752 Series
Dual-Tech Occupancy Sensor
The affordable sensor
Big
headline
that has every
placement
angle
covered.
depends on the image
752 Series
Dual-Tech Occupancy Sensor
Flush and surface-mount options included
Introducing the sensor that has
every angle covered. The innovative
Clipsal 752 Dual-Tech Occupancy Sensor
features both ultrasonic and passive
infrared (PIR) sensing technology, a 300W
LED load rating, the choice of either
flush or surface-mounting thanks to two
included bases, and an optional remote
control to make set-up and configuration
faster and easier.
Suitable for a wide range of commercial
indoor applications such as boardrooms,
meeting rooms, toilet/bathroom areas,
foyers/entry areas, hallways and offices;
the 752 Dual-Tech Occupancy Sensor
offers all of the features you need in one
affordable package.
Dual-Technology For
Best-In-Class Accuracy
The 752/CD1RC uses a combination of both
PIR and ultrasonic technology to provide
complete coverage. While PIR is good for
detecting people in line of sight, ultrasonic
does this even when sight is obstructed. A
combination of both ensures full coverage
by sensing minor and major movements,
while also screening out nuisance or
false triggering.
Dual-technology:
PIR and ultrasonic
Trim pot adjusters and
optional remote control
Significant Energy Savings
Clipsal’s 752 Dual-Tech Occupancy Sensor
is tested and approved to a 300W LED
load rating*. It allows lighting to only be
activated when presence is detected,
helping to substantially reduce energy
consumption and assist you in achieving
a 6-Star Energy Rating. When coupled
with LED lighting, even greater savings can
be made.
*Please refer to back page.
e a s y
i n st a l l a t i o n
Affordable remote
control option for
easier set-up and
configuration.
Remote control
(optional)
Dual-technology:
PIR and ultrasonic
Ultrasonic and PIR sensing technology
Features and Benefits
Superior accuracy and zero misses.
• Dual-technology (ultrasonic and passive
infrared) occupancy detection.
• 360° field of view.
Flexible and versatile application.
• Flush-mount or surface-mount
(two mounting bases included).
• Lux level setting: 10 - 1000 lux.
• 300W maximum LED load rating
(20 x Clipsal Gen3 LED drivers max.
or 8 x third party drivers max.)
• PIR zone mask provided.
• Auxiliary input for remote
manual operation.
Detection range
16m x 10m
LED load
rating 300W
• Common collector output for C-Bus
connection (L5504AUX).
Easy installation and configuration.
• Remote control option.
• Trim pot adjustment for all settings,
including sensitivity.
• Stylish white design discreetly blends
with surroundings.
Increased energy efficiency across a
wide range of applications.
• Light ON 5 sec. - 60 min. timer or
pulse output.
• Adjustable detection range of up to
16m x 10m.
• Adjustable timer, sensitivity and lux
level setting.
• Select PIR only, ultrasonic only, or both.
a n d
c o n f i g u r a t i o n
Versatility to suit a
broad range of
applications.
Surface-mount
(base included)
Flush-mount
(base included)
752 Series
Dual-Tech Occupancy Sensor
Technical specifications
240V~ ±10% 50/60Hz
Single Load Output
For lighting (with jumper wire):
incandescent lamp :max. 2000W
AC halogen lamp :max. 1000W
LV halogen lamp :max. 1000VA
fluorescent lamp :max. 900VA / 100μF (compensated)
LED lamp (externally ballasted): 300W max. (8 LED drivers max.)
energy saving lamps (includes CFL and PL lamps):
max. 80VA or 4 x 20VA lamps max.
For HVAC (remove jumper wire):
max. 10A for < 250VAC (cos φ =1)
max. 5A for < 30VDC
Wiring Configuration
3-wire design
Auto Off Time Adjustment
Adjustable from 5 sec. to 30 min. test and
Lux Adjustment
Adjustable from 10 lux to 1000 lux
ACC On / ACC Off Switch
Select “ON” for activating or select “OFF” for deactivating air current
compensation function
Triggering Method Selection
PIR + US, PIR only, US only, PIR or US
Detection Range (H=2.5m)
PIR: 360°, circular, adjustable up to φ8m
US: 360°, adjustable up to 10m x 16m (oval shape)
Environmental Protection
Class II, IP20
Operating Temperature
0°C to 45°C
Φ 111.5
FIG. 1
Φ 111.5
FIG. 2
Junction Box: Ф 111.5mm x 35mm
Φ 111.5
Φ 60
90
Rated Voltage
43.5
Specifications
35
Description
72
Technical Features
FIG. 3
Sensor Unit: Ф 111.5mm x 90mm
*Note: for LED loads, the 752/CD1RC can control a maximum of 20 x Clipsal Gen3 LED Drivers (300W max). If third party drivers are fitted only 8 x LED drivers
(max.) can be used due to inconsistent performance and quality. Clipsal Gen3 LED Drivers are high-performance, premium quality LED drivers, providing far greater
load capacity when used in conjunction with 752/CD1RC sensors.
Catalogue Number
Description
Warranty
752/CD1RC
Occupancy sensor, dual-technology, single-load, 360°,
ceiling-mount, with remote control option
752RC/D
Remote control for dual-technology occupancy sensors
The 752/CD1RC carries a two-year
warranty against manufacturing defects.
Detection Range
PIR Minor Motion
PIR Major Motion
Ultrasonic Minor Motion
Ultrasonic Major Motion
For more information about the Clipsal 752 Dual-Tech Occupany Sensor
contact your nearest Clipsal Representative, electrical wholesaler or visit clipsal.com
33-37 Port Wakefield Road, Gepps Cross
South Australia 5094
PO Box 132, Enfield Plaza,
South Australia 5085
National Customer Care Enquiries:
1300 2025 25
SEAU26311 September 2013
Website: clipsal.com
Contact us: clipsal.com/feedback
You can find this brochure and many others
online in PDF format at: clipsal.com
Follow the links off the home page or access
the following page directly:
clipsal.com/brochures
Schneider Electric (Australia) Pty Ltd reserves the right
to change specifications, modify designs and discontinue
items without incurring obligation and whilst every effort is
made to ensure that descriptions, specifications and other
information in this catalogue are correct, no warranty is
given in respect thereof and the company shall not be liable
for any error therein.
© 2013 Schneider Electric. All Rights Reserved.
Trademarks are owned by Schneider Electric Industries
SAS or its affiliated companies.
C4-017
Schneider Electric (Australia) Pty Ltd
This document has been printed using FSC Mix Certified paper.
ISO 14001 environmental management system in use at mill.
O/N 26311