Magnetic LED Dimmable Power Supply (12V DC, 60W / 100W / 150W)
•
•
•
•
•
•
•
•
•
•
Enclosure Temperature does not exceed 65°C (149°F) in a 40°C (104°F) ambient, fully loaded
The actual transformer is encapsulated in the enclosure
The transformer is dimmable with the compatible dimmers
The transformer uses a class B (130°C or 266°F) insulation system
The transformer has a manual reset thermal circuit breaker on the secondary side
Wiring compartment has 3 knockouts sized for 3/4 inch screw cable connectors
The wiring compartment cover hinged with rivets and opens vertically from bottom to top
NEMA 3R rated enclosure
UL listed
Class 2 compliant (60W and 100W versions only)
Compatible Dimmers
Those dimmers are confirmed to be compatible. Use only those dimmers with the power supply.
For LW20-OMDC60W12VDC (60 Watt) only (not for 100 & 150W versions):
• DVELV-300P Lutron Diva Single-Pole Preset Dimmer, electronic low voltage
• SELV-300P Lutron Skylark Single-Pole Preset Dimmer, electronic low voltage
• NTELV-300 Lutron Nova T Single-Pole Slide Dimmer 300W electronic low voltage
(120V~ 60Hz)
• CTELV-303P Lutron Skylark Contour Single-Pole / 3-Way Preset Dimmer 120V 60Hz
electronic low voltage
For LW20-OMDC100W12VDC (100 Watt) and LW20-OMDC150W12VDC (150 Watt):
• DVLV-600P Lutron Diva Single-Pole Preset Dimmer, Magnetic Low Voltage
• DVLV-603P Lutron Diva Dimmer with Locator Light 3-Way 600VA 450W Magnetic Low
Voltage
• DVSCLV-600P Lutron Diva Single-Pole Preset Dimmer, Magnetic Low Voltage
Lutron Diva Satin 3-Way Magnetic Low Voltage Dimmer
• DVSCLV-603P
NOTES:
1. Output voltage in table 1 with 120VAC applied and fully loaded.
2. Maximum no load input current : 0.6A
3. Enclosure Temperature does not exceed 65oC in a 40OC ambient, fully loaded.
4. The actual transformer 100VA is encapsulated in the enclosure.
5. The transformer
dimmable with
all dimmers that provide symmetrical form of the
60 Wattisversion:
LW20-OMDC060W12VDC
current under any condition.
100 are
Watt
version:
6. Input leads
18 AWG
outputLW20-OMDC100W12VDC
leads are 12 AWG. Lead insulation is 105oC.
150 Watt
version:
7. The transformer
uses
a class B LW20-OMDC150W12VDC
(130oC) insulation system.
4 3/32
Specifications
SKUs
3 3/32
8. The transformer
has a manual
reset thermal
10A circuit
breaker with
on theBoost:
secondary
side.
Input: 120VAC
50/60Hz,
Output:
12VDC,
13VDC
9. Wiring compartment has 2 knockouts sized for 3/4 inch screw cable connectors.
60 Watt
version:
lead:
input lead:
18AWG
10. The wiring
compartment
coveroutput
hinged with
rivets18AWG,
and opens vertically
from bottom
to top.
11. The enclosure,
available
in blackoutput
powder coated
stainless steel
is NEMA
rated.
100 Watt
version:
lead: or12AWG,
input
lead:3R18AWG
12. The Transformer
is UL
listed. ULoutput
file number:
E194005.
150 Watt
version:
lead:
12AWG, input lead: 18AWG
13. The label contains Technomagnet's catalog number and electrical rating.
Power
Lead wires
Lead insulation
105°C
(221°F)
14. The boost
tap option
is indicated by the marked check box on the label.
Ratings
UL listed (UL file No. E194005)
Class 2 compliant (60W and 100W versions only)
Enclosure: NEMA 3R rated
8
INPUT
Circuit diagram
OUTPUT
120VAC Pri.
Boost Pri.
(Optional)
60 Watt version shown
12VDC Sec.
COM Pri.
COM Sec.
Dimensions Table 1.
Output Volts
120AC
12
T TechnoMagnet
M Interactive Lighting Servers
LTD.
Boost
13
*-3"
!-("
#&*.2
)0//////
!%42
-'12
60 Watt version
(),"%-*$"
!"#$%&'(&)*+
$562
'-%(7*82 ODC100SDC %"12
15547 Cabrito Road
Van Nuys, CA 91406
'-."////
#$-,"
no scale
A
Compact outdoor 12VDC
100VA Low voltage
Transformer.
100 & 150 Watt version
! 33 35th St. 6th Floor Brooklyn, NY 11232 • Phone: (800) 986-0169 • Fax: (212) 677-6945 • info@ledwaves.com
1 of 1