Prospex® Axis Midi Trimless Gimbal downlight for Metal Halide Lamps 300-LS-TM-TL A range of single circular gimbal trimless downlights for use with CDM-Tm metal halide lamps, with long anti glare-snoot. Seperate die cast plaster in trim kit for seamless installation. Body and Gimbal finished either Black or White. Interior of the anti-glare snoot black as standard. Fully directional 35° tilt in both planes. Easy relamping with ball-catch mechanism for lamp body removal. Trim versions available. Muti trimless installation kits available. To specify beam angle use suffix -16 for 16°, -30 for 30°. Ref Number: 300-LS-TM-TL-WH 300-LS-TM-TL-BK Lamp quantity Lamp Lamp holder Lamp wattage Adjustable Aperture Overall dimension Overall height Required depth First fix requirement* Ceiling cut out Ceiling thickness Ingress protection** Dimming options*** Beam angle (specify) White (RAL 9016) Black (RAL 9005) 1 CDM-Tm PGJ-5 20-35w 35° 121mm Ø 127mm Ø 110mm 135mm MIN Yes 141mm Ø 25mm MAX IP20 None 16° or 30° Cut out 141mm Ø www.lucent-lighting.com *First Fix requirement. Luminaire comprised of fixture body and trimless installation kit, which is to be fitted to the ceiling before skimming. Ensure correct alignment of the installation kit before the ceiling is skimmed & final assembly (see luminaire installation instructions for details). **IP Rating. Tested from underside of the ceiling. ***Dimming. Whilst Lucent can offer the majority of its luminaires with various dimming options, it remains the responsibility of the specifier/installer to check and ensure compatibility of any control equipment used. Additional cabling may be required depending on the dimming protocol specified. It is the policy of Lucent Lighting to continually review and improve its products and therefore reserve the right to change any details of product or withdraw specifications without prior notice. Luminaires designed to comply with EN60598 and all other relevant Standards. This Specification Sheet supersedes all previous versions All intellectual property rights pertaining to the product described above and to this document are owned by or licensed to Lucent Lighting UK Ltd. We reserve our right to take whatever action is necessary to protect those intellectual property rights. Please notify Lucent Lighting Ltd of any inaccuracies immediately. E&OE Job/Project Name Area/Location Contact Lucent Lighting: e: info@lucent-lighting.com t: +44 (0)20 8442 0880 Fitting Ref Europe China Quantity Russia