Industrial Products
Typical Terminal Styles.............................................................................................................................................. S-2
Quick Disconnects.................................................................................................................................................... S-3
Specialty Connectors................................................................................................................................................ S-4
Commercial Micro-D Connector................................................................................................................................... S-5
Beau® Terminal Blocks
Eurostyle™
Pluggable..............................................................................................................................................S-6 to S-8
Headers......................................................................................................................................................... S-8
Terminal Strips................................................................................................................................................ S-9
Barrier Strips..............................................................................................................................................S-10 to S-11
Beauplug® Plugs and Sockets.................................................................................................................................. S-12
MX150L™ Sealed Connector System.............................................................................................................S-13 to S-14
Molded Cordsets.................................................................................................................................................... S-15
Hard Shell Circular Connectors.................................................................................................................................. S-16
Heavy-Duty Rectangular Industrial Connectors
HMC™. .....................................................................................................................................................S-17 to S-22
Mini-HMC™................................................................................................................................................S-23 to S-25
MTC™. .....................................................................................................................................................S-26 to S-28
Wire Management Products..................................................................................................................................... S-28
MagKrimp™ Magnet Wire Splice............................................................................................................................... S-29
Wire Splice Terminal............................................................................................................................................... S-29
www.molex.com
S
Typical Styles
Standard Ring Tongue
The ring tongue terminal is the safest and most reliable
style because it cannot be disconnected unless the screw is
completely removed.
The basic Molex barrel, called Krimptite®, is noninsulated
and features a quality, one-piece design. It is also the most
economical style and has the greatest variety of uses where
special features are not required.
The InsulKrimp® version features a rigid insulation sleeve
of PVC affixed to the Krimptite barrel or the brazed-seam
VersaKrimp™ barrel. It attaches to the wire with one quick
crimp and the insulation sleeve protects against vibration
damage by preventing wire flex at the crimp point. The
funnel entrance into the barrel eliminates wire strand
“fold back,” increases crimping rates and enhances wire
termination reliability.
into the barrel that eliminates wire strand “fold back,”
increases crimping rates and enhances wire termination.
When the butted-seam Krimptite barrel is bonded with a
special brazing alloy, it becomes a VersaKrimp barrel. These
brazed-seam barrel terminals will not open under conditions
of stress or wire pull. As versatile as it is tough, it can be
crimped under most adverse conditions by many types of
tooling. The VersaKrimp is ideal for hard-to-crimp solid and
stranded wires.
AviKrimp® terminals with color-coded barrels offer you the
ultimate in high-performance terminal design and rugged
construction. The Tin-plated Brass sleeve strengthens the
barrel and secures the wire to protect against stress and high
vibration. The color-coded nylon insulating sleeve extends
beyond the metal support sleeve. A funnel ferrule wire
entrance into the barrel prevents wire strand “fold back”
for increased crimping rates and added wire termination
reliability in the standard barrel length.
The NylaKrimp® barrel was designed specifically for larger
wire applications. The color-coded barrel is formed by
affixing a permanent, rigid, color-coded nylon insulating
sleeve to the barrel. The insulation has a funnel entrance
Features
■ Material: Copper
■ Available in wire ranges from 24 to 26 AWG to 4/0
■ All parts available loose piece; some are also available
on mylar tape carrier
AviKrimp
InsulKrimp
NylaKrimp
Krimptite
VersaKrimp
Splices
Molex offers standard and special splices for nearly every
type of wiring needed.
Industrial Products
Butt Splice
Stripped wires are inserted from each end and “butt” in the
center, then a crimp at each end secures the connection.
FS
Step Down Butt Splice
The perfect solution when two wires need to be inserted in
one end of a splice and a single wire in the other end.
Parallel Splice
Stripped wires lie side-by-side in the splice and are secured
by a single crimp in the middle.
AviKrimp Butt Splice
With the extra metal sleeve and nylon insulation, these
splices should be used when heavy vibration is anticipated
and a strong strain relief is needed.
Funnel Entry Butt Splice
With the funnel entry butt splice, the end that will be
crimped by the crimping press is funneled to allow quick
and easy wire insertion.
Window Butt Splice
The unique feature of this splice is the “window” that is
stamped into the copper splice and covered by nylon. The
inspection window guarantees proper wire insertion and
crimp tool alignment. QPL’d to Mil-T-7928/5
Note: T he connectors shown here are only a representation of our product line. For a complete listing of all solderless terminals and connectors,
please contact Molex Industrial Division at 1-800-800-0449, or at www.molex.com.
S-2 MX07
Multi-Lock
This is an insulation
displacement connector
that allows tap-and-run
connections. Using only
ordinary channel lock
pliers, these color-coded
connectors make quick,
reliable, preinsulated splices without having to strip, twist
or solder.
Nylon Closed End Connector
The nylon closed end connectors are used in a wide variety
of situations to “pigtail” or tie together two or more wires.
Wire Tap
The Wire Tap splices
onto a wire using an
insulation displacement
barb. No special tools
are required, simply
squeeze together with
pliers.
www.molex.com/product/sterm/
Quick Disconnects
Quick Disconnect Terminals
For PC Board
Molex offers a large selection of Standard Printed Circuit
Board Mountable quick disconnect terminals. Some products
offer a tab support mounting feature providing increased
mounting reliability and terminal strength. Products are
available as strip applied and loose piece. All products can
be easily inserted into printed circuit boards using widely
available, industry standard bench-type and fully-automated
XY insertion tooling.
Features
■ Material: Brass
■ Thickness: 0.81mm (.032")
■ Tab conforms to NEMA specifications
■ Plating: Tin 3.81mm (150m") min. thickness
Molex PC board Quick Disconnect terminals are available in
tab sizes ranging from 2.79 by 0.51mm (.110 by .020") to
6.35 by 0.81mm (.250 by .032"). Products are available in
both vertical and right angle mounting configurations. All
products are manufactured to NEMA specifications and are
UL and CSA recognized.
Fully-Insulated Quick Disconnects
Features
■ Meets UL 310 standards (listed under UL File
No. E79133)
■ Color coded translucent insulator allows easy
identification of terminal size and wire gauge
■ Funnel entrance designed for increased crimping rates
by speeding wire delivery into crimp section and
eliminating wire strand fold back
■ Wire stop stamped into the crimp barrel prevents
insertion of over-stripped wire
Features
■ Same functions as a standard piggyback terminal with
the added feature of being fully insulated with a rigid
nylon housing
■ Also available in expanded flare versions
■ Available in InsulKrimp (single crimp) or AviKrimp
(double crimp) style
Tape-fed And Loose-piece
Quick Disconnects
These non-insulated and partially insulated quick disconnects
are available either loose piece or tape-mounted. Loose
piece versions are individually fed into the dies of manual
and powered hand crimping tools. Tape-fed versions are
the same terminals mounted on mylar tape for automatic
feeding into air- or electric-powered bench crimping presses.
metal support sleeve, and fulfills double crimp (support)
requirements of VDE and DIN specifications
■ The right angle flag terminal provides space saving
design
■ All parts available as loose piece; most are also available
on either mylar tape, metal strip, and/or continuous
molded carrier
■ Some parts meet the UL 94V-0 flammability rating
Industrial Products
Fully-Insulated Piggyback
Quick Disconnects
■ AviKrimp version has extra advantage of the secure
Tape-fed terminals are ideal for applications where there
are too many terminals for hand tool crimping and too
few for strip press crimping. All loose piece and tape-fed
terminals have a fully Tin-plated Brass construction with
closed electrical barrels.
Parts are available in the following styles: Krimptite (butted
seam), InsulKrimp (PVC insulated), and AviKrimp (nylon
insulated with vibration support).
Note: The connectors shown here are only a representation of our product
line. For a complete listing of all solderless terminals and connectors,
please contact Molex Industrial Division at 1-800-800-0449, or at
www.molex.com.
www.molex.com/product/sterm/
MX07 S-3
S
Specialty Connectors
Perma-Seal™ Terminals and Splices
Perma-Seal terminals and splices provide a rugged,
environmentally sealed connection for wire sizes 8 to
22 AWG that will insulate, seal and protect joints from
physical abuse and abrasion, water, salt and other corrosive
compounds.
The tough insulation sleeve of Perma-Seal splices and
terminals resists abrasion and cutting. This protection helps
to maintain the insulation and sealing properties even in the
most hostile environments, inside and out.
Industrial Products
These terminals give you long-lasting, moisture-proof
connections that withstand water, salt, corrosion and heat, all
of which cause serious problems for conventional, unsealed
splices. The inner wall of the heat-shrinkable insulation
sleeve is lined with a special hot-melt adhesive that is inert
at room temperature, permitting wires to be inserted easily
into the splices and terminals. As the sleeve is heated, the
adhesive melts and flows under pressure from the tubing.
This action creates a voidless seal that repels moisture
incursion even during pressure cycling, and stands up to
some of the most rigorous tests that can be applied to highperformance splices, such as the salt fog test MIL-T-7928.
Heavy-Duty Copper Lugs and
Splices
Our heavy-duty closed end crimpable terminals are
designed for electrical and industrial applications such as
welding equipment, forklifts, generators, power distribution
equipment, motors, etc. They are manufactured of pure
electrolytic copper, and are available in 8 AWG through
4/0 AWG wire and cable with a variety of stud sizes.
Star Ring Terminals
The Star Ring is a serrated ring that is mainly used for
grounding. Unlike a ring terminal, when you tighten down
on a star ring, the “star blades,” or serrated edges, actually
pierce through paint or other coatings, and bite into the
metal to insure a good connection or ground. The product
may also eliminate the need for lock washers.
Features
■ Rated to 35KV applications
■ UL listed, CSA certified
■ Crimps in industry standard tooling
■ Seamless barrel design
■ Can be easily soldered or crimped
■ Flared barrel entry for easy wire insertion
■ AWG wire size identification on barrel
■ Made of CDA-110 Copper stock offering
100% conductivity
Features
■ Material: Brass or Steel
■ Non-insulated, PVC insulated, or nylon insulated
■ Wire ranges from 18 to 22 AWG and 14 to 16 AWG
FS
Note: T he connectors shown here are only a representation of our product line. For a complete listing of all solderless terminals and connectors,
please contact Molex Industrial Division at 1-800-800-0449, or at www.molex.com.
S-4 MX07
www.molex.com/product/sterm/
Commercial Micro-D
Connector
This commercial line of shielded Micro-D products with a
1.27mm (.050") pitch, offers an economical solution for
commercial and industrial applications that require the
density of a microminiature connector. The series is available
in a right angle and vertical configuration, designed with a
metal interface and grounding tabs for improved mechanical
and electrical shield connection.
Also available is the cable receptacle, which has a “crimp
and poke” configuration designed for hand or semiautomatic crimping. Our unique backshell design will
maintain the integrity of the cable construction while the
strain relief is crimped over the cable.
Applications
■ Commercial
■ Computer I/O
■ Data storage
■ Telecomunications
■ Industrial
Industrial Products
A wide variety of pre-made over-moulded cable assemblies
are also available. Configurations include single-ended
and double-end CMD, as well as CMD to standard D-sub
connectors in 9, 15 and 25 circuit densities.
Features
■ Right angle plug available in 9, 15, 18, 25 and
50 circuits
■ Vertical plug available in 9, 15 and 25 circuits
■ Cable receptacle available in 9, 15 and 25 circuits
■ LCP insulator, stamped metal shell
■ Crimp and poke contacts on the cable receptacle for
customer termination
■ Current: 1.0A max.
■ UL File No: E34763
S
www.molex.com/product/commercial_micro_d.html
MX07 S-5
Beau® Eurostyle™
PCB Terminal Blocks
Fixed, One Piece or
Pluggable, Two Piece
Features and Benefits
■ Rising cage clamp termination provides a secure
connection without strand damage or intermittence
■ High-power terminal blocks available in both fixed or
pluggable configurations
■ Pitch sizes range from 3.50mm (.138") to
15.00mm (.591")
■ Industry standard interface
Molex manufactures a wide variety of Eurostyle
■ Various imprinting styles available making wiring and
terminal blocks to fit your connector needs.
repair faster and easier in the field
Whether you need a fixed, single-piece solution, or a
■ Optional mounting ends ensure plugs maintain
pluggable, two-piece combination, Eurostyle terminal blocks
connection with PCB headers
from Molex provide a quality connection every time.
■ Current ratings ranging from 10.0A to 115.0A
Beau Eurostyle terminal blocks are available from 3.50mm ■ Some PCB headers available as surface mount
(.138") pitch to 15.00mm (.591") pitch, with current ratings
compatible
■ RoHS and ELV Compliant
ranging from 10.0A to 115.0A per circuit. Choose a small
■ UL recognized and CSA approved
pitch spacing to conserve space where PCB real estate is
limited. Or, select one of our 600V blocks for high power
applications. The range of styles, configurations, pitches and
ratings makes it easy for you to find the right connector for
your design.
Plugs
Features and Benefits
■ Rising cage clamp wire termination provides secure,
reliable contact
■ Industry standard interface for compatibility with
existing baord layouts
■ Made from self-extinguishing nylon material, UL 94 V-0
flammability rating
Circuits
2-12
2-24
2-21
2-20
Series
39371
39374
39860
39870
39900
39351
Industrial Products
Headers
FS
Circuits
2-12
2-24
2-21
2-20
S-6 MX07
Pitch
7.50 (.295)
5.08 (.200)
5.00 (.197)
3.81 (.150)
3.50 (.138)
Orientation
Horizontal
Vertical
Current
Horizontal and Vertical
15.0A
Vertical
Horizontal
12.0A
10.0A
Pitch
7.50 (.295)
5.08 (.200)
5.00 (.197)
3.81 (.150)
3.50 (.138)
Voltage
Wire Range (AWG)
12.0A
Features and Benefits
■ Surface Mount Compatible headers available in 5.00 and
5.08mm (.197 and .200")
■ Industry standard interface for compatibility with
existing baord layouts
■ Made from self-extinguishing nylon material, UL 94 V-0
flammability rating
Series
39373
39372
39860
39870
39900
39355, 39353
Reference Information
UL File No.: E48521
UL Guide No.: XCFR2
CSA File No.: 025562
Orientation
Horizontal
Vertical
14-30
300V
12-26
Yes
16-26
16-24
Reference Information
UL File No.: E48521
UL Guide No.: XCFR2
CSA File No.: 025562
Current
Voltage
Lead-free
300V
Yes
12.0A
15.0A
Horizontal and Vertical
Lead-free
12.0A
10.0A
www.molex.com/product/tblocks.html
Beau® Eurostyle™
PCB Terminal Blocks
Fixed Terminal Blocks
Features and Benefits
■ Low-profile versions available on some blocks, which are
ideal for density-sensitive applications
■ Rising cage clamp wire termination provides secure,
reliable contact
■ Made from self-extinguishing nylon material, UL 94 V-0
flammability rating
Reference Information
UL File No.: E48521
UL Guide No.: XCFR2
CSA File No.: 025562
Single Level
Circuits
2-3
2-24
Series
39390
39380
39880
39890
39850
Pitch
9.52 (.375)
6.35 (.250)
5.08 (.200)
5.00 (.197)
5.00 (.197)
Multi-level (Fixed) Blocks
Orientation
Current
Voltage
Wire Range (AWG)
Vertical
30.0A
150V
10-30
Horizontal and Vertical
15.0A
300V
12-30
Horizontal, Vertical, 45˚
20.0A
250V
12-22
Features and Benefits
■ Modular design allows larger circuit sizes to be created
by stacking smaller circuit parts together, which reduces
inventory
■ Rising cage clamp wire termination provides secure,
reliable contact
■ Two and three level parts have staggered rows to make
accessing wires easier
Lead-free
Yes
Reference Information
UL File No.: E167473
CSA File No.: LR102896
Multi-Level
Series
Pitch
39890
5.00 (.197)
39880
5.08 (.200)
4-48
39890
5.00 (.197)
39880
5.08 (.200)
6-72
Profile
Low
Medium
Low
Medium
High
Low
Medium
Low
Medium
High
Levels
2
3
Current
13.5A
17.5A
13.5A
17.5A
24.0A
13.5A
17.5A
13.5A
17.5A
24.0A
Voltage
Wire Range (AWG)
16-30
12-30
16-30
Lead-free
12-30
150V
16-30
12-30
16-30
Yes
12-30
Industrial Products
Circuits
S
www.molex.com/product/tblocks.html
MX07 S-7
Beau® Eurostyle™
PCB Terminal Blocks
High-Power Terminal Blocks
Features and Benefits
Reference Information
■ Rising cage clamp wire termination provides secure,
UL File No.: E167473
CSA File No.: LR102896
reliable contact
■ Multiple PCB terminals distribute power more evenly,
reducing “hot spots”
■ Combination slotted/posi drive screw heads improve
transmission of torque for superior wire retention
■ Extended wire funnel entry surrounds the wire insulator,
eliminating exposed wire strands and possible shorting
Fixed High-Power
Circuits
2-14
2-12
3-16
3-12
2-12
Series
39910
39920
39950
39960
39970
Pitch
10.16 (.400)
15.00 (.591)
8.00 (.315)
8.00 (.315)
10.16 (.400)
Series
39421
Pitch
12.00 (.472)
Orientation
Voltage
Horizontal and Vertical
Vertical
Current
60.0/40.0A
85.0/115.0A
20.0A
30.0A
60.0/40.0A
Orientation
Horizontal
Current
85.0A
Vertical
Lead-free
300V
Wire Range (AWG)
6-18
3-14/1-8
12-22
10-22
6-18
Voltage
600V
Wire Range (AWG)
3-14
Lead-free
Yes
600V
Yes
Pluggable High-Power
Plug
Circuits
2-10
Header
Circuits
2-10
Series
39425
Pitch
12.00 (.472)
Industrial Products
Pluggable Euromate™
Circuits
3-21
3-24
Orientation
Horizontal
Current
85.0A
Features and Benefits
■ Wiring terminals are staggered and offset vertically to
facilitate easier wiring access
■ Rear barrier prevents over-insertion of wire into device
■ Accepts 6.35mm (.250") ring and spade wiring terminals
Series
39930
39940
Pitch
3.81 (.138)
5.08 (.200)
Orientation
Lead-free
Yes
Reference Information
UL File No.: E48521
UL Guide No.: XCFR2
CSA File No.: 025562
Current
12.0A
15.0A
Vertical
Voltage
600V
Voltage
300V
Wire Range (AWG)
14-22
12-22
Lead-free
Yes
* Mates with most 3.81 and 5.08mm (.138 and .200") pitch headers.
Positive Locking Plugs and Headers
FS
Features and Benefits
■ Polarization feature eliminates the potential for
mismating
■ Low-profile Eurostyle plug
■ Positive latching system resists vibration and wire loads
■ Surface Mount Compatible headers can withstand reflow
soldering temperatures, elminiating the need for a
secondary wave soldering operation
■ Rising cage clamp or spring clamp wire termination are
interchangeable without having to change the board layout
(39990 only available with screw or rising cage clamp)
Reference Information
UL File No.: E48521
UL Guide No.: XCFR2
CSA File No.: 025562
Plugs
Circuits
2-24
2-20
2-18
Series
Pitch
39980
5.08 (.200)
39990
5.00 (.197)
Orientation
Vertical (Screw Clamp)
Vertical (Spring Clamp)
Vertical (Screw Clamp)
Current
Voltage
10.0A
300V
Wire Range (AWG)
12-24
14-24
12-26
Lead-free
Yes
Headers
Circuits
2-24
2-18
S-8 MX07
Series
39980
39990
Pitch
5.08 (.200)
5.00 (.197)
Orientation
Current
Voltage
Lead-free
Vertical
10.0A
300V
Yes
www.molex.com/product/tblocks.html
Beau® Eurostyle™
PCB Terminal Blocks
Eurostyle Two-Screw
Terminal Strips
Circuits
2-12
Features and Benefits
■ Modular design allows larger blocks to be easily cut into
smaller circuit sizes
■ Contacts and screws are recessed in the housing to help
prevent short circuits
■ Wire protectors prevent stranded wire damage during
connection
Series
39100-08XX
39100-10XX
39100-12XX
39100-15XX
Pitch
8.00 (.315)
10.00 (.394)
12.00 (.472)
15.00 (.591)
Current
20.0A
30.0A
40.0A
63.0A
Voltage
300V
600V
Wire Range (AWG)
12-22
10-18
8-20
6-14
Description
Lead-free
Standard profile,
with standoffs
Yes
All Two-Screw Terminal Strips available without standoffs (low profile)
Jumpers available in 2 or 3 circuit lengths
Fixed, One Piece or
Pluggable, Two Piece
Features
■ Rated 300V, 8.0A to 15.0A
■ Pitch sizes 3.50mm (.138") to 5.08mm (.200")
■ Rising cage clamp termination provides a reliable
The ESE line of Eurostyle® PCB terminal blocks
connection without strand damage or intermittance
from Molex provides an extensive range of
■ Standard or reverse imprinting available (1, 2, 3 or
options to meet your terminal block needs
3, 2, 1)
ESE from Molex is a line of Eurostyle PCB terminal blocks
■ Black or green housing standard
that simplifies the task of fulfilling your design requirements
■ All ESE terminal blocks rated UL 94V-0
by offering a wide variety of terminal blocks to choose
■ RoHS and ELV compliant
from. This line includes pitch sizes from 3.50mm (.138")
■ UL recognized and CSA approved
to 5.08mm (.200") and all are rated at 300V, from 8.0A
to 15.0A. Choose from fixed, single-piece blocks or from
pluggable, two-piece blocks.
All ESE Eurostyle PCB terminal blocks from Molex conform to
international standards, are RoHS compliant, UL recognized
and CSA certified. You can count on the reliability of
terminal blocks from Molex.
Circuits
2-20
2-24, 4-48*
2-24
ESE Series Range
39500 to 39509
39510 to 39519
39520 to 39529
39530 to 39539
39543 and 39593
39544 and 39594
Type
Pluggable
Fixed
Pitch
3.50 (.138)
3.81 (.150)
5.00 (.197)
5.08 (.200)
5.00 (.197)
5.08 (.200)
Current
Lead-free
8.0A
15.0A
Yes
10.0A, 15.0A
15.0A
S
*4-48 circuit sizes are for dual-level PCB headers, available in 5.08 and 5.00mm (.200 and .197").
www.molex.com/product/tblocks.html
Industrial Products
All of the ESE terminal blocks are offered in both black
and green, and can be ordered with two optional styles of
imprinting to aid in wiring, testing or repair in the field. For
added durability and connectivity, any of the ESE pluggable
terminal blocks are available with gold-plated contacts.
MX07 S-9
Beau®
Barrier Strips
Features
■ Optional topside hardware allows for further
customization to fit your design requirements
■ Robust and durable screw terminals are ultrasonically
Beau terminal blocks provide a robust connection
welded into the thermoplastic insulator, reducing the risk
between wires and the PCB.
for terminal twisting and solder joint failure
Beau terminal blocks are a great connector for their
■ Tri-barrier construction of some barrier strips provides a
durability and versatility. Barrier strips can handle currents
back wall to prevent over insertion and shorting
of up to 45.0A per circuit and all are rated for 300 or 600V. ■ No special tools required to terminate wires, only a No. 2
With the variety of terminal styles, screws and other options
screwdriver required
available on barrier strips, these parts can be customized in ■ Broad range of screw and terminal options improves
many ways.
interconnect performance
■
Various imprinting styles aid in labeling circuits for
Special additions to barrier strips such as topside hardware,
wiring, testing and repair in the field
marker strips and hinged covers ensure that you get the
■ UL recognized and CSA approved
best possible connector designed specifically for your
■ RoHS and ELV compliant
application.
Industrial Products
Barrier Terminal Strips
Features and Benefits
■ Robust and durable welded construction
■ Wide variety of screw and terminal options
■ Molded to exact length, no unsightly saw cuts
Reference Information
UL File No.: E48521
UL Guide No.: XCFR2
CSA File No.: 025562
Screw Only
Insulated Solder
Insulated PC
Centerline PC
Solder Turret
Centerline
Wire Wrap
Centerline
Right Angle PC
Insulated Fast On
Offset PC
Offset Wire Wrap
Offset
Right Angle PC
All
38710
38720
38730
38710
38720
38730
38630
38710
38720
38730
38740
38630/38631
38710/38711
38720/38721
38730/38731
38631
38711
38721
38731
38711
38721
38731
38741
38711
38721
38731
38741
38700
38610
38701
38701
Circuits
2-16
2-30
2-26
2-30
2-32
Series
38630/38631
38700/38701
38710/38711
38720/38721
38730/38731/38732
38740/38741/38742
38610
Pitch
11.12 (.438)
8.25 (.325)
Current
25.0A
20.0A
9.52 (.375)
25.0A
11.12 (.438)
30.0A
6.35 (.250)
10.0A
Voltage
600V
300V
Wire Range AWG
12-24
12-22
12-24
Lead-free
Yes
10-24
300V
18-22
FS
S-10 MX07
www.molex.com/product/tblocks.html
Beau®
Barrier Strips
Single Row Tri-barrier
Terminal Strips
Features and Benefits
■ Robust and durable welded construction
■ Wide variety of screw and terminal options
■ Tri-barrier construction prevents shorting
Screw Only
Insulated Solder
Insulated PC
Centerline PC
Solder Turret
All
38720
38730
38720
38730
38630
38720
38730
38630
38720
38730
38631
38721
38731
Circuits
2-32
2-15
2-30
2-26
2-16
2-12
2-16
2-12
Series
Centerline
Wire Wrap
Centerline
Right Angle PC
Insulated
Fast On
38631
38721
38731
38741
38721
38731
38721
38731
Pitch
6.35 (.250)
12.70 (.500)
8.25 (.325)
9.52 (.375)
11.12 (.438)
8.25 (.325)
9.52 (.375)
11.12 (.438)
38600
38690/38691
38750/38751/38752
38634
38704/38705
38724/38725
38734/38735
Dual-level Barrier Terminal Strips
Reference Information
UL File No.: E48521
UL Guide No.: XCFR2
CSA File No.: 025562
Current
10.0A
45.0A
20.0A
Offset PC
38600
38660
38690
38700
38750
38704/38705
Voltage
300V
600V
300V
25.0A
Offset Wire
Wrap
38691
38701
38751
38704/38705
38691
Offset
Right Angle PC
38751
38704/38705
Wire Range AWG
18-22
8-18
12-22
Lead-free
12-24
Yes
600V
20.0A
25.0A
30.0A
Right Angle PC
300V
12-22
12-24
10-24
Voltage
300V
Wire Range AWG
12-22
Features and Benefits
■ Robust and durable welded construction
■ Low profile, high density
Reference Information
UL File No.: E48521
UL Guide No.: XCFR2
CSA File No.: 025562
Series
38706
Pitch
8.25 (.325)
Double Row Barrier Terminal Strips
Screw Terminal
One-Sided Solder
Current
20.0A
Features and Benefits
■ Wide variety of options
■ Snap-on covers
■ Robust and reliable
■ Closed bottom or feed-through
Two-Sided Solder
Short Solder
Lead-free
Yes
Reference Information
UL File No.: E48521
UL Guide No.: XCFR2
CSA File No.: 025562
Short PC
Long Solder
Long PC
Wire Wrap
Industrial Products
Circuits
4-24
S
All
Circuits
2-26
2-12
2-30
2-15
38210
38760
38770
38210
38760
38770
Series
38210
38280
38760
38770
38780
38221
www.molex.com/product/tblocks.html
All
Pitch
14.30 (.563)
17.47 (.688)
9.52 (.375)
11.12 (.438)
14.30 (.563)
38760
38770
Current
30.0A
50.0A
38210
38760
38770
38780
Voltage
38760
38770
38780
Wire Range AWG
10-18
6-18
300V
20.0A
30.0A
38760
38770
38780
Lead-free
Yes
12-24
600V
MX07 S-11
Beauplug®
Power Connectors
Panel Mount Plugs and Sockets
Features and Benefits
■ Robust blade contacts resist damage from
improper mating
■ Large surface area of dual wipe female contact
produces maximum current capacity
■ No de-rating required—all circuits rated for full
current load
Angle Bracket
Less Angle Bracket
Flat Plate
Shallow Bracket
End Bracket
Snap C-Clip
Deep Bracket
Recessed Plate
38330 to 38336
38440 to 38442
38540 to 38544
38330 to 38336
38440 to 38442
38540 to 38544
38330 to 38336
38330 to 38336
38540 to 38544
38330 to 38336
38330 to 38336
38540 to 38544
38330 to 38336
38540 to 38544
38330 to 38336
Circuits
2-33
4-12
4-16
Series
38330 to 38336
38440 to 38442
38540 to 38544
Cable Mount Plugs and Sockets
Industrial Products
Reference Information
UL File No.: E34763
CSA File No.: 22156
Current
10.0A
15.0A
Features and Benefits
■ Robust blade contacts resist damage from
improper mating
■ Large surface area of dual wipe female contact
produces maximum current capacity
■ No de-rating required—all circuits rated for full
current load
Voltage
Lead-free
250V
Yes
Reference Information
UL File No.: E34763
CSA File No.: 22156
Blank Back Shell
Flared Hole End
Flared Hole Top
Cable Clamp End
Cable Clamp Top
38330
38330
38540
38330
38540
38330
38540
38330
38540
FS
Circuits
2-12
4-16
S-12 MX07
Series
38330 to 38336
38540 to 38544
Current
10.0A
15.0A
Voltage
Lead-free
250V
Yes
www.molex.com/product/tblocks.html
MX150L™ Sealed
Connector System
These innovative mat-sealed connectors are based upon the Tooling solutions include FineAdjust™ crimp press
1.50 and 2.50mm (.059 and .098") blade-type terminals. applicators for high-volume production, as well as hand
This design eliminates the need to purchase, handle and
tools for low-volume production and field repairs.
crimp individual wire seals to lower applied cost. The matseal design is a single silicone-based seal with individual
The pre-assembled, submersible MX150L is a high
wire openings and a seal cap to protect, securely retain and
performance connector system suitable for challenging,
provide strain relief to the seal. The cost-effective connector
rugged and harsh applications.
design features all-in-one plug and receptacle housings with
The MX150L sealed connector system is designed to meet
pre-assembled mat-wire and interfacial connector seals.
the need for a rugged, environmentally sealed connector
Integral Terminal Position Assurance (TPA) and optional
system supporting both low-level signal applications as
Connector Position Assurance (CPA) components eliminate
well as power applications up to 40.0A, from on-engine
time-consuming and costly assembly operations. Completing
automotive and marine applications to off-road construction the application is as simple as crimping the appropriate
equipment applications. The system is comprised of wire-to- terminal, inserting the crimped terminal lead and seating
wire, wire-to-panel and wire-to-board configurations.
the TPA to its final locked position. No additional components
are required.
Features and Benefits
■ Pre-assembled connector housings, seals, TPA
■ Audible and tactile clicks on insertion, extraction and
■ Integral, 2-way mat and interface seals designed and
mating feedback facilitates reliable mating and terminal
tested to IEC IP 67 exceeds “waterproof” demands as
loading and removal
a true sealed connector system tested under submersed
■ Unused circuits can be blocked using plastic seal plugs,
conditions in various fluids
■ Easy terminal insertion and extraction provides quick,
which facilitates flexibility of sealing unused circuits
without adding complexity to part numbers and
low-cost field repairs using common screwdriver, needle
customer inventory
nose pliers and terminal extraction tool
■ Integral locking latch with secondary, pre-loaded CPA
■ Protective mat-seal cap protects, securely retains and
option assures that connector system is properly latched.
provides strain relief to wire seal interface
CPA will not move to final locked position if connector is ■ Simple crimp, poke and plug application eliminates need
not latched. Confirms positive mating of connector
to crimp individual wire seals
components and mat-seal cap shipped in 1 piece
to provide applied labor and cost savings
■ Integral TPA assures that crimped terminal leads are
properly locked into connector (TPA will not seat into
final lock position and connector system will not latch
if terminal is not locked properly into position)
■ Conforms to UL 1977, which allows for a UL recognized
sealed connector system for use in data, signal, control
and power applications
■ Superior electrical and mechanical performance
capabilities surpass performance of most mature
competitive products in market
MX150L Sealed Connector Systems - Exploded View
Connector Position Assurance
(CPA) - Optional
Receptacle Connector
Industrial Products
Seal Cap
Mat Seal
Housing
Interface Seal
Plug Connector
Terminal Position
Assurance (TPA)
S
Terminal Position
Assurance (TPA)
Housing
Mat Seal
NOTE: A ll discrete components shown above for
both the receptacle and plug housings
are pre-assembled. Terminals are simply
crimped and poked into the housings.
No additional wire seals, wedge locks or
CPA locks are required.
www.molex.com/ind/mx150.html
Retainer Cap
Seal Cap
MX07 S-13
MX150L™
Product Overview
14 TO 22 AWG Wire-to-Wire, Panel Mount and PCB
19417
Male Terminal
14-22 AWG
19419
Plug
19420
Female Terminal
14-22 AWG
19418
Receptacle
19755
Sealed Ground Block
Vertical
19429
Panel Mount Plug
Through Hole Flange
19756
Sealed Ground Block
Right Angle
19429
Panel Mount Plug
Rear Mount Flange
19435
Panel Mount Plug
Sealed
19427
PCB Header Right Angle
with Flange
19427
PCB Header Right Angle
without Flange
19428
PCB Header Vertical
Low Profile
19428
PCB Header Vertical
Standard Profile
Industrial Products
8, 10 and 12 AWG Wire-to-Wire
19431
8, 10, 12 AWG
Male Terminal
19433
Plug
19434
8, 10, 12 AWG
Female Terminal
19432
Receptacle
FS
S-14 MX07
www.molex.com/ind/mx150.html
Molded Cordsets
Molex offers a full line of molded cordsets and mating
bulkhead receptacles for a wide variety of applications.
Designed for use with AC and DC sensor and control
devices, solenoid valves, limit switches, and other electrical
components, these cordsets offer a cost effective, easy-to-use
solution and they meet or exceed the demands of rugged
industrial environments. Molex cordsets and receptacles
conform to all applicable specifications for Mini, Micro and
Nano (Pico) style connectors.
Applications
■ Material Handling Equipment
■ Robotics
■ Test Equipment
■ Instrumentation
■ Factory Automation
■ Conveyer Systems
■ Food Processing Equipment
Mini-C™ Cordsets and Receptacles
Features
■ Spring loaded coupling ring for superior vibration and
shock resistance
■ Mating assurance indicator allows for visual assurance
of mated connector
■ Hooded socket contact provides excellent contact
durability
■ Large coupling ring for ease of mating in tight locations
■ O-ring seal provides NEMA 6P and IP67 seal
■ Available with rugged STOOW-A or SOOW-A cable
■ Available in 2 through 6 poles
■ 600V 16 AWG or 250V 18 AWG versions available
Large Mini-C Cordsets and Receptacles
Features
■ Hooded socket contact provides excellent contact
durability
■ Large coupling ring for ease of mating in tight locations
■ O-ring seal provides NEMA 6P and IP67 seal
■ Provided with rugged STOOW-A cable
■ Available in 9, 10 or 12 pole configurations
■ 600 Volt 16 AWG cable
Micro-C™ Cordsets and Receptacles
■ Available with PVC, PUR, or rubber jacketed cable
■ Available in 3 through 5 pole single (DC) key and
2 through 5 pole dual (AC) key
■ Fully-shielded connector options with shield connected to
coupling ring allows shielding through panel/chassis
■ Available with 22 AWG or 18 AWG conductors
Industrial Products
Features
■ Spring loaded coupling ring for superior vibration and
shock resistance
■ Mating assurance indicator allows for visual assurance of
mated connector
■ Large coupling ring for ease of mating in tight locations
■ O-ring seal provides NEMA 6P and IP67 seal
Nano-C Cordsets and Receptacles
Features
■ Available with threaded coupling or quick disconnect
“snap lock” coupling
■ PUR molded body for superior chemical and abrasion
resistance
■ O-Ring seal provides NEMA 6P and IP67 seal
■ Available in 3 pole 24 AWG or 4 pole 26 AWG
configurations
■ Gold plated contacts for superior conductivity
S
DeviceNet™ Cordsets and Receptacles
Features
■ Fully shielded cable conforms to ODVA specification
■ Full line of accessories including Terminating Caps and
■ Spring loaded coupling ring for superior vibration and
Tees (Passive, Diagnostic, Auxiliary Power, E-stop, and
Power Introduction Tees)
shock resistance
■ Mating assurance indicator allows for visual assurance of ■ Cordsets available with Thick (Trunk) or Thin (Drop)
cable
mated connector
■ Large coupling ring for ease of mating in tight locations ■ Receptacles available with cable, discrete leads or solder
■ O-ring seal provides NEMA 6P and IP67 seal
cup contacts
www.molex.com/product/indust/
MX07 S-15
Hard Shell Circular Connectors
Mil-C Backshells
The Molex Mil-C line of backshells provide an alternative
to the standard backshell offerings of Mil-Spec connector
manufacturers. They will mate to most Mil-Spec circular
connectors, and are available in two configurations, a cable
backshell for use with a large range of cable types and sizes,
and a liquid tight backshell for use with type M liquid-tight
conduit.
Features
■ Patented seal design for NEMA 4 seal between backshell
and Mil-Spec connector
■ Cable backshell has patented garter spring design for
superior strain relief
■ Liquid tight backshell for 3/8, 1/2 or 3/4" metallic
liquid-tight conduit
■ Available with mating threads ranging from
5/8-24 UNEF through 1-3/4 19 UNS
Applications
■ Aerospace Ground Support Equipment
■ Machine Tools
■ Conveyer Systems
■ Construction Machinery
■ Welding Equipment
■ Industrial Control Equipment
Spirit™/Spectre™ Series
Industrial Products
Spirit and Spectre series connectors are metal shell circular
connectors that are a commercial replacement for higher
cost Mil-Spec circular connectors. They are available in
several sizes, contact configurations and backshell styles to
fit a wide variety of needs.
Features
■ Sealed diaphragms in insulator eliminate need for cavity
plugs
■ Spring loaded coupling for superior vibration and shock
resistance
■ ACME threads for two turn quick mate/unmate
■ Patented garter spring strain relief design
■ Fully modular design
■ Eight different clocking positions possible for each front
shell configuration
Applications
■ Machine Tools
■ Conveyer Systems
■ Material Handling Equipment
■ Welding Equipment
■ Truck and Bus Controls
■ Cranes and Hoists
FS
S-16 MX07
www.molex.com/product/indust/
Heavy-Duty Rectangular
Industrial Connectors
INTRODUCTION
Molex’s line of HMC heavy-duty rectangular industrial
connectors are designed for rugged applications such as
robotics, machinery equipment, transportation, power
generation and industrial controls. HMC provides an
innovative new approach to traditional heavy-duty
connections.
The HMC series includes some unique design features
such as: rugged metal cable-side hood with easy-to-actuate
“one-touch” lock; removable modular housing inserts that
can be custom configured; and various circuit and amperage
types to meet different power and signal needs.
Features
HMC™ Series
■ Unique rounded-shape metal hood with single-action
lock for space savings and easy handling
■ Easy field removal of modules
■ Cable-clamp solution that integrates sealed ring and
holder into one-piece cover
■ Single-module type enables housing inserts to be loaded
into either side
■ Multi-module type enables flexible module
configurations for hybrid application needs
12 circuits, 35.0/10.0A, IP65
40 circuits, 10.0A, IP65
52 circuits, 10.0A, IP65
36 circuits, 12.0A, IP65
48/72 circuits, 20.0/12.0A, IP65
36 circuits, 6.0A, IP54
Industrial Products
HMC Series—Module Type
S
www.molex.com/product/rectind/
MX07 S-17
Industrial Products
HMC™
12 circuits—35A/
10 circuits - IP65
10A/2 circuits
Connection System
FS
S-18 MX07
www.molex.com/product/rectind/
Industrial Products
HMC™
10A/40 circuits—IP65
Connection System
S
www.molex.com/product/rectind/
MX07 S-19
Industrial Products
HMC™
10A/52 circuits—IP65
Connection System
FS
S-20 MX07
www.molex.com/product/rectind/
Industrial Products
HMC™
12A/36 circuits—IP65
Connection System
S
www.molex.com/product/rectind/
MX07 S-21
Industrial Products
HMC™
(20A/48 circuits)—IP65
(12A/72 circuits)
Connection System
FS
S-22 MX07
www.molex.com/product/rectind/
Mini-HMC™
Shielded I/O
Receptacle Shell
Features and Benefits
■ Compact size provides a new form factor for smaller
industrial equipment
■ Connector-to-connector polarization ensures
proper mating
■ Two polarization options available to prevent mismating
■ Housings can be easily removed for design flexibility
and field servicing
■ Use with male or female housings
■ First-mate/last-break rigid ground terminal allows for
advanced signal and frame grounding
500809
8 Rows
Electrical
Voltage: 250V
Current: 7.0A max.
Contact Resistance: 10 milliohms max.
Dielectric Withstanding Voltage: 1500V AC
Insulation Resistance: 1000 Megohms min.
Physical
Shell: Aluminium Alloy
Ground Terminal: Brass
Plating: Nickel
Operating Temperature: -55 to +105˚C
Reference Information
Waterproof/Dustproof: IP65
VDE 0110: 250V pollution degree III,
Over Voltage Category II
Packaging: Bag
Mates With: 500809
Use With: 500810 plug shell
500812 and 500813 housings
Designed In: Millimeters
40
Order No.
500809-0000
500809-0010
Mini-HMC™
Shielded I/O
Plug Shell
Polarizing Key Type
A
B
Lead-free
Yes
Features and Benefits
■ Compact size provides a new form factor for smaller
industrial equipment
■ Connector-to-connector polarization ensures
proper mating
■ Two polarization options available to prevent mismating
■ Housings can be easily removed for design flexibility
and field servicing
■ Use with male or female housings
■ First-mate/last-break rigid ground terminal allows for
advanced signal and frame grounding
500810
8 Rows
Electrical
Voltage: 250V
Current: 7.0A max.
Contact Resistance: 10 milliohms max.
Dielectric Withstanding Voltage: 1500V AC
Insulation Resistance: 1000 Megohms min.
Physical
Shell: Aluminium Alloy
Ground Terminal: Brass
Plating: Nickel
Operating Temperature: -55 to +105˚C
Industrial Products
Circuits
Reference Information
Waterproof/Dustproof: IP65
VDE 0110: 250V pollution degree III,
Over Voltage Category II
Packaging: Bag
Mates With: 500809
Use With: 500811 cover, 500812 and 500813 housing
Designed In: Millimeters
Circuits
40
Order No.
500810-0000
500810-0010
www.molex.com/product/mini-hmc.html
Polarizing Key Type
A
B
S
Lead-free
Yes
MX07 S-23
3.00mm (.118") Pitch
Mini-HMC™
Crimp Housing
Features and Benefits
■ “One touch lock” enables easy operation
■ Compact size provides design flexibility
■ Same proven crimp terminals as our CRC connectors
■ Connector-to-connector polarization ensures
proper mating
■ Fully-shrouded housing to protect contacts
■ User-friendly latches enable easy housing insertion
and removal for field servicing
■ Locking ribs provide secure housing retention
500813
Female, Dual Row
Electrical
Voltage: 250V
Current: 7.0A max.
Contact Resistance: 10 milliohms max.
Dielectric Withstanding Voltage: 1500V AC
Insulation Resistance: 1000 Megohms min.
Physical
Housing: White glass-filled nylon 6/6
Operating Temperature: -55 to +105˚C
Reference Information
Waterproof/Dustproof: IP65
VDE 0110: 250V pollution degree III,
Over Voltage Category II
Packaging: Bag
Use With: 500809 receptacle shell, 500810 plug shell,
56120 and 56121 terminals
Mates With: 500812
Designed In: Millimeters
Circuits
10
Order No.
500813-1000
Lead-free
Yes
3.00mm (.118") Pitch
Mini-HMC™
Crimp Housing
Features and Benefits
■ “One touch lock” enables easy operation
■ Compact size provides design flexibility
■ Same proven crimp terminals as our CRC connectors
■ Connector-to-connector polarization ensures
proper mating
■ Fully-shrouded housing to protect contacts
■ User-friendly latches enable easy housing insertion
and removal for field servicing
■ Locking ribs provide secure housing retention
Industrial Products
500812
Male, Dual Row
FS
Electrical
Voltage: 250V
Current: 7.0A max.
Contact Resistance: 10 milliohms max.
Dielectric Withstanding Voltage: 1500V AC
Insulation Resistance: 1000 Megohms min.
Physical
Housing: White glass-filled nylon 6/6
Operating Temperature: -55 to +105˚C
Reference Information
Waterproof/Dustproof: IP65
VDE 0110: 250V pollution degree III,
Over Voltage Category II
Packaging: Bag
Use With: 500809 receptacle shell, 500810 plug shell,
56118 and 56119 terminals
Mates With: 500813
Designed In: Millimeters
Circuits
Order No.
Lead-free
10
500812-1000
Yes
S-24 MX07
www.molex.com/product/mini-hmc.html
Mini-HMC™
Shielded I/O
End Bell Cap Assembly
Features and Benefits
■ Internal thread for use with external threaded hoods
■ Removable cable cap provides wire organization
and protection
■ PVC bush protects against water and contamination
58550
PG 29 Type
For External
Threaded Hoods
Reference Information
Waterproof/Dustproof: IP65
VDE 0110: 250V pollution degree III,
Over Voltage Category II
Packaging: Bag
Use With: 500811 cover
Designed In: Millimeters
Wire Size Diameter
14.00-18.00
17.00-21.00
20.00-25.00
24.00-28.00
Lead-free
No
Mini-HMC™
Shielded I/O
Plug Cover
500811
8 Rows
Circuits
40
Order No.
500811-0010
www.molex.com/product/mini-hmc.html
Physical
Cable Cap: Brass
Bush: PVC
Plating: Nickel
Operating Temperature: -55 to +105˚C
Features and Benefits
■ Rounded-shape metal hood provides space savings and
user-friendly handling
■ Spring-action lever provides smooth locking and
secure mating retention
■ Durable metal shell for rugged environments
Electrical
Voltage: 250V
Current: 7.0A max.
Contact Resistance: 10 milliohms max.
Dielectric Withstanding Voltage: 1500V AC
Insulation Resistance: 1000 Megohms min.
Reference Information
Mates With: 500809
Use With: 500810 plug shell; 58550 end bell cap assembly
Waterproof/Dustproof: IP65
VDE 0110: 250V pollution degree III, Over Voltage
Category II
Packaging: Bag
Designed In: Millimeters
Physical
Cover: Aluminium Alloy
Lock Pin/Lever Spring: Stainless Steel
Operating Temperature: -55 to +105˚C
Industrial Products
Order No.
58550-0000
58550-0001
58550-0002
58550-0003
Electrica
Voltage: 250V
Current: 7.0A max.
Contact Resistance: 10 milliohms max.
Dielectric Withstanding Voltage: 1500V AC
Insulation Resistance: 1000 Megohms min.
S
Lead-free
Yes
MX07 S-25
5.00mm (.197") Pitch
MTC™
Spring-Type Receptacle
Features and Benefits
■ Cage-clamp terminal provides secure terminal retention
■ Friction lock offers secure mating retention
■ Wide wire lead-in facilitates wire insertion
■ Accepts 14 to 26 AWG for various power needs
54927
Reference Information
Product Specification: PS-51240-005
UL File Number: E29179
CSA File Number: LR19980
TUV File Number: R50006069
Packaging: Tray
Designed In: Millimeters
Circuits
3
4
5
6
Order No.
54927-0320
54927-0321
54927-0325
54927-0420
54927-0421
54927-0425
54927-0520
54927-0521
54927-0525
54927-0620
54927-0621
54927-0625
Physical
Housing: PBT, UL 94V-0
Contact: Copper Alloy
Plating: Tin
Underplating: Nickel
Operating Temperature: -30 to +85˚C
Lead-free
Yes
7.50mm (.295") Pitch
MTC™
Spring-Type Receptacle
Features and Benefits
■ Cage-clamp terminal provides secure terminal retention
■ Friction lock offers secure mating retention
■ Wide wire lead-in facilitates wire insertion
■ Accepts 14 to 26 AWG for various power needs
54928
Reference Information
Product Specification: PS-51241-005
UL File Number: E29179
CSA File Number: LR19980
TUV File Number: R50006069
Packaging: Tray
Designed In: Millimeters
Industrial Products
FS
Color
White
Black
Gray
White
Black
Gray
White
Black
Gray
White
Black
Gray
Circuits
3
4
5
6
S-26 MX07
Order No.
54928-0370
54928-0371
54928-0375
54928-0470
54928-0471
54928-0475
54928-0570
54928-0571
54928-0575
54928-0670
54928-0671
54928-0675
Color
White
Black
Gray
White
Black
Gray
White
Black
Gray
White
Black
Gray
Electrical
Voltage: 250V
Current: 16.0A max.
Contact Resistance: 3 milliohms max.
Dielectric Withstanding Voltage: 2500V AC
Insulation Resistance: 1000 Megohms min.
Electrical
Voltage: 400V
Current: 16.0A max.
Contact Resistance: 3 milliohms max.
Dielectric Withstanding Voltage: 2500V AC
Insulation Resistance: 1000 Megohms min.
Physical
Housing: PBT, UL 94V-0
Contact: Copper Alloy
Plating: Tin
Underplating: Nickel
Operating Temperature: -30 to +85˚C
Lead-free
Yes
www.molex.com/product/wb/mtc.html
MTC™
Plastic Lever
Features and Benefits
■ Lever actuator provides quick and easy termination
Reference Information
Packaging: Bag
Designed In: Millimeters
54932
For Spring-Type Receptacle
Lead-free
Yes
5.00mm (.197") Pitch
MTC™
PCB Header
55757
Right Angle
Circuits
3
4
5
6
Order No.
55757-0320
55757-0321
55757-0420
55757-0421
55757-0520
55757-0521
55757-0620
55757-0621
www.molex.com/product/wb/mtc.html
Features and Benefits
■ Accepts both spring-type and crimp-type receptacles
for design flexibility
■ Friction lock provides secure mating retention
■ Polarization keys prevent mismating
■ Molded guides facilitate mating
Electrical
Voltage: 250V
Current: 16.0A max.
Contact Resistance: 3 milliohms max.
Dielectric Withstanding Voltage: 2500V AC
Insulation Resistance: 1000 Megohms min.
Reference Information
Product Specification: PS-51240-005
UL File Number: E29179
CSA File Number: LR19980
TUV File Number: R50006069
Packaging: Tray
Designed In: Millimeters
Physical
Housing: Glass-filled 6/6 nylon, UL 94V-0
Contact: Copper Alloy
Plating: Tin
Underplating: Nickel
Operating Temperature: -30 to +85˚C
Color
White
Black
White
Black
White
Black
White
Black
Industrial Products
Order No.
54932-0000
Physical
Housing: 6/6 nylon, UL 94V-0
S
Lead-free
Yes
MX07 S-27
7.50mm (.295") Pitch
MTC™
PCB Header
55759
Right Angle
Circuits
3
4
5
Order No.
55759-0370
55759-0371
55759-0375
55759-0470
55759-0471
55759-0475
55759-0570
55759-0571
55759-0575
Features and Benefits
■ Accepts both spring-type and crimp-type receptacles
for design flexibility
■ Friction lock provides secure mating retention
■ Polarization keys prevent mismating
■ Molded guides facilitate mating
Electrical
Voltage: 400V
Current: 16.0A max.
Contact Resistance: 3 milliohms max.
Dielectric Withstanding Voltage: 2500V AC
Insulation Resistance: 1000 Megohms min.
Reference Information
Product Specification: PS-51241-005
UL File Number: E29179
CSA File Number: LR19980
TUV File Number: R50006069
Packaging: Tray
Designed In: Millimeters
Physical
Housing: 6/6 nylon, UL 94V-0
Contact: Copper Alloy
Plating: Tin
Underplating: Nickel
Operating Temperature: -30 to +85˚C
Color
White
Black
Gray
White
Black
Gray
White
Black
Gray
Lead-free
Circuits
6
Yes
7
Order No.
55759-0670
55759-0671
55759-0675
55759-0770
55759-0771
55759-0775
Color
White
Black
Gray
White
Black
Gray
Lead-free
Yes
www.molex.com/product/wb/mtc.html
Industrial Products
Wire Management Products
FS
Heat Shrink Tubing
Molex offers a wide variety of heat shrink tubing including
thin-wall, adhesive-lined dual-wall and heavy-wall polyolefin
tubing as well as heat shrinkable PVC.
Thin (single) wall is high quality tubing with a wide variety
of uses. It is made from flame retardant polyolefin, giving
it excellent physical, chemical and electrical properties
that meet industrial and military requirements for highly
reliable, general-purpose tubing.
Closed-End Connectors
Molex nylon closed-end connectors feature two-piece
construction. A translucent nylon insulator is adhered to the
pure electrolytic, copper insert. Closed-end connectors are
used in a wide variety of situations to “pigtail” two or more
wires together, and can be used as a dead end splice or one
power line and multiple lead offs.
Multi-Lock Connectors
The Multi-Lock is an insulation displacement connector
Dual-wall tubing is adhesive lined, and manufactured using that allows quick tap-and-run connections. Using ordinary
fully flame retardant polyolefin tubing which offers superior channel lock pliers, these color-coded connectors make
quick, reliable, pre-insulated splices without having to strip,
strain relief as well as environmental sealing capabilities.
twist or solder.
Heavy-wall tubing is UL rated for direct burial applications.
This tubing is chemically cross linked during manufacturing The Multi-Lock connector consists of a polypropylene
insulation with a tin-plated brass barb. Once the appropriate
which ensures that it will not split or rupture during
wires have been inserted, the barb is squeezed such that it
installation, even if overheated.
“displaces” the insulation and makes contact with the wire,
Our economical PVC tubing has a longitudinal shrinkage
creating an electrical connection. The cover is then snapped
of approximately 20% allowing ripple free conformance
into position, completely insulating the barb and wire.
around sharp bends such as appliance handles and bus bars.
S-28 MX07
Wire Connectors
Molex Wire Connectors offer a cost effective way to produce
safe and secure wire connections. The tough, thermoplastic
shell provides UL-94V2 flame retardant protection while
the fixed square-wire spring construction offers a secure
connection that will not relax over time.
Standard Twist Locks feature a threaded funnel entry to
easily guide wires into the connector.
Wing Locks offer deep gripping ribs and swept-back wings
that permit a higher torque.
High Temp Wire Connectors are used in applications that
require continued exposure to heat.
Cable Ties
Molex offers a full line of standard cable ties as well as
selected mounting and identification ties. Our cable ties are
constructed from durable nylon 6/6 and offer a compact,
one piece design. These industry standard products are
designed to meet or exceed the MIL-S-23190E tensile
strength requirements.
www.molex.com/product/wiremgmt.html
MagKrimp™
Magnet Wire Splice
Features and Benefits
■ Serrated barrels penetrate magnet wire insulation as
they are applied, eliminating the need for stripping,
brazing and welding
■ Open side provides easy wire access and makes internal
coil tapping easy
35455
Reference Information
Product Specification: PS-35455-001
Packaging: Reel
Designed In: Millimeters
Order No.
35455-9702
35455-9802
35454-9902
Wire Range (CMA)
1500-5000
3000-7000
7000-13,000
Electrical
Voltage: 300V
Current: 20.0A
Contact Resistance: 5 milliohms max.
Physical
Contact: Brass
Plating: Tin
Operating Temperature: -40 to +120˚C
Lead-free
Yes
www.molex.com/customer.html?seriesNumber=35455
Features and Benefits
■ Uninsulated splices shaped like an open “U”
accommodate stranded wire
■ Non-insulation support
35760
Electrical
Current: 25.0A
Contact Resistance: 3 milliohms max.
Physical
Contact: Brass
Plating: Tin
Reference Information
Product Specification: PS-35760-003
Packaging: Reel
Designed In: Millimeters
Order No.
35760-7100
35760-7110
35760-7200
35760-7205
35760-7210
35760-7300
35760-7310
35760-7400
35760-7410
Material
Brass
Tin-plated Brass
Brass
Tin-plated Brass
Tin-plated Brass
Brass
Tin-plated Brass
Brass
Tin-plated Brass
www.molex.com/customer.html?seriesNumber=35760
Wire Range
Industrial Products
Wire Splice Terminal
Lead-free
24-22
22-18
Yes
S
16-14
14-10
MX07 S-29