www.osram.com | www.siteco.com Light is aesthetic Siteco BELL LED Efficient lighting for roads, paths and plazas with high quality of light and optimum visual comfort. Light is OSRAM 2 BELL LED Efficient lighting for roads, paths and plazas with high quality of light and superior visual comfort. 3 BELL LED | Now Even More Efficient The dawn of a new era A classic, decorative design, simultaneously better light, and with outstanding lighting technology and significantly lower costs – the BELL LED is the future-fit solution for decorative lighting tasks in outdoor areas. Two construction sizes, two light colours, several control variants and various covers make it a highly flexible all-rounder. State-of-the-art technology with an eye to the future — Reduced maintenance effort and costs due to high system lifespan up to 80,000 h (L85/B10) — Optimised energy consumption and overheads due to very good system performance: up to 115 lm/W — High quality of light for best visual comfort due to LED module with HD reflector technology — Intelligent light control for even greater reduction of operating costs — Further savings potential with upgrade option to future LED generations — Future-safe with Siteco gear tray technology SMALL BELL LED For plazas, parking lots, residential areas, service and collection roads, with mounting heights between 3.5 m and 5 m 4 BELL LED | Now Even More Efficient LARGE BELL LED For plazas, parking lots, residential areas, service and collection roads, with mounting heights between 4 m and 6 m 5 BELL LED | Amortisation and Refurbishments Modernisation with maximum convenience Efficiency is the buzzword, and it's all about saving energy and thus also achieving lower operating costs. Efficiency though is also now demanded by EU legislation, and following the ban on incandescent lamps, high pressure mercury vapour lamps will also be removed from the market to 2015 as a result of ErP regulations - precisely those lamps found in many obsolete lighting systems. The time has come to prepare for the future. Both the BELL LED and the special BELL LED module are ideally suited for modernising or expanding existing installations with low effort. The visual appearance is maintained. BELL LED construction Mast and bracket Both components are normally maintained with refurbishments. The service life of masts is a good 50 years. Housing and bracket are connected for easy mounting: with a thread until 2002, and after this date via bayonet catch. Housing Usually the housing is not replaced either with modernisations. The value of the luminaire itself is secured. BELL LED module Practical, simple and highly easy. Easy mounting is focused on with refurbishments, because BELL LED modules have the LED gear tray and a new enclosure already connected. They are inserted together with a few turns of the hand. The LED gear tray and cover are also available separately if required. 6 BELL LED Rapid amortisation Energy costs are of major importance for the lighting of roads and open areas. Energyefficient, long life LED technology pays off, and in particular because when an existing system is modernised the investment costs are significantly lower than installing a new system. Investments may already be amortised after five years. Investment sum Total savings after 25 years of operation 20,000 euros 70,000 euros Amortisation period 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 System operation in years Modernisation in comparison to continued operation: Basis for calculation: static cost comparison, 1 km carriageway, 28 light points, 4000 operating hours/year, 0.20 euros per kW/h; old system: HME 125 W, 2400 h with 100% (139 W) 1600 h reduced mode (90 W); new system: SMALL BELL LED, 2400 h with 100% (16 W); 1600 h reduced mode (9 W). Calculate the amortisation times for your system with the Siteco Cost Efficiency Calculator. More on page 26 or see www.siteco.com/sleo 7 BELL LED | Future-Safe LED Module Modernisation with high-end technology No compromises should be made with investments. Taking the decision for modernisation is simultaneously a decision for the future. This is why the BELL LED is our bell luminaire with the best lighting technology until now, both highly efficient and oriented to the future, because the special LED module has a highly precise optical system. Facetted reflectors split the light of high power LEDs and distribute this directionally onto the working plane. In this way the BELL LED optimally complies with the demands of various situations with road traffic. The BELL LED module Optimal thermal management Thermal management has been ideally implemented with BELL luminaires upgraded from conventional light sources to LED technology. The LEDs are directly connected to the heat sink, guaranteeing optimum heat dissipation and service life for the components. Immediate luminous flux Standard-compliant light, right from the beginning. Complete luminous flux is available from the LED module directly after switching on, and even after switching on a second time. Start-up times as with conventional lamps no longer apply. High Definition Reflector (HD-R) Sophisticated facetted reflectors target the rays of high power LEDs for asymmetric, wide light distribution onto roads and plazas. The system also prevents glare for car drivers, pedestrians and residents. 8 BELL LED | Future-Safe LED Module Lighting technology BELL LED brings a maximum of light onto the working plane, due to optimised lighting technology. 9 BELL LED | Simple Installation Optimum handling is of central importance Simple and practical: upgrading BELL luminaires to LED is done with a few flicks of the wrist. The cover is removed by rotating, and the gear tray with the old lamps is removed. With the BELL LED module the gear tray and LED module are already connected to the enclosure; these can be inserted together. Regular relamping as with conventional lamps is no longer necessary due to the long service life of the LED modules. The use of LED technology means that soiling of the luminaire is also less because LED light attracts significantly less insects. The BELL enclosure is removed simply To remove the old gear tray only two screws by rotating. need to be loosened. 10 BELL LED | Simple Installation The LED module is fastened to the housing via a retaining The LED module with gear tray and enclosure is inserted wire. This leaves both hands free for the connection. into the luminaire as a complete unit. Did you know already? Download the installation sequence: www.siteco.com/bell-video Tried-and-tested housing technology with a classic design and professional LED lighting technology at the same time – the BELL LED module is not the first modernisation solution offered by Siteco. Siteco as one of the first luminaire producers laid the foundation for LED variants of the classic town and park luminaires with development of the LED Module 520: energy-efficient, with electronic control according to needs, and with two light colours. Our experience is your advantage. 11 BELL LED | Intelligent Control Intelligent control saves even more energy In addition to the use of efficient LED technology, further energy can be saved by the application of intelligent controls. Not every traffic situation, type of weather or time of day needs the same quantity of light, and at the same time lighting must always comply with legislative standards, with the maxim being as little as possible and as much as required. Modern LED technology can be dimmed and switched steplessly and almost without power loss, and individual, electronic control is also possible. In this way the luminaire can be specifically set for its application with high precision and according to needs, and with minimum energy for operation. Up to 16 % of energy can be additionally saved for example via constant luminous flux control available with the Plus control package, rendering the over-dimensioning of lighting installations unnecessary and compensating for the agerelated reduction in luminous flux. Three functional packages are available: — Maximum flexibility and efficiency via integration into intelligent, networked lighting management and monitoring systems Premium — Intelligent, self-sufficient light management system for lighting according to requirements, based on individual programming — Electronic type plate and automatic data exchange for smart performance updates Plus — Night-time reduction at times of low traffic density to 50 % rated luminous flux, at less than 50 % rated power, via one control wire Basic Functional package details Standard Efficiency Communication Overheat protection Power reduction TimeFlexible luminous flux dependent configuration luminous flux control Constant luminous flux control Premium • • • • • Plus • • • • • Basic • • 12 Digital communication interface • Street Light Control Automatic data exchange Electronic type plate • • • • • Light according to needs Intelligent control of light makes the BELL LED a lighting solution for all situations. 13 BELL LED | Light Colour and Design A feel-good factor for towns When illuminating urban areas, safety and compliance with standards is focused on, but in towns with plazas, streets and prestigious roads, design with light is also important. During daytime as well, luminaires must blend harmoniously into their urban surroundings, providing light for living environments in towns and cities. The BELL LED achieves this interplay. The two available light colours of neutral white and warm white give flexibility to lighting design and make the LED luminaire a future-fit alternative to solutions with conventional lamps. Designing with light The BELL LED with neutral white light colour ensures especially efficient and colour-true lighting. But you have the choice: you can also illuminate streets and open areas with warm white LED light. 14 BELL LED | Light Colour and Design 15 BELL LED | Order Data LED SMALL BELL LED | with transparent cover Luminaire for suspended mounting to curved mast — luminaire housing of glass-fibre reinforced polyester; Siteco® metallic grey (DB 702S); cover of extension or wall bracket PMMA — LED with reflectors, for uniform, asymmetric wide light distribution; additional reduction of light spill to — protection rating: IP54 the rear due to shielding on building side; with — insulation class: II transparent cover — service life: up to 80,000h (L85/B10) — (luminaire suitable for curved mast extension in — microprocessor-controlled LED operating single or twin arrangements and wall bracket with electronics; with control functionality for lighting bayonet catch) management and monitoring — recommended mounting height: MH= 3.5…5m Function All versions: with temperature monitoring for protection of LEDs from thermal overload — Basic version: with power reduction via 230V control voltage | no luminous flux constancy — Plus version: with luminous flux constancy over complete service life | with integrated, programmable timer for luminous flux reduction at two levels | settable luminous flux for max. operation and for both reduction levels | all parameters settable via Service Box | on request: can be integrated via SDI into existing digital control systems and controlled from a central control point | alternative luminous flux reduction via 230V control voltage — Premium version: functional range as with Plus version, but for individual monitoring and control of the luminaire from a central control point from any distance via LONPowerLine without supplementary control wire (instead of SDI) Luminaire can be operated with factory pre-setting. The pre-setting with the Plus version can be modified with the dismantled luminaire, and with the Premium version can be modified with the mounted or dismantled luminaire Lamps Order No. OSRAM Siteco with ECG Basic Order No. LED 3000 > 80 1350 16 16 9 5.3 4050737783987 5XA1572E1A108 LED 4000 > 70 1600 16 16 9 5.3 4050737783901 5XA1572K1A108 with ECG Plus LED 3000 > 80 1220 15 16 8 5.3 4050737784038 5XA1572E1B108 LED 4000 > 70 1450 15 16 8 5.3 4050737783871 5XA1572K1B108 with ECG Premium LED 3000 > 80 1220 18 19 12 5.6 4050737784052 5XA1572E1C108 LED 4000 > 70 1450 18 19 12 5.6 4050737784007 5XA1572K1C108 — please order curved mast extension separately — please order SLC lighting management components for the Premium version separately if required — please order shielding on building side separately if required — luminaire colour: Siteco® metallic grey (DB 702S) as standard; (further DB and RAL colours on request) Accessories 16 Order No. Order No. OSRAM Siteco shielding on building side 0.2 4050737087979 5NA15700XB1 Siteco® Service Box, for Plus version 1.7 4039806998927 5EA6TEF01 BELL LED | Order Data LED SMALL BELL LED | with stippled cover Luminaire for suspended mounting to curved mast — luminaire housing of glass-fibre reinforced polyester; Siteco® metallic grey (DB 702S); cover of extension or wall bracket PMMA — LED with reflectors, for uniform, asymmetric wide light distribution; additional reduction of light spill to — protection rating: IP54 the rear due to shielding on building side; with — insulation class: II stippled cover — service life: up to 80,000h (L85/B10) — (luminaire suitable for curved mast extension in — microprocessor-controlled LED operating single or twin arrangements and wall bracket with electronics; with control functionality for lighting bayonet catch) management and monitoring — recommended mounting height: MH= 3.5…5m Function All versions: with temperature monitoring for protection of LEDs from thermal overload — Basic version: with power reduction via 230V control voltage | no luminous flux constancy — Plus version: with luminous flux constancy over complete service life | with integrated, programmable timer for luminous flux reduction at two levels | settable luminous flux for max. operation and for both reduction levels | all parameters settable via Service Box | on request: can be integrated via SDI into existing digital control systems and controlled from a central control point | alternative luminous flux reduction via 230V control voltage — Premium version: functional range as with Plus version, but for individual monitoring and control of the luminaire from a central control point from any distance via LONPowerLine without supplementary control wire (instead of SDI) Luminaire can be operated with factory pre-setting. The pre-setting with the Plus version can be modified with the dismantled luminaire, and with the Premium version can be modified with the mounted or dismantled luminaire Lamps Order No. Order No. OSRAM Siteco with ECG Basic LED 3000 > 80 1370 16 16 9 5.3 4050737784021 5XA1572E1A208 LED 4000 > 70 1630 16 16 9 5.3 4050737783864 5XA1572K1A208 with ECG Plus LED 3000 > 80 1240 15 16 8 5.3 4050737784045 5XA1572E1B208 LED 4000 > 70 1475 15 16 8 5.3 4050737783994 5XA1572K1B208 with ECG Premium LED 3000 > 80 1240 18 19 12 5.6 4050737784069 5XA1572E1C208 LED 4000 > 70 1475 18 19 12 5.6 4050737784014 5XA1572K1C208 — please order curved mast extension separately — please order SLC lighting management components for the Premium version separately if required — please order shielding on building side separately if required — luminaire colour: Siteco® metallic grey (DB 702S) as standard; (further DB and RAL colours on request) Accessories Order No. Order No. OSRAM Siteco shielding on building side 0.2 4050737087979 5NA15700XB1 Siteco® Service Box, for Plus version 1.7 4039806998927 5EA6TEF01 17 BELL LED | Order Data LED LARGE BELL LED | with transparent cover Luminaire for suspended mounting to curved mast — luminaire housing of glass-fibre reinforced polyester; Siteco® metallic grey (DB 702S); cover of extension or wall bracket PMMA — LED with reflectors, for uniform, asymmetric wide light distribution; additional reduction of light spill to — protection rating: IP54 the rear due to shielding on building side; with — insulation class: II transparent cover — service life: up to 80,000h (L85/B10) — (luminaire suitable for curved mast extension in — microprocessor-controlled LED operating single or twin arrangements and wall bracket with electronics; with control functionality for lighting bayonet catch) management and monitoring — recommended mounting height: MH= 4…6m Function All versions: with temperature monitoring for protection of LEDs from thermal overload — Basic version: with power reduction via 230V control voltage | no luminous flux constancy — Plus version: with luminous flux constancy over complete service life | with integrated, programmable timer for luminous flux reduction at two levels | settable luminous flux for max. operation and for both reduction levels | all parameters settable via Service Box | on request: can be integrated via SDI into existing digital control systems and controlled from a central control point | alternative luminous flux reduction via 230V control voltage — Premium version: functional range as with Plus version, but for individual monitoring and control of the luminaire from a central control point from any distance via LONPowerLine without supplementary control wire (instead of SDI) Luminaire can be operated with factory pre-setting. The pre-setting with the Plus version can be modified with the dismantled luminaire, and with the Premium version can be modified with the mounted or dismantled luminaire Lamps Order No. Order No. OSRAM Siteco with ECG Basic LED 3000 > 80 2590 28 28 14 7.8 4050737783567 5XA1562E1A108 LED 4000 > 70 3180 28 28 14 7.8 4050737784137 5XA1562K1A108 with ECG Plus LED 3000 > 80 2340 25 28 13 7.8 4050737784090 5XA1562E1B108 LED 4000 > 70 2870 25 28 13 7.8 4050737783956 5XA1562K1B108 with ECG Premium LED 3000 > 80 2340 28 31 16 8.0 4050737784113 5XA1562E1C108 LED 4000 > 70 2870 28 31 16 8.0 4050737783963 5XA1562K1C108 — please order curved mast extension separately — please order SLC lighting management components for the Premium version separately if required — please order shielding on building side separately if required — luminaire colour: Siteco® metallic grey (DB 702S) as standard; (further DB and RAL colours on request) Accessories 18 Order No. Order No. OSRAM Siteco shielding on building side 0.1 4050737087955 5NA15600XB1 Siteco® Service Box, for Plus version 1.7 4039806998927 5EA6TEF01 BELL LED | Order Data LED LARGE BELL LED | with stippled cover Luminaire for suspended mounting to curved mast — luminaire housing of glass-fibre reinforced polyester; Siteco® metallic grey (DB 702S); cover of extension or wall bracket PMMA — LED with reflectors, for uniform, asymmetric wide light distribution; additional reduction of light spill to — protection rating: IP54 the rear due to shielding on building side; with — insulation class: II stippled cover — service life: up to 80,000h (L85/B10) — (luminaire suitable for curved mast extension in — microprocessor-controlled LED operating single or twin arrangements and wall bracket with electronics; with control functionality for lighting bayonet catch) management and monitoring — recommended mounting height: MH= 4…6m Function All versions: with temperature monitoring for protection of LEDs from thermal overload — Basic version: with power reduction via 230V control voltage | no luminous flux constancy — Plus version: with luminous flux constancy over complete service life | with integrated, programmable timer for luminous flux reduction at two levels | settable luminous flux for max. operation and for both reduction levels | all parameters settable via Service Box | on request: can be integrated via SDI into existing digital control systems and controlled from a central control point | alternative luminous flux reduction via 230V control voltage — Premium version: functional range as with Plus version, but for individual monitoring and control of the luminaire from a central control point from any distance via LONPowerLine without supplementary control wire (instead of SDI) Luminaire can be operated with factory pre-setting. The pre-setting with the Plus version can be modified with the dismantled luminaire, and with the Premium version can be modified with the mounted or dismantled luminaire Lamps Order No. Order No. OSRAM Siteco with ECG Basic LED 3000 > 80 2620 28 28 14 7.8 4050737783574 5XA1562E1A208 LED 4000 > 70 3220 28 28 14 7.8 4050737783949 5XA1562K1A208 with ECG Plus LED 3000 > 80 2370 25 28 13 7.8 4050737784106 5XA1562E1B208 LED 4000 > 70 2910 25 28 13 7.8 4050737783932 5XA1562K1B208 with ECG Premium LED 3000 > 80 2370 28 31 16 8.0 4050737784120 5XA1562E1C208 LED 4000 > 70 2910 28 31 16 8.0 4050737783970 5XA1562K1C208 — please order curved mast extension separately — please order SLC lighting management components for the Premium version separately if required — please order shielding on building side separately if required — luminaire colour: Siteco® metallic grey (DB 702S) as standard; (further DB and RAL colours on request) Accessories Order No. Order No. OSRAM Siteco shielding on building side 0.1 4050737087955 5NA15600XB1 Siteco® Service Box, for Plus version 1.7 4039806998927 5EA6TEF01 19 BELL LED | Order Data LED LED module for SMALL BELL | with transparent or stippled cover LED module incl. optical cover for upgrading existing — microprocessor-controlled LED operating luminaires with conventional lamps electronics; with control functionality for lighting — LED with reflectors, for uniform, asymmetric wide management and monitoring light distribution; additional reduction of light spill to — cover of PMMA the rear due to shielding on building side; with — protection rating: (as luminaire) transparent cover — insulation class: II — service life: up to 80,000h (L85/B10) — recommended mounting height: MH= 3.5…5m Function All versions: with temperature monitoring for protection of LEDs from thermal overload — Basic version: with power reduction via 230V control voltage | no luminous flux constancy — Plus version: with luminous flux constancy over complete service life | with integrated, programmable timer for luminous flux reduction at two levels | settable luminous flux for max. operation and for both reduction levels | all parameters settable via Service Box | on request: can be integrated via SDI into existing digital control systems and controlled from a central control point | alternative luminous flux reduction via 230V control voltage Luminaire can be operated with factory pre-setting. The pre-setting with the Plus version can be modified with the dismantled luminaire Lamps Order No. Order No. OSRAM Siteco with ECG Basic, enclosure, transparent LED 3000 > 80 1350 16 16 9 1.9 4050737762975 5XA1572E1A1 LED 4000 > 70 1600 16 16 9 1.9 4050737763019 5XA1572K1A1 with ECG Basic, enclosure, transparent structured LED 3000 > 80 1370 16 16 9 1.9 4050737783802 5XA1572E1A2 LED 4000 > 70 1630 16 16 9 1.9 4050737783529 5XA1572K1A2 with ECG Plus, enclosure, transparent LED 3000 > 80 1220 15 16 8 1.9 4050737783819 5XA1572E1B1 LED 4000 > 70 1450 15 16 8 1.9 4050737783536 5XA1572K1B1 with ECG Plus, enclosure, transparent structured LED 3000 > 80 1240 15 16 8 1.9 4050737783826 5XA1572E1B2 LED 4000 > 70 1475 15 16 8 1.9 4050737783543 5XA1572K1B2 — please order shielding on building side separately if required Accessories 20 Order No. Order No. OSRAM Siteco shielding on building side 0.2 4050737087979 5NA15700XB1 Siteco® Service Box, for Plus version 1.7 4039806998927 5EA6TEF01 BELL LED | Order Data LED LED module for LARGE BELL | with transparent or stippled cover LED module incl. optical cover for upgrading existing — microprocessor-controlled LED operating luminaires with conventional lamps electronics; with control functionality for lighting — LED with reflectors, for uniform, asymmetric wide management and monitoring light distribution; additional reduction of light spill to — cover of PMMA the rear due to shielding on building side; with — protection rating: (as luminaire) transparent cover — insulation class: II — service life: up to 80,000h (L85/B10) — recommended mounting height: MH= 4…6m Function All versions: with temperature monitoring for protection of LEDs from thermal overload — Basic version: with power reduction via 230V control voltage | no luminous flux constancy — Plus version: with luminous flux constancy over complete service life | with integrated, programmable timer for luminous flux reduction at two levels | settable luminous flux for max. operation and for both reduction levels | all parameters settable via Service Box | on request: can be integrated via SDI into existing digital control systems and controlled from a central control point | alternative luminous flux reduction via 230V control voltage Luminaire can be operated with factory pre-setting. The pre-setting with the Plus version can be modified with the dismantled luminaire Lamps Order No. Order No. OSRAM Siteco with ECG Basic, enclosure, transparent LED 3000 > 80 2590 28 28 14 2.9 4050737762876 5XA1562E1A1 LED 4000 > 70 3180 28 28 14 2.9 4050737762913 5XA1562K1A1 with ECG Basic, enclosure, transparent structured LED 3000 > 80 2620 28 28 14 2.9 4050737783581 5XA1562E1A2 LED 4000 > 70 3220 28 28 14 2.9 4050737783833 5XA1562K1A2 with ECG Plus, enclosure, transparent LED 3000 > 80 2340 25 28 13 2.9 4050737784076 5XA1562E1B1 LED 4000 > 70 2870 25 28 13 2.9 4050737783918 5XA1562K1B1 with ECG Plus, enclosure, transparent structured LED 3000 > 80 2370 25 28 13 2.9 4050737784083 5XA1562E1B2 LED 4000 > 70 2910 25 28 13 2.9 4050737783925 5XA1562K1B2 — please order shielding on building side separately if required Accessories Order No. Order No. OSRAM Siteco shielding on building side 0.1 4050737087955 5NA15600XB1 Siteco® Service Box, for Plus version 1.7 4039806998927 5EA6TEF01 21 BELL LED | Accessories Optical accessories Shielding on building side for both construction sizes | can be retrofitted without tools Type Order No. Order No. OSRAM Siteco For SMALL BELL LED 4050737087979 5NA15700XB1 For LARGE BELL LED 4050737087955 5NA15600XB1 BELL LED mast extension Mounting information: Siteco® bayonet catch The Siteco® bayonet catch enables simple, rapid mounting of the luminaire to the mast extension: insert the luminaire, twist, tighten the fixing screw, done. 'Offset' mast extension Mast mounting element with clamp | twin fixing to mast, fixing with grub screws | steel, galvanised and coated, Siteco® metallic grey (DB 702S)* | suitable for cylindrical masts Type Mast Weight Order No. Order No. spigot: (kg) OSRAM Siteco da (mm) Mast extension for SMALL BELL 1-fold bracket 60 9.8 4039806215055 5NY15711XA08 1-fold bracket 76 10.4 4039806215291 5NY15721XA08 2-fold bracket 76 18.9 4039806215536 5NY15722XA08 Mast extension for LARGE BELL 1-fold bracket 76 11.2 4039806214577 5NY15621XA08 2-fold bracket 76 19.8 4039806214812 5NY15622XA08 *standard luminaire colour Siteco® metallic grey (DB 702S) | other RAL and DB colours on request c a1 200 da c a2 da 22 a1 a2 c SMALL BELL 445 445 829 LARGE BELL 595 595 1040 BELL LED | Accessories BELL LED mast extension 'Inline' mast extension Mast mounting element with ball element | fixing to mast via internal expanding clamp without visible screws | steel, galvanised and coated, Siteco® metallic grey (DB 702S)* | suitable for conical and cylindrical masts b c a1 Type Mast Weight Order No. Order No. spigot: (kg) OSRAM Siteco da (mm) da Mast extension for SMALL BELL a2 1-fold bracket 60 9.8 4039806215215 5NY15711XX08 1-fold bracket 76 10.4 4039806215451 5NY15721XX08 2-fold bracket 76 18.9 4039806370747 5NY15722XX08 c Mast extension for LARGE BELL 1-fold bracket 76/89 11.2 4039806214737 5NY15621XX08 2-fold bracket 76/89 19.8 4039806370624 5NY15622XX08 *standard luminaire colour Siteco® metallic grey (DB 702S) | other RAL and DB colours on request da a1 a2 b c SMALL BELL 360 460 436 829 LARGE BELL 500 610 500 1040 BELL LED mast extension 'Standard' mast extension Mast mounting element with ball element | fixing to mast via grub screws below ball; guidance via tube supports entering into mast | steel, galvanised and coated, Siteco® metallic grey (DB 702S)* | suitable for conical and cylindrical masts b c a e Type 3x M10, 120° Mast Weight Order No. Order No. spigot: (kg) OSRAM Siteco da x l (mm) da Mast extension for SMALL BELL 1-fold bracket 60 x 100 9.7 4039806215130 5NY15711XF08 2-fold bracket 76 x 100 9.9 4039806215376 5NY15721XF08 76/89 10.8 4039806214652 5NY15621XF08 Mast extension for LARGE BELL 1-fold bracket *standard luminaire colour Siteco® metallic grey (DB 702S) | other RAL and DB colours on request a b c e SMALL BELL 450 360 725 115 LARGE BELL 500 465 850 200 23 BELL LED | Accessories BELL LED wall bracket Wall bracket Steel, galvanised and coated, Siteco® metallic grey (DB 702S)* Type No. of Weight Order No. Order No. brackets (kg) OSRAM Siteco Wall bracket for SMALL BELL 1 14.3 4039806214898 5NY15701XW08 Wall bracket for LARGE BELL 1 15.0 4039806214416 5NY15601XW08 * standard luminaire colour Siteco® metallic grey (DB 702S) | other RAL and DB colours on request for SMALL BELL for LARGE BELL ø11 120 ø272 93 ø203 ø60 430 829 ø42 ø9 500 1040 820 610 120 93 Light management Siteco® Service Box, for Siteco LED road luminaires with 'Plus' performance package For parameterising the operating electronics | maximum energy efficiency via individual adaptation of lighting level, switching time and reduction level | setting of static colours and dynamic colour sequences with corresponding luminaires | Service Box includes software* | with plug-in coupling for connection of Y-cable | housing of plastic; plug-in coupling with protection cap | IP54 | insulation class II Type Siteco® Service Box Weight Order No. Order No. (kg) OSRAM Siteco 2.4 4039806998927 5EA6TEF01 — incl. Y-cable for looping the Service Box into luminaire supply cable | incl. 'workshop' cable set for configuring the unmounted luminaire in the workshop; safety plug at one end * adoption of complete colour sequences and software updates possible via PC | incl. mini USB interface for connection to PC Siteco® Architainment Suite pre-installed on Siteco® Service Box; or can be downloaded for free via the following link: www.siteco.com > Service > Downloads > Software > PC-Tools > Architainment Suite 24 BELL LED | Accessories BELL LED spare parts LED replacement gear tray LED gear tray for LARGE and SMALL BELL LED for replacement or upgrading with continued use of cover | with white LEDs with reflectors for homogeneous, asymmetric wide light distribution | microprocessor-controlled LED operating electronics; according to version with differing control function for light management and monitoring Type Weight Order No. Order No. (kg) OSRAM Siteco with ECG Basic, 4000 K 1.6 4050737783598 5XA1572K1A with ECG Plus, 4000 K 1.6 4050737783840 5XA1572K1B with ECG Basic, 3000 K 1.6 4050737762951 5XA1572E1A with ECG Plus, 3000 K 1.6 4050737783857 5XA1572E1B with ECG Basic, 4000 K 2.4 4050737783888 5XA1562K1A with ECG Plus, 4000 K 2.4 4050737783895 5XA1562K1B with ECG Basic, 3000 K 2.4 4050737762852 5XA1562E1A with ECG Plus, 3000 K 2.4 4050737783550 5XA1562E1B Diameter Weight Order No. Order No. Inner di (kg) OSRAM Siteco transparent 304 0.8 4039806440853 5NA14700XG frosted 304 0.8 4039806056016 5NA14701XG LED replacement gear tray for SMALL BELL LED replacement gear tray for LARGE BELL Optical enclosure transparent or frosted | PMMA Type For SMALL BELL For LARGE BELL transparent 385 1.3 4039806440839 5NA14600XG frosted 385 1.2 4039806055958 5NA14601XG 25 BELL LED | Planning Aids Tools for the calculation of outdoor lighting systems The modernisation of obsolete street lighting systems certainly pays. Around 2.7 billion kWh of energy, 1.6 million tons of CO2 and thus 400 million euros are available for this in Germany alone. The quickest way to achieve this is to refurbish obsolete lighting installations with new, energyefficient luminaires and lighting technologies. With Siteco's online calculation programmes you can easily find out which energetic savings potential exists. Our website provides tools such as the Siteco Lighting Tool and a cost efficiency calculator as well as sample installations for such purposes. Sample systems Sample installations are differentiated according to street and urban applications, and are saved as lighting calculations (Relux, Dialux and PDF) based on specifically valid standards. The sample systems are components to support planning, with application suggestions. Cost Efficiency Calculator The Siteco Cost Efficiency Calculator is a web application for evaluating the cost efficiency of two outdoor lighting installations. The installations ('comparison installation' and 'new installation') can be compared over a variable service life in terms of investment costs and operating costs. For evaluating cost effectiveness, the amortisation of an investment over the service life is calculated both statically and dynamically, and displayed in tables and diagrams. This means less work as well as time savings for users with initial concepts, and serves as a basis for analysing power consumption and cost-efficiency (W/m²). Sample projects: www.siteco.com/sample-projects The cost efficiency calculator makes available the following information and services: —a clear comparison of the old and new system —data for investment, operating and energy costs —reliable amortisation calculations —tabular and graphical display of results —simple step-by-step user guidance —creation and saving of individual projects —documentation and download of results as PDF files Cost efficiency calculator: www.siteco.de/wirtschaftlichkeitsrechner-aussen 26 BELL LED | Planning Aids Siteco Lighting Tool This tool enables you to select a product with just a few clicks and to transfer this to RELUX and DIALUX lighting planning programs. Indoor and outdoor product ranges are available. The products can be selected via the catalogue structure (product segment, group or family) or via features (mounting method, lamp type, lamp quantity, control unit etc.). The tool also offers the complete text search as a further search option. Data can be forwarded to DIALUX and RELUX via drag & drop. The Siteco Lighting Tool is currently being expanded with an application search function for indoor and outdoor applications, and is aimed at users with knowledge of lighting planning and specifically valid standards. The tool is intended to provide support when searching for optimal luminaires from the Siteco product spectrum, and provides answers to e.g. the following questions: —Which luminaire meets the specified lighting class with the widest mast spacing? —Which luminaire meets the specified lighting class with the lowest energy consumption per metre? —Which lighting class is met by the luminaire for a specific road arrangement? Results are printed or saved as PDF files. The Siteco Lighting Tool: www.siteco.com/lighting-calculation 27 Order numbers 7QCP025GB | 2112 11.2014 | Technical modifications and errors subject to change. www.osram.com | www.siteco.com OSRAM GmbH Siteco Beleuchtungstechnik GmbH Head office: Head office: Marcel-Breuer-Strasse 6 Georg-Simon-Ohm-Strasse 50 80807 Munich | Germany 83301 Traunreut | Germany Phone +49 89 6213-0 Phone +49 8669 33-0 Fax +49 89 6213-2020 Fax +49 8669 33-397 www.osram.com www.siteco.com Member of