EC
LA
IRA
LED UNDERCABINET
PUCK
T I N G & F AN S
RS
L I GH
G ES & VENT I LAT
EU
1/14
3580LED-PL3WHT-C
3580LED-PL3NKL-C
QUESTIONS OR CONCERNS CONTACT CANARM AT:
1-800-265-1833 (English) / 1-800-567-2513 (French) Monday through Friday 8:00 AM to 5:00 PM E.S.T.
INSTRUCTIONS PERTAINING TO RISK OF FIRE OR INJURY TO PERSONS
READ ALL INSTRUCTIONS
!
IMPORTANT SAFETY
INSTRUCTIONS
SAVE THESE INSTRUCTIONS
TOOLS AND MATERIALS REQUIRED:
Phillips
Screwdriver
Wire Cutters
Wrench
Pliers
SAFETY PRECAUTIONS:
Wiring supplies
as required by
electrical code
This fixture is equipped with a polarized plug (a plug having one blade wider than the other). This
plug will fit in a polarized outlet only one way. This is a safety feature. If you are unable to insert the
plug fully into the outlet, reverse the plug. If it still will not fit, contact a qualified electrician. Never
use with an extension cord unless the plug can be fully inserted.
PACKAGE CONTENTS
PART
A
B
C
D
E
F
G
DESCRIPTION
LED pcuk light
Plug
on/off switch
6' cord
6' extension cord
Wire clips
Screw
QTY
3
1
1
1
1
6
9
INSTALLATION:
OPTION #1 - SURFACE MOUNT
Surface
Can
Housing
OPTION #2 - RECESSED
1. Remove lens cover by
1. Drill a 2 1/8” hole in the
twisting counter-clockwise.
Surface
Can
Housing
Lens Cover
surface with 3 mounting
screws (included).
Replace lens cover.
Notch
Surface
Can
Housing
Secure cord to mounting
surface using wire clips
included.
Reflector
Reflector
Plug cord into power outlet.
link
Mounting
Screws
power cord
Lens Cover
5'
1'
lift cord up from notch
and twist the reflector
counter-clockwise.
Discard housing.
3. Link puck with power cord
puck light
twisting counter-clockwise.
3. To remove the housing cover
Lens cover
10"
2. Remove lens cover by
Lens Cover
2. Attached puck to mounting
Mounting
Screws
underside of the cabinet
2 1/8"
4. Feed cord through drilled
hole and push puck snugly
into place. Secure with
3 mounting screws
(included).
Replace lens cover.
5. Link puck with power cord.
Plug cord into power outlet.
(see step 3 in surface
mount instruction)
Optional hardwire kit (sold separately).
Imported By: CANARM LTD., 2157 Parkedale Ave., Brockville, Ontario, K6V 5V6, Tel: (613) 342-5424, Fax: (800)263-4598
1FT
1
SP T-2
10 "
5F T
SPT-2
SPT-2
2F T
3FT
2
SPT-2
SP T-2
10 "
10 "
SPT-2
10 "
5FT
1F T
1FT
2.5FT
2.5FT
SP T- 2
3
SPT- 2
SPT-2
10"
10"
SPT-2
2FT
3FT
4
SP T-2
SPT-2
10"
10"
SP T-2
3FT
5
SP T-2
SP T-2
SPT-2
10 "
10"
10 "
2FT
3FT
SPT-2
3F T
3F T
6
SPT-2
10 "
SP T-2
10"
2FT
3F T
SPT-2
10 "
SPT-2
10"