PROJECT INFORMATION
MEDMASTER™
Behavioral Healthcare Luminaires
Job Name
Fixture Type
MMPCADE SERIES
Catalog Number
Approved by
PRODUCT FEATURES:
»»Ceiling mount – recessed flange or surface; 2'×2' or 2'×4'
»» Heavy-duty one-piece TIG and spot welded housing
»» Doorframe with Polycarbonate lens secured with Torx®
fasteners for security
SPECIFICATIONS
HOUSING: Die-formed prime grade material as specified – see Ordering Information. TIG and spot welded construction.
DOORFRAME: One-piece die-formed prime grade material as specified – see Ordering Information. Corners continuously seam welded and smooth with no post grinding (TIG).
FINISH: TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%. Optional antimicrobial finish.
LENS: As specified – maximum thickness .375"– see Ordering Information.
LAMP SHIELDING: Exam compartment shielded by frosted linear prismatic high impact acrylic. Ambient compartment shielded by 100% internal fluted high impact acrylic.
GASKET: Closed silicone gasket seals door to housing.
FASTENERS: Torx® head with center pin hardened security screws. Fully recessed.
ELECTRICAL: Fluorescent electronic 120/277V ballasts high power factor (<10% THD). See Ordering Information for optional equipment. Lamps by others. Exam area NEC compliant with isolated
wiring compartment for auxiliary branch circuit feed.
INSTALLATION: FLANGE MOUNT: – Mounting yoke brackets standard. Fixture mounting hardware included. Install Frame Accessory positively locates yoke brackets within ceiling opening; assures
alignment of fixture. No measuring for yoke required; no drywall backing required (included with frame assembly). SURFACE MOUNT: – Four .312" diameter holes.
LISTINGS: UL and CUL Listed for Wet Location. UL certified IP65 per IEC 60598. CCEA approved for flange mount.
CCEA
IP65
Approved
ORDERING INFORMATION (Ex: MMPCADE22-S-1/1-7-2/4-17-IS-120)
Model
Mounting
Door/Housing Material
Lens
Lamp Qty
/
Model
MMPCADE22
MMPCADE24
2'x2'
2'x4'
Mounting Options
SSurface
FFlange
Door/Housing Material
0
14-Ga CRS (Painted White)
1
16-Ga CRS (Painted White)
2
18-Ga CRS (Painted White)
(n/a as Door Material)
3
14-Ga SS (Painted White)
4
16-Ga SS (Painted White)
6
14-Ga SS (Brushed)
7
16-Ga SS (Brushed)
A
18-Ga SS Brushed
(n/a as Door Material)
B
18-Ga SS Painted
(n/a as Door Material)
Lamp Type
Ballast Type
Voltage
Options
Accessory
/
Lens Type
7
.187" Clear Polycarbonate
9
.250" Clear Polycarbonate
B
.375" Clear Polycarbonate
Voltage
120 120 Volts
277 277 Volts
347 347 Volts
Lamp Quantity
Ambient Compartment
1
One Lamp
2
Two Lamps (n/a with Biax Lamps)
Options
AMF Antimicrobial Finish on exposed surfaces
DLN* LED Night Light w/Light Level Control (100% - 20%)
EL* One-Lamp Emergency Battery Pack (32°F)
FS Fuse & Holder
LRL* LED Reading Lights
LVC▲*Low Voltage Controller (See Application Guide
or consult factory for switching options)
MRL▲MR16 Reading Lights (2) (20W watt lamps included)
RF▲ Radio Frequency Filter
TN▲ Night Light – 5/7/9 Watt PL (Lamp supplied by other)
Exam Compartment
2
Two Lamps
4
Four Lamps (n/a with Biax Lamps)
Lamp Type
2x2
17 F17T8
14▲ F14T5
24▲ F24T5HO
40B F40 (n/a with 4 Lamps)
50B F50 (n/a with 4 Lamps)
55B F55 (n/a with 4 Lamps)
Accessory
IF
Install Frame (Flange only)
(Add .375" to each Ceiling Cutout dimension)
na/ with 347V
*Not available on 2x2 when DLN and LRL are specified
▲
2x4
32F32T8
28▲ F28T5
54 F54T5HO
Ballast Type
IS
Instant Start Electronic (T8<10% THD)
RS Rapid Start Electronic (T5,T8 <10% THD)
SB Specified Ballast
www.kenall.com
P: 800-4-Kenall
F: 262-891-9701
10200 55th Street Kenosha, Wisconsin 53144
When you see this image, you will know the Kenall product shown or described is designed and manufactured in the USA with components purchased from US suppliers, and meets the Buy
American requirements under the ARRA. Kenall has not determined the origin of its domestically purchased components or the subcomponents thereof. May be covered by patents found
at www.kenall.com/patents. Content of specification sheets is subject to change; please consult www.kenall.com for current product details. © 2015 Kenall Mfg. Co. All rights reserved.
MMPCADE-101614
For additional photometry, go to www.kenall.com
MEDMASTER™
Behavioral Healthcare Luminaires
MMPCADE SERIES
DIMENSIONAL DATA
HOUSING
SURFACE MOUNT
RECOMMENDED CEILING CUTOUT/MOUNTING HOLES
8.00"(2x2)
30.00"(2x4)
A
6.15"
12.00"(2x2)
12.00"(2x4)
B
FLANGE
DIMENSIONAL DATA (IN INCHES)
A (HOUSING)
18-Ga16-Ga14-Ga
×2 T5-Flange 22.62×2262
2
2×2 T5-Surface 22.55×22.54
2×2 T8-Flange 22.62×24.14
2×2 T8-Surface 22.55×24.06
2×4 T5-Flange 22.62×46.62
2×4 T5-Surface 22.55×46.54
2×4 T8-Flange 22.62×48.14
2×4 T8-Surface 22.55×48.06
22.65×22.65
22.58×22.59
22.65×24.17
22.58×24.11
22.65×46.65
22.58×46.59
22.65×48.17
22.58×48.11
RECOMMENDED CEILING CUTOUT
×2 T5
2
2×4 T5
2×2 T8
2×4 T8
www.kenall.com
22.68×22.68
22.64×22.64
22.68×24.40
22.65×24.16
22.68×46.68
22.65×46.64
22.68×48.20
22.65×48.16
B (FLANGE)
23.75×23.75
N\A
23.75×25.27
N\A
23.75×47.75
N\A
23.75×49.27
N\A
22.93×22.85
22.93×46.85
22.93×24.37
22.93×48.37
P: 800-4-Kenall
F: 262-891-9701
10200 55th Street Kenosha, Wisconsin 53144
When you see this image, you will know the Kenall product shown or described is designed and manufactured in the USA with components purchased from US suppliers, and meets the Buy
American requirements under the ARRA. Kenall has not determined the origin of its domestically purchased components or the subcomponents thereof. May be covered by patents found
at www.kenall.com/patents. Content of specification sheets is subject to change; please consult www.kenall.com for current product details. © 2015 Kenall Mfg. Co. All rights reserved.
MMPCADE-101614