Errata Baseline
Mechanical Sample
This section represents all mechanical errata. Since Military IC's must be compliant to military specifications,
outline drawings contained in data books do not represent actual limits used for military products. The military
products designers reference guide will take precedence over all published outlines contained in individual data
books or data sheets. Data Book/Data Sheet outlines will only be applicable in the event the military products
designers reference guide does not provide coverage for a particular package.
J
JT
PART NUMBER
JD
FJ
FQ
GB
HL
FK
DATA SHEET/DATA BOOK
WD
ERRATA STATUS
J
APPLICABLE TI DATA BOOKS
ERRATA DATE: 11-02-90
REFERENCING CERAMIC DUAL-IN-LINE
PACKAGE OUTLINES FOR J AND JT DESIGNATORS,
ALL PIN COUNTS.
===========================================================================
CORRECTION:
FROM:
TO:
LEAD THICKNESS (INCHES)
.008 MIN .014 MAX
.008 MIN .015 MAX
WITH ALLOWANCE OF
+ .00 FOR SOLDER
DIP.
ADD NOTE: THIS CHANGE CONFORMS TO THE REQUIREMENTS OF MIL-M-38510 APPENDIX
C AND THE MILITARY PRODUCTS DESIGNER'S REFERENCE GUIDE, LITERATURE
NUMBER SGYZ001C, PAGES 17-5 AND 17-6.
JT
APPLICABLE TI DATA BOOKS
ERRATA DATE: 11-02-90
REFERENCING CERAMIC DUAL-IN-LINE
PACKAGE OUTLINES FOR J AND JT DESIGNATORS,
ALL PIN COUNTS.
===========================================================================
CORRECTION:
FROM:
TO:
LEAD THICKNESS (INCHES)
.008 MIN .014 MAX
.008 MIN .015 MAX
WITH ALLOWANCE OF
+ .00 FOR SOLDER
DIP.
ADD NOTE: THIS CHANGE CONFORMS TO THE REQUIREMENTS OF MIL-M-38510 APPENDIX
C AND THE MILITARY PRODUCTS DESIGNER'S REFERENCE GUIDE, LITERATURE NUMBER
SGYZ001C, PAGES 17-5 AND 17-6.
JD
SMJ4164 DATA SHEET,
MOS MEMORY DATA BOOK,
ERRATA DATE:
16 PIN
SGMS164A, MAY 1988
1989, PAGE 12-31
9-25-90
SMJ4256 DATA SHEET,
SGMS256B, MARCH 1988
===========================================================================
MECHANICAL DATA, SGMS164A-PAGE 19 / SGMS256B-PAGE 21:
CORRECTION:
FROM:
TO:
SEATING PLANE TO BOTTOM
OF CERAMIC
0,51 (0.020) MIN
0,38 (0.015) MIN
FJ
MILITARY DESIGNER'S REFERENCE
ERRATA DATE: 3/13/92
GUIDE, 1990/91 - SGYZ001C
===========================================================================
PAGE: D-330, D-65
CORRECTION (LIST PARAMETERS)
FROM:
TO:
PKG DRAWING CHANGES:
1) SPACE BETWEEN CORNER
0.38(0.015) MIN
0.30(0.012)MIN
BRAZE PADS
2) LEAD HEIGTH
MAX. 3.43(0.135)
4.01(0.158)
MIN
2.92(0.115
2.54(0.100)
3) PIN 1 INDEX CORNER NOTCH
MAX. 0.51 (0.020) 0.76 (0.030)
X45DEG
MIN. 0.25 (0.010) 0.25 (0.010)
4) LEAD WIDTH
MAX
0.81 (0.032) 0.89 (0.035)
MIN
0.51 (0.020) 0.64 (0.025)
5) PKG WIDTH WITHOUT LEADS
MAX 24.38 (0.960) 24.51 (0.965)
PAGE: 17-20 / REFERENCE: SMJ320C25FJ, SMJ320C26FJ
CORRECTION (LIST PARAMETERS)
FROM:
1) OVERALL CERAMIC SIZE DIMENSION
MIN. 16.28 (0.641)
"B" FOR THE 44 JLCC
MAX. 16.74 (0.659)
2) SPACE BETWEEN CORNER BRAZE PADS
0.38(0.015) MIN
3) LEAD HEIGTH
MAX. 3.05(0.120)
4) PIN 1 INDEX CORNER NOTCH
MAX. 0.51 (0.020)
MIN.
0.25 (0.010)
TO:
16.26 (0.640)
16.76 (0.660)
0.30(0.012)MIN
4.01(0.158)
0.76 (0.030)
X45DEG
0.25 (0.010)
FQ
MILITARY DESIGNER'S REFERENCE
ERRATA DATE: 3-29-90
GUIDE, 1990/91, SGYZ001C
9-06-90
===========================================================================
CUMULATIVE ERRATA:
CORRECTION:
FROM:
TO:
PAGE: 17-18
PACKAGE WIDTH:
9.02(.355)/8.76(.345)
9.02(.355)/8.69(.342)
PACKAGE LENGTH:
17.35(.683)/16.94(.667)
17.35(.683)/16.89(.665)
PAGE: 17-18
CORRECTION:
FROM:
DIMENSION A
| DIMENSION B
TO:
DIMENSION A
| DIMENSION B
2,34 (0.092) | 1,47 (0.058)
1,75 (0.069) | 0,81 (0.032)
DIMENSIONS ARE IN MM(INCHES)
2,34 (0.092) | 1,47 (0.058)
1,63 (0.064) | 0,66 (0.026)
GB
TMS320C2X USER'S GUIDE
ERRATA DATE: 3-13-92
SPRU014B
===========================================================================
PAGE: D-32, D-67 / REFERENCE: SMJ320C25/SMJ320C26
CORRECTION (LIST PARAMETERS)
FROM:
TO:
PKG DRAWING CHANGES:
LID DIMENSION (2 PLACES)
13.5 (0.530) NOM
OMIT
PAGE: 17-20 / 1990/1991 MILITARY PRODUCTS DESIGNERS REFERENCE GUIDE
CORRECTION (LIST PARAMETERS)
FROM:
TO:
PKG DRAWING CHANGES:
1) LID DIMENSION (2 PLACES)
13.5 (0.530) NOM
OMIT
2) SEATING PLANE TO
BOTTOM OF PACKAGE
MAX
1.93 (0.076)
1.41 (0.055)
MIN
1.35 (0.053)
1.12 (0.045)
3) SEATING PLANE TO
MIN
3.56 (0.140)
2.794 (0.110)
TOP OF LID
4) BRAZE PAD WIDTH
--1.778 (0.070) NOM
5) SEATING PIN RING WIDTH MIN 1.42 (0.056)
1.397 (0.055)
MAX 1.12 (0.044)
1.143 (0.045)
HL
SMJ4C1024 DATA SHEET,
ERRATA DATE: 3-29-90
SGMS023A, DECEMBER, 1989
===========================================================================
CORRECTION:
FROM:
TO:
PAGE: 22
PACKAGE WIDTH:
9.02(.355)/8.76(.345)
9.02(.355)/8.69(.342)
PACKAGE LENGTH:
17.35(.683)/16.94(.667)
17.35(.683)/16.89(.665)
DIMENSIONS ARE IN MM(INCHES)
FK
20 PAD
APPLICABLE TI DATA BOOKS
ERRATA DATE: 9-25-90
REFERENCING CERAMIC SQUARE
CHIP CARRIERS, FK DESIGNATOR
===========================================================================
MECHANICAL DRAWING CHANGE:
CORRECTION:
FROM:
TO:
20-PAD DIMENSION B
7,80 (0.307) MIN
7,24 (0.285) MIN
NOTE: THIS ERRATA AFFECTS ALL 20-PAD FK PACKAGES
WD
ADVANCED CMOS LOGIC DATA BOOK
ERRATA DATE: 11-06-90
048
1990, PAGE: 3-16
===========================================================================
MECHANICAL DATA, PACKAGE DIMENSIONS, 3-16
CORRECTION:
OUTSIDE LEAD FRAME DIM.
FROM:
30,5(1.200) NOM
PACKAGE HEIGHT
2,18(0.086) NOM
FROM CENTER LINE OF OUTERMOST
LEADS TO OUSIDE EDGE OF
PACKAGE
NOT SPECIFIED
TO:
30,48(1.200)MAX/
24,13(0.950)MIN
2,434(0.097)MAX/
2,108(0.083)MIN
0,584(0.023)NOM