STEINEL Lighting Controls
Occupancy Sensors, Presence Detectors, High Bay Controls,
Fixture Integrated Controls, Daylighting Controls
Control Pro Series of Presence Detectors
Precise detection definition
The Control Pro Series of presence detectors features passive infrared, ultrasonic and multitech
(PIR+Ultrasonic+Daylighting) sensor technologies. The control interfaces (load modules)
accommodate a variety of installation choices: The COM1-WR load module is the line voltage solution
ti
for 120/230/277VAC, 50/60Hz with integral force OFF photo control. The COM1-24 is the basic low voltage (18-24 VDC/VAC) load
module intended for use with a power pack or control panel. The COM2-24 load module offers all of the features of the COM1-24
version with the addition of special independently programed HVAC controls with normally open and normally closed contact
closures. The DIM-24 load module offers all of the features of the COM1-24 with the addition of 1-10V dimming controls for use with
0-10V dimming ballasts. The KNX interface module allows for direct use with the international standardized (ISO/IEC 14543-3) and
harmonized US Standard (ANSI/ASHRAE 135) network based communications protocol for intelligent buildings. The Steinel Control
Pro line is unsurpassed in performance with a wide range of application specific control strategies available. Whether a rest room,
classrooms, conference rooms, hallway or open office cubical space the Control Pro Series of presence detectors has a solution.
IS Series of Low Voltage Sensors
Ceiling and wall mount sensors with a variety of detection sizes
The high performance IS Series commercial occupancy sensors utilize pasive
infrared technology, with multiple pyro arrangements and unique lens design to provide up to 1416 switching zones.
The unique application specific detection patterns provides unprecedented coverage capabilities.
Wall Switch Sensors
Occupancy based control at the wall switch
The STEINEL family of Wall Switch sensors are available in Infrared, Ultrasonic and Multi-Tech versions. STEINEL’s commercial
switches feature all the sequence of operation settings that are needed for controlling a typical office or small conference room. The
new innovative “SwitchLink” feature provides true multi-way switching and the ability to expand coverage in the desired control zone.
DayLighting Controls
Light level controllers
The STEINEL NM 5000-2-24 daylighting controller is the ideal choice for controing site lighting
including signage and entryway lighting without the additional need for timed control. The controller
roller
measures ambient brightness and automatically switch lights ON at dusk and OFF as selected by the night economy mode. The
optional morning setting allows lights to turn on in the morning between approximately 4:00 and 5:00 am and remain on until the set
brightness level is achieved.
High Bay Occupancy Sensors
Standard and wireless high bay sensors
STEINEL’s HBS and RHB series of occupancy sensors provide world class detection in high and low bay applications. They utilizing
multiple Pyro configurations coupled with application specific lens designs that provide up to 1416 switching zones of detection. The
wireless communication option provides the ability to control multiple fixtures with out the need for rewiring and allows the ultimate
flexibility in creating a desired control zone.
Fixture Integrated Controls
Individual lighting fixture controls
STEINEL’s OEM fixture integrated sensors use PIR or High Frequency technologies with a built in daylight
feature. They provide occupancy and daylight control to be easily incorporated in a variety of fixture types for many applications. The
HF technology allows the sensor to be totally enclosed within the fixture. This is ideal for IP44 or greater fixture types.
RS
S PRO
Fixtures
The optional remote set up tool makes commissioning convenient with out having to open the fixture housing.
Ideal for a wide variety applications where the sensor needs to be incorporated in the design of the fixture. Eliminating
exposure to the elements and out of site of the general publics view.
Outdoor Sensors
Outdoor sensors for residential and commercial use
STEINEL’s wide range of outdoor sensors offer the highest level of reliability and
durability in harsh outdoor environments with a proven track record here in the USA. For over 15
5 years
we have been the choice of contractors, specifiers and facility managers who demand the best in outdoor
lighting controls. Models are available with and without lampholders and in configurations for either soffit or wall mount.
STEINEL Lighting Controls
STEINEL, a leading manufacturer of award-winning lighting controls
from Germany, brings a new and innovative line of controls to
North America. For specifiers, distributors, contractors or facility
managers looking for superior lighting control, these products bring
you a new level of quality, performance, and energy savings.
9051 Lyndale Avenue South
Bloomington, MN 55420
(800) 852-4343
www.steinel.net
M-21000-2
M-21000-1