Model FEB

advertisement
Project:
Type:
Catalog #:
Model FEB
Fluorescent AC/EM Unit
HOUSING
CODE COMPLIANCE
ELECTRICAL
WARRANTY
-- Sleek architectural design
-- Corrosion, flame and vandal resistant polycarbonate housing
-- Clear polycarbonate lens allows for greater light output
-- Can be wall or ceiling surface mount
-- Recessed mount kits available
-- Dual voltage 120/277VAC
-- Rated for use in damp locations
-- Solid state charging and switching
-- Brownout protection
-- Battery low voltage disconnect (LVD)
-- Overload and short circuit protection
-- AC power indicator and test switch
-- CSA Listed for Wet Locations
-- Meets UL Requirements
-- IP65 Rated
-- NFPA 101 Life Safety Code compliant
-- NEC and OSHA compliant
-- 5 year warranty
LAMPS
-- Supplied with a 24W compact fluorescent lamp (1800 lumens)
-- Operates at 1350 Lumens during in emergency mode
BATTERY
-- Maintenance-free NiCad battery
-- Standard battery will operate fixture for a minimum of 90 minutes
in the event of a power outage
-- Recharge time 24 hours
-- Nickel Metal Hydride also available
-- 10oC / 45oF - 40oC / 104oF
-- Self Diagnostics standard on all emergency units
MOUNTING
-- FEB-SU: Surface (Wall or Ceiling)
-- FEB-RC: Recessed Concrete (Wall or Ceiling)
-- FEB-RD: Recessed Drywall (Wall or Ceiling)
-- FEB-RT: Recessed T-Bar (Ceiling Only)
3.5"
ORDERING INFORMATION
MODELOPTIONS
FEB-SU
FEB-RC
FEB-RD
FEB-RT
NI - NiCad Battery
NM - Nickel Metal Hydride
BLK - Black
6.5"
17"
MODELOPTIONS
-
-
Specifications and dimensions subject to change without notice.
EELP • 2577 Neshaminy Interplex Dr. - KOR A, Suite 102 - Trevose, PA 19053 • Phone: 800-490-4496 • Fax: 877-634-6887 • www.eelp.net
FEB 072214
Self Diagnostics
- The functionality test, which is internally simulated weekly, is used to check all functions of the lamps over a one (1)
minute period.
- The emergency duration test, which is run every six (6) months, is used to check all functions of the lamps and battery
over a period of time equal to the emergency duration required under the relevant Code or Standard.
- Results of the tests are displayed by the multi-color LED located on the front panel of the FEB where it can be quickly
and easily read by maintenance personnel.
Flashing Red
Emergency Inhibited / Under Charge
Solid Red
Battery or Circuit Malfunction
Flashing Yellow
Test Active
Solid Yellow
Lamp Malfunctioning
Solid Green
Normal Operation
MH
=8
'
58
'
Ca
La lcula
tin
Ro bel
gS
om
um
_F
ma
loo
ry
r
Ca
Illu lcTyp
mi
na e
nc
e
Mounting Height: 8' Wall
Room Dimensions: 75'L x 8'W x 10'H
Fixture Spacing: 58'
Avg. FC: 2.34
MH
70
'
Un
FC its
Av
3.4 g
2
Ma
11 x
.2
Mi
n
0.1 Av
34 g/Min
.20
Ma
11 x/Mi
2.0 n
0
=8
'
Download