CATALOG # JOB NAME TYPE WATTAGE VOLTAGE Lighting Since 1895 8” LED 3300 • 2400 LUMEN SERIES LRS-08525 55 • 42 WATT Classic “K” Lens Downlight • LED Up to 60,000 Hour Life • Wet Location • Available 55W and 42W LM-80 Qualified • LM-79 Certified Photometry Specifications Delivered System Performance* • Standard WFL distribution: 2852 delivered lumens / 50 LPW / 1.0 SC. • 55 watt LED array. 3500°K standard (or see Options -27K, -30K or -41K). • Up to 85 CRI and 60,000 hour life (L70). For 90+ CRI, see Option -HC. • Option -43: 2400 lumen / 42 watt series package instead. • Fully sustainable: removable for servicing. Thermal Management System • All aluminum proprietary heat sink, components and housing maximize cool operation and long life while minimizing maintenance. LED Power Supply • Suitable for outdoor / indoor use: -30°C (-22°F) to 60°C (140°F). • 120-277V / 50-60Hz standard. Load insensitive. • 0-10V CCR dimming standard. (100-10%) • For Lutron HiLume dimming, see -29 or -39. Thermal Protection: SPECIFY VOLTAGE • Thermal protector for insulation detection per UL/NEC. Must specify input voltage. Trim Assembly • Shock-resisting, UV absorbing prismatic convex widespread frosted Kirlin lens. See Options for others. • Rustfree polished nickel stainless door (304-L) and captive thumb screw. Concealed hinges for fast relamping. • Attractively beveled cast aluminum frame tooled to ensure close fit with door. White acrylic finish. Acrylic Enameled Aluminum Housing • Rustproof and corrosion resistant: Exceeds 1000 hour ASTM 5% salt spray test. • Shallow depth fits restricted plenums. • Cool operation: Extends life of all components. • Fully sustainable: Entire luminaire, including LED light engine, is modular, easily visible and serviced through aperture. • Built-in plaster flange. • Sealed housing design available, see -SH. Outlet Box • UL listed J-box with insulated removable cover. Prewired 14 GA (NEC) with ½” and ¾” knockouts. Installation • Recess indoor or outdoor. • 27” galvanized hanger bars with adjustable mounting brackets (2) supplied. • For residential mounting hardware for wood joist ceilings, see Option -RH. UL, C-UL (Canada) Listings • Wet, damp or dry locations, covered ceilings. • Through-branch conductors (4 #12 AWG 90°C). CE & FCC Compliance • Meets IEC/EN 60601-1-2 electromagnetic compatibility standard for medical electrical equipment. • FCC Part 15 certified for EMI/RFI emissions. FIVE YEAR Limited Warranty • Complete standard fixture. Performance at a Glance Exceptional Energy Efficiency EEE STANDARD (WFL) Lumens:2358 Beam:~51° SC:1.0 LPW:41 Efficiency:58.9% ITL Test: 79885 0 90˚ 75˚ 550 60˚ 1100 1650 0˚ 45˚ 15˚ 30˚ Ceiling Cut-out 9¼” Sq. FY SPECI GE VOLTA 3401 EAST JEFFERSON AVENUE • DETROIT, MICHIGAN 48207-4232 (313) 259-6400 • Fax: (313) 259-9409 OR (313) 259-3121 • www.kirlinlighting.com LED LIGHTING MARCH REV OCT2009 2015 *See note next page LATITUDES LED LIGHTING DUE TO OUR CONTINUING EFFORT TO IMPROVE PRODUCTS, TECHNICAL INFORMATION IS SUBJECT TO CHANGE WITHOUT NOTICE. THE KIRLIN COMPANY EXPECTS PHOTOMETRIC PERFORMANCE TO IMPROVE SIGNIFICANTLY AND FREQUENTLY AS LED SOURCE TECHNOLOGY IMPROVES. CATALOG NUMBER LRS-08525 LRS-08525 8” LED 3300 • 2400 LUMEN SERIES Since 1895 55 • 42 WATT Photometry from I.T.L., Boulder, CO Photometric testing done in accordance with IESNA LM-79-08 STANDARD (WFL) (55W) Lumens:2358 Beam:~51° SC:1.0 EEE LPW:41 Efficiency:58.9% ITL Test: 79885 Cone of Light▲ Dist. 6 8 10 12 14 16 FC 42.5 23.9 15.3 10.6 7.8 6.0 Dia. 5.8 7.7 9.7 11.6 13.5 15.4 Total System Watts 56.9 1CANDLEPOWER DISTRIBUTION 0 90˚ 75˚ 550 60˚ 1100 1650 0˚ 45˚ 15˚ 30˚ 0 5 15 25 35 45 55 65 75 85 90 0.0 1530 1516 1352 1076 767 487 283 154 74 26 11 22.5 1530 1516 1352 1069 750 473 277 151 73 26 13 45.0 1530 1515 1356 1064 735 459 268 148 72 26 13 67.5 1530 1514 1360 1074 750 469 273 149 73 26 13 90.0 1530 1516 1360 1082 768 482 280 153 74 26 11 Option -43(42W) Lumens:1814 Beam:~47° SC:0.9 EEE LPW:41 Efficiency:63.1% ITL Test: 79932 Cone of Light▲ Dist. FC 6 37.5 8 21.1 10 13.5 12 9.4 14 6.9 16 5.3 Dia. 5.2 7.0 8.7 10.4 12.2 13.9 Total System Watts 43.8 1CANDLEPOWER DISTRIBUTION 0 90˚ 75˚ 450 60˚ 900 1350 0˚ 45˚ 15˚ 30˚ 0 5 15 25 35 45 55 65 75 85 90 0.0 22.5 45.0 67.5 90.0 1349 1349 1349 1349 1349 1329 1328 1327 1325 1324 1142 1139 1125 1114 1108 847 837 819 822 831 563 550 531 548 570 344 334 324 339 355 205 200 194 202 210 119 115 114 116 120 60 59 59 59 60 23 23 23 23 24 10 10 11 11 10 LM-80 Qualified • LM-79 Certified Photometry ▲Cone of Light Key manufacturers maintain a tolerance of +7% on flux (lumens) and power (electrical) measurements. Kirlin * LED photometrics are actual test data from Independent Testing Laboratories (ITL) where photometry was measured (Dia. (in ft.) shown is where FC value is half the FC at nadir.) from 4004 lumen (55W) and 2875 lumen (42W) light engines (within the established tolerance). Options OLTAGE SPECIFY V LED Power Supply -120 120V (50-60Hz) input for thermal protector. -277 277V (50-60Hz) input for thermal protector. -29 Two wire full range (100-1%) PWM dimming instead (Lutron). 120V only. Available with Option -43(42W) only. Not available with Option -EI. -39 Three wire full range (100-1%) PWM dimming instead (Lutron). Available with Option -43(42W) only. -43 2400 lumen / 42 watt series package instead. See performance above. Also see -29 or -39. -97 Specify other voltage. Consult factory. -EI Remote emergency inverter for 85% of rated lumens for -43(42W) only. Not available for 55W. Run time: 90+ minutes. 120 or 277V, 60Hz input only. Specify voltage. Not for use with Option -29. Color Temperature (CCT) JOB NAME Lenses and Trims -13 Vandal resistant tempered prismatic spread lens above 1/8” flat polycarbonate. Also see Option -26. -15 Prismatic tempered glass lens instead. -17 .187” prismatic high strength acrylic lens. Also see Option -26. -21 White transluscent flat poly diffuser instead. -23 Frosted microprismatic lens instead. -26 Tamper-resistant button head recessed hex screw with center pin and 1 key / 10 fixtures. Other -99 Special modification. Consult factory. -FS In-line fusing. -RH Residential mounting hardware instead. Suitable for wood joist ceilings with spacing from 141/8” to 257/8” with 5/8” vertical adjustability. -SH Sealed housing and junction box. Note: housing depth increases to 5-5/8”. APPROVAL STAMP ARRA TYPE WATTAGE -32 White oversize trim ring. Specify O.D. -35F Natural aluminum acrylic enameled frame (only). -37F Dark bronze acrylic enameled frame (only). -38F Black acrylic enameled frame (only). -45 Gasket between trim flange and ceiling. -46 Gasket between trim and lens. -94 Custom color/finish. Specify. Consult factory. -27K Color temperature 2700°K instead. -30K Color temperature 3000°K instead. -41K Color temperature 4100°K instead. -HC 90+ CRI instead. 2700° or 3000°K only. Reduces output by ~15%. SUBMITTAL DATA CATALOG NUMBER Ft. Distance from fixture FC Footcandles at nadir (0°) Dia. Circle of light at 50% of FC QUALIFIED VOLTAGE LED LIGHTING LED REV OCT 2015 MARCH 2009 LIMITED WARRANTY: CATALOGED KIRLIN FIXTURES ARE WARRANTIED FREE OF DEFECTS IN WORKMANSHIP OR MATERIAL FOR THREE YEARS FROM DATE OF PURCHASE, INSTALLED TO N.E.C., IN NORMAL USE. Manufacturer at his option will replace or repair such fixture or refund the purchase price on presentation of proof of purchase and defective fixture at the offices of manufacturer within three years of original shipment. Liability of manufacturer is limited to the foregoing, and manufacturer shall not be liable for any other damages, direct or indirect, sustained or suffered by purchaser or any person. This warranty is supplied to the buyer in place of all other warranties, expressed or implied. Seller does not warrant as to merchantability or fitness for a particular use, nor will any oral statement constitute a warranty or amend this specific warranty. Abnormal use, abuse of the fixture, improper installation, or repair, or modification of the fixture without prior written authorization from the manufacturer will render the warranty void. Detailed Photometry - Installed Fixture