RS8SBi -T64
Subwoofer
Technical Information For System Engineers
Key Features:
! One 200mm (8”) polypropylene driver
with a 50mm (2”) voice coil diameter.
! ZeroReflection™ cast composite
enclosure for enhanced sonic
presentation and bass performance.
! Switchable dual input for either
4 Ohm or 70.7/100 Volt applications.
! Integrated hanging and safety cables for
easier & cleaner looking installs
! Fine black or white paint finish, custom
color enclosure available.
RS8SBi -T64 Subwoofer
System Type
8” ported (64 Watt transformer for 70.7/100 Volt
applications with 4 Ohm bypass)
Frequency Response (-3 dB)(1): 47 Hz – 120 Hz
Frequency Response (-6dB)(1):
40 Hz - 120 Hz
Low Frequency (-10 dB)(2):
33 Hz
Max Program Power:
250 W
Max Continuous Power RMS:
125 W
Max SPL dB @ 1m:
111 dB
Sensitivity dB @ 1w/1m(3):
90 dB
Impedance:
4 Ohm (nominal value)
Transformer Taps Selectable via barrier terminal strip.
70.7 V
Output
100 V
Output
64 W
108 dB
n/a
n/a
32 W
105 dB
64 W
108 dB
16 W
102 dB
32 W
105 dB
8W
99 dB
16 W
102 dB
Transducers
Low Frequency Driver:
1 x 200mm (8”) polypropylene cone, rubber surround
Crossover Frequency:
120 kHz
Network Type
Low Pass:
12 dB per octave, 2nd order
Inputs:
Corrosion resistant gold plated barrier strips
Enclosure:
Engineered glass-fiber reinforced composite
Color:
Black or white
Maximum Dimensions
Diameter:
316mm (12.43”)
Length:
405mm (15.95”)
Net Weight:
9.55 kg. (21.05 lbs)
Shipping Weight:
12kg. (27 lbs)
Accessories
Included:
Cosmetic end cap fitted over input panel
Optional:
See installation options on back page
1. Frequency response is measured in 4 Ohm mode.
2. Continuous Power rating is IEC-shaped pink noise with a 6 dB crest factor for 100 hours continuously.
3. 1 Watt input (2.0 Volts RMS @ 4 Ohms) at a distance of 1 meter.
SoundTube continually develops new product innovations and improvements. Updates to existing products
without prior notice are an example of SoundTube’s drive for constant improvement.
New Cast Composite Enclosure
SoundTube’s RSi Series cast composite
enclosure provides a low-resonance
platform with effective self-damping properties for a clean, tight sound. Compression
cast glass-fiber composite material coupled
with SoundTube’s patented ZeroReflection™ internal shaping provides extreme
stiffness and the elimination of internal
standing waves and external diffraction
distortions. The result is accurate sound
and tight bass in a high performance
commercial speaker.
Technical Data
SoundTube Entertainment strives to
provide complete and effective technical
information and data to dealers, engineers
and designers. All data are available from
SoundTube
Entertainment
or
at
www.soundtube.com.
Technical data and downloads include:
EASE™ data - 3D polar plots.
SoundTubeSPEC™ - proprietary
SoundTube speaker placement software.
Tech Sheets - technical information and
architectural specs for system engineers.
Data Acquisition
All performance data acquired at
SoundTube’s new Technical Measurement
Center (TMC) are analyzed using
standardized measurement techniques,
© 2002 SoundTube Entertainment, Inc., A David Wiener Ventures Company. All rights reserved. 01/08 251-H-6 REV 10
Specifications:
Applications
The RS8SBi is a low profile, high
performance subwoofer for background
and foreground applications providing
additional bass for all indoor open-ceiling
installations using RS55i, RS65i and
RS62i units.
including anechoic and Time Delay
Spectrometry
(TDS).
Performance,
development, and data acquisition tools
include: TEF20 Suite, CLIO, LMS, LEAP,
and proprietary modeling software. EASE
data is acquired through an automated
TEF20/Outline EASE interface system.
Data for Other SoundTube Products
Also available: sales & installation information
for all SoundTube speaker systems including
open-ceiling, in-ceiling, surface mount,
in-ground and sound-focusing speakers.
Subwoofer
Technical Information For System Engineers
Frequency Response
SPL, 1W, 1m (dB)
RS8SBi -T64
Frequency (Hz)
Frequency Response on-axis in full space (4π) at
(4Ω) setting.
Phase Response
Impedance Response
RS8SBi -T64
Subwoofer
Architectural Specifications
Technical Information For System Engineers
Installation Options
The loudspeaker shall consist of one 200mm (8”) low-frequency
transducer with a frequency dividing network installed in a dual
ported enclosure. The low frequency voice coil diameter shall be
50mm (2”).
Hanging Cable Kit
Performance specifications of a typical production unit shall
be as follows: Usable frequency response shall extend from
33 Hz - 120 Hz. The loudspeaker shall be available with a
switchable transformer/4 Ohm input, and shall be equipped
with corrosion resistant gold plated barrier strips for both
impedance modes. Taps shall be nominally 8W @ 70.7V (16W
@ 100V), 16W @ 70.7V (32W @ 100V), 32W @ 70.7V
(64W @ 100V), 64W @ 70.7V (tap position not used @
100V). The frequency-dividing network shall have a crossover
frequency of 120 Hz. Rated power capacity of the components and
network shall be at least 125 Watts continuous RMS power.
Wall Bracket
SoundTube’s hanging cable kit
incorporates hanging and safety
cables in an integrated system for
easier and cleaner looking installs.
SoundTube also provides a wall
bracket for fast and easy installation
of all RSi and HPi speakers on walls
or other vertical surfaces. Speakers
can be hung at 1, 8 or 20 feet below
the bracket.
The enclosure shall be constructed of a glass-fiber reinforced
composite for maximum performance. The grille shall be
constructed of heat resistant ABS plastic material.
Installation shall be by a single hanging aircraft cable with a 1/4-20
stud into threaded insert on rear input panel. A safety cable shall
be included as a seismic redundancy system. The external wiring
input connectors shall be barrier terminal strip and shall accept
from 16 to 22 gauge wire (or wire of any size using a blade terminal
input). Overall cabinet dimensions shall be no more than 316mm
(12.43”) in diameter, by 405mm (15.95”) in length, and weigh no
more than 9.55 kg (21.05 lbs).
Optional Accessories
Hanging Cable Kits 1, 8 & 20 feet in length, (HK1/HK8/HK20),
Hanging Cable Clamp (HCCL), Beam Clamp (BC1), Snap Link
(SL1), Forged Eye Bolt (FE1), Safety Cables 10 & 20 feet in length
(SC2-10/SC2-20) and Wall Bracket Kit (WB1).
The system shall be the SoundTube RS8SBi for both low and
high impedance.
405mm/15.95in
Technical data, EASE™ plots, SoundTubeSPEC™
software & product downloads available at
www.soundtube.com
316mm/12.43in
SoundTube Entertainment manufactures a complete line
of speakers for open-ceiling, in-ceiling, surface mount,
outdoor and sound-focusing applications.
RS8SBi -T64
Subwoofer
Technical Information For System Engineers
The RS8SBi Subwoofer is the perfect
compliment to SoundTube’s RS55i,
RS65i and RS62i speakers.
405mm/15.95in
270mm/10.62in
356mm/14in
441mm/17.38in
5.25” 2-way 32 Watt/8 Ohm system.
RS65i
RS62i
5.25” 2-way 32 Watt/8 Ohm
system.
5.25” 2-way 32 Watt/8 Ohm system.
To download tech sheets for all SoundTube products visit: www.soundtube.com
® ® E En nt te er rt ta ai in nmme en nt t I In nc c. . | |a add
S So ou un nd dT Tu ub be e
av
av
id
i dww
ie
ie
nn
ee
r rve
ve
nn
tu
tu
re
re
s scc
oo
m
m
pp
aa
ny
ny
6430
6430
N.N.
Business
Business
Park
Park
Loop,
Loop,
Park
Park
City
City
UT
UT
84098
84098
USA
USAp:p:
1.435.647.9555
1.435.647.9555f: f:
1.435.647.9666
1.435.647.9666e: e:
sales@SoundTube.com
sales@SoundTube.comw:w:
SoundTube.com
SoundTube.com