Installation Guide
D3 | accolade · surface mount (F) within cavity · LED
LENS FLUSH WITH PANEL; USE
THIS MOUNTING OPTION WITH
“FINISHED” OPENING
6.00
0.00 3
LED LENGTHS
NOMINAL
LENGTH
LIGHTED
LENGTH
(A)
LED LENGTHS
2
D3 pattern in wood panel
3.000 1
GEAR TRAY
CUSTOM MOUNTING:
TO REDUCE INSTALLATION TIME, CUSTOM MOUNTING CONFIGURATIONS
CAN BE SPECIFIED. THESE ARE APPLICATION SPECIFIC AND WILL BE
COORDINATED THROUGH THE DESIGN ASSIST/APPLICATIONS DEPT.
DRIVER
3.572
1.240 2
REFLECTOR
LENS
SECTION
NOTES, UNLESS OTHERWISE SPECIFIED:
1 CENTER MOUNTING AND POWER FEED HARDWARE WITHIN
THIS AREA FOR TOP SURFACE MOUNTING. BE SURE TO AVOID DRIVER
LOCATIONS.
4
522
633
B
A
POSSIBLE OPTIONS INCLUDE, BUT ARE NOT LIMITED TO:
•
FACTORY DRILLED AND TAPPED POWER FEED
•
FACTORY DRILLED MOUNTING HOLES
•
MOUNTING TABS
•
PRESSED STUDS / CLINCH NUTS
•
MODIFIED ENDCAPS
TO ORDER THIS, USE “C” MOUNTING. SPECIFY DESIRED MODS IN PO;
DESIGN ASSIST/APPLICATIONS WILL SEND SUBMITTAL FOR APPROVAL
DRAWINGS WITHIN 5 BUSINESS DAYS SHOWING MODIFICATIONS AND
NEW PART NUMBER. ONCE DRAWING HAS BEEN SIGNED AND APPROVED,
A NEW PO CAN BE SUBMITTED REFLECTING NEW PART NUMBER.
2 CENTER MOUNTING AND POWER FEED HARDWARE WITHIN
THIS AREA FOR SIDE SURFACE MOUNTING. AREA CENTERED 1.75”
FROM LENS FACE.
23.75
NOMINAL
LIGHTED
3
34.50 OVERALL
35.25
LENGTH LENGTH (A) LENGTH (B)
MOUNTING:
1. REMOVE LENS USING SUCTION CUP THAT IS PROVIDED
2. REMOVE REFLECTOR (PHILIPS) AND GEAR TRAY (#10 HEX)
3. DRILL POWER FEED AND MOUNTING HOLES IN TOP OR SIDE OF
EXTRUSION
4. SECURE TO STRUCTURE (HARDWARE BY OTHERS)
5. CONNECT POWER WHIP USING FIXTURE HOUSING AS JUNCTION BOX
6. REPLACE GEAR TRAY, REFLECTOR AND LENS
3.570
23.00
OVERALL
LENGTH
(B)
46.00
3.3602
57.50
4.8603
69.00
46.360
7
80.25
55
8.1605
8
91.75
66
9.6607
9
102.75
78
1.1608
1089
114.50
2.6609
04.460
1191
131.75
10
115.960
12
143.25
11
127.460
13
154.50
12
138.960
14
166.25
13
150.760
15
177.50
162.260
1
16
189.00
15
179.860
17
200.50
16
191.360
17
203.160
18
212.00
18
214.660
19
223.25
19
226.160
20
235.00
20
237.660
21
252.00
21
249.460
22
263.50
22
260.960
23
275.00
23
272.460
24
286.25
24
283.960
M
Length M-0.75
Length
M-0.75
46.75
4.110
58.25
5.610
69.75
47.110
81.00
8.910
92.50
40.410
103.50
1.910
115.25
3.410
105.210
132.50
116.710
144.00
128.210
155.25
139.710
167.00
151.510
178.25
163.010
189.75
180.610
201.25
192.110
203.910
212.75
215.410
224.00
226.910
235.75
238.410
4252.75
250.210
264.25
261.710
275.75
273.210
287.00
284.710
M M
BOTTOM VIEW, LENS HIDDEN
BOTTOM VIEW, LENS HIDDEN
3 LOCATE POWERFEED WITHIN 6” OF EITHER END.
DISCLAIMER: Installation by licensed electrical
contractor only. Contact a·light with questions.
3728 maritime way oceanside, ca 92056
ph. 760.727.7675
a·light | © oct 2014