polymer additives
Product Innovations
Targeted to Customer Demands
BrüggemannChemical continuously develops speciality additives in response to the requirements of the
market. More than 30 years experience in the polymer industry, along with the technical expertise and close
partnerships with customers, are the basis for the timely development of innovative solutions. This enables
customers to enhance the value of their products to meet the ever increasing technical demands in their
marketplace.
A key part of the product range are tailor-made and well-balanced additive packages, so-called “One-Packs”. These are
mixtures of two or more additives and present solutions for specific applications in customized product forms, i.e. as
powder, pellet or masterbatch.
“One-Packs” offer significant
advantages for polymer producers
and converters:
n Improved dosing accuracy
n Less off-spec material
n Homogeneous resin quality
n Simplified manufacturing
n Lower cost in purchasing, warehousing
and quality control
BReduced operating cost!
“One-Packs” as dust-free pellets or
granules provide further benefits:
n Improved flow-ability, easier conveying and feeding
n Better workspace hygiene
BAnalogous to masterbatch
utilization, but more efficient
due to almost 100% concentration of active components!
High Performance Additives
for Polyamides And
other Engineering Thermoplastics
BRUGGOLEN® H – Heat Stabilizers
Copper based Antioxidants - Most Efficient Heat Stabilization of Polyamides
Classic Copper Salt based Heat Stabilizers
Highly effective antioxidants for Polyamides:
Bruggolen®H320/H321*
B powerful long-term protection at service temperatures up to 180°C
H324
B characteristic bluish or greenish discoloration
H326
B excellent quality and homogenity via specific production know-how
TP-H1212
B variety of stabilizers to serve customer requirements
TP-H8017
Copper Complex based Heat Stabilizers (Proprietary)
Bruggolen®H3386/H3387*
Unique combination of superior Copper based heat stabilization and natural color
H3350/H3351**
B long-term heat stabilization over the whole temperature range up to 180°C
B excellent UV-stabilization
B excellent dispersion
B H3351** masterbatch is suited for monofilament and fiber applications
Bruggolen®H3344/H3345*
Unique combination of long-term Copper based heat stabilization
H3376/H3377*
and high Comparative Tracking Index (CTI) up to 600V
B especially suited for electrical and electronic applications
B with H3376/H3377* no discoloration after conditioning
B high extraction resistance; no plate-out
B suited for fiber applications
Bruggolen®H3336/H3346*
Unique combination of superior heat stabilization and high CTI up to 550V
Processing Stabilizer
Bruggolen®H10
Best Protection of Polyamides against Discoloration
B reduced yellowing during melt processing
B protection against discoloration after ageing by heat and by UV-light
B H10 is superior to organic Phosphites because of it´s:
• excellent resistance against high shear stress and elevated temperatures
• non volatility
• resistance against hydrolysis
B especially suited for glass fiber reinforced Polyamides
Heat and Processing Stabilizer Packages based on Phenolic Antioxidants + Synergists
Bruggolen®H164
Long term protection of Polyamides for technical applications against heat ageing
B non discoloring
B excellent in glass fiber reinforced or mineral filled Polyamides
Bruggolen®H161
Long term protection of Polyamide fibers and of unfilled injection / extrusion grades
B very good color stabilization, e.g. during storage
B non-extractable; no plate-out
Bruggolen®H175
Very efficient color and long-term heat stabilization of Engineering Thermoplastics
B non-extractable, no plate-out
B effective also in Polyesters, Polycarbonates and Styrenics
B excellent color stabilization
Bruggolen®H180
Excellent processing stabilizer and antioxidant package for POM
B scavanges formaldehyde
Stabilizers against Hydrolysis and Aggressive Solvents – Amine based Antioxidants
Bruggolen®H20
Stabilization against hydrolysis and heat ageing
H2002
B best protection of polyamides against hot oils, fats and glycols
B characteristic brownish translucent discoloration
BRUGGOLEN® P – Processing Agents
Nucleating Agents
Bruggolen®P22
Highly efficient nucleating agent for Polyamides
B reduction of cycle time in injection molding
B improved dimensional stability - significant reduction
of warping in glass fiber reinforced Polyamides
B improved mechanical properties (tensile strength, stiffness, …)
B increase of heat distortion temperature
B non-volatile; non-extractable
Bruggolen®P250
P252
Highly efficient nucleating agent for Polyesters
B reduction of cycle time in injection molding
B improved dimensional stability
B improved mechanical properties (tensile strength, stiffness, …)
B increase of heat distortion temperature
B non-volatile; non-extractable
Lubricating / Demolding packages
Bruggolen®P12
P14
P130
Combination of internal and external lubricants
especially for Polyamides (P12, P14 and P130) and Polyesters (P130)
B very efficient due to low volatility and high thermal stability
B high gloss and good surface protection
B improved melt flow
B excellent mold release
B improved dispersion of fillers
B broadened processing window
Processing One-Packs for Polyamides (Virgin Grades/Recyclates)
Bruggolen®P30/P31*
P32/P33*
P34/P35*
Ready-to-use synergistic packages for injection molding
B P30/P31* is specifically suited for recycling of fiber waste or regrind
B improved melt flow
B strongly reduced cycle times; very good mold release
B efficient color protection/processing stabilization
Processing Auxiliary (liquid) for Dry Blending
Bruggolen®P60
Improved quality of blends with polymer chips + additive powder
B reduced separation during transport
B improved additive dispersion
BRUGGOLEN® M – Modifiers
Chain Extenders for Polyamides
Bruggolen®M1251**
M1253**
Unique increase of molecular weight via linear chain extension (no cross-linking)
B upgrade of injection to extrusion grades
B increase of impact strength
B increase of elongation at break
Typical applications in extrusion, blow-molding, recycling and injection molding
M1253** is also suited for monofilament and fiber applications
Further Modifiers
Bruggolen®M21
Solid plasticizer for Polyamides, ABS etc.
B toughening and improved melt flow
Bruggolen®M30**
Carbon Black Masterbatch in PA6 carrier
B Optimized dispersion
BRUGGOLEN® L – Light Stabilizers
Light Stabilizers/Optical Brightener for Engineering Thermoplastics
Bruggolen®L11
Very efficient optical brightener + stabilizers package
B brightens colors
B better color stability due to resistance to high processing temperatures
B masking of yellowish discoloration
Bruggolen®L20
TP-L1206
Effective protection against ageing caused by UV-light and heat
B synergistic UV-stabilization packages
B for pigmented (L20) and unpigmented systems (TP-L1206)
Further commercial BRUGGOLEN® – Polymer Additives and new test products
are available on request.
The information given herein and our application technological advices in verbal or written form and by cooperation in trials (e.g. in „Technical Information“) results to the best
of our knowledge. Nevertheless, our liability for damages and disadvantages which could originate from the usage of the technical information or from an induced violation
of external property rights is excluded. Our technical data sheets do not release you from own trials of your products and procedures on safety and suitability for the intended
purpose. Application, use and processing of our products and produced parts by you based on our technical data sheets are beyond our control and, hence, cannot constitute a
liability of our company. Apart from that our general terms and conditions apply for the sale of our products.
Products are in powder form except: * granules, ** masterbatch
further
PRODUCT GROUPS
AP-NYLON® Additives for Cast Nylon and Nyrim®
BrüggemannChemical is the leading supplier of raw materials and additives for nylon casting. The product
portfolio comprises special catalyst and activator systems, impact modifiers, heat stabilizers and processing
auxiliaries. Complementary, BrüggemannChemical provides the monomer AP-Caprolactam. Nyrim® stands
for specific nylon block copolymers which are processed via Reaction Injection Molding (RIM) and exhibit inherent
excellent low temperature impact resistance (down to - 30°C). BrüggemannChemical supports customers in
co-operations based on a team of experienced experts with a sophisticated technical/R&D center.
Toll Production
BrüggemannChemical offers diverse advanced production plants for chemical
synthesis, mixing, grinding and drying. A variety of products are produced in
constant quality and according to customer requirements.
Contacts
BrüggemannChemical
L. Brüggemann Kommanditgesellschaft
Salzstrasse 131
74076 Heilbronn, Germany
Phone +49 (0 ) 71 31 15 75-0
Fax
+49 (0 ) 71 31 15 75-25-111
info@brueggemann.com
BrüggemannChemical U.S., Inc.
1361 Baltimore Pike
Chadds Ford, PA 19317, USA
Phone +1 (610) 353 9852
Fax
+1 (610) 353 9853
usa@brueggemann.com
BrüggemannChemical Asia, Ltd.
Room 1705, 17/F, 625 King‘s Road
North Point, Island East, Hong Kong
Version 09/2013
Phone+852-3460-2527
Fax+852-3460-2522
asia@brueggemann.com
www.brueggemann.com