The Future of Automotive
Automotive
Material
Solutions
Contents
Product Overview 04
Products 06
Properties Guide 26
Integrated Solutions 28
Global Network 29
We are committed to
producing high-performance
materials and developing
optimal solutions to create
the future for automotives
in close partnership with you.
Automotive Material Solutions
03
Product Overview
page # 06
page # 17
INTERIOR
LIGHTING
Super Low Gloss ABS, Low Gloss PC/ABS, High
Flow PC/ABS, High Stiffness PC/ABS/GF
High Heat Resistant PBT Alloy, High Heat
Resistant ABS, High Gloss-Low Gas PC/ABS
Plastics for automotive interior applications
require various physical properties, like thermal,
mechanical, chemical resistant and low TVOC
(Total Volatile Organic Compound) properties.
Our ABS and PC alloy resins with good physical
properties help to improve impact resistance and
weight-reduction.
Automotive head lamps are made up of many
engineering plastic parts, including polycarbonate
lens, bezel, reflector and other intricate components.
We provide not only special ABS with low outgassing but the top-of-the line PBT/PET alloy for
direct-metalizing designed to reduce costs and
boost productivity.
page # 21
page # 11
EXTERIOR
Metal Plating Material, Weather-Resistant ASA,
High Modulus PC/PET, High Flow and High Impact
PC/PBT
Our engineering plastic resin group including
ASA, metal-plating ABS, PC alloy are well suited
for exterior applications such as radiator grille,
mirror, door handle with excellent weatherability.
STRUCTURE
Conductive and High Heat Resistant PA/
PPE/CNT, Dimensional Stability PBT/ASA/
GF, Low Temperature Impact PC/PBT
Our CNT composite material and special reinforced materials provide effective weightreduction solutions and excellent dimensional
stability benefit for structure consisted of steel
and high modulus materials.
page # 24
04
SAMSUNG SDI
Automotive Material Solutions
05
Interior
Interior
Low Gloss ABS, PC/ABS
(ABS, Injection)
INFINO Ⓡ, starex Ⓡ Low Gloss ABS, PC/ABS materials have been
developed for non-painting application purpose. This UV stabilized
product comes with low gloss level and excellent mechanical
properties.
WP-1098
benefits
Applications
•Good
weatherability
•Center
•Good
impact strength
•Air
SL-0100
(ABS, Sheet)
ABS
PC/ABS
PC/ABS/GF
Heat Resistant
General Purpose
WP-1100
General Purpose
HP-1000XA
WP-1120
SR-0300
HP-1000X
WP-1200
SR-0310FM
High Flow
SR-0320 K
WP-1069
SR-0325LT
SR-0330M
SR-0340M
WP-1089
LH-0300
(PC/ABS)
fascia
vent cover
Low Gloss
WP-1098
Low TVOC
SR-0320LT
SR-1320LT
CHARACTERISTICS
SR-0325LT
Low Gloss
Super Low Gloss
SL-0100
High Heat Resistant
LH-0300
MG-0330
Product Line-up
PC Alloys
ABS
SL-0100
LH-0300
WP-1098
WR-7250HS
Matt ABS (Gloss 10 ),
Mid-Heat ABS
PC/ABS (Gloss 30 ),
PC/ASA (Gloss 30 ),
Extrusion
(Gloss 30 ), Injection
High impact, Injection
Injection
Gloss Change by Tool Temperature
Tool Temp.
WP-1098Reference
28
60°C 33
40
90°C 63
76
Tool temp.
30°C 22
WP-1098
06
SAMSUNG SDI
Reference
Automotive Material Solutions
07
Interior
Low TVOC ABS
SR-0320LT
SR-1320LT
SR-0325LTS
Interior
High Flow PC/ABS
starex Ⓡ Low TVOC ABS can be used for injection part of automotive
interior with a very low total volatile organic compound and well
balanced physical, thermal properties.
WP-1069
WP-1089
INFINOⓇ PC/ABS (WP Series) is characterized by its high flowability.
The product also has excellent material properties with an optimal
balance.
benefits
Applications
benefits
Applications
•Low
•Center
•High
•Center
TVOC: VDA277 (<50μgC/g)
•Fulfilling
VW, DBL, BMW,
Toyota VOC requirement
console
• Window
flowability
switch panel
•Air
fascia
vent
CHARACTERISTICS
Impact & Heat Property
CHARACTERISTICS
Property Balance
Impact Strength Maintenance Rate
Low TVOC: VDA 277
WP-1069
100
100
75
75
WP-1098
WP-1069
Reference (PC 65%)
Izod Impact,
notched, 23°C
(kgf∙cm/cm)
Reference
(ISO 180, IZOD impact)
65
60
100%
55
94%
50
Spiral Flow,
250°C, 2mm
(cm)
50
30 PPM
25
40
35
95°C
Ref. A
Ref. B
SR-1320LT
Heat Resistance
Ref. A
Ref. B
Reference
Charpy 23°C
Heat Sagging
(95°C)
No Aging
good
Very good
115°C
After 1000hrs
in 70°C/80RH%
Thermal Stability
(270°C)
Heat Deflection
Temp.
Thermal Stability
Charpy -30°C
35
(90°C)
normal
Impact Strength
SR-0320LT
Heat Sagging
bad
110°C
0
Izod Impact,
notched, -30°C
(kgf∙cm/cm)
Very bad
100°C
105°C
0
45
40
35
30
10 PPM
HDT
25
73%
50%
25
SR-0320LT
50
30
94°C
92°C
4mm
5mm
WP-1069 Reference
30
25
20
9mm
10mm
(Gloss Change, 270°C * 10min.)
Before After Before After
99.1
95.9 101.8 87.6
15
▲ Gloss = 3.2
▲ Gloss = 4.2
10
Gloss (60’)
5
0
SR-1320LT
Ref. A
Ref. B
before
after
before
Gas silver
08
SAMSUNG SDI
after
Flow mark and discoloration
Automotive Material Solutions
09
Interior
Exterior
High Stiffness PC/ABS/GF
WP-1100
WP-1200
WP-1120
INFINOⓇ PC/ABS/GF has excellent dimension stability. Its mechanical
properties such as impact strength and high stiffness are also
reliable.
ABS
WR-7000
AE-2230
MP-0160 R
WX-7010
AE-2130
benefits
Applications
•Impact
•Instrument
BM-0320J
•Dimensional
stability
•Glove
Blow Molding
panel
box
•Metal-back
PC/PET/MF
Metal Plating
MP-0670
strength
PC/ASA
molding
ASA
General Purpose
Characteristics
WR-9120J
WR-9300HF
Dimensional Stability
WR-9330I
PC/ABS
PBT/PC
GENERAL PURPOSE
Painting
WP-1059
AE-3060
WP-1053
Metal Plating
WP-1041
WP-1041G
WP-1071
PBT/PET/GF
AR-6508
Heat Resistant
TD
Isotropy
WX-9300UV
WX-9310UV
Minimized
GF allignment
WX-9330UV
PC/PET
AE-2030
Samsung
PC/ABS/GF
MD
Samsung PC/ABS/GF
demonstrates
good dimensional stability
After Injection
After Cooling
Difference
WP-gradeReference
Good Adhesion between Resin and GF
“High Modulus & Impact Strength”
High Flowability
WP-1200
Impact Strength
Reference GF 20%
12
42
40
5%
10
38
6%
36
8
34
32
6
30
MFI
10
SAMSUNG SDI
WP-1200
Ref.
WP-1200
Reference
GF 20%
Automotive Material Solutions
11
Exterior
Metal Plating Material
MP-0160 R
MP-0670
WP-1041G
Exterior
Weather Resistant ASA
starex Ⓡ Metal Plating ABS is a material that forms stable anchor
hole with high-level adhesion strength to its excellent etching
performance. The product with uniform rubber dispersion and
optimal flowability minimizes the occurrence of pit, thereby
resulting in high-quality surface after the plating process is
completed. INFINO Ⓡ Metal plating PC/ABS maintains optimal
surface appearance and high-level adhesion through the
combination of SAN, rubber size and rubber types.
WX Series
starex Ⓡ WX Series shows balanced properties such as heat
resistance and impact strength. The product has gone through
rigorous weather resistance tests in order to minimize color
fastness and discoloration, targeting exterior materials market.
benefit
•Superior
•High
benefits
•Excellent
•High
•Radiator
adhesion strength
•Quality
•Rear
consistency
grille
garnish
weather performance
impact resistance
term retention of
“Fresh and New” appearance
• Outside
• Door
handle
• Emblem
grille
•Pillar
Characteristic
Excellent Weatherability
Weatherability (3000h)
Grade
Metal Plating ABS (MP-0160 R, MP-0670)
Impact Properties
Delta E Gloss Retention
IZOD
FDI
Conventional ASA
5~10
< 5%
< 15
25~27
≤ 3
Good Surface Quality without Pitting
Good Surface Quality without Pitting
starex® WX Series
25~40%
19~21
28~29
Well dispersed rubber and quality consistency
Thermal Cycle Test Result
Performance
+ 40 %
+ 400 %
Improvement
+ 25 %
+ 15 %
Adhesion Strength [g]
Result
(Blister)
MP Series Reference 1 Reference 2
OK 1,020790 520
Conventional
Improved ABS
* Cycle: 70˚C (1Hr.) → 25˚C (0.5Hr.) → -30˚C (1Hr.) → 25˚C (0.5Hr.)
** Cycle No.: 4 times
Metal Plating PC/ABS (WP-1041G)
WP-1041G
Reference 1
Reference 2
Grade Selection
Heat Resistance
Properties
Regularly etched
Incompletely etched
Under etched
·Matrix SAN
composition optimize
·g-ABS dispersion and
content control
·Rubber dispersion
is not regular in SAN
phase
·Matrix SAN
composition is not
optimized
Pit1.7
Pit6.2
Pit4.5
Adhesion415
Adhesion387
Adhesion250
Super High Heat Resistance
WX-9310UV
WX-9330UV
Properties
Impact
Resistance
Schematic
Diagram
High Heat Resistance WX-9300UV
SAMSUNG SDI
mirror
mirror
CHARACTERISTICS
12
•Outside
•Radiator
•Longer
Applications
surface
Application
Weatherability
(3,000h)
Grade
FDI (N/J)
Dupont Drop
(Destruction Rate)
dE
Gloss
Retention
WX-9300UV WX-9310UV WX-9330UV
3,430 / 28
3,400 / 28
3,590 / 29
12%10% 10%
2.82.5 2.6
44%40% 31%
MI
126.04.5
VST
98 101103
Automotive Material Solutions
13
Exterior
Weather Resistant PC/ASA
High Modulus PC/PET
INFINOⓇ PC/ASA demonstrates superior weatherability performance
with well-balanced properties such as impact strength, heat
resistance and flow, targeting various exterior applications.
benefits
•Superior
•High
Applications
weatherability
•Radiator
Impact resistance
•Outside
grill
INFINOⓇ PC/PET and PC/PET/MF demonstrate better paintability
while minimizing surface defects after the painting process is
completed, thanks largely to its excellent dimensional stability,
high toughness and low CLTE.
benefits
Applications
•High
•Radiator
impact strength
•Good
mirror
toughness and low CLTE
•Dimensional
•Good
thermal stability
•Roof
rack
•Good
flowability
•Rear
spoiler
stability
• Door
handle
• Rear
spoiler
CHARACTERISTICS
PC/PET: AE-2030
PC/ASA WR-7000
Dimension Stability (Low CLTE & Low Warpage)
Reference
Change of dE
dE
100
80
20
Dimension Change (μm)
Test Method:SAE J 1960 (Standard BK Color)
Flowability
4
Surface Quality
1.0
40.01
Alpha=75.63μm(m°C)
0
0.6
-20
60
0.2
Color
performance
grille
• Garnish
CHARACTERISTICS
WR-7000
AE-2030
AE-2130
AE-2230
40
-40
Weatherability
2
-60
-40
AE-2030
Reference
9880
Gloss (60°)
-20.01°C
20
Derive Dimension Change (μm/°C)
WR-7000
WX-7010
Exterior
-0.2
-20
0
20
40
CLTE: 75 x 10-6/°C
60
80
Temperature ℃
AE-2030 has better gloss and
shows good paintability
0
Thermal
stability
0
Impact
resistance
500
1000
1500
Test Time (Hr)
PC/PET/MF: AE-2130, AE-2230
Improved Surface Quality
PC/ASA WX-7010
WR-7000
Reference
Test Method:SAE J 1960 (Standard BK Color)
Flowability
Schematic Diagram
Injection Molding Specimen
Gate
Gate
MF dispersion optimize
Good surface finish
Gate
Gate
MF aggregation
Flash, flow mark
Change of dE
dE
100
80
4
60
Color
performance
40
Weatherability
20
2
AE-2130: 5% MF, AE-2230: 20% MF
0
Thermal
stability
14
SAMSUNG SDI
Impact
resistance
0
500
1000
1500
2000
Test Time (Hr)
Automotive Material Solutions
15
Exterior
LIGHTING
High Flow and High Impact PC/PBT
AE-3060
INFINOⓇ PC/PBT is designed for automotive exterior applications
as it has high impact strength and chemical resistance, excellent
dimensional stability and stable injection molding capability.
benefits
Applications
•High
•Door
handle
• Roof
rack
toughness
•Good
•High
dimensional stability
flowability
ABS
PC
PC/ABS
Heat Resistant
General Purpose
General Purpose
SR-0300
LT-1100
HP-1000XA
SR-0320 K
LT-1220
SR-0325LT
High Flow
Solid Optic
WP-1069
FX-8500
WP-1089
Light Diffusion
High Gloss
LT-1220
HP-1000X
SR-0330M
• Pillar
Low Gas
HP-1000XG
ASA
CHARACTERISTICS
High Flowability
High Impact Strength
Spiral Flow Test
AE-3060
Reference 1
Notched IZOD
Reference 2
AE-3060
Reference 1
Reference 2
(kgf∙cm/cm)
[23°C]
PBT
General Purpose
General
WR-9330I
ASF-9810F
WR-9370
Low Gas
WR-9390
ASF-9810FM (High Flow)
ASF-9810FL (Medium Flow)
80
60
40
20
0
(kgf∙cm/cm)
[-30°C]
25
20
15
AE-3060 shows the highest
flowability at the same condition
· Mold temp.: 60°C
· Nozzle temp.: 260°C
· Specimen thickness.: 2mm
10
5
0
Good impact performance
at room/low temp
16
SAMSUNG SDI
Automotive Material Solutions
17
LIGHTING
High Heat Resistant PBT
ASF Series
ASF-9810F
ASF-9810FM
ASF-9810FL
LIGHTING
High Gloss-Low Gas PC/ABS
Materials for Head Lamp Bezel require excellent surface quality as
well as low gas output, easy mold release and high heat resistance.
INFINOⓇ ASF Series has applied well-tailored additive system for
remarkable less mold deposit, allowing for direct metallization that
helps cut production costs.
HP-1000X
HP-1000XA
HP-1000XG
INFINOⓇ PC/ABS (HP Series) is characterized by its high gloss.
The products come with low gas generation and well-balanced
physical properties, targeting various lighting applications.
benefits
Applications
benefits
Applications
• High
heat resistance
• Head
• High
gloss
• Rear
• High
gloss surface
• Fog
• High
heat resistance
• Center
• Low
gas
• Rear
• High
impact resistance
• Rear
• Easy
mold release
• Low
gas
lamp bezel
lamp bezel
lamp reflector
CHARACTERISTICS
high mounting stop lamp
lamp reflector
CHARACTERISTICS
Easy Mold Release
High Flowability
On top of high heat resistance, the product
adopts top-of-the-line lubricants specially
designed to improve mold release even when
there is no under cut on the back of the product.
ASF Series
Conventional PBT
INFINO Ⓡ HP Series
Reference
37g/10min
34g/10min
Spiral Test
Melt Flow
(250°C, 2.16kgf)
Special Surface Roughness
The use of amorphous materials has improved
the surface flatness significantly, resulting in an
optimal surface quality for direct metallization.
ASF Series
(Ra: 10.2nm)
Reference 1
(Ra: 24.2nm)
Reference 2
(Ra: 31.9nm)
Low Out Gassing
Fogging test (250°C, 1Hr)
INFINO Ⓡ HP Series
INFINO Ⓡ HP SeriesReference
Reference
100
Gas Mark
75
Reduce Cooling Time
The optimization of re-crystallization temperature can reduce the cooling time for injection molding
by more than 20%, allowing for an important cost-reduction during the production process.
1.0
222°C
0.5
0.0
50
25
Conventional PBT
Heat Flow (W/g)
ASF Series
Heat Flow (W/g)
lamp housing
1.5
0
222°C
ppm
Haze
0.5
-0.5
-0.1
-0.5
165°C
190°C
-1.5
-2.0
-1.5
0
150
100
250
200
350
300
350
Temperature (°C)
18
SAMSUNG SDI
0
150
100
250
200
350
300
350
Temperature (°C)
Automotive Material Solutions
19
LIGHTING
Structure
Diffusion PC
LT-1220
INFINOⓇ Diffusion PC is designed for light guide plate in head
lamp and rear lamp application as it offers excellent light diffusion
effect, high flow for complex structure, high heat resistance as well
as customized color variety.
PC/PBT
PBT/ASA/GF
Low Temperature Impact
Dimensional Stability
AE-3063I
AR-5110 (GF10%)
AR-5210 (GF20%)
AR-5300H (GF30%)
benefits
Applications
• High
flowability
• Light
guide plate
• High
heat resistance
• Inner
lens
• High
impact resistance
• No
PC/ASA
WR-7000P
Conductive & High Heat Resistant
PC/PET/MF
LED hot spot
• Uniformed
PA/PPE/CNT
CA-7000
Dimensional Stability
diffusion image
AE-2130
CHARACTERISTICS
Uniformed Lighting Image (Without LED Hot Spot)
INFINO Ⓡ LT-1220Reference
(LED Hot Spot)
UV Resistance
PMMA Red Covering
PMMA Clear Covering
Hard Coating PC Covering
1.3
1.5
0.4
Combination
ΔE
(SAE J 1960, 2500KJ)
20
SAMSUNG SDI
Automotive Material Solutions
21
Structure
Structure
Conductive and High Heat Resistant
PA/PPE/CNT
CA-7000
Plastic fenders give not only over 40% weight reduction effect
but design freedom compared with steel fenders. INFINO® PA/
PPE/CNT with conductive and high heat resistant properties can
provide lightweight solution.
benefits
Applications
• High
• Fender
heat resistance
• Weight
reduction
• Fuel
• Design
freedom
• Body
Better Surface Quality
SAMSUNG SDI has adopted CNT (Carbon
Nano Tube) composite for producing conductive
fillers. Conductive PA/PPE/CNT grades can
be used for the electrostatic painting process
without conductive primers. This advantage
also allows for fewer production processes and
lower manufacturing costs.
CNT Composite is Better Surface Quality
than Carbon Fiber
CNT Composite
filler door
panel
• Conductivity
• Dimensional
CF Composite
stability
Lower Moisture Absorption
CA-7000 is engineered to have lower moisture absorption ratios than other comparable products in
the market.
CHARACTERISTICS
Thermal Stability and High Impact Property
Submerged in water @RT
CA-7000
2.5
Water Absorption (%)
10,000
Water Absorption (%)
E’ (MPa)
Reference
1,000
Reference
45°C, 95%RH
Sagging Test
DMTA
CA-7000
CA-7000
2
1.5
4
3
2
1
100
Reference
1
0.5
10
Oven Condition
· 200°C/1hr.
1
0
50
100
150
200
0
50
100
150
200
250
Time (days)
0
10
20
30
40
50
60
70
Time (days)
250
Temperature (°C)
Elastic modulus (E’) at 205°C
CA-7000 = 170 MPa
Reference = 63 MPa
DMTA Measurment (2 point bending)
· Temp. range: 20 ~ 240°C
· Scanning rate: 5°C/min.
22
SAMSUNG SDI
· Displacement: 5μm
· Frequency: 1Hz
Automotive Material Solutions
23
Structure
Dimensional Stability PBT/ASA/GF
Low Temperature Impact PC/PBT
Automotive OEMs are developing new models equipped with
panorama sunroof in response to its popularity in the market.
But the complicated design and specialized functions of roof
module lead to increase the weight. INFINO® PBT/ASA/GF (AR
Series) developed for plastic sunroof frame provides excellent
dimensional stability with a competitive lightweight solution.
benefits
• Weight
stability
• Panorama
reduction
integration
• High
flowability, High stiffness
benefits
Applications
• High
• Bumper
toughness
dimensional stability
• Chemical
sunroof frame
• Good
The plastic frame for panorama sunroofs can cut the
weight by as much as 40% compared with its steel
counterpart.
• Part
INFINOⓇ PC/PBT (AE-3063I) is designed for automotive bumper
and energy absorber applications as it has low temperature impact
strength, chemical resistance, and high flowability.
• Good
Applications
• Dimensional
AE-3063I
• Energy
beam
absorber
resistance
flow properties
CHARACTERISTICS
Impact Strength Comparison
CHARACTERISTICS
INFINO® PBT/ASA/GF (AR Series) has better transverse mold shrinkage rate than other comparable
materials in the market. It also has lower CLTE, which helps reduce deformation after injection
molding and bolsters dimensional stability.
INFINO® PC/PBT (AE-3063I) has better impact
strength at wide temperature range than other
comparable materials in the market.
AE-3063I
IZOD (kgf cm/cm)
AR-5300H
AR-5210
AR-5110
Structure
Reference
80
60
40
AR-5110
AR-5210
Reference PBT/ASA/GF10
AR-5300H
Reference PBT/ASA/GF20
Reference PBT/ASA/GF30
TD Shrinkage Comparison
20
CLTE Comparison
10
-40
1.05
μ/m°C
TD Value
Mechanical Direction CLTE
50
0.85
40
20
40
Temperature ℃
0.75
30
Flowability
GF 20%
0
60
0.95
GF 10%
-20
AE-3063IReference
Reference
Flow Length (mm)
Melt flow Index = 260°C, 5kg
GF 10%
GF 30%
AE-3063I
Chemical Resistance
GF 20%
GF 30%
250
200
150
MI=21
MI=14
Crack
100
μ/m°C
Transverse Direction CLTE
Test Condition
155
· Thinner 2min.
· Drying at 70°C 30min.
50
145
· Aging at RT 3hr.
· Dupont drop (1m, 4kg)
0
Flow length (mm)
135
INFINO® PC/PBT (AE-3063I) can help to make a big part injection molding and it has superior
impact absorption energy.
125
115
GF 10%
24
SAMSUNG SDI
GF 20%
GF 30%
Automotive Material Solutions
25
Properties Guide
Properties
Physical Properties
Specific Gravity
Test Method ASTM D-792
Segment
Products
PC/ABS (High Impact)
Interior
PC/ABS (High Flow)
Center Console
PC/ABS (Low Gloss)
Center Console
I/P Core
PC/ABS/GF
Globe Box,
Metal Back Molding
Low Gloss ABS
Interior Part
High Heat ABS
(General Purpose)
Interior Part
Radiator Grille,
Side Mirror Housing
ASA
A,B,C Pillar Trim
Side Mirror Housing
Radiator Grille
Metal Plating ABS
Exterior
PC/ABS
Metal Plating
PBT/PET/GF
PC/ABS
PC/PBT
Side Mirror, Base Plate
Wheel Cover
Door Handle, Door Panel
Radiator Grille
Rear Spoiler
PC/PET
PC/ASA
Structure
Radiator Grille
Radiator Grill, Side Mirror
Housing, Roof Rack
PA/PPE/CNT (High Heat)
PC/ASA
PBT/ASA/GF
Fender & Fuel Filler Door
Roof Side Molding
Panorama Sunroof Frame
PC/PBT
Bumper Beam,
Energy Absorber
PC/PET
Tailgate Outer Panel
Metallization PBT
Head Lamp Bezel
PC
Head Lamp Bezel
High Heat ABS
(General Purpose)
Rear Lamp Hosuing
Lighting
26
PC/ABS (High Impact)
Rear Lamp Hosuing
High Heat ASA
Rear Lamp Hosuing
SAMSUNG SDI
Mold Shirinkage
Tensile Strength
Flexural Strength
Flexural Modulus
Thermal Properties
Izod Impact (Notched) Charpy Impact
Hardness
VST
ISO 1183
ASTM D-1238
ISO 1133
ASTM D-955
ASTM D-638
ISO 527-1A
ASTM D-790
ISO 178
ASTM D-790
ISO 178
ASTM D-256
ISO 180-1A
ASTM D-785
ISO 2039-2
ISO R 306
50N,
120°C/hr
Key Application
I/P Part, Center Fascia
Mechanical Properties
Melt Flow Index
Test
Condition
Natual Color
Natual Color
220°C/10kg
250°C/10kg*
250°C/5kg**
250°C/2.16kg***
220°C/10kg
250°C/10kg*
250°C/5kg**
250°C/2.16kg***
-
50mm/min
5mm/min*
50mm/min
5mm/min*
2.8mm/min
5mm/min*
2mm/min
2.8mm/min
5mm/min*
2mm/min
1/4''
1/8''*
-
-
-
Unit
-
-
g/10min
g/10min
%
kgf/cm2
MPa
kgf/cm2
MPa
kgf/cm2
MPa
kgf/cm2
KJ/m2
R-Scale
R-Scale
°C
HP-1000X
HP-1000XA
WP-1069
WP-1089
WP-1098
WP-1120
WP-1100
WP-1200
SL-0100
LH-0300
MG-0330
SR-0300
SR-0310
SR-0310FM
SR-0320 K
SR-0320LT
SR-1320LT
SR-0325LT
SR-0330M
SR-0340M
WR-9300HF
WR-9330I
WR-9120 J
WX-9300UV
WX-9310UV
WX-9330UV
MP-0160 R
MP-0670
WP-1041G
WP-1071
AR-6508
WP-1059
AE-3060
AE-2030
AE-2230
1.15
1.13
1.13
1.13
1.12
1.21
1.22
1.27
1.04
1.07
1.07
1.05
1.05
1.06
1.06
1.06
1.08
1.06
1.06
1.07
1.07
1.07
1.07
1.08
1.09
1.09
1.04
1.04
1.09
1.14
1.75
1.12
1.2
1.2
1.35
1.15
1.13
1.13
1.13
1.12
1.21
1.22
1.27
1.04
1.07
1.07
1.05
1.05
1.06
1.06
1.06
1.08
1.06
1.06
1.07
1.07
1.07
1.07
1.08
1.09
1.09
1.04
1.04
1.09
1.14
1.75
1.12
1.2
1.2
1.35
6***
28*
48*
44*
33*
15*
40*
36*
8
9
3.5
13
12
20
8.5
10
14
4
3
2.5
14
5
26
12
6
4.5
1.5 (200°C/5kg)
2.3 (200°C/5kg)
32*
24*
9.5***
45*
8***
32*
40*
6***
28*
48*
44*
33*
15*
40*
36*
8
9
3.5
13
13
20
8.5
10
14
4
3
2.5
14
5
26
12
6
4.5
1.5 (200°C/5kg)
2.3 (200°C/5kg)
32*
24*
9.5***
45*
8***
32*
40*
0.5-0.7
0.5-0.7
0.5-0.7
0.5-0.7
0.5-0.7
0.3-0.4
0.2-0.4
0.15-0.35
0.4-0.7
0.4-0.7
0.4-0.7
0.4-0.6
0.4-0.6
0.4-0.6
0.4-0.6
0.4-0.6
0.5-0.7
0.4-0.6
0.4-0.6
0.4-0.6
0.4-0.7
0.4-0.7
0.4-0.7
0.4-0.7
0.4-0.7
0.4-0.7
0.3-0.6
0.3-0.6
0.5-0.7
0.5-0.7
0.17-0.55
0.5-0.7
0.5-0.7
0.6-0.8
0.6-0.8
570
550
570
600
520
760*
920*
1,200*
330**
360*
430*
450*
410*
400*
420*
430*
504*
440*
450*
430*
460
480
450
440
440
460
480
400
540
500
1,450
540
600
570
630
54
51
53
53
56
84
94*
109*
35
34
46
45
48
46
45
48
53
51
50
47
50
51
43
48
48
50
45
47
55
46
140
54
58
54
63
810
750
830
805
700
1,150
1,200
1,500
450
470
640
620
630
640
650
650
782
620
670
640
700
710
650
680
700
700
690
600
720
680
2,200
750
850
780
970
77
78
78
78
80
126
150
180
57
58
78
74
77
75
81
80
77
85
89
79
76
80
72
70
74
75
68
79
70
68
210
75
83
83
97
23,000
20,500
22,500
22,000
20,000
37,000
43,000
62,000
16,000
17,000
22,000
23,000
21,000
21,000
22,000
23,000
23,800
21,000
22,000
22,000
23,000
23,000
21,000
22,000
22,000
22,000
23,000
20,000
21,000
20,000
140,000
22,500
22,000
21,000
41,000
1,978
2,107
2,114
2,100
2,100
4,149
4,700
7,400
1,829
1,895
2,401
2,500
2,539
2,546
2,700
2,400
2,400
2,800
2,700
2,433
2,530
2,600
2,260
2,260
2,320
2,400
2,300
2,500
2,000
1,800
14,000
2,250
2,130
2,200
4,120
58
45
59*
62*
62*
13*
8
8
7*
18*
13
30*
20*
18
19
19
29*
12
17*
14
12*
14*
21*
20*
18*
14*
28
27
60*
60*
9
48*
77
72
9
60
50
45
50
50
14
12
11
11
17
14
22
16
16
15
19
32
14
11
12
10
10
9
14
14
12
27
28
50
48
11
45
65
61
6
115
113
97
97
110
110
110
109
110
113
113
114
110
107
107
105
105
102
100
109
106
101
108
112
114
113
-
116
111
113
114
116
93
99
113
108
111
112
106
110
109
109
112
110
108
105
105
106
100
109
106
101
107
112
124
114
108
129
123
122
128
119
132
129
130
97
100
114
102
104
104
106
106
106
113
116
119
98
104
98
99
101
103
100
98
110
129
202
113
122
130
130
WR-7000
1.18
1.18
30*
30*
0.5-0.9
560
59
820
(10mm/min)
90
22,000
(10mm/min)
2,500
55*
36
114
112
110
WX-7010
CA-7000
WR-7000P
AR-5300H
1.16
1.09
1.14
1.45
1.16
1.09
1.14
1.45
38*
12(280°C, 5kg)
34*
20(275°C, 2.16kg)
38*
12(280°C, 5kg)
34*
27(275°C, 2.16kg)
0.5-0.6
1.6-1.9
0.5-0.6
0.2-0.4
550
610
590
1,300*
56
55
57
130*
750
850
820
1,900
80
80
87
190
21,500
21,000
23,000
94,000
2,250
2,100
2,200
9,400
15
19
46*
9
60
43
9.5
111
113
114
-
110
114
-
118
203
114
-
21(260°C, 5kg)
21(260°C, 5kg)
AE-3063I
1.19
1.19
AE-2130
ASF-9810F
ASF-9810FM
ASF-9810FL
LT-1220
LT-1100
1.23
1.33
1.31
1.31
1.2
1.2
1.23
1.33
1.31
1.31
1.2
1.2
2.8***
2.8***
55***
55***
60***
60***
40***
40***
22(300°C, 1.2kgf/cm2)
22(300°C, 1.2kgf/cm2)
2
11.5(300°C, 1.2kgf/cm ) 11.5(300°C, 1.2kgf/cm2)
0.5-0.7
500
45
700
70
18,000
2,000
70
66
-
-
120
0.3-0.5
1.8-2.0
1.43-1.75
1.43-1.75
0.5-0.7
0.5-0.7
580
620
550
600
640
640
57*
56
58
58
66
65
830
750(10mm/min)
850*
850
850
920
83
83
80
80
92
92
25,000
25,000
26,500*
25,500
23,000
23,000
2,430
2,384
2,320
2,300
2,300
2,300
56*
20*
3.5
4
3*
72*
40
3.6
3.5
5
70
80
120
116
116
120
120
117
116
116
120
120
132
180
185
144
145
SR-0300
1.05
1.05
13
13
0.4-0.6
450*
45
620
74
23,000
2,500
30*
22
110
108
102
SR-0320 K
SR-0325LT
SR-0330M
HP-1000X
HP-1000XA
HP-1000XG
WP-1069
WP-1089
WR-9330I
WR-9370
WR-9370
1.06
1.06
1.06
1.15
1.13
1.15
1.13
1.14
1.07
1.09
1.1
1.06
1.06
1.06
1.15
1.13
1.15
1.13
1.14
1.07
1.09
1.1
8.5
4
3
6***
28*
37*
47*
47*
5
4
4
8.5
4
3
6***
28*
37*
47*
47*
5
4
4
0.4-0.6
0.4-0.6
0.4-0.6
0.5-0.7
0.5-0.7
0.3-0.5
0.5-0.6
0.5-0.6
0.4-0.7
0.4-0.7
0.4-0.7
420*
440*
450*
570
550
650
540
540
480
470*
540*
45
51
50
54
51
60
53
52
51
48
60
650
620
670
810
750
900
800
770
710
650
790
81
85
89
77
78
95
82
80
80
77
99
22,000
21,000
22,000
23,000
20,500
24,000
22,500
21,500
23,000
20,000
24,000
2,700
2,800
2,700
1,978
2,107
2,500
2,300
2,200
2,600
2,285
2,950
19
12
17*
58
45
15
58*
60*
14*
20
12*
15
14
11
60
50
50
48
51
10
14
7
110
113
114
115
113
120
116
108
107
106
115
106
109
109
116
111
120
114
110
108
110
116
106
113
116
129
123
130
124
120
104
108
118
Automotive Material Solutions
27
Integrated Solutions
Global Network
We provide integrated solutions to help you to be more innovative
and more efficient. To enhance long-term success of our customers
and partners we have developed sustainable and advanced
products and solutions.
China
Jakarta
Global Subsidiary (5)
Sales Office (18)
Plant (5)
Los Angeles
San Diego
Detroit
SOUTH KOREA
Thailand
Germany
USA
Sanghai
Tianjin
Dongguan
Shenzhen
Indonesia
Headquarters (1)
Uiwang
Yeosu
Gumi
Busan
Gwangju
Bangkok
Frankfurt
Slovakia
Bratislava
India
Chennai
Delhi
Mumbai
Italy
High-performance &
differentiation
Speedy development
Cost reduction
Kuala Lumpur
Advanced design &
material solution
Hungary
Kornye
Global Supply
Chain
Solution
Design
Solution
Advanced technology,
CAE support
Integrated
Solutions
Technical
Solution
Eco way
Solution
Global production &
supply system
Global tech support
Enhancing productivity
Process solution
Global quality control
Eco-friendly production process
Non-painting materials
PCM based recycled plastics
SAMSUNG SDI
Tijuana
Vietnam
Hanoi
Istanbul
Japan
Tokyo
Nagoya
Osaka
HEADQUARTERS
SALES / SERVICE OFFICE
SAMSUNG SDI Co., Ltd.
56, Gosan-ro, Uiwang-si,
Gyeonggi-do, 437-711, Korea
Tel: +82-31-596-3408
Fax: +82-31-596-3490
E-mail: chemical@samsung.com
Asia
Shenzhen, China
Tel: +86-755-8203-2323
E-mail: evone.chen@samsung.com
Tianjin, China
Tel: +86-22-2836-4261
E-mail: zhengdao.lee@samsung.com
global subsidiary
Nagoya, Japan
Tel: +81-52-569-1807
E-mail: boin56.noh@samsung.com
Los Angeles, USA
Samsung Chemical Inc.
Tel: +1-562-229-1307
E-mail: james.ham@samsung.com
Osaka, Japan
Tel: +81-6-6949-3162
E-mail: f.naoki@samsung.com
Frankfurt, Germany
Samsung Chemical Europe GmbH
Tel: +49-6196-66-7470
E-mail: knlee74@samsung.com
Shanghai, China
Samsung Chemical Material Trading
(Shanghai) Co., Ltd.
Tel: +86-21-6270-3000 (810)
E-mail: longquan.jin@samsung.com
Bangkok, Thailand
Samsung Chemical Thailand
Tel: +66-2-624-6726
E-mail: s.natthaphon@samsung.com
Tokyo, Japan
Samsung Chemical Inc.
Tel: +81-3-6369-6419
E-mail: c77.song@samsung.com
28
Turkey
Application development
Material
Solution
Mexico
Malaysia
Milano
Broad product line-up
Kuala Lumpur, Malaysia
Tel: +60-3-2283-3714
E-mail: n.okamoto@samsung.com
Chennai, India
Tel: +91-44-4299-4255
E-mail: sundar.tr@samsung.com
Delhi, India
Tel: +91-124-4153-804
E-mail: yogi.g@samsung.com
Mumbai, India
Tel: +91-22-6143-8315
E-mail: jitendra.mi@samsung.com
Hanoi, Vietnam
Tel: +84-241-369-9531
E-mail: phamminh.tue@samsung.com
Jakarta, Indonesia
Tel: +62-21-3005-3541
E-mail: jarimin.sari@samsung.com
Europe
Bratislava, Slovakia
Tel: +421-90-170-2001
E-mail: jh2407.kim@samsung.com
Istanbul, Turkey
Tel: +90-212-437-8101~6
E-mail: jinhee1.cho@samsung.com
Milano, Italy
Tel: +39-2-83111840
E-mail: yk.k@samsung.com
America
San Diego, U.S.A.
Tel: +1-619-297-0362
E-mail: ts481.choi@samsung.com
Detroit, U.S.A.
Tel: +1-248-979-9211
E-mail: john11.park@samsung.com
PLANT
Yeosu, Republic of Korea
Tel: +82-61-689-1221
E-mail: heuicheol.lee@samsung.com
Tianjin, China
Tel: +86-22-5868-0291
E-mai: mc007.jeon@samsung.com
Kornye, Hungary
Tel: +36-34-814-120
E-mail: bt.hyun@samsung.com
Tijuana, Mexico
Tel: +52-664-627-4947
E-mail: psy13560@samsung.com
Automotive Material Solutions
29
SAMSUNG SDI – Chemical
Value+ your imagination
We provide value to turn your imagination
into reality with our innovative materials and
optimal solutions.
Note The information contained herein is provided by SAMSUNG SDI Co., Ltd. and its subsidiaries and affiliates
(collectively referred to as “SAMSUNG”) for information purposes only and should be used by individuals
with technical experience and knowledge in the area. SAMSUNG SDI does not make any representation or
warranties of the usefulness or expected result of the information, and does not assume any responsibility
whatsoever related to the use of the information. SDI-C-A-032014
30
SAMSUNG SDI
www.samsungchemical.com