Lumascape Lighting Industries Pty Ltd
38-44 Enterprise Street, Cleveland, QLD 4163, Australia
Tel (07) 3286 2299 Fax (07) 3286 6599 Email sales@lumascape.com.au
LS363
20W METAL HALIDE
UPLIGHT LUMINAIRE
Lighting Designer
Fixture
Sources
MH CDM-TM (20W)
Features
LS363 - 227AD84XW21N1
20W CDM-TM, 30˚ beam angle, OptiClear lens,
polished stainless steel recessed cover
configuration depicted
TM
Integral ECG (HPF)
Ingress protection rating - IP68
Corrosion resistant 316 stainless steel - marine grade
Adjustable gimbal
Options
HumanTouch™ total temperature reduction technology
High optical transmission, toughened, max static load
- 1800kg
0m
m
Ø 187mm
OptiClear™
Ø
14
GripGlass™ slip resistant safety glass
Installation
- Direct burial
- Mounting collar (decks and grates)
- Pre-installation (concrete blockout and
drive-over)
360o
Ø 187mm
o
220mm
14mm
15
Adjustable
MH CDM-TM
Ø 142mm
Any luminaire can become hot – caution should always
be used in both appropriate use and placement
OPERATING TEMPERATURES
HumanTouch™ glass temperatures are measured in a controlled laboratory environment at an ambient temperature of 25ºC (77ºF), in still air, and
installed in a highly insular substrate. The inclusion of any accessory may vary glass temperature from those listed. Consult factory for details.
LS363
Source
Description
MH CDM-TM
Control Gear Optical System
WATTAGE
Location
Description
LENS
Integral
Adjustable
OptiClear™
HumanTouch™
Compatibility
20
4
GripGlass™
Borosilicate
4
Glass Temperature
Part number
<65ºC
<149ºF
--
70ºC
158ºF
--
<65ºC
<149ºF
--
4 Denotes Lumascape rates this product to meet the Lumascape HumanTouch™ standard. HumanTouch™ may need to be ordered separately.
HumanTouch™ can also be used to lower the glass temperatures in the other listed luminaires but not to the HumanTouch™ standard.
Lumascape will guarantee the following product groups from the date of purchase against faulty workmanship or materials as stated below and subject to the terms and conditions published in the Lumascape catalogue and at www.
lumascape.com.au. Architectural lighting product group - structural warranty: spotlights & floodlights - aluminium fixtures, 2 years; in ground - stainless steel fixtures, 10 years; underwater - stainless steel & brass fixtures, 5 years;
wall mount - stainless steel fixtures, 10 years; wall mount - aluminium fixtures, 2 years; wall mount - brass fixtures, 5 years; bollard & pathway - stainless steel fixtures, 10 years; down lights - aluminium fixtures, 2 years; landscape
lighting product group - structural warranty: copper fixtures, 10 years, aluminium fixtures, 2 years, electronic transformers, 12 months, magnetic transformers, 12 months, electrical warranty all product groups: 12 months.
LUMASCAPE
HEAD OFFICE - QLD
Tel (07) 3286 2299
Fax (07) 3286 6599
LUMASCAPE
SYDNEY - NSW
Tel (02) 9519 6860
Fax (02) 9519 8834
LUMASCAPE
MELBOURNE - VIC
Tel (03) 9686 1900
Fax (03) 9686 1700
www.lumascape.com
LUMASCAPE USA INC.
SAN FRANCISCO - CA
Tel 1-(650)-595-5862
Fax 1-(650) 595-5820
H.I. LIGHTING
LUMASCAPE AGENT - WA
Tel (08) 9321 5422
Fax (08) 9321 5881
LIGHTING PARTNERS AUSTRALIA
LUMASCAPE AGENT - SA
Tel (08) 8232 0074
Fax (08) 8232 0076
NQ LIGHTING
LUMASCAPE AGENT - NTH QLD
Tel (07) 4031 4490
Fax (07) 4031 5933
ECC LIGHTING
LUMASCAPE AGENT - NZ
Tel (09) 379 9680
Fax (09) 308 9328
LSPROM110 10/06/2008
OPTIONS / ACCESSORIES
Product Description
MH CDM-TM 20W; OptiClear™ lens; round flush stainless steel polished cover; single gland entry; 30˚ medium beam angle; 220mm direct burial body,
integral gear and side cable entry; 240V at 50Hz
LS363 - 227AD84XW21N1
23
Product Code
CODE
5
3
2
1
VOLTAGE
220
220
230
240
FREQUENCY
60Hz
50Hz
VOLTAGE
CODE
21
X
G
A
CABLE ENTRY
Examples...
DESCRIPTION
OptiClearTM Very high optical purity and load
strength
GripGlassTM OptiClearTM with slip reduction
glazing process
Borosilicate Ideal for general use areas
CODE
NOTE: Consult factory for other cable entry options.
Consult factory for LS644 mounting collar
for decks and grates.
(1) Not compatible with concrete blockout LS644-K.
(2) Use only with concrete blockout LS644-K, order separately.
Use ‘INSTALLATION TYPE’ code ‘23’.
(3) LS644-K required, order separately.
(4) LS644 required, order separately.
220mm
325mm
DEPTH
220mm
TYPE
Direct burial
Pre-installation
concrete blockout (3)
Mounting collar only (4)
CODE
81
84
85
LS6066
Prismatic lens
LENS
Square flush (1)
Surface trim
not recessed
292
Round flush
(1)
Select optical system from MR16 section
50 max
MR16
251
Select optical system from INC PAR section
INC PAR30 / 38
100 max
264
261
227
LS6065
Linear spreader lens
XV / XW / XX / XY
Select optical system from CFL section
CFL / TC-T
18
26
COVER
DESCRIPTION
Recessed (1)
Round flush (2)
to suit pre-install and
mounting collar
 LS6064-R Red
 LS6064-G Green
 LS6064-B Blue
 LS6064-Y Yellow
DESCRIPTION
Armoured cable and J-Box (1)
Single gland entry, MicroAntiLeachTM (1)
IP68 connector and J-Box (2)
Flood
MR16 optical section
Adjustable
LS6067
Concentric louvre
INSTALLATION TYPE & BODY DEPTH
140˚
XK
XL
CFL optical section
Fixed
Aluminium
LS6064
Dichroic colour filter
292
XL
XV / XW / XX / XY
NOTE: For HumanTouchTM temperatures refer to page 34.
(1) External accessory. Please use with recessed covers only.
Not suitable for use in traffic areas.
(2) For use with borosilicate glass lens types
(i.e. X lens code prefixes)
(3) For use with OptiClearTM and GripGlassTM lens types only
(i.e. A and G lens code prefixes).
LS6069
Slatted louvre
Surface trim
not recessed
(1) Not compatible with concrete blockout LS644-K.
(2) Use only with concrete blockout LS644-K, order separately.
Use ‘INSTALLATION TYPE’ code ‘23’.
LS6066
Prismatic lens
CODE
LS6065
Linear spreader lens
A
 LS6064-R Red
 LS6064-G Green
 LS6064-B Blue
 LS6064-Y Yellow
SOURCE
LS6064
Dichroic colour filter
(5) Not compatible with concrete blockout
LS644-K or mounting collar LS644.
(6) Remote transformer / ballast not
included - consult factory.
12º
30º
54º
74º
LS677
CFL glare shield
B
 LS694-R Red
 LS694-G Green
 LS694-B Blue
 LS694-Y Yellow
XS
LS694
Dichroic colour filter
OPTICAL SYSTEM
LS667
Frosted filter
DESCRIPTION REFLECTOR OUTPUT
MH Optical Section
Adjustable Aluminium Narrow
Medium
Flood
Wide Flood
LS6067
LS646 louvre
Concentric
Cross hatch louvre
DESCRIPTION
WATTAGE
Select optical system from MH section
MH CDM-TM
20 max
TM
TM
LS645 (1)
Brass grill
MATERIAL
FINISH CODE
Stainless steel Polished B
Brushed H
Brass
Polished E
Stainless steel Polished M
Brushed N
Brass
Polished L
Brushed K
Stainless steel Polished D
Brushed
I
Brass
Polished G
Stainless steel Polished U
Brushed V
Brass
Polished T
TM
81
LS6069
LS6016
(3)
Slatted
louvre
XK
TM
LS664 (2)
MH CDM-TM
Adjustable Aluminium
XV / XW / XX / XY
INC PAR optical section
Fixed
PAR30 / 38
CODE
21
LS645 (1)
Brass grill
XV
XW
XX
XY
CONTROL GEAR &
CABLE ENTRY LOCATION
N
LS645 (1)
Brass grill
CONTROL GEAR ENTRY
Integral
Side (5)
Bottom
Remote (6)
Side (5)
Bottom
CODE
N
Q
P
R
CFL / TC-T
Fixed Aluminium
XL
NOTE: For other options consult factory.
1
MH CDM-TM
Adjustable Aluminium
XV / XW / XX / XY
LS363
hield
Lumascape Lighting Industries Pty Ltd
38-44 Enterprise Street, Cleveland, QLD 4163, Australia
Tel (07) 3286 2299 Fax (07) 3286 6599 Email sales@lumascape.com.au
Lumascape will guarantee the following product groups from the date of purchase against faulty workmanship or materials as stated below and subject to the terms and conditions published in the Lumascape catalogue and at www.
lumascape.com.au. Architectural lighting product group - structural warranty: spotlights & floodlights - aluminium fixtures, 2 years; in ground - stainless steel fixtures, 10 years; underwater - stainless steel & brass fixtures, 5 years;
wall mount - stainless steel fixtures, 10 years; wall mount - aluminium fixtures, 2 years; wall mount - brass fixtures, 5 years; bollard & pathway - stainless steel fixtures, 10 years; down lights - aluminium fixtures, 2 years; landscape
lighting product group - structural warranty: copper fixtures, 10 years, aluminium fixtures, 2 years, electronic transformers, 12 months, magnetic transformers, 12 months, electrical warranty all product groups: 12 months.
LUMASCAPE
HEAD OFFICE - QLD
Tel (07) 3286 2299
Fax (07) 3286 6599
LUMASCAPE
SYDNEY - NSW
Tel (02) 9519 6860
Fax (02) 9519 8834
LUMASCAPE
MELBOURNE - VIC
Tel (03) 9686 1900
Fax (03) 9686 1700
www.lumascape.com
LUMASCAPE USA INC.
SAN FRANCISCO - CA
Tel 1-(650)-595-5862
Fax 1-(650) 595-5820
H.I. LIGHTING
LUMASCAPE AGENT - WA
Tel (08) 9321 5422
Fax (08) 9321 5881
LIGHTING PARTNERS AUSTRALIA
LUMASCAPE AGENT - SA
Tel (08) 8232 0074
Fax (08) 8232 0076
NQ LIGHTING
LUMASCAPE AGENT - NTH QLD
Tel (07) 4031 4490
Fax (07) 4031 5933
ECC LIGHTING
LUMASCAPE AGENT - NZ
Tel (09) 379 9680
Fax (09) 308 9328
LSPROM110 10/06/2008