Discovering
the fascination of
Fuel Cells.
E D U C A T I O N
-
D E M O N S T R A T I O N
-
P U B L I C
R E L A T I O N
21.09.2007 13:12:36 Uhr
S T A C K
E X P E R I M E N T A T I O N
Teaching Fuel Cell Technology.
Holder Set (included in 2095-4)
1950
FuelCellMonitor 3.0
External measuring transformer card for
measuring and recording the characteristics
of h-tec fuel cell models. Connects to a PC
via USB cable. Supplied software allows you
to plot for fuel cell stacks voltage-current,
power-voltage, power-current, power-time
characteristics and the voltage of each single
cell of the stack. Recording can be done automatically, at certain voltage or current points
or manually. For electrolysers you can plot the
voltage-current characteristic. Data recording
as .txt or .csv format. Minimum system
requirements: PC with Windows 2000 SP3, XP
or Vista, 580 MB free space on HD, Pentium III
or comparable (600 MHz - or faster), USB port.
Recommended: MS Excel (for individualized
data plotting) Package includes: measuring
transformer card, USB cable, software, set of
cables, power supply.
2095-4
StackExperimentationSet
Specifications
Fuel Cell mode
Power:
Pmax = 10 W
U = 0 - 10 VDC
I=0-5A
Electrolyser mode Pmax = 10 W
Power:
U = 0 - 4 VDC
I=0-3A
Ports:
Monitoring cable:
USB Cable:
H x W x D:
Weight:
2 mm and 4 mm
50 cm
180 cm A/B
40 x 160 x 100 mm
235 g
Fuel cell experimentation system in a sturdy
carrying case, consisting of PEM Fuel Cell
Stack 10 (ten cells), Electrolyser 65, PowerSupply 15, measuring transformer card Fuel Cell
Monitor, hydrogen storage tank Storage 80,
electric load Experimentation Set Lamp, Fan,
Solar Module 13 and magnetic vertical holding
system Holder Set.
In addition the following accessories are
included: water bottle (with distilled water),
protective goggles, silicon tube, textbook.
Specifications
Electrolyser:
15 W
Fuel Cell Stack
Power per cell:
200 mW
Power (10 cells): 2 W
Solar module:
4.0 V / 3.3 A
Gas storage:
80 cm3
Electric load lamp: 4.4 W
Power supply:
5.0 VDC / 3.0 A
Fuel Cell Monitor
Please find the details and specifications in
the Fuel Cell Monitor 3.0 product describtion.
H x W x D:
510 x 420 x 210 mm
Weight:
10.3 kg
To see our complete product range and get further details on our company, please visit our site on the Internet at www.h-tec.com. Technical details and components are subject to change without notice. Printing errors reserved.
Messeflyer Kopie.indd 2
T U T O R I A L
P R O D U C T
R A N G E
New fuel for thought in your classroom.
T102
TutorialStudentSet
+
T103
TutorialTeacherSet
Features:
Additional to
Tutorial Student Set:
- Latest Fuel Cell technology
- Modular set-up through
magnetic holders
- Teaching folder with set-up
templates
- Textbook
Complete solar hydrogen system in a carrying
case, consisting of Solar Module Tutorial,
reversible fuel cell RFC H2/O2/Air for production
of hydrogen and oxygen, PEM Electrolyser
Cell 5 for hydrogen and oxygen production, two
hydrogen/oxygen storage tanks for electrolyser- and reversible systems, Fan Tutorial and
car application as electric load, experimentation plate, PowerSupply, Battery Box, connector
cables, silicon tube, and 250 ml distilled water.
Solar cells, fuel cells, gas storage tanks and
fan are equipped with a magnetic film and can
be combined for numerous experiments such
as solar car, hydrogen production in a solar
hydrogen gas station, air-breathing fuel cell
car, solar hydrogen system and reversible fuel
cell system. Comprehensive didactical material
included.
- Fully-functional Fuel Cell
for assembly demonstration
- Direct Methanol Fuel Cell
Technology
Specifications
3
Electrolyser Cell 5: 5 cm /min H2;
2.5 cm3/min O2;
1.16 W
RFC H2/O2/Air
H2/O2 mode:
500 mW
H2/Air mode:
150 mW
Gas storage:
Solar module:
Battery Box:
Power supply:
Load (fan):
Load (car):
Cable length:
H x W x D:
Weight:
30 cm3 H2; 30 cm3 O2
2.0 V / 600 mA
4.5 VDC / 0.8 A
1.2 A
10 mW
150 mW
250 mm
140 x 450 x 380 mm
3.5 kg
Complete solar hydrogen system in a carrying
case, consisting of Solar Module Tutorial,
reversible fuel cell RFC H2/O2/Air for production
of hydrogen and oxygen, PEM Electrolyser
Cell 5 for hydrogen and oxygen production,
PEM fuel cell PEMFC Kit that can be completely
disassembled for hydrogen/oxygen or hydrogen/air operation, Direct Methanol Fuel Cell
with built-in methanol tank (operated with 3 %
of methanol-in-distilled water solution), two
hydrogen/oxygen storage tanks for electrolyserand reversible systems, Fan Tutorial and car
application as electric load, experimentation
plate, PowerSupply, Battery Box, connector
cables, silicon tube and 250 ml distilled water.
Solar cells, fuel cells, gas storage tanks and fan
are equipped with a magnetic film and can be
combined for numerous experiments such as
solar car, hydrogen production in a solar-hydrogen gas station, air-breathing fuel cell car, solar
hydrogen system, reversible fuel cell system,
dismountable fuel cell and methanol system.
Comprehensive didactical material included.
Methanol solution is included for products
delivered within Europe.
Specifications
Electrolyser Cell 5: 5 cm3/min H2;
2.5 cm3/min O2;
1.16 W
RFC H2/O2/Air
H2/O2 mode:
500 mW
H2/Air mode:
150 mW
PEMFC Kit
H2/O2 mode:
600 mW
H2/Air mode:
200 mW
Methanol Fuel Cell
Power:
10 mW
Gas storage:
Solar module:
Battery Box:
Power supply:
Load (fan):
Load (car):
Cable length:
H x W x D:
Weight:
30 cm3 H2; 30 cm3 O2
2.0 V / 600 mA
4.5 VDC / 0.8 A
1.2 A
10 mW
150 mW
250 mm
140 x 450 x 380 mm
3.9 kg
Variety of possibilities:
Solar Hydrogen System
Electrolyser Mode: Hydrogen
Production
Fuel Cell Mode: Electricity
from Hydrogen
Solar Hydrogen Gas Station &
Fuel Cell Car
To see our complete product range and get further details on our company, please visit our site on the Internet at www.h-tec.com. Technical details and components are subject to change without notice. Printing errors reserved.
S O L A R
H Y D R O G E N
S TA R T E R
S E T
Introduction to Fuel Cell Technology.
T101
Modular solar hydrogen system consisting of
reversible fuel cell RFC H2/O2/Air, two gas storage tanks and black base plate; for production,
storage and utilization of hydrogen and oxygen.
Operation as air-breathing fuel cell is possible as
well. Fan Tutorial, Solar Module Tutorial, Battery
Box and textbook included.
TutorialRFCSet
Air-breathing Set-up
Specifications
Solar Hydrogen Production
Electrolyser mode: 5 cm3/min H2;
2.5 cm3/min O2; 1.16 W
Fuel cell mode:
H2/O2: 500 mW
H2/Air: 150 mW
Gas storage:
30 cm3 H2; 30 cm3 O2
Solar module:
2.0 V / 600 mA
Battery Box:
4.5 VDC / 0.8 A
Fan:
10 mW
Cable length:
250 mm
H x W x D:
90 x 170 x 135 mm
Weight:
1.1 kg
SOL AR HYDROGEN AUTOMOTIVE SET
The future of automobiles.
T107
This model of a hydrogen car is equipped with a
reversible fuel cell with which the car can produce its own hydrogen when an external voltage
is applied. Charging time: approx. 2 min. with
PowerSupply, approx. 7 min. with Battery Box
and approx. 9 min. with Solar Module Tutorial
under sunlight. Running time approx. 8 min.
PowerSupply, Battery Box, Solar Module Tutorial
and textbook included.
TutorialHyRunner
Specifications
Electrolyser mode: 5 cm3/min H2;
2.5 cm3/min O2; 1.16 W
Fuel cell mode:
H2/O2: 500 mW
H2/Air: 150 mW
Gas storage:
30 cm3 H2 / 30 cm3 O2
Solar module:
2.0 V / 600 mA
Battery Box:
4.5 VDC / 0.8 A
Power supply:
1.2 A
H x W x D:
100 x 115 x 260 mm
Weight:
1.3 kg
Solar Car
Modular System
Electrolyser Mode: Hydrogen Production
To see our complete product range and get further details on our company, please visit our site on the Internet at www.h-tec.com. Technical details and components are subject to change without notice. Printing errors reserved.
Messeflyer Kopie.indd 1
F U E L
C E L L S
&
E L E C T R O L Y S E R S
The perfect complement.
F103
FuelCell H2/O2/Air
R104
Double RFC H2/O2/Air
PEM fuel cell for hydrogen/oxygen operation and
hydrogen/air operation.
Reversible double-cell PEM fuel cell for production of hydrogen and oxygen (electrolyser mode)
and for utilization of hydrogen and oxygen or
hydrogen and air (fuel cell mode).
Specifications
Fuel cell
Fuel cell H2/Air:
H x W x D:
Weight:
H2/O2: 500 mW
150 mW
50 x 40 x 50 mm
52 g
Specifications
Electrolyser mode:
Fuel cell mode (O2):
Fuel cell mode (Air):
H x W x D:
Weight:
R105
Quattro RFC H2/O2/Air
2090-10
10 cm3/min H2;
5 cm3/min O2;
2.33 W
1W
300 mW
56 x 42 x 57 mm
63 g
FuelCellStack 10
Fuel cell stack, easy mounting and demounting of cells. The stack will be delivered fully
assembled. Allows voltages between individual
cells to be measured.
Recommended hydrogen supply: Electrolyser 65.
Powerful reversible PEM fuel cell stack (4 cells)
for production of hydrogen and oxygen (electrolyser mode) and for utilization of hydrogen and
oxygen or hydrogen and air (fuel cell mode).
Specifications
Electrolyser mode:
Fuel cell mode (O2):
Fuel cell mode (Air):
H x W x D:
Weight:
2115
Specifications
20 cm3/min H2;
10 cm3/min O2;
4.66 W
2W
600 mW
62 x 60 x 62 mm
78 g
MethanolFuelCell
Power per cell:
Power (10 cells):
H x W x D:
Weight:
E102
Direct methanol fuel cell with built-in methanol
tank. Operated with 3% of methanol-in-distilled
water solution. Methanol solution is included for
products delivered within Europe.
3011
Electrolyser 10
Double-cell PEM electrolyser with water tanks,
hydrogen and oxygen storage tanks, mounted on
a black base plate, for production and storage of
hydrogen and oxygen.
Specifications
Power:
H x W x D:
Weight:
200 mW
2W
60 x 175 x 70 mm
430 g
Specifications
10 mW
50 x 50 x 40 mm
60 g
Electrolyser 65
Hydrogen production:
Oxygen production:
Power:
Gas storage:
H x W x D:
Weight:
3017
Double-cell PEM electrolyser stack for production
of hydrogen from distilled water.
Specifications
Hydrogen production:
Power:
H x W x D:
Weight:
10 cm3/min
5 cm3/min
2.33 W
30 cm3 H2, 30 cm3 O2
200 x 180 x 120 mm
500 g
Electrolyser 230
Seven-cell PEM electrolyser stack for production
of hydrogen from distilled water.
Specifications
65 cm3/min
15 W
140 x 180 x 120 mm
460 g
Hydrogen production:
Power:
H x W x D:
Weight:
230 cm3/min
50 W
190 x 264 x 200 mm
1.5 kg
To see our complete product range and get further details on our company, please visit our site on the Internet at www.h-tec.com. Technical details and components are subject to change without notice. Printing errors reserved.
21.09.2007 13:13:22 Uhr
P E M F C
K I T
Discover the core.
1919
PEM fuel cell that can be completely disassembled, specially designed for education.
Hydrogen/oxygen or hydrogen/air operation.
Tools needed for assembly are included.
PEMFC Kit
Specifications
Fuel cell H2/O2:
Fuel cell H2/Air:
H x W x D:
Weight:
600 mW
200 mW
56 x 42 x 50 mm
60 g
M E D I A
Learn about Fuel Cells.
2065
MediaPack
2066
12 Fuel Cell transparencies, 1 Innovation Fuel
Cell poster and CD-ROM. The Fuel Cell transparencies and the CD-ROM cover the topics fuel
cell, hydrogen technology and renewable energy.
FuelCellBook
Comprehensive introduction to solar hydrogen
and fuel cell technology. Lab manual for student
experiments on solar cells, electrolysis and fuel
cells. Work sheets for students and teachers,
master copies. 2nd edition - March 2007
Specifications
Poster
H x W:
Specifications
594 x 420 mm (DIN A2)
Transparencies
H x W:
297 x 210 mm (DIN A4)
Title:
Fuel Cell Technology
for Classroom Instruction
H x W:
170 x 220 mm
Pages:
122, with many illustrations
Language: German or English
Downloadable Fuel Cell Knowledge for free: www.h-tec.com
Work Sheets, Transparencies, Experiments, Animated Graphics, Instruction Manuals, Glossary and much more…
Hydrogen Energy Systems
Lindenstrasse 48a
23558 Luebeck
Germany
Phone:
Fax:
e-mail:
website:
+49 (0) 451-49 89 5-0
+49 (0) 451-49 89 5-15
info@h-tec.com
www.h-tec.com