SKIDO
FEATURES
Effective and economical LED lighting solution








Compact and versatile
Maximised savings in energy and maintenance costs
Integrated lenses for performing photometry
ThermiX® for long lasting performance
Wide operating temperatures from -20° up to 50°C
Wide operating voltage range: 198-264V
Easy to install
Surge protection 10kV (optional)
TYPES OF APPLICATION








Urban roads and streets
Residential streets
Squares and pedestrian areas
Bridges
Parks
Car parks
Bike paths
Industrial halls
Skido Product Sheet - 13/03/2015 - To make sure this is the most recent revision, please consult
www.schreder.com.
Copyright © 2015 Schréder SA. All rights reserved. Specifications are of an indicative nature and subject to change without notice.
1/4
DIMENSION DRAWING
DIMENSIONS AND CHARACTERISTICS
SKIDO1 (SKIDO)
Length (mm)
Width (mm)
Height (mm)
Weight (kg)**
Tightness level*
Impact resistance*
Electrical class*
Aerodynamic resistance (CxS)
395
101
54
1
IP65
IK07
Class I EU
0,033 m²
* According to IEC-EN60598 and IEC-EN62262
** Average weight. The max weight is +/- 10% more but for the exact weight according to the configuration, please contact us.
SUMMARY
CONCEPT
Luminaire specifically designed for LEDs
Recommended installation height: between 3 and 6m
For optimal heat dissipation, the driver and LED engine are in separate compartments and juxtaposed in a horizontal section
HOUSING & FINISH
•
Housing in high-pressure, die-cast aluminium, polyester powder coated
•
Protector in UV resistant polycarbonate
•
Colour: RAL grey 7037
INSTALLATION
•
Lateral fixation with stainless steel clamp diameter 32-42mm, tightened with 4 stainless steel screws M8
•
Supplied with out-going cable (0.3m length 3G1² or 3G1.5²) for easy installation
OPTICAL UNIT
•
Flatbed PCB with acrylic lens overlay principle
•
CRI > 70
•
ULOR: 0%
Skido Product Sheet - 13/03/2015 - To make sure this is the most recent revision, please consult
www.schreder.com.
Copyright © 2015 Schréder SA. All rights reserved. Specifications are of an indicative nature and subject to change without notice.
2/4
LED lumen depreciation
•
Lifetime residual flux @ Tq=25°C @ 50.000 hrs: 700mA: 90%
ELECTRICAL
•
Class I
•
Input voltage: 230V - 50Hz
•
Power factor > 90% at full load
•
Surge protection: 4kV minimum, optional10kV, 10kA
STANDARDS & CERTIFICATIONS
•
CE
•
ENEC
•
LM79-80
•
ROHS
•
All measurements in ISO17025 accredited laboratory
OPTIONS
•
Other RAL or AKZO colours
CONCEPT
1.
Thermix® for long lasting performance
The thermal management of LEDs is crucial for a luminaire’s reliability
To maximise effectiveness and maintain flux over time, several parameters are optimised:
 Thermal compartmentalisation between the LEDs and the control gear
 Direct conduction by minimising the path between the heat source and the outside
 Optimised design of the external heat exchange surface
Skido Product Sheet - 13/03/2015 - To make sure this is the most recent revision, please consult
www.schreder.com.
Copyright © 2015 Schréder SA. All rights reserved. Specifications are of an indicative nature and subject to change without notice.
3/4
LUMEN AND POWER DETAILS
Typical data for Cool White (CW) LEDs (5500 K, CRI min. 70) at Tq 25° C.
Model
Acronym
Colour
temp.
SKIDO
SKIDO1
CW
Flux
code
001A0
Typical
luminaire
output
(lm)
1200
Luminaire
power
(W)
Luminaire
efficacy
(lm/W)
Current
(mA)
16
75
700
Typical
LED
flux
(lm)
1500
LED
Count
6
Note: The flux is an indicative average and may vary with the different optics and types of protector. Tolerance on LED flux is
± 7% and on total luminaire power ± 5 %.
The precise flux and corresponding matrix for each configuration are available on www.schreder.com
PHOTOMETRICS
5122AS
Road lighting
Skido Product Sheet - 13/03/2015 - To make sure this is the most recent revision, please consult
www.schreder.com.
Copyright © 2015 Schréder SA. All rights reserved. Specifications are of an indicative nature and subject to change without notice.
4/4
How to create a valid ordering code ?
1
Go
2
Configure
3
Choose
to the Ordering Data page(s) and compose your solution by choosing one code per column
in order to specify the PRODUCT ID, cOUNTRY (of installation), optical BLOCK, GearS,
Controls, Fixations and Colour. You may choose several Options.
your solution easily: most of the proposed options do not require
any additional information and are briefly explained below the
code (refer to the footnotes to check compatibility between the selected options).
your Flux, Photometry and Control codes by referring to more detailled information included in the Product Sheet.
Depending on your choice of colour temperature,
please refer to the corresponding table to find
the flux code for the typical lumen package you
require(*). Please check the Product ID to make
sure that the lumen package you need is available with the size you have chosen.
To choose the photometry, refer to the 4 digit
codes beside the curves and diagrams(*). AS =
asymmetrical, SY = symmetrical and BL = Back
Light control.
(*)
The precise flux and corresponding matrix for each
configuration are available on www.schreder.com
To configure the ideal solution between the
features you need and the available controllers,
refer to the description in the Product sheet.
exampleS of valid ordering codes
only with
standard
features
PRODXX - 00 - NW008AH - 5118BL - GL01 - V02D03S3 - C000 - C201 - U4 - A1 - A6 - 0L
Universal
(2 digits)
with
customised
requests
Photometry
type
Colour
(6 digits)
Product
Protector
temperature
ID
type
ISO 3166 + Flux code
(6 digits)
(2 digits)
country
(7 digits)
Custom
code
photometry
(2 digits)
Voltage & elec. Power
class + Dimming cable
+ Elec. protection type
(8 digits)
(4 digits)
Controller +
Photocell +
Sensor
(4 digits)
Voltage & elec. Custom Custom contr.,
class + Custom
power Photocell &
dimming + Elec.
cable
Sensor
(4 digits)
protection (8 digits) (4 digits)
Options
Fixation
(2 digits)
Colour
(2 digits
(2 digits)
each)
Customised options (Photometry,
Dimming, Cables, Control & Photocell) for which you will receive a
specific code (4 digits each)
Specific RAL
colour
(8 digits)
PRODXX - AT - NW008AH - CUSTOM - GL04 - V02D04S3 - CJZZ - ZZZZ - U4 - PXXX - DXXX - CXXX - SXXX - TXXX - RAL3005M
ORDERING DATA
SKIDO
ID
PRODUCT
ID
OPTICAL BLOCK
COUNTRY
COUNTRY OF
COLOUR
FLUX
INSTALLATION TEMP
CODE
[1]
[2]
SKIDO1
00
Universal
Standard
GEARS
CONTROLS [4]
CONTROLLER
PHOTO CELL
SENSOR
FIXATIONS
FIXATIONS
OPTIONS
OPTIONS [5]
COLOUR
COLOUR
C0
No Controller
0
No Photocell
0
No Sensor
L1
Lateral entry
N0
No Others
0S
RAL 7001 T
CC
3C
Cable length 3G1.5²
0,5m
P1
Packaging color
box
01
RAL 7037 T
CI
ZZ
Cable length CUSTOM
5m
CABLE
AA
Special labeling
RALxxxx M
Other RAL colour
Matte
AU
Australia
CXXX
Cables custom
RALxxxx B
Other RAL colour
Brilliant
…
LXXX
Label custom
RALxxxx T
Other RAL colour
Textured
FXXX
Finishing Colour ,
vernish, …
ZZ
Other specific
paint*
PHOTOM PROTECTOR
ETRY
TYPE [3]
VOLTAGE & EL.
CLASS
DIMMING
ELECTR. PROTECTION
POWER
CABLE
5122AS
V02
230V CLI
D00
No Dimming
S2
4kV + Fuse
CB
3A
Cable length 3G1²
0,3m
AO
Angola
S3
10kV - no Fuse
AR
Argentina
S4
10kV + Fuse
CW
Cold White
001A0
PC03
Shaped PC
CABLE TYPE
OXXX
Others
Your Order
SKIDO1
Example:
__
CW
001A0
5122AS
PC03
V02
D00
S_
C_
3_
C0
SKIDO1-BE-CW001A0-5122AS-PC03-V02D00S3-CB3A-C000-L1-N0-01
Notes:
[1] Please provide country of installation to ensure country specific settings are taken into account. Schréder will provide you the code to use (00 (universal standard) or the country's ISO code).
[2] See further Lumen and Power details table. [3] See further Photometrics table.
[4] Schréder fixtures are compatible with most controls equipment available on the market. Please contact Schréder for more information.
[5] Multiple SELECTIONS and VARIANTS concatenation possible eg. -A2-AA-P0Z0-D0W0-C0Y0-S0M0-L0H0.
*Please contact Schréder to specify your requirement. A custom requirement must be validated by Schréder and may impact the delivery leadtime.
Skido Product Sheet - 13/03/2015 - To make sure this is the most recent revision, please consult www.schreder.com
Copyright © 2015 Schréder SA. All rights reserved. Specifications are of an indicative nature and subject to change without notice.
0
0
L1
N0
__