PRODUCT SPECIFICATIONS
5R1UD-S12, 5R2UD-S24, 5R4UD-S48
Opt-X® UHDX Fiber Optic Rack-Mount Enclosures, 1RU, 2RU, & 4RU
APPLICATION
FEATURES
• Up to 144 fibers (using LC) in a 1RU enclosure, 288 fibers in a 2RU enclosure, and 576 fibers in a 4RU enclosure using HDX adapter plates or MTP cassettes
• Stylish, innovative design for advanced networks and active equipment
• Individual sliding trays remove completely to facilitate field terminations
• Sliding tray glides forward, providing accessibility to front and rear bulkheads after installation
• Side and rear entries for backbone trunk cabling
• Removable rear cover/door for open access in 1RU and 2RU enclosures
• One-person install of all enclosure sizes
• Rear brush guards (sold separately) minimize dust build up
• Visible port location identifiers
DESIGN CONSIDERATIONS
SPECIFICATION
Enclosures with sliding trays shall be available in 1RU,
2RU, and 4RU versions that accommodate termination
of up to 144, 288, or 576 fibers respectively (using LC
connectors). Individual sliding trays shall have a forward
stop, be removable for ease of installation, and minimize
the impact on surrounding fiber. Enclosures shall accept
LC, SC, and MTP® modular adapter plates and MTP
cassettes. Fiber cable routing and protection shall include
patch cord cable managers at entry/exit points, multiple
tie-down points for rear cable management, and a cable
strain-relief kit for incoming backbone fiber. The enclosure
design shall feature a front hinged door to provide
protection and concealment, and allow unobstructed
access to the patching area. 1RU and 2RU enclosures
shall feature a removable rear door, and 4RU enclosures
shall feature a rear hinged door. Enclosures shall be
designed for a one-person install and have visible port
location identifiers for poorly lit application environments.
Enclosures shall be constructed of 18-gauge steel,
5052 aluminum, and polycarbonate plastic for rigidity
and robustness. Enclosures shall be pre-configured or
make to order with respective adapter plates and MTP
cassettes, for easy ordering with one part number.
Page 1 of 3
•
•
•
•
•
•
•
•
•
Enclosures are sold unloaded or can be pre-configured at
www.leviton.com/configurator
Designed for pre-terminated solutions
Rear fiber guards prevent pinching or catching of fibers when sliding trays are engaged
Does not accept splice trays
Enclosures protrude 4.5 inches from mounting ears to align
with the Leviton Versi-Duct® Cable Management System
Accessory kit consists of cable ties, mounting ear screws,
and port ID card
Color scheme identifies parts that are fixed, moveable, and used for cable management
19-inch or 23-inch rack-mount options
Uses universal Opt-X Cable Clamp Kit
STANDARDS COMPLIANCE
• ANSI/TIA-568-C.3
PHYSICAL SPECIFICATIONS
Dimensions:
Materials:
See page two
Durable polycarbonate plastic, 5052-H32 aluminum, 18-gauge steel, powder-coated black
COUNTRY OF ORIGIN
Mexico
WARRANTY INFORMATION
For a copy of Leviton product warranties, visit
www.leviton.com/warranty.
Leviton Network Solutions
2222 - 222nd St. SE
Bothell, WA 98021-4416
Asia / Pacific
T +1.631.812.6228
E infoasean@leviton.com
Canada
T +1.514.954.1840
E pcservice@leviton.com
Caribbean
T +1.954.593.1896
E infocaribbean@leviton.com
China
T +852.2774.9876
E infochina@leviton.com
Colombia
T +57.1.743.6045
E infocolombia@leviton.com
tel 1-800-824-3005
tel +1-425-486-2222
appeng@leviton.com
www.leviton.com
Europe
T +33.6.8869.1380
E infoeurope@leviton.com
India / SAARC
T +971.4.886.4722
E infoindia@leviton.com
Mexico
T +52.55.5082.1040
E lsamarketing@leviton.com
Middle East & Africa
T +971.4.886.4722
E lmeinfo@leviton.com
South Korea
T +82.2.3273.9963
E infokorea@leviton.com
Copyright © 2016 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
Revised February 2016
5R1UD-S12, 5R2UD-S24, 5R4UD-S48
UHDX Fiber Rack-Mount Enclosures provide an interconnect or cross-connect between backbone horizontal
cable and active equipment while using minimum rack
space in a frame or cabinet. Enclosures allow for easy
installation of pre-terminated solutions, and are ideal
for high-density fiber applications in data centers,
equipment rooms, and central offices.
PRODUCT SPECIFICATIONS
5R1UD-S12, 5R2UD-S24, 5R4UD-S48
ELECTRONIC FILES
For CAD files, typical specs, or technical drawings (.DXF, .DWG), visit www.leviton.com.
8
5R1UD-S12
7
6
8
4
5
5R4UD-S48
7
3
6
2
5
1
4
D
D
19.8
19.80"
5R1UD-S12, 5R2UD-S24, 5R4UD-S48
D
20.00
20.00"
C
C
19.05"
19.05
18.37
18.37"
B
C
19.05"
19.05
18.37
18.37"
B
B
1.73
1.73"
6.97
6.97"
8
7
6
5R2UD-S24
A
5
4
A
D
8
7
6
3
LEVITON P/N: 001-5R1UD-S12
UNLESS OTHERWISE SPECIFIED:
DO NOT SCALE DRAWING.
ALL DIMENSIONS ARE IN INCHES.
ALL ANGLES ARE IN DEGREES.
REV: 1
ECO DESCRIPTION:
XXXX
ECO NUMBER CHGD APVD
REV.
DATE
1
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
73
1
D
A
LEVITON P/N: 001-5R4UD-S48
STATUS: In Work
8
4
5
2
The information in this document is
TOLERANCES
the exclusive PROPRIETARY
property of LEVITON MFG. CO.,
INCH
METRIC
INC. It is disclosed with the
.XX ± .01
.X
± .2 mm
understanding that acceptance or
review by the recipient constitutes .XXX ± .005 .XX ± .1 mm
an undertaking by the recipient:
(1) to hold this information in strict
ANGLES: ± 1/2°
confidence.
(2) not to disclose, duplicate, copy, THIRD ANGLE PROJECTION
or use the information, in whole or in
part, for any purpose other than that
for which disclosed.
6
2
Copyright 2009. Unpublished.
All Rights Reserved.
ALL PRINTED COPIES
ARE UNCONTROLLED
TITLE:
1RU TOP ASSEMBLY
-
DWN BY
HKV
CHK BY
-
DWG NO.
SIZE
D
04/04/2014
-
ENGRG
-
-
MFG
-
-
uhd spec sheet
PROJECT NO.
REV
5
1
SCALE:1:4
4
1
SHEET 1 OF 3
19.8
19.80"
C
C
B
B
19.05"
19.05
18.37
18.37"
3.48
3.48"
Page 2 of 3
LEVITON P/N: 001-5R2UD-S24
A
Leviton Network Solutions
2222 - 222nd St. SE
Bothell, WA 98021-4416
8
tel 1-800-824-3005
tel +1-425-486-2222
appeng@leviton.com
www.leviton.com
7
STATUS: In Work
UNLESS OTHERWISE SPECIFIED:
DO NOT SCALE DRAWING.
ALL DIMENSIONS ARE IN INCHES.
ALL ANGLES ARE IN DEGREES.
REV: 1
ECO DESCRIPTION:
XXXX
ECO NUMBER CHGD APVD
REV.
DATE
1
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
The information in this document is
TOLERANCES
the exclusive PROPRIETARY
property of LEVITON MFG. CO.,
INCH
METRIC
INC. It is disclosed with the
.XX ± .01
.X
± .2 mm
understanding that acceptance or
review by the recipient constitutes .XXX ± .005 .XX ± .1 mm
an undertaking by the recipient:
(1) to hold this information in strict
ANGLES: ± 1/2°
confidence.
(2) not to disclose, duplicate, copy, THIRD ANGLE PROJECTION
or use the information, in whole or in
part, for any purpose other than that
for which disclosed.
Asia / Pacific
T +1.631.812.6228
E infoasean@leviton.com
Canada
T +1.514.954.1840
E pcservice@leviton.com
Caribbean
T +1.954.593.1896
E infocaribbean@leviton.com
China
T +852.2774.9876
E infochina@leviton.com
Europe
T +33.6.8869.1380
E infoeurope@leviton.com
India / SAARC
T +971.4.886.4722
E infoindia@leviton.com
Mexico
T +52.55.5082.1040
E lsamarketing@leviton.com
Middle East & Africa
T +971.4.886.4722
E lmeinfo@leviton.com
6
5
4
Copyright © 2016 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
3
TITLE:
1RU TOP ASSEMBLY
-
DWN BY
HKV
04/04/2014
CHK BY
-
-
Copyright 2009. Unpublished.
All Rights Reserved.
2
A
ENGRG
-
-
MFG
-
-
Colombia
uhd spec sheet
T +57.1.743.6045
PROJECT NO.
D SCALE:1:4
SHEET 2 OF 3
E infocolombia@leviton.com
DWG NO.
SIZE
ALL PRINTED COPIES
ARE UNCONTROLLED
REV
1
1
South Korea
T +82.2.3273.9963
E infokorea@leviton.com
Revised February 2016
PRODUCT SPECIFICATIONS
5R1UD-S12, 5R2UD-S24, 5R4UD-S48
OPT-X® UHDX ENCLOSURE OPTIONS
ENCLOSURE
STYLE
ADAPTER PLATE OR MTP
CASSETTE SELECTION
NUMBER OF
ADAPTER PLATES
• 1RU
• 2RU
• 4RU
• SC adapter plate (6 fibers)
• LC adapter plate (12 fibers)
• MTP Adapter plate (6 ports)
• MTP-LC Cassette (12 fibers)
• 1-48
FIBER TYPE
• OM2
• OM3
• OM4
• OM4+
• OS2
ADAPTER TYPE
OPTIONS
CABLE
CLAMP KIT
MOUNTING EAR
POSITION
• LC
• LC (Violet)
• SC
• SC/APC
• MTP Key Up/Key Up
• MTP Key Up/Key Down
• Yes
• No
• 19
• 23
POLARITY
• MTP Method A
• MTP Method B (Core)
• MTP Method B (Edge)
• MTP Method C
DENSITY
Rack
Unit
Fibers
(using LC)
Fibers
HDX Adapter Plate/
(using 24-fiber MTP®)
MTP Cassette
Dimensions
Weight
(unloaded)
1RU
Up to 144 fibers
Up to 1,728 fibers
Up to 12
1.73" H x 19" W x 19" D
16 lbs
2RU
Up to 288 fibers
Up to 3,456 fibers
Up to 24
3.45" H x 19" W x 19" D
24 lbs
4RU
Up to 576 fibers
Up to 6,912 fibers
Up to 48
6.9" H x 19" W x 19" D
30 lbs
5R1UD-S12, 5R2UD-S24, 5R4UD-S48
Call 800.722.2082 or visit leviton.com/configurator to configure your enclosure.
NOTE: For unloaded basic part numbers, see table below.
OPT-X® UHDX RACK-MOUNT ENCLOSURES
Description
Part No.
1RU, empty, accepts up to 12 HDX cassettes or plates
5R1UD-S12
2RU, empty, accepts up to 24 HDX cassettes or plates
5R2UD-S24
4RU, empty, accepts up to 48 HDX cassettes or plates
5R4UD-S48
ACCESSORIES
Description
Part No.
Universal Opt-X Clamp Kit, Single Cable Grommet (for enclosure mounting)
5RCMP-KIT
Universal Opt-X Clamp Kit, Multiple Cable Grommet (for enclosure mounting)
5RCMP-KT2
Universal Opt-X Clamp Kit, Single and Multiple Cable Grommet (for rack mounting)
5RCMR-KIT
Brush Guard, 1RU (bag of 2)
5RBSH-1UN
Brush Guard, 2RU (bag of 2)
5RBSH-2UN
23" Rack-Mount Ears (bag of 2)
5REAR-023
Page 3 of 3
B16 6029
Leviton Network Solutions
2222 - 222nd St. SE
Bothell, WA 98021-4416
Asia / Pacific
T +1.631.812.6228
E infoasean@leviton.com
Canada
T +1.514.954.1840
E pcservice@leviton.com
Caribbean
T +1.954.593.1896
E infocaribbean@leviton.com
China
T +852.2774.9876
E infochina@leviton.com
Colombia
T +57.1.743.6045
E infocolombia@leviton.com
tel 1-800-824-3005
tel +1-425-486-2222
appeng@leviton.com
www.leviton.com
Europe
T +33.6.8869.1380
E infoeurope@leviton.com
India / SAARC
T +971.4.886.4722
E infoindia@leviton.com
Mexico
T +52.55.5082.1040
E lsamarketing@leviton.com
Middle East & Africa
T +971.4.886.4722
E lmeinfo@leviton.com
South Korea
T +82.2.3273.9963
E infokorea@leviton.com
Copyright © 2016 Leviton Manufacturing Co., Inc. All rights reserved. Subject to change without notice.
Revised February 2016