1
2
3
4
6
7
8
NOTES:
D.O.P. PORT
EXHAUST DAMPER
INLET DAMPER
5
INLET PREFILTER
REV
DESCRIPTION
DATE
DRN
APP-BY
APP-DATE
A
ORIGINAL RELEASE
-
-
-
-
1. ELECTRICAL REQUIREMENTS: 115 VAC, 20 AMP, 60 Hz, SINGLE PHASE
POWER CORD: 14 FT[4.29M] EXTERNAL LENGTH WITH NEMA 5-20P PLUG
2. CONSTRUCTION:
WORKSURFACE / WORK AREA: 16 GA[1.5MM] & 18 GA[1.2MM]., 304 SS, #4 FINISH
ACCESS PANELS, BLOWER SECTION: 16 GA[1.5MM]. & 18 GA[1.2MM]., CRS,
BAKED ENAMEL FINISH, BAKER PERMA WHITE.
VIEWSCREEN: FRAME, 16 GA[1.5MM]., 304 SS
¼"[6.4MM] THICK, LEXAN
D
D
PASS THROUGH DOOR: ¼"[6.4MM] THICK, LEXAN
3. FILTER, MOTOR, BLOWER AND ALL ELECTRICAL COMPONENTS ARE FRONT ACCESSIBLE.
4. OPTIONAL PLUMBING RIGHT SIDE
A. PETCOCKS RECOMMENDED FOR USE WITH NONFLAMMABLE GAS, AIR OR VACUUM
AT 30 PSI MAXIMUM OPERATING PRESSURE.
PLEASE ADVISE OF ANY SPECIAL PLUMBING
REQUIRED BY YOUR LOCAL PLUMBING CODES; (IE BLACK IRON)
SECTION A-A
B. CABINET PLUMBING CONNECTORS ARE 3/8[9.5MM] PARKER FITTINGS.
A 3/8[9,5MM] NPT ADAPTER IS SHIPPED WITH THE CABINET
FLUORESCENT LIGHT
SUPPLY HEPA
FILTER
53 3/4
1365.93MM
A
C
SUPPLY DIFFUSER
ELECTRICAL ACCESS PANEL
C
MULTI POSITION
IV BAR
DIVIDER BETWEEN
WORK CHAMBER AND
PASS THROUGH
VERTICAL SLIDING
DOOR
MAG. GAUGE FOR
WORK CHAMBER
GLOVEPORT WITH
TWO-PIECE GLOVE
26 9/16
23 7/16 674.55MM
20 9/16 595.01MM
521.55MM
FLAT WORKSURFACE
29 1/2 WIDE IN WORK CHAMBER
18 9/16 WIDE IN PASS THRU
MAG. GAUGE FOR
PASS THRU
77 5/16
1963.34MM
SHIPPING
HEIGHT
B
BALL VALVE DRAIN
1/2" NPT
59 11/16
1515.67MM
CABINET
CONTROLS
2 13/16
71.63MM
TO WORKSURFACE
VIEWSCREEN
LATCH
HINGED
VIEWSCREEN
PASS - THROUGH
DOOR
B
13 1/2
343.05MM
VIEWSCREEN
LATCH
1/2
12.7MM
1 1/8
28.39MM
4 3/4
119.96MM
28 1/8
714.36MM
21 1/8
536.59MM
WORKSURFACE
36 5/8
930.26MM
IMPORTANT NOTE: THIS IS A PRODUCT PROTECTION
CABINET AND OFFERS NO CONTAINMENT
5 3/16
132.17MM
2 1/2
63.5MM
A
30 9/16
776.34MM
A
TYP
33 1/4
845.27MM
UNLESS OTHERWISE SPECIFIED
DO NOT SCALE DRAW ING
REMOVE ALL BURRS AND SHARP EDGES
U.S. CUSTOMARY TOLERANCES: (INCHES)
DECIMALS
NOTES:
1. CABINET WEIGHT = 650 LBS.
MACHINED
SHEET METAL
.X
±.02
±.06
.XX
±.01
±.03
.XXX
±.005
FRACTIONS
FINISH:
ANGULAR
±0'-30° (.5°)
THIS DRAWING AND ITS CONTENTS ARE THE
PROPERTY OF THE BAKER COMPANY. THE
INFORMATION CONTAINED HERE ON MAY NOT BE
USED OR COPIED IN ANY MANNER W ITHOUT THE
WRITTEN PERMISSION OF THE BAKER COMPANY.
SterilSHIELD (4FT) - SS400
THIRD ANGLE
±.010
NO 4
PROJECTION
SIZE
DRAWN
DATE
8/10/2007
C.W.Q., JR.
CHECKED
SCarpenter
1
2
3
4
5
6
161 Gatehouse Rd., Sanford, Maine 04073 USA
“Creating Immaculate Atmospheres”
TITLE
±1/32
125
THE BAKER COMPANY
BGA-SS400
SCALE
DATE
8/10/2007
7
REV
DWG NO
D
SQUARE FOOTAGE
SHEET
-
8
A
1 OF 1
A