Quick-Catalogue
advertisement
Standardparts Quick-Catalogue Ganter is a long-time member of DIN, Deutsches Institut für Normung e. V. Content Ganter – The Company . . . . . . . . . . . . . . . . . . . . . . . Page 1 Standard Parts for Clamping and Operating 1.1 Handles, Knobs . . . . . . . . . . . . . . . . . . . . . . . . . . Page 6 1.2 Cabinet „U“ handles, Tubular handles, Gripping trays . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 7 1.3 Cranked handles . . . . . . . . . . . . . . . . . . . . . . . . . Page 8 1.4 Handwheels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 9 1.5 Adjustable hand levers, Ratchets . . . . . . . . . . . . . Page 10 1.6 Clamping levers, Tension levers . . . . . . . . . . . . . . Page 11 1.7 Star knobs, Wing screws, Knurled screws . . . . . . Page 12 1.8 Indexing mechanisms, Control knobs, Adjustable slide units . . . . . . . . . . . . . . . . . . . . . . Page 13 1.9 Position indicators . . . . . . . . . . . . . . . . . . . . . . . . Page 14 Machine and Fixture elements 2.1 Indexing plungers, Locking pins, Spring plungers Page 15 2.2 Screws and Nuts, Washers, Lifting accessories . . Page 16 2.3 Eccentrical cams, Clamping bolts, Clamping units Page 17 2.4 Toggle clamps, Power clamps, Hook clamps . . . . Page 18 2.5 Levelling feet, Locks, Hinges . . . . . . . . . . . . . . . . . Page 19 2.6 Oil level sight glasses, Level indicators, Plugs . . . Page 20 2.7 Universal joints, Ball joints, Fork joints . . . . . . . . . Page 21 2.8 Tube clamp connectors, Linear actuators . . . . . . . Page 22 2.9 Retaining magnets . . . . . . . . . . . . . . . . . . . . . . . . Page 23 The leading partner for standard machine elements Standard machine elements – for over 100 years Established in 1894 as a mechanical workshop, Ganter presented the first catalogue for standard elements as early as 1912 – five years before the foundation of the Deutsche Industrie Norm (DIN). The idea of standardising industrial products, manufacturing these in economical lot sizes, storing and selling them individually was entirely new at that time. Right to this day, this principle has been underlying our actions which, thanks to high availability and the latest in production engineering, guarantee ultimate benefits for the customer. Leading worldwide Ganter is at the leading edge in the development, production and marketing of standard elements for the entire industry. Quality and the volume of the production selection set standards across all industries. Ganter’s standard machine elements are on offer worldwide through an efficient sales network. Quality, advice and availability are so guaranteed – wherever you are. Service inclusive Ganter’s unique range of standard machine elements has the matching product for virtually every possible application – if not, help is at hand with customised solutions. One thing is certain, though: standard machine elements by Ganter come from a single source and give the best possible support to the design and procurement process. Powerful partners Ganter’s product range has always been strictly driven by needs and requirements of the market. Supplementing this range with strategic alliances and partnerships with other manufacturers has always been part of this philosophy. Elesa Standards, unique plastic elements in design and workmanship, have been part of the Ganter product range for almost 40 years. Today, standard machine elements made by Ganter and Elesa are available in many markets worldwide under the common brand name Elesa+Ganter. Elesa S.p.A., Monza Page 1 Standard elements in real time www.ganter-griff.com All data and new products immediately at hand: Ganter allows the direct access to all important items of information – from any computer and from any place. The Ganter website supports users in selecting the matching elements, regularly delivers updated information and - naturally - allows orders to be placed online. Page 2 Always up to date New standard elements and additions to the range at a glance. Dialogue-based The dialogue-based selection function takes you to the matching product quickly and reliably. All details available Dimensions, material details and other specifi cations are shown – 1 to 1, as in the print catalogue. Input for CAD Download directly to your own computer: the entire range of standard elements is available in all common 2D and 3D formats. Ordering online Order your product easily and conveniently from Ganter’s Webshop. Select your articles in a few easy steps and manage these articles in an individual list of favourites. Past orders are remembered and easily retrieved and can again be put into the shopping basket. www.ganter-griff.com Standardparts DVD Catalogue Also on DVD All data are also available offline with the Ganter DVD – including all data sheets in PDF format and all CAD data. ebe r re 2D- and 3D Drawings Edition 01.2011 Change 15.0.1 Valid for Germany t urh ch tli c h DVD-Catalogue 15.0 h a l t d i e s e r DV D i s 15.0 D e r In ge h zt !K d1 sc üt op ie r en ve r b ot e n! 48 30 1 2 3 4 5 DVD Katalog 2D- und 3D-Zeichnungen Ausgabe 01.2011 Auflage 15.0.1 Gültig für Deutschland s Page 3 Standard elements for special requirements Within the huge range of standard elements for a wide range of different applications and uses, Ganter also supplies products with highly specific properties and characteristics. These are classed in product families and marked with appropriate icons, allowing standard elements to be selected specifically in terms of certain requirements. The stainless steel product family Standard elements made of rust-proof stainless steel grades – designed for use in the food industry, in the chemical industry or, in general, for use in aggressive atmospheres or outdoors. Normally made without galvanic surface treatment, standard elements of the stainless steel product family are not only corrosion-resistant, but also accurately fitting and environmentally friendly. The Ergostyle product family Perfect in ergonomics and design: The Ergostyle product family matches the demands made in terms of aesthetics and ease of operation in modern working environments. The functional design supports the visual differentiation of the final products in the markets and underlines their high quality claim. Ergostyle standard elements have been awarded a number of design prizes; their common mark are three small dots. The Softline product family Standard elements fitted with durable elastomer jackets. Their soft, slipproof surfaces enhance the force transfer between the operator’s hand and the operating element – an unbeatable advantage in a moist, oily, greasy, hot or cold environment. Standard elements of the Softline product family also satisfy ultimate ergonomic demands in every respect. The Cleanline product family This range of standard elements, designed specifically for stringent demands in terms of hygiene, are the first choice in medical engineering. Smooth, white surfaces allow trouble-free and thorough cleaning – and underline the first impression of high standards of hygiene. If used, metal inserts are made of rust-proof stainless steel. Page 4 From an idea to the solution Ganter also develops ultimate technical and economical solutions for specific custom requirements. More information on page 24. The Sanline product family Special additives in the plastic material or in the appropriate coating prevent unwanted organisms such as microbes or bacteria settling and growing on these standard elements. These properties are normally based on admitted silver ions which are absolutely harmless to the user and which keep their effectiveness even after a number of cleaning cycles. The ATEX product family Standard elements developed specially for hydraulics or gear construction, suitable for use in explosion hazard atmospheres. Each standard element of this product family features the appropriate documentation which gives details and information on the underlying European Explosive Atmosphere Directive (ATEX). The ESD product family plastic standard elements, electrically conductive owing to special materials and so counteracting static charges. Designed for use in assembly areas where components sensitive to static electric charges are handled. The letters ESD-C on each element indicate the special antistatic properties under EN 100015/1 and ICE 61340-5-1 Page 5 1.1 Handles, Knobs More products in the internet: Customised solutions: Softline-Ball handles GN 675.1 with tool-extension (hexagon key) Operating handles aluminium with laser-engraving and special „soft-coating“ Tapered knobs GN 518 in special colours with positioning symbol Page 6 GN 798 Revolving handles plastic, aluminium GN 599.5 Revolving cylindrical handles plastic / spindle stainless steel GN 719.2 Domed gear knobs plastic GN 310 Gear lever handles plastic / steel, stainless steel GN 598.1 Revolving handles plastic / spindle stainless steel DIN 98 Revolving handles steel, aluminium, plastic GN 719.2 Domed gear knobs plastic GN 563.2 T-Handles aluminium GN 319.2 Revolving ball knobs plastic GN 203 Fixed conical handles plastic GN 77 Mushroom shaped handles plastic GN 563.1 T-Handles plastic GN 596 Revolving ball knobs plastic DIN 319 Ball knobs steel, aluminium GN 675 Ball handles without cover cap, plastic GN 676 Knurled knob screws plastic GN 597.1 Revolving mushroom shaped handles plastic / steel DIN 319 Ball knobs stainless steel GN 675 Ball handles plastic GN 676.5 Knobs stainless steel Stainless Steel Ergostyle Softline Cleanline Sanline ATEX ESD 1.2 Cabinet „U“ handles, Tubular handles, Gripping trays More products in the internet: Customised solutions: Handles GN 559 with spring-loaded push-button Cabinet „U“ handles asymmetric shaped, of elliptic aluminium profile Tubular handle aluminium multiple bended, plastic coated GN 565 Cabinet „U“ handles aluminium GN 559 Handles aluminium GN 425.2 Folding handles steel GN 666 Tubular handles aluminium / plastic GN 565.5 Cabinet „U“ handles stainless steel GN 628 Cabinet „U“ handles plastic GN 425.4 Folding handle with recessed tray steel / zinc die casting GN 481 Edge handles aluminium / zinc die casting GN 565.2 Angular cabinet „U“ handles aluminium GN 425 Cabinet „U“ handles steel GN 333.1 Tubular handles aluminium / zinc die casting GN 430 Ledge handles aluminium / plastic GN 625 Cabinet „U“ handles plastic GN 425 Cabinet „U“ handles stainless steel GN 333.5 Tubular handles stainless steel GN 630 Ledge handles plastic GN 728 Cabinet „U“ handles aluminium GN 424.5 Arch handles stainless steel GN 767 Cabinet „U“ handles aluminium / plastic GN 733 Gripping trays screw-in type plastic Page 7 1.3 Cranked handles More products in the internet: Customised solutions: Cranked handle GN 369 satinless steel with special drive flange Cranked handle stainless steelcomponents, butt-welded with plastic handle Cranked handle steel welded, plastic coated with springloaded push-off bolt Page 8 GN 570 Cranked handles plastic GN 471 Cranked handles aluminium GN 472.3 Cranked handles with retractable handle aluminium GN 570.1 Cranked handles plastic GN 471.1 Cranked handles zinc die casting GN 369 Cranked handles steel GN 570.2 Cranked handles plastic DIN 468 Cranked handles cast iron GN 510 Cranked handles plastic GN 570.3 Cranked handles with retractable handle plastic DIN 469 Cranked handles cast iron GN 112.1 Control handles zinc die casting GN 670 Cranked handles plastic GN 471.3 Cranked handles with retractable handle aluminium GN 10 Tri-ball handles steel Stainless Steel Ergostyle Softline Cleanline GN 558 Indexing cranked hadles cast iron Sanline ATEX ESD 1.4 Handwheels More products in the internet: Customised solutions: Safetydisc handwheel with customised ball-bearing Coupling attachment, Handwheel DIN 950 all-over plastic coated in special colour One-spoked handwheel technopolymer with customised design elements GN 923 Disc handwheels aluminium GN 522.3 Handwheels with retractable handle plastic GN 000.5 Coupling attachments for safety handwheels GN 520.3 Handwheels with retractable handle plastic GN 924 Spoked handwheels aluminium GN 321 Disc handwheels aluminium GN 321.6 Safety handwheels aluminium DIN 3670 Disc handwheels aluminium GN 521 Disc handwheels plastic GN 322 Spoked handwheels aluminium GN 524.3 Handwheels with retractable handle plastic DIN 950 Handwheels aluminium, cast iron GN 521.3 Handwheels with retractable handle plastic GN 322.3 Handwheels with retractable handle aluminium GN 735 Control handwheels plastic GN 949 Handwheels stainless steel GN 522 Spoked handwheels plastic GN 322.4 GN 322.5 Safety handwheels aluminium GN 736 Control handwheels aluminium GN 227.2 Handwheels stainless steel, pressed Page 9 1.5 Adjustable hand levers, Ratchets More products in the internet: Customised solutions: Adjustable hand lever with individual designed zinc die casting body Hand lever GN 300 with special stainless steel insert Adjustable tension lever customised specifications with aluminium-knob Page 10 GN 300 Adjustable hand levers zinc die casting GN 101 Adjustable hand levers zinc die casting GN 603 Adjustable hand levers with releasing button plastic GN 312 Safety tension levers steel GN 300.1 Adjustable hand levers stainless steelinsert GN 602 Adjustable hand levers zinc die casting GN 603.4 Adjustable hand levers with releasing button plastic, chrome plated GN 125 Flat adjustable tension levers steel GN 300.5 Adjustable hand levers stainless steel GN 602.1 Adjustable hand levers zinc die casting / stainless steel insert GN 500 Adjustable hand levers plastic GN 99.2 Adjustable clamping levers steel GN 300.4 Adjustable hand levers with increased clamping force GN 604 Adjustable hand levers plastic GN 212.3 Adjustable tension levers steel GN 6337.3 Adjustable clamping levers steel GN 302 Adjustable hand levers straight lever, zinc die casting GN 604.1 Adjustable hand levers plastic / stainless steel GN 212.5 Adjustable tension levers stainless steel GN 316 Ratchet clampss steel Stainless Steel Ergostyle Softline Cleanline Sanline ATEX ESD 1.6 Clamping lever, Tension levers More products in the internet: Customised solutions: Split hub with stainless steelshaft and plastic knob Tommy screw with butt welded clamping bolt Tension lever with special hub plastic coated, with polished aluminium knob DIN 99 Clamping levers steel GN 99.7 GN 99.8 Clamp nuts steel, stainless steel DIN 6307 Tommy nuts steel GN 623 Gear levers plastic DIN 99 Clamping levers stainless steel GN 206 Clamp nuts malleable cast iron, stainless steel DIN 6304 Tommy screws steel GN 150 Split hubs Sintered steel GN 204 Short clamping levers steel GN 206.1 Clamp nuts with double lever malleable cast iron, stainless steel GN 212 Tension levers steel, stainless steel GN 223 Control levers steel DIN 6337 Ball levers steel GN 601 Clamping levers plastic GN 512 Gear levers plastic GN 211 Control levers steel GN 99.5 GN 99.6 Clamp nuts steel, stainless steel DIN 6305 Tommy nuts steel GN 750 Control levers steel GN 213 Turret levers steel Page 11 1.7 Star knobs, Wing screws, Knurled screws More products in the internet: Customised solutions: Star knob DIN 6336 aluminium plastic coated, with recess and special bolt Star knob GN 5335 stainless steel with through hole, without hub Star knob GN 5334 with special bolt, welded Page 12 DIN 6336 Star knobs cast iron, aluminium GN 5334 Star knobs with threaded bolt stainless steel GN 633 Wing screws plastic GN 7336 Knurled knobs with threaded stud plastic / steel, stainless steel GN 6336.1 GN 6336.2 Star knobs plastic / steel, stainless steel GN 5335 Star knobs stainless steel GN 834 Wing nuts stainless steel GN 530.1 Knurled nuts plastic / stainless steel GN 5332 Star knobs with extended bush plastic GN 6335.2 Star knobs plastic / stainless steel GN 433 Wing screws stainless steel GN 591 Knurled screws plastic GN 636.4 Star knobs with threaded stud plastic GN 5339.5 Triangular knobs stainless steel GN 431 Wing screws stainless steel DIN 466 Knurled nuts stainless steel GN 5337.3 Safetystar knobs plastic / steel, stainless steel GN 5330.5 Tristar knobs plastic / stainless steel GN 534 Knurled knobs with threaded stud plastic DIN 464 Knurled thumb screws stainless steel Stainless Steel Ergostyle Softline Cleanline Sanline ATEX ESD 1.8 Indexing mechanisms, Control knobs, Adjustable slide units More products in the internet: Customised solutions: Control knob aluminium profile, black anodized with specific laser engraving Control knob steel zinc plated, with black anodized counter piece and special scales GN 711 Rulers plastic, stainless steel GN 526.1 Scale rings for GN 526 GN 729 Control knobs aluminium black anodized GN 200 Indexing mechanisms stainless steel GN 164 Scale rings steel GN 726.2 Control knobs aluminium black anodized GN 624 Softlinecontrol knobs plastic GN 700 Adjustable knob stepless positioning steel / aluminium GN 264 Scale rings steel GN 723.4 Control knobs aluminium, anodized, natural colour GN 727 Control knobs with adjustable spindle aluminium / steel GN 215 Indexing levers steel GN 268 Collar bushes for GN 264 steel GN 723.3 Reference fl anges for GN 723.4 GN 200 Indexing mechanisms steel GN 900 Adjustable slide units aluminium GN 626 Control knobs plastic GN 5338 Setting knobs plastic GN 200 Indexing mechanisms with tension lever steel GN 900.6 Rotary tables stainless steel / aluminium Page 13 1.9 Position indicators More products in the internet: Page 14 GN 000.8 Position indicators pendulum system analog GN 577.8 Handwheels for position indicators pendulum system GN 534.9 Control knobs for position indicators stationary system GN 954 Position indicators digital, 4 digits GN 000.3 Position indicators pendulum system digital / analog GN 521.8 Dischandwheels for position indicators pendulum system GN 577.9 Handwheels for position indicators stationary system GN 954.1 Spacer plate for position indicators GN 954 GN 5348 Control knobs with position indicators pendulum system analog GN 522.8 Handwheels for position indicators pendulum system GN 520.9 Handwheels for position indicators stationary system GN 954.3 Control knob for position indicators GN 954 GN 534.8 Control knobs for position indicators pendulum system GN 323.8 Handwheels for position indicators pendulum system GN 953 Position indicators digital, 5 digits GN 952.1 Adapter bushes for position indicators GN 953 / GN 954 GN 526.8 Control knobs for position indicators pendulum system GN 000.9 Position indicators stationary system analog GN 953.1 Spacer plate for positionindicators GN 953 GN 953.6 GN 954.6 Clamping plates for position indicators GN 953 / GN 954 Stainless Steel Ergostyle Softline Cleanline Sanline ATEX ESD 2.1 Indexing plungers, locking pins, Spring plungers More products in the internet: Customised solutions: Special indexing plungers stainless steel with red plastic knob Cam action indexing plungers GN 612 yellow zinc plated with special thread Pins with axial lock stainless steel customised dimensions and red anodized aluminium knob GN 715 617 PagendruckIndexing stücke plungers zum Einpressen steel / knob plastic GN 822 Mini indexing plungers steel / knob plastic GN 612.1 Mounting blocks for indexing plungers and cam action indexing plungers GN 113.3 Ball lock pins stainless steel 1.4305 GN 617 Indexing plungers stainless steel GN 816 Locking plungers steel GN 612 Cam action indexing plungers stainless steel GN 113.6 Ball lock pins stainless steel GN 617.1 Indexing plungers with rest position stainless steel / knob plastic GN 414 Safety-indexing plungers GN 722.3 Spring latches with flange for surface mounting GN 615.3 Spring plungers with internal hexagon steel, stainless steel GN 717 Indexing plungers steel GN 514 Locking plungers with PUSHPUSH locking mechanism GN 712 Cam action indexing plungers steel GN 614 Spring plungers stainless steel / brass GN 817 Indexing plungers steel / knob plastic GN 7336.8 Clamping indexing plungers plastic, steel GN 113.1 Ball lock pins stainless steel GN 713 Side thrust pins threaded boby Page 15 2.2 Screws and Nuts, Washers, Lifting accessories More products in the internet: Customised solutions: Special eye screw based on DIN 444 Ball jointed levelling feet GN 638 threaded bolt brass Page 16 DIN 444 Eye screws steel, stainless steel GN 350.1 Levelling sets steel / stainless steel GN 172 GN 179 Guide bushes DIN 580 Lifting eye bolts steel / stainless steel GN 913.3 Grub screws with brass pad, plastic pad GN 6333 Quick-action hexagonal nuts GN 771.1 Guide pins GN 581 Lifting eye bolts rotating GN 732 Cylinder head shoulder bolts GN 187.4 Serrated locking plates Sintered steel / Sintered stainless steel GN 346 Ball joint thrust pads GN 586 Load rings rotating DIN 6330 Hexagon nuts with spherical seating steel, stainless steel DIN 787 T-Slot bolts GN 707.2 Split set collars steel, stainless steel GN 351 Rubber buffers GN 184.5 Countersunk washers stainless steel GN 507 T-Nuts for linking aluminium extrusions GN 704 Quick release set collars aluminium DIN 6885 Keys steel / stainless steel Stainless Steel Ergostyle Softline Cleanline Sanline ATEX ESD 2.3 Eccentrical cams, Clamping bolts, Clamping units More products in the internet: Customised solutions: Clamping levers with eccentrical cam GN 927 with extended threaded stud Clamping unit GN 928 „trueround“, combined with an adjustable tension lever GN 212.3 GN 927 Clamping levers with eccentrical cam Lever zinc die casting GN 918.6 Clamping bolts stainless steel GN 919 Hubs with eccentrical cam GN 411.2 Centring bore clamps GN 927 Clamping levers with eccentrical cam Lever zinc die casting GN 918.2 Clamping bolts GN 917 Double cam levers GN 928 Clamping units „trueround“ GN 918 Eccentrical cams GN 918.7 Clamping bolts stainless steel GN 917.1 Double cam levers stainless steel GN 918.5 Eccentrical cams stainless steel GN 418.1 Cam point levers GN 920.1 Wedge clamps GN 918.1 Clamping bolts GN 418 Cam point screws GN 920.2 Pull-down plates for wedge clamps GN 920.1 Page 17 2.4 Toggle clamps, Power clamps, Hook clamps More products in the internet: Customised solutions: Latch clamps GN 852 with safety catch against unauthorised opening Vertical clamps GN 810 with extended lever tubing steel, zinc plated Page 18 GN 810 Vertical clamps GN 851 Latch clamps stainless steel GN 860 Pneumatically operated clamps GN 864 Power clamps GN 910 Vertical clamps heavy duty type GN 851.1 Latch clamps GN 861 Pneumatically operated clamps GN 866 Power clamps GN 820 Horizontal clamps GN 851.2 Latch clamps GN 863 Pneumatically operated clamps GN 821 Hook clamps steel, stainless steel GN 844 Plunger clamps GN 852 Latch clamps heavy duty type GN 708 Clamping bolts steel, stainless steel GN 832 Hook clamps steel, stainless steel GN 843.1 Plunger clamps steel, stainless steel GN 852 Latch clamps heavy duty type stainless steel GN 903 Clamping bolts steel, stainless steel GN 833 Hook clamps steel, stainless steel Stainless Steel Ergostyle Softline Cleanline Sanline ATEX ESD 2.5 Levelling feet, Locks, Hinges More products in the internet: Customised solutions: Levelling feet ø 100 steel, zinc plated combined with a removable grub screw DIN 6332 Levelling feet stainless steel hygienic, customised specifications GN 343.2 Levelling feet steel GN 340 Levelling feet GN 117 Door locks GN 237.2 Hinges to be unhinged zinc die casting GN 343.7 Levelling feet plastic / stainless steel GN 340.1 Levelling feet with fixing lug GN 119 Door locks zinc die casting, stainless steel GN 237 Hinges stainless steel, aluminium, zinc die casting GN 342.1 Levelling feet vibration absorbing steel GN 440.5 Levelling feet stainless steel GN 115 Locks lockable GN 238 Hinges adjustable zinc die casting GN 344.5 Levelling feet plastic / stainless steel GN 341.1 Levelling feet for use in hygiene environment stainless steel GN 115.1 Mini-Locks GN 151.2 Hinges with friction brake plastic GN 248 Levelling feet vibration absorbing GN 992 Threaded tube inserts aluminium GN 315 Snap locks locking distance adjustable GN 239.1 Hinge with safety switch plastic Page 19 2.6 Oil level sight glasses, Level indicators, Plugs More products in the internet: Customised solutions: Level sight glass GN 542 plastic without contrast screen, in special colour Threaded plugs aluminium, based on GN 741 Plugs GN 541.1 plastic special colour with customised dipstick Page 20 GN 743 GN 743.1 Oil level sight glasses aluminium / natural glass GN 744 Prismaticoil level sight glasses aluminium / plastic GN 651 Oil level indicators long version plastic GN 441 GN 442 Threaded plugs aluminium GN 743.2 GN 743.3 Oil level sight glasses brass / natural glass GN 546 Oil level sight glasses plastic GN 740 Threaded plugs with DIN-drain symbol plastic GN 548.1 Plugs plastic GN 743.4 GN 743.5 Oil level sight glasses stainless steel / natural glass GN 650 GN 650.1 Oil level indicators plastic, steel-/stainless steel-screws GN 741 GN 742 Threaded plugs with and without DIN symbols aluminium GN 764 Breather caps steel GN 743.6 ATEXlevel sight glasses aluminium / ESG-glass GN 650.3 Oil level indicators with electrical oil level monitoring plastic GN 738 GN 738.1 Magnetic plugs aluminium GN 774 Breather caps plastic GN 743.7 GN 743.8 Oil level sight glasses with conical thread brass / natural glass GN 652 Oil level indicators with MIN level and MAX temperature electrical sensors GN 749 Threaded plugs steel GN 664.1 Filler strainers Stainless Steel Ergostyle Softline Cleanline Sanline ATEX ESD 2.7 Universal joints, Ball joints, Fork joints, More products in the internet: Customised solutions: Special fork joint Fork joint aluminium anodized with zinc plated tension screw DIN 808 Universal joints with friction bearing GN 908 Universal joints for ordinary applications GN 648.6 Ball joints with threaded stud stainless steel DIN 71802 Angled ball joints GN 808.2 Universal joint shafts with friction bearing GN 808.1 Gaiters for Universal joints GN 751 Fork joints fork heads DIN 71752 DIN 71802 Angled ball joints stainless steel DIN 808 Universal joints with friction bearing stainless steel GN 648.1 Ball joints with female thread GN 751 Fork joints fork heads DIN 71752 stainless steel GN 240 Quick-fi t couplings DIN 808 Universal joints with needle bearing GN 648.2 Ball joints with threaded stud GN 752 Joint pieces steel / stainless steel GN 240.1 Quick-fi t couplings GN 808.3 Universal joint shafts with needle bearing GN 648.5 Ball joints with female thread stainless steel GN 782 Ball joints GN 240.2 Quick-fi t couplings Page 21 2.8 Tube clamp connectors, Clamp mountings, Linear actuators More products in the internet: Customised solutions: Special clamp mounting aluminium profile, plastic coated Linear actuator GN 291 with teflon coating in special colour Page 22 GN 131 Two-way connector clamps aluminium, stainless steel GN 163 Base plate connector clamps aluminium GN 284 Swivel clamp connector joints aluminium GN 132.1 GN 132.2 Linear actuator connectors aluminium GN 132 Two-way connector clamps aluminium GN 193 T-Angle connector clamps aluminium GN 288 Swivel clamp connector joints aluminium GN 145.1 Flanged linear actuator connectors aluminium, stainless steel GN 141 Flanged two-way connector clamps aluminium GN 273 Swivel clamp connectors aluminium GN 990 Construction tubings steel, aluminium, stainless steel GN 923.18 Handwheels for linear actuators Ø18 GN 146 Flanged Connector clamps aluminium GN 276 Swivel clamp connectors aluminium GN 911 Clamping kits zinc die casting stainless steel GN 295 Installation kits for position indicators used on linear actuators GN 147 Flanged connector clamps aluminium GN 282 Swivel clamp connector joints aluminium GN 293 Linear actuators steel, stainless steel GN 299 Longitudinal scales for linear actuators Stainless Steel Ergostyle Softline Cleanline Sanline ATEX ESD 2.9 Retaining magnets More products in the internet: Customised solutions: Retaining magnets with concave magnetic surface for tubings Retaining magnet with special thread Retaining magnet with slots in the housing for safe hold GN 50.1 Retaining magnets without Thread GN 50.45 Retaining magnets with bore stainless steel GN 51.4 Retaining magnets with rubber jacket, with bore GN 52.4 Retaining magnets with stud GN 50.3 Retaining magnets with threaded stud GN 58 Pot mag nets with bore GN 52.1 Retaining magnets smooth finish GN 60 Button-type magnets with bore GN 50.2 Retaining magnets with threaded bush GN 51.2 Retaining magnets with rubber jacket, threaded bush GN 54.1 Retaining magnets smooth finish brass GN 62 U-Magnets with bore GN 50.25 Retaining magnetes with thread bush stainless steel GN 51.5 Retaining magnets with rubber jacket, internal thread GN 52.2 Retaining magnets with internal thread GN 50.4 Retaining magnets with bore steel GN 51.3 Retaining magnets with rubber jacket, threaded stud GN 52.3 Retaining magnets with intenal thread Page 23 Beyond standards Customised solutions are part of Ganter’s core competence. In spite of the enormous variety of standardised elements, there are often highly specific requirements in terms of dimensions, materials or functionality. Working closely with the customer, Ganter then develops individual solutions. New or adapted Depending on requirement profile, customised elements are made by costeffectively adapting an existing Ganter standard element – or by means of an entirely new design. Also in small unit quantities A unique variety of different production methods and an adaptable, customer driven organisation allow standard elements to be adapted and customised even in relatively small unit quantities. All-round service Ganter not only develops and manufactures customised standard elements. If required, Ganter also manages their on-call inventories, guaranteeing economical lot or batch sizes, favourable prices and a high level of supply availability. Page 24 www.ganter-griff.com Otto Ganter GmbH & Co. KG Normteilefabrik Triberger Straße 3 78120 Furtwangen Germany Issue 03/2011 - Valid for Germany Phone +49 7723 6507-0 Fax +49 7723 4659 E-Mail info@ganter-griff.com
