VARIABLE
FREQUENCY DRIVE
｜Pump
｜Metal Processing Machinery
｜Conveyor Belt Machinery
｜Textile Machinery
｜Other Industries
VARIABLE
FREQUENCY DRIVE
RM6E
．Pump
．Metal Processing Machinery
．Conveyor Belt Machinery
．Textile Machinery
．Other Industries
RHYMEBUS CORPORATION
No. 17, Taichung Industrial park 33rd Road,
Taichung City, Taiwan 40768
TEL: +886-4-23595237
FAX: +886-4-23595235
Website: www.rhymebus.com.tw
E-mail: inverter@mail.rhymebus.com.tw
2011.03.31/ XB200078
Copyright
2011 RHYMEBUS. All rights reserved. Specifications subject to change without notice.
www.rhymebus.com.tw
www.rhymebus.com.tw
VARIABLE FREQUENCY DRIVE
GREEN TECH, GREEN LIFE
www.rhymebus.com.tw
FEATURES & THE DESCRIPTION
OF NOMENCLATURE
Suitable for the constant/ variable torque load- mixer, conveyor, fan, pump, etc.
｜Pump｜Metal Processing Machinery ｜Conveyor Belt Machinery
｜Textile Machinery｜Other Industries
The drive can control and start the synchronous motor.
FEATURES & THE DESCRIPTION
OF NOMENCLATURE
02
SPECIFICATIONS
03
GENERAL SPECIFICATIONS
04
TERMINALS DEFINITION
06
Adjustable responding time of the digital input signal.
One set of programmable relays.
Multifunctional special key (SPEC).
External digital keypad (KP-601) for remote control.
Data duplicating and memory functions.
Energy saving option for light duty load.
Temperature and fan control.
RS-485 Modbus RTU with the communication function (optional).
PLC automatic operation, PID control, Build-in DBU.
The description of nomenclature
RM6E
2 001 B 1
Input voltage phase
1: 1PH
3: 3PH
Brake type
B: Build-in braking transistor
Horse Power
Code
Horse Power
0P5
0.5
(HP)
001
1
1P5
1.5
002
2
003
3
005
5
Horse power (please refer to the chart on the right )
VARIABLE FREQUENCY DRIVE
01
Input voltage
1: AC100V~120V
2: AC200V~240V
4: AC380V~480V
Type name
02
VARIABLE FREQUENCY DRIVE
SPECIFICATIONS
GREEN TECH, GREEN LIFE
A. 1ψ100V Series
GENERAL SPECIFICATIONS
A. Control and operational characteristics
Model No.－RM6E
10P5
1001
Maximum Applicable Motor (HP/KW)
0.5/0.4
1/0.75
Rated Output Capacity (KVA)
1.0
1.5
Rated Output Current (A)
2.5
4.0
3ψ, 200-240V
Rated Output Voltage (V)
1ψ, 100-120V, 50/60Hz
Power Source (ψ, V, Hz)
Input Current (A)
10.2
18.9
Permissible Voltage Fluctuation
Natural cooling
Fan cooling
B. 1ψ200V Series
Model No.－RM6E
20P5
2001
2002
2003*
Maximum Applicable Motor (HP/KW)
0.5/0.4
1/0.75
2/1.5
3/2.2
1.1
1.6
2.3
4.0
3
4.2
7.5
10.5
Rated Output Capacity (KVA)
Rated Output Current (A)
Control characteristics
±5%
Cooling Method
Input Current (A)
7.9
12.5
2002
2003*
2005*
Maximum Applicable Motor (HP/KW)
0.5/0.4
1/0.75
2/1.5
3/2.2
5/3.7
1.1
1.6
3
4.2
6.5
3
4.2
8
11
17
3ψ, 200-240V
400.00Hz
3ψ, 200-240V, 50/60Hz
Power Source (ψ,V, Hz)
5.4
6.8
12.8
Permissible Voltage Fluctuation
14
18
176V-264V
Permissible Frequency Fluctuation
±5%
Natural cooling
Fan cooling
Natural cooling
Fan cooling
D. 3ψ400V Series
4001*
4002*
4003*
4005*
1/0.75
2/1.5
3/2.2
5/3.7
Rated Output Capacity (KVA)
1.9
3.0
4.6
6.9
Rated Output Current (A)
2.5
4
6
9
0.015~19200000 sec (Acceleration from 0 to 60Hz, 222 days)
Acc/constant speed stall prevention (Stall prevention current 30~200%) and
Decelerating stall prevention
Slip compensation, automatic torque compensation, automatic constant pressure
overload detection level, DC brake, dynamic brake duty control, PLC control, timer
management, setting duplication
Frequency setting signal
8
12
Fan cooling
Fan cooling
Analog signal: (DC 0-10V/2-10V)/0~100% or (DC 0-20mA/4-20mA)/0~100%
Digital signal: Jog speed, 16-speed control can be selected
RS-485 Modbus communication
Keypad (include KP-601controller)：RUN / STOP
Operation setting signal
Digital signal: FWD/REV control, 3-line sustaining circuit
RS-485 Modbus communication
4sets programmable input terminals: X1-X4
Multi-function inputs
Reaction time (1~255, Unit: 1ms)
Please refer to function settings
1set analog input terminal: AI(0-10V/2-10V or 0-20mA/4-20mA)
Analog inputs
Analog filter (0~255, Unit: 5ms), analog frequency dead zone, variable gain and bias
Please refer to function settings
Multi-function outputs
1set programmable output terminals：Ta/Tc
Please refer to function settings
1set analog output：FM(0-10V/2-10V or 0-20mA/4-20mA)
Analog outputs
variable gain and bias
Please refer to function settings
400.00Hz
Maximum Output Frequency (Hz)
3ψ, 380-480V, 50/60Hz
Power Source (ψ,V, Hz)
3.5
5
Permissible Voltage Fluctuation
332V-528V
Permissible Frequency Fluctuation
±5%
Natural cooling
Fan cooling
*：Under development
03
0 second (coast to stop), 0.0-3200.0 seconds (acc/dec independent setting )
3ψ, 380-480V
Rated Output Voltage (V)
Cooling Method
Stall prevention
Fan cooling
*：Under development
Input Current (A)
Acc. / dec. times
Keypad (include KP-601controller)：▲ ▼
Operational Characteristics
2001
Maximum Applicable Motor (HP/KW)
V/F curve: V independent adjustment (Independent V acc/dec adjustment)
Fan cooling
20P5
Maximum Output Frequency (Hz)
The power of 1.5, 1.7, 2 curve
frequency, upper and lower frequency limits, 16 preset speeds,
Model No.－RM6E
Rated Output Voltage (V)
About 20% (with braking resistor, braking torque can reach about 100%)
acceleration/deceleration switching, S curve acceleration/deceleration, fan control
Fan cooling
Natural cooling
Holding power 0~150% rated current
V/F curve (2 turning points)
V/F curve
±5%
Natural cooling
Start/stop holding time 0~60.0 secs, stop holding frequency 0.1~60Hz
function, PID control, RS-485 Modbus communication, jump frequency, holding
C. 3ψ200V Series
Model No.－RM6E
Braking torque
*
*：Under development
Cooling Method
150% drive rated current for 1 minute
176V-264V
Permissible Frequency Fluctuation
Input Current (A)
0.01Hz
Overload protection
compensation, restart after instantaneous power failure/flying start, speed searching,
18.3
Permissible Voltage Fluctuation
Analog input：0.06Hz/60Hz
Resolution of output frequency
Other functions
1ψ, 200-240V, 50/60Hz
Power Source (ψ,V, Hz)
Keypad：0.01Hz(0.01~99.99Hz/100.0~400.0Hz)
output adjustment, automatic energy saving operation, automatic voltage
400.00Hz
Maximum Output Frequency (Hz)
Rated Output Current (A)
0.1-400.0Hz
3ψ, 200-240V
Rated Output Voltage (V)
Rated Output Capacity (KVA)
Sinusoidal PWM method (V/F control ), switching frequency: 0.8~16kHz
Range of frequency setting
DC brake functions
88V-132V
Permissible Frequency Fluctuation
Control method
Resolution of frequency setting
400.00Hz
Maximum Output Frequency (Hz)
Cooling Method
www.rhymebus.com.tw
VARIABLE
FREQUENCY DRIVE
04
www.rhymebus.com.tw
VARIABLE FREQUENCY DRIVE
GREEN TECH, GREEN LIFE
B. Display, protections, environment
TERMINALS DEFINITION
A. Terminals of main circuit
Terminals
IGBT module error (Fot) - note1, grounding fault protection (GF), drive over-current protection
Power source
overload protection setting (OLO), overload voltage protection (OE), high voltage (Hv), low
Warning/Fault protection
voltage (LE and LE1), drive overheat (OH, Ht), motor overheat (OH1, OH2), PID feedback signal
error (noFb), FWD/REV simultaneous operation (dtF), external fault (EF), output interrupt (bb), free
run (Fr), keypad disconnected during drive setting duplication (PAdF), drive inter-duplication with
different software versions (wrF), keypad disconnected (Err_00、Err_01), RS-485 Modbus
communication overtime (Cot)
Environment
Display
Diagnostics
Main Circuit
Protections
(OC with short circuit protection), motor overload (OL), drive overload (OL1), current limit (OL2),
AD converter failure (AdEr), Drive memory error (EEr1, EEr2),EEPROM error (EEr)
Motor
Power and braking
Symbol
Function Name
R,S,T
Descriptions
Three phase power source
Input AC voltage
(L1,L2,L3)
U,V,W
(T1,T2,T3)
P(+),N(-)
PR
Single phase power source: R,S(L1,L2) terminal
Drive output voltage
Three phase variable frequency and voltage output to motor
Dynamic braking terminal
Connect to the dynamic brake unit
External braking resistor
P and PR terminal connect to an external braking resistor (optional)
Ground the inverter in compliance with the national or local electric
Grounding
Grounding
code
4digits 7-steps display, 8 status indicator LED, 8 keys, 1analog pot
Build-in control panel
8 types of displays: output frequency, setting frequency, output voltage,
DC voltage, output current, 3types of displays (programmable)
External display
IP level
Atmosphere
B. Terminals of control circuit
External connected to KP-601controller
IP20
Terminals
The installation space can not have corrosiveness, conductive gas and liquid. It can not have
Symbol
X1
dust either.
Surrounding temperature
Storage temperature
-10℃~+40℃(no dew and frost)
Relative humidity
Under 90%RH (no dew)
(note 1)
Vibration
Under 5.9m/sec2(0.6G)
X3
Altitude
Altitude 1000 meter (below 3280 feet)
(note 1)
X2
-20℃~+60℃
(note 1)
Input terminals
ψ5
(note 1)
Control Circuit
COM
(note 2)
GND
(Factory setting: FWD command)
Multi-function input
X2 and COM is short-circuit, the function depends on settings.
terminal 2
(Factory setting: REV command)
Multi-function input
X3 and COM is short-circuit, the function depends on settings.
terminal 3
(Factory setting: Jog command)
Multi-function input
X4 and COM is short-circuit, the function depends on settings.
terminal 4
(Factory setting: Reset command)
Common of input terminal
Common of input terminal signals
command)
Analog input terminals
DC 0~10V/2~10V(20KΩ)
Power terminal for control signal
DC+12V input, maximum 20mA.
Grounding terminal for
Grounding terminal (COM and GND use the same terminal )
control signal
The function depends on settings. (Factory setting: output frequency)
(note 3)
Analog output terminals
DC 0~10V/2~10V(Max 1mA)
DC 0~20mA/4~20mA(Max 500Ω)
Output terminals
R 2.5
The function depends on settings.
Ta
5.0
X1 and COM is short-circuit, the function depends on settings.
terminal 1
DC 0~20mA/4~20mA(250Ω)
12V
FM
Overall dimension
(Unit: mm)
Descriptions
Multi-function input
The function depends on settings. (Factory setting: frequency
AI
Power source
158.0
146.0
X4
Name
(Factory setting: error signal detection)
Multi-function terminals
Relay type (Capacity AC250V, 0.2A Max, COSθ=0.3)
Common terminal for Ta
Tc
76.0
76.0
2-M4
88.0
Note 1：SINK/SOURCE choice depends on JP2 (Factory setting: SINK)
Note 2：V/I choice depends on JP1 (Factory setting: V)
Note 3：FMV/FMI choice depends on JP3 (Factory setting: FMV)
C. Communication connector (RJ-45)
146.0
140.1
Terminal Type
RS-485 Modbus
communication
/KP communication
Terminal
Location
Communication transfer port (DX+)
RS-485 Differential inputs (note 1)
2
Communication transfer port (DX-)
RS-485 Modbus communication only uses location 1 and 2
3
KP power port (+16V)
Specific for KP connection
4
KP automatic detection port
Specific for KP connection
Reserved
Reserved
KP power common port (0V)
Specific for KP connection
5
6
8
05
Descriptions
1
7
Note 1：Only 100/200V under 2hp has Fot protection
Terminal Name
Note 1： Terminal resistance 100Ω choice depends on DSW1 (Factory setting: ON)
06