Power Supply
Choice of 3 Programmable Power Supplies that are light, compact and stackable
FEATURES
•
•
•
•
•
Parameter
Applications
All 3 types of power supplies have the same compact, light and stackable design
Universal input power supply accepts all domestic and international voltages.
Parameters are set by pressing UP/DOWN arrow buttons in combination with a MODE
button
Power output is controlled by setting a maximum value for voltage or current. The power
supply automatically “crosses over” or switches the limiting parameter according to the programmed limits as the resistance of the electrical load changes during a run.
Safety features on all three models include no load detection, sudden load change protection, over voltage protection and automatic power failure recovery
SPECIFICATIONS for EPS-300 X
SPECIFICATIONS for High Current
EPS-250 X
SPECIFICATIONS for EPS-600
SDS-PAGE, Lipoprotein Gels,
Horizontal Electrophoresis,
DGGE/CDGE/TTGE/DTSK
SDS-PAGE, Electroblotting (Western tank,
Semi-Dry, Northern)
SDS-PAGE, Mega-Gel, Horizontal Agarose Gels,
Vertical Agarose Gels, Semi-Dry transfer, Large
Format, Mini-Gel tank transfer
Input
100 - 240 VAC, 50-60 Hz
100 - 240 VAC, 50-60 Hz
100 - 240 VAC, 50-60 Hz
Output voltage (V)
1-300, 1 V steps, CC or CV
2 – 250, 1 V steps, CC or CV
5 – 600, 1 V steps, CC or CV
1 – 500, 1 mA steps
10-2500, 1 mA steps
1 – 500, 1 mA steps
90 W
200 W
120 W
4 pairs, color coded, recessed for safety
4 pairs, color coded, recessed for safety
4 pairs, color coded, recessed for safety
Output current (mA)
Maximum output power
Output jacks
Output connector
Timer (Minutes)
User interface
Dimension (L x W x H)
Weight
Operating Conditions
4mm plugs
4mm plugs
4mm plugs
1-1440 minutes (24 hours), 1 min. increment
1-1440 minutes (24 hours), 1 min. increment
1-1440 minutes (24 hours), 1 min. increment
3 digit, red LED membrane keypad
3 digit, red LED membrane keypad
3 digit, red LED membrane keypad
320 x 240 x 73 mm
320 x 240 x 73 mm
320 x 240 x 73 mm
Net ~2.4 kg (5.3 lb) Gross ~3.4 kg (7.5 lb)
Net ~2.4 kg (5.3 lb) Gross ~3.4 kg (7.5 lb)
Net ~2.4 kg (5.3 lb) Gross ~3.4 kg (7.5 lb)
Indoor use: 0-40ºC
Relative humidity: 0% to 90% non-condensing
Altitude: < 2000m
Indoor use: 0-40ºC
Relative humidity: 0% to 90% non-condensing
Altitude: < 2000m
Indoor use: 0-40ºC
Relative humidity: 0% to 90% non-condensing
Altitude: < 2000m
ORDERING INFORMATION
CAT. #
DESCRIPTION
POWER SUPPLIES
EPS-300 X
Power Supply, CE, 1-300V, 1-500mA
EPS-250 X
High Current Power Supply, CE, 2-250V, 10-2500mA
EPS-600
Power Supply, CE, 5-600V, 1-500mA
High Voltage Programmable Power Supply
FEATURES
•
•
•
•
•
Parameter
Applications
Input
Output voltage (V)
Output current (mA)
Maximum output power
Temperature Control
Output jacks
The EPS-3000P-II power supply is designed to provide constant voltage, current, or power in both
Manual and Programmed modes of operation commonly used in
electrophoresis applications.
Universal input power supply accepts all domestic and international voltages.
The EPS-3000P-II can deliver up to 400W of total output power.
One to four sets of electrophoresis cells can be connected in parallel and run simultaneously.
Safety features include no load detection, sudden load change protection, over voltage protection
and automatic power failure recovery
SPECIFICATIONS for EPS-3000P-II
DNA Sequencing, Large Format Vertical Electrophoresis
85-265 VAC, 50-60 Hz
20-3000, 1 V steps, CC or CV
1-400, 1 mA steps
400W
0-90ºC, adjustable in 1ºC steps
4 pairs, color coded, recessed for safety
Output connector
4mm plugs
Timer
0-100 hours
User interface
Dimension (L x W x H)
Weight
Operating Conditions
ORDERING INFORMATION
3 digit, red LED membrane keypad
31 x 27 x 13.3cm
CAT. #
Net ~2.4 kg (5.3 lb) Gross ~3.4 kg (7.5 lb)
Indoor use: 0-40ºC, Relative humidity: 0% to 90% non-condensing
Altitude: < 2000m
phone: (858) 755-4959
DESCRIPTION
POWER SUPPLIES
EPS-3000P-II
High Voltage Power Supply, CE, 20-3000V, 1-400mA
To l l F r e e : ( 8 0 0 ) 2 4 3 - 4 9 5 9