WIRING DEVICES

advertisement
Project Number
Project Date
Project Name
SECTION 26 2726
WIRING DEVICES
PART 5 - GENERAL
5.1.1.1 SUMMARY
1.1.1.A. Includes But Not Limited To:
1.1.1.A.1.
Furnish and install wiring devices complete with plates as described in Contract
Documents.
1.1.1.B. Related Requirements:
1.1.1.B.1. Section 26 0501: Common Electrical Requirements.
EDIT REQUIRED: Include following TWO paragraphs for Heritage 09T and Phased
Meetinghouse Standard Plans.
For other Meetinghouse Standard Plans, include following TWO paragraphs if Section 27
1501 ‘Communications Horizontal Cabling’ IS included in Project.
1.1.1.B.2. Section 27 1116: ‘Communications Cabinets, Racks, Frames, and
Enclosures’.
1.1.1.B.3. Section 27 1501: Cables for Telephone and Data Systems.
PART 6 - PRODUCTS
6.1.1.1 COMPONENTS
1.1.1.A. Manufacturers:
1.1.1.A.1.
Manufacturer Contact List:
Wiring Devices
-1-
26 2726
Project Number
1.1.1.A.2.
Project Date
Project Name
1.1.1.A.1.a. Cooper Wiring Devices, Peachtree City, GA
www.cooperwiringdevices.com.
1.1.1.A.1.b. General Electric Industrial Systems, Charlotte, NC
www.geindustrial.com.
1.1.1.A.1.c. Hubbell Building Automation, Austin, TX www.hubbellautomation.com.
1.1.1.A.1.d. Hubbell Inc, Milford, CT www.hubbell-wiring.com or Hubbell
Canada Inc, Pickering, ON (800) 263-4622 or (905) 839-4332.
1.1.1.A.1.e. Hunt Control Systems Inc, Fort Collins, CO
www.huntdimming.com.
1.1.1.A.1.f. Intermatic Inc, Spring Grove, IL www.intermatic.com.
1.1.1.A.1.g. Leviton Manufacturing Co, Little Neck, NY www.leviton.com or
Leviton Manufacturing of Canada Ltd, Pointe-Claire, QB (800) 461-2002 or
(514) 954-1840.
1.1.1.A.1.h. Lightolier Controls, Dallas, TX www.lolcontrols.com or Lightolier
CFI, Lachine, QB (800) 565-5486 or (514) 636-0670.
1.1.1.A.1.i. Lutron Electronics Co Inc, Coopersburg, PA www.lutron.com.
1.1.1.A.1.j. Novitas Inc, Peachtree City, GA www.novitas.com.
1.1.1.A.1.k. Ortronics, New London, CT www.ortronics.com.
1.1.1.A.1.l. Paragon Electric Co Inc, Carol Stream, IL
www.icca.invensys.com/paragon or Paragon Electric, Mississauga, ON
(800) 951-5526 or (905) 890-5956.
1.1.1.A.1.m. Pass & Seymour, Syracuse, NY www.passandseymour.com or
Pass & Seymour Canada Inc, Concord, ON (905) 738-9195.
1.1.1.A.1.n. Red Dot div of Thomas & Betts, Memphis, TN www.tnbcom.
1.1.1.A.1.o. Siemon Company, Watertown, CT www.siemon.com.
1.1.1.A.1.p. Square D Co, Palatine, IL www.squared.com.
1.1.1.A.1.q. Suttle, Hector, MN www.suttleonline.com.
1.1.1.A.1.r. Tork Inc, Mount Vernon, NY www.tork.com.
1.1.1.A.1.s. Watt Stopper Inc, Santa Clara, CA www.wattstopper.com.
Product Options:
1.1.1.A.2.a. Faces shall be nylon where available.
1.1.1.A.2.b. Devices of single type shall be from same Manufacturer.
EDIT REQUIRED: Edit following paragraph if other or more specific color requirements are
necessary.
1.1.1.A.2.c. Devices are listed as white. Use white devices on light colored
walls and brown on dark walls.
1.1.1.B. Switches:
1.1.1.B.1.
Rectangular Face Designer Style:
EDIT REQUIRED: Delete items included under following paragraph that are not used on this
Project.
1.1.1.B.1.a. Category Four Approved Products. See Section 01 6200 for
definitions of Categories:
1.1.1.B.1.a.1) 20 AMP, single pole:
1.1.1.B.1.a.1.a)Cooper: DECB120W.
1.1.1.B.1.a.1.b)Hubbell: HBL2121WA.
1.1.1.B.1.a.1.c) Leviton: 5621-2W.
Wiring Devices
-2-
26 2726
Project Number
Project Date
Project Name
1.1.1.B.1.a.1.d)Pass & Seymour: 2621-W.
1.1.1.B.1.a.2) Two Pole:
1.1.1.B.1.a.2.a)Cooper: DECB220W.
1.1.1.B.1.a.2.b)Hubbell: HBL2122WA.
1.1.1.B.1.a.2.c) Leviton: 5622-2W.
1.1.1.B.1.a.2.d)Pass & Seymour: 2622-W.
1.1.1.B.1.a.3) Three Way:
1.1.1.B.1.a.3.a)Cooper: DECB320W.
1.1.1.B.1.a.3.b)Hubbell: HBL2123WA.
1.1.1.B.1.a.3.c) Leviton: 5623-2W.
1.1.1.B.1.a.3.d)Pass & Seymour: 2623-W.
1.1.1.B.1.a.4) Four Way:
1.1.1.B.1.a.4.a)Cooper: DECB420W.
1.1.1.B.1.a.4.b)Hubbell: HBL2124WA.
1.1.1.B.1.a.4.c) Leviton: 5624-2W.
1.1.1.B.1.a.4.d)Pass & Seymour: 2624-W.
1.1.1.B.1.a.5) Pilot Switch:
1.1.1.B.1.a.5.a)Single Pole:
(1) Cooper: 2221PL.
(2) Hubbell: HBL1221PL.
(3) Pass & Seymour: PS20AC1-RPL.
(4) Leviton: 1221-PLR.
EDIT REQUIRED: Include following paragraph when a satellite system is included on
Project.
1.1.1.B.1.a.5.b)Double Pole:
(1) Cooper: 2222PL.
(2) Hubbell: HBL1222PL.
(3) Pass & Seymour: PS20AC2-RPL.
(4) Leviton: 1222-PL.
1.1.1.B.1.a.6) Lighted Toggle Switch:
1.1.1.B.1.a.6.a)Single Pole:
(1) Cooper: DECB120LW.
(2) Hubbell: HBL2121ILWA.
(3) Leviton: 5631-2W.
(4) Pass & Seymour: 2625-W.
1.1.1.B.1.a.6.b)Three Way:
(1) Cooper: DECB320LW.
(2) Hubbell: HBL2123IWA.
(3) Leviton: 5633-2W.
(4) Pass & Seymour: 26266-W.
EDIT REQUIRED: Include following paragraph when Designer Style devices are selected
and furnaces are not provided with internal overload devices in Section 26 2816 ENCLOSED
SWITCHES AND CIRCUIT BREAKERS:
1.1.1.B.2.
Standard Style:
1.1.1.B.2.a. Category Four Approved Products. See Section 01 6200 for
definitions of Categories:
1.1.1.B.2.a.1) 20 AMP, single pole for furnace disconnect:
Wiring Devices
-3-
26 2726
Project Number
Project Date
Project Name
1.1.1.B.2.a.1.a)Cooper: 2221V.
1.1.1.B.2.a.1.b)Hubbell: HBL1221-I.
1.1.1.B.2.a.1.c) Pass & Seymour: 20AC1-I.
1.1.1.B.2.a.1.d)Leviton: 1221-2I.
EDIT REQUIRED: Edit following paragraph to fit Project circumstances.
1.1.1.B.3.
Exhaust Fan Timer Switches:
1.1.1.B.3.a. Serving Area:
1.1.1.B.3.a.1) 0-60 minute, no hold position.
1.1.1.B.3.a.2) Approved Products:
1.1.1.B.3.a.2.a)Intermatic: FD60MWC.
1.1.1.B.3.a.2.b)Paragon: SWPD60M-W.
1.1.1.B.3.a.2.c) Tork: A560MW.
EDIT REQUIRED: Include following paragraph when a Font is included on Project.
1.1.1.B.3.b. Font:
1.1.1.B.3.b.1) 0-4 Hour, no hold position.
1.1.1.B.3.b.2) Approved Products:
1.1.1.B.3.b.2.a)Intermatic: FDHW.
1.1.1.B.3.b.2.b)Tork: A504HW.
1.1.1.B.3.c. Custodian Room:
1.1.1.B.3.c.1) 24 hour, in-wall, multiple automatic ON-OFF settings.
1.1.1.B.3.c.2) Category Four Approved Products. See Section 01 6200 for
definitions of Categories:
1.1.1.B.3.c.2.a) Intermatic: E1020.
1.1.1.B.3.c.2.b) Tork: 701A.
1.1.1.B.4.
Digital Time/Timer Switch:
1.1.1.B.4.a. As shown in small Storage, Mechanical and Electrical Rooms.
1.1.1.B.4.b. Automatic countdown type:
1.1.1.B.4.b.1) Category Four Approved Products. See Section 01 6200 for
definitions of Categories:
1.1.1.B.4.b.1.a)Leviton: LTT60-1L.
1.1.1.B.4.b.1.b)Hubbell: TD200.
1.1.1.B.4.b.1.c) Pass & Seymour: RT1W.
1.1.1.B.4.b.1.d)Tork: SSA100.
1.1.1.B.4.b.1.e)Watt Stopper: TS-400-W.
EDIT REQUIRED: Dimmer switches below are authorized only for Cultural Center / Hall in
conjunction with incandescent lighting, or for Stake Center Chapels for low level
incandescent lighting during satellite broadcasts. They are not authorized for Meetinghouse
Chapels, Relief Society Rooms, Classrooms, Genealogical Centers, etc., or for use on
fluorescent lighting.
1.1.1.B.5.
Dimmer Switches:
1.1.1.B.5.a. Vertical slide control with faceplate.
1.1.1.B.5.b. Preset, ON-OFF switch, 1000VA.
1.1.1.B.5.c. Approved Products:
1.1.1.B.5.c.1) Hubbell: AS101/AS1I.
1.1.1.B.5.c.2) Hunt: DAP-10-IV.
1.1.1.B.5.c.3) Leviton: IPI10-I.
Wiring Devices
-4-
26 2726
Project Number
Project Date
1.1.1.B.5.c.4)
1.1.1.B.5.c.5)
1.1.1.B.5.c.6)
Project Name
Lightolier: MP1000-I.
Lutron: N-1003P-IV.
Pass & Seymour: 91180-I.
1.1.1.C. Receptacles:
1.1.1.C.1.
Rectangular Face Designer Style:
1.1.1.C.1.a. 15 AMP, specification grade, back and side wired, self grounding.
1.1.1.C.1.b. Category Four Approved Products. See Section 01 6200 for
definitions of Categories:
1.1.1.C.1.b.1) Cooper: 6262W.
1.1.1.C.1.b.2) Hubbell: HBL2152WA.
1.1.1.C.1.b.3) Leviton: 16252-W.
1.1.1.C.1.b.4) Pass & Seymour: 26252-W.
EDIT REQUIRED: Delete following paragraph if ranges not included in Project.
1.1.1.C.2.
Range Receptacle:
1.1.1.C.2.a. Three pole, four wire grounding, 125 / 250 V, NEMA 14-50R, 50
AMP complete with plate.
1.1.1.C.2.b. Category Four Approved Products. See Section 01 6200 for
definitions of Categories:
1.1.1.C.2.b.1) Cooper: 1258.
1.1.1.C.2.b.2) Hubbell: HBL9450A.
1.1.1.C.2.b.3) Leviton: 279.
1.1.1.C.2.b.4) Pass & Seymour: 3894.
1.1.1.C.3.
Ground Fault Circuit Interrupter (GFCI):
1.1.1.C.3.a. 15 AMP, specification grade.
1.1.1.C.3.b. Category Four Approved Products. See Section 01 6200 for
definitions of Categories:
1.1.1.C.3.b.1) Cooper: GF15W.
1.1.1.C.3.b.2) Hubbell: GF5252WA.
1.1.1.C.3.b.3) Leviton: 8599-W.
1.1.1.C.3.b.4) Pass & Seymour: 1594-W.
EDIT REQUIRED: Delete following paragraph if basketball backstops not motorized or if not
included in Project.
1.1.1.C.4.
Basketball Standard Receptacle:
1.1.1.C.4.a. Three pole, four wire grounding, 125 / 250V, locking type, NEMA
L14-20R, 20 AMP, complete with plate.
1.1.1.C.4.b. Category Four Approved Products. See Section 01 6200 for
definitions of Categories:
1.1.1.C.4.b.1) Cooper: CWL1420R.
1.1.1.C.4.b.2) Hubbell: HBL2410.
1.1.1.C.4.b.3) Leviton: 2410.
1.1.1.C.4.b.4) Pass & Seymour: L1420-R.
EDIT REQUIRED: Delete following paragraph for Heritage 09T and Phased Meetinghouse
Standard Plans.
For other Meetinghouse Standard Plans, delete following paragraph if Section 27 1501
‘Communications Horizontal Cabling’ IS included in Project.
Wiring Devices
-5-
26 2726
Project Number
Project Date
Project Name
1.1.1.D. Telephone Jacks:
1.1.1.D.1.
Desk Type:
1.1.1.D.1.a. 4 conductor, screw terminals, voice grade.
1.1.1.D.1.b. Category Four Approved Products. See Section 01 6200 for
definitions of Categories:
1.1.1.D.1.b.1) Cooper: 3532-4W.
1.1.1.D.1.b.2) Leviton: 40249-W.
1.1.1.D.1.b.3) Pass & Seymour: TPTE1-W.
1.1.1.D.1.b.4) Suttle: 625B4-4-85.
1.1.1.D.2.
Wall Type:
1.1.1.D.2.a. 4 conductor, screw terminals, voice grade.
1.1.1.D.2.b. Category Four Approved Products. See Section 01 6200 for
definitions of Categories:
1.1.1.D.2.b.1) Cooper: 3521-4W.
1.1.1.D.2.b.2) Leviton: 40257-W.
1.1.1.D.2.b.3) Pass & Seymour: WMTE14-W.
1.1.1.D.2.b.4) Suttle: 630AC4-85.
1.1.1.D.3.
Module Type:
1.1.1.D.3.a. For use in data faceplates.
1.1.1.D.3.b. 8 conductor, punch-down, voice grade.
1.1.1.D.3.c. Type Two Acceptable Products:
1.1.1.D.3.c.1) Siemon: MX3-F-U3-02.
1.1.1.D.3.c.2) Equal as approved by Architect before use. See Section 01
6200.
EDIT REQUIRED: Delete following paragraph for Heritage 09T and Phased Meetinghouse
Standard Plans.
For other Meetinghouse Standard Plans, delete following paragraph if Section 27 1501
‘Communications Horizontal Cabling’ IS included in Project.
1.1.1.E. Data Jacks:
1.1.1.E.1.
For use in data faceplates.
1.1.1.E.2.
8 conductor, punch-down T568B wiring configuration, CAT 6.
1.1.1.E.3.
Type Two Acceptable Products:
1.1.1.E.3.a. Flat Jack: Siemon MX6-F02.
1.1.1.E.3.b. Angled Jack: Siemon MX6-02.
1.1.1.E.3.c. Equal as approved by Architect before use. See Section 01 6200.
1.1.1.F. Plates:
1.1.1.F.1.
Standard Cover Plates:
1.1.1.F.1.a. Office / Occupied Areas:
1.1.1.F.1.a.1) Nylon or high impact resistant thermoplastic.
1.1.1.F.1.a.2) Color shall match wiring device.
1.1.1.F.1.b. All Other: Stainless Steel.
1.1.1.F.1.c. Ganged switches shall have gang plates.
1.1.1.F.1.d. Category Four Approved Products. See Section 01 6200 for
definitions of Categories:
1.1.1.F.1.d.1) Cooper.
1.1.1.F.1.d.2) Hubbell.
Wiring Devices
-6-
26 2726
Project Number
Project Date
1.1.1.F.1.d.3)
1.1.1.F.1.d.4)
Project Name
Leviton.
Pass & Seymour.
EDIT REQUIRED: Delete following paragraph for Heritage 09T and Phased Meetinghouse
Standard Plans.
For other Meetinghouse Standard Plans, delete following paragraph if Section 27 1501
‘Communications Horizontal Cabling’ IS included in Project.
1.1.1.F.2.
Data Faceplates:
1.1.1.F.2.a. Type Two Acceptable Products:
1.1.1.F.2.a.1) Single Module: Siemon MX-FP-S-01-02.
1.1.1.F.2.a.2) Two Modules: Siemon MX-FP-S-02-02.
1.1.1.F.2.a.3) Equal as approved by Architect before use. See Section 01
6200.
1.1.1.F.3.
Weatherproof In-Use Receptacle Covers:
1.1.1.F.3.a. NEMA 3R rated.
1.1.1.F.3.b. Cast aluminum.
1.1.1.F.3.c. Compatible with GFCI receptacles.
1.1.1.F.3.d. Complete with weather resistant gaskets and stainless steel
screws.
1.1.1.F.3.e. Category Four Approved Products. See Section 01 6200 for
definitions of Categories:
1.1.1.F.3.e.1) Hubbell: WP26MH, horizontal; WP26M, vertical.
1.1.1.F.3.e.2) Intermatic: WP1010HMC, horizontal; WP1010MC, vertical.
1.1.1.F.3.e.3) Red Dot: CKMG, horizontal; CKMGV, vertical.
1.1.1.G.Occupancy Sensors:
1.1.1.G.1.
Ceiling, ultrasonic type.
1.1.1.G.1.a. Complete with sensor and combined relay / control transformer.
1.1.1.G.1.b. Category Four Approved Products. See Section 01 6200 for
definitions of Categories:
1.1.1.G.1.b.1) Leviton:
1.1.1.G.1.b.1.a) Sensor: OSC10-U
1.1.1.G.1.b.1.b) Relay / Transformer: OSP20-ODO.
1.1.1.G.1.b.2) Hubbell:
1.1.1.G.1.b.2.a) Sensor: OMNI-US500.
1.1.1.G.1.b.2.b) Relay / Transformer: 120 V: MP 120 A.
1.1.1.G.1.b.3) Novitas:
1.1.1.G.1.b.3.a) Sensor: 01-083.
1.1.1.G.1.b.3.b) Relay / Transformer: 120 / 277 V, 13-0511.
1.1.1.G.1.b.4) Pass & Seymour: 120 V.
1.1.1.G.1.b.4.a) Sensor: US1001.
1.1.1.G.1.b.4.b) Relay / Transformer: PWP120.
1.1.1.G.1.b.5) Tork:
1.1.1.G.1.b.5.a) Sensor: OSC10U.
1.1.1.G.1.b.5.b) Relay / Transformer: 120 V: TRPD.
1.1.1.G.1.b.6) Watt Stopper:
1.1.1.G.1.b.6.a) Sensor: W-500A.
Relay / Transformer: 120 V: B120E-P.
1.1.1.G.2. Ceiling, passive infrared type.
Wiring Devices
-7-
26 2726
Project Number
Project Date
Project Name
1.1.1.G.2.a. Complete with sensor and combined relay / control transformer.
1.1.1.G.2.b. Category Four Approved Products. See Section 01 6200 for
definitions of Categories:
1.1.1.G.2.b.1) Leviton:
1.1.1.G.2.b.1.a) Sensor: OSC15-IOW.
1.1.1.G.2.b.1.b) Relay / Transformer: OSP20-0D0.
1.1.1.G.2.b.2) Hubbell:
1.1.1.G.2.b.2.a) Sensor: OMNI-IRL.
1.1.1.G.2.b.2.b) Relay / Transformer: 120 V: MP 120 A.
1.1.1.G.2.b.3) Pass & Seymour: 120 V.
1.1.1.G.2.b.3.a) Sensor: CSU1100.
1.1.1.G.2.b.3.b) Relay / Transformer: PWP2120.
1.1.1.G.2.b.4) Tork:
1.1.1.G.2.b.4.a) Sensor: OSCW15P.
1.1.1.G.2.b.4.b) Relay / Transformer: 120 V: TRP-D.
1.1.1.G.2.b.5) Watt Stopper:
1.1.1.G.2.b.5.a) Sensor: CI-205.
1.1.1.G.2.b.5.b) Relay / Transformer: 120 V: B120E-P.
1.1.1.G.3. Ceiling, dual technology type.
1.1.1.G.3.a. Complete with sensor and combined relay / control transformer.
1.1.1.G.3.b. Category Four Approved Products. See Section 01 6200 for
definitions of Categories:
1.1.1.G.3.b.1) Leviton:
1.1.1.G.3.b.1.a) Sensor: OSC10-MOW.
1.1.1.G.3.b.1.b) Relay / Transformer: OSP20-0D0.
1.1.1.G.3.b.2) Hubbell:
1.1.1.G.3.b.2.a) Sensor: OMNIDT1000.
1.1.1.G.3.b.2.b) Relay / Transformer: 120 V: MP 120 A.
1.1.1.G.3.b.3) Pass & Seymour: 120 V.
1.1.1.G.3.b.3.a) Sensor: CSD1000.
1.1.1.G.3.b.3.b) Relay / Transformer: PWP2120.
1.1.1.G.3.b.4) Tork:
1.1.1.G.3.b.4.a) Sensor: OSC20UP.
1.1.1.G.3.b.4.b) Relay / Transformer: 120 V: TRP-D.
1.1.1.G.3.b.5) Watt Stopper:
1.1.1.G.3.b.5.a) Sensor: DT-305.
1.1.1.G.3.b.5.b) Relay / Transformer: 120 V: B120E-P.
1.1.1.G.4. Wall switch, passive infrared type.
1.1.1.G.4.a. Features include sensitivity and time delay adjustments.
1.1.1.G.4.b. Manual ON / auto OFF capability.
1.1.1.G.4.c. Category Four Approved Products. See Section 01 6200 for
definitions of Categories:
1.1.1.G.4.c.1) Leviton: ODS10-IDW.
1.1.1.G.4.c.2) Hubbell: LHIRS1W.
1.1.1.G.4.c.3) Sensor Switch: WDS-SA-V-W.
1.1.1.G.4.c.4) Square D: SLSPWS1277UW.
1.1.1.G.4.c.5) Watt Stopper: PW-100-W.
EDIT REQUIRED: Delete following paragraph for Heritage 2009 and Phased
Meetinghouse Standard Plans.
Wiring Devices
-8-
26 2726
Project Number
Project Date
Project Name
For other Meetinghouse Standard Plans, delete following paragraph if Section 27 1501
‘Communications Horizontal Cabling’ IS included in Project.
1.1.1.H. Data Patch Panel:
1.1.1.H.1. Panel:
1.1.1.H.1.a. Meet requirements of TIA / EIA 568 Standard.
1.1.1.H.1.b. CAT 6, 48 ports groups in eight 6-port modules, T568B wiring
configuration, 19 inch (475 mm) width.
1.1.1.H.1.c. Category Four Approved Products. See Section 01 6200 for
definitions of Categories:
1.1.1.H.1.c.1) Leviton: 69586-U48.
1.1.1.H.1.c.2) Ortronics: OR-PHD66U48.
1.1.1.H.1.c.3) Suttle: STAR19110C6-48.
1.1.1.H.2. Mounting Bracket:
1.1.1.H.2.a. Hinged, wall mounted, 19 inch (475 mm) wide by 5 inch (125 mm)
deep.
1.1.1.H.2.b. Category Four Approved Products. See Section 01 6200 for
definitions of Categories:
1.1.1.H.2.b.1) Leviton: 49251-W62.
1.1.1.H.2.b.2) Ortronics: OR-604004068.
1.1.1.H.2.b.3) Suttle: 103B1.
1.1.1.I. Surge Protective Devices (for automatic sprinkler controller):
1.1.1.I.1. Type 3 as defined in UL 1449 and approved for exterior application.
1.1.1.I.2. Parallel metal oxide varistors, MOV, from each line to ground: 120 / 240
VAC. UV resistant construction with epoxy encapsulation of electrical
connections.
1.1.1.I.3. Include 1/2 inch (12.7 mm) mounting nipple and locknut.
1.1.1.I.4. Category Four approved Products. See Section 01 6200 for definitions of
Categories:
1.1.1.I.4.a. ASZ175B1 by Cooper Power Systems.
1.1.1.I.4.b. AG2401C by Intermatic.
1.1.1.I.4.c. 54175-SSA by Leviton.
1.1.1.I.4.d. TDS120XR50S by Square D.
PART 7 - EXECUTION
7.1.1.1 INSTALLATION
1.1.1.A. Install devices flush with walls, straight, and solid to box.
EDIT REQUIRED: Delete following paragraph if dimmer switches not used.
1.1.1.B. Label dimmer switch groupings with 1/16 inch (1.6 mm) thick laminated plastic
composition material with contrasting color core. Engraved letter shall be 1/4 inch (6
mm) high.
Wiring Devices
-9-
26 2726
Project Number
Project Date
Project Name
1.1.1.C. Install surge protective device in knock-out of junction box installed on bottom of
automatic sprinkler controller.
END OF SECTION
Wiring Devices
- 10 -
26 2726
Download