YEARS OF INDUSTRY EXPERIENCE.
NOW AVAILABLE GLOBALLY.
Wilson Tool Canada Conventional Press Brake tooling is engineered to meet the needs of Sheet Metal
Fabricators around the world. We have the ability to manufacture high quality Standard or Special Forming
tools in one-piece lengths of up to 20 feet or the same tool in sections of any desirable length.
Our manufacturing processes allow us to produce Conventional Tooling, Standard and Specials at much
closer tolerance than the industry standard. We also have capabilities to manufacture single-piece tooling
in lengths of up to 13 feet with hardness and finishes similar to what you will find with sectionalized
precision tooling.
In addition, Wilson Tool Canada Conventional style Press Brake tooling is available in a variety of styles and
is available for the vast majority of Press Brakes on the market today. If we do not offer a solution that
works for you in our standard tooling line, our design experts will work with you to engineer a solution to
meet your needs.
Manufactured at our facility in Toronto, our Wilson Tool Canada press brake products incorporate years of
industry experience and are now available through the global sales and distribution network of the world’s
leading independent tooling supplier – Wilson Tool.
Terms and Conditions
Order Minimum order is $50.00
Credit Requirements All orders are subject to approval by our Credit Department. If you are a new account, complete a current
credit application form that we will provide.
A credit limit will be imposed on new accounts until credit has been established.
Payment Terms Terms are net 30 days. Catalog prices are subject to change without notice.
Freight Orders are shipped F.O.B. from our manufacturing facility.
Order Cancellation
material.
In the event an order is cancelled, an additional charge will be assessed to cover the cost of labor and
Returned Material A 25% handling/restocking fee will be applied to all standard products returned for credit. A return
authorization form and shipping instructions must be obtained in advance before an item can be returned. No returns are accepted after
3 months.
Claims All claims or product shortages must be made within 30 days of the invoice date.
2
Canada
U.S.A
Tel:800.268.4180
Tel:800.445.4518
Fax: 905.840.1032
Fax:800.539.4590
bending@wilsontoolcanada.com
pressbrake@wilsontool.com
Table of Contents
Standard Tongues Available . . . . . . . . . . . . . . . . . . . . . 4
Typical Press Set Up . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Press Brake Dies . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
88° Block Punches and 89° Dies . . . . . . . . . . . . . . . . . 6
85° Block Punches Dies . . . . . . . . . . . . . . . . . . . . . . . 7
88° / 85° Sash and Gooseneck Punches . . . . . . . . . . . 8
30° Acute Punches and Dies . . . . . . . . . . . . . . . . . . . . 9
Offset and Flattening Dies . . . . . . . . . . . . . . . . . . . . . 10
4 Way Dies and Adapters . . . . . . . . . . . . . . . . . . . . . . 11
Hemming Dies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Radius Punches . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Punch Holders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Deflection Compensating Systems . . . . . . . . . . . . . . . . 14
Custom Hemming . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Offset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
V-Rib / Strengthening Rib . . . . . . . . . . . . . . . . . . . . . 16
General Applications . . . . . . . . . . . . . . . . . . . . . . . . . 17
Forming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Mechanical . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Special Shape Punches / Holders . . . . . . . . . . . . . . . 20
Wiping and Rotary Bending . . . . . . . . . . . . . . . . . . . . 20
Reference Charts . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Multiple Bend Allowances / Tonnage Estimates . . . . . . 23
wilsontool.com is your
online source for the latest
news and information from
Wilson Tool. Available in
seven languages,
wilsontool.com is a great
resource for all of our
customers around the globe.
Canada
U.S.A
Tel:800.268.4180
Tel:800.445.4518
Fax: 905.840.1032
Fax:800.539.4590
bending@wilsontoolcanada.com
pressbrake@wilsontool.com
3
standard tongues available
0.500
[20]
.787
13
0.625
7
0.219
0.625
30
0.750
0.531
0.500
AMERICAN STANDARD
AMERICAN SAFETY
EUROPEAN
WT
(NO SAFETY HOOK)
TYPICAL PREss setup
PUNCH MODIFICATIONS
RAM
Tip modifications are
available in all styles and
sizes.
*Scribe line indicates
the front of the tool.
No charge for Tip Radius
changes up to .250’ and
angle changes.
OPEN
HEIGHT
RISER
BLOCK
DIE MODIFICATIONS
PRESS
BED
Angles can be modified to 80º at no charge.
4
Canada
U.S.A
Tel:800.268.4180
Tel:800.445.4518
Fax: 905.840.1032
Fax:800.539.4590
bending@wilsontoolcanada.com
pressbrake@wilsontool.com
PRESS BRAKE dies
CONVENTIONAL
PRESS BRAKE DIES
Wilson Tool Canada Conventional Press Brake Dies are quality, heat
treated alloy Brake Die steel that is through hardened and heat
treated at approximately 285–300 Brinell (30-Rockwell "C").
Wilson Tool Canada Conventional Dies do not have to be annealed
before machining or re-hardened afterward.
A hooked retainer Tongue is available on special order when multiple
Die sections are required.
AIR BENDING
Air Bending dies are made at a more acute angle than the angle to
be formed. The only contact is between the Dies and material
occurring at the tip of the Upper Punch and the inside edges of the
Lower Die. The material is formed rather than "coined" or "bottomed".
Most Wilson Tool Canada air bending Dies are made with an included
angle of 85°; when forming 90° Flanges in mild steel, the material's
natural springback achieves the 90° angle. To form angles greater
than the Die's included angle, the Ram is adjusted for less Die
penetration.
BOTTOMING / COINING
Bottoming is used when high accuracy and sharp corners are
needed. This process requires three to five times the pressure used
in air bending. Since more tonnage is needed, Bottoming Dies are
seldom used on steel heavier than 12 gauge.
Wilson Tool Canada Bottoming Dies have an included angle of 90°,
and Lower Die capacities are based on eight times the material
thickness. For tighter radii and less springback, the Die opening is
five times the material thickness.
UPGRADE
Upgrade your conventional tooling with the Plane Ground option to
bridge the gap between conventional tooling and precision tooling.
Plane Ground tooling will save you time in setups due to consistent
centerlines. The improved surface finishes will reduce sheet
marking.
Bending thicker material? Our induction hardened option will provide
longer tool life and is recommended when bending thicker materials.
Call our sales desk for more details.
Canada
U.S.A
Tel:800.268.4180
Tel:800.445.4518
Fax: 905.840.1032
Fax:800.539.4590
bending@wilsontoolcanada.com
pressbrake@wilsontool.com
5
88° block punches and 89° dies
1”
1”
11/4”
1/4”
3/8”
1/2”
89°
89°
89°
1/32”
5/8”
1.7
1A
#1
3.7
TYPICAL
R
1/32” 88˚
R
1/64” 88˚
22g-11g
#3-11/4”
R
#2-3/8”
#2-1/2”
1”
1”
1”
10g
11/4”
1”
EH
#
EH
#
1
#
1A
18g
16g
5/8”
3/4”
89°
89°
1/16”
1/16”
1.7
5.1
TYPICAL
1/16”
#2-1/4”
22g
1/16” 88˚
22g-11g
1”
1/32”
EH
3-11/4”
#2-5/8”
#2-3/4”
11/2”
11/2”
14g
13g
7/8”
1
”
89°
89°
1/16”
1/16”
1.7
R
1/32”
R
R
88˚
1/64”
1”
88˚
1/16”
1”
#2-7/8”
#4-1”
11/2”
11/2”
12g
11g
88˚
11/4”
11/4”
89°
11/8”
3/32”
89°
7.1
TYPICAL
1/16”
EXH
#
6
1A
R
R
1/32”
#
1
88˚
1/64”
1.7
EXH
#
3-11/4”
EXH
#4-1
2.2
#4-11/4”
1/8”
11/2”
2”
10g
9g
R
88˚
1/16”
88˚
NOTE
Outside widths shown are Bar Sizes prior to cleanup.
Canada
U.S.A
Tel:800.268.4180
Tel:800.445.4518
Fax: 905.840.1032
Fax:800.539.4590
bending@wilsontoolcanada.com
pressbrake@wilsontool.com
85° BLOCK PUNCHES AND DIES
11/2”
2”
#3-1
#3-2
1/2”
3.7
”
2.2
11/2”
2”
85°
85°
3/32
1/8
3/32
3/16
#4-11/2”
R
1/16” 85˚
10g
1
#4-2”
R
3/32” 85˚
2”
3/16” - 1/2”
2
1/2”
21/2”
3/16”
1/4”
”
3”
21/2”
85°
85°
EH
3-11/2”
EH
3-2”
#
2.2
5.1
1/8
1/8
#
2.7
1/4
#4-21/2”
3/8
#4-3”
3”
R
31/2”
R
1/16”
85˚
10g
3/32”
85˚
3/16” - 1/2”
5/16”
3/8”
2”
11/2”
4”
85°
1/4
1/2
4
1/4
EXH
3-11/2”
7.1
EXH
3-2”
#
#4-4”
#
5”
R
1/16” 85˚
10g
Canada
U.S.A
Tel:800.268.4180
Tel:800.445.4518
1/2”
R
3/32” 85˚
3/16” - 1/2”
Fax: 905.840.1032
Fax:800.539.4590
NOTE
Outside widths shown are Bar Sizes prior to cleanup.
bending@wilsontoolcanada.com
pressbrake@wilsontool.com
7
88°/85°
SASH 1and GOOSENECK
PUNCHES
1
1
1/4”
1/2”
11/4”
1/2”
11/2”
11/2”
EXH
EXH
2”
2”
EXH
EXH
EXH
2”
2”
EXH
EXH
EXH
EXH
EXH
7.1
EH
EH
7.1
EH
EH
5.1
#
5.1
6 -1/4”
#
EH
#
EH
6 - 3/8”
6 -1/4”
#
EH
#
EH
6 -1/2”
6 - 3/8”
#
EH
#
6 -1/2”
EH
9 - 3/4”
#
#
9 - 1”
9 - 3/4”
#
9 - 1”
3.7
11/8”
3.7
R
0.25
1/64”
R
R
0.25
1/64”
88°
22g
R
88°
88°
18g
14g
85°
#
7A
9g
3”
3”
7B
#
3.7
21/2”
2”
7C
1” R
21/2”
1/2” R
4.2
7C
#
3.7
2”
88°
10g
7B R
1/2”
7/16” R
1.00
1/16”
85°
#
7/16” R
88°
R
0.75
3”
7A
1.00
1/16”
3”
21/2”
#
1/16”
R
0.75
R
0.50
1/32”
21/2”
#
1/16”
88°
R
0.37
R
0.50
1/32”
88°
1/32”
7/8”
11/16”
0.37
1/32”
88°
R
11/8”
9/16”
7/16”
7/8”
11/16”
9/16”
7/16”
5.2
1” R
25/8”
4.2
5.2
R
25/8”
0.43
1/32”
R 88°
1/32”
16g
R
0.43
0.75
1/16”
R 85°
1/16”
12g
88°
0.75
R
1.00
3/32”
85°
R 85°
3/32”
1.00
10g
85°
NOTE
Outside widths shown are Bar Sizes prior to cleanup.
8
Canada
U.S.A
Tel:800.268.4180
Tel:800.445.4518
Fax: 905.840.1032
Fax:800.539.4590
bending@wilsontoolcanada.com
pressbrake@wilsontool.com
ACUTE PUNCHES AND DIES
1”
11/2”
11/2”
11/2”
EXH
EXH
EXH
EXH
EH
EH
EH
EH
7.1
5.1
#
3.7
23
7/8”
23
5/8”
#
#
21
23
11/4”
#
1/16”
R
1/32”
R
1/16”
R
28°
22g - 16g
14g - 12g
30°
1/4
28°
30°
3/8
”
”
3/32”
R
28°
28°
14g - 12g
11g
30°
30°
1/2
5/8
”
30°
7/8 ”
”
2.2
1.7
20 1/4”
20 3/8”
#
#
1”
22g
20 1/2”
#
1”
1”
18g
16g
#
22 - 5/8”
#
1 1/2”
22 - 7/8”
2”
14g
12g
30°
30°
30°
1”
1 1/4”
1 1/2”
Dotted lines indicate
the Heavy Duty
concept - available
on all Acute dies.
2.7
#
Canada
U.S.A
Tel:800.268.4180
Tel:800.445.4518
22 - 1”
#
22 - 11/4”
#
22 - 11/2”
2”
2 1/2”
3”
11g
10g
7g
Fax: 905.840.1032
Fax:800.539.4590
bending@wilsontoolcanada.com
pressbrake@wilsontool.com
NOTE
Outside widths
shown are Bar Sizes
prior to cleanup.
9
OFFSET AND FLATTENING DIES
For producing two 90° bends simultaneously.
OFFSET
#
#
2.7
2.7
10
10
45°
45°
30°
30°
60°
60°
C
C
R
R
#
#
2.7
2.7
12
12
#
#
R
R
45°
45°
C
C
10
10
SET #
ANGLE
B
C
R
#10 - 3/16”
30º / 60º
1”
3/16”
1/64”
#12 - 1/4"
90º
1"
1/4"
1/64"
#12 - 5/16"
90º
1"
5/16"
1/64"
#12 - 3/8"
90º
1-1/4"
3/8"
1/32"
#12 - 1/2"
90º
1-1/4"
1/2"
1/32"
#12 - 5/8"
90º
1-1/2"
5/8"
1/32"
#12 - 3/4"
90º
2"
3/4"
1/32"
#12 - 7/8"
90º
2"
7/8"
1/32"
#12 - 1"
90º
2"
1"
1/32"
12
12
#
#
B
B
A set consists of Top and Bottom
B
B
FLATTENING
2.7
2.7
#
#
16
16
#
#
18
18
30°
30°
SET #
B
C
#16 - 1-1/2"
1-1/2"
NA
#16 - 2"
2"
NA
#16 - 2-1/2"
2-1/2"
NA
#18 - 2"
1-7/8"
1/2"
#18 - 2-1/2"
2-3/8"
3/4"
A set consists of Top and Bottom
3/16”
3/16”
2.7
2.7
#
#
16
16
#
#
18
18
C
C
NOTE
Outside widths shown are Bar Sizes prior to cleanup.
B
B
10
B
B
Canada
U.S.A
Tel:800.268.4180
Tel:800.445.4518
Fax: 905.840.1032
Fax:800.539.4590
bending@wilsontoolcanada.com
pressbrake@wilsontool.com
4-WAY DIES AND ADAPTERS
21/4” SQ.
89°
89°
89°
#
4A4
85°
11/8” 89°
1”
7/8”
3/4”
#
31/4” SQ.
23/4” SQ.
11/2”
89°
4C4
#
4B4
85°
85°
85°
2”
89°
7/8”
21/2”
85°
11/8”
NOTE: HOLDER REQUIRED,
or alternative method of securing
die should be considered.
85°
11/2”
Special angles and configurations
are made to order.
51/4” SQ.
11/8”
All are supplied with tapped holes on
each end for lifting.
85°
89°
#
#
4D4
85°
2”
11/2”
35/8” SQ.
For quick die changes where multiple
bends are required.
85°
4E4
85°
3”
85°
4”
85°
85°
11/2”
2”
4-WAY DIE ADAPTERS
Holder
H
OW
DW
4A
2.0
3.5
2.28
4B
2.0
4.0
2.78
4C
2.5
4.5
3.28
4D
2.5
5.0
3.65
4E
2.5
6.5
5.28
DW
H
Screw holes in 4-way adapters are 3/8" 16 on 12" centres.
Specify if tongue required.
OW
Canada
U.S.A
Tel:800.268.4180
Tel:800.445.4518
Fax: 905.840.1032
Fax:800.539.4590
bending@wilsontoolcanada.com
pressbrake@wilsontool.com
11
HEMMING DIES / RADIUS PUNCHES
11/4”
11/4”
#
34
#
34
HEMMING DIES
For bending and crimping the edge of
a sheet 18 gauge or lighter.
3.7
3.7 30°
30°
1/32” R
For hemming material heavier than
18 gauge refer to the specials catalog
Two strokes produce a Flattened Hem.
1/32” R
2.2
#
35
2.2
#
35
11/2”
11/2”
RADIUS PUNCHES
Radius (R) to be specified.
60°
60°
60°
60°
R
R
R
12
R
Canada
U.S.A
Tel:800.268.4180
Tel:800.445.4518
Fax: 905.840.1032
Fax:800.539.4590
bending@wilsontoolcanada.com
pressbrake@wilsontool.com
PUNCH HOLDERS
W
W1
.50”
RA1
W
RA2
RA3
W2 H
H
H
1.75”
Part
#
W1
Width
W2
Width
RA1
1-1/2"
.62"
H
Available Height
3-5/8"
4-1/8"
Part
#
W
Width
5-1/8"
RA3
2"
H
Available Height
3-1/8"
3-5/8"
4-1/8"
5-1/8"
RA1
2"
1"
3-5/8"
4-1/8"
5-1/8"
RA3
2-1/2"
3-1/8"
3-5/8"
4-1/8"
5-1/8"
RA1
2-1/2"
1-1/4"
3-5/8"
4-1/8"
5-1/8"
RA3
3"
3-1/8"
3-3/4"
4-1/8"
5-1/8"
Part
#
W
Width
RA2
1-1/2"
3-1/8"
3-5/8"
4-1/8"
5-1/8"
RA2
2"
3-1/8"
3-5/8"
4-1/8"
5-1/8"
RA2
2-1/2"
3-1/8"
3-5/8"
4-1/8"
5-1/8"
RA2
3"
3-1/8"
4-1/8"
5-1/8"
5-1/8"
H
Available Height
NOTE
Any Punch Holder with a width
of 2" or greater can be made to
accept a Hook/Safety Tang.
EXTRA HIGH GOOSENECK punch holder
CLEAN UP 4”
DEEP PUNCH
RAM ADAPTER
MAX. 20 Tons/Ft
NOTE
Extra High Gooseneck Punch Holders can be
manufactured to accept insert style punches this allows for a larger inside dimension to be
formed.
7.125
Almost any size punch or die adapter can be
made. Contact our sales desk for price and lead
time.
In
si
de
6
Di .5
m
en
si
on
n
sio
5 n
4. me
Di
de
si
In
Canada
U.S.A
Tel:800.268.4180
Tel:800.445.4518
Fax: 905.840.1032
Fax:800.539.4590
bending@wilsontoolcanada.com
pressbrake@wilsontool.com
13
DEFLECTION COMPENSATING SYSTEMS
STANDARD DEFLECTION COMPENSATING TABLE
WITH MANUAL DRIVE
FRONT GAUGE WITH
4 TILTING STOPS
PR4000MICR
146
1000
124
78
90
3.543
270
RR4000NORM
146
5.748
Eliminate shimming press brake tooling by using the
manual deflection compensating die holder. A
common problem with press brake forming is the
upper ram deflecting away from the lower bed while
under load, resulting in the bend being open in the
middle.
MATERIAL NO.
8 foot
980780
10 foot
980600
12 foot
980601
14 foot
980602
Custom sizes available as Make-To-Order.
SPRING LOADED
CLAMPING PLATE
.53”
13.5mm
9.76”
248mm
8 / 10 / 12 / 14 FT.
2500 / 3100 / 3700 / 4200mm
3.9”
100mm
3.5”
90mm
PRESS BRAKE BED
Localized adjustments every 8 inches
allows fine adjustments for more
precise bends.
Calibrated dial insures repeatable
set-ups.
14
Canada
U.S.A
Crank for full length adjustment to
compensate for press deflection.
Revolution counter insures repeatable
set-ups.
Tel:800.268.4180
Tel:800.445.4518
Fax: 905.840.1032
Fax:800.539.4590
bending@wilsontoolcanada.com
pressbrake@wilsontool.com
CUSTOM HEMMING
AH1
HDH1
This set is typically used
to form seams in excess
of 1/2 inch.
Heavy duty hemming
for thick gauge
applications.
SSH1
This set is used to form
a standing seam in 2
strokes.The first stroke
forms an acute angle
offset, the second stroke
closes the seam.
SH1
Standing seam closing die.
3TD
Max. material = 16g crs
Hit #1
SSH2
Hit #2
Fold Flatten 90º Bend
GH1
Fold Flatten Horizontal
Canada
U.S.A
Tel:800.268.4180
Tel:800.445.4518
Fax: 905.840.1032
Fax:800.539.4590
bending@wilsontoolcanada.com
pressbrake@wilsontool.com
15
OFFSET
SSH2
AO1
This set is used when forming
offsets that are approximately
one material thickness. Prevents
material whip up. Thrust plates
and adjustable back gauging are
provided.
This set is used
for offset forms
when odd or uneven
angles are required.
LO1
This set is used for
heavy gauge, large offset
bending.
V-RIB / STRENGTHENING RIB
VR1
SR1
These sets produce a
v-rib in one stroke.
Spring back allowance
is built in.
16
These sets produce a
strenghtening rib in one
stroke.
Spring back allowance
is built in. Closed end
and open end ribs are
available.
Canada
U.S.A
Tel:800.268.4180
Tel:800.445.4518
Fax: 905.840.1032
Fax:800.539.4590
bending@wilsontoolcanada.com
pressbrake@wilsontool.com
GENERAL APPLICATIONS
Up to 60º
Max
ROLLING SHOULDER DIE
ADJUSTABLE V DIE
Ideal for extreme wear conditions
created when forming heavy plate
and abrasive materials.
Ideal for extreme wear conditions created when
forming heavy plate and abrasive materials.
Replaceable inserts eliminate the
need for replacing the entire die
when the die shoulders wear.
Available in multiple V sizes and
75º and 85º configurations
Replaceable inserts eliminate the need for replacing
the entire die when the die shoulders wear.
Available in multiple V sizes and 75º and 85º
configurations
V opening quickly adjusts in 1” increments
For more detail see the Thick Material Solutions
Flyer on our website.
LR1
LR3
This is a bottoming radius set
with spring-back allowance built
in. It is manufactured to form
a radius in a specific type and
thickness of material for tight
tolerance requirements.
This set is used when the
return flange starts at the
radius end. May require
multiple strokes.
Canada
U.S.A
Tel:800.268.4180
Tel:800.445.4518
Fax: 905.840.1032
Fax:800.539.4590
bending@wilsontoolcanada.com
pressbrake@wilsontool.com
Multi Hit Rad
17
FORMING
A large variety of custom forming
sets are available.
Custom built to suit any specific
requirement.
Call for specific application
requirements.
W1
RB1
This set is used when
minimum return flange
clearance is required.
These sets provide nesting for the
rod during the forming process.
18
Canada
U.S.A
Tel:800.268.4180
Tel:800.445.4518
Fax: 905.840.1032
Fax:800.539.4590
bending@wilsontoolcanada.com
pressbrake@wilsontool.com
MECHANICAL
CL2
UC1
CURL TOOL SET
One tool set used
to create curls in 3
strokes
CL3
These sets are used for
hinges and corner beading.
These sets are required for deep
channels when the channel bottom
needs to remain flat.
UC3
These sets are
recommended for
applications where
considerable spring
back is encountered.
M-102
ANCHOR DIE SPRING
BLUE - 3/8 X 2
HT1
C2
These sets provide
straight wall or
angled wall hat
channel bending in
one stroke.
Secondary flattening
operations may be
required.
C4
Spring back
allowance is built in.
Canada
U.S.A
Tel:800.268.4180
Tel:800.445.4518
Fax: 905.840.1032
Fax:800.539.4590
bending@wilsontoolcanada.com
pressbrake@wilsontool.com
19
SPECIAL SHAPE PUNCHES / HOLDER
PR2
PR3
Punch Holder
Die Holder
Available in all mounting tang styles.
WIPING AND ROTARY BENDING
WD1
20
WO1
Canada
U.S.A
RB1
Tel:800.268.4180
Tel:800.445.4518
Fax: 905.840.1032
Fax:800.539.4590
bending@wilsontoolcanada.com
pressbrake@wilsontool.com
Wilson American Precision style tooling incorporates
a one-of-a-kind design that’s faster loading and more versatile
than any other American style press brake tooling available
today.
Longer tool life, less scrap and quick set-ups make
Wilson Tool European Style Press Brake Tooling
a great choice for fabricators worldwide.
With WT Style Precision™ press brake tooling,
Wilson Tool has developed extremely durable tooling
that significantly improves your press brake productivity
with faster tool changes.
Thick Material Solutions
From conventional press brake tooling
to Ironworker punches, Wilson Tool has
solutions to address the most demanding
applications.
PRESS BRAKE SPECIALS
No matter how unique your tooling needs, Wilson Tool can design and
manufacture press brake tooling to your specifications. If you have
a challenging bending and forming application, our industry-leading
experts will work with you to create the ideal tooling solution.
Canada
U.S.A
Tel:800.268.4180
Tel:800.445.4518
Fax: 905.840.1032
Fax:800.539.4590
bending@wilsontoolcanada.com
pressbrake@wilsontool.com
21
REFERENCE CHARTS
30/60
When forming a four-sided box, the punch
must be sufficient height to prevent the preformed side from striking the upper beam.
Recommended for up to 16g.
2-1/2” RAM
)
LS
1”
D
SI
7”
IN
E
X
BO
(
TH
P
E 6”
D
T
IN
5”
4”
3”
2”
1”
1-9/16”
2-31/32”
4-13/32”
5-13/16”
7-7/32”
BOX FORMING
Punch and die showing height requirements
for different depths of box forming.
8-5/8”
12” SHUT HEIGHT (CLOSED) - STROKE DOWN, ADJUSTMENT UP
VA
ER
10-1/16”
1” MAX. OPENING
1” HIGH
22
Canada
U.S.A
Tel:800.268.4180
Tel:800.445.4518
Fax: 905.840.1032
Fax:800.539.4590
11-15/32”
bending@wilsontoolcanada.com
pressbrake@wilsontool.com
MULTIPLE BEND ALLOWANCES / TONNAGE ESTIMATES
FORMULA FOR MAKING MULTIPLE BENDS ON A PRESS BRAKE
Press Brake Multiple Bend Allowances
and Tonnage Estimates
For shape as show, in mild steel with radii equal the metal thickness unless otherwise noted.
Formula for making multiple bends on a press brake. For shape as shown,
in mild steel
with radii
equal the metalby
thickness
unless=otherwise
Multiply
metal
thickness
Factor
Tons noted.
Per Ft.
Multiply Metal thickness By Factor = Tons Per Ft.
SHAPE
DESCRIPTION
AIRFORM
BOTTOMING
VEE DIE
60
150
WIPING
---
250
OFFSET
150
300/600
MT’L THK
OFFSET
300
600
CHANNEL
225
300
VEE RIB
200
600
W DIE
300
600
OPEN HAT
CHANNEL
300
450
SQ HAT
CHANNEL
---
600
PREFORM
CURL
---
300
PREFORM
CURL
---
200
CLOSE CURL
---
300
RADIUS
---
180/300
Large Radii
Angle Variation
Concave or
Convex Sides
Mat’l Thk. Radii
Min. Angle
Variation
Maintain
Flatness
Shape Considerations
Stainless Steel (18-8 Annealed) Type 304 . . . . . . 1.55
Aluminum
3303-H14 (1/2Hard) . . . . . . . . . . .35
5052-H34 (1/2 Hard) . . . . . . . . . .65
6061-T64 . . . . . . . . . . . . . . . . . .75
Brass
70/30 (1/2 Hard) . . . . . . . . . . . . 1.10
Canada
U.S.A
Tel:800.268.4180
Tel:800.445.4518
Fax: 905.840.1032
Fax:800.539.4590
bending@wilsontoolcanada.com
pressbrake@wilsontool.com
23
Wilson Tool International
WORLD HEADQUARTERS
EUROPE / MIDEAST / AFRICA
Wilson Tool International - United States
Wilson Tool - United Kingdom
Tel (Free): 800-328-9646 | Tel: 651-286-6001
Fax (Free): 800-222-0002 | Fax: 651-286-5959
Email: sales@wilsontool.com
Tel (Free): 0800-373748 | Tel: +44 1793 831818
Fax (Free): 0800-373758 | Fax: +44 1793 831945 or 46
Email: sales@wilsontool.eu.com
NORTH AMERICA
Wilson Tool - Germany
Wilson Tool - Canada
Tel (Free): 00800-9457668665 | Tel: +49 5723 747 0
Fax (Free): 00800-945766329 | Fax: +49 5723 747 10
Email: verkauf@wilsontool.eu.com
Punching and Stamping Division
Tel: 800-268-5573 | Fax: 800-668-9314
Email: punching@wilsontoolcanada.com
Wilson Tool - Canada
Press Brake Division
Tel: 800-268-4180 | Fax: 905-840-1032
Email: bending@wilsontoolcanada.com
Wilson Tool - Denmark
Tel (Free): 80 20 20 24 | Tel: +45 44 53 1699
Fax (Free): 80 20 20 26 | Fax: +45 44 53 0607
Email: sales@wilsontool.dk
Wilson Tool - France
Wilson Tool - Mexico
Tel: +33 (0) 164 13 47 80 | Fax: +33 (0) 164 13 47 81
Email: ventes@wilsontool.eu.com
Tel: 52 (81) 8865-4820 | Fax: 52 (81) 8865-4599
Email: americalatina@wilsontool.com
Wilson Tool - South Africa
SOUTH AMERICA
Wilson Tool - Argentina
Tel: +54 114 7920056
Email: ventasargentina@wilsontool.com
Tel: +27 11 849 1955 | Fax: 086 657 8629
Email: simon.penney@wilsontool.com
Toolspress - Italy
Tel: +39 0521 850510 / 850677
Fax: +39 0521 850796
Email: info@toolspress.com
Milling Puncionadeiras - Brazil
Tel/Fax: 55 11 5621-2100
Email: vendas@milling.com.br
CHINA / PACIFIC RIM
Wilson Tool - China
Tel: +86 21 51089638 | Fax: +86 21 64422195
Email: sales@wilsontool.cn
E601C
2014
© 2014 Wilson Tool International®