Lamp Battery Pack (1400L)*
CRM = Custom Row Mounting*
TP = Stainless Steel Tamperproof Fasteners
SSH = Stainless Hubs (2) for Feed Thru Supply
HD85 = 85 P.S.I. Hosedown*
WHT= White Finished Stainless Steel
PMB= Pendant Mount Brackets (2)
CMB= Corner Mount Brackets (2)
AMB= Adjustable Mount Bracket (2)
* Note: Consult factory for multiple options marked "*". ‡ Housings made of CRS
or Aluminum are capable of NSF Non-Food Zone with GG option.
Ω Not available in 8 foot size.
◊ For total lumens generated in a fixture multiply array lumens by the number of
arrays. Example 4400 x 2 arrays = 8800 lumens.
©2013 Kurtzon Lighting
Catalog Number:
LC6LED-277-6LCLED-6-40K-8B24
Submitted by ESL-Spectrum
Job Name:
IndyGo - Facility Upgrades Project
Engineer: Parsons Brinckerhoff
(Indianapolis)
Type:
K
Notes:
INDY16-44005
6" LED Cylinder
DATE:TYPE:
LCC6LED
FIRM NAME:
PROJECT:
120 - 277V
0-10V Dimming
1000-1800 Lumens
APPLICATIONS:
LiteForms™ LCC6LED Series is a 6”commercial
grade LED cylinder with available outputs
between 1000-1800 lumens. This is suitable
to replace most indoor/outdoor CFL cylinder
applications in a variety of commercial, retail,
and institutional spaces to achieve wide
distribution illumination patterns on vertical walls
or columns while realizing substantial energy
and maintenance savings. Rated for a minimum
of 50,000 hrs life (70% lumen maintenance)
with ambient temperatures up to 30ºC (86ºF)
during operation.
HOUSING:
Seamless .058" thick extruded aluminum
cylinder body with durable powder coat paint
finish and die cast aluminum canopy arm
(wall mount) in a variety of architectural colors
including Prescolite's exclusive Zet, metallic
silver.
REFLECTOR:
High purity spun aluminum self-flanged reflector
with iridescence suppressed Alzak semi-diffuse
anodized (standard) or optional white or black
painted finish.
LED LIGHT ENGINE:
The LCC6LED light engines use either 36, 48, or
60 mid power Nichia LEDs, specifically mixed
to provide a minimum of 80 CRI with 3 SCDM
color consistency. The use of multiple mid power
LEDs allows for optimal thermal management
by effectively spreading the heat over a larger
area, eliminating hot spots on the LEDs. A
diffuse yet highly transmissive lens obscures the
view of the LEDs and creates a smooth, even
look from below.
For conversion to millimeters,
multiply inches by 25.4
Not to Scale
The light engine is available in multiple
lumen packages and Kelvin temperatures
to accommodate any design requirement.
The system is designed to provide optimal
life and lumen maintenance (50,000 hrs at
70% lumen maintenance). The reflector/light
engine assembly features a twist-and-lock
installation and is mechanically retained with
a safety cable for ease of maintenance
O 4-1/2"
1-1/4"
LED DRIVER:
The LCC6LED is offered standard with a
25-watt constant current Osram LED driver
with 0-10V flicker free dimming to 10%.
Other driver options are available including
Osram LED 0-10V dimming to 1% (DM1),
Lutron EcoSystem to 1% (EDM), or Lutron
2-wire Leading Edge dimming to 1% (120V
only). All options are Class 2 compliant,
have inherent short-circuit and overload
protection, and meet UL 8750 with a
50,000 hour minimum anticipated life.
13-1/2"
12-1/4"
INSTALLATION:
Available cylinder mounting options
include wall mount, ceiling/surface mount,
pendant stem mount, and cord mount.
Each mounting has a quick connect
feature that allows easy access for future
technology upgrades.
CERTIFICATIONS:
CSA certified to US and Canadian safety
standards. Wall mount suitable for wet
location. Surface and Pendant suitable
for wet location under canopy/covered
ceilings only. Cord mount suitable for
damp locations.
O 6"
SURFACE
WARRANTY:
5 Year Warranty. See www.prescolite.com
for details.
Pendant, wall, and cord mount line
art on page 3.
CATALOG NUMBER:
CYLINDER
❑LCC6LED
6" LED
Cylinder
MOUNTING
EXAMPLE: LCC6LEDP18L35K8WFL45 WH
OUTPUT
LED COLOR TEMP CRI
VOLTAGE
OPTIONS
BEAM
❑10L
❑27K ❑8 ❑Blank ❑Blank
❑WFL45
❑P
1000 2700 80+ 120-277
Standard 0-10V 45
Pendant (18"
Volt
CRI
Delivered
dimming
to
Kelvin
Degree
standard)
❑120V
Lumens ❑30K
10%
Cutoff
❑S
120V
❑14L
3000
❑EDM3
Surface
(for
1
400
1,2
Kelvin
Lutron
❑CM
2DM)
Delivered ❑35K
EcoSystem to
Cord Mount
Lumens 3500
1%
❑W
❑18L
Kelvin
❑2DM
Wall Mount
1800
❑40K
Lutron 2 Wire
Delivered 4000
Leading Edge
Kelvin
Lumens
Dimming to 1%
❑50K
(120V only)
5000
❑DM1
Kelvin
Osram dimming
to 1% 0-10V
REFLECTOR FINISH
REFLECTOR COLOR
❑BC
❑Blank
Painted Black
Clear Alzak,
Cone
Semi-Diffuse
❑WC
Painted
White Cone
CYLINDER COLOR
❑BA
Brushed
Aluminum
❑BZ
Bronze
❑BL
Matte
Black
❑WH
Matte
White
❑Z
Zet
NOTES:
1 Cord length 6 feet, clear sleeve
2 Plastic bushings are grey on white, brushed aluminum and zet
cylinder; black on black and bronze
3 Consult factory for 3-wire dimming option
A Division of Hubbell Lighting, Inc.
In a continuing effort to offer the best product possible we reserve the right to change, without
notice, specifications or materials that in our opinion will not alter the function of the product.
Web: www.prescolite.com
•
Tech Support: (888) 777-4832
LFO-LED-016
Submitted by ESL-Spectrum
Job Name:
IndyGo - Facility Upgrades Project
Engineer: Parsons Brinckerhoff
(Indianapolis)
Type:
K
Notes:
INDY16-44005
PHOTOMETRIC DATA
LCC6LEDx10L
LCC6LEDx14L
LCC6LEDx18L
Input Voltage
120-277V
120-277V
120-277V
Input Frequency
50/60 Hz
50/60 Hz
50/60 Hz
Input Current
0.130 (120v) 0.166 (120v).
0.207 (120v)
0.056 (277v)
0.071 (277v)
0.09 (277v)
19.7W
24.9W
700mA
700mA
®
Input Power 15.5W
701 Millennium Blvd
Greenville, SC 29607
Constant Current Output 700mA
www.hubbelllighting.com
NVLAP LAB CODE: 201003-0
Power Factor
≥0.90
≥0.90
≥0.90
THD
<25%
<20%
<20%
EMI Filtering
FCC 47CFR
FCC 47CFR
FCC 47CFR
Driver options
ZONE
75˚
400
400
%FIXT
53.3
83.0
99.7
100.0
0.0
100.0
NVLAP LAB CODE: 201003-0
60˚
/15
TTS
= 24.9
SCOLITE
2
Lm/W
CC6LEDS14L30K8WFL45WH
ECT
D - 6" LED Cylinder
ING
CRITERION = 1.1
7DT-V1
TER:
5.000
3000K LEDs
OT25WPRG1250C/UNV/DIM/J
IN CANDELA/SQ METER
DRIVER
LIC- Part #93044138
um with Clear Alzak
t #93057761
IS ABSOLUTE FOR THE
IDED.
LUMENS
800
800
PAGE: 3 OF 8
45˚
1200
1200
0˚
15˚
30˚
DEG
CANDELA
0
5
15
25
35
45
55
65
75
85
90
1145
1136
1088
1121
858
328
21
9
0
0
0
86
254
413
393
189
26
2
1
0
100.0
LCC6LEDS14L30K8WFL45WH
LED Light Engine: 3000K, 80+ CRI
System Wattage: 19.7W
Fixture Delivered Lumens: 1364
Fixture Efficacy: 69.2
Spacing Criteria: 1.1
300
300
60˚
600
600
45˚
1.1
900
900
0˚
15˚
CANDELA
0
5
15
25
35
45
55
65
75
85
90
881
890
894
907
641
247
10
2
1
0
0
80%
0
0
Zonal Cavity Method
70%
50%
30%
10%
20% Effective Floor Cavity Reflectance
% Wall Reflectance
70 50 30 10 70
30
10
50
30
97
88
96
90
95
88
94
86
3
100 93
79
84
81
78
94
85
87
83
79
74
50
98
30
91
92
10 50 30 10 50
86
84
82
78
74
89
82
84
77
81
73
86
80
83
76
72
78
74
10
71
5
88
79
72
67
87
78
72
67
76
71
66
74
70
66
73
69
65
6
83
73
66
61
81
72
66
61
70
65
61
69
64
60
68
63
60
78
67
61
56
77
67
60
56
65
60
55
64
59
55
63
58
55
8
73
63
56
51
72
62
56
51
61
55
51
60
55
51
59
54
50
9
10
69
65
58
54
52
48
47
44
68
64
58
54
51
48
47
43
57
53
51
47
47
43
56
52
51
47
47
43
55
51
50
47
47
LCC6LEDS18L35K8WFL45WH
LUMENS
0-60
1361
99.8
0-90
1364
100.0
0
0.0
1364
100.0
43
Test No. 15.00459
LUMINANCE DATA IN CANDELA/
SQ. METER
Angle in Vertical
Average - 0º
45°
19142
55°
955
%LUMINAIRE
65°
259
75°
85°
212
0
Zonal Cavity Method
COEFFICIENTS OF UTILIZATION
% Effective Ceiling Cavity Reflectance
80%
70%
50%
30%
10%
20% Effective Floor Cavity Reflectance
% Wall Reflectance
30
10
50
30
1
2
113 110 107 105 110 108 105 103 104 102 100 100 98
107 101 97 93 104 99 95 92 96 93 90 93 90
97
88
96
90
95
88
94
86
3
100 93
80
84
81
79
4
70 50 30 10 70
94
86
88
80
83
75
98
92
50
92
85
30
87
79
10 50 30 10 50
83
75
89
83
85
78
81
74
87
80
83
76
73
79
75
10
72
5
89
79
73
68
87
78
72
68
77
71
67
75
70
66
73
69
66
6
83
73
67
62
82
73
66
62
71
65
61
70
65
61
68
64
60
7
79
68
61
57
77
67
61
56
66
60
56
65
60
56
64
59
56
8
74
63
57
52
73
63
56
52
62
56
52
60
55
51
59
55
51
9
10
70
65
59
55
52
49
48
44
69
65
58
55
52
48
48
44
57
54
52
48
48
44
57
53
51
48
47
44
56
52
51
47
47
LCC6LEDS14L30K8WFL45WH
30˚
Test No. 15.00306
Tested at 25ºC Ambient in accordance to IESNA LM-79-2008
D INDUSTRY PROCEDURES. FIELD PERFORMANCE MAY DIFFER FROM LABORATORY PERFORMANCE.
1681
75°
85°
% Effective Ceiling Cavity Reflectance
CANDELA DISTRIBUTION
DEG
65°
113 110 107 105 110 108 105 103 104 102 100 100 98
106 101 96 93 104 99 95 92 96 93 90 93 90
7
90-180
1.14
1.03
1.00
1.00
0.91
1
2
4
ZONE
75˚
CANDELA/SQ METER
0.0
100.0
ZONAL LUMEN SUMMARY
90˚
= 19.7
m/W
0
1747
COEFFICIENTS OF UTILIZATION
0-180
%FIXT
55.2
84.0
99.8
100.0
0.0
100.0
CRITERION =
6.000
99.7
1747
Test No. 15.00459
Tested at 25ºC Ambient in accordance to IESNA LM-79-2008
ISHED INDUSTRY PROCEDURES. FIELD PERFORMANCE MAY DIFFER FROM LABORATORY PERFORMANCE.
RY
S
3
7
1
4
0
4
1741
0-90
CANDELA DISTRIBUTION
®
701 Millennium Blvd
Greenville, SC 29607
%LUMINAIRE
0-60
90-180
90˚
LUMENS
Kelvin
Kelvin
Kelvin
Kelvin
Kelvin
LUMINANCE DATA IN CANDELA/
SQ. METER
Angle in Vertical
Average - 0º
45°
36604
55°
2889
ZONAL LUMEN SUMMARY
0-180
www.hubbelllighting.com
MMARY
MENS
931
1450
1741
1747
0
.00306
1747
0-10V
Room Cavity
Ratio
108
310
514
519
251
40
6
0
0
5000
4000
3500
3000
2700
-30ºC to +30ºC
LED Light Engine: 3500K, 80+ CRI
System Wattage: 24.9W
Fixture Delivered Lumens: 1747
Fixture Efficacy: 70.2
Spacing Criteria: 1.1
LUMENS
Lumen Multiplier Table
Unless specified, photometrics for the LCC6LED
are published below at a nominal 3000 or
3500 Kelvin temperature. This table may be
used to approximate the lumen values at different Kelvin temperatures. Power consumption
would stay the same.
Part 15, Class A
Room Cavity
Ratio
A
LiteForms - 6" LCC6LED Cylinder
DRIVER DATA
Part8 15, Class A
Part 15, Class A
15.00459
PAGE: 3 OF
/20/15
Operating Temperature -30ºC to +30ºC-30ºC to +30ºC
PRESCOLITE
: LCC6LEDS18L35K8WFL45WH
Dimming (standard)
0-10V
0-10V
LED Cylinder
cular Aluminum - Part #93057761
Over-voltage, over-current, short-circuit protected
757DT-V1
-Nichia
Lumen output & input wattage may vary slightly with EDM/2DM/DM1
O.: OT25W/PRG/1250C/UNV/DIM/J
am Drivers
ant
WN IS ABSOLUTE FOR THE
VIDED.
LCC6LEDS18L35K8WFL45WH
:
Catalog Number:
LC6LED-277-6LCLED-6-40K-8B24
Web: www.prescolite.com • Tech Support: (888) 777-4832
701 Millennium Boulevard • Greenville, SC 29607 U.S.A. • Phone (864) 678-1000
Copyright ©2015 Prescolite, Inc., a division of Hubbell Lighting, Inc. All Rights Reserved
Specifications subject to change without notice. • Printed in U.S.A. • LFO-LED-014 • 4/29/15
44
Test No. 15.00306
®
701 Millennium Blvd
Greenville, SC 29607
Catalog Number:
LC6LED-277-6LCLED-6-40K-8B24
Submitted by ESL-Spectrum
www.hubbelllighting.com
NVLAP LAB CODE: 201003-0
Job Name:
IndyGo - Facility Upgrades Project
Engineer: Parsons Brinckerhoff
(Indianapolis)
305
Type:
K
Notes:
INDY16-44005
PAGE: 3 OF 7
LITE
LEDS10L30K8WFL45WH
Cylinder
-V1
0K LEDs
25W/PRG/1250C/UNV/DIM/J
IVER
PHOTOMETRIC DATA
LiteForms - 6" LCC6LED Cylinder
with Clear Alzak Finish- Part #93057761
- Part #93044138
ABSOLUTE FOR THE SAMPLE PROVIDED.
LUMENS
63
181
327
306
137
21
3
1
0
TS = 15.5
Lm/W
CT
NG CRITERION =
ER: 6.000"
ZONE
1034
99.5
1039
100.0
250
250
60˚
500
500
45˚
1.1
750
750
0˚
15˚
0
0.0
1039
100.0
CANDELA DISTRIBUTION
75˚
IN CANDELA/SQ METER
%LUMINAIRE
0-90
90-180
90˚
LUMENS
0-60
0-180
%FIXT
54.9
84.4
99.5
100.0
0.0
100.0
LUMINANCE DATA IN CANDELA/
SQ. METER
Angle in Vertical
Average - 0º
45°
14182
55°
955
ZONAL LUMEN SUMMARY
30˚
DEG
CANDELA
0
5
15
25
35
45
55
65
75
85
90
668
663
628
720
504
183
10
3
1
0
0
389
75°
85°
212
0
% Effective Ceiling Cavity Reflectance
80%
70%
50%
30%
10%
20% Effective Floor Cavity Reflectance
% Wall Reflectance
30
10
50
30
1
2
113 110 107 105 110 108 105 103 104 102 100 100 98
107 101 97 93 104 99 95 92 96 93 90 93 90
97
88
96
90
95
88
94
86
3
100 93
80
84
81
78
4
70 50 30 10 70
94
86
87
79
83
75
98
92
50
92
85
30
86
79
10 50 30 10 50
82
74
89
85
82
77
81
73
86
80
83
76
73
78
75
10
72
5
89
79
73
68
87
78
72
67
76
71
67
75
70
66
73
69
66
6
83
73
66
62
82
72
66
61
71
65
61
69
64
60
68
63
60
7
Test No. 15.00305
Tested at 25ºC Ambient in accordance to IESNA LM-79-2008
65°
Zonal Cavity Method
COEFFICIENTS OF UTILIZATION
Room Cavity
Ratio
MARY
ENS
570
877
034
039
0
039
LCC6LEDS10L30K8WFL45WH
LED Light Engine: 3000K, 80+ CRI
System Wattage: 15.5W
Fixture Delivered Lumens: 1039
Fixture Efficacy: 67.0
Spacing Criteria: 1.1
78
68
61
56
77
67
61
56
66
60
56
64
59
55
63
59
55
8
74
63
56
52
72
62
56
51
61
55
51
60
55
51
59
54
51
9
10
69
66
59
55
52
48
48
44
68
65
58
54
52
48
47
44
57
53
51
47
47
44
56
53
51
47
47
44
55
52
50
47
47
LCC6LEDS10L30K8WFL45WH
43
Test No. 15.00305
Dimming Compatibility Table
HED INDUSTRY PROCEDURES. FIELD PERFORMANCE MAY DIFFER FROM LABORATORY PERFORMANCE.
Dimming Ballast
DM/DM1
DM/DM1
EDM
2DM
Manufacturer
Lutron DVTV
Leviton AWRMG-7xx,
AWSMG-7xx,
AWSMT-7xx
Lutron
Lutron
Web Link
http://bit.ly/11jSvZg
http://bit.ly/1BJn2R9
http://bit.ly/1vtjHAl
http://bit.ly/1nF4Zp1
O 5-1/4"
5"
2-7/8"
1/4 "
See notes
1&2
17-5/8"
72"
on page 1
4-1/2"
84-1/4"
ADJUSTABLE
TO CUSTOMER
REQUIREMENTS
29-7/8"
12-1/4"
12-1/4"
12-1/4"
O 6"
8-7/8"
6"
O 6"
WALL MOUNT
PENDANT MOUNT
Web: www.prescolite.com • Tech Support: (888) 777-4832
701 Millennium Boulevard • Greenville, SC 29607 U.S.A. • Phone (864) 678-1000
Copyright ©2015 Prescolite, Inc., a division of Hubbell Lighting, Inc. All Rights Reserved
Specifications subject to change without notice. • Printed in U.S.A. • LFO-LED-014 • 4/29/15
CORD MOUNT
Catalog Number:
LJT14-40HLG-FAA12-EDU
Submitted by ESL-Spectrum
Job Name:
IndyGo - Facility Upgrades Project
Engineer: Parsons Brinckerhoff
(Indianapolis)
Type:
M
Notes:
INDY16-44005
LJT14
1' × 4', LED Troffer
PROJECT INFORMATION
Project Name
Type
Catalog No.
Date
CONSTRUCTION
Luminaire housing and end caps are die-formed
code-gauge cold-rolled steel. Optical system hinges
from either side for easy access to LED module and
electrical components.
FEATURES
• Full distribution LED troffer
• Direct replacement of fluorescent 1x4
• Long-life, 60,000 hour LEDs at L80 reduce life cycle
maintenance costs
• Four LED color choices and 80 CRI
• Many shielding choices
• Two door frame choices
• Metal to metal light leak protection on all four sides of
shielding frame
• Fixed output, step dimming (high/low/off), or 0-10V dimming
drivers available
• Hinged optical system allows easy access to LED modules and
electrical from below the ceiling
• All models standard with IC rating
• DesignLights Consortium® (DLC) qualified
• Five year warranty
FINISH
All metal parts processed with a multi-stage
phosphate bonding treatment and finished
with a high reflectance baked white enamel.
SHIELDING
Lens is high transmission pattern #12 acrylic (A12)
for light diffusion without compromise to light
output. Other shielding may be specified. If desired
shielding media is not shown in ordering guide,
contact your local Hubbell Lighting representative.
INSTALLATION
An access plate is furnished with each recessed
fixture for fast wiring connections without the
necessity to open the fixture or wireway.
ORDERING INFORMATION
LJT
14
MODEL
–
LW
ML
HL
VL
Low Watt
Medium Lumen
High Lumen
Very High Lumen
SIZE
LUMEN OUTPUT
14 1' × 4'
See Product Availability Table Below
PRODUCT AVAILABILITY
SIZE OUTPUT NOMINAL LUMENS
14
LW
2,485-2,605
ML
3,605-3,860
HL
4,430-4,755
VL
4,920-5,350
SHIELDING
G Grid1
SM Surface
Mount
CM Cable Mount2
3000K
3500K
4000K
5000K
WATTS
26
39
51
55
A12 Pattern 12
Acrylic Lens
A12125 Pattern
12 Acrylic
Lens, 0.125"
Nominal
DOOR
A12F Pattern
12 Frosted
FS White Flush
Acrylic Lens
Steel
FA White Flush A12125F Pattern
12 Frosted
Aluminum
Acrylic
Lens, 0.125"
Nominal
A19 Pattern
19 Acrylic
Lens, 0.156"
Nominal
A19F Pattern
19 Frosted
Acrylic Lens
0.156"
BEST EFFICACY
97-102
92-98
88-94
91-97
Lumens will vary according to color temperatures and other factors.
See specific photometric test(s).
WARRANTY
Five year warranty. (Terms and Conditions Apply)
U
–
CEILING TYPE
30
35
40
50
CERTIFICATION
All luminaires are built to UL 1598 and 2108
standards, and bear appropriate CSA labels. Damp
location labeling is standard. Emergency equipped
fixtures labeled UL924. Adheres to LM79, LM80 and
TM21 industry standards. IC rating is standard on all
models. DesignLights Consortium® (DLC) qualified.
Please refer to the DLC website for specific product
qualifications at www.designlights.org.
EXAMPLE LJT14-35MLG-FSA12-EU
–
COLOR TEMP
LJT LED Lensed
Troffer
CEILING COMPATIBILITY
Designed for recessed installation in standard
inverted tee grid ceilings (G). Four integral
T-bar clips standard. Also available for recessed
installation in hard ceilings (G with FK accessory),
surface mount at ceiling plane (SM), or cable
mount suspension below ceiling plane (CM). For
compatibility with specific ceilings contact your
Hubbell Lighting representative.
DRIVER
VOLTAGE
E Fixed Output
ESD Step Dimming
ED 0-10V Dimming
U 120V-277V
For hard ceilings use flange kit accessory.
2
Order hanger accessories separately.
3
For compatibility with Dual-Lite LiteGear® inverters in lieu of
installed battery pack, contact Hubbell Lighting Representative.
4
Not available with Surface Mount.
Damp label—standard.
IC rating—standard.
1
Page 1/3 Rev. 11/06/15
© 2015 Columbia Lighting, a division of Hubbell Lighting, Inc. Specifications subject to change without notice.
701 Millennium Blvd. Greenville, SC 29607 / Tel 864.678.1000 / Website www.columbialighting.com
–
OPTIONS
3-Wire Flex
4-Wire Flex
5-Wire Flex
Emergency Battery
Pack Installed,
1400 Lumens3,4
GLR Fast Blow Fuse
G1 Single Gasketing
(Door to Housing)
G2 Double Gasketing
(G1 and Lens to Door)
G3 Triple Gasketing
(G2 and Housing
to Ceiling)
CP Chicago Plenum
GTD Not Available
C388
C488
C588
ELL14
ACCESSORIES
(ORDER SEPARATELY)
FK14 1' × 4' Single
Flange Kit
CM48Y1SC3F-KIT 48" Cable Mount
Kit for 1' wide
Cable Mount
Fixtures, 3-Wire
LED / LJT14
Catalog Number:
LJT14-40HLG-FAA12-EDU
Submitted by ESL-Spectrum
Job Name:
IndyGo - Facility Upgrades Project
Engineer: Parsons Brinckerhoff
(Indianapolis)
Type:
M
Notes:
INDY16-44005
LJT14
1' × 4', LED Troffer
PHOTOMETRIC DATA
LUMINAIRE DATA
Luminaire
Ballast
Ballast Factor
Lamp
Fixture Lumens
Watts
Mounting
Shielding Angle
Spacing Criterion
Luminous Opening
in feet
Test 15.00231 Test Date 02/06/2015
ENERGY DATA
LJT14-40LW-XXA12-EDU
LJT LED, Lensed Troffer
1 x 4 led with A12 pattern acrylic
prismed lens
D700C30UNVTZC
1.00
LED
2606
25.50
Recessed
0º = 90 90º = 90
0º = 1.23 90º = 1.13
Length: 3.81
Width: 0.83
Height: 0.00
INDOOR CANDELA PLOT
Total Luminaire Efficiency
100.0%
Total Lumens per Watt
ANSI/IESNA RP-1-2004
Compliance
Comparative Yearly Lighting
Energy Cost per 1000 Lumens
102
YES-VDT
NORMAL USE
$2.40 based on
3000 hrs. and
$0.08 per KWH
90
75
ZONAL LUMEN SUMMARY
Zone
0-30
0-40
0-60
0-90
0-180
Lumens %Lamp
978
1523
2272
2606
2606
37.5
58.4
87.2
100.0
100.0
650
%Fixt.
37.5
58.4
87.2
100.0
100.0
60
1300
0
15
0.0
30
Horiz 0-180
45.0
45
90.0
Test 15.00191 Test Date 02/02/2015
ENERGY DATA
LUMINAIRE DATA
Luminaire
Ballast
Ballast Factor
Lamp
Fixture Lumens
Watts
Mounting
Shielding Angle
Spacing Criterion
Luminous Opening
in feet
LJT14-40ML-XXA12-EDU
LJT LED, Lensed Troffer
1 x 4 led with A12 pattern acrylic
prismed lens
D10C55UNVTC
1.00
LED
3860
39.40
Recessed
0º = 90 90º = 90
0º = 1.23 90º = 1.13
Length: 3.81
Width: 0.83
Height: 0.00
INDOOR CANDELA PLOT
Total Luminaire Efficiency
100.0%
Total Lumens per Watt
ANSI/IESNA RP-1-2004
Compliance
Comparative Yearly Lighting
Energy Cost per 1000 Lumens
98
Noncompliant
90
$2.42 based on
3000 hrs. and
$0.08 per KWH
75
ZONAL LUMEN SUMMARY
Zone
0-30
0-40
0-60
0-90
0-180
Lumens %Lamp
1445
2253
3365
3860
3860
37.4
58.4
87.2
100.0
100.0
950
%Fixt.
37.4
58.4
87.2
100.0
100.0
60
1900
0
15
0.0
30
Horiz 0-180
45.0
45
90.0
Test 15.00192 Test Date 05/14/2014
LUMINAIRE DATA
Luminaire
Ballast
Ballast Factor
Lamp
Fixture Lumens
Watts
Mounting
Shielding Angle
Spacing Criterion
Luminous Opening
in feet
ENERGY DATA
LJT14-40HL-XXA12-EDU
LJT LED, Lensed Troffer
x 4 led with A12 pattern acrylic
prismed lens
D15C55UNVTC
1.00
LED
4755
50.50
Recessed
0º = 90 90º = 90
0º = 1.23 90º = 1.13
Length: 3.81
Width: 0.83
Height: 0.00
INDOOR CANDELA PLOT
Total Luminaire Efficiency
100.0%
Total Lumens per Watt
ANSI/IESNA RP-1-2004
Compliance
Comparative Yearly Lighting
Energy Cost per 1000 Lumens
94
Noncompliant
90
$2.53 based on
3000 hrs. and
$0.08 per KWH
75
ZONAL LUMEN SUMMARY
Zone
0-30
0-40
0-60
0-90
0-180
Lumens %Lamp
1780
2775
4145
4755
4755
37.4
58.4
87.2
100.0
100.0
1200
%Fixt.
37.4
58.4
87.2
100.0
100.0
60
2400
0
15
0.0
Page 2/3 Rev. 11/06/15
© 2015 Columbia Lighting, a division of Hubbell Lighting, Inc. Specifications subject to change without notice.
701 Millennium Blvd. Greenville, SC 29607 / Tel 864.678.1000 / Website www.columbialighting.com
30
Horiz 0-180
45.0
45
90.0
LED / LJT14
Catalog Number:
LJT14-40HLG-FAA12-EDU
Submitted by ESL-Spectrum
Job Name:
IndyGo - Facility Upgrades Project
Engineer: Parsons Brinckerhoff
(Indianapolis)
Type:
M
Notes:
INDY16-44005
LJT14
1' × 4', LED Troffer
DIMENSIONAL DATA
CEILING COMPATIBILITY
FK14 Flange Kit
Type G
End View
413⁄16"
End
1/2"
225⁄8"
225⁄8"
15"
13/16"
15"
1/4"
Ø
33⁄4"
33⁄4"
481⁄16"
Side View
471⁄16"
481⁄16"
End
Side
For lay-in installation in exposed grid
ceilings. Maximum tee widths of 1" and
maximum tee heights of 2" allowed.
12"
Top View
Side
47⁄16"
1"
7⁄8 KOS, 2 PLCS
For hard ceiling applications, order FK14 flange kit. Flange
kit wires directly into concealed ceiling opening for a clean,
finished appearance.
For flanged fixtures in
FKCR
row configurations, the
FKCR adapter bracket kit
is required in addition
to the FK14 kit. Order
one less FKCR than the
total number of fixtures
in row. (Example: Row
of two, order (2) FK14 &
(1) FKCR)
Row cut out dimensions using FK14s & FKCR adapters:
Width 123/8", Length [48" × (# in row)] + 3/8". Example: (48" × 2) + 3/8" = 963/8"
Flange kit rough in dimensions for single unit only: 123/8" × 483/8"
35⁄8"
11⁄2"
3/8"
A: 7/8" Diameter knockout
K: 2" × 3" through hole for access plate.
NOTE: All dimensions are in inches; dimensions and
specifications are subject to change without notice.
Please consult factory or check sample for verification.
DIMENSIONAL DATA - SURFACE MOUNT (SM) AND CABLE MOUNT (CM)
43"
27⁄8"
7/8"
Feed KO
27⁄8"
A
A
51⁄4" A
A
NOTE: All dimensions are in inches;
dimensions and specifications are
subject to change without notice.
Please consult factory or check
sample for verification.
91⁄2"
127⁄8"
485⁄16"
53⁄16"
Side View
End View
SURFACE MOUNT
CABLE MOUNT
Order SM ceiling type. Mounting collar required for surface
mounting. (4) Mounting knock-outs, 1⁄4" to 1⁄2" provided as
shown, marked "A".
Order CM ceiling type. Access plate supplied for cable
mounting or suspension. Use CM48Y1 C3F-KIT 48" cable mount
kit. Includes 3 wire feed cord. For other wiring needs, contact
Hubbell Lighting representative. Mounting knock-outs, 1⁄4" to
1⁄2", provided as shown, marked "A".
Page 3/3 Rev. 11/06/15
© 2015 Columbia Lighting, a division of Hubbell Lighting, Inc. Specifications subject to change without notice.
701 Millennium Blvd. Greenville, SC 29607 / Tel 864.678.1000 / Website www.columbialighting.com
LED / LJT14
Catalog Number:
NRG-406-2
Submitted by ESL-Spectrum
Job Name:
IndyGo - Facility Upgrades Project
Engineer: Parsons Brinckerhoff
(Indianapolis)
Type:
N
Notes:
INDY16-44005
ceiling mount
Cat. #
Approvals
Job
Type
nrg®400 series
lumasquare® I
Outdoor Lighting
applications
• Efficient lighting distribution and good uniformity for commercial and industrial applications, such as interior
lighting for offices, lobbies, stairwells, corridors, parking garages, and storage areas. Aesthetic appearance and
durable construction permit outdoor and indoor security lighting for walkways, apartments, schools, hotels, motels,
and commercial building
Specifications
• Unique prismatic polycarbonate refractor for low brightness and even distribution.
• One-piece, injection molded, bronze polycarbonate housing. Permanent color with textured finish. Very low
profile - 5 inch height. Concealed latching. Ideal for indoor and outdoor damp applications. Two point mounting for
stability
• Reflector for HPS is hydroformed aluminum with Anodal® finish for maximum reflectivity. (Reflector reduces
glare by shielding the arc tube from normal viewing angles.) Fluorescent reflector is aluminum with white high
reflectance finish. IES Type V distribution
• HPS has Class H normal power factory reactor ballast. -40°F starting, 60 Hz, 120 volt only. Fluorescent: (2) 120V,
13W reactor ballasts (lamps instant start down to 32°F). (2) 120V, 28W reactor ballasts (lamps start down
to -20°F). Lamp included. HPS is B-17 clear medium base. Fluorescent is (2) 13W twin tube, or (2) 28W 15mm
Quad tube, single ended
listings
• Listed to UL1598 for damp locations indoor and outdoor
A
B
A
B
10” square
254 mm square
5”
127 mm
ordering information
Catalog Number1
Ballast Type
Min. Start Temp
Input Amps
Weight
lbs. (kg)
-40F
1.8
6 (2.7)
Wattage
Voltage
50
120
NRG-406-21
2 x 13
120
Preheat
32F
.7
5 (2.3)
NRG-4561
2 x 28
120
NPF Reactor
-20F
1.2
6 (2.7)
High Pressure Sodium
NRG-4011
1
Note:
Reactor
Fluorescent
CSA certified for outdoor applications only; UL indoor/ outdoor, NRG-406 uses GX23 base,
NRG-456 uses GX32d-3 base lamps
Lamp included
Accessories - Order Separately
Catalog Number
S-319-B
S-314-B
S-319-B
S-319-B
S-329-B
Description
4” Cast aluminum round junction box for surface conduit mounting with two mounting lugs, four 1/2”
tapped hubs, and three plugs; leaves fixture 2” from ceiling
Replacement Part
Catalog Number
264-0225-9904
Description
Replacement refractor with molded hinges
photometric reports
Catalog Number
nrg-401
GLN-1-G
nrg-406-2
nrg-456
Report #
NM-BC hp02075.ies 1414
hp03243.ies
hp05001.ies
Due to our continued efforts to improve our products, product specifications are subject to change without notice.
Hubbell Outdoor Lighting • 701 Millennium Boulevard • Greenville, SC 29607 • phone: 864-678-1000
For more information visit our web site: www.hubbelloutdoor.com
Outdoor Lighting
Copyright © 2011 HUBBELL lighting All Rights Reserved nrg400-spec8/11 Printed in USA
Catalog Number:
Type:
HBLHO-72LU-A2-5K-W-092-CDX
Submitted by ESL-Spectrum
Job Name:
IndyGo - Facility Upgrades Project
Engineer: Parsons Brinckerhoff
(Indianapolis)
Notes:
P
INDY16-44005
CAT.#
APPROVALS
JOB
TYPE
SPECIFICATIONS
Applications
The NEW Hubbell LED Highbay is designed to efficiently light any
large interior space such as heavy industrial settings, warehouses,
gyms, churches, swimming pools/natatorium and shopping malls.
Well sealed design works well for food processing applications.
Construction • High performance LED design delivering up to 100 lumens per watt
• LED count 72
• LED driven at 920 mA
• Minimum operating temperature of -40˚C
• Fixture weight: 29 lbs. Shipped weight: 33 lbs.
• UL Sanitation listed for food processing
A
B
DIMENSIONS
C
A
B
C
A
Optics/Electrical System • Custom engineered LED optics providing optimally controlled and evenly
distributed light
• Three distinct distributions: aisle, narrow and wide
• Sealed optic for long life and durability
A
HBLHO
A
LED Light Engine • High output LEDs
• 100,000 hours, long life at L70
• 2700-5000°K Color Temperature - See ordering logic for more information
• 68 CRI on 5000˚K and 80 CRI on 27K, 3K, 35K and 4K options
B
AB
C
18”11” 6”
D
Thermal Performance # of LEDs
HBLHO
72
40˚C
C
A
B
C
D
Listings -
LED Driver • Circuit Loading Information
• 1.50 amps @ 120v 60 Hz
• 0.75 amps @ 240v 60 Hz
• 0.65 amps @ 277v 60 Hz
• Power factor greater than 0.90
• Standard 0 to 10v dimmable drivers
• FCC 47CFR Part 15 Class B Compliant
• CSA tested to UL1598 Wet Location, IP56
Warranty • Five years from date of purchase
ORDERING INFORMATION
ORDERING EXAMPLE: HBLHO-72LU-A2-5K-N-070-ND-WH
HBLHO
Series
092
# of LEDs
Voltage
Mount
Hub
SERIES
HBLHO
High Output Highbay HBL Series
NUMBER OF LEDS
72L
72 High Performance LEDs
120 - 277V
1120V
2208V
3240V
4277V
Note: Voltage must be specified for Fusing and
Occupancy Sensor compatibility.
MOUNT
APendant
CCone
S
Straight stanchion
XCeiling
YYoke
Distribution
HUB
DRIVE CURRENT
2¾”
092
Drive
Current
920 MA
Available with A, C, X and Y Mount
VOLTAGE
U
Color
Temp
31”
Available with A, C, X Mount
4
5
1 ¼”
1 ½”
Available with S Mount
COLOR TEMPERATURE
27K
3K
2700˚ Kelvin - 80 CRI
3000˚ Kelvin - 80 CRI
35K
4K
5K
3500˚ Kelvin - 80 CRI
4000˚ Kelvin - 80 CRI
5000˚ Kelvin - 68 CRI
Note: See Color Temperature De-Rating factors
table on pg.2
DISTRIBUTION
NNarrow
WWide
AAisle
DIMMING
CD
ND
Continous Dimming
Non Dimming
Dimming
Colors
ACCESSORIES
COLORS
BLBlack
GRGrey
WHWhite
Options
Notes:1.OCS unavailable with SL, ENCA or
ENCG. OCS and WIH options can not be
specified together
2.WIH only available with 120V or 277V
3.-F(X) Fixture fuse. Replace X with voltage:
1-120V, 2-208V, 3-240V, 4-277V
4. Wire Guard and SL Lens cannot be
used together.
(order as separate part #)
HOOK/LOOP
BLA-C4HLPX
Fixture Mounting Hook
Cord and Plug Set
LG2S
DUAL-LITE 250 VA LiteGear
Emergency Lighting Inverter
OPTIONS
F(x)
Fusing (replace “x” with voltage)
ENCA
Frosted Acrylic Protective Lens
ENCG
Glass Protective Lens
OCS360 360˚ Lens Occupancy Sensor
OCSA
WG
WIH
Aisle Lens Occupancy Sensor
Bottom Wire Guard4
Wireless Control System
SL Sag Lens, Translucent White
FP UL Sanitation, Food Processing
HIL0082 HBLHO Spec
Catalog Number:
Type:
HBLHO-72LU-A2-5K-W-092-CDX
Submitted by ESL-Spectrum
Job Name:
IndyGo - Facility Upgrades Project
Engineer: Parsons Brinckerhoff
(Indianapolis)
Notes:
P
INDY16-44005
pg 2
MOUNTING OPTIONS
PENDANT MOUNT
CONE MOUNT
STANCHION (0˚) MOUNT
CEILING MOUNT
347V/480V MOUNTING - Consult factory for availability.
COLOR TEMPERATURE DE-RATING FACTORS
NUMBER
OF LEDS
347v/480v to 277v
Step-Down Power Hook
17.5”
72
Narrow
Aisle
Wide
5000K
21010
19149
20208
4000K
17439
15894
16773
3500K
17229
15703
16570
3000K
16598
15128
15964
2700K
15968
14553
15358
277v HBL Fixture
ORDERING INFORMATION
MOUNTING ACCESSORIES
OPTIONS FOR
HBL/HO LED HIGHBAY SERIES
(order separately)
Plugs are twist-lock® type as manufactured by hubbell wiring devices.
Factory installed ­– order with fixture by adding suffix.
CORD, HOOK/LOOP
-C4HL
4’ Cord, Hook/Loop
-C6HL
6’ Cord, Hook/Loop
-C8HL
8’ Cord, Hook/Loop
-C10HL
10’ Cord, Hook/Loop
-C12HL
12’ Cord, Hook/Loop
x= 120V
4’ Cord, Hook/Loop and 120V 20A Twist-Lock® Plug
BLA-C4HLP-4
4’ Cord, Hook/Loop and 277V 20A Twist-Lock® Plug
BLA-C4HLP1-15A
4’ Cord, Hook/Loop and 120V 15A Twist-Lock® Plug
BLA-C4HLP4-15A
HOOK/LOOP1
4’ Cord, Hook/Loop and 277V 15A Twist-Lock® Plug
converts to Loop with strap included
Hook - cast aluminum 3/4” NPS male; includes safety screw; H34AL341 Swivel Aligner - complete with box for thru wiring; all hubs
1
CORD, HOOK/LOOP & 20A PLUG
Length
BLA-C4HLP-1
tapped for 3/4” conduit - 25° swivel
Cord, Hook/Loop and Plug must be added to fixture as option, example: -c2hlp4.
NOTE: Cord used with above accessories is 16/3 SOWA 105°C NEMA configurations.
208V
240V
277V
-C4HLP (X)
4’ 1
2
3
4
-C6HLP (X)
6’ 1
2
3
4
-C8HLP (X)
8’
1
2
3
4
-C10HLP (X)
10’ 1
2
3
4
-C12HLP (X)
12’ 1
2
3
4
CORD, HOOK/LOOP & 15A PLUG
208V
240V
277V
-C4HLP(X)-15a Length
4’ x= 120V
1
2
3
4
-C6HLP(X)-15a 6’ 1
2
3
4
-C8HLP(X)-15a 8’ 1
2
3
4
-C10HLP(X)-15a 10’ 1
2
3
4
-C12HLP(X)-15a 12’ 1
2
3
4
NOTE: 1. Plugs are twist-lock® type as manufactured by hubbell wiring devices
2. Pendant or Cone Mount Only - A and C Mount Only with 2 Hubb (3/4”)
WI-HUBB
WIH
Wireless control system
WARNING: Improper selection, installation, operation, servicing, removal, and disposal of lighting products
may create serious hazardous including fires, explosions, shock, burns, cuts, impaired vision, falling objects,
and environmental contamination. Reduce risks by using luminaire retainers/safety cables of equipment, the
guidance of licensed professionals throughout the product life cycle, and following individual product, component, and accessory safety instructions and labels. We offer this in the interest of safety for our customers,
who may not be aware of the potentially high risk involved in the misuse of these products.
Due to our continued efforts to improve our products, specifications are subject to change
without notice. Copyright © 2014 Hubbell Lighting All Rights Reserved.
For more information visit our web site: http://www.hubbellindustrial.com/
Phone: 1-864-678-1000
HIL0082 HBLHO Spec - B 3/15
Catalog Number:
Type:
HBLHO-72LU-A2-5K-W-092-CDX-OCS360
Submitted by ESL-Spectrum
Job Name:
IndyGo - Facility Upgrades Project
Engineer: Parsons Brinckerhoff
(Indianapolis)
Notes:
P1
INDY16-44005
CAT.#
APPROVALS
JOB
TYPE
SPECIFICATIONS
Applications
The NEW Hubbell LED Highbay is designed to efficiently light any
large interior space such as heavy industrial settings, warehouses,
gyms, churches, swimming pools/natatorium and shopping malls.
Well sealed design works well for food processing applications.
Construction • High performance LED design delivering up to 100 lumens per watt
• LED count 72
• LED driven at 920 mA
• Minimum operating temperature of -40˚C
• Fixture weight: 29 lbs. Shipped weight: 33 lbs.
• UL Sanitation listed for food processing
A
B
DIMENSIONS
C
A
B
C
A
Optics/Electrical System • Custom engineered LED optics providing optimally controlled and evenly
distributed light
• Three distinct distributions: aisle, narrow and wide
• Sealed optic for long life and durability
A
HBLHO
A
LED Light Engine • High output LEDs
• 100,000 hours, long life at L70
• 2700-5000°K Color Temperature - See ordering logic for more information
• 68 CRI on 5000˚K and 80 CRI on 27K, 3K, 35K and 4K options
B
AB
C
18”11” 6”
D
Thermal Performance # of LEDs
HBLHO
72
40˚C
C
A
B
C
D
Listings -
LED Driver • Circuit Loading Information
• 1.50 amps @ 120v 60 Hz
• 0.75 amps @ 240v 60 Hz
• 0.65 amps @ 277v 60 Hz
• Power factor greater than 0.90
• Standard 0 to 10v dimmable drivers
• FCC 47CFR Part 15 Class B Compliant
• CSA tested to UL1598 Wet Location, IP56
Warranty • Five years from date of purchase
ORDERING INFORMATION
ORDERING EXAMPLE: HBLHO-72LU-A2-5K-N-070-ND-WH
HBLHO
Series
092
# of LEDs
Voltage
Mount
Hub
SERIES
HBLHO
High Output Highbay HBL Series
NUMBER OF LEDS
72L
72 High Performance LEDs
120 - 277V
1120V
2208V
3240V
4277V
Note: Voltage must be specified for Fusing and
Occupancy Sensor compatibility.
MOUNT
APendant
CCone
S
Straight stanchion
XCeiling
YYoke
Distribution
HUB
DRIVE CURRENT
2¾”
092
Drive
Current
920 MA
Available with A, C, X and Y Mount
VOLTAGE
U
Color
Temp
31”
Available with A, C, X Mount
4
5
1 ¼”
1 ½”
Available with S Mount
COLOR TEMPERATURE
27K
3K
2700˚ Kelvin - 80 CRI
3000˚ Kelvin - 80 CRI
35K
4K
5K
3500˚ Kelvin - 80 CRI
4000˚ Kelvin - 80 CRI
5000˚ Kelvin - 68 CRI
Note: See Color Temperature De-Rating factors
table on pg.2
DISTRIBUTION
NNarrow
WWide
AAisle
DIMMING
CD
ND
Continous Dimming
Non Dimming
Dimming
Colors
ACCESSORIES
COLORS
BLBlack
GRGrey
WHWhite
Options
Notes:1.OCS unavailable with SL, ENCA or
ENCG. OCS and WIH options can not be
specified together
2.WIH only available with 120V or 277V
3.-F(X) Fixture fuse. Replace X with voltage:
1-120V, 2-208V, 3-240V, 4-277V
4. Wire Guard and SL Lens cannot be
used together.
(order as separate part #)
HOOK/LOOP
BLA-C4HLPX
Fixture Mounting Hook
Cord and Plug Set
LG2S
DUAL-LITE 250 VA LiteGear
Emergency Lighting Inverter
OPTIONS
F(x)
Fusing (replace “x” with voltage)
ENCA
Frosted Acrylic Protective Lens
ENCG
Glass Protective Lens
OCS360 360˚ Lens Occupancy Sensor
OCSA
WG
WIH
Aisle Lens Occupancy Sensor
Bottom Wire Guard4
Wireless Control System
SL Sag Lens, Translucent White
FP UL Sanitation, Food Processing
HIL0082 HBLHO Spec
Catalog Number:
Type:
HBLHO-72LU-A2-5K-W-092-CDX-OCS360
Submitted by ESL-Spectrum
Job Name:
IndyGo - Facility Upgrades Project
Engineer: Parsons Brinckerhoff
(Indianapolis)
Notes:
P1
INDY16-44005
pg 2
MOUNTING OPTIONS
PENDANT MOUNT
CONE MOUNT
STANCHION (0˚) MOUNT
CEILING MOUNT
347V/480V MOUNTING - Consult factory for availability.
COLOR TEMPERATURE DE-RATING FACTORS
NUMBER
OF LEDS
347v/480v to 277v
Step-Down Power Hook
17.5”
72
Narrow
Aisle
Wide
5000K
21010
19149
20208
4000K
17439
15894
16773
3500K
17229
15703
16570
3000K
16598
15128
15964
2700K
15968
14553
15358
277v HBL Fixture
ORDERING INFORMATION
MOUNTING ACCESSORIES
OPTIONS FOR
HBL/HO LED HIGHBAY SERIES
(order separately)
Plugs are twist-lock® type as manufactured by hubbell wiring devices.
Factory installed ­– order with fixture by adding suffix.
CORD, HOOK/LOOP
-C4HL
4’ Cord, Hook/Loop
-C6HL
6’ Cord, Hook/Loop
-C8HL
8’ Cord, Hook/Loop
-C10HL
10’ Cord, Hook/Loop
-C12HL
12’ Cord, Hook/Loop
x= 120V
4’ Cord, Hook/Loop and 120V 20A Twist-Lock® Plug
BLA-C4HLP-4
4’ Cord, Hook/Loop and 277V 20A Twist-Lock® Plug
BLA-C4HLP1-15A
4’ Cord, Hook/Loop and 120V 15A Twist-Lock® Plug
BLA-C4HLP4-15A
HOOK/LOOP1
4’ Cord, Hook/Loop and 277V 15A Twist-Lock® Plug
converts to Loop with strap included
Hook - cast aluminum 3/4” NPS male; includes safety screw; H34AL341 Swivel Aligner - complete with box for thru wiring; all hubs
1
CORD, HOOK/LOOP & 20A PLUG
Length
BLA-C4HLP-1
tapped for 3/4” conduit - 25° swivel
Cord, Hook/Loop and Plug must be added to fixture as option, example: -c2hlp4.
NOTE: Cord used with above accessories is 16/3 SOWA 105°C NEMA configurations.
208V
240V
277V
-C4HLP (X)
4’ 1
2
3
4
-C6HLP (X)
6’ 1
2
3
4
-C8HLP (X)
8’
1
2
3
4
-C10HLP (X)
10’ 1
2
3
4
-C12HLP (X)
12’ 1
2
3
4
CORD, HOOK/LOOP & 15A PLUG
208V
240V
277V
-C4HLP(X)-15a Length
4’ x= 120V
1
2
3
4
-C6HLP(X)-15a 6’ 1
2
3
4
-C8HLP(X)-15a 8’ 1
2
3
4
-C10HLP(X)-15a 10’ 1
2
3
4
-C12HLP(X)-15a 12’ 1
2
3
4
NOTE: 1. Plugs are twist-lock® type as manufactured by hubbell wiring devices
2. Pendant or Cone Mount Only - A and C Mount Only with 2 Hubb (3/4”)
WI-HUBB
WIH
Wireless control system
WARNING: Improper selection, installation, operation, servicing, removal, and disposal of lighting products
may create serious hazardous including fires, explosions, shock, burns, cuts, impaired vision, falling objects,
and environmental contamination. Reduce risks by using luminaire retainers/safety cables of equipment, the
guidance of licensed professionals throughout the product life cycle, and following individual product, component, and accessory safety instructions and labels. We offer this in the interest of safety for our customers,
who may not be aware of the potentially high risk involved in the misuse of these products.
Due to our continued efforts to improve our products, specifications are subject to change
without notice. Copyright © 2014 Hubbell Lighting All Rights Reserved.
For more information visit our web site: http://www.hubbellindustrial.com/
Phone: 1-864-678-1000
HIL0082 HBLHO Spec - B 3/15
Catalog Number:
TRV/X-24NB/27-5K-T3-UNVDBT
Submitted by ESL-Spectrum
Job Name:
IndyGo - Facility Upgrades Project
Engineer: Parsons Brinckerhoff
(Indianapolis)
Type:
S1
Notes:
INDY16-44005
Type:
rev. 09.21.2015
Project Name:
TRAVERSE (LED)
Traverse Wall Pack
Max Weight: 24.0 lbs
Notes:
design . performance . technology
www.beaconproducts.com
Sample
TRV-D
Ordering
60NB-136
/
A
5K
/
B
T5R
UNV
/
C
/
D
DETAILS
GENIXX
/
E
PEC
/
F
G
A. MODEL
12 1/2”
BBT
/
H
F. CONTROL OPTIONS
TRV-D
Traverse down light
TRV-U
Traverse up light (lens req.) 1
GENI-XX
Energeni 7
G. ELECTRICAL OPTIONS
7 1/4”
Side View
B. ENGINE-WATTS
PEC
photocell, button
24NB-27
27 Watts - LED array
2PF
dual power feed 2,3
24NB-55
55 Watts - LED array
MOB
motion sensor 33% or
50%
36NB-80
80 Watts - LED array
48NB-110
110 Watts - LED array
OCS
occupancy sensor (on/off)
60NB-136
136 Watts - LED array
BPC
cold weather battery
pack 4
dimming 5,6
14”
C. CCT - COLOR TEMP
H. COLOR
3K
3000K
BBT
basic black textured
4K
4000K
BMT
black matte textured
5K
5000K (std.)
WHT
white textured
Front View
D. OPTICS
Top View
metallic bronze textured
BZT
bronze textured
T2
type II
DBT
dark bronze textured
T3
type III
GYS
gray smooth
T4
type IV
DPS
dark platinum smooth
T5R
type V, rectangular
GNT
green textured
2X2
narrow spot flood
MST
metallic silver textured
5X5
medium flood
MTT
metallic titanium textured
E. VOLTAGE
Bottom View
MBT
UNV
120-277V
347
347V
480
480V
OWI
old world iron
RAL
______________
MOB ORDERING INFORMATION: When ordering a fixture with the motion detection option (MOB), please specify the appropriate information. These settings
are specified in the ordering as shown in the example below.
33% or 50% - _____
?? / MT
1 to 30 min. - __________
TRV-D / 48E-63 / AMB / T5SW / 180 / UNV / MOB - __________
High to Dim Delay
1
Low Level
Mounting Height (ft.)
indoor use only
2
not available on 240NB-27
3
not available @ 347V or 480V input
4
36NB-80 only
5
not available on 48NB-110
6
not available on 60NB-136
When ordering Energeni, specify the routine setting code (example GENI-04). See Energeni
brochure and instructions for setting table and options. Not available with sensor options.
7
2041 58th Avenue Circle East Bradenton, fl 34203
Phone: (800) 345-4928
Fax: (941) 751-5535
ORDERING
Submitted by ESL-Spectrum
Job Name:
IndyGo - Facility Upgrades Project
Engineer: Parsons Brinckerhoff
(Indianapolis)
Catalog Number:
TRV/X-24NB/27-5K-T3-UNVDBT
Type:
S1
Notes:
INDY16-44005
rev. 09.21.2015
TRAVERSE (LED)
Traverse Wall Pack
Max Weight: 24.0 lbs
design . performance . technology
General: The Beacon TRV luminaire is a wall surface mounted luminaire with a field replaceable LED light engine & optical bezel system. Internal components are totally enclosed in
rain-tight and corrosion-resistant die cast aluminum housing. The TRV Luminaire is suitable
for wet locations.
Housing/LED Thermal Management: The Beacon TRV luminaire consists of a die cast
aluminum two-piece housing. The die cast main (thermal) housing provides direct heat exchange between the LED light engine and the cool outdoor air by drawing heat through
integral heat channels and out to the sculptured and functional luminaire surface. LED drivers
are thermally isolated from the main housing, mechanically attached and heat sinked to the
rear housing The main housing is designed with heat dissipating fins for LED thermal management without the use of metallic screens, cages, or fans. The shape of the main housing is
designed to prevent debris accumulation and as a bird nesting deterrent. The back and main
housings are designed to hinge open for easy mounting and easy access.
Mounting & Installation: The rear housing (back plate) is designed with various bolt patterns for direct wall mounting or mounting to a recessed 4” junction box. The rear housing
has three integral 3/4” NPT power feed locations (bottom and each side) for surface mounted
conduit applications. After mounting the rear housing to the wall or junction box, the main
housing is designed to hang and hinge closed after connecting the male and female quick
connectors. The mounting design permits a simple retrofit to existing wall luminaires that
utilize surface mount or recessed junction boxes.
Bezel Optical System: Each Traverse luminaire is supplied with an Optical one piece cartridge system consisting of an LED engine, LED lamps, optics, gasket and stainless steel
bezel. The cartridge is held together with internal brass standoffs soldered to the board so
that it can be field replaced as a one piece Optical system. A two-piece die cut silicone and
polycarbonate foam gasket ensures a weather-proof seal around each individual LED and
allows the Traverse luminaire to be rated for high-pressure hose down applications.
The optical cartridge is secured to the extruded housing with fasteners and a heat pad to
ensure thermal conductivity. The optics are held in place without the use of adhesives and
the complete assembly is gasketed for high pressure hose down cleaning. The cartridge
assembly is available in various lighting distributions using TIR designed Acrylic optical lenses
over each LED.
Printed Circuit Board (PCB): Aluminum thermal clad board with 0.062” thick aluminum
base layer “high temperature” HT-06503 or equivalent (subject to change) dielectric (0.003”
thick, thermal conductivity of 2.2 W/MK, UL RTI of 140°C) 0.0014” thick copper circuit layer
Circuit layer designed with copper pours to minimize thermal impedance across dielectric.
Board shall be supplied with QPAD-3 fiberglass reinforced thermal pad 0.005” thick thermal
conductivity of 2.0 W/Mk. Continuous use temperature of 180°C UL94 V-0. Board will be
mounted to the heat sink using 12 #4-40 screws to ensure contact with thermal pad and heat
sink. Use of thermal grease will not be allowed.
LifeShield™ Circuit: (optional) Thermal circuit shall protect the luminaire from excessive
temperature by interfacing with its 0-10V dimmable drivers to reduce drive current as necessary. The factory-preset temperature limits shall be designed to ensure maximum hours
of operation to assure L70 rated lumen maintenance. The device shall activate at a specific,
factory-preset temperature, and progressively reduce power over a finite temperature range
in recognition of the effect of reduced current on the internal temperature and longevity of the
LEDs and other components.
A luminaire equipped with the device may be reliably operated in any ambient temperature
up to 55ºC (131ºF).
The LifeShield™ thermal regulation circuit will allow higher maximum Wattages than would
be permissible on an unregulated luminaire (if some variation in light output is permissible),
without risk of premature LED failure. Operation shall be smooth and undetectable to the eye.
Thermal circuit shall directly measure the temperature at the LED solder point. LifeShield™
shall consist of surface mounted components mounted on the LED engine (printed circuit
board). For maximum simplicity and reliability, the device shall have no dedicated enclosure,
circuit board, wiring harness, gaskets, or hardware. Device shall have no moving parts, and
shall operate entirely at low voltage (NEC Class 2). The device shall be located in an area of
the luminaire that is protected from the elements.
LifeShield™ shall be designed to “fail on”, allowing the luminaire to revert to full power in the
event of an interruption of its power supply, or faulty wiring connection to the drivers.
Device shall be able to co-exist with other 0-10V control devices (occupancy sensors, external dimmers, etc.). The device will effectively control the solder point temperature as needed;
otherwise it will allow the other control device(s) to function unimpeded.
Motion Activated Luminaires: Beacon TRV luminaires are available with an optional passive infrared (PIR) motion sensor capable of detecting motion within 24 feet of the sensor,
360° around the luminaire, when placed at an 8 foot mounting height. When no motion is
detected for 5 minutes, the Motion Response system reduces the Wattage from 10% to 50%
(factory set at 50% reduction) of the maximum Wattage, reducing the light level accordingly.
When motion is detected by the PIR sensor, the luminaire returns to full Wattage and full
2041 58th Avenue Circle East Bradenton, fl 34203
Phone: (800) 345-4928
light output. Please contact Beacon Products if project requirements vary from standard
configuration.
Electrical: Luminaires are equipped with an LED driver that accepts 100V through 277V,
50 Hz to 60 Hz (UNIV), or a driver that accepts 347V or 480V input. Power factor is .92
at full load. All electrical components are rated at 50,000 hours at full load and 40°C
ambient conditions per MIL-217F Notice 2. Optional 0 to 10 volt dimming drivers are
available upon request. Component-to-component wiring within the luminaire may carry
no more than 80% of rated load and is listed by UL for use at 600VAC at 50°C or higher.
Plug disconnects are listed by UL for use at 600 VAC, 15A or higher. 15A rating applies
to primary (AC) side only.
Surge Protector: The on-board surge protector shall be a UL recognized component
for the United States and Canada and have a surge current rating of 20,000 Amps using
the industry standard 8/20 pSec wave. The LSP shall have a clamping voltage of 825V
and surge rating of 540J. The case shall be a high-temperature, flame resistant plastic
enclosure.
Cold Weather Battery Pack: The emergency driver shall be capable of operating an
LED load of up to 23.1 Watts at rated current (700 mA) for a minimum of 90 minutes. It is
suitable for damp locations as well as sealed and gasketed fixtures. The BPC shall have
37 Watts of input power and a 54.0 Watts-hour battery capacity and shall comply with
emergency standards set forth by the current NEC.
Fasteners: All fasteners shall be stainless steel. When tamper resistant fasteners are
required, spanner HD (snake eye) style shall be provided (special tool required, consult
factory).
Power Supply/Driver Requirements: U.L. UL1310, Class 2 and UL48 compliant
Color Rendering Index (CRI): Luminaire shall have a minimum CRI of 67 at 5000K.
Operating Environment: Shall be able to operate normally in ambient temperatures
from -40°C to 40°C.
Finish: Finish shall be a Beacote V polyester powder-coat electro-statically applied and
thermocured. Beacote V finish shall consist of a five stage iron phosphate chemical
pretreatment regimen with a polymer primer sealer, oven dry off, and top coated with
a thermoset super TGIC polyester powder coat finish. The finish shall meet the AAMA
605.2 performance specification which includes passing a 3000 hour salt spray test for
corrosion resistance and resists cracking or loss of adhesion per ASTM D522 and resists
surface impacts of up to 160 inch-pound.
Agency Certification: The luminaire shall bear a CSA label and be marked suitable for
wet locations.
Warranty: Beacon luminaires feature a 5 year limited warranty. Beacon LED luminaires
with LED arrays feature a 5 year limited warranty covering the LED arrays. LED drivers are
covered by a 5 year limited warranty. PIR sensors carry a 5 year limited warranty from the
sensor manufacturer. See Warranty Information on www.beaconproducts.com complete
details and exclusions.
Power/Lumens & Distribution
Engine
Wattage
Delivered
TM21 Calculated % Lumen
Delivered
Lumens
Maint.
LPW
at 100,000 hrs
(varies by optic)
24NB
27
2752-3014
105-115
96.19%
24NB
55
5138-5500
93-100
96.19%
36NB
80
6935-8215
93-103
94.87%
48NB
110
10240-10950
93-103
92.73%
60NB
136
12800-13700
93-103
85.79%
TM21 is the framework for taking LM-80 data and making useful LED lifetime projections. Reported and Calculated Lifetimes shown are based on hours at the time of
this printing. For current Reported and Calculated hours please contact factory or
Beacon’s web-site.
CCT (COLOR TEMP)
Lumen Output
Multipliers
CRI
(Color Rendering)
5000K = 1.0
min 67 CRI
4000K = .92
min 70 CRI
3000K = .75
min 80 CRI
Due to our continued efforts to improve our products, product specifications are subject to change
without notice.
Fax: (941) 751-5535
SPECIFICATION
Catalog Number:
Submitted by ESL-Spectrum
Job Name:
IndyGo - Facility Upgrades Project
Engineer: Parsons Brinckerhoff
(Indianapolis)
Type:
A670TSRLED991/480WB/
4ARC45T3/MDL03/SRR1HSS/BKT
W1
Notes:
INDY16-44005
A670TSR LED YALE SERIES LumInAIRE DESIGn
• the luminaire shall be a stylized victorian acorn fixture provided
with a decorative cast aluminum fitter, a polycarbonate or acrylic
clear textured acorn and a cast aluminum cage and roof.
• the luminaire shall be appointed with a cast aluminum decorative
4-vane finial.
• the luminaire shall have LeD light sources and roof mounted,
down-lighting optics.
• the luminaire shall be 18” diameter and 38 5 / 8” over-all height.
• the luminaire shall be e.t.L. or U.L. listed in U.S. and canada.
FITTER - STAnDARD
• the fitter shall be heavy wall cast aluminum, 356 alloy for high
tensile strength.
• it shall have an 8 1 / 2” inside diameter opening to attach to the 8”
neck of the acorn globe.
• When ordered with a Sternberg aluminum pole, the fitter shall be
welded to the pole top or tenon for safety and to ensure the fixture
will be plumb, secure and level over the life of the installation.
• the fitter shall have a one- piece ring bug gasket to resist insect
penetration into lamp assembly.
LED Lighting Caged Acorns
SpecificationS
Cast
Aluminum
Finial
A670TSRLED
508P
Cast
Aluminum
Roof
LED Roof Mounted
Optics
Cast
Aluminum
Cage
Polycarbonate
or Acrylic
Textured Lens
Cast Aluminum
508 Fitter
Cast
Aluminum
Finial
A670TSRLED
990
Cast
Aluminum
Roof
LED Roof Mounted
Optics
Cast
Aluminum
Cage
990 FITTER SERIES OPTIOn
• the fitter shall be heavy wall cast aluminum, 360 die cast alloy
for high tensile strength.
• it shall have a 9 1/ 4” inside diameter opening to attach to the 8”
neck of the acorn globe.
• it shall have a hinged, tool-less entry door that provides open
EPA = 1.40 (ft 2)
WEIGHT = 48 LBS
access to all of the components.
• the 990 shall have an optional terminal block for ease of wiring, an
Rated IP65
optional twist-Lock photocell receptacle, an optional Gfci outlet for
auxiliary power needs.
• the top mounted ballast mounting plate shall be cast aluminum and provide tool-less removal from the
housing using 2 finger latches.
• When ordered with a Sternberg aluminum pole, the fitter shall be set screwed to the pole top or tenon.
• the fitter shall have a one- piece ring bug gasket to resist insect penetration into lamp assembly.
• When supplied with Gfi receptical a hole will be provided for cord and plug installation with the access
door closed.
• When cord and plug is not in use a filler plug will be provided and shall be tethered to the fitter for easy
recovery and installation.
LIST NO.
A670TSR LED
YALE
SERIES
DRIvER
• the LeD driver shall be securely mounted inside the fitter, for optimized performance and longevity.
Polycarbonate
or Acrylic
Textured Lens
Cast Aluminum
990 Fitter
1-14
(Continued on next page)
Catalog Number:
Submitted by ESL-Spectrum
Job Name:
Type:
A670TSRLED991/480WB/
4ARC45T3/MDL03/SRR1HSS/BKT
IndyGo - Facility Upgrades Project
Engineer: Parsons Brinckerhoff
(Indianapolis)
W1
Notes:
INDY16-44005
LED Lighting Caged Acorns
A670TSR LED YALE SERIES LIST NO.
A670TSR LED
YALE
SERIES
SpecificationS
LIGHT SOuRCES
• the luminaire shall use high output, high brightness LeDs.
• the LeDs shall be mounted in arrays, on printed circuit boards designed to maximize heat transfer to the
heat sink surface.
• the LeDs shall be attached to the printed circuit board with not less than 90% pure silver to insure optimal
electrical and thermal conductivity.
• the LeDs and printed circuit boards shall be protected from moisture and corrosion by a conformal coating
of 1 to 3 mils.
• the LeDs and printed circuit board construction shall be environmentally friendly and 100% recyclable.
they shall not contain lead, mercury or any other hazardous substances and shall be RoHS compliant.
• the LeD life rating shall be determined in accordance with LM-80.
LIGHT SOuRCE
6ARC62T-MDL05
T2
SPEC LumEnS
9975
T3
SPEC LumEnS
10270
T3R
SPEC LumEnS
10185
T5
SPEC LumEnS
10515
WATTS
145
6ARC35T-MDL05
8755
9015
8940
9230
145
6ARC45T-MDL05
6ARC62T-MDL03
6ARC45T-MDL03
6ARC35T-MDL03
9330
7445
6960
6530
9605
7580
7090
6655
9525
7670
7170
6730
9835
7730
7230
6785
4ARC62T-MDL03
5130
5050
5080
5340
4ARC35T-MDL03
4505
4435
4460
4690
4ARC45T-MDL03
3ARC62T-MDL03
3ARC45T-MDL03
3ARC35T-MDL03
2ARC62T-MDL03
2ARC45T-MDL03
2ARC35T-MDL03
4800
3935
3680
3455
2645
2475
2320
4725
3705
3465
3250
2675
2505
2350
4750
3990
3735
3505
2685
2510
2355
4995
4040
3780
3550
2755
2580
2420
145
96
96
96
67
67
67
53
53
53
34
34
34
OPTICS
• the luminaire shall be provided with individual, acrylic, refractor type optics applied to each LeD.
• the luminaire shall provide type ___ (2, 3, 3R or 5) light distribution per the ieSna classifications.
testing shall be done in accordance with LM-79.
PERFORmAnCE
• the LeDs and LeD driver shall operate over a -40°c (-40°f) to +50°c (122°f) ambient air temperature range.
• the High performance white LeDs will have a life expectancy of approximately 70,000 hours with not less
than 70% of original brightness (lumen maintenance), rated at 25°c.
• the High Brightness, High output LeD’s shall be 4500K (3500K or 6200K option)
color temperature with a typical of 70 cRi.
• the Luminaire shall have a minimum ______ (see table) initial delivered lumen rating when operated at
steady state with an average ambient temperature of 25°c (77°f).
555 Lawrence Ave. Roselle, IL 60172 • 847- 588 - 3400 • Fax 847- 588 - 3440
www.sternberglighting.com
Email: info @ sternberglighting.com
1-14
Catalog Number:
Submitted by ESL-Spectrum
Job Name:
IndyGo - Facility Upgrades Project
Engineer: Parsons Brinckerhoff
(Indianapolis)
Type:
A670TSRLED991/480WB/
4ARC45T3/MDL03/SRR1HSS/BKT
W1
Notes:
INDY16-44005
A670TSR LED YALE SERIES LIST NO.
A670TSR LED
YALE
SERIES
LED Lighting Caged Acorns
SpecificationS
ELECTROnIC DRIvERS
• the driver shall be U.L. Listed.
• the driver shall have overload as well as short circuit protection.
• the driver shall be a Dc voltage output, constant current design, 50 /60HZ.
• the driver accepts input voltage from 120-277 (MDL). optional 347-480 (MDH).
• the driver shall have a minimum power factor of 0.90.
• the driver shall be rated at full load with tHD<20%.
• the driver is dimmable using 0-10V signal.
• the luminaire shall be supplied with line-ground, line-neutral and neutral-ground electrical surge protection in
accordance with ieee/anSi c62.41.2 guidelines.
• the LeD driver shall be supplied with a quick-disconnect electrical connector on the power supply, providing
easy power connections and fixture installation.
CAGED ACORn
• the caged acorn shall be 18” diameter and 29 1/ 2” tall with an 8” diameter neck.
• the caged acorn shall be made of _____________________ vandal resistant, clear textured polycarbonate or
dent resistant (DR) clear textured acrylic. for acrylic, add “a” to model number.
• the caged acorn shall be supplied with a cast aluminum finial and a solid, cast aluminum roof which includes
optimized heat sinks to provide maximum life and performance for the LeD light sources.
• the caged acorn shall be sealed to the cast aluminum roof to provide a moisture-free and bug-free optics
chamber for the LeD light sources and Rated IP65.
• the Luminaire shall have a distinctively styled, decorative cast aluminum cage.
ARmS
• the arms shall be cast aluminum and/or extruded aluminum.
• arms with decorative filigree shall have meticulously detailed scroll work and gracefully curved brackets.
• (All except BAPT and 779 arms) the arms shall be bolted to a post mount adaptor which is welded to the
pole to ensure proper alignment.
• (Twin TA and twin 579 arms) the arms shall be attached to a decorative center hub which will fit the center
tenon of the pole (not shown).
555 Lawrence Ave. Roselle, IL 60172 • 847- 588 - 3400 • Fax 847- 588 - 3440
www.sternberglighting.com
Email: info @ sternberglighting.com
1-14
Catalog Number:
Submitted by ESL-Spectrum
Job Name:
IndyGo - Facility Upgrades Project
Engineer: Parsons Brinckerhoff
(Indianapolis)
Type:
A670TSRLED991/480WB/
4ARC45T3/MDL03/SRR1HSS/BKT
W1
Notes:
INDY16-44005
A670TSR LED YALE SERIES LIST NO.
A670TSR LED
YALE
SERIES
LED Lighting Caged Acorns
SpecificationS
PHOTOCELL OPTIOnS
Electronic Button Cell Option
• photocells shall be electronic button type.
• on single post-top fixtures, the photocell shall be mounted in the fitter and pre-wired to the driver.
• on multiple head fixtures, photocells shall be mounted in the pole shaft, on an access plate. the photocell is not
pre-wired since drivers are mounted in the fitters and packaged separately.
• the photocell is instant-on at 1.5 foot-candles and turns off 5-10 seconds at 2-3 foot-candles.
• the photocell is 120- 277 volt.
Twist-Lock Type Option
• photocells shall be twist-lock design, thermal-bimetallic switch type.
• 990 Fitter: photocells shall be mounted in the fitter on the photocell bracket and pre-wired to the driver.
on multi-fixture poles the photocell shall be mounted on top of pole/arm/hangstraight. the photocell is not
pre-wired on multi-fixture poles since drivers are mounted in the fitters and packaged separately.
• Twist-Lock Roof option (SRR and SRR1): on single-fixture poles, the photocell shall be mounted on top of roof,
protected by a waterproof spinning and gasket; and pre-wired to the driver.
• photocell time delay is 2 minutes to turn on at 1.5 foot-candles and 2 minutes to turn off at no more than 6
foot-candles.
• the photocell is 120-277 volt..
FInISH
• prior to coating, the luminaire shall be chemically cleaned and etched in a 5-stage washing system which includes
alkaline cleaning, rinsing, phosphoric etching, reverse-osmosis water rinsing and non-chrome sealing to ensure
corrosion resistance and excellent adhesion for the finish coat.
• the finish coat shall be an electrostatically applied semi-gloss, super durable polyester powder coat, baked on at
400°f, to provide a durable, color retentive finish.
• *the optional _________ (Verde Green or Swedish iron) finish shall be hand-brushed using a 3-step process.
* (OPTION)
WARRAnTy
• the luminaire shall be free from all defects in materials and workmanship for a period of seven (7) years from the
date of manufacture.
• the luminaire manufacturer shall warrant the LeD boards/ system, during the stated warranty period, against
failure defined as more than 10% simultaneous non-operating LeDs.
• the driver shall be warranted for seven (7) years.
555 Lawrence Ave. Roselle, IL 60172 • 847- 588 - 3400 • Fax 847- 588 - 3440
www.sternberglighting.com
Email: info @ sternberglighting.com
1-14
Catalog Number:
Submitted by ESL-Spectrum
Job Name:
Type:
A670TSRLED991/480WB/
4ARC45T3/MDL03/SRR1HSS/BKT
IndyGo - Facility Upgrades Project
Engineer: Parsons Brinckerhoff
(Indianapolis)
W1
Notes:
INDY16-44005
A670TSR LED YALE SERIES
CAGED ACORnS
18” W
38
FITTERS
acoRnS / fitteRS / aRMS pM - WB
18” W
18” W
5 / 8”
46
29
5/8”
101⁄8” W
101⁄8” H
101⁄8” W
101⁄8” H
101⁄8” W
101⁄4” H
101⁄8” W
113⁄4” H
101⁄8” W
113⁄4” H
101⁄8” W
113⁄4” H
101⁄2” W
153⁄4” H
101⁄2” W
131⁄8” H
101⁄2” W
131⁄8” H
101⁄2” W
153⁄4” H
5P
(508)
Fits 3” poles
or tenons and
arms below
BD4
(508BD4)
Fits 4” poles
or tenons
BD5
(508BD5)
Fits 5” poles
or tenons
B7
(508B7)
Fits 7” poles
or tenons
BD7
(508BD7)
Fits 7” poles
or tenons
7
(708)
Fits 4” poles or
tenons - 3”
with adapter &
large arms
990
Fits 3” poles
or tenons and
large arms
994
3” Tenon
991
Fits 3” poles
or tenons and
large arms
992
Fits 3” poles
or tenons and
large arms
993
Fits 3” poles
or tenons and
large arms
995
4” Tenon
11 1/ 2 ”
11 3 / 4”
80
18 ”
21 3/ 8 ”
16
480
18 3/ 8 ”
10
3”
Only
34 ”
31 1/ 2”
TA
478
779
27 1/ 2”
16 1/ 4 ”
450PB
579
16 1/ 2 ”
11 1/ 4 ”
15 1/ 4 ”
1 / 2”
18 ”
17 7/ 8”
12 3/ 4”
15 1/ 8 ”
1-14
39WB
19 5/ 8 ”
TASCR
16 1/ 4 ”
19 7/ 8”
1/ 2 ”
17 ”
478TS
11 1/ 4”
17 3/ 4 ”
See Arms Section for more information
16 1/ 4 ”
50
(80D Downswept Arm)
15 1/ 4”
CDR- CL
Custom Logo
A670TSRLED
Polycarbonate
A670TASRLED
Acrylic
ARmS - POST mOunT (Pm) or WALL BRACKETS (WB)
10 1/ 8 ”
1 / 2”
15 1/ 4 ”
10 3/ 8 ”
6236
55
24”
55L
22 3 / 4”
BAPT
Twin Only
70
Catalog Number:
Submitted by ESL-Spectrum
Job Name:
Type:
A670TSRLED991/480WB/
4ARC45T3/MDL03/SRR1HSS/BKT
IndyGo - Facility Upgrades Project
Engineer: Parsons Brinckerhoff
(Indianapolis)
W1
Notes:
INDY16-44005
LED Caged Acorn Specifications
BUiLDinG a paRt nUMBeR
POST & ARm FIxTuRES
ARM MOUNTED FIXTURE
NO. OF
ARMS
2
ACORN/FITTER/POSTARM
CENTER
POST TOP FIXTURE
(PT)
ACORN/FITTER
A670SRLED/5P/579PT
ACORN/FITTER/WALL BRACKET
A670TSRLED/5P/50WB
LED
4ARC
PART numBER SELECTIOnS
ACORnS
• A670TSRLED 1
• A670TASRLED
FITTERS
• 5P
• 7
•
•
•
•
•
•
•
•
•
•
990
991
992
993
994
995
BD4
BD5
BD7
B7
DRIvER
VOLTS
120-277
347-480
*6ARC only
NOTES:
1 White
POST ARmS
• 50PM
• 50DPM
• 478PM
• 478TSPM
• 70PM*
• 80PM
• 80DPM
• 480PM
• 480DPM
• 55PM
• 55LPM
• 6236PM
• 579PT
• TAPT
• TASCRPT
• BAPT
PIER BASE
• 450PB
TYPE
MDL
MDH
mA
03
05*
polycarbonate acorns are available.
Specify WP after acorn number.
2 Consult factory for specification details.
3 For 990 fitter only.
LIGHT SOURCE
COLOR
45
LIGHT SOURCE
(See Post Section)
4212FP4
PT
WALL FIxTuRES
POST
CAP
POST
TYPE
T3
DRIVER
DRIVER
LED
COLOR
TYPE
6ARC
45
T5
OPTIONS
MDL03
OPTIONS
MDL03
FINISH
BKT
PIER FIxTuRES
Uses same information
boxes as wall fixture
FINISH
A670TSRLED/5P/450PB
BKT
ACORn / FITTER / PIER BASE
WALL
BRACKET
ARmS
• 50WB
• 50DWB
• 478WB
• 478TSWB
• 70WB*
• 80WB
• 80DWB
• 480WB
• 480DWB
• 55WB
• 55LWB
• 6236WB
• 579WB
• TAWB
• TASCRWB
• 39WB*
LIGHT SOuRCES*
LED
6ARC
4ARC
3ARC
2ARC
COLOR
TEMP. (K)
62(00)
45(00)
35(00)
*Consult factory for other color
temperatures
*No fitter required
TYPE
T2
T3
T3R
T5
STAnDARD FInISHES*
• BKT
Black Textured
• WHT White Textured
• PGT
Park Green Textured
• ABZT Architectural Medium
Bronze Textured
• DBT
Dark Bronze Textured
*Smooth Finishes are available upon request
CuSTOm FInISHES
• OI
Old Iron
• RT
Rust
• WBR Weathered Brown
• CD
Cedar
• WBK Weathered Black
• TT
Two Tone
STERnBERG SELECT
FInISHES
• VG
Verde Green
• SI
Swedish Iron
• OWGT Old World Gray
Textured
OPTIOnS
• PEC Photocell-Electronic 120-277 Volt
• R 3 Receptacle Only for Twist-Lock Photo Cell
• R13 Twist-Lock Photo Cell 120 - 277 Volt
• SRR Solid Roof: Receptacle Only for Twist-Lock Photo Cell
• SRR1 Solid Roof: Twist-Lock Photo Cell 120-277 Volt
• FHD Dual Fuse & Holder - 208, 240, 480 Volt
• PF per arm Pineapple Finial or Font (for TA, TASCR)
• BF per arm Ball Finial or Font (for TA, TASCR)
• CDR- CL2 Cast Decorative Ring with Custom Logo
• G 3 GFI
• HSS House Side Shield
• TB Terminal Block
555 Lawrence Ave. Roselle, IL 60172 • 847- 588 - 3400 • Fax 847- 588 - 3440
www.sternberglighting.com
Email: info @ sternberglighting.com
1-14
Catalog Number:
TRV/X-48NB/110-5K-T3-UNVPEC-DBT
Submitted by ESL-Spectrum
Job Name:
IndyGo - Facility Upgrades Project
Engineer: Parsons Brinckerhoff
(Indianapolis)
Type:
W2
Notes:
INDY16-44005
Type:
rev. 09.21.2015
Project Name:
TRAVERSE (LED)
Traverse Wall Pack
Max Weight: 24.0 lbs
Notes:
design . performance . technology
www.beaconproducts.com
Sample
TRV-D
Ordering
60NB-136
/
A
5K
/
B
T5R
UNV
/
C
/
D
DETAILS
GENIXX
/
E
PEC
/
F
G
A. MODEL
12 1/2”
BBT
/
H
F. CONTROL OPTIONS
TRV-D
Traverse down light
TRV-U
Traverse up light (lens req.) 1
GENI-XX
Energeni 7
G. ELECTRICAL OPTIONS
7 1/4”
Side View
B. ENGINE-WATTS
PEC
photocell, button
24NB-27
27 Watts - LED array
2PF
dual power feed 2,3
24NB-55
55 Watts - LED array
MOB
motion sensor 33% or
50%
36NB-80
80 Watts - LED array
48NB-110
110 Watts - LED array
OCS
occupancy sensor (on/off)
60NB-136
136 Watts - LED array
BPC
cold weather battery
pack 4
dimming 5,6
14”
C. CCT - COLOR TEMP
H. COLOR
3K
3000K
BBT
basic black textured
4K
4000K
BMT
black matte textured
5K
5000K (std.)
WHT
white textured
Front View
D. OPTICS
Top View
metallic bronze textured
BZT
bronze textured
T2
type II
DBT
dark bronze textured
T3
type III
GYS
gray smooth
T4
type IV
DPS
dark platinum smooth
T5R
type V, rectangular
GNT
green textured
2X2
narrow spot flood
MST
metallic silver textured
5X5
medium flood
MTT
metallic titanium textured
E. VOLTAGE
Bottom View
MBT
UNV
120-277V
347
347V
480
480V
OWI
old world iron
RAL
______________
MOB ORDERING INFORMATION: When ordering a fixture with the motion detection option (MOB), please specify the appropriate information. These settings
are specified in the ordering as shown in the example below.
33% or 50% - _____
?? / MT
1 to 30 min. - __________
TRV-D / 48E-63 / AMB / T5SW / 180 / UNV / MOB - __________
High to Dim Delay
1
Low Level
Mounting Height (ft.)
indoor use only
2
not available on 240NB-27
3
not available @ 347V or 480V input
4
36NB-80 only
5
not available on 48NB-110
6
not available on 60NB-136
When ordering Energeni, specify the routine setting code (example GENI-04). See Energeni
brochure and instructions for setting table and options. Not available with sensor options.
7
2041 58th Avenue Circle East Bradenton, fl 34203
Phone: (800) 345-4928
Fax: (941) 751-5535
ORDERING
Submitted by ESL-Spectrum
Job Name:
IndyGo - Facility Upgrades Project
Engineer: Parsons Brinckerhoff
(Indianapolis)
Catalog Number:
TRV/X-48NB/110-5K-T3-UNVPEC-DBT
Type:
W2
Notes:
INDY16-44005
rev. 09.21.2015
TRAVERSE (LED)
Traverse Wall Pack
Max Weight: 24.0 lbs
design . performance . technology
General: The Beacon TRV luminaire is a wall surface mounted luminaire with a field replaceable LED light engine & optical bezel system. Internal components are totally enclosed in
rain-tight and corrosion-resistant die cast aluminum housing. The TRV Luminaire is suitable
for wet locations.
Housing/LED Thermal Management: The Beacon TRV luminaire consists of a die cast
aluminum two-piece housing. The die cast main (thermal) housing provides direct heat exchange between the LED light engine and the cool outdoor air by drawing heat through
integral heat channels and out to the sculptured and functional luminaire surface. LED drivers
are thermally isolated from the main housing, mechanically attached and heat sinked to the
rear housing The main housing is designed with heat dissipating fins for LED thermal management without the use of metallic screens, cages, or fans. The shape of the main housing is
designed to prevent debris accumulation and as a bird nesting deterrent. The back and main
housings are designed to hinge open for easy mounting and easy access.
Mounting & Installation: The rear housing (back plate) is designed with various bolt patterns for direct wall mounting or mounting to a recessed 4” junction box. The rear housing
has three integral 3/4” NPT power feed locations (bottom and each side) for surface mounted
conduit applications. After mounting the rear housing to the wall or junction box, the main
housing is designed to hang and hinge closed after connecting the male and female quick
connectors. The mounting design permits a simple retrofit to existing wall luminaires that
utilize surface mount or recessed junction boxes.
Bezel Optical System: Each Traverse luminaire is supplied with an Optical one piece cartridge system consisting of an LED engine, LED lamps, optics, gasket and stainless steel
bezel. The cartridge is held together with internal brass standoffs soldered to the board so
that it can be field replaced as a one piece Optical system. A two-piece die cut silicone and
polycarbonate foam gasket ensures a weather-proof seal around each individual LED and
allows the Traverse luminaire to be rated for high-pressure hose down applications.
The optical cartridge is secured to the extruded housing with fasteners and a heat pad to
ensure thermal conductivity. The optics are held in place without the use of adhesives and
the complete assembly is gasketed for high pressure hose down cleaning. The cartridge
assembly is available in various lighting distributions using TIR designed Acrylic optical lenses
over each LED.
Printed Circuit Board (PCB): Aluminum thermal clad board with 0.062” thick aluminum
base layer “high temperature” HT-06503 or equivalent (subject to change) dielectric (0.003”
thick, thermal conductivity of 2.2 W/MK, UL RTI of 140°C) 0.0014” thick copper circuit layer
Circuit layer designed with copper pours to minimize thermal impedance across dielectric.
Board shall be supplied with QPAD-3 fiberglass reinforced thermal pad 0.005” thick thermal
conductivity of 2.0 W/Mk. Continuous use temperature of 180°C UL94 V-0. Board will be
mounted to the heat sink using 12 #4-40 screws to ensure contact with thermal pad and heat
sink. Use of thermal grease will not be allowed.
LifeShield™ Circuit: (optional) Thermal circuit shall protect the luminaire from excessive
temperature by interfacing with its 0-10V dimmable drivers to reduce drive current as necessary. The factory-preset temperature limits shall be designed to ensure maximum hours
of operation to assure L70 rated lumen maintenance. The device shall activate at a specific,
factory-preset temperature, and progressively reduce power over a finite temperature range
in recognition of the effect of reduced current on the internal temperature and longevity of the
LEDs and other components.
A luminaire equipped with the device may be reliably operated in any ambient temperature
up to 55ºC (131ºF).
The LifeShield™ thermal regulation circuit will allow higher maximum Wattages than would
be permissible on an unregulated luminaire (if some variation in light output is permissible),
without risk of premature LED failure. Operation shall be smooth and undetectable to the eye.
Thermal circuit shall directly measure the temperature at the LED solder point. LifeShield™
shall consist of surface mounted components mounted on the LED engine (printed circuit
board). For maximum simplicity and reliability, the device shall have no dedicated enclosure,
circuit board, wiring harness, gaskets, or hardware. Device shall have no moving parts, and
shall operate entirely at low voltage (NEC Class 2). The device shall be located in an area of
the luminaire that is protected from the elements.
LifeShield™ shall be designed to “fail on”, allowing the luminaire to revert to full power in the
event of an interruption of its power supply, or faulty wiring connection to the drivers.
Device shall be able to co-exist with other 0-10V control devices (occupancy sensors, external dimmers, etc.). The device will effectively control the solder point temperature as needed;
otherwise it will allow the other control device(s) to function unimpeded.
Motion Activated Luminaires: Beacon TRV luminaires are available with an optional passive infrared (PIR) motion sensor capable of detecting motion within 24 feet of the sensor,
360° around the luminaire, when placed at an 8 foot mounting height. When no motion is
detected for 5 minutes, the Motion Response system reduces the Wattage from 10% to 50%
(factory set at 50% reduction) of the maximum Wattage, reducing the light level accordingly.
When motion is detected by the PIR sensor, the luminaire returns to full Wattage and full
2041 58th Avenue Circle East Bradenton, fl 34203
Phone: (800) 345-4928
light output. Please contact Beacon Products if project requirements vary from standard
configuration.
Electrical: Luminaires are equipped with an LED driver that accepts 100V through 277V,
50 Hz to 60 Hz (UNIV), or a driver that accepts 347V or 480V input. Power factor is .92
at full load. All electrical components are rated at 50,000 hours at full load and 40°C
ambient conditions per MIL-217F Notice 2. Optional 0 to 10 volt dimming drivers are
available upon request. Component-to-component wiring within the luminaire may carry
no more than 80% of rated load and is listed by UL for use at 600VAC at 50°C or higher.
Plug disconnects are listed by UL for use at 600 VAC, 15A or higher. 15A rating applies
to primary (AC) side only.
Surge Protector: The on-board surge protector shall be a UL recognized component
for the United States and Canada and have a surge current rating of 20,000 Amps using
the industry standard 8/20 pSec wave. The LSP shall have a clamping voltage of 825V
and surge rating of 540J. The case shall be a high-temperature, flame resistant plastic
enclosure.
Cold Weather Battery Pack: The emergency driver shall be capable of operating an
LED load of up to 23.1 Watts at rated current (700 mA) for a minimum of 90 minutes. It is
suitable for damp locations as well as sealed and gasketed fixtures. The BPC shall have
37 Watts of input power and a 54.0 Watts-hour battery capacity and shall comply with
emergency standards set forth by the current NEC.
Fasteners: All fasteners shall be stainless steel. When tamper resistant fasteners are
required, spanner HD (snake eye) style shall be provided (special tool required, consult
factory).
Power Supply/Driver Requirements: U.L. UL1310, Class 2 and UL48 compliant
Color Rendering Index (CRI): Luminaire shall have a minimum CRI of 67 at 5000K.
Operating Environment: Shall be able to operate normally in ambient temperatures
from -40°C to 40°C.
Finish: Finish shall be a Beacote V polyester powder-coat electro-statically applied and
thermocured. Beacote V finish shall consist of a five stage iron phosphate chemical
pretreatment regimen with a polymer primer sealer, oven dry off, and top coated with
a thermoset super TGIC polyester powder coat finish. The finish shall meet the AAMA
605.2 performance specification which includes passing a 3000 hour salt spray test for
corrosion resistance and resists cracking or loss of adhesion per ASTM D522 and resists
surface impacts of up to 160 inch-pound.
Agency Certification: The luminaire shall bear a CSA label and be marked suitable for
wet locations.
Warranty: Beacon luminaires feature a 5 year limited warranty. Beacon LED luminaires
with LED arrays feature a 5 year limited warranty covering the LED arrays. LED drivers are
covered by a 5 year limited warranty. PIR sensors carry a 5 year limited warranty from the
sensor manufacturer. See Warranty Information on www.beaconproducts.com complete
details and exclusions.
Power/Lumens & Distribution
Engine
Wattage
Delivered
TM21 Calculated % Lumen
Delivered
Lumens
Maint.
LPW
at 100,000 hrs
(varies by optic)
24NB
27
2752-3014
105-115
96.19%
24NB
55
5138-5500
93-100
96.19%
36NB
80
6935-8215
93-103
94.87%
48NB
110
10240-10950
93-103
92.73%
60NB
136
12800-13700
93-103
85.79%
TM21 is the framework for taking LM-80 data and making useful LED lifetime projections. Reported and Calculated Lifetimes shown are based on hours at the time of
this printing. For current Reported and Calculated hours please contact factory or
Beacon’s web-site.
CCT (COLOR TEMP)
Lumen Output
Multipliers
CRI
(Color Rendering)
5000K = 1.0
min 67 CRI
4000K = .92
min 70 CRI
3000K = .75
min 80 CRI
Due to our continued efforts to improve our products, product specifications are subject to change
without notice.
Fax: (941) 751-5535
SPECIFICATION
Catalog Number:
TRV/X-48NB/110-5K-T3-UNVDBT
Submitted by ESL-Spectrum
Job Name:
IndyGo - Facility Upgrades Project
Engineer: Parsons Brinckerhoff
(Indianapolis)
Type:
W3
Notes:
INDY16-44005
Type:
rev. 09.21.2015
Project Name:
TRAVERSE (LED)
Traverse Wall Pack
Max Weight: 24.0 lbs
Notes:
design . performance . technology
www.beaconproducts.com
Sample
TRV-D
Ordering
60NB-136
/
A
5K
/
B
T5R
UNV
/
C
/
D
DETAILS
GENIXX
/
E
PEC
/
F
G
A. MODEL
12 1/2”
BBT
/
H
F. CONTROL OPTIONS
TRV-D
Traverse down light
TRV-U
Traverse up light (lens req.) 1
GENI-XX
Energeni 7
G. ELECTRICAL OPTIONS
7 1/4”
Side View
B. ENGINE-WATTS
PEC
photocell, button
24NB-27
27 Watts - LED array
2PF
dual power feed 2,3
24NB-55
55 Watts - LED array
MOB
motion sensor 33% or
50%
36NB-80
80 Watts - LED array
48NB-110
110 Watts - LED array
OCS
occupancy sensor (on/off)
60NB-136
136 Watts - LED array
BPC
cold weather battery
pack 4
dimming 5,6
14”
C. CCT - COLOR TEMP
H. COLOR
3K
3000K
BBT
basic black textured
4K
4000K
BMT
black matte textured
5K
5000K (std.)
WHT
white textured
Front View
D. OPTICS
Top View
metallic bronze textured
BZT
bronze textured
T2
type II
DBT
dark bronze textured
T3
type III
GYS
gray smooth
T4
type IV
DPS
dark platinum smooth
T5R
type V, rectangular
GNT
green textured
2X2
narrow spot flood
MST
metallic silver textured
5X5
medium flood
MTT
metallic titanium textured
E. VOLTAGE
Bottom View
MBT
UNV
120-277V
347
347V
480
480V
OWI
old world iron
RAL
______________
MOB ORDERING INFORMATION: When ordering a fixture with the motion detection option (MOB), please specify the appropriate information. These settings
are specified in the ordering as shown in the example below.
33% or 50% - _____
?? / MT
1 to 30 min. - __________
TRV-D / 48E-63 / AMB / T5SW / 180 / UNV / MOB - __________
High to Dim Delay
1
Low Level
Mounting Height (ft.)
indoor use only
2
not available on 240NB-27
3
not available @ 347V or 480V input
4
36NB-80 only
5
not available on 48NB-110
6
not available on 60NB-136
When ordering Energeni, specify the routine setting code (example GENI-04). See Energeni
brochure and instructions for setting table and options. Not available with sensor options.
7
2041 58th Avenue Circle East Bradenton, fl 34203
Phone: (800) 345-4928
Fax: (941) 751-5535
ORDERING
Submitted by ESL-Spectrum
Job Name:
IndyGo - Facility Upgrades Project
Engineer: Parsons Brinckerhoff
(Indianapolis)
Catalog Number:
TRV/X-48NB/110-5K-T3-UNVDBT
Type:
W3
Notes:
INDY16-44005
rev. 09.21.2015
TRAVERSE (LED)
Traverse Wall Pack
Max Weight: 24.0 lbs
design . performance . technology
General: The Beacon TRV luminaire is a wall surface mounted luminaire with a field replaceable LED light engine & optical bezel system. Internal components are totally enclosed in
rain-tight and corrosion-resistant die cast aluminum housing. The TRV Luminaire is suitable
for wet locations.
Housing/LED Thermal Management: The Beacon TRV luminaire consists of a die cast
aluminum two-piece housing. The die cast main (thermal) housing provides direct heat exchange between the LED light engine and the cool outdoor air by drawing heat through
integral heat channels and out to the sculptured and functional luminaire surface. LED drivers
are thermally isolated from the main housing, mechanically attached and heat sinked to the
rear housing The main housing is designed with heat dissipating fins for LED thermal management without the use of metallic screens, cages, or fans. The shape of the main housing is
designed to prevent debris accumulation and as a bird nesting deterrent. The back and main
housings are designed to hinge open for easy mounting and easy access.
Mounting & Installation: The rear housing (back plate) is designed with various bolt patterns for direct wall mounting or mounting to a recessed 4” junction box. The rear housing
has three integral 3/4” NPT power feed locations (bottom and each side) for surface mounted
conduit applications. After mounting the rear housing to the wall or junction box, the main
housing is designed to hang and hinge closed after connecting the male and female quick
connectors. The mounting design permits a simple retrofit to existing wall luminaires that
utilize surface mount or recessed junction boxes.
Bezel Optical System: Each Traverse luminaire is supplied with an Optical one piece cartridge system consisting of an LED engine, LED lamps, optics, gasket and stainless steel
bezel. The cartridge is held together with internal brass standoffs soldered to the board so
that it can be field replaced as a one piece Optical system. A two-piece die cut silicone and
polycarbonate foam gasket ensures a weather-proof seal around each individual LED and
allows the Traverse luminaire to be rated for high-pressure hose down applications.
The optical cartridge is secured to the extruded housing with fasteners and a heat pad to
ensure thermal conductivity. The optics are held in place without the use of adhesives and
the complete assembly is gasketed for high pressure hose down cleaning. The cartridge
assembly is available in various lighting distributions using TIR designed Acrylic optical lenses
over each LED.
Printed Circuit Board (PCB): Aluminum thermal clad board with 0.062” thick aluminum
base layer “high temperature” HT-06503 or equivalent (subject to change) dielectric (0.003”
thick, thermal conductivity of 2.2 W/MK, UL RTI of 140°C) 0.0014” thick copper circuit layer
Circuit layer designed with copper pours to minimize thermal impedance across dielectric.
Board shall be supplied with QPAD-3 fiberglass reinforced thermal pad 0.005” thick thermal
conductivity of 2.0 W/Mk. Continuous use temperature of 180°C UL94 V-0. Board will be
mounted to the heat sink using 12 #4-40 screws to ensure contact with thermal pad and heat
sink. Use of thermal grease will not be allowed.
LifeShield™ Circuit: (optional) Thermal circuit shall protect the luminaire from excessive
temperature by interfacing with its 0-10V dimmable drivers to reduce drive current as necessary. The factory-preset temperature limits shall be designed to ensure maximum hours
of operation to assure L70 rated lumen maintenance. The device shall activate at a specific,
factory-preset temperature, and progressively reduce power over a finite temperature range
in recognition of the effect of reduced current on the internal temperature and longevity of the
LEDs and other components.
A luminaire equipped with the device may be reliably operated in any ambient temperature
up to 55ºC (131ºF).
The LifeShield™ thermal regulation circuit will allow higher maximum Wattages than would
be permissible on an unregulated luminaire (if some variation in light output is permissible),
without risk of premature LED failure. Operation shall be smooth and undetectable to the eye.
Thermal circuit shall directly measure the temperature at the LED solder point. LifeShield™
shall consist of surface mounted components mounted on the LED engine (printed circuit
board). For maximum simplicity and reliability, the device shall have no dedicated enclosure,
circuit board, wiring harness, gaskets, or hardware. Device shall have no moving parts, and
shall operate entirely at low voltage (NEC Class 2). The device shall be located in an area of
the luminaire that is protected from the elements.
LifeShield™ shall be designed to “fail on”, allowing the luminaire to revert to full power in the
event of an interruption of its power supply, or faulty wiring connection to the drivers.
Device shall be able to co-exist with other 0-10V control devices (occupancy sensors, external dimmers, etc.). The device will effectively control the solder point temperature as needed;
otherwise it will allow the other control device(s) to function unimpeded.
Motion Activated Luminaires: Beacon TRV luminaires are available with an optional passive infrared (PIR) motion sensor capable of detecting motion within 24 feet of the sensor,
360° around the luminaire, when placed at an 8 foot mounting height. When no motion is
detected for 5 minutes, the Motion Response system reduces the Wattage from 10% to 50%
(factory set at 50% reduction) of the maximum Wattage, reducing the light level accordingly.
When motion is detected by the PIR sensor, the luminaire returns to full Wattage and full
2041 58th Avenue Circle East Bradenton, fl 34203
Phone: (800) 345-4928
light output. Please contact Beacon Products if project requirements vary from standard
configuration.
Electrical: Luminaires are equipped with an LED driver that accepts 100V through 277V,
50 Hz to 60 Hz (UNIV), or a driver that accepts 347V or 480V input. Power factor is .92
at full load. All electrical components are rated at 50,000 hours at full load and 40°C
ambient conditions per MIL-217F Notice 2. Optional 0 to 10 volt dimming drivers are
available upon request. Component-to-component wiring within the luminaire may carry
no more than 80% of rated load and is listed by UL for use at 600VAC at 50°C or higher.
Plug disconnects are listed by UL for use at 600 VAC, 15A or higher. 15A rating applies
to primary (AC) side only.
Surge Protector: The on-board surge protector shall be a UL recognized component
for the United States and Canada and have a surge current rating of 20,000 Amps using
the industry standard 8/20 pSec wave. The LSP shall have a clamping voltage of 825V
and surge rating of 540J. The case shall be a high-temperature, flame resistant plastic
enclosure.
Cold Weather Battery Pack: The emergency driver shall be capable of operating an
LED load of up to 23.1 Watts at rated current (700 mA) for a minimum of 90 minutes. It is
suitable for damp locations as well as sealed and gasketed fixtures. The BPC shall have
37 Watts of input power and a 54.0 Watts-hour battery capacity and shall comply with
emergency standards set forth by the current NEC.
Fasteners: All fasteners shall be stainless steel. When tamper resistant fasteners are
required, spanner HD (snake eye) style shall be provided (special tool required, consult
factory).
Power Supply/Driver Requirements: U.L. UL1310, Class 2 and UL48 compliant
Color Rendering Index (CRI): Luminaire shall have a minimum CRI of 67 at 5000K.
Operating Environment: Shall be able to operate normally in ambient temperatures
from -40°C to 40°C.
Finish: Finish shall be a Beacote V polyester powder-coat electro-statically applied and
thermocured. Beacote V finish shall consist of a five stage iron phosphate chemical
pretreatment regimen with a polymer primer sealer, oven dry off, and top coated with
a thermoset super TGIC polyester powder coat finish. The finish shall meet the AAMA
605.2 performance specification which includes passing a 3000 hour salt spray test for
corrosion resistance and resists cracking or loss of adhesion per ASTM D522 and resists
surface impacts of up to 160 inch-pound.
Agency Certification: The luminaire shall bear a CSA label and be marked suitable for
wet locations.
Warranty: Beacon luminaires feature a 5 year limited warranty. Beacon LED luminaires
with LED arrays feature a 5 year limited warranty covering the LED arrays. LED drivers are
covered by a 5 year limited warranty. PIR sensors carry a 5 year limited warranty from the
sensor manufacturer. See Warranty Information on www.beaconproducts.com complete
details and exclusions.
Power/Lumens & Distribution
Engine
Wattage
Delivered
TM21 Calculated % Lumen
Delivered
Lumens
Maint.
LPW
at 100,000 hrs
(varies by optic)
24NB
27
2752-3014
105-115
96.19%
24NB
55
5138-5500
93-100
96.19%
36NB
80
6935-8215
93-103
94.87%
48NB
110
10240-10950
93-103
92.73%
60NB
136
12800-13700
93-103
85.79%
TM21 is the framework for taking LM-80 data and making useful LED lifetime projections. Reported and Calculated Lifetimes shown are based on hours at the time of
this printing. For current Reported and Calculated hours please contact factory or
Beacon’s web-site.
CCT (COLOR TEMP)
Lumen Output
Multipliers
CRI
(Color Rendering)
5000K = 1.0
min 67 CRI
4000K = .92
min 70 CRI
3000K = .75
min 80 CRI
Due to our continued efforts to improve our products, product specifications are subject to change
without notice.
Fax: (941) 751-5535
SPECIFICATION