Lighting the Ceiling Style 147 Style 147 T5 Fluorescent Xtra small enclosed wall mount uplight, integral Lens 1:8 Scale J Mounting Plate B 24" (610mm), 36" (915mm), 48" (1220mm) 4" max. (102mm) 1/8" (3mm) F A B C D E 5" (127mm) C K 1/8" (3mm) Decorative End Plate 1:8 Scale 2. Hang housing, connect supply 3. Hinge up, secure with screws 4. Front shield hinges down to install lamps and lens H J L Specifications Features D Electronic ballast E Extruded aluminum mounting plate F Clear UV resistant acrylic lens Finish: Matte white housing, decorative front shield, and decorative end plates and reveal plates. Decorative illuminated front shield is available in three patterns and is lined with a frosted plastic diffuser, or choose a solid non-illuminated front shield. Custom patterns for front shield available, consult factory. Painted surfaces – 6 stage pretreatment and electrostatically applied thermoset powder coat for stable, long lasting and corrosion resistant finish. Reflector – extruded high purity aluminum with clear anodized specular finish. All luminaire hardware – stainless steel. Mounting: Mounting plate fastens flush to wall. Housing hinges on plate for hands free access to wiring. G Mounting holes, 9/32" (7mm) dia. H Conduit entry, (2) 7/8" (22mm) dia. J Aluminum decorative end plates (order separately) U.S. Patents 6,652,118 B2; 6,860,618 B2. K Aluminum joiner/reveal plates (white) L Structure and fasteners (by others) M Conduit and connector (by others) Electrical: Use 90°C wire for supply connections and through wire. 7/8" (22mm) diameter knockouts located at each end of mounting plate for conduit feed (by others). Housing hinges down for access to ballast and wiring. Optional #12 AWG prewired modular through wiring with quick connectors. Integral electronic HPF thermally protected class P ballast with end-of-life protection. Optional electronic dimming ballast; compatible dimmer switch required (by others). Consult sales representative for compatibility and specifications. Optional integral emergency battery operates one lamp. Separate unswitched supply is required. Optional occupancy sensor with 50%/100% step dimming ballast. Standard: UL listed or CSA certified. 11/11 S M 3-1/2" (89mm) A Specular extruded aluminum reflector B Decorative illuminated glowing front shield or solid non-illuminated C Extruded aluminum housing C 5. Close shield L G E 2-7/8" (73mm) B Installation 1. Secure mounting plate to wall 2" (52mm) A ADA compliant – ideal for hospital and school corridors Xtra small reflector positioned for uplighting of low, narrow spaces Patterned glowing front shield also illuminates wall below Clear lens for safety and easy maintenance Through-wired continuous row or individually mounted Performance Two parabolic reflector sections drive light across the ceiling from one edge. An elliptical section redirects its light to a parabola and shields the lamp from normal viewing angles. Glare is minimized and asymmetry of the beam is maximized resulting in high beam efficiency and superior surface uniformity. For complete photometrics, visit thelightingquotient.com 54W 1500 Cd 28W 0 C 15.2 To Order Style 147 Project: To form a Catalog Number -W - F 1 4 7 -T 1 2 3 4 -L 5 6 7 6 Finish 8 9 1 Source F = Linear fluorescent 2 Style 3 Lamp = T5 Fluorescent Lamp Code Lamp Wattage (see chart below) Configuration of Lamps, specify 1 or 3 Reflector Configuration 1-Lamp Ballast 1 1 Housing 2-Lamp Ballast 3 2 Housings (Master/Satellite) Lamp Wattage Electronic 1 = 120V 2 = 277V 3 = 347V (Canada) Order separately. See Accessories Section for specifications. ADE47 Dimming* T = 120V V = 277V * Availability for wattages and voltages varies with ballast manufacturer and control type – see thelightingquotient.com for additional dimming specifications and limitations. L0 = No option LE = Integral emergency battery pack with indicator lamp and test button. Operates one lamp. Only available for lamp codes T128, T328, T155, and T355. LK = Prewired modular #12 AWG through wiring with quick connectors. LC = Combination of emergency battery pack and prewired modular through wiring as described above. Only available for lamp codes T128, T328, T155, and T355. LP = Passive infrared occupancy sensor to switch unit on/off or between high and low output with dimming ballast (consult factory for ballast options). LX = For modification not listed, include detailed description. Consult factory prior to specification. 2' Lamp Wattage (Lamp Number) T5 T5 HO 14 (F14T5) 24 (F24T5/HO) 3' 21 (F21T5) 39 (F39T5/HO) 9 Destination Requirement 4' 28 (F28T5) 55 (F54T5/HO) 0 = UL listed or CSA certified for U.S. J = UL listed or CSA certified for Canada Lamp Length (nominal) For complete lamp and ballast information, see Accessories Section. Standard T5 lamp color is 3000K/80+ CRI. 4 Mounting 0 = Decorative end plates, pair One set required for each row or single unit. Adds 1/4" (6mm) to length. 22 = Matte white 99 = Custom RAL or computer matched color to be specified Options Specify option codes in base fixture catalog number. LK Prewired modular through wiring with quick connectors. LP Passive infrared occupancy sensor to switch unit on/off or between high and low output with dimming ballast (consult factory for ballast options). sensor Example W = Wall mount 5 Shield Configuration A = Illuminated design “A” B = Illuminated design “B” C = Illuminated design “C” S = Non-illuminated design “S” 12/11 = Matte white = Custom RAL or computer matched color to be specified, consult sales representative 8 Option (See Accessories Section for specifications) Example: T128 = one 4' (1.22m) housing with one 28W T5 lamp C 15.3 2 9 Accessories 7 Voltage/Ballast 147 = Xtra small enclosed wall mount uplight (ADA compliant) T Type: F147 - T328 - W - B2 - 2 - LK0 Xtra small enclosed wall mount uplight for use with two 4' F28T5 lamps, Two housings (master/satellite) are each 48" long, not including decorative end plates. Wall mount. Illuminated shield pattern B. Matte white finish. Integral 277V electronic ballast. Clear lens. Modular through-wiring with quick connectors. UL listed or CSA certified for U.S. Order decorative end plates separately. elliptipar from The Lighting Quotient 114 Boston Post Road, West Haven, Connecticut 06516, USA Voice 203.931.4455 Fax 203.931.4464 thelightingquotient.com Certain products illustrated may be covered by applicable patents and patents pending. These specifications supersede all prior publications and are subject to change without notice. Copyright © 2011 Sylvan R. Shemitz Designs, Inc., all rights reserved.