BLUESIL ™, CAF ®, LYNDCOAT ®
More than just
outstanding
silicones
properties
A vast range of products
specially designed for automotive
manufacturers and equipment suppliers
On the strength of 50 years of experience in Silicones
technology, Bluestar Silicones offers automotive industry
manufacturer, equipment supplier or sub-contractors
customers an extensive range of products to meet
their increasingly demanding requirements in terms of
performance features, reliability and cost effectiveness.
An innovation strategy based on
partnership and cross-fertilization
of technologies
Silicones solutions
for automotive industry
Bluestar Silicones. Delivering Your Potential.
Bluestar Silicones France SAS:
21, avenue Georges Pompidou - 69486 Lyon cedex 03 - Tel: +33 (0)4 72 13 19 00 - Fax: +33 (0)4 72 13 19 88 - www.bluestarsilicones.com
Bluestar Silicones has set itself the mission of partnering
with customers in jointly developing tailor-made solutions
to best meet their functional requirements.
Besides our outstanding expertise in Silicones technology,
Bluestar Silicones also gives customers access to other
technologies and expertise within the Bluestar group.
u BLUESILTM
> Heat curing rubber HCR
> Heat and radiation curing resins
> Oil, emulsions and greases
> Two component elastomers: RTV-2
> Electronic silicone adhesives: ESA
u CAF®
> Room temperature vulcanizing elastomers
• without accelerator: CAF®, RTV-1
• with accelerator: CAF®, AXAD,
Activated RTV-2
u LYNDCOAT®
> Emulsions
Silicones
solutions
for automotive industry
UNDER THE HOOD
Spark plug boots and Ignition sets
AIRBAG TEXTILE COATINGS
u Excellent electrical insulation and Thermal
Resistant Rubbers.
u Complete range of RTV-2 and LSR
for Airbag textile coating.
Hoses for Turbo charger and cooling system
See our specific Brochure.
u Thermally resistant, flexible rubbers, with
superior resistance to lubricants and cooling
fluids.
TIRE RELEASE
CVJ Boots and Bellows
u Thermal resistance and Durability.
uHigh elasticity rubbers providing
outstanding Oil resistance and Durability.
u Complete range of Silicone Emulsions
for Tire Demolding.
u Release, Lubrication, and Thermal stability.
See our specific Brochure.
OTHER AUTO PARTS
ON-BOARD ELECTRONICS
Head Lamp and Sun-Roof Gasketing
Electronic Devices, Sensors
u Bonding/Sealing RTV-1
> Excellent adhesion on plastic substrates,
Non corrosive, UV and Thermal Resistance
u Molded Gaskets Rubbers
> UV Durable, High Compression set
uRTV-1, RTV-2, Gels for:
> Potting/Encapsulation
> Bonding
> Thermal protecting/conducting
> Vibration damping
Connectors and Cable Grommets
for Electrical Connections
uEasy on-line processing, Electrical
performances, non corrosive.
u Self-bleeding Rubbers
Exhaust Hangers
u High Thermal resistance, Excellent damping,
Mechanical performance and Durability
Power windows, Power door Lock
Mechanisms, ...
POWER-TRAIN
u Plastic/plastic and plastic/metal wide
temperature range Greases;
> Resistance to oxidation and corrosion.
Engine and Gearbox Gasketing
Cylinder head cover (CiPG, FiPG)
Oil pump (CiPG, FiPG)
Gas recovery housing (CiPG)
Cylinder head gasket
Oil filter
Clutch case/Gear box housing (FiPG)
Cylinder case (FiPG)
u RTV-1 and Activated RTV-2 for:
> Cured in Place Gaskets (CiPG)
> Formed in Place Gaskets (FiPG)
Cylinder Head Gaskets
u Varnishing and Impregnating Resins
u Shoulder silk-screening RTV-2
u Easy on-line processing, thermal
performance and resistance to lubricants
and cooling fluids, outstanding Durability
and Compression set.
Gearbox, Starter units Lubrication
Oil sump (CiPG, FiPG)
Gear box rear housing (FiPG)
u Wide temperature range lubricating and
excellent wash-out resistance Greases.
Functions / Applications
GASKETING
ASSEMBLY / BONDING
• Head gasket-oil sump
• Cylinder head cover-timing chain cover
• Bearing bar – gear box-water pump
• Oil pump- inlet and exhaust manifold
• O-rings
• Oil filters
• Water and air hoses
• Lamps and indicators
• Heating
• Engine cooling
• Electronic boxes
• Airbag
• CVJ boots
• Sunroof seals
• Air conditioning/ventilation
• Lamps and indicators
• Alternators/starter motors
THERMAL PROTECTION
• Air and water hoses
• Lamps and indicators
• Airbag-exhaust mountings
• Heat Shields
LUBRIFICATION
• O-rings connectors and cable grommets
• Gearbox, Starter units
• Power windows, Power door lock
Damping/vibration proofing
u
u
Elastomers,
Resins,
Emulsions,
Greases,
Oils
• Water and air hoses
• Exhaust retention
• CVJ boots
• Noise proofing/vibration proofing mountings
u
u
u
u
Electrical insulation
u
• Spark plug boots
• Ignition cables
• Alternators/starter motors
• Engine cooling
• Electronic boxes, Sensors
• Connectors and cable grommets
demolding
• Tire demolding
Functions & applications
5
grea
grea
grea
se 5
3
Tap
g





Metal / plastics mechanisms,
power door (lock systems,
power windows)


gear boxes, Starters units

Transmission parts

Piston, O ring

ONE COMPONENT
bi COMPONENT





Water pump
Oil pump
intake manifold
Oil filter
Headlamps
bONdiNg
bonding of plastic parts
bonding of metal parts
Sun-roof seals







bOdyWORK Molded gasket
CHASSiS
Anti-vibration assembly
 Acetoxy products -  Alcoxy products -  Oxime Low MEKO products -  Activated acetoxy products
Ad
1 AX
575
565












Ad
1 AX
Ad
562
576
1
2S
555
510





Cured in place injected
gasket (CiPg) gasket
CAF ®















CAF ®



CAF ®



injected
gasket
CAF ®



CAF ®
CAF ®



Engine front cover
gear box
50
2
566
44
CAF ®
dRiVE
TRAiN
gASKETS
CAF ®
Oil sump
CAF ®
33
bed plate
CAF ®
Cylinder head cover
566
1
Formed in place gasket (FiPg)
CAF ®
caF®
1 AX
LubRiCATiON
se 3
08
te 4
Corrosion
Pas
PROTECTiON
4
greases
r eas
e
Paste
se 4
BluesiltM Pastes & greases








Processing
CAF®, BluesilTM & CAF® Axad can be applied by a
variety of methods ranging from manual dispensing
to automatic dispensing units for cartridge, pail or
drum packages. We have strong relationships with
automatic dispensing equipment suppliers.
Technical service
Bluestar Silicones France SAS
21, avenue Georges Pompidou
F-69486 Lyon Cedex 03 - France
Tel: +33 (0)4 72 13 19 00 - Fax: +33 (0)4 72 13 19 88
www.bluestarsilicones.com
SIL 12 001 3-1GL
PEMACO - Photos: Bluestar Silicones - Thomasz Pietryszek
Our technical service laboratory carries out analyses
and tests to assess the performance of its silicones
in a given application. We participate in the design
of the parts in order to optimize the performances
of our products. We also offer our customers the
possibility of producing prototype series with our
dispensing equipment or in close cooperation with a
specialist dispensing equipment supplier. Technical
support for mass production is provided by teams of
specialized technicians with both silicones materials
and gasketing functions competencies.
Silicones Solutions
for Gasketing & Lubricating
Power-train sealing
Silicone Gasket
Automotive Power-train requires numerous gaskets
for fluids as lubricating oils (oil pump, rocker cover,
or gear box casing), cooling liquids (water pump) and
air (air filter). The thermal and chemical stability of
silicone elastomers makes them unique candidates
to ensure durability of these gaskets.
Composite Silicone Gasket, MLS
Cam Cover
Cylinder
Head
Inlet Passage
Regulator
Water
Pump
Engine Block
Clutch
Bell
Housing
Oil Filter
Gearbox
Casing
Tail
Housing
Bed plate
Bluestar Silicones has developed a unique range
of materials for the following technologies:
Front Cover
Friction
Oi Pump
ENGINE
GEARBOX
uC
ured in Place Gaskets (CiPG) with CAF® Axad,
activated RTV-2 range
uF
ormed in Place Gaskets (FiPG) with CAF®,
RTV-1 range
Our expertise in this field covers material performances,
recommendation on the parts design and the
partnership with dispensing equipment manufacturers
for implementation on industrial lines.
Sealing & Bonding
other applications
benefits
uS
un-roof sealing
uH
ead lamps, lightening systems
bonding
uA
ir conditioning and ventilation
uH
eating devices
BluesilTM,CAF®,
Axad
u Outstanding resistance to most engine and
gearbox lubricant oils
uH
igh adhesion, sealing performance and
reliability
uL
ubrication
uF
ully adapted to robotic dispensing equipments
uA
lternators and starters
uN
o gasket handling and no gasket positioning
uD
ifferentiel
uP
ower window and power
door lock mechanism
problems
uR
eduction on inventory - one silicone, several gaskets
uF
ast on-line quality control
Bluestar
Silicones.
Delivering
Your
Potential.
Bluestar
Silicones.
Delivering
Your
Potential.
Bluestar
Silicones
France
SAS:
Bluestar
Silicones
France
SAS:
21,21,
avenue
Georges
Pompidou
- 69486
Lyon
cedex
03 03
- Tel:
+33+33
(0)4(0)4
72 72
13 13
19 19
00 00
- Fax:
+33+33
(0)4(0)4
72 72
13 13
19 19
88 88
- www.bluestarsilicones.com
avenue
Georges
Pompidou
- 69486
Lyon
cedex
- Tel:
- Fax:
- www.bluestarsilicones.com
Gasketing
CAF®
One comp
Formed in place
CAF® 33
CAF® 44
CAF® 5661
CAF® 5662
Product category
White-trans-black
Grey
Ivory
Black
Cure-type
Acetoxy
Acetoxy
Acetoxy
Acetoxy
Specific gravity at 25°C (1)
1.04
1.03
1.14
1.12
Viscosity (mPa.s) (2)
-
-
-
-
50
170
100
120
Flowability (4)
<2 mm
1 mm
<5 mm
<5 mm
Skin formation time (min) (5)
4
7
6
6
5
4
4
4
(3)
Cured thickness after 24 h (mm) (5)
(6)
Shore A hardness for 6 mm thick section (points) 25
38
57
55
Secant modulus for 100 % elongation (MPa)
(7)
0.6
1.9
3.3
2.5
Mechanical Tensile strength (MPa) (7)
properties
(7)
after curing Elongation at break (%)
(7 days)
Lap shear strength (MPa) (8) *
Physical
properties
after curing
storage
Thixotropic, adhesive
Color
Extrusion (g/min)
CURED
COMPOUND
Thixotropic,
adhesive
High heat stability, High mechanical High mechanical
High mechanical
fluids resistance
properties, oil
properties, oil
properties, oil
resistance
resistance
resistance
Main characteristics
Properties
before
curing
Thixotropic, High extrusion
adhesive
2.5
2.9
5.8
5
500
280
200
220
1.4
1.1
2.5
2.2
Type of failure CF / AF *
CF
AF
CF
CF
Oil resistance
+++
+++
++++
++++
-65
-60
-65
-60
250
200
250
250
300 (Black)
250
300
300
24
24
18
18
Lower service temperature (°C)
Maximum continuous service temperature, 1000
h (°C)
Maximum peak service temperature, 72 h (°C)
Shelf life from the production date (months)
* 14 days
(1) ISO R 1183, DIN 53479, NM 703
(2) Brookfield NF T 76105, ASTM D 445
(3) NM 495 A 3 mm / 3 bars
Formed in Place Gasket (FiPG):
CAF®
FiPG
Formed-in-Place
uT
he bead is applied to one of the parts to be
assembled.
u In the few minutes following application
and before skin formation, the part with the
bead is brought together with the other part.
Adhesion increases as the CAF® bead cures,
thus ensuring sealing.
CiPG
Cured-in-Place
uD
ismantling does not damage the parts and
a new bead must be laid when reassembling
after repair (this operation can be carried out
manually).
FiPG
Formed-in-Place
Cured in Place Ga
CAF® Axad
CiPG
Cured-in-Place
onent
Bi component
Gasket (FIPG)Injected gasket
CAF® 50 CAF® 510
CAF® 5552S
CAF® 5761
Thixotropic, self-
adhesive, neutral
Thixotropic, self-
adhesive, neutral
Thixotropic, self-
Flowing
adhesive, neutral
Cured in place gasket (CiPG)Injected gasket
CAF® 5621
CAF® 5651
CAF® 5751
AXAD
AXAD
AXAD
Thixotropic,
self-adhesive
Thixotropic,
self-adhesive
Flowing, adhesive
Fast cure, mechanical properties, fluid
resistance
Fast cure,
mechanical
properties,
injectable
Good adhesion
Adhesion on
Good adhesion on High Shore A
Fast cure, good
on plastic parts,
plastic parts, plastic parts, oil
Hardness
elongation, low
oil resistance
high elongation
resistance
modulus
Black
White-black-grey
Black
Ivory
Grey
Grey
Ivory
Alcoxy
Alcoxy
Oxime Low Meko
Acetoxy
Activated acetoxy
Activated acetoxy
Activated acetoxy
1.25
1.38
1.33
1.3
1.02 / 1.43
1.13 / 1.43
1.3 / 1.17
-
-
-
100 000
-
-
100 000 / thixo
140
30
120
-
80 / 180
100 / 180
-
1 mm
<3mm
<5mm
2 min
<1 mm / <5 mm
<5 mm / <5 mm
fluid / <5 mm
15
10
4
7
-
-
-
2.5
3
3.8
4
-
-
-
33
24
40
57
17
53
53
0.7
0.5
1
6.5
0.3
2.5
3.1
2.1
1.4
1.5
-
1.4
4.4
4.4
350
600
300
180
500
200
180
1.7
0.6
0.85
1.3
1.4
2.7
2.2
CF
CF
CF
AF
CF
CF CF
++++
++
++
++
+
++++
++
-60
-60
-70
-65
-50
-70
-65
185
180
200
250
200
220
225
220
200
250
300
225
275
250
6
12
12
18
18
18
18
(4) Thixo : BOEING S 7502, flowing : MIL S 880 2 D, NM 459
(5) Temp 23°C, relative humidity 50%
(6) ISO R 868, DIN 53505, ASTM D 2240, BS 903 (A7), NF T 46003, NM 471
sket
(CiPG):
(7) ISO 37 (H2), DIN 53504, ASTM D 412, BS 903 (A2), NF T 46002 (H2), NM 470
(8) Aluminium AG3 specimen, without primer, 1mm thick joint, NM 748
CF = Cohesive Failure
AF = Adhesive Failure
Flexible bonding:
CAF®
uT
he bead of product is laid by a robot on
uA
fter curing, CAF® products are transformed
one of the parts to be assembled.
in a flexible bonding which absorbs
significant differential dilatation between
2 substrates.
uT
he bead of CAF Axad cures quickly with
®
or without heating, the adhesion strength on
metal can be modulated as required.
uO
utstanding weatherability (UV, thermal,
chemical resistance).
uT
he complete curing for CAF Axad needs
®
30 minutes at 25°C and only 5 minutes at
60/80°C.
uC
ompression and cohesion of the gasket
provide a gas-tight seal. The mechanical
properties and the outstanding resistance
to hot fluids and gases enable successive
dismantling and assembly without deterioration
of the gasket.
uH
igh bonding performances on various
substrates.
FiPG
Formed-in-Place
CiPG
Cured-in-Place
Lubricating
BluesilTM
Pastes & greases
Paste 408
Corrosion,
Lubrication
water
repellency
Tranluscent to whitish
Specific gravity at 25°C Tap GreaseGrease 33Grease 44Grease 55
Lubrication
cold
temperature
Lubrication
hot
temperature
Rubber
swelling
Tranluscent
to whitish
Brown
Brown
Brown
1.01
1.00
1.03
1.05
1.00
(1)
Worked penetration (mm/10)
280
<260
280
260
280
(1)
Rested penetration (mm/10)
270
200
250
250
270
Main characteristics
Color
Physical
properties
PasteGreases
Thermal
properties
Exudation (%) (2)
<0.5
<8
<4
at 150°C
<2
at 150°C
<5
at 100°C
storage
Evaporation (%) (2)
<3
<3
<3
at 150°C
<4
at 150°C
<2.5
at 100°C
Drip point (°C) (3)
-
-
210
205
205
-40 to +200
-40 to +200
-70 to +180
-40 to +200
-65 to +175
Thermal conductivity
at 25°C (W/mK)
0.19
-
-
-
-
Shelf life from the
production date (months)
36
36
18
18
18
Service temperatures (°C)
(1) NF T 6012, ASTM D 217, DIN 51804
(2) after 24 h at 2000°C
(3) ASTM D 566
rotection & Lubrication
P
BluesilTM Pastes & Greases
uL
ubricating devices and vehicles parts exposed
to cold and hot conditions as well as harsh
conditions moisture, corrosive environment:
greases used for gearboxes, starter units, etc…
uL
ubricating various mechanisms: power
windows, power door lock mechanisms,
assemblies of mechanisms (plastic/plastic,
plastic/metal): plastics gears, pins used in
the vehicle.
Good Lubricating power in a wide range of
temperatures, improving resistance to oxidation
and corrosion, good wash-out resistance and
very high drip point makes Silicones Greases
unique for automotive applications.
Functions & applications
BluesilTM Pastes & greases
Resin
Application
POTTING
Removable
Heat tranfer
Electronic devices protection
v
v
v
Resistors, Heat emitting components, …
SEALING
Removable
Electronic boxes
CONFORMAL COATING
Protection
PCB coating
v
v
Res
in
Function
99 1
0
Pas
te 3
4
Pas
te 9
0
Pas
te B
4
Pas
te 4
31
Pastes
v
v
v
Conformal coating
Remarkable spreadability associated with excellent
thermal stability of BluesilTM Silicone resins make them
excellent candidates for protection of printed circuit
boards and electronics components. Outstanding
resistance to climatic and ageing agents also ensure long
term protection efficiency.
BLUESILTM ESA
CAF®
Fixture of PCB
Antivibrating dots on PCB
Electronic boxes sealing plastics/metal v
v
Lighting devices (Head Lamps, etc …)
(**) PCB = Printed Circuit Board
Bluestar Silicones France SAS
21, avenue Georges Pompidou
F-69486 Lyon Cedex 03 - France
Tel: +33 (0)4 72 13 19 00 - Fax: +33 (0)4 72 13 19 88
www.bluestarsilicones.com
(***) LED = Light-Emitting Diode
PEMACO - Photos: Bluestar Silicones - Thomasz Pietryszek
v
v
v
v
SIL 12 001 3-1OBE
v
v
v
v
v
Standard
(including fire
resistant)
(*) CPU = Central Processing Unit
00
CAF ®
v
v
v
v
v
v
v
Sealing &
Bonding
id
CAF ®
v
Standard
(including fire
resistant)
v
v
v
v
v
2 flu
CAF ®
Encapsulation
v
v
v
v
530
ESA
602
4A
&B
&B
725
2A
v
v
v
v
v
Electronic components
Circuit and terminal protection
Connectors
Soldered connections
v
v
v
v
v
RTV-1 PC
v
v
v
v
v
ESA
A&
ESA
7
250
244
CPU (*)
v
PCB (**)
v
Actuator
v
Sensor
v
Vibration damping CPU, Sensors, …
v
Optically clear
LED and lighting devices
v
Heat transfer
Resistors, Heat emitting components, …
Standard
(including fire
resistant)
Potting
Gel PA
B
B
A&
B
A&
233
ESA
7
Examples of application
ESA
7
FUNCTION
ESA
7
230
A
&B
RTV-2 PA
ox 2
0
CAF® & BluesilTM
Silicones Solutions
for On Board Electronics
Silicone materials ensure that electrical and sensitive
electronic components work in a safe and reliable
way. They are used in automotive, aerospace,
consumer electronics, solar, lighting with a wide
variety of functions: protection against environment,
bonding and sealing. Bluestar Silicones propose a
range of specific products for conformal coating,
potting, encapsulating, sealing, bonding and thermal
conduction.
Potting & Encapsulating
Bluestar Silicones offers a broad range of silicone
rubbers and gels within the range of CAF® RTV-1
and BluesilTM ESA RTV-2, which are recommended
in electronic applications to ensure mechanical
and environmental protection. Their acceptance
is due to several factors including their excellent
dielectric properties, mechanical strength, damping
properties, moisture resistance, excellent adhesion
properties, flame resistance or optical clarity.
Sealing & Bonding
Silicone materials are widely used in electronic
applications for bonding components and sealing
against environmental contaminants as they can
maintain their physical and electrical properties
over a wide range of temperature, moisture and
other harsh environments. Bluestar Silicones offers
a range of silicone adhesives with CAF® RTV-1 and
BluesilTM ESA RTV-2 which provide self-adhesion
to many metals, ceramic, glass and plastics. These
solutions are excellent candidates for assembly
applications on or near to sensitive electrical and
electronic components as they do not release any
corrosive by products.
benefits
BluesilTM esa
u Excellent deep-section cure with no released
by-products
u Primerless system designed to bond to most
plastics and metals
u Wide temperature stability range
u Reversion resistance
u Corrosion resistance
u Excellent dielectric properties
u Certain grades with thermal conductivity
u Wide range of hardnesses, from gels to 55 Shore A.
Bluestar
BluestarSilicones.
Silicones.Delivering
DeliveringYour
YourPotential.
Potential.
Bluestar
BluestarSilicones
SiliconesFrance
FranceSAS:
SAS:
21,
21,avenue
avenueGeorges
GeorgesPompidou
Pompidou- -69486
69486Lyon
Lyoncedex
cedex03
03- -Tel:
Tel:+33
+33(0)4
(0)472
7213
1319
1900
00- -Fax:
Fax:+33
+33(0)4
(0)472
7213
1319
1988
88- -www.bluestarsilicones.com
www.bluestarsilicones.com
BluesilTM ESA & CAF®
BLUESILTM ESA
RTV-2 PA
Process
Mechanical
properties
Dielectric
properties
Thermal
properties
Flame
retardancy
storage
ESA 7230 A&B
ESA 7233 A&B
ESA 7244 A&B
ESA 7250 A&B
ESA 7252 A&B 18
3.2
5 E-3
High adhesion
UL 94 V0 (3mm),
High adhesion
Optically clear,
UL 94 V0 (3.4mm);
Main characteristics
metal & plastics
high thermal
metal & plastics,
UL 94 HB (1mm)
good thermal
stability
FV1 (3mm)
conductivity
Translucent
Red
Blue
Transparent
Black
Color
1.0
1.1
1.25
1.02
1.4
Specific gravity at 25°C (1)
40,000
20,000
60,000
4,000
6,000
Viscosity (mPa.s) (2)
10:1
1:1
1:1
10:1
1:1
Ratio
16h
20 days
16h
4h
90min
Pot-life
1min 150°C
1h 150°C
1min 150°C
1h 150°C
5min 150°C
Cure temperature
nc
nc
nc
nc
nc
Extrusion (g/min) (3)
nc
nc
nc
nc
nc
Skin formation time (min) (4)
nc
nc
nc
nc
nc
Cured thickness after 24 h (mm) (4)
(5)
31
35
50
52
48
Shore A hardness for 6 mm thick section (points) nc
nc
nc
nc
nc
Penetration (1/10mm) (8)
(6)
3.2
5
5.5
6.2
2.3
Tensile strength (MPa)
8
10
16
4
5
Tear strength (kN/m) (7)
100% CF
100% CF glass
100% CF
100% CF glass
100% CF glass
Adhesion
metal, plastics, glass
metal, plastics, glass
Dielectric strength (kV/mm) (9)
Dielectric constant @ 1kHz (10)
Power factor @ 1kHz (10)
Volume resistivity (Ω.cm) (11)
Thermal conductivity @ 25°C (W/m.K)
Minimum service temperature (°C)
h (°C)
Maximum service temperature in continu, 1,000
Maximum service temperature in pic, 72 h (°C)
UL 94
19
2.7
1 E-3
20
3.3
1 E-3
19
2.9
3 E-3
20
2.7
1 E-3
1 E+15
0.17
-60
180
200
1 E+15
0.2
-60
250
300
1.5 E+15
0.4
-60
180
200
1 E+15
0.16
-70
180
200
HB
V0 Equivalent
V1 Equivalent
HB
V0
12
12
12
24
20
Shelf life from the production date (months)
8 E+13
0.42
-60
180
200
(1) ISO R 1183, DIN 53479, NM 703; (2) Brookfield NF T 76105, ASTM D 445; (3) NM 495 A 3 mm / 3 bars; (4) Temp 23°C, relative humidity 50%; (5) ISO R 868, DIN 53505, ASTM D 2240,
BS 903 (A7), NF T 46003, NM 471; (6) ISO R 37 (H2), DIN 53504, ASTM D 412, BS 903 (A2), NF T 46002 (H2), NM 470; (7) ASTM D 624 éprouvette A, NM 492; (8) DIN ISO 2137 (150g
hollow cone); (9) NFC 26225, ASTM D 419, IEC 60 243; (10) NFC 26230, ASTM D 150, IEC 60 250; (11) NFC 26215, ASTM D 257, IEC 60 093; nc: non concerned
Optically Clear Potting
High transparency in the UV-visible wavelength
associated with outstanding optical stability
make BluesilTM ESA 7250 A&B an excellent
candidate for encapsulation of a variety of LED
(Ligh Emitting Diodes) device designs. It’s optical
clarity and stable properties upon exposure to
heat and moisture make BluesilTM ESA 7250 A&B
an excellent choice for LED applications.
CAF®
Gel PA
ESA 6024 A&B
CAF® 530
CAF® 2 fluide
Self-adhesive,
High adhesion Self-levelling, high damping, metal & plastics, self-adhesive
low extractables, thixotropic,
gel type
low viscosity
non corrosive
Blue
White, black, grey
Translucent
0.97
1.3
1.0
1,300
nc
30,000
1:1
nc
nc
90min
nc
nc
24h 23°C
nc
nc
nc
130
nc
nc
15
12
nc
3.5
3
-
34
18
300
nc
nc
-
3.3
0.7
-
15
1.8
Tacky
100% CF
100% CF
metal, plastics, glass metal, plastics, glass
23
2.8
1 E-3
Thermal conduction
RTV-1 PC
Self-levelling,
self-adhesive,
20
2.9
1 E-3
23
2.8
1 E-3
2 E+15
0.3
-60
150
185
1 E+15
0.2
-50
150
250
1 E+15
-
-55
150
180
HB pending
HB
HB
HB Equivalent
24
12
10
10
BluesilTM
Paste & Resins
Specific gravity at 25°C
Worked penetration (mm/10) (1) Rested penetration (mm/10) (1) Exudation (%) (2)
Evaporation (%) (2)
Drip point (°C) (3)
Service temperatures (°C)
Thermal conductivity
@ 25°C (W/mK)
Dielectric strength (kV/mm) (4) Dielectric constant @ 1kHz (5) Power factor @ 1kHz (5)
Volume resistivity (Ω.cm) (6) Shelf life from the
production date (months)
Main
characteristics
Color
Physical
properties
Thermal
properties
Dielectric
properties
storage
Bluestar Silicones offer a range of BluesilTM
ESA RTV-2 elastomers and BluesilTM Pastes
providing:
Translucent
0.97
10,000
nc
nc
nc
nc
60
5.2
0
nc
0.64
Tacky
19
3.0
4 E-3
1 E+15
-40
150
180
Electronic components are generating more
and more heat. Miniaturization is increasing
the need for extracting this heat outside of the
electronic device.
CAF® ox 2000
u High heat conductivity;
u Very high heat stability;
u Exceptional resistance to ageing factors:
UV rays, ozone, corona effect, salt fog in
hot and wet conditions;
u Excellent fire resistance, low smoke
emissions, non toxicity
of residues.
HEATSINK
HEAT CONDUCTIVE SILICONE INTERFACE
ELECTRONIC COMPONENT
PRINTED CIRCUIT BOARD (PCB)
Pastes
Paste 4
Paste B431
Resin
Paste 90
Paste 340
Water Fluid potting
Potting
Thermal
repellency
conductive
Tranluscent Tranluscent
Tranluscent
White
to whitish
to whitish
to whitish
1.0
1.1
1.0
2.2
260
360
330
280
200
-
320
270
<6
-
<1
<1.5
<2
<3
<1
<1.5
-
-
>250
-
-40 to +200
-60 to +200
-50 to +200
-40 to +200
0.21
0.25
-
0.52
20
2.6
5 E-4
1 E13
36
20
2.6
2 E-3
1 E13
36
-
-
-
-
36
15
3.5
5 E-3
1 E13
18
Resin 991
Conformal
coating
Pale straw
yellow
1.03
Viscosity: 175 mm2/s
Dry matter content: 50%
nc
nc
nc
-20 to +200 *
nc
80
2.7 (100Hz)
1 E-3 (100Hz)
1 E14
12
(1) NF T 6012, ASTM D 217, DIN 51804; (2) after 24h at 200°C; (3) ASTM D 566; (4) NF C 26225 - ASTM D 419 - IEC 60 243; (5) NF C 26230 - ASTM D
150 - IEC 60 250; (6) NF C 26215 - ASTM D 257 - IEC 60 093; * these values are given for information; for others range of temperature we recommand
to realize some preliminary tests
Ten
2
1
0
Bluestar Silicones also offers a complete range
of additives allowing the improvement of the heat
stability of all master batches.
Tensile strengTH evolution after 7 days
MM 40 THT
MM 50 THT
MM 60 THT
275 °C
300 °C
EB (%)
250 °C
9
8
7
6
5
4
3
2
1
0
MM 70 THT
450
400
350
Elongation
at break evolution after 7 days
300
450
250
400
200
350
150
300
100
250
50
2000
150 MM 40 THT MM 50 THT MM 60 THT MM 70 THT
100
250 °C
275 °C
300 °C
50
0
MM 40 THT MM 50 THT MM 60 THT MM 70 THT
275 °C
300 °C
Shore A hardness evolution after 7 days
Hardness ShA
Hardness ShA
MM 40 THT MM 50 THT MM 60 THT MM 70 THT
MM 40 THT MM 50 THT MM 60 THT MM 70 THT
250 °C
275 °C
300 °C
250 °C
275 °C
300 °C
answering strict criteria in terms
of oil resistance, Bluestar Silicones
proposes:
u6
00 Serie especially designed for
90
automotive
applications.
90
Hardness ShA
Hardness ShA
250 °C
MM 50 THT
MM 60 THT
275 °C
300 °C
MM
THTcure
MM 60 THT
No50
post
MM 40 THT
MM 70 THT
MM 70 THT
MF 620 U
250 MF
°C 660 U*
275 °C
MF300
670°CU*
MF 680 U*
17
60
70
80
EB (%)
EB (%)
450
450
400
Shore A hardness
400
350
350
Generally,
the aggressiveness of the Tensile strength (MPa)
300
300 oils towards rubber increases Elongation at break (%)
engine
250
with250
temperature,
and espacially with
200
200
150
temperatures
higher than 100-120 °C.
150
100 150 °C, only silicones can Beyond
100
50
Shore A hardness
ensure
50 a sufficient sealing for automobile
0
Tensile strength (MPa)
gasketing.
0
MM 40 THT MM 50 THT MM 60 THT MM 70 THT
MM 40 THT MM 50 THT MM 60 THT MM
70 THT at break (%)
Elongation
250 °C
275 °C
300 °C
Swelling (%)
In order 250
to °C
manufacture
products
275 °C
300 °C
MM 40 THT
5.1
7
7.6
5.9
1,050
390
405
290
Properties after immersion for 70 h at 150 °C in ASTM 1 oil
MF 620 U
MF 660 U*
MF 670 U*
MF 680 U*
14
(-3)
58
68
80
(-2)
(-2)
0
4.2
(-17%)
6.2
(-11%)
6.8
(-11%)
4.8
(-18%)
1,045
(0)
330
(-15%)
320
(-21%)
210
(-28%)
+6
+6
+4
+4
+5
+5
+3
+3
Properties after immersion for 70 h at 150 °C in IRM 902 oil
MF 620 U
MF 660 U*
MF 670 U*
MF 680 U*
Shore A hardness
12
(-5)
54
(-6)
63
(-7)
76
(-4)
Tensile strength (MPa)
4.2
(22%)
6.8
(-3%)
6.7
(-5%)
5.1
(-14%)
Elongation at break (%)
970
(-8%)
360
(-8%)
350
(-14%)
225
(-22%)
Swelling (%)
+12
+12
+9
+9
+9
+9
+8
+8
Properties after immersion for 70 h at 150 °C in IRM 903 oil
MF 620 U
MF 660 U*
MF 670 U*
MF 680 U*
Shore A hardness
-
-
40
(-20)
46
(-24)
60
(-20)
Tensile strength (MPa)
-
-
4.6
(-34%)
6
(-21%)
4
(-32%)
Elongation at break (%)
-
-
300
(-24%)
310
(-24%)
215
(-25%)
-
+38
+38
+41
+41
+32
+32
MM 40 THT MM 50 THT MM 60 THT MM 70 THT
MM 40 THT MM 50 THT MM 60 THT MM
70 THT
Swelling (%)
-
250 °C
275 °C
300 °C
* With 5 parts of AD 720 additive
250 °C
275 °C
300 °C
Bluestar Silicones France SAS
21, avenue Georges Pompidou
F-69486 Lyon Cedex 03 - France
Tel: +33 (0)4 72 13 19 00 - Fax: +33 (0)4 72 13 19 88
www.bluestarsilicones.com
PEMACO - Photos: Bluestar Silicones - Thomasz Pietryszek
Oil resistance
90
80
70
60
90
50
80
40
70
30
60
20
50
10
400
30
20
10
0
SIL 12 001 3-1UTH
Tensile strength (MPa)
Tensile strength (MPa)
300 °C
EB (%)
In order to produce products answering strict criteria
in terms of heat resistance, Bluestar Silicones
developed a very high temperature resistance (THT)
range, which can resist until 300 °C without significant
deterioration of its properties.
80
80
70
70
60
60
50
50
40
40
30
30
20
20
10
10
0
0
275 °C
250 °C
Heat resistance
9
8
7
6
5
4
3
2
1
0
250 °C
Silicones Solutions
for Under the Hood Applications
Under the Hood Applications
Increasingly severe under-the-hood environments,
most notably high temperatures due primarily to
more and more parts being packed into a relatively
limited space and more aggressive fluids (synthesis
oil and cooling fluids) are the major factors in silicone
rubber choices.
benefits
BluesilTM HCR
These are the unique properties that make BluesilTM HCR the
best choice for “Under the Hood” applications:
u Excellent heat resistance
u Good oil and coolant resistance
uL
ow Compression Set
uH
igh dielectric strenght
uO
utstanding ageing and weathering
resistance
u E
asy processing (injectionmolding,
calendering, extrusion, etc...)
BluesilTM HCR are ideal solutions
to make hoses that:
uR
esist
the pressure while standing up to
continuous high temperatures
uW
ithstand
aggressive oils and coolants fluids
uR
educe
the transfer of noise and vibrations
between the mechanical parts
BluesilTM HCR are the material of choice
to produce CVJ boots that:
uM
aintain
flexibility over a wide range of
temperatures
uG
rease
resistant and keep the grease in place
uP
rotect
the CVJ from de-icing salts, water and dirt
coming from outside
BluesilTM HCR are the most suitable solutions
to realize spark plug boots and ignition set that:
uP
rovide
outstanding electrical insulation and
dielectric protection
uW
ithstand
harsh environment conditions (high/
low temperatures, moisture, contact with oils and
fuels)
uM
eet
the requirements for long lasting and
durable components
Bluestar
BluestarSilicones.
Silicones.Delivering
DeliveringYour
YourPotential.
Potential.
Bluestar
BluestarSilicones
SiliconesFrance
FranceSAS:
SAS:
21,
21,avenue
avenueGeorges
GeorgesPompidou
Pompidou- -69486
69486Lyon
Lyoncedex
cedex03
03- -Tel:
Tel:+33
+33(0)4
(0)472
7213
1319
1900
00- -Fax:
Fax:+33
+33(0)4
(0)472
7213
1319
1988
88- -www.bluestarsilicones.com
www.bluestarsilicones.com
Bluesil General purpose
TM
BluesilTM
SERIES 200
Calendering moulding
PROPERTIES
STANDARDS
No postcure / Low compression set /
High resiliency
Appearance
GENERAL
CHARACTERISTICS
Specific Gravity (G/CM3)
MF 240 U
MF 280 U
MF 940 U
Translucent
Creamy white
Translucent
1.09
1.36
1.11
200 °C
225 °C
225 °C
ISO R1183
Heat stability
Catalyst type
E
Catalyst content (parts)
L
0.9
Post cure
MECHANICAL
PROPERTIES
AFTER CURE
Excellent
0.6
No
E
L
1.25
0.6
4 hours at 200 ° C
E
L
1.25
0.6
4 hours at 200 ° C
Hardness, shore A
ASTM D 2240
46
42
79
81
46
42
Tensile strength (MPa)
ISO R37
8.5
7.6
7.3
7.6
7.8
9.1
Elongation at break (%)
ISO R37
450
475
165
170
515
650
Secant modulus
at 100 % elongation (MPa)
ASTM D 412
1.29
0.98
5.2
5.3
1
0.8
Tear strength (kN/m)
ASTM D 624 A
12
12
16
17
13
15
Compression set (%)
(22 h/177 °C/25 %)
ASTM D 395 B
17
8
31
10
27
20
Rebound resilience (%)
ISO 4662
68
64
52
48
61
48
Bluesil HCR Specialties
TM
BluesilTM HCR
SERIES 600
Moulding extrusion calendering
PROPERTIES
GENERAL
CHARACTERISTICS
STANDARDS
Appearance
Specific Gravity (G/CM )
3
Translucent elastomer / Excellent processing
properties / Good compromise between tear strength
and compression set
MF 620 U
MF 660 U
MF 670 U
MF 680 U
Translucent
Translucent
Translucent
Translucent
1.06
1.16
1.18
1.21
ISO R1183
Heat stability
200 °C
Catalyst type
Catalyst content (parts)
200 °C
220 °C
L
E
L
E
L
E
L
0.8
0.6
1.25
0.6
1.25
0.6
1.25
0.6
Post cure
MECHANICAL
PROPERTIES
AFTER CURE
200 °C
E
No
No
No
No
Hardness, shore A
ASTM D 2240
24
17
60
60
67
70
76
80
Tensile strength (MPa)
ISO R37
4.1
5.1
7.6
7.5
8
7.6
7.1
6.8
Elongation at break (%)
ISO R37
700
1,050
355
390
350
400
340
300
Secant modulus
at 100 % elongation (MPa)
ASTM D 412
0.46
0.37
2.1
2
2.5
2.4
2.9
3.2
Tear strength (kN/m)
ASTM D 624 A
7
7
17
18
17
18
15
17
Compression set (%)
(22 h/177 °C/25 %)
ASTM D 395 B
30
28
15
16
21
20
22
22
Rebound resilience (%)
ISO 4662
63
51
55
54
46
48
42
40
Bluestar Silicones
Mix & Fix Centers®
network
SERIES 900
Calendering extrusion moulding
In order to be closer to your needs,
Bluestar Silicones has specialized
formulation and packaging units: the Mix
& Fix Centers®
Specialized in heat curing silicone rubbers
(HCR), the Mix & Fix Centers® are located at the
center of major rubber and elastomer converter
regions. Besides selling master batches and
other products, these centers develop, within
extremely short lead times, products according
to your specifications and your equipments.
Translucent
compromise between resiliency compression set and tear strength
MF 950 U
MF 960 U
MF 970 USP
MF 980 U
Creamy white
Translucent
Translucent
Translucent
1.11
1.15
1.17
1.18
200 °C
200 °C
225 °C
200 °C
E
1.25
L
E
0.6
1.25
No
L
E
0.6
1.25
L
0.6
No
No
E
L
1.25
0.6
4 hours at 200 ° C
52
46
58
57
68
67
78
81
9.7
6.8
8.5
7.7
8.5
8.8
8
8.2
480
485
320
320
380
500
230
230
1.3
1
2.14
1.8
2.1
1.8
3.8
4.4
14
15
17
18
20
21
16
18
52
27
38
16
60
25
34
20
65
52
55
54
51
53
60
66
The BluesilTM HCR range can be
used to make up your own silicone
elastomer compound. Call your
Mix & Fix Center® to
> Propose batch formulations.
> Prepare samples.
> Deliver ready-to-use compounds in the
colors, presentation, and curing system
of your choice.
> Formulate compounds containing some
exclusive additives and catalysts (such as
platinum catalyst).
THT SERIES
HD SERIES
Moulding extrusion
Moulding
extrusion
calendering
Very high heat stability
Excellent compromise between
compression set and tear strength
Very good heat stability
MM 40 THT
MM 50 THT
MM 60 THT
MM 70 THT
MF 980 U
HD 1060
HD 1070
Creamy white
Creamy white
Creamy white
Creamy white
Translucent
Creamy white
Creamy white
1.09
1.13
1.16
1.19
1.18
1.18
1.18
250 °C
250 °C
E
L
E
L
E
L
E
L
E
L
L
L
1.25
0.6
1.25
0.6
1.25
0.6
1.25
0.6
1.25
0.6
0.6
0.6
4 hours at 200 ° C
4 hours at 200 ° C
300 °C
300 °C
4 hours at 200 ° C
300 °C
4 hours at 200 ° C
300 °C
4 hours at 200 ° C
200 °C
4 hours at 200 ° C
4 hours at 200 ° C
39
37
46
46
56
56
64
64
78
81
61
71
6.1
7.4
7.4
7.6
9.4
9.4
9.5
9.5
8
8.2
10.5
10.5
470
530
485
570
460
505
410
530
230
230
430
380
0.8
0.8
1
0.8
1.3
1.2
1.7
1.3
3.8
4.4
2.3
3.2
12
14
16
18
19
20
20
25
16
18
22
24
31
15
43
21
42
28
54
33
34
20
7
7
60
52
54
49
50
44
43
34
60
66
55
59
Silicones Solutions
for Silk-screening,
Varnishing & Impregnating
uC
ylinder head gasket is probably the most famous
gasket in an automotive engine, and it requires a
perfect reliability. BluesilTM Resins range has been
the standard for decades on impregnating and
varnishing fibrous Cylinder Head Gaskets.
uW
e have been involved during the last decade in
the technological breakthrough to the Multi-Layers
Steel (MLS) Cylinder Head Gaskets and BluesilTM
Resins as well as BluesilTM ESA RTV -2 ranges now
used.
uM
ore specifically, BluesilTM ESA RTV -2 range are
used for the shoulders applied using silk-screening
process and BluesilTM new UV curing Resins are
increasingly being used to varnish these new
generation of Cylinder Head Gaskets.
benefits
BluesilTM Resins & ESA
uH
igh thermal stability
uG
ood resistance to lubricating fluids
uP
ermanent release effects
u High adhesion
Bluestar
BluestarSilicones.
Silicones.Delivering
DeliveringYour
YourPotential.
Potential.
Bluestar
BluestarSilicones
SiliconesFrance
FranceSAS:
SAS:
21,
21,avenue
avenueGeorges
GeorgesPompidou
Pompidou- -69486
69486Lyon
Lyoncedex
cedex03
03- -Tel:
Tel:+33
+33(0)4
(0)472
7213
1319
1900
00- -Fax:
Fax:+33
+33(0)4
(0)472
7213
1319
1988
88- -www.bluestarsilicones.com
www.bluestarsilicones.com
BluesilTM Resins & ESA
Shoulder
Curing type
Grade
Solvent
Dry content
(%)
Viscosity
(mm2/s)
Curing
Catalyst
Koenig
hardness
Bath stability
Processing
Impregnating
Varnishing
Solvent free
Solvent based
Solvent free
Solvent based
Solvent free
PA
PC
-
PC
ESA
7244A&B
20 B
H 68
20 B
21385 A
21385 B
UV1 V350
-
Xylene
-
Xylene
-
-
-
100
83
100
83
100
100
95000/35000
700
25
700
4 000
8 500
10’ at
150°C
15’ at 170°C
-
15’ at
150°C
5’ to 10’ at 150°C
3 s at
0.04/0.07
J/cm2
ratio 1:1
Sic 15 or
Cata 11011
Titanate
Sic 15 or
Cata 11011
Cata 11091
Cata UV
211
50 ShA
40
>60
40
45
40
40
16 h
>8 h
~4h
>8 h
>15 d
>15 d
>8 d
Silkscreening
Immersion
Immersion
Roll
PA
UV
100
350
Roll
BluesilTM Resins
uB
luesilTM ESA 7244 A&B is solventless, quick
uR
esins are relatively low molecular weight
curing, self levelling, RTV-2 elastomer with good
thermal conductivity. Thanks to its low viscosity,
BluesilTM ESA 7244 A&B is easy to apply by silkscreening process, especially for cylinder head
gasket.
polymers with a three dimensional branchchained structure. They are available solventless
or diluted in solvent depending on the
customer process with 3 different curing type:
polycondensation, polyaddition or UV curing.
u After
polymerization, BluesilTM ESA 7244 A&B is
uA
fter polymerization, BluesilTM Resins produce
transformed into a flexible adhesive film which
is particularly resistant to cooling fluids and
engine lubricants. Moreover, the outstanding
resistance to high temperature ensures that the
product carries out its functions for a long time.
BluesilTM ESA 7244 A&B is intended for bonding
metal, engineering plastics and epoxy surface
in various automotive industry: cylinder head
gaskets, starters, alternators,…
an elastomeric coating with high adhesion on
many substrates, high engine fluids resistance
(lubricant, cooling liquid, etc…), outstanding
thermal stability up to 250°C and permanent
release effect. BluesilTM Resins offers high
performances for impregnating and varnishing
Cylinder Head Gaskets.
Bluestar Silicones France SAS
21, avenue Georges Pompidou
F-69486 Lyon Cedex 03 - France
Tel: +33 (0)4 72 13 19 00 - Fax: +33 (0)4 72 13 19 88
www.bluestarsilicones.com
SIL 12 001 3-1SV
BluesilTM ESA 7244 A&B
PEMACO - Photos: Bluestar Silicones - ArchMan
PC = polycondensation - PA = polyaddition - UV = UV cationic polymerization
Italy
Bluestar Siliconi Italia SpA
Via Archimede, 602
I - 21042 Caronno Pertusella (Va)
Tel. + 39 02 96 41 41
Fax + 39 02 964 50 209
Germany, Switzerland, Austria
Bluestar Silicones Germany GmbH
Borsigstrasse 1
D - 51381 Leverkusen
Tel. + 49 (0) 2171 91349 0
Fax + 49 (0) 2171 91349 10
An ongoing commitment to
safety, protection of health
and the environment
Having signed its name to the U.I.C.
(Chemical Industry’s Union) commitment
to progress, Bluestar Silicones is committed
to manufacturing its products and carrying out its
operations with a continuous focus on improving
safety and protecting health and the
environment.
A quality system certified
to NF EN ISO 9001 :
2000 and NF EN / AS 9100
standard
USA - Canada
Bluestar Silicones North America
Two Tower Center Blvd - Suite 1601
East Brunswick - NJ 08816 - 1100 - USA
Tel. + 1 732 227 2060
Fax +1 732 249 7000
Latin America
Bluestar Silicones Brasil Ltda
Av. Maria Coelho Aguiar, 215
Bloco G - 1° ANDAR - São Paulo - Brazil
CEP : 05804-902
Tel. + 55 11 37 47 78 87
Fax + 55 11 37 41 77 18
Hong Kong - Asia Pacific Regional Office
Bluestar Silicones Hong Kong Trading Co., Ltd
29/F, 88 Hing Fat Street
Causeway Bay, Hong Kong
Tel. + 852 3106 8200
Fax + 852 2979 0241
Spain, Portugal
Bluestar Siliconas España SA
C/Vic 3, Poligono Industrial La Florida
E - 08130 Santa Perpètua de Mogoda (Barcelona)
Tel. + 34 935 040 200
Fax + 34 935 608 049
China
Bluestar Silicones Shanghai Co., Ltd
3966 Jin Du Road
Xin Zhuang Industrial Zone
Shanghai 201108, China
Tel. + 86 (0)21 5442 6600
Fax + 86 (0)21 5442 3733
Norway, Sweden, Denmark
Bluestar Silicones Scandinavia A/S
Dronningensgate 6
N - 0152 Oslo
Tel. + 47 22 91 07 60
Fax + 47 22 91 07 64
Korea
Bluestar Silicones HK Trading Co., Ltd
Korea Branch 17/F, Kangnam Bldg., 1321-1,
Seocho Dong, Seocho Gu, Seoul, Korea
Tel. + 82 (0)2 3472 5137
Fax + 82 (0)2 3472 5007
Finland
Bluestar Silicones Finland OY
Eskolantie 1 A
FI - 00720 Helsinki
Tel. + 358 9 350 877 30
Fax + 358 9 350 877 17
Japan
Bluestar Silicones Hong Kong Trading Co., Ltd
Roppongi First Building, 1-9-9 Roppongi, Minato-Ku,
Tokyo, 106-8540, Japan
The information contained in this document is given in good faith and based on Bluestar Silicones current
knowledge. Bluestar Silicones makes no representation or warranty as to the accuracy, completeness
of such information or as to the compatibility of such information with the user’s intended application:
information is supplied on an “as-is” basis and is not binding on Bluestar Silicones. Nothing contained herein
is intended as a recommendation to use the products so as to infringe any patent. Bluestar Silicones assumes
no liability for users’ violation of patent or other rights and disclaims any liability for loss, injury or damage
which may result from the use of the products. Therefore, information contained herein must not be used as a
substitute for necessary prior tests which are the sole responsibility of the user and which alone can ensure
that a product is suitable for a given use.
Bluestar Silicones France SAS
21, avenue Georges Pompidou
F-69486 Lyon Cedex 03 - France
Tel: +33 (0)4 72 13 19 00 - Fax: +33 (0)4 72 13 19 88
www.bluestarsilicones.com
Pate de collage
PEMACO- Photos: Bluestar Silicones - Thomasz Pietryszek - Psycho - Andresr - DigitaLife
France, Belgium, Luxembourg, the Netherlands
Bluestar Silicones France SAS
Customer Service
55, rue des Frères Perret
F - 69192 Saint-Fons cedex
Tel. + 33 (0)4 72 73 71 00
Fax + 33 (0)4 72 73 76 58
United Kingdom, Ireland
Bluestar Silicones UK Ltd
Wolfe Mead, Farnham Road
Bordon, Hampshire GU35 0NH
Tel. + 44 14 20 477 000
Fax + 44 14 20 483 200
SIL 12 001 3-1
Commonwealth of Independant States (CIS),
Middle East, Eastern Europe, Africa
Bluestar Silicones France SAS
21, avenue Georges Pompidou
F - 69486 Lyon cedex 03
Tel. + 33 (0)4 72 13 19 00
Fax + 33 (0)4 72 13 19 88
All the names mentioned are registered trademarks.
Bluestar Silicones
throughout the world