Vak Pak Replacement
Parts Catalog
Vak Pak Builders Supply, Inc.
9731-1 Beach Blvd. / Jacksonville, FL 32246
Ph: 904-642-2267 / Fax: 904-641-2012
Toll Free: 888-682-5725 / E-mail: parts@vakpak.com
Web Site: www.vakpak.com
1
Table Of Contents
Page #’s
Contents
2
Table of Contents
3
Introduction to Vak Pak Builders Supply, Inc.
4
Gauges, Thermometer, Filter Cartridges and Grids
5
Flowmeters
6-9
10-11
IG / IG3 Pumps, Pump Curves, and Replacement Parts
Push Pull Valves and Replacement Parts
12
Spin Valves
13
Crank Style Valve Repair kits, and Misc. Valves
14-15
FWLC (Float Water Level Control)
16-17
RWLC (Reservoir Water Level Control)
18-19
DP100 (Dynapure 100 & 150 SF Filter)
20
Vak Pak 84SF Separator Tank
21
Chlormatic and Bromatic Replacement Parts
22
Chlorine and PH Controllers and Liquid Feeders
23
Remote Chemical Storage Crocks
24
Cabinet Replacement List By Model Number
25-26
Cabinet Replacement Parts
27-39
Cabinet Specifications
39
40-42
Collector Tank Skirt, Cabinet Identification
Main Drains, VGB Compliant
43
Main Drain Model Identification
44
Grates & Unblockable Drains, VGB Approved
45
Terms & Conditions
2
Gauges and Thermometers
Model
Number
Description
21003
Vacuum Gauge 0-30 PSI 2”
21001
Pressure Gauge 0-60 PSI 2” Back
Mount
21002
Pressure Gauge 0-60 PSI 2” Bottom
Mount
Model
Number
21100
Description
Thermometer, 2-1/2” In Line
D.E. Grids
Model
Number
FC-9740
33860
Description
33850
Grid, DE 19” Round
33860
Spacer for DE Element
FC-9740
13.5” Anthony Rectangular Grid
FC-9750
17.5” Anthony Rectangular Grid
Vak Pak Builders Supply stocks a
full line of replacement elements
& D.E. Grids for many
popular filters.
33850
FC-9750
3
Flowmeters
Part
Number
Description
Part
Number
Description
20650
1 1/2” Blue White
82222
2” Digital Readout
20700
2” Blue White
82291
2-1/2” Digital Readout
20750
2 1/2” Blue White
82319
4” Digital Readout
20800
3” Blue White
83320
3” Remote Readout
20850
4” Blue White
82320
4” Remote Readout
Battery Powered
Digital Readout
Battery Powered
Remote Readout
20900
6” Blue White
20725
Mecomatic 2”
20905
8” Blue White
20915
Mecomatic 2 1/2”
20910*
Chlorinator 1/2”
MPT
20920
Mecomatic 3”
20911
Chlorinator
W / 90 Both Ends
20930
Mecomatic 4”
209102
Base, 1/2” MPT For
20910
Mecomatic
Pt. Number
20910
Base is now
1/2” MPT
Pt. Number
20911
Blue White
4
Vak Pak IG / IG3 Pumps
“IG” and “IG3”
Vak Pak’s “IG” and “IG3” cast iron centrifugal pumps have been designed for general
water recirculation. The motor is easily withdrawn by removal of accessible bolts, which
provide access to the impeller without disturbing existing piping.
“IG”
The “IG” uses a standard 1750 RPM motor, and is available from 5 hp through 10 hp.
The IG pump comes with 4” FPT suction, and 3” FPT discharge ports.
“IG3”
The “IG3” uses a standard 1750 RPM motor, and is available from 5 hp through 7.5 hp.
The IG3 pump comes with 3” FPT suction, and 2-1/2” FPT discharge ports.
We also stock standard square & round flange pump
motors, from 1-HP to 3-HP.
5
“IG” and “IG3” Series Pump Curves
TOTAL DYNAMIC HEAD IN FEET
“IG” SERIES
CAPACITY IN U.S. GALLONS PER MINUTE
“IG-3” SERIES
6
IG (4”x 3”) and IG3 (3”x 2-1/2”) Pumps
Model
Number
Replacement Pump
Description
38720
IG 5hp 1 phase
38722
IG 5hp 3 phase
38724
IG 7 1/2 hp 1 phase
38726
IG 7 1/2 hp 3 phase
38730
38727
Model
Number
Replacement Pump
Description
38704
IG3 5 hp 1 ph
38706
IG3 5 hp 3 ph
38708
IG3 7 1/2 hp 1 ph
IG 10 hp 3 phase
38710
IG3 7 1/2 hp 3 ph
IG Pump End / Less Motor
38729
IG3 Pump End / Less Motor
Please Note: Pumps motors are available in straight 200V / 1PH., for an additional charge.
IG and IG3 Replacement Parts
See page 8 for the complete listing of replacement parts.
7
IG / IG3 Replacement Parts
Number
Model Number
Description
1
38578
Motor, 5 hp, 1 ph
1
38584
Motor, 5 hp, 3 ph
1
38590
Motor, 7 1/2 hp, 1 ph
1
38596
Motor, 7 1/2 hp, 3 ph
1
38606
Motor, 10 hp, 3 ph
2
38556
Motor Bracket, JM small bolt face
(5-HP 3-Phase Only)
2
38546
Motor Bracket, JM, IG/IG3
3
38522
Volute, IG 4” suction, 3” discharge
3
38524
Volute, IG3 3” suction, 2 1/2” discharge
3
38516
Volute Gasket
4
38536
IG Impeller (Need to specify flow rate or trim)
4
38530
IG3 Impeller, 9”
(Need to specify flow rate or trim)
4
38528
Impeller trim and balance
5
38504
Seal Kit, IG
6
29375
Impeller Bolt, ss, IG, 3/8” x 1
6
38518
Impeller Washer, ss, 3/8”
6
38505
Impeller Gasket, IG
7
38502
Shaft Sleeve, All IG / IG3 Pumps
7
38501
Shaft Sleeve Gasket, IG/IG3
7
38507
O-Ring, shaft sleeve, IG/IG3
8
29375
Capscrew, 3/8” x 1” ss
8
29604
3/8” Lock washer ss
9
29380
Capscrew, 1/2” x 1” ss
9
29610
1/2” Lock washer ss
10
14040
Plug, 1/4” brass
11
13950
Air Relief, 1/4” brass
12
14080
Plug, 1/2” brass
8
Push Pull Valves & Replacement Parts
Vak Pak old style push pull valves used a 3/8”
stainless steel shaft, while the new style valves
use a P.V.C. shaft. Contact Vak Pak for
assistance when converting these valves.
****ALSO NOTE****
Be Sure To Specify When Ordering
Repair Kits
Old Style (S.S. Threaded rod - center shaft)
or
New Style (PVC center shaft)
Number
Model Number
Description
1
39420
4” Push Pull Valve Complete
1
39440
6” Push Pull Valve Complete
1
39460
8” Push Pull Valve Complete
1
39470
10” Push Pull Valve Complete
2
38947
3” Internal Assembly
2
38956
4” Internal Assembly
2
38957
6” Internal Assembly
2
38958
8” Internal Assembly
2
38959
10” Internal Assembly
3
38949
3” Repair Kit, New Style
3
38950
4” Repair Kit, New Style
3
38952
6” Repair Kit, New Style
3
38954
8” Repair Kit, New Style
3
38961
10” Repair Kit, New Style
4
38948
3” Repair Kit, Old Style
4
38951
4” Repair Kit, Old Style
4
38953
6” Repair Kit, Old Style
4
38955
8” Repair Kit, Old Style
5
38469
Pin W/Safety Cable
9
Spin Valves
Ref #
Part Number
Description
1
39475
Spin Valve Assembly 10”
1
39485
Spin Valve Assembly 12”
2
82157
Handwheel
3
35756
Shaft Assembly
4
35754
Body Assembly
5
35757
Repair Kit 10”
5
35759
Repair Kit 12”
IMPORTANT NOTE:
SPIN VALVES ARE INTENDED TO BE USED AS A REPLACEMENT ONLY FOR
VAK PAK SYSTEMS THAT UTILIZE THIS VALVE. VAK PAK, INC. IS NOT
RESPONSIBLE FOR THE FUNCTION OF THESE
VALVES IN ANY OTHER APPLICATION.
10
Crank Style Valve Repair Kits
Part #
Description
34364
4” Crank Style Repair Kit
34362
6” Crank Style Repair Kit
34363
8” Crank Style Repair Kit
Valves
See Following Pages for Complete List of Valves Available
11
Valves Cont.
Hose Bibbs
10149
10160
10150
HOSE BIBB, 1/2" MPT BRASS
HOSE BIBB, 3/4" FPT BRASS
HOSE BIBB, 3/4" MPT BRASS
PVC Ball Valves
23285
23287
23290
10299
10300
10260
10280
10285
VALVE, BALL PVC 1/2"
VALVE, BALL PVC 3/4"
VALVE, BALL PVC 1"
VALVE, BALL PVC 1-1/4"
VALVE, BALL PVC 1-1/2"
VALVE, BALL PVC 2"
VALVE, BALL PVC 2-1/2"
VALVE, BALL PVC 3"
10287
VALVE, BALL PVC 4"
Praher 2-Way Valves
09907
VALVE, PC 2-WAY 1-1/2"
09909
VALVE, PC 2-WAY 2-1/2"
Praher 3-Way Valves
09908
VALVE, PC 3-WAY 1-1/2"
09910
VALVE, PC 3-WAY 2-1/2"
09912
VALVE, PC 3-WAY 2-1/2 W/1.5 BS
Pentair 2-Way Valves
263038
263029
263038
263029
VALVE, PF 2-WAY 1.5"
VALVE, PF 2-WAY 2.5"
12
Valves Cont.
Pentair 3-Way Valves
263037
263028
263037
263028
VALVE, PF 3-WAY 1.5"
VALVE, PF 3-WAY 2.5"
Jandy 2-Way Valves
09800
09830
1157
2876
VALVE, JANDY 2-WAY 1.5"
VALVE, JANDY 2-WAY 2.5"
Jandy 3-Way Valves
09850
09860
1154
2875
VALVE, JANDY 3-WAY 1.5"
VALVE, JANDY 3-WAY 2.5"
Jandy 2-Way Neverlube
09885
09895
4724
4716
VALVE, JANDY 2-WAY 1.5" NEVER
VALVE, JANDY 2-WAY 2.5" NEVER
Jandy 3-Way Neverlube
09890
09897
4715
4717
VALVE, JANDY 3-WAY 1.5" NEVER
VALVE, JANDY 3-WAY 2.5" NEVER
Actuators For 2 & 3-Way Valves
263045
ACTUATOR, PENTAIR INTELLITOUCH
13
Valves Cont.
PVC Butterfly Valves
10512
10517
10522
10527
02582
02583
02586
02587
VALVE, BUTTERFLY
VALVE, BUTTERFLY
VALVE, BUTTERFLY
VALVE, BUTTERFLY
3" PVC AST
4" PVC AST
6" PVC AST
8" PVC AST
LARGER BUTTERFLY VALVES ARE AVAILABLE AS A SPECIAL ORDER
Spring Check Valves PVC
10482
10484
10485
9112S
9114S
9115S
VALVE, CHECK PVC 1" SPRING
VALVE, CHECK PVC 1-1/2" SPRING
VALVE, CHECK PVC 2" SPRING
Swing Check Valves PVC
05340
05350
05400
05450
1520-15
1520-20
1520-30
1520-40
VALVE, CHECK PVC 1-1/2" SWING
VALVE, CHECK PVC 2" SWING
VALVE, CHECK PVC 3" SWING
VALVE, CHECK PVC 4" SWING
True Union Clear Spring Check Valves
05425
1700C30
VALVE, CHECK PVC 3" TU/CL/SP
Specialty Check Valves
09900
09905
263042
7235
7305
263042
VALVE, JANDY CHECK 1-1/2"
VALVE, JANDY CHECK 2-1/2"
VALVE, PENTAIR CHECK 2" STRAIGHT
Vak Pak stocks a wide selection of valves.
Can’t find what you’re looking for? Contact our parts dept.
14
FWLC
(Float Water Level Control)
Number
Model Number
Description
1
38901
1/2” Complete Float Water Level
Control
1
38902
1” Complete Float Water Level
Control
2
39010
24” Float Tee with Balls
2
39020
31” Float Tee with Balls
2
39022
36” Float Tee with Balls
5
39040
10” Float Rod with coupling
6
39060
14” Float Rod with coupling
8
38880
1/2” Guide Tee with Cap
9
37200
Float Ball
10
39500
1” Aluminum float coupling
13
10100
1/2” Valve - only
14
10110
1” Valve - only
If you have any questions about the installation, or set-up of the FWLC, please contact
Technical Support, at our parts department.
15
RWLC
(Reservoir Water Level Control)
Ref.
Number
Model
Number
Description
1
38929
RWLC Float Assembly
1A
38906
Valve, Float Reservoir Assembly
2
38932
1” Diaphragm Valve With Pipe
3
26520
Diaphragm Valve Only 1”
4
38907
Valve, Replacement Reservoir
5
27170
1/4” O.D. Black Tubing
6
13850
1/4” Plastic Sleeve (Not Shown)
***
38927
RWLC 1” Hydro Assembly Complete (includes reference #’s 1 - 6)
If you have any questions about the installation, or set-up of the RWLC, please contact
Technical Support, at our parts department.
16
RWLC Replacement Parts
Number
Model Number
Description
1
38929
RWLC Float Assembly
1A
38906
Valve, Float Reservoir Assembly
2
38932
1” Diaphragm Valve With Pipe
3
26520
Diaphragm Valve Only 1”
4
38907
Valve, Replacement Reservoir
5
13850
1/4” Plastic Sleeve
6
27170
1/4” O.D. Black Tubing
***
38927
RWLC 1” Hydro Assembly
Complete
(includes reference # 1, 2, 5 & 6)
Directions on Setting RWLC






Turn off the circulation pump, fill pool to desired level.
Loosen 1/2” compression nut (B) and slide reservoir up or down until the top rim of the
float chamber is just above the static water level.
Tighten the compression nut until secure.
Open the black diaphragm valve, counter clockwise, at least two (2) turns.
Press down on float ball in the float chamber.
Fresh water should begin to flow into the tank. When the float is released, the water flow
should stop.
17
Dynapure Filter Replacement Parts
Ref #
Part #
Description
1
35750
Element, 100 sq. ft. Dynapure
1A
35751
Element, 150 sq. ft. Dynapure
2
34540
DP, Element Core Holder
3
34340
Base, DP White
4
34490
Dome, DP White
5
34380
O-Ring, Tank Body
6
82167
Air Relief, DP Plastic W/O-ring (NEW STYLE)
6
13950
Brass Air Relief 1/4”
7
34360
Clamp, Dynapure, with Knob
8
34400
Tube, Air Relief DP Acrylic
*
82168
O-Ring Only, Plastic Air Relief
#6
#5
#4
#8
#2
#7
#3
#1
18
Dynapure 100 & 150 Filter
Specifications:
Filter Model
Model #
Cartridge Filter
Capacity
Commercial
Flow
Rate
Filter
Area
DP100
34550
100GPM
37.5 GPM
100
SQ. FT.
DP150
34575
100 GPM
56 GPM
150
SQ. FT.
DP 100
DP150
Vak Pak Inc.’s
Dynapure Pool Filter
Dynapure Pool Filters answer the need for low cost,
easy to operate filtration systems for residential and
commercial swimming pools.
Available in 100 & 150 Square Feet
19
D.E. Separation Tanks
Vak Pak 84-S.F. / D.E. Separation Tank
Vak Pak Inc.
manufactures the
largest capacity
Separation Tank
in the industry.
REF #
PART #
DESCRIPTION
*
34600
SEPARATION TANK COMPLETE
1
34491
DOME, 84SF SEPARATOR TANK
2
82182
BAG, 84SF SEPARATOR TANK
3
82183
INSERT, 84SF SEPARATOR TANK
4
34360
CLAMP, 84SF SEPARATOR TANK
5
34340
BASE, 84SF SEPARATOR TANK
*
34380
O-RING, TANK BODY
*
82167
AIR RELIEF WITH O-RING
*
82168
O-RING ONLY, AIR RELIEF
PARTS FOR OLDER SEPARATION TANKS
*
36015
O-RING, PENTAIR 40’ & 60’ SEP TANK
*
36020
BAG, PENTAIR 40’ SEPARATOR TANK
*
36030
BAG, PENTAIR 60’ SEPARATOR TANK
*
36010
CLAMP, PENTAIR 40’ & 60’ SEP TANK
20
Chlormatic / Bromatic Feeder Parts
Vak Pak is no longer producing the Chlormatic and Bromatic feeders. Replacement parts are still available.
The picture, (below left), was the latest body style used, and parts are readily
available. If you have any questions, please give us a call.
**
Ref. No.
Part Number
Description
1
34930
Screw Cap
2
33871
O-Ring, Cap
3
20910
Chlorinator Flowmeter. 1/2” MPT
4
03600
Coupling, Threaded 1/2”
5
13830
Adapter, 1/2” Tubing x 1/2” MPT
5
13820
Adapter, 3/8” Tubing x 3/8” MPT
5
13810
Adapter, 3/8” Tubing x 1/4” MPT
6
13765
Tubing, 1/2” O.D. Black (Per Ft.)
6
13762
Tubing, 3/8” O.D. Black (Per Ft.)
7
13665
Valve, Inlet 1/2” FPT
7
10655
Calibrated Inlet Valve, 1/4” MPT x 1/4” FPT
8
05687
Nipple, 1/2” x CLS P.V.C.
9
10650
Valve, Drain 1/4” MPT x Hose Barb
Not Pictured
13655
Tubing, 1/2” O.D. Clear Flexible For Drain Valve ( Per Ft.)
Please note: Inline check valves have been totally eliminated.
Some parts shown are for earlier models, in which different size tubing
and connections were used.
If you are in need of a complete chlorine feeder, please contact us.
We offer erosion feeders from several manufacturers, in varying capacities.
21
Chlorine And PH Controllers & Feeders
Controllers
Model Number
Description
82093
Controller, BCES MR-1F CES
19246
Controller, Chemtrol 250
19235
Controller, CAT 2000
Chemical Feeders
Model Number
Description
32450
FEEDER STENNER, 45M2
32480
FEEDER STENNER, 45M4
32500
FEEDER STENNER, 45M5
32550
FEEDER STENNER, 85M5
Please Note: Vak Pak has used several different manufacturers of ORP
controllers, and chemical feeders. This represents the most popular models in current
production. Warranty service and parts are generally handled by the manufacturer
direct. However, if you do not see the model of your unit, or if non-warranty
replacement parts are needed, please contact us for assistance.
22
Remote Chemical Crocks
Part #
Description
42730
15-Gallon Remote Chemical Crock
42713
30-Gallon Remote Chemical Crock
42714
52-Gallon Remote Chemical Crock
42717
99-Gallon Remote Chemical Crock
Since ORP Controllers and liquid feeders have become more prominent, chemical
storage containers have also become necessary. Vak Pak Manufacturing offers 4
sizes of Remote Chemical Crocks to fit your needs. They come with a lockable lid
for security and may be buried out of the way for convenience.
Please Note: Make sure when ordering to specify chlorine or acid.
23
Vak Pak Inc. Cabinet Listing By Model Number
Model Number
Cabinet Number
Vacuum D.E.
Model Number
Cabinet Number
Pressure Cartridge Cont’d
CP6VDE
CB402
CS52PCV
CB502
Through
“
Through
“
CP14VDE
“
CS100PCV
“
AP14VDE
CB502
SP140VCT
CB602
Through
“
Through
“
AP22VDE
“
SP400VCT
“
CB602
SP500VCT
CB1002
AP10
Through
“
AP30
“
CHR24
CB602
AP32
CB1002
Through
“
Through
“
CHR36
“
AP40
“
CHR230
CB1002
AP44
CB1402
Through
“
AP52
“
CHR236
“
Through
“
AP56
“
AP60
“
RDE205
CB202
Through
“
Through
“
AP80
“
RDE215
“
RDE405
CB402
Pressure Cartridge
Pressure Sand Filter
Residential
CS189V
CB602
Through
“
Through
“
RDE415
“
CS540V
“
RC205
CS680V
CB1002
Through
“
CS52WPCV
CB402
RC215
“
Through
“
RC405
CB402
CS100WPCV
“
RC415
CB402
CB202
24
Cabinet Parts
Hardware For Old Style Cabinets / Lids
Part Number
Description
37100
Roof Jacks, 712 - AA
37170
Safety Cable, For Roof Jack
23700
Hinge, 3”x 3” , S.S. (Sold Each)
27020
Hardware Kit, 3”x 3” Hinges (Per hinge)
27015
Hardware Kit, For Roof Jacks (Per Roof Jack)
Hardware For New Style Cabinets / Lids
Part Number
Description
37130
100-lb Hydraulic Lifters (Used Primarily on Subterranean Vaults)
37125
90-lb Hydraulic Lifters
37120
60-lb Hydraulic Lifters
37110
30-lb Hydraulic Lifters
23730
Latch Assembly Complete
23702
Hinge, 3”x 3” S.S. Heavy Duty (Sold Each)
38913
Mounting Bracket W/Ball Stud
37111
Clip Retainer, For Ball Stud
27020
Hardware Kit, 3”x 3” Hinges (Per Hinge)
37118
Hardware Kit (30-90-LB Per Roof Jack)
37119
Hardware Kit (100-LB Per Roof Jack)
Grilles
Part Number
Description
37050
Grille, 10”x 10”
37000
Grille, 24”x 10”
25
Cabinet and Lid Part Numbers
New Style Cabinets “02” Series
Cabinet Model
Number
Cabinet Part
Number
Lid Part Number
Hydraulic Lifter
Part Number
CB104
41240
41280
37100
CB202
41385
41422
37110
CB402
40465
40375
37120
CB502
45523
40382
37120
CB602
40342
40375
37120
CB1002
40850
40890
37125
CB1402
40843
40375
40890
37125
37120
CB1702
40844
40375
40890
37125
37120
Old Style Cabinets “00” Series
Cabinet Model
Number
Cabinet Part
Number
Lid Part Number
Roof Jack Part
Number
CB104
41240
41280
37100
CB200
USE CB202
41420
37100
41890
41920
37100
CB400
USE CB402
40380
37100
CB600
USE CB602
40380
37100
CB1000
USE CB1002
40880
37100
FILTERPAK
26
CB1702
Cabinet Specifications
(Requires 90 & 60-LB Roof Jacks. See Pages 25-26 For Parts)
39..5”
201”
79”
27
CB1402
Cabinet Specifications
(Requires 90 & 60LB Roof Jacks. See Pages 25-26 For Parts)
39.5”
39.5”
161”
76”
79”
28
CB1002
Cabinet Specifications
(Requires 90-LB Roof Jacks. See Pages 25-26 For Parts)
29
CB1000 (Old Style)
Cabinet Specifications
(Requires Standard #37100 Roof Jacks. See Pages 25-26 For Parts)
30
CB602
Cabinet Specifications
(Requires 60-LB Roof Jacks. See Pages 25-26 For Parts)
31
CB600 (Old Style)
Cabinet Specifications
(Requires Standard #37100 Roof Jacks. See Pages 25-26 For Parts)
32
CB502
Cabinet Specifications
(Requires 60-LB Roof Jacks. See Pages 25-26 For Parts)
33
Filterpak
Cabinet Specifications
(Requires Standard #37100 Roof Jacks. See Pages 25-26 For Parts)
Please Note: This Cabinet Is No Longer Used in Current Production,
However, Parts Are Still Readily Available.
34
CB402
Cabinet Specifications
(Requires 60-LB Roof Jacks. See Pages 25-26 For Parts)
35
CB400 (Old Style)
Cabinet Specifications
(Requires Standard #37100 Roof Jacks. See Pages 25-26 For Parts)
36
CB104
Cabinet Specifications
(Requires Standard #37100 Roof Jacks. See Pages 25-26 For Parts)
CB200 (Old Style)
Cabinet Specifications
(Requires Standard #37100 Roof Jacks. See Pages 25-26 For Parts)
37
CB202
Cabinet Specifications
(Requires 30-LB Roof Jacks. See Pages 25-26 For Parts)
LOCKABLE
ACCESS
Low Profile Collector Tank Lid
Specifications
Fits: CT120LP / CT140LP / CT200LP / CT300LP
38
CT-60
Cabinet Specifications
Order Part # 45013
COLLECTOR TANK
SKIRT
Set your collector tank to
proper static water level,
regardless of grade. The
skirt can be custom made
to your height specs,
from 3” to 24”. It can also
be ordered later and
easily installed in the
field at any time.
Order part # 41423,
and specify your height
requirements.
Cabinet Identification
Vak Pak changed cabinet styles in 2002. All new style cabinet designations end in “02”,
(E.G. CB402 / CB602 Etc.). The drawings below show the difference in the new style “02”
lids, and the old style designated as “00” lids or cabinets, (E.G. CB400 / CB600 Etc.).
39
Main Drains - VGB Compliant
Since the early 1970’s, Vak Pak Inc. has been manufacturing quality
fiberglass, sand coated main drain forming shells for commercial and
residential use. Our easy to use, VGB compliant product is available in many
standard sizes and configurations, as well as custom designs, made to your
specifications. Drains can be made with either slip, or threaded fittings.
We stock many VGB frame & grates to fit not only our drains, but the
majority of the main drains you are using. Our main drains are available in
beige or black. If you have any questions, or would like to place an order,
please contact our parts department for assistance.
CMD 9/3/2 Main Drain - VGB Compliant
PART #
DESCRIPTION
42340
CMD MAIN DRAIN, 9/3/2
42360
CMD MAIN DRAIN, 9/3/3/2
40
Main Drains - VGB Compliant, Contd.
CMD 12/4/2 Main Drain - VGB Compliant
PART #
DESCRIPTION
42380
CMD MAIN DRAIN, 12/4/2
42400
CMD MAIN DRAIN, 12/4/4/2
CMD 12/6/2 Main Drain - VGB Compliant
PART #
DESCRIPTION
42421
CMD MAIN DRAIN, 12/6/2
41
Main Drains - VGB Compliant, Contd.
CMD 18/8/2+2 Main Drain - VGB Compliant
23”
17”
25”
18-1/2”
13”
PART #
DESCRIPTION
42460
CMD MAIN DRAIN, 18/8/2+2
Over the years we have received many questions concerning the use of a square frame & grate on
a round main drain. As you can see below, examples 1 & 3, show a perfectly straight, plumbed
suction line. Examples 2 & 4, however, show us the all to familiar, slightly offset plumbing line.
With the round main drain, example 2, you can easily adjust the frame & grate, and remain
square to the overall layout of the pool. With a square main drain, as example 4 shows, the frame
& grate has little, or no adjustment. ( Exaggerated drawing for illustration only)
Parallel to pool wall.
42
Main Drain Identification
Vak Pak Manufacturing produces many different types of VGB compliant main
drains, from our standard products, usually in stock and ready for immediate
shipment, to custom main drains, built to your specifications. In order to make it
easier for you to order and receive exactly what you need, we would like to explain
our model number designations. There are three basic size main drains, 9”, 12”,
and 18”. When ordering, the first number is the size of the drain, (E.G. 12/), for a
12” drain. The second number indicates the side outlet, (E.G. 12/4), which is a 4”
fitting. The third number indicates the bottom outlet fitting, (E.G. 12/4/2), which is
2”. The exceptions to this being if 2 outlets are required on the side of the drain,
this number would read, 12/4/4/2, and if there are more than one bottom fitting, it
would read, 12/4/4/2+2. We have put together several examples of standard and
also custom main drains below.
As you can see, the model number designations are fairly
simple. Main drain size, side outlet, and bottom port. These are
just a few of the possibilities for customized drains. Also
remember, any of these drains can be made with couplings,
(all slip), or female adapters, (slip x thrd), or in any
combination of the two. If you have any questions, need a quote
on a custom design, or are ready to order, simply contact our
parts department for assistance.
43
VGB Compliant Grates and Unblockable Drains
Vak Pak Builders Supply has you “covered” when it comes to VGB
approved main drain covers and unblockable drains. With
manufacturers like Waterway, A & A Manufacturing, Aquastar,
and Custom Molded Products, we have what you need.
We stock everything from the 8” residential drains & grates, up to 18”x 18”.
24”x 24” grates are available on a special order basis.
44
Terms and Conditions
Pricing
Prices are subject to change without notice unless a quote has been made. Quotes from the Builder
Supply Store are good for 90 days. All prices are F.O.B. our warehouse and custom orders are F.O.B.
point of origin. Prices are subject to applicable sales and/or use taxes unless customer has on file
with Vak Pak, and up to date tax exemption certificate.
Terms
Customers, with approved open accounts, may take a 1.5% discount if paid by the 10th. of the month,
following invoice date. A 1.5% service charge per month or portion thereof on all past due accounts. Past
due status will cause delivery of shipment to be withheld on any new or outstanding orders.
All parts orders MUST be prepaid, either with a credit card, or check in advance,
if you do not have an established account with Vak Pak. We do not ship C.O.D.
Damaged or Shortage Claims
Seller’s responsibility ceases when merchandise is turned over to a common carrier. Damages or
shortages must be reported to delivery carrier immediately upon receipt and so noted on Bill of Lading
before acceptance of shipment is made. Otherwise, no claim can be enforced against
the Deliverer, Carrier, or the Seller.
All shortage claims must be reported within 48 hours.
Returned Merchandise
Merchandise MAY NOT BE returned without prior authorization. Merchandise returned is subject to
inspection and a 15% restocking charge, providing the returned merchandise is in original condition.
Special freight charge may apply.
Warranty
Equipment or accessories not manufactured by Vak Pak will carry only warranty furnished by the
manufacturer. Vak Pak will act as an agent for purchasers to obtain warranty from said manufacturer,
but Vak Pak will not warranty or be held liable for said products warranty. Equipment or accessories
manufactured by Vak Pak carry a 12 month warranty from date of shipment.
45
INDIAN RIVER PLACE
THE FIRST VAK PAK EVER SOLD.
The first Vak Pak ever sold was installed in 1970, by
Vero Beach Pools. As of December, 2013, it was still in
operation. We are trying to put together data on the
average life of a Vak Pak, but after 40 years, and the
first unit is still going strong, it may take us a while.
46