ds series - U.S. Architectural Lighting

advertisement
DS SERIES
Neo Classic
Area Luminaires
Contemporary Relevance
Traditional Elegance
Overview
The DS Series by U.S. Architectural/Sun Valley Lighting is the epitome of the
“Knob and Shade” style luminaire. The bold aesthetic elements, from the
variety of shade styles to the decorative luminous treatments, allow the DS
Series to be configured to match any architectural context. Additionally, a
wide selection of optical approaches provide the lighting professional with
the tools to address environments that demand performance driven light
levels or that require soft, decorative illumination.
From HID to LED, no other product of its kind presents such a vast collection
of aesthetic and performance features as does the DS Series from U.S.
Architectural/Sun Valley Lighting.
Aesthetic Elements
Standard Housing
Performance (Optical) Selections
-B
Unlit Bands
Standard Lens
Clear linear prismatic glass
lens. Optional opal glass.
-L
Uplight Windows
-M
Uplight Windows w/Bands
-P
Horizontal Lamp Reflector
Segmented optics in IES
distribution Types II, III, IV,
and V-SQ; also Forward Throw
and perimeter specific optics.
Available in models with -P; -L;
-M suffix.
1
-A
Angled Shade
-C
Convex Shade
-D
Domed Shade
T
Tiered Shade
-H
Half Domed Shade
-- S
Skirted Shade
U.S.ARCHITECTURAL/SUN VALLEY LTG.
-R
Refractor
Clear polycarbonate refractor,
IES distribution Types II, III, IV, and
V. Optional clear acrylic.
-P
Vertical Lamp Reflector
Segmented optics in
asymmetric and symmetric
distributions. Available in
models with –P suffix only.
www.usaltg.com
Table of Contents
The combination of relevant Aesthetics and Performance driven optics.
DSA
DSD
Pages 9-12
DSAP
DSDP
HID - 175W Max
LED - 60W Max
DSC
DST
Pages 13-16
HID - 175W Max
LED - 60W Max
HID - 250W Max
LED - 60W Max
HID - 250W Max
LED - 60W Max
Pages 41-44
HID - 400W Max
Pages 45-48
HID - 250W Max
DSAPM
DSDPM
HID - 175W Max
LED - 60W Max
DSARB
DSCRB
Pages 29-32
HID - 250W Max
LED - 132W Max
DSCPL
DSTPL
DSH
DSHR
Pages 25-28
Pages 37-40
DSAPL
DSDPL
DSCR
DSTR
Pages 21-24
HID - 400W Max
LED - 132W Max
DSCP
DSTP
DSAR
DSDR
Pages 17-20
Pages 33-36
Pages 49-52
HID - 400W Max
DSCPM
DSTPM
HID - 250W Max
LED - 60W Max
Pages 53-56
HID - 250W Max
DSS
Pages 57-60
www.usaltg.com
HID - 400W Max
LED - 132W Max
U.S.ARCHITECTURAL/SUN VALLEY LTG.
2
AESTHETIC
Residential
SNTS 104-11/DSAPL1/Custom Arm/PT27/RAL-9005
700-1035T-28’/DSCRB25/XPG-1/PT27RAL-9005
3
U.S.ARCHITECTURAL/SUN VALLEY LTG.
4300-1058C-7’/DSA1/XBM-1/PT27/Custom Color
www.usaltg.com
Streetscapes
100-1030C Mod-7’/DSAP1/WA/XPM-2-180/PT27/Custom Color
SPCL-16’/DSH1-WGD/XZY-SPCL-1/RAL-6005/FBA
3900SB-1046T-40’/DSA1/Custom Arm-1/PT27/RAL-6005-T
www.usaltg.com
U.S.ARCHITECTURAL/SUN VALLEY LTG.
4
AESTHETIC
Infrastructure
RTA 1443-125/DSS1/XPD-2-180/PT27/RAL-9005
RNTA 84-125/DSCRB1/XBC-3-120/PT27/RAL-6005/RBC
RTA 1443-125/DSAPL1/WA/XPD-2-180/PT27RAL-9005
5
U.S.ARCHITECTURAL/SUN VALLEY LTG.
www.usaltg.com
Commercial
4300-1050-13’/DSDR/XBZ Mod-1/PT27/RAL-8019
4200-1040-17’/DSAP1/XPK-1/PT27/RAL-8019/RBA-2
4200-1040-17’/DSAP1/XPK-1/PT27/RAL-8019/RBA-2
www.usaltg.com
4300-1050-13’/DSDR/XBZ Mod-2/PT27/RAL-8019
U.S.ARCHITECTURAL/SUN VALLEY LTG.
6
PERFORMANCE
HID Segmented Reflectors
Horizontal Lamp
Vertical Lamp
Reflectors are formed
as one piece from
highly specular
reflector sheet
material.
Reflectors are formed
as one piece from
highly specular
reflector sheet
material.
Convex lens supplied
with all vertical lamp
models. DSS1 may
also use a flat glass
lens for cut-off.
Available in Models:
DSAP/DSCP/DSDP/DSTP/
DSAPL/DSCPL/DSTPL/
DSAPM/DSCPM/DSDPM/
DSTPM
DSS
Med. Base
175W
150W
100W
70W
50W
39W
Med. Base
200W
175W
150W
100W
70W
50W
G Base
150W
70W
Mogul Base
250W
G Base
150W
70W
39W
Available in Models:
DSAP/DSCP/DSDP/DSTP/
DSS
Mogul Base
400W
350W
320W
250W
Med. Base
175W
150W
100W
70W
50W
39W
Med. Base
200W
175W
150W
100W
70W
50W
Mogul Base
400W
350W
320W
250W
PGZ18 Base
315W
210W
G Base
150W
70W
39W
G Base
150W
70W
PGZ18 Base
315W
210W
Mogul Base
250W
Horizontal lamp
reflectors produce
very sharp cutoff
with good uniformity.
7
Type II
Type III
FT-HSC
Type V Sq.
U.S.ARCHITECTURAL/SUN VALLEY LTG.
Type IV
Vertical lamp
reflectors produce
excellent uniformity
with slightly greater
high angle output.
Type III
Type IV
Type V Sq.
www.usaltg.com
®
See
®
®
Optical Systems
Catalog for a complete presentation on the
Module
®
System.
LED Power Tower Module
TM
®
U.S. Architectural’s
system is both unique and
innovative within the lighting
industry. It is a self contained
module, totally sealed from
the elements, complete with
LEDs and optics enclosed in
a precise cast housing, heat
sinked and entirely sealed by
a tempered glass lens to
meet IP67 rating .
Driver
Driver Bracket
(Driver Bracket
separates the
driver and optical
compartments)
This totally enclosed system
enhances the LED’s long life
and reduced energy.
Optical Tower
Available in Models:
DSAP/DSCP/DSDP/DSTP/DSS
No. of
LEDs
System
Watts
120
80
64
132
88
71
HID
Equivalent
250PSMH
150PSMH
100PSMH
Optical Tower
- Tower consists of an array of 6 LED Capsules
aimed 60° apart and mounted to a barrier plate separating the optical
compartment from the driver compartment. The array is covered by a
clear tempered glass linear prismatic diffuser (IES Type V-Round) or
clear polycarbonate refractor (IES Types II, III, IV, V-Round).
LED Capsules - Each capsule consists of 6 LED’s mounted to a
vented circuit board heat-sinked on the back. Each LED has a specular,
formed reflector that directs output downward through a diffuse acrylic
lens that encloses each capsule.
System Wattage - 60W
Models:
Max CP Curve for 120
®
Module
0% of Total Light Output
occurs at or above
horizontal.
Less than 3% of Total
Light Output occurs
above 75°.
DSA/DSC/DSD/DST/DSH use clear tempered glass linear prismatic
diffuser.
Models:
DSAR/DSCR/DSDR/DSTR/DSHR/DSARB/DSCRB use clear
polycarbonate refractor.
Clear Tempered
Glass Linear
Prismatic Diffuser
Type II
Type III
Type IV
Type V Sq.
www.usaltg.com
Type V Rd.
Polycarbonate Rerfractor
Type II
Type III
Type IV
Type V Sq.
U.S.ARCHITECTURAL/SUN VALLEY LTG.
8
DSA
DSD
Straight Sided Shade
Curved Sided Shade
Glass Diffuser
Glass Diffuser
(inside)
DSD1
DSA1
175W Max.
EPA: 0.83
Max. Wt: 19lbs
175W Max.
EPA: 0.97
Max. Wt: 27lbs
17"
(432mm)
20"
(508mm)
20.5"
14"
(521mm)
(356mm)
14"
(356mm)
DSD2
DSA2
100W Max.
EPA: 0.65
Max. Wt: 13lbs
17"
(432mm)
100W Max.
EPA: 0.59
Max. Wt: 12lbs
15.5"
(794mm)
14"
(356mm)
13"
(330mm)
15.5"
(394mm)
14"
(356mm)
13"
(330mm)
SCALE: 3/8" = 1'-0"
9
U.S.ARCHITECTURAL/SUN VALLEY LTG.
www.usaltg.com
DSA/DSD
Fixture Specifications and Ordering
Ballast
Housing
Socket
Fixture
Spec/Order
from this
page.
Diffuser
Lamp
by Others
Housing – Ballast housing is spun from .080" aluminum. Internal ballast support bracket
also functions as mounting reinforcement plate with a minimum thickness of .125".
Optical housing is spun from .080" aluminum, hemmed at the edges and internally
finished in high-gloss white paint for maximum reflectance.
Arms, Poles
and Bases
See pages 11 & 12
for suggested Arm,
Pole and Base
combinations.
Mounting – When pendant mounted, the fixture housing is connected to the mounting
arm by the Trulevel swivel which is internally welded to the housing and allows for fixture
leveling prior to locking the swivel. When side arm mounted, the housing is externally
welded to the mounting arm and the weld is blended to produce a smooth, continuous
joint.
Optics – Refer to page 62 for Optical System Specification.
Electrical Components – Refer to page 62 for Electrical Components Specification.
Finish – Electro-statically applied TGIC Polyester Powder Coat on substrate prepared with
20psi power wash at 140°F. Four step Iron phosphate pretreatment for protection and
paint adhesion. 400°F bake for maximum hardness and durability.
Spec/Order Example: DSA1/100PSMH277E/CPG/1/RAL9005-T
MODEL
LAMP/BALLAST MODE
WATTS
TYPE
VOLTS
OPTICS
STANDARD
MOUNTING
FINISH
ARM MOUNT
STANDARD
TEXTURED FINISH
STANDARD MAGNETIC BALLAST
DSA1
DSD1
175
3
150T
150
100
3
70T
70
2
48LED
PSMH
HPS
120
208
240
277
347 (CAN)
480
E (ELECTRONIC)
STANDARD MAGNETIC BALLAST
DSA2
E
1, 2
PSMH
HPS
OPTIONAL
WDG
OPAL GLASS DIFFUSER
2
100
3
70T
70
50
3
39T
CPG
CLEAR LINEAR
PRISMATIC
TEMPERED GLASS
120
208
240
277
347 (CAN)
480
(ANNEALED AND HEAT
RESISTANT)
1...............
BLACK
RAL-9005-T
2-180 . . . . . . . . .
WHITE
RAL-9003-T
3-120 . . . . . . . . .
GREY
RAL-7004-T
4-90 . . . . . . . . . .
DARK
BRONZE
RAL-8019-T
WALL MOUNT
WM . . . . . . . . . . . . .
GREEN
RAL-6005-T
FOR SMOOTH
FINISH REMOVE
SUFFIX “T”
(EXAMPLE:
RAL-9005)
OPTIONS
3/8" IPS STEM MOUNT
AND SWIVEL CANOPY
(4'-0" MAX.) . . . . . . . . . . . . . . SM38
CHAIN MOUNTED
(4'-0" MAX.) . . . . . . . . . . . . . . CM
HOUSE SIDE SHIELD
90° . . . . . . HS 90°
135° . . . . . . HS 135°
180° . . . . . . HS 180°
PHOTO CELL + VLOTAGE
(EXAMPLE: PC120V) . . . . PC+V
SINGLE FUSE
(120V, 277V) . . . . . . . . SF
DOUBLE FUSE
(208V, 240V) . . . . . . . . DF
(ELECTRONIC)
DSD2
1 – 50W ONLY
2 – 120 THRU 277 ONLY
3 – G12 BASE
CONSULT FACTORY FOR OTHER BALLAST
CONFIGURATIONS AND LAMP OPTIONS
www.usaltg.com
CONSULT FACTORY
FOR CUSTOM COLORS
U.S.ARCHITECTURAL/SUN VALLEY LTG.
10
Suggested DSA Combinations
For additional Contemporary
Shafts, Arms and specifications,
please
refer
to
the
U.S.
Architectural Lighting binder or
our website, www.usaltg.com.
28'
26'
24'
22'
20'
18'
16'
LIGHTING
U.S. ARCHITECTURAL
14'
12'
10'
RBA
ROTATABLE
BANNER ARM
8'
6'
4'
2'
Fixture
DSA2
DSA1
DSA1
DSA2
Arm
XWB
XPS-2
XPJ
XPK-WM
1040
RTA 2064-188
6" to 4" Dia. Tapered Alum.
5" Dia. Fluted Alum.
1070
-
8500
-
1400
-
Pole
Base
11
4" Dia. Alum.
U.S.ARCHITECTURAL/SUN VALLEY LTG.
www.usaltg.com
Suggested DSD Combinations
For additional Decorative Arms,
Shafts, Bases and specifications,
please refer to the Sun Valley
Lighting binder or our website,
www.usaltg.com.
28'
26'
24'
22'
20'
18'
16'
14'
12'
FSS2
FIXED
STREET SIGN
10'
8'
6'
4'
B31EL-CAP
BOLLARD
2'
Fixture
DSD1
DSD1
DSD1
DSD2
Arm
XPG
XBC
XPC-2
XPK-WM
Pole
1046T
TFS 1953-11
1040
-
Base
3100
4300B
5200
-
www.usaltg.com
6" to 4" Dia. Tapered Alum.
5" to 3" Dia. Fluted, Tapered Steel
4" Dia. Alum.
U.S.ARCHITECTURAL/SUN VALLEY LTG.
12
DSC
DST
Curved Sided Shade
Straight Sided Shade
Glass Diffuser
Glass Diffuser
DST1
DSC1
175W Max.
EPA: 0.78
Max. Wt: 18lbs
175W Max.
EPA: 0.78
Max. Wt: 17lbs
16.5"
(419mm)
22"
(559mm)
22"
14"
(559mm)
(356mm)
14"
(356mm)
DST2
DSC2
100W Max.
EPA: 0.50
Max. Wt: 12lbs
16.5"
(419mm)
100W Max.
EPA: 0.48
Max. Wt: 7lbs
15.5"
(394mm)
14.5"
(368mm)
13"
(330mm)
15.5"
(394mm)
14.5"
(368mm)
13"
(330mm)
SCALE: 3/8" = 1'-0"
13
U.S.ARCHITECTURAL/SUN VALLEY LTG.
www.usaltg.com
DSC/DST
Fixture Specifications and Ordering
Ballast
Housing
Fixture
Spec/Order
from this
page.
Socket
Diffuser
Lamp
by Others
Housing – Ballast housing is spun from .080" aluminum. Internal ballast support bracket
also functions as mounting reinforcement plate with a minimum thickness of .125".
Optical housing is spun from .080" aluminum, hemmed at the edges and internally
finished in high-gloss white paint for maximum reflectance.
Arms, Poles
and Bases
See pages 15 & 16
for suggested Arm,
Pole and Base
combinations.
Mounting – When pendant mounted, the fixture housing is connected to the mounting
arm by the Trulevel swivel which is internally welded to the housing and allows for fixture
leveling prior to locking the swivel. When side arm mounted, the housing is externally
welded to the mounting arm and the weld is blended to produce a smooth, continuous
joint.
Optics – Refer to page 62 for Optical System Specification.
Electrical Components – Refer to page 62 for Electrical Components Specification.
Finish – Electro-statically applied TGIC Polyester Powder Coat on substrate prepared with
20psi power wash at 140°F. Four step Iron phosphate pretreatment for protection and
paint adhesion. 400°F bake for maximum hardness and durability.
Spec/Order Example: DSC2/100PSMH120/WGD/1/RAL9003
MODEL
LAMP/BALLAST MODE
WATTS
TYPE
VOLTS
OPTICS
STANDARD
MOUNTING
FINISH
ARM MOUNT
STANDARD
TEXTURED FINISH
STANDARD MAGNETIC BALLAST
DSC1
DST1
175
3
150T
150
100
3
70T
70
2
48LED
PSMH
HPS
120
208
240
277
347 (CAN)
480
E (ELECTRONIC)
(ANNEALED AND HEAT
RESISTANT)
STANDARD MAGNETIC BALLAST
DSC2
E
1, 2
PSMH
HPS
OPTIONAL
WDG
OPAL GLASS DIFFUSER
2
100
3
70T
70
50
3
39T
CPG
CLEAR LINEAR
PRISMATIC
TEMPERED GLASS
120
208
240
277
347 (CAN)
480
1...............
BLACK
RAL-9005-T
2-180 . . . . . . . . .
WHITE
RAL-9003-T
3-120 . . . . . . . . .
GREY
RAL-7004-T
4-90 . . . . . . . . . .
DARK
BRONZE
RAL-8019-T
WALL MOUNT
WM . . . . . . . . . . . . .
GREEN
RAL-6005-T
FOR SMOOTH
FINISH REMOVE
SUFFIX “T”
(EXAMPLE:
RAL-9005)
OPTIONS
3/8" IPS STEM MOUNT
AND SWIVEL CANOPY
(4'-0" MAX.) . . . . . . . . . . . . . . SM38
CHAIN MOUNTED
(4'-0" MAX.) . . . . . . . . . . . . . . CM
HOUSE SIDE SHIELD
90° . . . . . . HS 90°
135° . . . . . . HS 135°
180° . . . . . . HS 180°
PHOTO CELL + VLOTAGE
(EXAMPLE: PC120V) . . . . PC+V
SINGLE FUSE
(120V, 277V) . . . . . . . . SF
DOUBLE FUSE
(208V, 240V) . . . . . . . . DF
(ELECTRONIC)
DST2
1 – 50W ONLY
2 – 120 THRU 277 ONLY
3 – G12 BASE
CONSULT FACTORY FOR OTHER BALLAST
CONFIGURATIONS AND LAMP OPTIONS
www.usaltg.com
CONSULT FACTORY
FOR CUSTOM COLORS
U.S.ARCHITECTURAL/SUN VALLEY LTG.
14
Suggested DSC Combinations
For additional Contemporary
Shafts, Arms and specifications,
please
refer
to
the
U.S.
Architectural Lighting binder or
our website, www.usaltg.com.
28'
26'
24'
22'
20'
18'
16'
14'
12'
10'
8'
6'
4'
B32EL-CAP
BOLLARD
2'
15
Fixture
DSC2
DSC1
DSC1
DSC2
Arm
XWA
XPD-2
XPE
XBC-WM
Pole
1040
4" Dia. Alum.
4" Dia. Fluted Alum.
5.25" to 3.5" Cast, Fluted, Tapered Alum.
1030C
-
Base
400
4200
3300
-
U.S.ARCHITECTURAL/SUN VALLEY LTG.
1060
www.usaltg.com
Suggested DST Combinations
For additional Decorative Arms,
Shafts, Bases and specifications,
please refer to the Sun Valley
Lighting binder or our website,
www.usaltg.com.
28'
26'
24'
22'
20'
18'
16'
14'
12'
10'
8'
6'
4'
2'
Fixture
DST1
DST1
DST1
DST2
Arm
XPJ
XPK-2
XBB
XPS-WM
Pole
RNTA 205-188
5" Dia. Alum.
4" Dia. Fluted Steel
6" to 4" Dia. Tapered Alum.
RTA 1964-188
-
Base
4400SB
3200SB
4000SB
-
www.usaltg.com
1060STL
U.S.ARCHITECTURAL/SUN VALLEY LTG.
16
DSAR
DSDR
Straight Sided Shade
Curved Sided Shade
Prismatic Refractor
Prismatic Refractor
DSAR25
250W Max.
EPA: 1.38
Max. Wt: 31lbs
22"
(559mm)
25"
(635mm)
18"
(457mm)
DSDR1
DSAR1
150W Max.
EPA: 0.99
Max. Wt: 21lbs
150W Max.
EPA: 1.04
Max. Wt: 23lbs
19"
(483mm)
20"
(508mm)
14"
(356mm)
17.5"
(445mm)
21.5"
(546mm)
14"
(356mm)
SCALE: 3/8" = 1'-0"
17
U.S.ARCHITECTURAL/SUN VALLEY LTG.
www.usaltg.com
DSAR/DSDR
Fixture Specifications and Ordering
Ballast
Fixture
Spec/Order
from this
page.
Housing
Socket
Lamp
by Others
Refractor
Housing – Ballast housing is spun from .080" aluminum. Internal ballast support bracket
also functions as mounting reinforcement plate with a minimum thickness of .125".
Optical housing is spun from .080" aluminum, hemmed at the edges and internally
finished in high-gloss white paint for maximum reflectance.
Arms, Poles
and Bases
See pages 19 & 20
for suggested Arm,
Pole and Base
combinations.
Mounting – When pendant mounted, the fixture housing is connected to the mounting
arm by the Trulevel swivel which is internally welded to the housing and allows for fixture
leveling prior to locking the swivel. When side arm mounted, the housing is externally
welded to the mounting arm and the weld is blended to produce a smooth, continuous
joint.
Optics – Refer to page 62 for Optical System Specification.
Electrical Components – Refer to page 62 for Electrical Components Specification.
Finish – Electro-statically applied TGIC Polyester Powder Coat on substrate prepared with
20psi power wash at 140°F. Four step Iron phosphate pretreatment for protection and
paint adhesion. 400°F bake for maximum hardness and durability.
Spec/Order Example: DSAR25/175PSMH240/R-III/1/RAL9005
MODEL
LAMP/BALLAST MODE
WATTS
TYPE
VOLTS
STANDARD MAGNETIC BALLAST
DSAR25
250
175
3
150T
150
100
3
70T
70
2
48LED
PSMH
HPS
120
208
240
277
347 (CAN)
480
OPTICS
MOUNTING
FINISH
STANDARD
ARM MOUNT
STANDARD
TEXTURED FINISH
CP
CLEAR POLYCARBONATE
REFRACTOR
OPTIONAL
CA
CLEAR ACRYLIC REFRACTOR
DISTRIBUTION
1...............
BLACK
RAL-9005-T
2-180 . . . . . . . . .
WHITE
RAL-9003-T
3-120 . . . . . . . . .
GREY
RAL-7004-T
4-90 . . . . . . . . . .
DARK
BRONZE
RAL-8019-T
2
E (ELECTRONIC)
STANDARD MAGNETIC BALLAST
3
DSAR1
150T
150
100
3
70T
70
50
2
48LED
PSMH
HPS
120
208
240
277
347 (CAN)
480
2
DSDR1
E (ELECTRONIC)
TYPE I I I
R-III. . . . . . . . .
TYPE I V
(FORWARD THROW)
WALL MOUNT
WM . . . . . . . . . . . . .
GREEN
RAL-6005-T
FOR SMOOTH
FINISH REMOVE
SUFFIX “T”
(EXAMPLE:
RAL-9005)
3/8" IPS STEM MOUNT
AND SWIVEL CANOPY
(4'-0" MAX.) . . . . . . . . . . . . . . SM38
CHAIN MOUNTED
(4'-0" MAX.) . . . . . . . . . . . . . . CM
HOUSE SIDE SHIELD
90° . . . . . . HS 90°
135° . . . . . . HS 135°
180° . . . . . . HS 180°
PHOTO CELL + VLOTAGE
(EXAMPLE: PC120V) . . . . PC+V
SINGLE FUSE
(120V, 277V) . . . . . . . . SF
DOUBLE FUSE
(208V, 240V) . . . . . . . . DF
R-I V . . . . . . . . .
TYPE V
R-V - R N D . . . .
2 – 120 THRU 277 ONLY
3 – G12 BASE
CONSULT FACTORY FOR OTHER BALLAST
CONFIGURATIONS AND LAMP OPTIONS
www.usaltg.com
TYPE I I
R-II . . . . . . . . .
OPTIONS
CONSULT FACTORY
FOR CUSTOM COLORS
U.S.ARCHITECTURAL/SUN VALLEY LTG.
18
Suggested DSAR Combinations
For additional Contemporary
Shafts, Arms and specifications,
please
refer
to
the
U.S.
Architectural Lighting binder or
our website, www.usaltg.com.
28'
26'
24'
22'
20'
18'
16'
14'
12'
10'
8'
6'
4'
B33CL-CAP
BOLLARD
2'
19
Fixture
DSAR25
DSAR25
DSAR1
DSAR1-WM
Arm
XBB
XPS
XPJ-2
XWB
Pole
1070
RNTS 205-7
1060
-
Base
3300
-
400M
-
5" Dia. Fluted Alum.
U.S.ARCHITECTURAL/SUN VALLEY LTG.
5" Dia. Steel
4" Dia. Fluted Alum.
www.usaltg.com
Suggested DSDR Combinations
For additional Decorative Arms,
Shafts, Bases and specifications,
please refer to the Sun Valley
Lighting binder or our website,
www.usaltg.com.
28'
26'
24'
22'
20'
18'
16'
14'
12'
10'
8'
6'
4'
B21C-CAP
BOLLARD
2'
Fixture
DSDR1
DSDR1
DSDR1
DSDR1-WM
Arm
XWB
XPH
XPR-2
XBC
Pole
RTA 1964-188
1030C
1060
-
Base
4400SB
4300
2100
-
www.usaltg.com
6" to 4" Dia. Tapered Alum.
4.5" to 3.5" Dia. Cast, Fluted, Tapered Alum.
5" Dia. Fluted Alum.
U.S.ARCHITECTURAL/SUN VALLEY LTG.
20
DSCR
DSTR
Curved Sided Shade
Straight Sided Shade
Prismatic Refractor
Prismatic Refractor
DSTR25
DSCR25
250W Max.
EPA: 1.30
Max. Wt: 35lbs
250W Max.
EPA: 1.32
Max. Wt: 37lbs
21"
(533mm)
28"
(711mm)
25"
18"
(635mm)
(457mm)
18"
(457mm)
DSTR1
DSCR1
150W Max.
EPA: 0.97
Max. Wt: 20lbs
20"
(508mm)
150W Max.
EPA: 0.86
Max. Wt: 20lbs
18.5"
(470mm)
22"
(559mm)
14"
(356mm)
16.5"
(419mm)
20"
(508mm)
14"
(356mm)
SCALE: 3/8" = 1'-0"
21
U.S.ARCHITECTURAL/SUN VALLEY LTG.
www.usaltg.com
DSCR/DSTR
Fixture Specifications and Ordering
Ballast
Housing
Fixture
Spec/Order
from this
page.
Socket
Refractor
Lamp
by Others
Housing – Ballast housing is spun from .080" aluminum. Internal ballast support bracket
also functions as mounting reinforcement plate with a minimum thickness of .125".
Optical housing is spun from .080" aluminum, hemmed at the edges and internally
finished in high-gloss white paint for maximum reflectance.
Arms, Poles
and Bases
See pages 23 & 24
for suggested Arm,
Pole and Base
combinations.
Mounting – When pendant mounted, the fixture housing is connected to the mounting
arm by the Trulevel swivel which is internally welded to the housing and allows for fixture
leveling prior to locking the swivel. When side arm mounted, the housing is externally
welded to the mounting arm and the weld is blended to produce a smooth, continuous
joint.
Optics – Refer to page 62 for Optical System Specification.
Electrical Components – Refer to page 62 for Electrical Components Specification.
Finish – Electro-statically applied TGIC Polyester Powder Coat on substrate prepared with
20psi power wash at 140°F. Four step Iron phosphate pretreatment for protection and
paint adhesion. 400°F bake for maximum hardness and durability.
Spec/Order Example: DSCR1/175HPS120/WGD/1/RAL-8019
MODEL
LAMP/BALLAST MODE
WATTS
TYPE
VOLTS
STANDARD MAGNETIC BALLAST
DSCR25
DSTR25
250
175
3
150T
150
100
3
70T
70
2
48LED
PSMH
HPS
120
208
240
277
347 (CAN)
480
3
FINISH
STANDARD
ARM MOUNT
STANDARD
TEXTURED FINISH
CP
CLEAR POLYCARBONATE
REFRACTOR
OPTIONAL
CA
CLEAR ACRYLIC REFRACTOR
DISTRIBUTION
150T
150
100
3
70T
70
50
2
48LED
PSMH
HPS
120
208
240
277
347 (CAN)
480
2
E (ELECTRONIC)
DSTR1
CONSULT FACTORY FOR OTHER BALLAST
CONFIGURATIONS AND LAMP OPTIONS
www.usaltg.com
MOUNTING
1...............
BLACK
RAL-9005-T
2-180 . . . . . . . . .
WHITE
RAL-9003-T
3-120 . . . . . . . . .
GREY
RAL-7004-T
4-90 . . . . . . . . . .
2
E (ELECTRONIC)
STANDARD MAGNETIC BALLAST
DSCR1
OPTICS
TYPE I I
R-II . . . . . . . . .
TYPE I I I
R-III. . . . . . . . .
TYPE I V
(FORWARD THROW)
WALL MOUNT
WM . . . . . . . . . . . . .
DARK
BRONZE
RAL-8019-T
GREEN
RAL-6005-T
FOR SMOOTH
FINISH REMOVE
SUFFIX “T”
(EXAMPLE:
RAL-9005)
R-I V . . . . . . . . .
OPTIONS
3/8" IPS STEM MOUNT
AND SWIVEL CANOPY
(4'-0" MAX.) . . . . . . . . . . . . . . SM38
CHAIN MOUNTED
(4'-0" MAX.) . . . . . . . . . . . . . . CM
HOUSE SIDE SHIELD
90° . . . . . . HS 90°
135° . . . . . . HS 135°
180° . . . . . . HS 180°
PHOTO CELL + VLOTAGE
(EXAMPLE: PC120V) . . . . PC+V
SINGLE FUSE
(120V, 277V) . . . . . . . . SF
DOUBLE FUSE
(208V, 240V) . . . . . . . . DF
TYPE V
R-V - R N D . . . .
CONSULT FACTORY
FOR CUSTOM COLORS
U.S.ARCHITECTURAL/SUN VALLEY LTG.
22
Suggested DSCR Combinations
For additional Contemporary
Shafts, Arms and specifications,
please
refer
to
the
U.S.
Architectural Lighting binder or
our website, www.usaltg.com.
28'
26'
24'
22'
20'
18'
16'
14'
12'
RFH
10'
ROTATABLE
FLAG HOLDER
8'
6'
4'
2'
23
Fixture
DSCR1
DSCR25
DSCR25
DSCR1-WM
Arm
XPJ
XPE
XWA-2
XBB
Pole
RNTA 206-250
6" Dia. Alum.
5.25" to 3.5" Dia. Cast, Fluted, Tapered Alum.
1030C
1046T
-
Base
-
3100
1300
-
U.S.ARCHITECTURAL/SUN VALLEY LTG.
4" Dia. Fluted Alum.
www.usaltg.com
Suggested DSTR Combinations
For additional Decorative Arms,
Shafts, Bases and specifications,
please refer to the Sun Valley
Lighting binder or our website,
www.usaltg.com.
28'
26'
24'
22'
20'
18'
16'
14'
12'
FBA
FIXED
BANNER ARM
10'
(with Decorative Tails)
8'
6'
4'
2'
Fixture
DSTR1
DSTR25
DSTR25
DSTR1-WM
Arm
XWB
XWB-2
XPK
XPS
Pole
1080C
7" to 4" Dia. Cast, Octagonal, Tapered Alum.
5" Dia. Steel
RNTS 205-11
1040
-
Base
4500
-
2100
-
www.usaltg.com
4" Dia. Alum.
U.S.ARCHITECTURAL/SUN VALLEY LTG.
24
DSH
DSHR
Curved Sided Shade
Curved Sided Shade
Glass Diffuser
Prismatic Refractor
DSHR25
250W Max.
EPA: 125
Max. Wt: 37lbs
41"
(1041mm)
20"
(508mm)
30"
(762mm)
24"
(610mm)
DSHR1
DSH1
150W Max.
EPA: 0.93
Max. Wt: 20lbs
150W Max.
EPA: 0.77
Max. Wt: 22lbs
41"
41"
(1041mm)
16.5"
(1041mm)
17"
(419mm)
(432mm)
24"
(610mm)
24"
24"
(610mm)
(610mm)
24"
(610mm)
SCALE: 3/8" = 1'-0"
25
U.S.ARCHITECTURAL/SUN VALLEY LTG.
www.usaltg.com
DSH/DSHR
Fixture Specifications and Ordering
Ballast
Housing
Socket
Fixture
Order from
this page.
Lamp
by Others
Diffuser
Housing – Ballast housing is spun from .080” aluminum. Ballast support bracket also
functions as mounting reinforcement plate with a minimum thickness of .125". Optical
housing is spun from .080" aluminum, hemmed at the edges and internally finished in
high-gloss white paint for maximum reflectance.
Arms, Poles
and Bases
See pages 27 & 28
for suggested Arm,
Pole and Base
combinations.
Mounting – When pendant mounted, the fixture housing is connected to the mounting
arm by the Trulevel swivel which is internally welded to the housing and allows for fixture
leveling prior to locking the swivel. When side arm mounted, the housing is externally
welded to the mounting arm and the weld is blended to produce a smooth, continuous
joint.
Optics – Refer to page 62 for Optical System Specification.
Electrical Components – Refer to page 62 for Electrical Components Specification.
Finish – Electro-statically applied TGIC Polyester Powder Coat on substrate prepared with
20psi power wash at 140°F. Four step Iron phosphate pretreatment for protection and
paint adhesion. 400°F bake for maximum hardness and durability.
Spec/Order Example: DSHR25/150T PSMH347E/CP/1/RAL-6005
3
MODEL
LAMP/BALLAST MODE
WATTS
TYPE
VOLTS
STANDARD MAGNETIC BALLAST
3
DSH1
150T
150
100
3
70T
70
2
48LED
PSMH
HPS
120
208
240
277
347 (CAN)
480
2
E (ELECTRONIC)
DSHR25
PSMH
HPS
120
208
240
277
347 (CAN)
480
2
E (ELECTRONIC)
3
DSHR1
PSMH
HPS
120
208
240
277
347 (CAN)
480
2
E (ELECTRONIC)
1 – 50W ONLY
2 – 120 THRU 277 ONLY
3 – G12 BASE
CONSULT FACTORY FOR OTHER BALLAST
CONFIGURATIONS AND LAMP OPTIONS
www.usaltg.com
FINISH
STANDARD
ARM MOUNT
STANDARD
TEXTURED FINISH
CPG
CLEAR LINEAR
PRISMATIC
TEMPERED GLASS
OPTIONAL
WDG
OPAL GLASS DIFFUSER
1...............
BLACK
RAL-9005-T
2-180 . . . . . . . . .
WHITE
RAL-9003-T
3-120 . . . . . . . . .
GREY
RAL-7004-T
4-90 . . . . . . . . . .
DARK
BRONZE
RAL-8019-T
STANDARD
CP
CLEAR POLYCARBONATE
REFRACTOR
OPTIONAL
CA
CLEAR ACRYLIC REFRACTOR
DISTRIBUTION
STANDARD MAGNETIC BALLAST
150T
150
100
3
70T
70
50
2
48LED
MOUNTING
(ANNEALED AND HEAT RESISTANT)
STANDARD MAGNETIC BALLAST
250
175
3
150T
150
100
3
70T
70
2
48LED
OPTICS
TYPE I I
R-II . . . . . . . . .
WALL MOUNT
WM . . . . . . . . . . . . .
GREEN
RAL-6005-T
FOR SMOOTH
FINISH REMOVE
SUFFIX “T”
(EXAMPLE:
RAL-9005)
OPTIONS
3/8" IPS STEM MOUNT
AND SWIVEL CANOPY
(4'-0" MAX.) . . . . . . . . . . . . . . SM38
CHAIN MOUNTED
(4'-0" MAX.) . . . . . . . . . . . . . . CM
HOUSE SIDE SHIELD
90° . . . . . . HS 90°
135° . . . . . . HS 135°
180° . . . . . . HS 180°
PHOTO CELL + VLOTAGE
(EXAMPLE: PC120V) . . . . PC+V
SINGLE FUSE
(120V, 277V) . . . . . . . . SF
DOUBLE FUSE
(208V, 240V) . . . . . . . . DF
TYPE I I I
R-III. . . . . . . . .
TYPE I V
(FORWARD THROW)
R-I V . . . . . . . . .
TYPE V
R-V - R N D . . . .
CONSULT FACTORY
FOR CUSTOM COLORS
U.S.ARCHITECTURAL/SUN VALLEY LTG.
26
Suggested DSH Combinations
For additional Contemporary
Shafts, Arms and specifications,
please
refer
to
the
U.S.
Architectural Lighting binder or
our website, www.usaltg.com.
28'
26'
24'
22'
20'
18'
16'
14'
12'
10'
8'
6'
4'
B3C-CAP
BOLLARD
2'
Fixture
DSH1
DSH1
DSH1
DSH1-WM
Arm
XPG
XBC-2
XPJ
XWA
1040
TFS 2064
Pole
Base
27
4" Dia. Alum.
300
U.S.ARCHITECTURAL/SUN VALLEY LTG.
6" to 4" Dia. Fluted, Tapered Steel
1046T
-
6" to 4" Dia. Tapered Alum.
4200SB
1400
-
www.usaltg.com
Suggested DSHR Combinations
For additional Decorative Arms,
Shafts, Bases and specifications,
please refer to the Sun Valley
Lighting binder or our website,
www.usaltg.com.
28'
26'
24'
22'
20'
18'
16'
14'
BBA
BREAK AWAY
BANNER ARM
12'
10'
8'
6'
4'
B24C-CAP
BOLLARD
2'
Fixture
DSHR25
DSHR25
DSHR1
DSHR1
Arm
XPK
XPE
XWA-2
XPE
RNTA 154-188
1058C
RNTS 255-11
-
2400SB
4400
-
-
Pole
Base
4" Dia. Alum.
www.usaltg.com
7" to 4" Dia. Cast, Fluted, Tapered Alum.
5" Dia. Steel
U.S.ARCHITECTURAL/SUN VALLEY LTG.
28
DSARB
DSCRB
Straight Sided Shade
Curved Sided Shade
Prismatic Refractors
Prismatic Refractor
DSARB25
DSCRB25
250W Max.
EPA: 1.39
Max. Wt: 35lbs
41"
250W Max.
EPA: 1.28
Max. Wt: 39lbs
41"
(1041mm)
(1041mm)
21"
22"
(533mm)
(559mm)
25"
(635mm)
28"
24"
(711mm)
(610mm)
DSARB1
24"
(610mm)
DSCRB1
150W Max.
EPA: 1.00
Max. Wt: 23lbs
150W Max.
EPA: 0.95
Max. Wt: 24lbs
41"
41"
(1041mm)
(1041mm)
18.5"
19"
(470mm)
(483mm)
20"
(508mm)
22"
24"
(559mm)
(610mm)
24"
(610mm)
SCALE: 3/8" = 1'-0"
29
U.S.ARCHITECTURAL/SUN VALLEY LTG.
www.usaltg.com
DSARB/DSCRB
Fixture Specifications and Ordering
Ballast
Fixture
Spec/Order
from this
page.
Housing
Socket
Lamp
by Others
Refractor
Housing – Ballast housing is spun from .080" aluminum. Internal ballast support bracket
also functions as mounting reinforcement plate with a minimum thickness of .125".
Optical housing is spun from .080" aluminum, hemmed at the edges and internally
finished in high-gloss white paint for maximum reflectance. Horizontal louvers (decorative
bands – non-illuminated) are made of heavy gauge aluminum sheet and welded to the
ballast housing.
Arms, Poles
and Bases
See pages 31 & 32
for suggested Arm,
Pole and Base
combinations.
Mounting – When pendant mounted, the fixture housing is connected to the mounting
arm bythe Trulevel swivel which is internally welded to the housing and allows for fixture
leveling prior to locking the swivel. When side arm mounted, the housing is externally
welded to the mounting arm and the weld is blended to produce a smooth, continuous
joint.
Optics – Refer to page 62 for Optical System Specification.
Electrical Components – Refer to page 62 for Electrical Components Specification.
Finish – Electro-statically applied TGIC Polyester Powder Coat on substrate prepared with
20psi power wash at 140°F. Four step Iron phosphate pretreatment for protection and
paint adhesion. 400°F bake for maximum hardness and durability.
Spec/Order Example: DSCRB25/150TPSMH240E/R-III/1/RAL7004-T
MODEL
LAMP/BALLAST MODE
WATTS
TYPE
VOLTS
STANDARD MAGNETIC BALLAST
DSARB25
DSCRB25
250
175
3
150T
150
100
3
70T
70
2
48LED
PSMH
HPS
120
208
240
277
347 (CAN)
480
E (ELECTRONIC)
STANDARD MAGNETIC BALLAST
3
DSARB1
PSMH
HPS
120
208
240
277
347 (CAN)
480
2
E (ELECTRONIC)
DSCRB1
FINISH
STANDARD
ARM MOUNT
STANDARD
TEXTURED FINISH
CP
CLEAR POLYCARBONATE
REFRACTOR
OPTIONAL
CA
CLEAR ACRYLIC REFRACTOR
TYPE I I
R-II . . . . . . . . .
TYPE I I I
R-III. . . . . . . . .
TYPE I V
(FORWARD THROW)
1...............
BLACK
RAL-9005-T
2-180 . . . . . . . . .
WHITE
RAL-9003-T
3-120 . . . . . . . . .
GREY
RAL-7004-T
4-90 . . . . . . . . . .
WALL MOUNT
WM . . . . . . . . . . . . .
DARK
BRONZE
RAL-8019-T
GREEN
RAL-6005-T
FOR SMOOTH
FINISH REMOVE
SUFFIX “T”
(EXAMPLE:
RAL-9005)
R-I V . . . . . . . . .
OPTIONS
3/8" IPS STEM MOUNT
AND SWIVEL CANOPY
(4'-0" MAX.) . . . . . . . . . . . . . . SM38
CHAIN MOUNTED
(4'-0" MAX.) . . . . . . . . . . . . . . CM
HOUSE SIDE SHIELD
90° . . . . . . HS 90°
135° . . . . . . HS 135°
180° . . . . . . HS 180°
PHOTO CELL + VLOTAGE
(EXAMPLE: PC120V) . . . . PC+V
SINGLE FUSE
(120V, 277V) . . . . . . . . SF
DOUBLE FUSE
(208V, 240V) . . . . . . . . DF
TYPE V
R-V - R N D . . . .
2 – 120 THRU 277 ONLY
3 – G12 BASE
CONSULT FACTORY FOR OTHER BALLAST
CONFIGURATIONS AND LAMP OPTIONS
www.usaltg.com
MOUNTING
DISTRIBUTION
2
150T
150
100
3
70T
70
50
2
48LED
OPTICS
CONSULT FACTORY
FOR CUSTOM COLORS
U.S.ARCHITECTURAL/SUN VALLEY LTG.
30
Suggested DSARB Combinations
For additional Contemporary
Shafts, Arms and specifications,
please
refer
to
the
U.S.
Architectural Lighting binder or
our website, www.usaltg.com.
28'
26'
24'
22'
20'
18'
16'
14'
12'
RSS1
ROTATABLE
STREET SIGN
10'
8'
6'
4'
2'
31
Fixture
DSARB25
DSARB1
DSARB25
DSARB1-WM
Arm
XPG
XPR-2
XPE
XBC
Pole
1070
5" Dia. Fluted Alum.
5" Dia. Fluted Alum.
7" to 4" Dia. Tapered, Fluted Steel
TSF 2274
-
Base
8500
1200
3600SB
-
U.S.ARCHITECTURAL/SUN VALLEY LTG.
1070
www.usaltg.com
Suggested DSCRB Combinations
For additional Decorative Arms,
Shafts, Bases and specifications,
please refer to the Sun Valley
Lighting binder or our website,
www.usaltg.com.
28'
26'
24'
22'
20'
18'
16'
14'
12'
10'
8'
6'
4'
B35EL-CAP
BOLLARD
2'
Fixture
DSCRB1
DSCRB25
DSCRB1
DSCRB1-WM
Arm
XPC
XPE-2
XPR
XWA
Pole
1060
4" Dia. Fluted Alum.
6" to 3" Dia. Tapered Alum.
RTS 20-11
TFS 1964
-
Base
3200
-
3600SB
-
www.usaltg.com
6" to 4" Dia. Fluted, Tapered Alum.
U.S.ARCHITECTURAL/SUN VALLEY LTG.
32
DSAP
DSDP
Straight Sided Shade
Curved Sided Shade
DSDP25
DSAP25
400W Max.
EPA: 1.23
Max. Wt: 42lbs
400W Max.
EPA: 1.52
Max. Wt: 48lbs
18.5"
(470mm)
25"
(635mm)
21"
(533mm)
18"
(457mm)
25"
(635mm)
DSAP1
150W Max.
EPA: 0.77
Max. Wt: 26lbs
18"
(457mm)
DSDP1
150W Max.
EPA: 1.10
Max. Wt: 28lbs
14"
(356mm)
20"
(508mm)
17.5"
(445mm)
14"
(356mm)
21.5"
(546mm)
14"
(356mm)
SCALE: 3/8" = 1'-0"
33
U.S.ARCHITECTURAL/SUN VALLEY LTG.
www.usaltg.com
DSAP/DSDP
Fixture Specifications and Ordering
Ballast
Housing
Socket
Lamp
by Others
Fixture
Spec/Order
from this
page.
Glass
Lens
Housing – (For up to 175W) – Ballast housing is spun from .080" aluminum. Internal ballast
support bracket also functions as mounting reinforcement plate and has a minimum
thickness of .125". (For 250W & above) – Ballast housing is cast from low copper (A356, <
0.2%) aluminum alloy, minimum .125" wall thickness. Optical housing is spun from .080"
aluminum, hemmed at the edges. Lens frame is a one-piece .060" aluminum spinning
surrounding a 3/16" tempered glass lens sealed with a continuous silicone gasket and
attaches to the housing with the AccuhingeTM hinging mechanism. A captive stainless steel
thumbscrew allows for tool less entry to the optical compartment which is sealed with a
closed cell E.P.D.M. gasket.
Arms, Poles
and Bases
See pages 35 & 36
for suggested Arm,
Pole and Base
combinations.
Mounting – When pendant mounted, the fixture housing is connected to the mounting arm
by the Trulevel swivel which is internally welded to the housing and allows for fixture leveling
prior to locking the swivel. When side arm mounted, the housing is externally welded to the
mounting arm and the weld is blended to produce a smooth, continuous joint.
Optics – Refer to page 62 for Optical System Specification.
Electrical Components – Refer to page 62 for Electrical Components Specification.
Finish – Electro-statically applied TGIC Polyester Powder Coat on substrate prepared with
20psi power wash at 140°F. All castings are shot blasted to provide a uniform surface prior to
power wash and paint. A four step iron phosphate pretreatment for protection and paint
adhesion is utilized. 400°F bake for maximum hardness and durability.
Spec/Order Example: DSDP25/250PSMH277/HR-III/1/RAL6005-T/PC277
MODEL
LAMP/BALLAST MODE
WATTS
TYPE
VOLTS
STANDARD MAGNETIC BALLAST
DSAP25
DSDP25
400
PSMH
350
HPS
320
5
315
250
4
175
3
150T
150
100
2
64 LED
2
80 LED
2
120 LED
120
208
240
277
347 (CAN)
480
OPTICS
HORIZONTAL SEGMENTED
REFLECTORS
2-180 . . . . . . . . .
TYPE I V
HR-I V . . . . . . . .
WHITE
RAL-9003-T
3-120 . . . . . . . . .
GREY
RAL-7004-T
4-90 . . . . . . . . . .
DARK
BRONZE
RAL-8019-T
OPAL CONVEX LENS -
GREEN
RAL-6005-T
3/4" IPS STEM MOUNT
AND SWIVEL CANOPY
(4'-0" MAX.) . . . . . . . . . . . . . . SM
HR-FT-HSC. . .
TYPE V SQUARE
HR-V-SQ. . . . .
DSDP1
WALL MOUNT
WM . . . . . . . . . . . . .
E (ELECTRONIC)
DSAP1
STANDARD
TEXTURED FINISH
TYPE I I I
HR-III. . . . . . . .
(HOUSE SIDE CUT-OFF)
120
208
240
277
347 (CAN)
480
OPTIONS
BLACK
RAL-9005-T
FORWARD THROW
STANDARD MAGNETIC BALLAST
3
ARM MOUNT
FINISH
1...............
TYPE I I
HR-II . . . . . . . .
2
150T
PSMH
150
HPS
100
3
70T
70
50
2
64 LED
2
80 LED
MOUNTING
VERTICAL SEGMENTED
REFLECTORS
ASYMMETRIC
VR-ASY. . .
FOR SMOOTH
FINISH REMOVE
SUFFIX “T”
(EXAMPLE:
RAL-9005)
CONVEX GLASS LENS. . . DG
CLEAR CONVEX LENS ACRYLIC ( 175W MAX.) . . . . . . CA
CLEAR CONVEX LENS -
POLYCARBONATE ( 175W MAX.) . . CP
OPAL CONVEX LENS ACRYLIC ( 175W MAX.) . . . . . . WA
POLYCARBONATE ( 175W MAX.) . . WP
CHAIN MOUNTED
(4'-0" MAX.) . . . . . . . . . . . . . . CM
HOUSE SIDE SHIELD . . . . . HS
PHOTO CELL + VLOTAGE
(EXAMPLE: PC120V) . . . . PC+V
SYMMETRIC
VR-V-SQ. . . .
SINGLE FUSE
(120V, 277V) . . . . . . . . . SF
DOUBLE FUSE
(208V, 240V) . . . . . . . . . DF
2
E (ELECTRONIC)
2 – 120 THRU 277 ONLY
3 – G12 BASE
4 – POSITION SENSITIVE LAMP
CONSULT FACTORY FOR OTHER BALLAST
CONFIGURATIONS AND LAMP OPTIONS
www.usaltg.com
CONSULT FACTORY
FOR CUSTOM COLORS
U.S.ARCHITECTURAL/SUN VALLEY LTG.
34
Suggested DSAP Combinations
For additional Contemporary
Shafts, Arms and specifications,
please
refer
to
the
U.S.
Architectural Lighting binder or
our website, www.usaltg.com.
28'
26'
24'
22'
20'
18'
16'
14'
12'
10'
8'
6'
4'
2'
Fixture
DSAP25
DSAP1
DSAP1/WP
DSAP1-WM
Arm
XWB
XPJ
XWB
XPK
RNTS 205-7
1070
1030T
-
-
2600
1200
-
Pole
Base
35
5" Dia. Steel
U.S.ARCHITECTURAL/SUN VALLEY LTG.
5" Dia. Fluted Alum.
4" to 3" Dia. Tapered Alum.
www.usaltg.com
Suggested DSDP Combinations
For additional Decorative Arms,
Shafts, Bases and specifications,
please refer to the Sun Valley
Lighting binder or our website,
www.usaltg.com.
28'
26'
24'
22'
20'
18'
16'
14'
ROTATABLE
LADDER REST
12'
10'
8'
6'
4'
B3C-BAL
BOLLARD
2'
RBC
ROUND
BASE COVER
Fixture
DSDP1
DSDP25
DSDP1
DSDP1-WM
Arm
XPR
XPD-2
XPJ
XBB
Pole
1050
5" Dia. Alum.
6" to 4" Dia. Tapered Alum.
RTA 2064-188
1060
-
Base
700
-
300
-
www.usaltg.com
4" Dia. Fluted Alum.
U.S.ARCHITECTURAL/SUN VALLEY LTG.
36
DSCP
DSTP
Curved Sided Shade
Straight Sided Shade
DSTP25
DSCP25
250W Max.
EPA: 1.10
Max. Wt: 48lbs
250W Max.
EPA: 1.17
Max. Wt: 28lbs
17"
(432mm)
28"
(711mm)
17"
(432mm)
18"
(457mm)
25"
(635mm)
DSCP1
150W Max.
EPA: 0.63
Max. Wt: 29lbs
18"
(457mm)
DSTP1
150W Max.
EPA: 0.70
Max. Wt: 23lbs
13"
(330mm)
22"
(559mm)
13"
(330mm)
14"
(356mm)
20"
(508mm)
14"
(356mm)
SCALE: 3/8" = 1'-0"
37
U.S.ARCHITECTURAL/SUN VALLEY LTG.
www.usaltg.com
DSCP/DSTP
Fixture Specifications and Ordering
Housing
Ballast
Fixture
Spec/Order
from this
page.
Socket
Lamp
by Others
Glass
Lens
Housing – (For up to 175W) – Ballast housing is spun from .080" aluminum. Internal ballast
support bracket also functions as mounting reinforcement plate and has a minimum
thickness of .125". (For 250W & above) – Ballast housing is cast from low copper (A356, <
0.2%) aluminum alloy, minimum .125" wall thickness. Optical housing is spun from .080"
aluminum, hemmed at the edges. Lens frame is a one-piece .060" aluminum spinning
surrounding a 3/16" tempered glass lens sealed with a continuous silicone gasket and
attaches to the housing with the AccuhingeTM hinging mechanism. A captive stainless
steel thumbscrew allows for tool less entry to the optical compartment which is sealed
with a closed cell E.P.D.M. gasket.
Arms, Poles
and Bases
See pages 39 & 40
for suggested Arm,
Pole and Base
combinations.
Mounting – When pendant mounted, the fixture housing is connected to the mounting
arm by the Trulevel swivel which is internally welded to the housing and allows for fixture
leveling prior to locking the swivel. When side arm mounted, the housing is externally
welded to the mounting arm and the weld is blended to produce a smooth, continuous
joint.
Optics – Refer to page 62 for Optical System Specification.
Electrical Components – Refer to page 62 for Electrical Components Specification.
Finish – Electro-statically applied TGIC Polyester Powder Coat on substrate prepared with
20psi power wash at 140°F. All castings are shot blasted to provide a uniform surface prior
to power wash and paint. A four step iron phosphate pretreatment for protection and
paint adhesion is utilized. 400°F bake for maximum hardness and durability.
Spec/Order Example: DSTP1/150TPSMH277E/HR-III/1/RAL6005
MODEL
LAMP/BALLAST MODE
WATTS
TYPE
VOLTS
STANDARD MAGNETIC BALLAST
4
DSCP25
DSTP25
250
PSMH
4
175
HPS
3
150T
150
100
2
64LED
2
80LED
2
120LED
120
208
240
277
347 (CAN)
480
DSCP1
DSTP1
120
208
240
277
347 (CAN)
480
2
E (ELECTRONIC)
OPTIONS
STANDARD
TEXTURED FINISH
BLACK
RAL-9005-T
TYPE I I I
HR-III. . . . . . . .
2-180 . . . . . . . . .
CLEAR CONVEX LENS -
TYPE I V
HR-I V . . . . . . . .
WHITE
RAL-9003-T
3-120 . . . . . . . . .
GREY
RAL-7004-T
OPAL CONVEX LENS ACRYLIC ( 175W MAX.) . . . . . . WA
4-90 . . . . . . . . . .
DARK
BRONZE
RAL-8019-T
TYPE V SQUARE
HR-V-SQ. . . . .
WALL MOUNT
WM . . . . . . . . . . . . .
VERTICAL SEGMENTED
REFLECTORS
ASYMMETRIC
VR-ASY. . .
CLEAR CONVEX LENS ACRYLIC ( 175W MAX.) . . . . . . CA
POLYCARBONATE ( 175W MAX.) . . CP
OPAL CONVEX LENS -
POLYCARBONATE ( 175W MAX.) . . WP
3/4" IPS STEM MOUNT
AND SWIVEL CANOPY
(4'-0" MAX.) . . . . . . . . . . . . . . SM
GREEN
RAL-6005-T
CHAIN MOUNTED
(4'-0" MAX.) . . . . . . . . . . . . . . CM
FOR SMOOTH
FINISH REMOVE
SUFFIX “T”
(EXAMPLE:
RAL-9005)
HOUSE SIDE SHIELD . . . . . HS
PHOTO CELL + VLOTAGE
(EXAMPLE: PC120V) . . . . PC+V
SYMMETRIC
VR-V-SQ. . . .
SINGLE FUSE
(120V, 277V) . . . . . . . . . SF
2 – 120 THRU 277 ONLY
3 – G12 BASE
4 – POSITION SENSITIVE LAMP
CONSULT FACTORY FOR OTHER BALLAST
CONFIGURATIONS AND LAMP OPTIONS
www.usaltg.com
CONVEX GLASS LENS. . . DG
1...............
HR-FT-HSC. . .
STANDARD MAGNETIC BALLAST
PSMH
HPS
ARM MOUNT
FINISH
TYPE I I
HR-II . . . . . . . .
(HOUSE SIDE CUT-OFF)
E (ELECTRONIC)
150T
150
100
3
70T
70
50
2
64LED
2
80LED
HORIZONTAL SEGMENTED
REFLECTORS
MOUNTING
FORWARD THROW
2
3
OPTICS
DOUBLE FUSE
(208V, 240V) . . . . . . . . . DF
CONSULT FACTORY
FOR CUSTOM COLORS
U.S.ARCHITECTURAL/SUN VALLEY LTG.
38
Suggested DSCP Combinations
For additional Contemporary
Shafts, Arms and specifications,
please
refer
to
the
U.S.
Architectural Lighting binder or
our website, www.usaltg.com.
28'
26'
24'
22'
20'
18'
16'
14'
12'
RSS3
ROTATABLE
STREET SIGN
10'
8'
6'
4'
2'
39
Fixture
DSCP25
DSCP1
DSCP1/WP
DSCP1-WM
Arm
XPE
XBC-2
XPH
XPC
Pole
1070
5" Dia. Fluted Alum.
5" Dia. Alum.
RNTA 205-188
1058C
-
Base
8500
-
4000
-
U.S.ARCHITECTURAL/SUN VALLEY LTG.
5.5" to 4" Dia. Cast, Fluted, Tapered Alum.
www.usaltg.com
Suggested DSTP Combinations
For additional Decorative Arms,
Shafts, Bases and specifications,
please refer to the Sun Valley
Lighting binder or our website,
www.usaltg.com.
28'
26'
24'
22'
20'
18'
CM
CHAIN MOUNT
16'
14'
12'
10'
8'
6'
4'
B11C-CAP
BOLLARD
2'
Fixture
DSTP25
DSTP1
DSTP25
DSTP1-WM
Arm
-
XPK-2
XPS
XWB
Pole
-
1070
1035T
-
4500SB
1400
-
Base
www.usaltg.com
-
5" Dia. Fluted Alum.
5" to 3" Dia. Tapered Alum.
U.S.ARCHITECTURAL/SUN VALLEY LTG.
40
DSAPL
DSDPL
Prismatic or Opal Glass
Prismatic or Opal Glass
Straight Sided Shade
Curved Sided Shade
DSAPL25
DSDPL25
400W Max.
EPA: 1.51
Max. Wt: 48lbs
41"
400W Max.
EPA: 1.80
Max. Wt: 50lbs
41"
(1041mm)
(1041mm)
24"
26.5"
(610mm)
(674mm)
25"
(635mm)
24"
25"
(610mm)
(635mm)
24"
(610mm)
DSDPL1
DSAPL1
150W Max.
EPA: 1.19
Max. Wt: 30lbs
150W Max.
EPA: 0.86
Max. Wt: 27lbs
41"
41"
(1041mm)
(1041mm)
16.5"
20"
(419mm)
(508mm)
20"
(508mm)
24"
21.5"
(610mm)
(546mm)
24"
(610mm)
SCALE: 3/8" = 1'-0"
41
U.S.ARCHITECTURAL/SUN VALLEY LTG.
www.usaltg.com
DSAPL/DSDPL
Fixture Specifications and Ordering
Housing
Ballast
Diffuser
Socket
Lamp
by Others
Fixture
Spec/Order
from this
page.
Glass
Lens
Housing – Ballast housing is cast from low copper (A356, < 0.2%) aluminum alloy,
minimum .125" wall thickness. Windows in the lower portion of the ballast housing allow
for decorative illumination (horizontal optics only) .Optical housing is spun from .080"
aluminum, hemmed at the edges. Lens frame is a one-piece .060" aluminum spinning
surrounding a 3/16" tempered glass lens sealed with a continuous silicone gasket and
attaches to the housing with the AccuhingeTM hinging mechanism. A captive stainless
steel thumbscrew allows for tool less entry to the optical compartment which is sealed
with a closed cell E.P.D.M. gasket.
Arms, Poles
and Bases
See pages 43 & 44
for suggested Arm,
Pole and Base
combinations.
Mounting – When pendant mounted, the fixture housing is connected to the mounting
arm by the Trulevel swivel which is internally welded to the housing and allows for fixture
leveling prior to locking the swivel. When side arm mounted, the housing is externally
welded to the mounting arm and the weld is blended to produce a smooth, continuous
joint.
Optics – Refer to page 62 for Optical System Specification.
Electrical Components – Refer to page 62 for Electrical Components Specification.
Finish – Electro-statically applied TGIC Polyester Powder Coat on substrate prepared with
20psi power wash at 140°F. All castings are shot blasted to provide a uniform surface prior
to power wash and paint. A four step iron phosphate pretreatment for protection and
paint adhesion is utilized. 400°F bake for maximum hardness and durability.
Spec/Order Example: DSAPL25/250PSMH277/HR-V-SQ/1/RAL9003-T
MODEL
LAMP/BALLAST MODE
WATTS
TYPE
VOLTS
STANDARD MAGNETIC BALLAST
DSAPL25
DSDPL25
400
350
320
5
315
250
4
175
3
150T
150
100
PSMH
HPS
120
208
240
277
347 (CAN)
480
OPTICS
HORIZONTAL SEGMENTED
REFLECTORS
TYPE I I
HR-II . . . . . . . .
TYPE I I I
HR-III. . . . . . . .
TYPE I V
HR-I V . . . . . . . .
MOUNTING
FINISH
ARM MOUNT
STANDARD
TEXTURED FINISH
1...............
BLACK
RAL-9005-T
2-180 . . . . . . . . .
WHITE
RAL-9003-T
3-120 . . . . . . . . .
GREY
RAL-7004-T
4-90 . . . . . . . . . .
DARK
BRONZE
RAL-8019-T
2
E (ELECTRONIC)
FORWARD THROW
STANDARD MAGNETIC BALLAST
DSAPL1
150T
150
100
3
70T
70
50
3
PSMH
HPS
120
208
240
277
347 (CAN)
480
(HOUSE SIDE CUT-OFF)
HR-FT-HSC. . .
TYPE V SQUARE
HR-V-SQ. . . . .
WALL MOUNT
WM . . . . . . . . . . . . .
GREEN
RAL-6005-T
FOR SMOOTH
FINISH REMOVE
SUFFIX “T”
(EXAMPLE:
RAL-9005)
CLEAR CONVEX LENS ACRYLIC ( 175W MAX.) . . . . . . CA
CLEAR CONVEX LENS -
POLYCARBONATE ( 175W MAX.) . . CP
OPAL CONVEX LENS ACRYLIC ( 175W MAX.) . . . . . . WA
OPAL CONVEX LENS -
POLYCARBONATE ( 175W MAX.) . . WP
3/4" IPS STEM MOUNT
AND SWIVEL CANOPY
(4'-0" MAX.) . . . . . . . . . . . . . . SM
CHAIN MOUNTED
(4'-0" MAX.) . . . . . . . . . . . . . . CM
HOUSE SIDE SHIELD . . . . . HS
PHOTO CELL + VLOTAGE
(EXAMPLE: PC120V) . . . . PC+V
SINGLE FUSE
(120V, 277V) . . . . . . . . . SF
2 – 120 THRU 277 ONLY
3 – G12 BASE
4 – POSITION SENSITIVE LAMP
DOUBLE FUSE
(208V, 240V) . . . . . . . . . DF
CONSULT FACTORY FOR OTHER BALLAST
CONFIGURATIONS AND LAMP OPTIONS
www.usaltg.com
CONVEX GLASS LENS. . . DG
E (ELECTRONIC)
2
DSDPL1
OPTIONS
CONSULT FACTORY
FOR CUSTOM COLORS
U.S.ARCHITECTURAL/SUN VALLEY LTG.
42
Suggested DSAPL Combinations
For additional Contemporary
Shafts, Arms and specifications,
please
refer
to
the
U.S.
Architectural Lighting binder or
our website, www.usaltg.com.
28'
26'
24'
22'
20'
18'
16'
14'
12'
10'
8'
6'
4'
B4C-BAL
BOLLARD
2'
43
Fixture
DSAPL1
DSAPL25
DSAPL1/CA
DSAPL1-WM
Arm
XPE
XPC
XBB-2
XWB
Pole
1030C
5.25" to 3.5" Dia. Cast, Fluted, Tapered Alum.
5" Dia. Steel
RNTS 205-7
1050
-
Base
4000
-
300
-
U.S.ARCHITECTURAL/SUN VALLEY LTG.
5" Dia. Alum.
www.usaltg.com
Suggested DSDPL Combinations
For additional Decorative Arms,
Shafts, Bases and specifications,
please refer to the Sun Valley
Lighting binder or our website,
www.usaltg.com.
28'
26'
24'
22'
20'
18'
16'
14'
12'
10'
8'
6'
4'
2'
Fixture
DSDPL25
DSDPL25
DSDPL1
DSDPL1-WM
Arm
XPG
XBC-2
XPH
XPD
Pole
1030C
RTS 20-11
6" to 3" Dia. Tapered Steel
4" Dia. Fluted Alum.
1060
-
Base
3600
-
4300
-
5.25" to 3.5" Dia. Cast, Fluted, Tapered Alum.
www.usaltg.com
U.S.ARCHITECTURAL/SUN VALLEY LTG.
44
DSCPL
DSTPL
Prismatic or Opal Glass
Prismatic or Opal Glass
Curved Sided Shade
Straight Sided Shade
DSCPL25
DSTPL25
250W Max.
EPA: 1.39
Max. Wt: 50lbs
250W Max.
EPA: 1.23
Max. Wt: 46lbs
41"
41"
(1041mm)
(1041mm)
18.75"
22.5"
(476mm)
(572mm)
28"
(711mm)
24"
25"
(610mm)
(635mm)
DSCPL1
24"
(610mm)
DSTPL1
150W Max.
EPA: 0.72
Max. Wt: 30lbs
150W Max.
EPA: .83
Max. Wt: 25lbs
41"
41"
(1041mm)
15"
(1041mm)
16"
(381mm)
(406mm)
22"
(559mm)
20"
24"
(508mm)
(610mm)
24"
(610mm)
SCALE: 3/8" = 1'-0"
45
U.S.ARCHITECTURAL/SUN VALLEY LTG.
www.usaltg.com
DSCPL/DSTPL
Fixture Specifications and Ordering
Housing
Ballast
Diffuser
Fixture
Spec/Order
from this
page.
Socket
Lamp
by Others
Glass
Lens
Housing – Ballast housing is cast from low copper (A356, < 0.2%) aluminum alloy,
minimum .125" wall thickness. Windows in the lower portion of the ballast housing allow
for decorative illumination (horizontal optics only) .Optical housing is spun from .080"
aluminum, hemmed at the edges. Lens frame is a one-piece .060" aluminum spinning
surrounding a 3/16" tempered glass lens sealed with a continuous silicone gasket and
attaches to the housing with the AccuhingeTM hinging mechanism. A captive stainless
steel thumbscrew allows for tool less entry to the optical compartment which is sealed
with a closed cell E.P.D.M. gasket.
Arms, Poles
and Bases
See pages 47 & 48
for suggested Arm,
Pole and Base
combinations.
Mounting – When pendant mounted, the fixture housing is connected to the mounting
arm by the Trulevel swivel which is internally welded to the housing and allows for fixture
leveling prior to locking the swivel. When side arm mounted, the housing is externally
welded to the mounting arm and the weld is blended to produce a smooth, continuous
joint.
Optics – Refer to page 62 for Optical System Specification.
Electrical Components – Refer to page 62 for Electrical Components Specification.
Finish – Electro-statically applied TGIC Polyester Powder Coat on substrate prepared with
20psi power wash at 140°F. All castings are shot blasted to provide a uniform surface prior
to power wash and paint. A four step iron phosphate pretreatment for protection and
paint adhesion is utilized. 400°F bake for maximum hardness and durability.
Spec/Order Example: DSCPL1/150PSMH277/HR-V-SQ/1/RAL9005-T
MODEL
LAMP/BALLAST MODE
WATTS
TYPE
VOLTS
STANDARD MAGNETIC BALLAST
4
DSCPL25
DSTPL25
250
4
175
3
150T
150
100
PSMH
HPS
120
208
240
277
347 (CAN)
480
OPTICS
MOUNTING
FINISH
HORIZONTAL SEGMENTED
REFLECTORS
ARM MOUNT
STANDARD
TEXTURED FINISH
TYPE I I
HR-II . . . . . . . .
TYPE I I I
HR-III. . . . . . . .
TYPE I V
HR-I V . . . . . . . .
2
E (ELECTRONIC)
1...............
BLACK
RAL-9005-T
2-180 . . . . . . . . .
WHITE
RAL-9003-T
3-120 . . . . . . . . .
GREY
RAL-7004-T
4-90 . . . . . . . . . .
DARK
BRONZE
RAL-8019-T
STANDARD MAGNETIC BALLAST
DSCPL1
150T
150
100
3
70T
70
50
3
PSMH
HPS
120
208
240
277
347 (CAN)
480
2
E (ELECTRONIC)
DSTPL1
(HOUSE SIDE CUT-OFF)
HR-FT-HSC. . .
TYPE V SQUARE
HR-V-SQ. . . . .
WALL MOUNT
WM . . . . . . . . . . . . .
GREEN
RAL-6005-T
FOR SMOOTH
FINISH REMOVE
SUFFIX “T”
(EXAMPLE:
RAL-9005)
2 – 120 THRU 277 ONLY
3 – G12 BASE
4 – POSITION SENSITIVE LAMP
CONSULT FACTORY FOR OTHER BALLAST
CONFIGURATIONS AND LAMP OPTIONS
www.usaltg.com
FORWARD THROW
OPTIONS
CONVEX GLASS LENS. . . DG
CLEAR CONVEX LENS ACRYLIC ( 175W MAX.) . . . . . . CA
CLEAR CONVEX LENS -
POLYCARBONATE ( 175W MAX.) . . CP
OPAL CONVEX LENS ACRYLIC ( 175W MAX.) . . . . . . WA
OPAL CONVEX LENS -
POLYCARBONATE ( 175W MAX.) . . WP
3/4" IPS STEM MOUNT
AND SWIVEL CANOPY
(4'-0" MAX.) . . . . . . . . . . . . . . SM
CHAIN MOUNTED
(4'-0" MAX.) . . . . . . . . . . . . . . CM
HOUSE SIDE SHIELD . . . . . HS
PHOTO CELL + VLOTAGE
(EXAMPLE: PC120V) . . . . PC+V
SINGLE FUSE
(120V, 277V) . . . . . . . . . SF
DOUBLE FUSE
(208V, 240V) . . . . . . . . . DF
CONSULT FACTORY
FOR CUSTOM COLORS
U.S.ARCHITECTURAL/SUN VALLEY LTG.
46
Suggested DSCPL Combinations
For additional Contemporary
Shafts, Arms and specifications,
please
refer
to
the
U.S.
Architectural Lighting binder or
our website, www.usaltg.com.
28'
26'
24'
22'
20'
18'
16'
14'
12'
10'
8'
6'
4'
B4C-CAP
BOLLARD
2'
47
Fixture
DSCPL1/CP
DSCPL1
DSCPL25
DSCPL1-WM
Arm
XBC
XPC-2
XPR
XBB
Pole
1058C
1070
5" Dia. Fluted Alum.
5" to 3" Dia. Tapered Alum.
1035T
-
Base
4400
700
5200
-
7" to 4" Dia. Cast, Fluted, Tapered Alum.
U.S.ARCHITECTURAL/SUN VALLEY LTG.
www.usaltg.com
Suggested DSTPL Combinations
For additional Decorative Arms,
Shafts, Bases and specifications,
please refer to the Sun Valley
Lighting binder or our website,
www.usaltg.com.
28'
26'
24'
22'
20'
18'
16'
14'
12'
10'
8'
6'
4'
2'
Fixture
DSTPL25
DSTPL25
DSTPL1
DSTPL1-WM
Arm
XBC
XPH
XPR-2
XBB
Pole
1080C
7" to 4" Dia. Cast, Octagonal, Tapered Alum.
6" to 4" Dia. Fluted, Tapered Steel
6" to 4" Dia. Tapered Alum.
1046T
-
Base
1400
3600SB
1300
-
www.usaltg.com
TFS 2164
U.S.ARCHITECTURAL/SUN VALLEY LTG.
48
DSAPM
DSDPM
Prismatic or Opal Glass
Prismatic or Opal Glass
Straight Sided Shade
Curved Sided Shade
DSAPM25
DSDPM25
400W Max.
EPA: 1.52
Max. Wt: 42lbs
41"
400W Max.
EPA: 1.81
Max. Wt: 56lbs
41"
(1041mm)
(1041mm)
24"
26.5"
(610mm)
(673mm)
25"
(635mm)
24"
25"
(610mm)
(635mm)
DSAPM1
24"
(610mm)
DSDPM1
150W Max.
EPA: 0.88
Max. Wt: 34lbs
150W Max.
EPA: 1.21
Max. Wt: 37lbs
41"
41"
(1041mm)
(1041mm)
16.5"
20"
(419mm)
(508mm)
20"
(508mm)
24"
(610mm)
21.5"
(546mm)
24"
(610mm)
SCALE: 3/8" = 1'-0"
49
U.S.ARCHITECTURAL/SUN VALLEY LTG.
www.usaltg.com
DSAPM/DSDPM
Fixture Specifications and Ordering
Housing
Ballast
Diffuser
Fixture
Spec/Order
from this
page.
Socket
Lamp
by Others
Glass
Lens
Housing – Ballast housing is cast from low copper (A356, < 0.2%) aluminum alloy,
minimum .125" wall thickness. Windows in the lower ballast housing allow for decorative
illumination (horizontal optics only). Horizontal louvers (decorative bands – illuminated)
are made of heavy gauge aluminum sheet and welded to the ballast housing. Optical
housing is spun from .080" aluminum, hemmed at the edges. Lens frame is a one-piece
.060" aluminum spinning surrounding a 3/16" tempered glass lens sealed with a
continuous silicone gasket and attaches to the housing with the AccuhingeTM hinging
mechanism. A captive stainless steel thumbscrew allows for tool less entry to the optical
compartment which is sealed with a closed cell E.P.D.M. gasket.
Arms, Poles
and Bases
See pages 51 & 52
for suggested Arm,
Pole and Base
combinations.
Mounting – When pendant mounted, the fixture housing is connected to the mounting
arm by the Trulevel swivel which is internally welded to the housing and allows for fixture
leveling prior to locking the swivel. When side arm mounted, the housing is externally
welded to the mounting arm and the weld is blended to produce a smooth, continuous
joint.
Optics – Refer to page 62 for Optical System Specification.
Electrical Components – Refer to page 62 for Electrical Components Specification.
Finish – Electro-statically applied TGIC Polyester Powder Coat on substrate prepared with
20psi power wash at 140°F. All castings are shot blasted to provide a uniform surface prior
to power wash and paint. A four step iron phosphate pretreatment for protection and
paint adhesion is utilized. 400°F bake for maximum hardness and durability.
Spec/Order Example: DSAPM25/175PSMH277/VR-V-SQ/1/RAL9003/DG/DF
MODEL
LAMP/BALLAST MODE
WATTS
TYPE
VOLTS
STANDARD MAGNETIC BALLAST
DSAPM25
DSDPM25
400
350
320
5
315
250
4
175
3
150T
150
100
PSMH
HPS
120
208
240
277
347 (CAN)
480
OPTICS
MOUNTING
FINISH
HORIZONTAL SEGMENTED
REFLECTORS
ARM MOUNT
STANDARD
TEXTURED FINISH
TYPE I I
HR-II . . . . . . . .
TYPE I I I
HR-III. . . . . . . .
TYPE I V
HR-I V . . . . . . . .
1...............
BLACK
RAL-9005-T
2-180 . . . . . . . . .
WHITE
RAL-9003-T
3-120 . . . . . . . . .
GREY
RAL-7004-T
OPAL CONVEX LENS ACRYLIC ( 175W MAX.) . . . . . . WA
4-90 . . . . . . . . . .
DARK
BRONZE
RAL-8019-T
OPAL CONVEX LENS -
2
E (ELECTRONIC)
FORWARD THROW
STANDARD MAGNETIC BALLAST
DSAPM1
150T
150
100
3
70T
70
50
3
PSMH
HPS
120
208
240
277
347 (CAN)
480
(HOUSE SIDE CUT-OFF)
HR-FT-HSC. . .
TYPE V SQUARE
HR-V-SQ. . . . .
WALL MOUNT
WM . . . . . . . . . . . . .
GREEN
RAL-6005-T
FOR SMOOTH
FINISH REMOVE
SUFFIX “T”
(EXAMPLE:
RAL-9005)
CLEAR CONVEX LENS ACRYLIC ( 175W MAX.) . . . . . . CA
CLEAR CONVEX LENS -
POLYCARBONATE ( 175W MAX.) . . CP
POLYCARBONATE ( 175W MAX.) . . WP
3/4" IPS STEM MOUNT
AND SWIVEL CANOPY
(4'-0" MAX.) . . . . . . . . . . . . . . SM
CHAIN MOUNTED
(4'-0" MAX.) . . . . . . . . . . . . . . CM
HOUSE SIDE SHIELD . . . . . HS
PHOTO CELL + VLOTAGE
(EXAMPLE: PC120V) . . . . PC+V
SINGLE FUSE
(120V, 277V) . . . . . . . . . SF
2 – 120 THRU 277 ONLY
3 – G12 BASE
4 – POSITION SENSITIVE LAMP
DOUBLE FUSE
(208V, 240V) . . . . . . . . . DF
CONSULT FACTORY FOR OTHER BALLAST
CONFIGURATIONS AND LAMP OPTIONS
www.usaltg.com
CONVEX GLASS LENS. . . DG
E (ELECTRONIC)
2
DSDPM1
OPTIONS
CONSULT FACTORY
FOR CUSTOM COLORS
U.S.ARCHITECTURAL/SUN VALLEY LTG.
50
Suggested DSAPM Combinations
For additional Contemporary
Shafts, Arms and specifications,
please
refer
to
the
U.S.
Architectural Lighting binder or
our website, www.usaltg.com.
28'
26'
24'
22'
20'
18'
16'
14'
12'
FSS4
FIXED
STREET SIGN
10'
8'
6'
4'
B4EL-CAP
(ILLUMINATED)
BOLLARD
2'
51
Fixture
DSAPM1/CP
DSAPM25
DSAPM25
DSAPM1-WM
Arm
XPG-2
XPC
XPJ
XWB
Pole
1070
1040
4" Dia. Alum.
7" to 4" Dia. Cast, Fluted, Tapered Alum.
1058C
-
Base
4500
3200
7500
-
5" Dia. Fluted Alum.
U.S.ARCHITECTURAL/SUN VALLEY LTG.
www.usaltg.com
Suggested DSDPM Combinations
For additional Decorative Arms,
Shafts, Bases and specifications,
please refer to the Sun Valley
Lighting binder or our website,
www.usaltg.com.
28'
26'
24'
22'
20'
18'
16'
14'
12'
10'
8'
6'
4'
2'
Fixture
DSDPM1
DSDPM25
DSDPM1
DSDPM1-WM
Arm
XPR
XBC
XPC-2
XWA
Pole
RTA 1853-188
TFS 2064
6" to 4" Dia. Cast, Fluted, Tapered Steel
5" Dia. Alum.
RNTA 205-188
-
Base
3300
4400SB
-
-
www.usaltg.com
5" to 3" Dia. Tapered Alum.
U.S.ARCHITECTURAL/SUN VALLEY LTG.
52
DSCPM
DSTPM
Prismatic or Opal Glass
Prismatic or Opal Glass
Curved Sided Shade
Straight Sided Shade
DSCPM25
DSTPM25
250W Max.
EPA: 1.40
Max. Wt: 58lbs
250W Max.
EPA: 1.21
Max. Wt: 54lbs
41"
41"
(1041mm)
(1041mm)
19"
22.5"
(483mm)
(572mm)
28"
(711mm)
25"
24"
(635mm)
(610mm)
24"
(610mm)
DSTPM1
DSCPM1
150W Max.
EPA: .83
Max. Wt: 31lbs
150W Max.
EPA: 0.74
Max. Wt: 36lbs
41"
41"
(1041mm)
15"
(1041mm)
16.5"
(419mm)
(381mm)
22"
(559mm)
20"
24"
(508mm)
(610mm)
24"
(610mm)
SCALE: 3/8" = 1'-0"
53
U.S.ARCHITECTURAL/SUN VALLEY LTG.
www.usaltg.com
DSCPM/DSTPM
Fixture Specifications and Ordering
Housing
Ballast
Diffuser
Fixture
Spec/Order
from this
page.
Socket
Lamp
by Others
Glass
Lens
Housing – Ballast housing is cast from low copper (A356, < 0.2%) aluminum alloy,
minimum .125" wall thickness. Windows in the lower ballast housing allow for decorative
illumination (horizontal optics only). Horizontal louvers (decorative bands – illuminated)
are made of heavy gauge aluminum sheet and welded to the ballast housing. Optical
housing is spun from .080" aluminum, hemmed at the edges. Lens frame is a one-piece
.060" aluminum spinning surrounding a 3/16" tempered glass lens sealed with a
continuous silicone gasket and attaches to the housing with the AccuhingeTM hinging
mechanism. A captive stainless steel thumbscrew allows for tool less entry to the optical
compartment which is sealed with a closed cell E.P.D.M. gasket.
Arms, Poles
and Bases
See pages 55 & 56
for suggested Arm,
Pole and Base
combinations.
Mounting – When pendant mounted, the fixture housing is connected to the mounting
arm by the Trulevel swivel which is internally welded to the housing and allows for fixture
leveling prior to locking the swivel. When side arm mounted, the housing is externally
welded to the mounting arm and the weld is blended to produce a smooth, continuous
joint.
Optics – Refer to page 62 for Optical System Specification.
Electrical Components – Refer to page 62 for Electrical Components Specification.
Finish – Electro-statically applied TGIC Polyester Powder Coat on substrate prepared with
20psi power wash at 140°F. All castings are shot blasted to provide a uniform surface prior
to power wash and paint. A four step iron phosphate pretreatment for protection and
paint adhesion is utilized. 400°F bake for maximum hardness and durability.
Spec/Order Example: DSTPM25/150TPSMH277E/HR-II/1/RAL7004
MODEL
LAMP/BALLAST MODE
WATTS
TYPE
VOLTS
STANDARD MAGNETIC BALLAST
4
DSCPM25
250
4
175
3
150T
100
100
PSMH
HPS
120
208
240
277
347 (CAN)
480
E (ELECTRONIC)
STANDARD MAGNETIC BALLAST
DSCPM1
150T
150
100
3
70T
70
50
3
PSMH
HPS
120
208
240
277
347 (CAN)
480
2
E (ELECTRONIC)
DSTPM1
FINISH
HORIZONTAL SEGMENTED
REFLECTORS
ARM MOUNT
STANDARD
TEXTURED FINISH
TYPE I I
HR-II . . . . . . . .
TYPE I I I
HR-III. . . . . . . .
FORWARD THROW
(HOUSE SIDE CUT-OFF)
HR-FT-HSC. . .
TYPE V SQUARE
HR-V-SQ. . . . .
1...............
BLACK
RAL-9005-T
2-180 . . . . . . . . .
WHITE
RAL-9003-T
3-120 . . . . . . . . .
GREY
RAL-7004-T
4-90 . . . . . . . . . .
DARK
BRONZE
RAL-8019-T
WALL MOUNT
WM . . . . . . . . . . . . .
GREEN
RAL-6005-T
FOR SMOOTH
FINISH REMOVE
SUFFIX “T”
(EXAMPLE:
RAL-9005)
2 – 120 THRU 277 ONLY
3 – G12 BASE
4 – POSITION SENSITIVE LAMP
CONSULT FACTORY FOR OTHER BALLAST
CONFIGURATIONS AND LAMP OPTIONS
www.usaltg.com
MOUNTING
TYPE I V
HR-I V . . . . . . . .
2
DSTPM25
OPTICS
OPTIONS
CONVEX GLASS LENS. . . DG
CLEAR CONVEX LENS ACRYLIC ( 175W MAX.) . . . . . . CA
CLEAR CONVEX LENS -
POLYCARBONATE ( 175W MAX.) . . CP
OPAL CONVEX LENS ACRYLIC ( 175W MAX.) . . . . . . WA
OPAL CONVEX LENS -
POLYCARBONATE ( 175W MAX.) . . WP
3/4" IPS STEM MOUNT
AND SWIVEL CANOPY
(4'-0" MAX.) . . . . . . . . . . . . . . SM
CHAIN MOUNTED
(4'-0" MAX.) . . . . . . . . . . . . . . CM
HOUSE SIDE SHIELD . . . . . HS
PHOTO CELL + VLOTAGE
(EXAMPLE: PC120V) . . . . PC+V
SINGLE FUSE
(120V, 277V) . . . . . . . . . SF
DOUBLE FUSE
(208V, 240V) . . . . . . . . . DF
CONSULT FACTORY
FOR CUSTOM COLORS
U.S.ARCHITECTURAL/SUN VALLEY LTG.
54
Suggested DSCPM Combinations
For additional Contemporary
Shafts, Arms and specifications,
please
refer
to
the
U.S.
Architectural Lighting binder or
our website, www.usaltg.com.
28'
26'
24'
22'
20'
18'
16'
14'
12'
10'
8'
6'
4'
B23C-BAL
BOLLARD
2'
55
Fixture
DSCPM25
DSCPM1/WP
DSCPM1
DSCPM1-WM
Arm
XBC
XPH
XPG-2
XPC
Pole
RNTS 204-11
1060
4" Dia. Fluted Alum.
6" to 4" Dia. Tapered Alum.
1046T
-
Base
-
4000
4400
-
4" Dia. Steel
U.S.ARCHITECTURAL/SUN VALLEY LTG.
www.usaltg.com
Suggested DSTPM Combinations
For additional Decorative Arms,
Shafts, Bases and specifications,
please refer to the Sun Valley
Lighting binder or our website,
www.usaltg.com.
28'
26'
24'
22'
20'
18'
16'
14'
12'
RBH
ROTATABLE
BASKET HOLDER
10'
8'
6'
4'
B13E-BAL
BOLLARD
2'
Fixture
DSTPM25
DSTPM1
DSTPM1
DSTPM1-WM
Arm
XBC
XPC-2
XPR
XPE
Pole
TFS 2064
1060
4" Dia. Fluted Alum.
4" Dia. Alum.
1040
-
Base
3600SB
2400SB
400M
-
6" to 4" Dia. Fluted, Tapered Steel
www.usaltg.com
U.S.ARCHITECTURAL/SUN VALLEY LTG.
56
DSS
Curved Sided Shade
Prismatic or Opal Glass
DSS1
400W Max.
EPA: 1.72
Max. Wt: 58lbs
41"
(1041mm)
23.5"
(597mm)
30"
(762mm)
24"
(610mm)
DSS2
150W Max.
EPA: 0.71
Max. Wt: 26lbs
41"
(1041mm)
15"
(381mm)
20"
(508mm)
24"
(610mm)
SCALE: 3/8" = 1'-0"
57
U.S.ARCHITECTURAL/SUN VALLEY LTG.
www.usaltg.com
DSS
Fixture Specifications and Ordering
Ballast
Housing
Fixture
Spec/Order
from this
page.
Socket
Lamp
by Others
Glass
Lens
Housing – (For up to 175W) – Ballast housing is spun from .080" aluminum. Internal ballast
support bracket also functions as mounting reinforcement plate and has a minimum
thickness of .125". (For 250W & above) – Ballast housing is cast from low copper (A356, <
0.2%) aluminum alloy, minimum .125" wall thickness. Optical housing is spun from .080"
aluminum, hemmed at the edges. Lens frame is a one-piece .060" aluminum spinning
surrounding a 3/16" tempered glass lens sealed with a continuous silicone gasket and
attaches to the housing with the AccuhingeTM hinging mechanism. A captive stainless
steel thumbscrew allows for tool less entry to the optical compartment which is sealed
with a closed cell E.P.D.M. gasket.
Arms, Poles
and Bases
See pages 59 & 60
for suggested Arm,
Pole and Base
combinations.
Mounting – When pendant mounted, the fixture housing is connected to the mounting
arm by the Trulevel swivel which is internally welded to the housing and allows for fixture
leveling prior to locking the swivel. When side arm mounted, the housing is externally
welded to the mounting arm and the weld is blended to produce a smooth, continuous
joint.
Optics – Refer to page 62 for Optical System Specification.
Electrical Components – Refer to page 62 for Electrical Components Specification.
Finish – Electro-statically applied TGIC Polyester Powder Coat on substrate prepared with
20psi power wash at 140°F. All castings are shot blasted to provide a uniform surface prior
to power wash and paint. A four step iron phosphate pretreatment for protection and
paint adhesion is utilized. 400°F bake for maximum hardness and durability.
Spec/Order Example: DSS1/315PSMH277E/HR-III/1/BL-RAL9005-T
MODEL
LAMP/BALLAST MODE
WATTS
TYPE
VOLTS
STANDARD MAGNETIC BALLAST
DSS1
400
PSMH
350
HPS
320
5
315
250
5
210
200
2
64LED
2
80LED
2
120LED
120
208
240
277
347 (CAN)
480
DSS2
120
208
240
277
347 (CAN)
480
2
E (ELECTRONIC)
2 – 120 THRU 277 ONLY
3 – G12 BASE
4 – POSITION SENSITIVE LAMP
5 – “E” BALLAST ONLY
CONSULT FACTORY FOR OTHER BALLAST
CONFIGURATIONS AND LAMP OPTIONS
www.usaltg.com
HORIZONTAL SEGMENTED
REFLECTORS
ARM MOUNT
STANDARD
TEXTURED FINISH
TYPE I I
HR-II . . . . . . . .
TYPE I I I
HR-III. . . . . . . .
TYPE I V
HR-I V . . . . . . . .
HR-FT-HSC. . .
STANDARD MAGNETIC BALLAST
PSMH
HPS
FINISH
(HOUSE SIDE CUT-OFF)
2
150T
150
100
3
70T
70
50
2
64LED
2
80LED
MOUNTING
1.............
BLACK
RAL-9005-T
2-180 . . . . . . .
WHITE
RAL-9003-T
3-120 . . . . . . .
GREY
RAL-7004-T
4-90 . . . . . . . .
DARK
BRONZE
RAL-8019-T
FORWARD THROW
E (ELECTRONIC)
3
OPTICS
TYPE V SQUARE
HR-V-SQ. . . . .
WALL MOUNT
WM . . . . . . . . . . .
VERTICAL SEGMENTED
REFLECTORS
ASYMMETRIC
VR-ASY. . .
GREEN
RAL-6005-T
FOR SMOOTH
FINISH REMOVE
SUFFIX “T”
(EXAMPLE:
RAL-9005)
SYMMETRIC
VR-V-SQ. . . .
CONVEX GLASS LENS. . . DG
CLEAR CONVEX LENS ACRYLIC ( 175W MAX.) . . . . . . CA
CLEAR CONVEX LENS -
POLYCARBONATE ( 175W MAX.) . . CP
OPAL CONVEX LENS ACRYLIC ( 175W MAX.) . . . . . . WA
OPAL CONVEX LENS -
POLYCARBONATE ( 175W MAX.) . . WP
3/4" IPS STEM MOUNT
AND SWIVEL CANOPY
(4'-0" MAX.) . . . . . . . . . . . . . . SM
CHAIN MOUNTED
(4'-0" MAX.) . . . . . . . . . . . . . . CM
HOUSE SIDE SHIELD . . . . . HS
PHOTO CELL + VLOTAGE
(EXAMPLE: PC120V) . . . . PC+V
SINGLE FUSE
(120V, 277V) . . . . . . . . . SF
DOUBLE FUSE
(208V, 240V) . . . . . . . . . DF
MODEL-1 FLAT GLASS LENS STANDARD FOR
VERTICAL SEGMENTED REFLECTOR
MODEL-2 VERTICAL SEGMENTED REFLECTOR
REQUIRES CONVEX GLASS
OPTIONS
CONSULT FACTORY
FOR CUSTOM COLORS
U.S.ARCHITECTURAL/SUN VALLEY LTG.
58
Suggested DSS Combinations
For additional Contemporary
Shafts, Arms and specifications,
please
refer
to
the
U.S.
Architectural Lighting binder or
our website, www.usaltg.com.
28'
26'
24'
22'
20'
18'
16'
14'
12'
10'
8'
6'
4'
B13E-BAL
BOLLARD
2'
59
Fixture
DSS1
DSS2
DSS2
Arm
XBC
XPC-2
XPR
Pole
TFS 2564
6" to 4" Dia. Tapered Steel
6" to 4" Dia. Tapered Alum.
1060
1030
Base
3600SB
3200
400M
U.S.ARCHITECTURAL/SUN VALLEY LTG.
3" Dia. Alum.
www.usaltg.com
Suggested DSS Combinations
For additional Decorative Arms,
Shafts, Bases and specifications,
please refer to the Sun Valley
Lighting binder or our website,
www.usaltg.com.
28'
26'
24'
22'
20'
18'
16'
14'
SM
STEM MOUNT
12'
10'
8'
6'
4'
2'
Fixture
DSS2
DSS1
DSS2
DSS2-WM
Arm
XBB-2
XPS
-
XWA
Pole
RNTS 185-7
RTA 2574-188
-
-
Base
-
-
www.usaltg.com
5" Dia. Steel
7" to 4" Dia. Tapered Alum.
-
-
U.S.ARCHITECTURAL/SUN VALLEY LTG.
60
Lamp / Electrical Guide
LAMP
WATTS
LAMP
TYPE
BULB
TYPE
PULSE START METAL HALIDE
70
PSMH
Clear, ED17, Med. Base
T6,G12 Base
INITIAL
LUMENS
LIFE
(HOURS)
ANSI
CODE
STARTING
TEMP.
CIRCUIT
TYPE
SYSTEM
WATTS
VOLTS
MAX
INPUT AMPS
5,900
6,600
24,000
12,000
M98
M139
M143
-20°F
Electronic
82
81
90
90
90
90
90
94
120
277
120
208
240
277
347
347
0.68
0.31
1.90
1.00
0.90
0.80
0.70
0.65
2
2
4
3
2
2
2
2
115
113
129
129
129
129
129
120
277
120
208
240
277
347
0.96
0.42
2.30
1.40
1.20
1.00
1.00
3
3
6
4
3
3
2
165
161
185
185
185
185
185
120
277
120
208
240
277
347
1.40
0.60
3.70
2.10
1.80
1.60
1.30
2
2
4
3
2
2
2
HX-HPF
M139
100
PSMH
Clear, ED17, Med Base
9,000
24,000
M90
-20°F
M140
150
PSMH
Clear, ED17, Med Base
T6, G12 Base
Electronic
HX-HPF
13,000
12,700
24,000
12,000
M102
M142
-20°F
Electronic
HX-HPF
MIN.
FUSE AMPS
210
PSMH
Clear, T9, PGZ18 Base
23,000
20,000
C183/E
-4°F
Electronic
229
227
200 (208V)
277
1.20
0.90
3
3
250
PSMH
Clear, ED28, Mog. Base
Horiz. only
22,000
15,000
M138
M153
-20°F
Super CWA
291
291
291
291
291
120
208
240
277
347
2.50
1.40
1.30
1.10
0.90
8
5
5
3
3
315
PSMH
Clear, T9, PGZ18 Base
36,200
20,000
C182/E
-4°F
Electronic
343
341
200 (208V)
277
1.80
1.30
3
3
400
PSMH
Clear, ED28, Mog. Base
Horiz. only
Clear, ED28, Mog. Base
Vert. only
40,000
20,000
M135
-20°F
Electronic
40,000
20,000+
M155
M172
-20°F
Super CWA
430
430
452
452
452
452
450
452
200 (208V)
277
120
208
240
277
347
480
2.20
1.60
3.80
2.20
1.90
1.70
1.40
1.00
3
3
10
7
5
5
4
3
HIGH PRESSURE SODIUM
70
HPS
Clear, BD17, Med. Base
6,300
24,000
S62
-40°F
HX-HPF
91
91
91
91
93
120
208
240
277
347
1.40
0.90
0.80
0.70
0.60
5
3
2
2
2
100
HPS
Clear, BD17, Med. Base
9,500
24,000
S54
-40°F
HX-HPF
130
130
130
130
130
120
208
240
277
347
2.20
1.30
1.10
0.90
0.70
7
5
3
3
3
150
HPS
Clear, BD17, Med. Base
16,000
24,000
S55
-40°F
HX-HPF
188
188
188
188
188
120
208
240
277
347
2.80
1.60
1.40
1.30
0.90
10
5
5
4
3
250
HPS
Clear, ED18, Mog. Base
27,000
24,000
S50
-40°F
CWA
295
295
295
295
295
120
208
240
277
347
2.50
1.50
1.30
1.10
0.90
7
4
4
3
2
400
HPS
Clear, ED18, Mog. Base
50,000
24,000
S51
-40°F
CWA
464
464
464
464
464
464
120
208
240
277
347
480
3.80
2.20
1.90
1.70
1.30
1.00
10
8
5
5
5
3
48
LED
Straight 48 LED Optical
Tower Module
4,800
60,000 120,000
-40°F
60
120
277
0.60
0.30
64
LED
64
®
Optical Module
3,437 3,740
70,000 140,000
-40°F
71
120
277
0.70
0.40
80
LED
80
®
Optical Module
3,906 4,251
70,000 140,000
-40°F
88
120
277
0.80
0.40
120
LED
120
Optical Module 5,240 5,808
70,000 140,000
-40°F
132
120
277
1.20
0.60
LED
61
®
U.S.ARCHITECTURAL/SUN VALLEY LTG.
www.usaltg.com
Optical System/Electrical Components Specifications
See
Catalog for a complete
presentation on the
System.
HID
LED
DSA/DSC/DSD/DST/DSH
DSA/DSC/DSD/DST/DSH/DSAR/DSCR/DSDR/
DSTR/DSHR/DSARB/DSCRB
Optics – A clear tempered glass linear prismatic diffuser seals
against the housing with a closed cell EPDM gasket and
imparts a round Type V distribution. Medium base (E26) or
bi-pin base (G12) socket provided for the lamp. Lamp is
vertically oriented.
DSAR/DSCR/DSDR/DSTR/DSHR/DSARB/DSCRB
Optics - For Standard Polycarbonate Refractor - A clear
prismatic polycarbonate lens, utilizing UvaLex® to retard
yellowing from UV, seals against the housing with a closed cell
EPDM gasket.
For Optional Acrylic Refractor - A clear prismatic acrylic
lens seals against the housing with a closed cell EPDM gasket.
Medium base (E26) or bi-pin base (G12) socket provided for
the lamp. Lamp is vertically oriented.
DSAP/DSCP/DSDP/DSTP/DSAPL/DSCPL/DSDPL/
DSTPL/DSAPM/DSCPM/DSDPM/DSTPM/DSS
Reflector Module - Specular Alzak® optical segments rigidly
mounted in an aluminum frame, which attaches to the
housing as a one piece module. Reflector module is field
rotatable in 90°increments. All sockets are porcelain 4KV pulse
rated, medium base (E26) for 50W – 150W, bi-pin (G12) for 70W
and 150W, or pinoriented mogul base (E40) for 250W and
400W (DSS only). Reflector modules are factory prewired with a
quick-disconnect plug. Lamp is vertically or horizontally
mounted.
DSA/DSC/DSD/DST/DSH/DSAR/DSCR/DSDR/
DSTR/DSHR/DSARB/DSCRB
Electrical Components - All electrical components are UL
and cUL recognized mounted on a single plate and factory
wired with quick-disconnect. Electrical module attaches to
housing with toolless hinge and latch. Electronic MH ballasts
have power factor of >.95, -20°F starting, 120-277V 50Hz/60Hz
and have lamp End-of-life protection. Magnetic MH ballasts
are high power factor, -20°F starting, multi-tap 120-277V, 60Hz.
All HPS ballasts are core and coil, high-reactance, high power
factor, -40°F starting.
DSAP/DSCP/DSDP/DSTP/DSAPL/DSCPL/DSDPL/
DSTPL/DSAPM/DSCPM/DSDPM/DSTPM/DSS
Electrical Components – All electrical components are UL
and cUL recognized mounted on a single plate and factory
wired with quick-disconnect. Electrical module attaches to
housing with toolless hinge and latch. Electronic MH ballasts
have power factor of >.95, -20°F starting, 120-277V 50Hz/60Hz
and have lamp End-of-life protection. Special for Philips
MasterColor CDM Elite: Electronic MH ballast has a power
factor of >.90 (210W & 315W), -4°F starting, 200 - 277V,
50Hz/60Hz and has lamp End-of-life protection. 315W
electronic MH ballast has 0 – 10V dimming capability.
Magnetic MH ballasts are high power factor (70W – 150W) or
CWA (250W), -20°F starting, multi-tap 120-277V, 60Hz. All HPS
ballasts are core and coil, high-reactance, high power factor
(70W – 150W) or CWA (200W – 250W), -40°F starting.
®
®
LED Tower Module - LED optical assembly consists of an
array of 6 LED “capsules” mounted to a barrier plate and
aimed 60° apart. Each capsule consists of LED’s mounted to a
vented circuit board with copper lined holes which conduct
heat from the component side of the circuit board to the
mounting side. Stainless steel screws are located between
each LED to secure the circuit board to a heat-transfer plate
which in turn is mounted to an extruded aluminum finned
heat-sink. Each LED has a specular formed and polished
reflector optic to direct output downward through an etched
acrylic lens. The entire assembly is enclosed by a clear
tempered glass linear prismatic diffuser or optional opal glass
diffuser (DSA/DSC/DSD/DST/DSH); or a clear polycarbonate
(optional acrylic) refractor which produces an IES Type II, Type
III, Type IV, or Type V Round distribution
(DSAR/DSCR/DSDR/DSTR/DSH/ DSHR/DSARB/DSCRB)
DSAP/DSCP/DSDP/DSTP/DSAPL/DSCPL/DSDPL/
DSTPL/DSAPM/DSCPM/DSDPM/DSTPM/DSS
Optical Module – Low copper A356 alloy (<.2%
copper) cast aluminum housing. Integrated clear tempered
3/16” glass lens sealed with a continuous silicone gasket
protects emitters (LED's) and emitter Reflector-Prism optics, and
seals the module from water intrusion and environmental
contaminants. Entire module is IP67 rated. Emitters (LED's) are
Luxeon Rebels, high output, Neutral White nominal 4100K CCT
for the entire module (Cool White nominal 6500K are
available). Each emitter is optically controlled by a
Reflector-Prism injection molded from H12 acrylic (3 types per
module; one from 0° - 50°; one from 50° - 65°; one from 65° 72°). Each Reflector-Prism has indexing pins for aiming and is
secured to an optical plate made of matte black anodized
aluminum. The optical plate locates every Reflector-Prism over
an emitter. Reflector-Prisms are secured to the optical plate
with a UV curing adhesive. The Reflector-Prisms are arrayed to
produce IES Type II, IES Type III, IES Type IV, and IES Type V-SQ
distributions. The entire Optical Module is field rotatable in 90°
increments. Both module and drivers are factory wired using
water resistant, insulated cord. Lens, module and drivers are
field replaceable.
®
LED Driver(s) – Drivers are UL and cUL recognized mounted
on a single plate and factory wired with quick-disconnect.
Constant current drivers are electronic and have a power
factor of >.90 and a minimum operating temperature of - 40°F.
Drivers accept an input of 120-277V, 50/60Hz. (Consult factory
for dimming applications.)
NOTES:
1
U.S. Architectural Lighting’s Lamp and Electrical Guide is for reference only. ALWAYS consult lamp and ballast manufacturer’s data for exact technical specifications.
2
All Initial Lumen values shown are approximate and may vary from one manufacturer to another.
3
For HX-HPF circuits, Max Input Amps is the highest of starting, operating, or opening circuit currents. For CWA circuits, the figure is operating current.
4
Lumen values for LED Modules vary according to the distribution type.
WARNING: All fixtures must be installed in accordance with local codes or the National Electrical Code. Failure to do so may result in serious personal injury.
www.usaltg.com
U.S.ARCHITECTURAL/SUN VALLEY LTG.
62
DS SERIES
U.S. POLE COMPANY
660 West Avenue O
Palmdale, California 93551
Toll Free (800) 877-6537
www.usaltg.com
Download