19" Rack Cabinet Systems
19" Floor Type Rack Cabinets
19" Floor Standing Rack Cabinets
The general structure of the cabinets and Material
strength is the same as mentioned in previous pages
800x800mm cabinet providing permanent solutions
to the end users with the perfect design.
Designed for active and passive devices that require
high-density cabling and most important features are
total of 8 different cable entry points & large internal
volume giving ease and comfort to end users for smart
cabling.
19" Floor Standing Rack Cabinets
Typical Applications
• Networking/Cabling/Broadcast
• 19” Electronic Equipment Housing
• Communication Systems
• IT Systems
Standard Features
Front Door
The front door is designed to provide superior security with
latched lock mechanism and decorative view together , fulllength smoked and shatterproof glass door deployed in
metal frame , easily rotated to the left or right directions by
special spring hinge , in case of needs 3 points and single point
locking systems are available depends on customer
requirements.
Side Panel
Lockable, removable complete with sliding locks , It offers
easy access with lockable and removable structure.
Rear Door
Double opening spring hinged rear door also designed to
provide superior security as front door and side panels , there
are two lock options as barrel lock and latched swing handle
lock mechanisms are available .
Bottom case
Bottom case also has special structure that allowed to use
fonctional with 19“ removable base plates 3-5-8 pcs
According to a depth of rack cabinet , Bottom case have a
structure that would increase resistance and strength of
cabinet by special corner support parts t:2mm
Multiple Cable access points
Multiple Cable access points covered with brush to eliminate
damages of cable bundles and provide protection against dust
and insects
• Bottom case cable entry with brush : 50x400mm
• 2U Rear door cable entry panel with brush 50x250mm
26U and above
• Top cover cable entry 50x400mm for 600x1000mm
Corner profile
Special corner profile structure consist by total 24 ea bending
points , thus offers enough robustness against the high load
applications and designed for aestetic and decorative
appearance its faraway from a disturbing image.
C-Rails
C-Rails ( side support ) equipped with the holes for fixing 19»
Mounting angles and increase the stability of equipment
mounting and sliding shelf from 4 points by screws . T:1.5mm
4-bending
19 “ Mounting Angles
Vertical mounting rails are fully depth adjustable
and high carrying capacity.
Levelling feet
Levelling feet is included as a standard feature , also suitable
for use with castor ( 4 point fix )
Top cover
Raised top cover design in special forms giving us very
aestetic view and professional protection against the dripping
water , dust flow and warious external factors , this feature
allows the throw out hot air from 1cm height free space and
special slots.
STANDARDS
• ISO9001-2008
• TSE : EN 61587-1 Mechanical structure
• Degrees Of Protection: IP20 or IP55
• Surface Treatment: Fosfat coating
• Painting: Electro static powder Ral7035 / Ral9005
• Load Carrying Capacity: 900 kg
Cable entry points 3 pcs
• Rear with brush
• Left with plank panel
• Right with plank panel
Double Rear door
Rear Cable entry panel 2U
Low vented side panel
19" Base plates
Corner Profile
Ouick Release
Spring hinge
Security Options
3 point locking system
Single point locking system
Barrel lock system
Network controlled and proximity
electronic locking systems
Swing Handle Lock
Top Cover 1mm
Bottom & Up Case 1,5 mm.
2U Cablo Entry
Panel With
Brush
Sliding Lock
Double Opening
Rear Door
Barrel Lock
Side Panel 1mm
Swing Handle
Lock
Front Door
Frame 1,5 mm
Tempered Safety Glass
T: 4mm
Corner Profile
1,5 mm /
6 Bending
19" Base Plates
5 ea for D:800 mm
8 ea for D: 1000mm
Low Venting
19" Mounting Angle
1,5 mm
Shipment
Configuration
Part Description
Front Door
Material Thickness
1,5 mm
Shipment Configuration
1 ea
Glass
4 mm
1 ea Tempered safety glass
Side Panel
1 mm
2 ea
Rear Door
1,2 mm
1 ea
Corner Profile
1,5 mm
4 ea
C-Rails
1,5 mm
6 ea (3 Left / 3 Right)
2 mm
4 ea (2 Front / 2 Rear)
19" Mounting Angle
Top Cover
1 mm
1 ea
Bottom Case
1,5 mm
1 ea
Upper Case
1,5 mm
1 ea
19" Base plates
1,5 mm
3 ea for D:600mm / 5 ea for D: 800 mm
8 ea for D:1000mm
Levelling feet
M10
1 set : 4 pcs
Carton box
full packaging
Wooden pallet
1 ea - for each cabinets
The Best Protection Enclosures For Data and communication.
Black
Ral : 9005
Light Gray
Ral : 7035
19" Floor Standing Rack Cabinets
Orion Grand Floor standing 19" rack cabinets responding the needs of users with
choice of 5 different height dimensions.
Height Options
Width Options
Depth Options
Orior Grand Floor Standing Rack Cabinets
Product Code
Width (mm)
Depth (mm)
Inner Height (mm)
Outher (Height)
Product Code
Width (mm)
Depth (mm)
Inner Height (mm)
Outher (Height)
Professional Rack