HALO
®
HALO LED H7 Se r i e s
H750TEM912 is a dedicated LED housing designed to provide Emergency Battery backup when used with dedicated Halo Emergency LED Modules: 900 Series ML7098xxT120DEM and 1200
Series ML7128xxTUNVD010EM. Housing includes an LED Emergency
Battery Backup Driver with Remote Test Switch, and is prewired with
the additional 0-10V dimmer connection for dimming 1200 Series
modules. H750TEM912 is listed for 15W maximum, 120V with 900
Series LED modules and 25W maximum, 120V/277V with 1200 Series
modules. Emergency rated housing is for use in Non-Insulated ceilings only. Halo offers high quality downlighting along with the
high efficacy of LED – the result is great lighting and significant energy savings.
Catalog #
Type
Project
Comments
Date
Prepared by
DESIGN FEATUR E S
Housings
• Aluminum with white semi-gloss
paint finish.
Plaster Frame
• Galvanized steel frame. Housing
adjusts in plaster frame to
accommodate up to 1” ceiling
thickness.
• Regressed locking screw for securing hanger bars.
• Cutouts included for easily
crimping hanger bars in position.
-
Accommodates the following standard non-metallic sheathed cable sizes:
(US) #14/2, #14/3, #12/2, #12/3
(Canada) #14/2, #14/3, #12/2
LED Module Connections in housing
The H750TEM912 has three pre-wired connectors for connection
with 900 Series and 1200 Series LED Modules for power, emergency back-up, and dimming (1200 Series
only).
• Power: 900 Series 120V, and GOT NAIL! Pass -N-Thru™ 1200 Series 120V/277V Halo LED Bar Hangers
modules feature a plug-in line • Pre-installed nail easily installs voltage wiring connector (UL and in regular lumber, engineered CSA Listed Luminaire Disconnect). lumber and laminated beams.
This non-screw-base connection
• Safety and guidance system preserves the high efficacy rating prevents snagging, ensures and prevents use of low efficacy
smooth straight nail penetration incandescent sources.
and allows bar hangers to be easily • Dimming:
removed if necessary.
900 Series: ML7098xxT120DEM
• Automatic leveling flange aligns The luminaire power disconnect the housing and lets you hold the is connection for 900 Series LED housing in place with one hand Modules, for use with standard while driving nails.
120V phase-control dimmers.
• Housing can be positioned at any 1200 Series: point within 24” joist span.
ML7128xxTUNVD010EM
• Pass-N-Thru™ feature allows bar The module is pre-wired with two
hangers to be shortened without low voltage DC control wires removing from plaster frame.
color code violet and gray for
• Score lines allow “tool-less” 0-10V DC low voltage dimming shortening for 12” joists.
with mating connector in the
• Bar hangers may be repositioned H750TEM912 housing for
90°.
connection to 0-10V diming
controls.
• Integral T-bar clip snaps onto T-bars - no additional clips • Emergency Backup:
required.
- The ML7098xxT120DEM and
Slide-N-Side™ Junction Box
• Positioned to accommodate straight conduit runs
• Seven 1/2” trade size conduit knockouts with true pry-out slots
• Slide-N-Side™ wire traps allow non-metallic sheathed cable to be
installed without tools and without removing knockouts.
• Accepts a wide range of non-metallic (type NM) sheathed cables - the standard cable types used in lighting in both U.S. and Canada.
- Allows wiring connections to be made outside the junction box
- Simply insert the cable directly into the trap after connections are made.
www.cooperlighting.com
2) Emergency back-up:
un-switched power circuit to the
battery back-up driver.
A qualified electrician must ensure
appropriate installation per applicable national and local codes.
For 900 Series Emergency LED
Modules ML7098xxT120DEM Normal Power: 120V
Emergency back-up power: 120V
For 1200 Series Emergency LED
Modules ML7128xxTUNVD010EM
Normal Power: 120V-277V input
Emergency back-up power: (Dual)
120/277 VAC
Warranty
Cooper Lighting provides a three
year limited warranty on Halo LED
Luminaires which includes the LED Recessed Housing, LED Light
Engine, and LED trims.
Compliance
Labels
• UL/cUL 1598 Listed Luminaire (Emergency listed U.S. only)
• UL/cUL Listed for Feed Through
• UL/cUL Listed for Damp Location
• UL/cUL Listed for Wet Location
with select trims
• Rated 15W, 120V with
ML7098xxT120DEM LED modules
• Rated for 25W, 120V/277V with ML7128xxTUNVD010EM LED modules
Qualification
Can be used to meet High Efficacy
luminaire requirements (when used
with compliant Halo LED modules
and designated trims):
ML7128xxTUNVD010EM
• State of California Title 24
emergency LED modules are • International Energy Conservation pre-wired with a plug-in wiring connector for emergency back-up Code (IECC)
connection to a mating connector AIR-TITE Compliant
in the H750TEM912 emergency
• Washington State Energy Code
housing.
• New York State Energy Electrical Connections into housing
Conservation Construction Emergency housing requires two
Code (NY-ECCC)
power inputs.
• Certified under ASTM-E283
1) Normal power to the LED
Module for occupant switching
or dimming (900 Series uses
normal power input from a
120V dimmer for dimming function, 1200 Series uses two low voltage control wires for
120V/277V dimming in addition to normal power to switch on/
off).
H750TEM912
6” New Construction
Emergency Backup
Non-IC Housing
For Halo 900 Series and
1200 Series
Emergency LED Modules
ML7098xxT120DEM
ML7128xxTUNVD010EM
and
49x Halo LED Series
Trims
FOR USE IN
N O N - I N S U L AT E D
CEILINGS
High Efficacy LED
Housing
Emergency Battery Backup
Energy Data
Operating Temp: 0°C to 55°C
Input Voltage: (Dual) 120/277 VAC*
Input Frequency: 60Hz
Input Power: 2.0W
Emergency Operation: 90 min.
*120V only with ML7098xxT120DEM LED
modules.
H750TEM912
Housing Data
When used with ML7098xxT120DEM LED
modules.
Rated Wattage: 15W, 120V
When used with ML7128xxTUNVD010EM
LED modules.
Rated Wattage: 25W, 120V/277V
When used with compliant
Halo LED Modules and Trims
ADV110423
rev 7/28/11
H750TEM912
DIMENSIONS
7 inch (178 mm)
outer dimension
7-3/8 inch
(187 mm)
1/2 inch
(13 mm)
6-1/2 inch
(165 mm) outer dimension
14-1/2 inch
(370 mm)
PHOTOMETRY - EMERGENCY MODE, BATTERY POWER
For photometry under normal power load, refer to ML7098xxICAT120D and ML7128xxTUNVD010 photometric files online at
www.cooperlighting.com.
FOR Hallway Example -
9’-0” Ceiling - 6’-0” Width - 80/50/20 Reflectance
g
cin
spa
900 Series LED
g
cin
spa
Test No. SP20049
3000°K LED Emergency Module
494SC06
Open Reflector, Specular Clear
H750TEM912
6" Halo LED Emergency Housing - 900/1200 Series
ILB2412
Iota EM Battery (Integal to housing)
Hallway
9´-0˝
6'-0"
8'-0"
10'-0"
Average
8.62
6.48
5.34
Maximum
9.9
7.5
6
Minimum
4.0
3.4
3.3
Avg/Min
2.16
1.91
1.62
Max/Min
2.48
2.21
1.82
Halo
LED
Downlights
Emergency
Backup
Fixture Spacing O.C.
Floor Illuminance (fc)
g
cin
spa
ML709830T120DEM
6´-0˝
Total Delivered Lumens: 591
1200 Series LED
Test No. SP20050
ML712830TUNVD010EM
3000°K LED Emergency Module
494SC06
Open Reflector, Specular Clear
H750TEM912
6" Halo LED Emergency Housing - 900/1200 Series
ILB2412
Iota EM Battery (Integal to housing)
Fixture Spacing O.C.
Floor Illuminance (fc)
6'-0"
8'-0"
10'-0"
Average
8.62
6.48
5.34
Maximum
9.9
7.5
6
Minimum
4.0
3.4
3.3
Color Temperature as tested: 3000°K
Avg/Min
2.16
1.91
1.62
Color Temperature
2700°K
3000°K
3500°K
4000°K
Max/Min
2.48
2.21
1.82
Multiplier
0.9302
1.00
1.093
1.0977
Total Delivered Lumens: 591
Note: 1. This application example is provided to represent typical fixture performance. Field results may vary.
2. For typical lumen values with other color temperatures use the applicable multiplier.
H750TEM912
ORDERING INFORMATION
SAMPLE NUMBER:
Complete unit includes H750TEM912 housing, Halo LED 900 Series Emergency Module ML7098xxT120DEM or 1200 Series Emergency Module
M L 7 1 2 8 x x T U N V D 0 1 0 E M , a n d H a l o L E D 4 9 x s e r i e s t r i m - o r d e r e d s e p a r a t e l y ( r e f e r t o 9 0 0 S e r i e s a n d 1 2 0 0 S e r i e s E m e r g e n c y M o d u l e s p e c i fi c a t i o n s
for further information).
Emergency Backup Housing
H750
H750= LED Housing with LED
connections (high efficacy
compliant)
TEM912
TEM912= 6˝ Dedicated LED Non-IC listed, AIR-TITE, New Construction Housing for Halo LED
900 Series 120V, and 1200 Series 120V/277V Emergency Modules, with prewired connections
for LED power, 1200 Series 0-10V Dimming, and Emergency Backup from emergency driver.
ML7 LED 900 Series Modules
ML7098xxT120DEM
ML709
ML709= LED Module, 900 Series
8
8= 80 CRI
Nominal CCT
27= 2700°K
30= 3000°K
35= 3500°K
40= 4000°K
T120D
EM
T120D=Non-IC Listed,
120V for
standard 120V
dimming
EM=Emergency Connection
for mating connection
with the H750TEM912
emergency housing
ML7 LED 1200 Series Modules
ML7128xxT120DEM
ML712
ML712= LED Module, 1200 Series
8
8= 80 CRI
Nominal CCT
27= 2700°K
30= 3000°K
35= 3500°K
40= 4000°K
TUNVD010
EM
TUNVD010=Non-IC
Listed 120V-277V
UNV Module with
0-10V DC dimming
EM=Emergency Connection
for mating connection
with the H750TEM912
emergency housing
H7 LED Downlight Trims
H7 LED Trims Accessories
White Reflector and white trim ring
White Baffle and white trim ring
Haze Reflector and white trim ring
Specular Clear Reflector and white trim ring
Frost Lens, white baffle and trim ring, Shower rated
Solite® Regressed Lens, upper specular reflector, White baffle and trim ring with
anti-microbial paint (standard), Shower rated
493SCS06 Solite® Regressed Lens, upper specular reflector, Specular Clear reflector and white
trim ring, Shower rated
493HS06
Solite® Regressed Lens, upper specular reflector, Haze reflector, and white trim ring,
Shower rated
493SNS06 Solite® regressed Lens, upper specular reflector, Satin Nickel reflector and trim ring, Shower rated
493TBZS06 Solite® Regressed Lens, upper specular reflector, Tuscan Bronze reflector and trim ring,
Shower rated
493BBS06 Solite® Regressed Lens, Black baffle with white trim ring, Shower rated
493PS06
Solite® Regressed Lens, upper specular reflector, White reflector and trim ring with anti-microbial
paint, Shower rated
495WW06 Wall wash with semi-specular clear reflector, specular kick reflector and lens, white trim ring
495PWW06 Wall wash with white reflector, specular kick reflector and lens, white trim ring
491WBS06 Polymer Lensed Trim, White Baffle & Ring Non-electrically conductive (plastic) front, Shower rated
494P06
494WB06
494H06
494SC06
492PS06
493WBS06
494OPTIC 6" Over-Optic Diffuse Lens for use with Open LED Trims
(494 family), Shower rated.
Oversize Trim Ring
OT490WH 6" Oversize white die-cast trim ring 9-1/4" O.D. Attaches
to LED module, substitute for standard trim ring shipped
with trims.
OT403P
Oversize White Plastic Ring, 6" I.D. x 8" O.D.Ring slips
behind standard LED trim ring.
OT400P
Oversize White Metal Ring, 6" I.D. x 9-1/4" O.D.Ring slips
behind standard LED trim ring.
Designer Trim Rings, Thin Profile
TRM490WH White die-cast trim ring
TRM490SN Satin Nickel die-cast trim ring
TRM490TBZ Tuscan Bronze die-cast trim ring
TRM490BK Black die-cast trim ring
TRM490PC Polished Chrome die-cast trim ring
Solite® is a registered trademark of AGC Flat Glass North America
www.cooperlighting.com
Note: Specifications and Dimensions subject to change without notice.
Visit our web site at www.cooperlighting.com
Customer First Center 1121 Highway 74 South Peachtree City, GA 30269 770.486.4800 FAX 770 486.4801
Cooper Lighting 5925 McLaughlin Rd. Mississauga, Ontario, Canada L5R 1B8 905.507.4000 FAX 905.568.7049