Windows, Macintosh
Windows Users
Macintosh Users
Step 1
PC Connection
Manual
Step 1
System Requirements
<ACD Showtime! for PENTAX>
(6 languages: English, French, German, Spanish, Italian, Japanese)
• OS
• CPU
Windows System Requirements
First, check the system requirements for the provided software.
•
•
•
•
•
•
•
• The software cannot be used on Windows 95.
• In order to play movies on Windows 98SE/Me/2000/XP, you are required to install
Windows Media Player 9.0 or later. (CPU: Pentium4 2.0GHz or higher, or PentiumM
1.0GHz or higher recommended)
• You cannot play movies shot by Optio S5z on Windows 98/NT.
USB connection
Step 2
You can transfer images and movies captured with a digital camera to your computer and
then organize, display, edit, print, and share them by installing the software recorded on the
provided CD-ROM to your computer and connecting your digital camera to your computer
with the USB cable. This section explains how to install the provided software “ACDSee for
PENTAX” and the other necessary preparations for enjoying your digital camera pictures and
movies on your computer.
Refer to your manual for the instructions of your computer and OS.
QuickTimeTM and QuickTime logo are trademarks used under license. The QuickTime logo
is registered in U.S. and other countries.
• OS
: Windows 98/98SE/Me/2000/XP (Home Edition/Professional)
(USB driver must be installed on Windows 98/98SE)
• USB port must be standard equipment
Install the USB driver on your PC.
Application Software
<ACDSee for PENTAX 2.0, ACD photostitcher and FotoSlate 3.0>
(9 languages: English, French, German, Spanish, Italian, Russian, Chinese [traditional and
simplified], Korean, Japanese)
Step 3
Step 3
Install the image processing software
(ACDSee for PENTAX 2.0) on your
PC.
Software Provided
•
•
•
•
•
•
∗on reverse side
Install the image processing software
(ACDSee for PENTAX) for
Macintosh.
OS
: Windows 98SE/Me/NT/2000/XP (Home Edition/Professional)
CPU
: Pentium or higher recommended
Memory
: 64MB minimum
Hard Disk space : 40MB minimum
Monitor
: Display adapter capable of displaying a minimum of 256 colors
Internet Explorer 5.0 or later
The versions of Internet Explorer, Windows Installer Service required for use of ACDSee for PENTAX 2.0 and
ACD Showtime! for PENTAX are not included in the provided CD-ROM (S-SW35). These can be downloaded
from the following sites and installed.
• Internet Explorer
http://www.microsoft.com/ie
• Windows Installer Service
http://support.microsoft.com/default.aspx?scid=kb;EN-US;292539
Macintosh System Requirements
You cannot play movies shot by OptioS5z on a Macintosh.
∗ Some formatted files like MOV-formatted movie files are required to have QuickTime 6.0
Windows
: Windows 98SE/Me/NT/2000/XP (Home Edition/Professional)
: Pentium III 500MHz or higher (Pentium4 2.0GHz or higher
recommended)
Memory
: 128MB minimum (512MB or higher recommended)
Hard Disk space : 50MB minimum
Monitor
: Display adapter capable of displaying a minimum of 256 colors
Internet Explorer 5.0 or later
QuickTime 6.0 or later
Windows Media Player 7.1 or later
DirectX 9.0 or later
or later, DirectX 9.0 or later, Windows Media Player 7.1 or later, to display.
• ACDSee for PENTAX 2.0 (Image viewing/editing software)
ACD photostitcher (Panorama image editing software)
FotoSlate 3.0 (Image layout and printing software)
ACD Showtime! for PENTAX (Movie editing software)
• Windows Media Player
• DirectX
• USB driver for Windows 98/98SE
Step 4
∗ To install ACDSee for PENTAX 2.0, Windows Installer Service Version 2.0 may be
∗on reverse side
Set up your digital camera for connecting with your computer.
Step 5
Macintosh
∗on reverse side
Connect the camera and your PC,
and transfer images.
• ACDSee for PENTAX (Image viewing software)
ACD photostitcher (Panorama image editing software)
Step 5
USB connection
required.
∗ ACD Showtime! for PENTAX is also installed when performing standard installation of
ACDSee for PENTAX 2.0 (However, ACD Showtime! for PENTAX cannot be used if
system requirements are not met.).
∗ Operation is not guaranteed on all PCs meeting the system requirements.
• OS
: Mac OS 9.2/X (Ver. 10.1, 10.2, 10.3)
• USB port must be standard equipment
∗ Installation of the driver is not necessary.
Application Software
<ACDSee for PENTAX and ACD photostitcher>
(6 languages: English, French, German, Spanish, Italian, Japanese)
∗on reverse side
• OS
: Mac OS 9.2 or later (requires QuickTime 6 or later and the latest
version of CarbonLib)
• CPU
: PowerPC 266MHz or higher
• Memory
: 8MB minimum
• Hard Disk space : 6MB minimum
Connect the camera and your
Macintosh, and transfer images.
∗ Operation is not guaranteed on all PCs meeting the system requirements.
Enjoy viewing and editing images transferred to your computer with the
image processing software (ACDSee for PENTAX).
∗ For details, see the “ACDSee for PENTAX User Guide” supplied with
the software.
57519
01-200505 Printed in Philippines
Windows
Step 2
Installing the USB Driver
6
For Windows98/98SE users, it is necessary to install a USB driver into your computer.
If you are a Windows Me/2000/XP user, turn on your computer first and start from Step 6 in
the instruction.
1
2
Windows
Turn your camera off and plug the provided USB cable into your camera
and into an available USB port on your computer.
Confirm that the USB Connection mode is set to [PC] before connecting the USB cable.
Default setting is [PC].
Installing the Software
Installing the Image Processing Software
(ACDSee for PENTAX 2.0)
Insert the CD-ROM (S-SW35) into your CD-ROM drive.
Follow the on-screen guidance and enter the registration
information when the Setup screen appears.
Reboot your PC after installation is finished (Other settings
are not necessary during installation).
• Windows Media Player 7.1 or later must be installed in your PC to install ACDSee for
PENTAX 2.0.
• When multiple accounts have been setup in Windows 2000 or Windows XP, log on with
an account that has administrative rights before installing the software.
Display the PENTAX Software Installer screen following the steps below.
1) Click [Start], then select [My Computer].
2) Double-click the CD-ROM Drive (S-SW35) icon.
3) Double-click [Setup] (Setup.exe).
1
2
Click your applicable language.
You can choose the languages from the displayed screen.
A selection screen to install your desired software is
displayed.
5
Click [ACDSee™].
This section describes the procedures for installing ACDSee for PENTAX 2.0, which lets you
view and edit images transferred to your PC.
• If the PENTAX Software Installer screen does not appear
4
5
Turn on your computer.
The PENTAX Software Installer screen is displayed on the desktop.
3
Step 3
The InstallShield Wizard screen will appear.
Follow the instruction on the screen.
Complete InstallShield Wizard screen will appear.
Insert the CD-ROM (S-SW35) into the CD-ROM drive.
The PENTAX Software Installer screen appears shortly.
7
8
Click [USB Driver] on the Software Installer
screen
Turn your PC on.
• If the PENTAX Software Installer screen does not appear
Display the PENTAX Software Installer screen following the steps below.
1) Double-click [My Computer] on the desktop.
2) Double-click the [CD-ROM drive (S-SW35)] icon.
3) Double-click [Setup.exe].
Turn your camera on.
Your computer will automatically detect the camera as new hardware and window will display
a notification confirming [Hardware Found : PENTAX OPTIO S5z] (Windows Me/2000/XP)
or [Search for the best driver for your device (Recommended)] (Windows 98/98SE) in the
task bar recognized area to begin the installation.
Click [Start], then select [My Computer] (Windows XP).
When using Windows 98/98SE/Me/2000, double-click [My Computer] on the desktop.
When the installation is completed, your camera can then be found in the [My Computer]
window as [Removable Disk]. Be sure that [Removable Disk] is displayed in the [My
Computer] window.
3
You can choose the languages from the
displayed screen.
The software selection screen appears.
Click [Finish].
Reboot your computer after the screen closes.
If your PC is running Windows Media Player earlier than version
7.1, a message such as the one shown on the right may appear
during installation.
In this case, follow the instructions below to update Windows Media
Player before installing the software.
1 Cancel installation of ACDSee for PENTAX.
[Cancel] and click [Finish] when the message appears telling you
that the software has been successfully installed.
2 Follow 4 in Step 3 to install Windows Media Player first and then reinstall ACDsee for
PENTAX2.0.
The panoramic image software “ACD photostitcher”, the image layout and printing
software “FotoSlate 3.0”, and the movie editing software “ACD Showtime! for PENTAX”
are also installed when you install all program features of ACDSee for PENTAX 2.0
(complete installation).
Even when you complete the installation the icon of “ACD Photostitcher” is not displayed.
4
Install Windows Media Player and DirectX.
If Windows Media Player and DirectX are not installed in your
PC, install them before installing ACDSee for PENTAX 2.0.
Click [Windows media player] or [DirectX®]. Leave other
settings at default and click [Next] when the Setup screen
appears. When installation is completed, the software
selection screen reappears.
If QuickTime and DirectX are not installed in your PC, a message
such as the one shown on the right appears when ACDSee for
PENTAX 2.0 is run for its first time.
Click [Close] and install DirectX from the [PENTAX Software
Installer] screen.
∗ If DirectX is not installed in your PC, operation of ACDSee for
PENTAX 2.0 is not guaranteed.
Windows, Macintosh
Step 4
Macintosh
When the ACDSee Device Detector screen does not appear
Setting Up Your Digital Camera
4
Setting the USB Connection Mode to [PC]
1
2
3
4
5
6
Press the 3 button.
Press the four-way controller (5) to display the [H Setting] menu.
Use the four-way controller (23) to select [USB
Set-up
Connection].
Format
Sound
Press the four-way controller (5).
Date Adjust
A pop-up menu appears.
Use the four-way controller (23) to select [PC].
Press the OK button.
World Time
PC
PictBridge
USB Connection PC
MENU
5
Double-click the [ACDSee for PENTAX] icon on the
desktop.
This section describes the procedures for installing ACDSee for PENTAX, which lets you view
and edit images transferred to your Macintosh.
6
1
2
3
4
Double-click [Removable Disk].
Exit
Step 5
If the SD Memory Card has a volume label, the volume label name appears instead of
[Removable Disk]. A new unformatted SD Memory Card may show the manufacturer
name or model number.
7
• If the digital camera is connected to your PC in [PictBridge] USB Connection mode, the
images cannot be transferred. Disconnect the USB cable from your camera and PC,
follow the instructions in “Setting Up Your Digital Camera” to set the USB Connection
mode to [PC], and then reconnect the USB cable.
• We recommend using an AC Adapter D-AC8 (optional) when connecting your camera to
your computer. Your image data could be corrupted if your batteries run out during image
transfer.
5
Turn your Macintosh on.
Insert the CD-ROM (S-SW35) into the CD-ROM drive.
Double-click the CD-ROM (S-SW35) icon.
Double-click the [Install ACDSee] icon.
The PENTAX Software Installer screen appears.
Double-click the [Master Installer] icon to display the PENTAX Software Installer screen.
You can choose the languages from the
displayed screen.
A selection screen to install your desired software appears.
Double-click the [DCIM] folder.
Images are stored in folder [xxxPENTX], where “xxx” is a threedigit folder number.
Transferring Images to a Windows PC
If you connect your computer to the camera and as the power is switched on, the camera will
be recognized automatically. You can transfer an image to your computer after ACDSee
Device Searching display appears on the screen.
• If the message [CarbonLib-xxxxx could not be found] appears during installation;
You must add the extension file “CarbonLib” to the Extension folder in the System folder
in order to install the provided software in Mac OS 9.2.
This message appears when this extension file does not exist or when an older version
of the file exists.
The latest version of the CarbonLib file is available on the Apple website. Download the
file and then install it.
Apple website: http://www.apple.com/
∗Contact Apple for detailed information on how to use the CarbonLib file.
• If you install ACDSee for PENTAX, a photo-stitching software application, ACD
photostitcher, is installed at the same time.
• When you have completed the installation, folder will be created in ACDSee for
PENTAX. To run ACD photostitcher, double-click [ACD photostitcher] icon in the [ACD
photostitcher] folder.
Installing the Software
Installing the Image Processing Software
(ACDSee for PENTAX)
Double-click [My Computer].
• Do not connect the camera to your PC while [PictBridge] is selected for the USB
Connection mode.
• Do not connect the camera to your printer while [PC] is selected for the USB Connection
mode.
Windows
Step 3
6
8
Click [ACDSee™].
The setup screen appears. Follow the on-screen guidance to
input registration information and install the software.
Select the folders you want to copy to the PC.
Hold the [Ctrl] key on the keyboard while clicking on the folders in
which the images you want to copy are stored.
Select folders
9
Select [Copy To Folder...] from the [Edit] menu.
The Copy Files screen appears.
Connecting the Camera and PC
1
2
Turn your PC on.
With your camera turned off, connect to your PC using the USB cable.
10
11
Specify the destination folder.
Click [OK].
The image is copied to the PC.
Disconnecting the Camera from Your PC
Windows XP
3
Turn your camera on.
The ACDSee Device Detector screen appears automatically.
If the ACDSee Device Detector screen does not appear, display and copy the images
following the steps in “When the ACDSee Device Detector screen does not appear”.
1
2
Double-click the
in the task bar.
[Safely Remove Hardware] icon
The Safely Remove Hardware screen appears.
Macintosh
Transferring Images to a Macintosh
• If you connect the camera to a Macintosh with the USB connection mode set to
[PictBridge], you cannot transfer an image. Remove the camera from the Macintosh and
then set the USB mode to [PC]. Reconnect the USB cable by referring to “Setting Up
Your Digital Camera” in this manual.
• We recommend using an AC Adapter D-AC8 (optional) when connecting your camera to
your computer. Your image data could be corrupted if your batteries run out during image
transfer.
Select [USB Mass Storage Device] and click [Stop].
The [Stop a Hardware device] screen appears.
• While communicating with your computer via a USB cable, the status lamp blinks green.
• If there is no SD Memory Card in the camera, the images stored in the built-in memory
will be transmitted to your PC.
• Even if camera images are not transferred, they can be directly displayed on the
computer from a camera connected to the computer.
• When you edit an image, transfer the image to your computer.
3
Transferring Images
4
A message appears to indicate that the hardware can be safely
removed.
Confirm that [Acquire images from the device with
ACDSee] is checked and click [OK].
4
5
Select [USB Mass Storage Device] and click [OK].
Step 5
Connecting the Camera and Macintosh
1
2
Turn your Macintosh on.
With your camera turned off, connect to your Macintosh using the USB
cable.
Disconnect the USB cable from your PC and the
camera.
1
2
Double-click the
in the task bar.
It is convenient to use iPhoto, ImageCapture, or ACDSee Device Detector when you transfer
an image to your Macintosh. See your Macintosh user’s manual.
• Even if camera images are not transferred, they can be directly displayed on the
Macintosh from a camera connected to the Macintosh.
• To edit images, first transfer them to your Macintosh.
Disconnecting the Camera from Your Macintosh
1
2
Drag [untitled] on the desktop to the trash.
If the SD Memory Card has a volume label, drag the icon of that name to the trash.
Disconnect the USB cable from your Macintosh and the camera.
• If the camera (removable disk) is being used by an application such as ACDSee for
PENTAX, the camera cannot be disconnected until the application is closed.
• When you remove a USB cable, the USB mode will be cancelled, switching to Playback
mode with the lens retracted.
Windows 2000/Me
Click [Next].
Transferring Images
[Unplug or eject hardware] icon
The Unplug or Eject Hardware screen appears.
Select [USB Mass Storage Device] and click [Stop].
The Stop a Hardware device screen appears.
6
Select an image to copy and click [Next].
3
7
3
Select [USB Mass Storage Device] and click [OK].
Click [Finish].
The camera is recognized as [untitled] ([NO_NAME] in Mac OS X) on the
desktop. The drive name can be changed.
A message appears indicating that the hardware can be safely
removed.
Specify the name and save destination of the image,
and click [Next].
The image is copied to the PC.
8
Product Registration on the Internet
Turn your camera on.
4
5
Click [OK].
Disconnect the USB cable from your PC and the
camera.
The ACDSee for PENTAX 2.0 Browser starts.
• If the camera (removable disk) is being used by an application such as ACDSee for
PENTAX 2.0, the camera cannot be disconnected until the application is closed.
• When you remove a USB cable, the USB mode will be cancelled, switching to Playback
mode with the lens retracted.
• If the SD Memory Card has a volume label, the volume label name appears instead of
[untitled]. A new unformatted SD Memory Card may show the manufacturer name or
model number.
• While communicating with a Macintosh via a USB cable, the status lamp blinks green.
• If there is no SD Memory Card in the camera, the images stored in the built-in memory
will be transmitted to your Macintosh.
Please click [Product Registration] on the software selection
screen in Step 3 .
A world map for Internet Product Registration is displayed.
If your PC is connected to the Internet, click the displayed
country or region and then follow the instructions to register
your product.
Thank you very much for your cooperation.
Only customers in displayed countries and regions can register their products on the
Internet Product Registration.