®
Wiring Systems
HUBBELL® INSTALLATION EFFICIENCY GUIDE
Complete more projects in less time with Hubbell products
designed for enhanced productivity.
Time Savings on
New Construction
Reconfigurable
Renovations
Pre-Terminated
Systems
Efficient Operations in
Industrial MRO
New Construction
Constructing new facilities involves the
installation of many building systems,
involving several different trades
and complex logistics. Productivity
enhancements through labor savings
solutions allow contractors to complete
projects sooner, saving money and
keeping construction on schedule.
From SNAPConnect® devices with
snap-in modular connectors, to a wide
range of pre-wired, pre-manufactured
and easy-to-install solutions, Hubbell
has the products you need to complete
new construction projects in less time.
Page
SNAPConnect®.................................. 4
Pre-Wired Leaded Receptacles........ 5
Pre-Fab Building Wiring.................... 6
SystemOne Floor Boxes................... 8
X-END Plug-n-Play System............. 14
Wire Mesh Basket Tray.................... 15
Renovations
Whether it’s expanding a facility,
adding a wing, rearranging classrooms,
learning spaces, or upgrading systems
in an existing building, Hubbell has
the solution to enable fast, efficient
renovation and retrofit projects. Hubbell
Pre-Wired Raceway quickly and
efficiently deploys the latest power,
voice, data and multimedia applications
in existing buildings. The Connexion
Zone Distribution System allows for
reconfiguring raised-floor environments.
SNAPConnect devices make for efficient
device changeout and wireless sensors
are the perfect solution for locations
where rewiring may present a challenge.
Page
SNAPConnect®.................................. 4
Pre-Wired Raceway........................... 7
6-Inch and 8-Inch
Fire-Rated Poke Throughs................ 8
Zone Distribution............................... 9
Wireless Sensors............................. 10
X-END Plug-n-Play System............. 14
Wire Mesh Basket Tray.................... 15
2
For complete listing of Hubbell Products see our full line catalog.
www.hubbell-wiring.com
Data Center
Rapid data center deployment and
upgrades are essential to maintaining
network uptime and ongoing
communication for any business or
institution. Hubbell has designed
installation efficiency into its data center
solutions—from tools that reduce
termination time and cable management
systems with fully integrated features.
High performnace pre-terminated
fiber and copper cable assemblies are
custom configured to order and ready
to plug and play.
Page
iFRAME®..............................................11
Pre-Terminated Assemblies.................12
Fiber Connectors and Cassettes.........13
X-END Plug-n-Play System.................14
One Punch Tool...................................14
Wire Mesh Basket Tray........................15
Industrial MRO
Maximizing productivity and uptime
in manufacturing facilities requires
efficient maintenance, repair and
operation. Hubbell offers a wide
range of solutions that reduce the
need for repair, maximize uptime and
improve productivity—all while meeting
the safety and reliability needs of
harsh industrial environments. From
Linkosity® and MotorQuick® for fast
reconfiguring and replacement of
motors and machinery, to easy-toinstall manual motor solutions, Hubbell
keeps today’s assembly lines, products
and services operating efficiently.
Page
Circuit-Lock® Disconnect Switches....... 16
MotorQuick® and Linkosity®................ 16
Mechanical Interlocks......................... 17
Industrial Cord Reels........................... 18
PolyTuff® Non-Metallic Liquidtight....... 19
www.hubbell-wiring.com
For complete listing of Hubbell Products see our full line catalog.
3
SNAPConnect® Devices
SNAPConnect® Devices offer superior installation efficiency for new construction and
renovations, while delivering safe, reliable connections. Instead of conventional wiring methods,
SNAPConnect’s modular connector is installed during rough-in in leu of pigtails. Once the
walls are up, the protective covering is removed and the terminal is simply snapped into the
SNAPConnect device for a consistent connection every time. Once installed, SNAPConnect’s
modular design enables simple device change-out by maintenance personnel.
• Poly-bagged connector stays clean during construction
• Allows for circuit testing with standard test probes
• Low-profile, flush fit provides stylish appearance and more wiring room
• Eliminates exposed live parts for better safety
• Buy American compliant/U.S. Government Procurement (NA suffix)
• Tamper-resistant versions
Ordering Information
SNAPConnect®
Duplex Receptacles
15A 125V
NEMA 5-15R
20A 125V
NEMA 5-20R
Description
15A 125V
20A 125V
Description
15A, 120-277V AC
20A, 120-277V AC
Duplex, Finder Groove Face
Hospital Grade
Style Line® Decorator
Hospital Grade
Tamper-Resistant
Smooth Face
Hospital Grade
SNAP5262xx
SNAP8200xxA
SNAP2152xx
SNAP2172xxA
SNAP5362xxA
SNAP8300xxA
SNAP2162xxA
SNAP2182xxA
Single Pole
3-Way
SNAP1201xxNA
SNAP1203xxNA
SNAP1221xxNA
SNAP1223xxNA
SNAP5262xxTR
SNAP8200xxTR
SNAP5362xxTR
SNAP8300xxTR
Illuminated, Single Pole SNAP1201ILxxNA SNAP1221ILxxNA
Illuminated, 3-Way
SNAP1203ILxxNA SNAP1223ILxxNA
Pilot Light, Single Pole SNAP1201PLxxNA SNAP1221PLxxNA
SNAPConnect® Specification Grade Style Line®
Decorator Switches Buy American Compliant
SNAPConnect® Commercial Grade
GFCI Buy American Compliant
Description
15A 125V
20A 125V
Commercial Grade
Hospital Grade
Tamper/Weather Resistant
Hospital Grade
GFR15SNAPxxNA
GFR8200SNAPxxNA
GFTR15SNAPxxNA
GFTR8200SNAPxxNA
GFR20SNAPxxNA
GFR8300SNAPxxNA
GFTR20SNAPxxNA
GFTR8300SNAPxxNA
xx=colors: BK (Black) No Suffix (Brown), GY (Gray), I (Ivory), LA (Light Almond), R (Red)
and W (White).
Description
15A, 120-277V AC
20A, 120-277V AC
Single Pole
3-Way
Illuminated, Single Pole
Illuminated, 3-Way
Pilot Light, Single Pole
SNAP2101xxNA
SNAP2103xxNA
SNAP2101ILxxNA
SNAP2103ILxxNA
SNAP2101PLxxNA
SNAP2121xxNA
SNAP2123xxNA
SNAP2121ILxxNA
SNAP2123ILxxNA
SNAP2123PLxxNA
xx=colors: BK (Black) No Suffix (Brown), GY (Gray), I (Ivory), LA (Light Almond), R (Red)
and W (White).
SNAPConnect® Right Angle Pigtailed Connector for Use With
GFCIs and Receptacles
Clear right angle terminal with 6-inch leads #12 AWG
THHN/THWN-2, 600V wire
SNAPConnect® Right Angle Pigtailed Connector for Switches
Clear right angle terminal with 6-inch leads #12 AWG
THHN/THWN-2, 600V wire
Description
Solid Wire
Stranded Wire
Housing
Single Pole (3 Wires)
Single Pole with Pilot
3-Way (4 Wires)
SNAPSP1NA
SNAPSPP1NA
SNAP3W1NA
SNAPSP2NA
SNAPSPP2NA
SNAP3W2NA
Solid Wire
Connector for General Use SNAP1RA
Buy American Compliant
SNAP1RNA
4
SNAPConnect® Specification Grade
Toggle Switches Buy American Compliant
Stranded Wire
SNAP2RA
SNAP2RNA
For complete listing of Hubbell Products see our full line catalog.
www.hubbell-wiring.com
®
Pre-Wired/Leaded Wiring Devices
Wiring Device-Kellems
Hubbell’s Pre-Wired Devices are the perfect solution for those looking to improve installation
efficiency through pre-fabricated wiring or pre-assembled system components—significantly
reducing the on-site labor associated with the repetitious task of pre-cutting wire leads. Available
in several styles of receptacles and switches, Hubbell’s Pre-Wired Devices feature factoryinstalled 8-inch leads for consistent, anti-vibration terminations. Save time and money with
Pre-Wired Devices from Hubbell.
• Duplex and decorator styles available in a variety of colors
• Standard, tamper-resistant and weather-resistant GFCIs with LED
• Rocker, heavy-duty toggle, and illuminated switches available
• 8-Inch, factory-installed leads, #12 AWG solid or stranded wire
• Meets federal specification, UL and CSA requirements
Ordering Information
Pre-Wired Commercial Grade
Duplex Receptacles
Smooth Nylon Face; Self-Grounding
15A 125V
NEMA 5-15R
20A 125V
NEMA 5-20R
Hubbell-Pro™ Pre-Wired Heavy Duty
Toggle Switches
Description
15A 125V
20A 125V
Description
8" Solid wire leads
8" Stranded wire leads
Tamper-Resistant; 8" Solid wire leads
Tamper-Resistant; 8" Stranded wire leads
CR15xxP1
CR15xxP2
CR15xxTRP1
CR15xxTRP2
CR20xxP1
CR20xxP2
CR20xxTRP1
CR20xxTRP2
Single Pole
Double Pole
3-Way
4-Way
—
—
—
—
1221PWxx
1222PWxx
1223PWxx
1224PWxx
Pre-Wired Specification Grade
Toggle Switches
Pre-Wired Commercial Grade Decorator Receptacles
Smooth Nylon Face; Self-Grounding
Description
15A 125V
20A 125V
8" Solid wire leads
8" Stranded wire leads
Tamper-Resistant; 8" Solid wire leads
Tamper-Resistant; 8" Stranded wire leads
DR15xxP1
DR15xxP2
DR15xxTRP1
DR15xxTRP2
DR20xxP1
DR20xxP2
DR20xxTRP1
DR20xxTRP2
Description
15A, 120-277V AC 20A, 120-277V AC
Single Pole
Double Pole
3-Way
4-Way
CSL115xx
CSL215xx
CSL315xx
CSL415xx
CSL120xx
CSL220xx
CSL320xx
CSL420xx
Pre-Wired Specification Grade
Decorator Series Switches
Pre-Wired LED Heavy Duty GFCI Receptacles
Flush Nylon Face; Auto Grounding Clip
Description
Description
15A 125V
8" Solid wire leads
8" Stranded wire leads
Tamper/Weather Resistant;
8" Solid wire leads
Tamper/Weather Resistant;
8" Stranded wire leads
GF15xxLAP1
GF20xxLAP1
GF15xxLAP2
GF20xxLAP2
GF15TRxxLAP1 GF15TRxxLAP1
20A 125V
GF15TRxxLAP2 GF15TRxxLAP2
xx=CR/DR Receptacle colors: AL (Almond), BK (Black), No Suffix (Brown), GY (Gray), I (Ivory),
LA (Light Almond) and WHI (White). GFCI Available in GY (Gray), I (Ivory) and W (White).
Consult factory for additional colors.
www.hubbell-wiring.com
15A, 120-277V AC 20A, 120-277V AC
15A, 120-277V AC 20A, 120-277V AC
DSL115xx
DSL215xx
DSL315xx
DSL415xx
—
Illuminated, Single Pole
—
Illuminated, 3-Way
Single Pole
Double Pole
3-Way
4-Way
Pilot Light, Single Pole,
Red LED
—
DSL120xx
DSL220xx
DSL320xx
DSL420xx
DSL120xx
DSL320xx
DSL120PL
xx=Toggle/Rocker color: AL (Almond), BK (Black), No Suffix (Brown),
GY (Gray), I (Ivory), LA (Light Almond) and W (White). Illuminated available
in I (Ivory) and W (White) only.
For complete listing of Hubbell Products see our full line catalog.
5
Pre-Fabricated Wiring Systems
Rough-In Ready Pre-Fabricated Systems provide a comprehensive solution for delivering
installation efficiency. Available with universal mounting brackets, wiring device, plaster ring
and protection plate for outlets and conduit, these complete Rough-In Ready assemblies
are designed by technical experts to your specification with available numbered drawings for
ease of installation and a reduced construction schedule. Each universal mounting bracket
accommodates a wide range of wall depths and comes with an integral box attachment that
allows for field terminations without the need to reassemble the box and bracket.
• Significantly reduces construction schedule
• Pre-assembled design for maximum quality
• Inspector-ready acceptance
• Reduced packaging and job-site waste
• Matched to design criteria and specifications
Ordering Information
The Complete System
Rough-In Ready provides a UL listed,
prefabricated system, complete with wiring
devices, protection plates and MC-AP or MC
cables cut to length. Rough-In Ready will do the
take-off, supply the proposal, build your system,
and delivered on time. All systems come with
sequentially numbered assemblies and cables
that correspond to a detailed layout drawing
supplied by our own designers.
6
Pre-Fab Ready Assemblies
Rough-In Ready patented, UL listed components
can be pre-assembled to order, ready for either
cable or raceway. Our designers will determine
what you need from your project drawings, or you
can order your most common assemblies to have
them ready for multiple jobs. All assemblies that
come with a device installed include the patented
Secure-Trim™ adjustment ring to eliminate device
rock, and insure a flush finish with the wallplate.
UL Listed Components
All of our Pre-Fab components have unique, cost
saving features. All mounting brackets have a
built-in first means of cable support and far-side
supports adjustable from 2.5" to 6" deep. The
feature-rich Rough-In Ready components are
available for you to purchase for your own
pre-fab shop!
For complete listing of Hubbell Products see our full line catalog.
www.hubbell-wiring.com
®
Pre-Wired Raceway
Wiring Device-Kellems
Hubbell’s Pre-Wired Raceway Systems save time and money in new construction and retrofits.
Especially ideal for deploying power and data in existing buildings, pre-wired raceway is available
in aluminum, steel or non-metallic for a variety of applications. Each raceway system is precisely
measured, cut, wired, assembled and tested to your specification. Pre-wired raceway from
Hubbell can save up to 45% in labor over field installation, helping to keep on schedule and
budget, complete jobs faster, and save money.
Project Support and Documentation
• Dedicated local and factory support team
• Assistance defining bills of material and
quotes
• Factory engineer assigned to each project
Manufacturing and Testing
• Measured, cut, wired and assembled to
specification
• Wiring harnesses bundled and labeled for
easy identification
• Fully tested and 100% quality inspected
prior to kitting
Fast and Easy Installation
• Kitted, labeled and shipped by room, area
or floor
• Completely ready to install upon arrival to
job site
• Just secure to wall, make connections,
snap on covers and test
Ordering Information
Aluminum Pre-Wired
Raceway
Satin Anodized Finish.
Steel Pre-Wired
Raceway
Ivory or Gray Finish.
Description
Dimensions
Description
Dimensions
HBLALU3800 Series
Single Channel
A: 2.25" (57.15)
B: 3.00" (76.20)
HBL3000 Series
Single Channel
A: 1.53" (38.86)
B: 2.75" (69.85)
HBLALU4800 Series
Two Channel
A: 2.25" (57.15)
B: 6.00" (152.40)
HBL4750 Series
Single or 2 Channel
(with Divider)
A: 1.75" (44.45)
B: 4.75" (120.65)
HBLALU5000 Series
Two Channel
A: 1.75" (44.45)
B: 5.08" (129.03)
HBL6750 Series
2 Channel (w/1 divider)
3 Channel (w/2 dividers)
A: 2.22" (56.39)
B: 6.75" (171.45)
HBLALU7620 Series
Three Channel
A: 2.25" (57.15)
B: 7.62" (193.55)
Also Available UL Listed Modular Pre-Wired Raceway Systems
Featuring the Flexibility of LINKOSITY® Connections
Hubbell Pre-Wired Metal Raceway with LINKOSITY®
connections is a Hubbell innovation providing a flexible,
modular UL Listed System that allows users to relocate
furniture and equipment without the need to access the
internal wiring of the raceway. The inherent flexibility of this
system greatly reduces the cost of installation and future
end-user costs associated with re-configuring space.
www.hubbell-wiring.com
Non-Metallic Pre-Wired
Raceway
Office White Color.
Description
Dimensions
PB2 BaseTrak® Series
Single Channel
A: 1.63" (41.40)
B: 4.50" (114.30)
PS3 Super BaseTrak® Series,
Three Channel
A: 1.97" (50.04)B:
6.70" (170.18)
For complete listing of Hubbell Products see our full line catalog.
7
SystemOne Modular In-Floor System
Hubbell SystemOne has been expanded to include new 6-inch and 8-inch core hole versions.
Providing a consistent, attractive and functional solution for in-the-floor or through-the-floor
applications. Hubbell SystemOne is extremely easy to use in new construction and renovation
projects. The fire-rated poke-throughs include a “stepdown” feature, enabling wiring,
installation and removal from the floor above. Sub-plates that easily and efficiently install on
SystemOne fire-rated poke-throughs and floor boxes. The modularity of the system allows for
extremely economical upgrades and changes in renovation projects.
6-Inch and 8-Inch Core Hole
• Less core holes, more capacity
• Recessed connections
• Flush, durable low profile cover in brushed
brass plated, satin nickel plated, oil rubbed
bronze plated, brushed aluminum and
black powder coat
• Large variety of subplates to accommodate
various power and data configurations
4-Inch Core Hole/Floor Boxes
• Multi-service, multimedia and 4x4
applications
• Cast iron, stamped steel and non-metallic
floor boxes
• Easily installed and configurable
• Can be used with both floor boxes and
poke-throughs, maintaining a uniform
look throughout the facility
• Durable black, gray, brass, aluminum and
ivory powder coat finishes
Ordering Information
Hubbell SystemOne Flush
Fire-Rated Poke-Throughs
Hubbell SystemOne Recessed Fire-Rated Poke-Throughs
Multi-Service Floor Box, Round
PVC
S1PFB
Stamped Steel
S1SFB
Stamped Steel AV
S1SFBAV
Cast Iron
S1CFB
S1PFB
4-Inch Poke-Through, 1-Piece
AV
S1PT3IMxxx
Decorator
S1PTxxx
4x4
S1PT4X4xxx
Furniture Feed
S1PTFFxxx
S1SFB
xxx = Finish: AL (Aluminum), BL (Black), BRS (Brass)
and GY (Gray).
4-Inch Poke-Through Floor Fitting
2-Channel
S1PTFIT
4x4
S1PT4X4FIT
AV
S1PTAVFIT
4-Inch Covers
S1PT3IMAL
Description
Carpet
Tile
Cast aluminum
construction with
a durable powder
coat finish
S1CFCxxx
S1TFCxxx
For color options,
replace xxx with the
following suffixes:
xxx = Finish: AL (Aluminum), BL (Black), BRS (Brass) and
GY (Gray).
8
6-Inch Pre-Wired FRPT for Data/AV
(2) pre-wired 20A receptacles with 18" leads plus 2 decorator
openings including 2" EMT and ¾" EMT, (1) flange and
cover assembly
S1R6PTWZxxx
S1R6PTWZALU
6-Inch FRPT for Furniture Feed Applications
(1) 2" EMT, (1) ¾" EMT, (1) flange and cover assembly
S1R6PTFFxxx
6-Inch FRPT Fitting
6" through floor fitting including 2" EMT and ¾" EMT
S1R6PTWZxxx
8-Inch Pre-Wired FRPT for Data/AV
(4) pre-wired 20A receptacles with 18" leads plus 3 gangs
with 2" EMT for data and AV, (1) flange and cover assembly
S1R8PTZZ3xxx
8-Inch Pre-Wired FRPT for Power
(4) pre-wired 20A receptacles with 18" leads plus 2 gangs
with 2" EMT and 1" EMT (1) flange and cover assembly
S1R8PTZZ2xxx
S1R6PTFFALU
8-Inch FRPT Fitting
8" through floor fitting including 2" EMT for data and AV
S1R8PTFIT3
S1R8PTZZ3ALU
6-Inch and 8-Inch Covers
Cast aluminum cover with two large
hide-away egress doors
6-Inch
S1R6CVRxxx
8-Inch
S1R8CVRxxx
xxx = Finish: ALU (Brushed Aluminum), BLK (Black Powder Coat), BRS (Brushed Brass, Plated),
BRZ (Oil Rubbed Bronze, Plated) and NKL (Satin Nickel, Plated).
Sub-Plates
A large array of power, data and AV sub-plates are available for SystemOne Floor
Boxes and FRPTs. Consult local sales team or Hubbell website.
For complete listing of Hubbell Products see our full line catalog.
www.hubbell-wiring.com
®
Connexion Zone Distribution System
Wiring Device-Kellems
Hubbell’s UL listed Connexion Zone Distribution System is a modular wiring system with
plug-and-play installation that saves time and money when delivering power and data to
workstations in raised-floor applications, including new construction, office renovations,
retail outlets, educational facilities and network operation centers. The system features
pre-wired extender cables that create links between the distribution box and points of use,
carrying 8 conductors to every point in the zone. With Hubbell Connexion Zone Distribution
System, power and communications can be located where needed for efficient relocations
and upgrades.
• Factory assembled components for
extremely fast installation
• Fast and easy to reconfigure during
renovations
• All components are UL listed to UL183
• Distributes power to more than one
location from a single feed
• Offers the greatest degree of circuit
capacity
Ordering Information
Expandable Zone Distribution Boxes
Floor Boxes
Description
Catalog Number
Description
Catalog Number
4/2/2 System (2+2)
4/2/2 System (3+1)
3/3/2 System
PDCS42222
PDCS42231
PDCS332
4-Gang, deep;
metallic cover
AFB301xx
4-Gang, shallow;
metallic cover
AFB401xx
8-Gang, deep;
metallic cover
AFB501xx
4-Gang, deep;
non-metallic cover
HBLAFB101xx
3-Gang power and
1-gang low voltage
AFB801xx
Extender Cable
Female To Female
Catalog Number
4/2/2 System
3/3/2 System
EXT422yyFF8W
EXT332yyFF8W
yy = Length: 05 (5 ft.), 10 (10 ft.), 15 (15 ft.), 20 (20 ft.), 25 (25 ft.), and 30 (30 ft.).
Custom lengths are available upon request.
Cable Whip
Description
Male To Open
Female To Open
4/2/2 System, 15 in.
3/3/2 System, 15 in.
4/2/2 System, 5 ft.
3/3/2 System, 5 ft.
4/2/2 System, 15 ft.
3/3/2 System, 15 ft.
EXT42201MO8W
EXT33201MO8W
EXT42205MO8W
EXT33205MO8W
EXT42215MO8W
EXT33215MO8W
EXT42201FO8W
EXT33201FO8W
EXT42205FO8W
EXT33205FO8W
EXT42215FO8W
EXT33215FO8W
AFB301BK
HBLAFB101BK
xx = Cover color: BK (Black) and GNT (Gray)
AFB801GNT
Splitter Modules
Description
Catalog Number
4/2/2 System
3/3/2 System
SPLITTER422
SPLITTER332
Furniture Feed
Description
Catalog Number
4/2/2 System
3/2/2 System
FIJB422
FIJB332
www.hubbell-wiring.com
For complete listing of Hubbell Products see our full line catalog.
9
WL-Series Wireless Sensors and Controls
Hubbell’s WL-Series Wireless Sensors and Controls are the ideal solution for renovation
projects aimed at reducing energy consumption. These sensors use DSP Enhanced
passive infrared technology to detect movement of heat from people to turn lights on when
a room is occupied and off when vacant. The sensors wirelessly transmit commands to the
associated control devices, reducing the need for additional wiring for ease and speed of
installation and energy savings.
• Eliminates need to run extra wires
• Supports highly reconfigured spaces
• Complete projects quickly
• Helps manage energy consumption
Wireless Ceiling and
Wall Mount Sensors
Wireless
Wall Switches
Wireless Wall
Mount Sensor
Wireless
Daylight Sensor
Ordering Information
Wireless Wall Switches
Wireless Ceiling Mount Sensor
Description
Color
Ceiling mount 360° - 324-676 ft2 White
Catalog Number
Description
WLP450C
8A Lighting, 3A Fan (1/10 HP
Ivory
motor, 120V only), Spec Grade White
Electronic Switch 120–277V,
No Neutral Wire Required
Accessory Switch 120V
Ivory
White
Accessory Switch 277V
Ivory
White
Wireless Wall Mount Sensor
• Detection at longer distances is best when motion occurs
at right angles to the sensor.
• Multiple sensors can be used to extend coverage.
Description
Color
Catalog Number
Wall mount 180° - 3000 ft2
White
WLP3000W
Wireless Corner Mount Wall Sensor
• Detection at longer distances is best when motion occurs
at right angles to the sensor.
• Multiple sensors can be used to extend coverage.
• Corner mount bracket included.
Description
Color
Catalog Number
Corner mount - 90° - 2500 ft2
White
WLP2500W
Wireless Wall Mount Hallway Sensor
• Designed to mount at the end of a hallway with a clear view
down the length of a hall.
• Detection at longer distances is best when motion occurs
at right angles to the sensor.
• Multiple sensors can be used to extend coverage.
Description
Color
Catalog Number
Hallway - up to 150 linear ft
White
WLP150H
Color
Catalog Number
WLS1278I
WLS1278W
WLAS120I
WLAS120W
WLAS277I
WLAS277W
Compatible Transmitters: WLP series and WLDH sensors any Lutron Clear
Connect Enabled Sensor.
Wireless Control Unit
Description
Catalog Number
Wireless load control unit with
isolated relay
WLC316R
Compatible Transmitters: WLP series and WLDH sensors any Lutron Clear
Connect Enabled Sensor.
Wireless Daylight Sensor
Description
Color
Catalog Number
Daylight sensor 0–107,000
Lux (0-10,000 fc)
White
WLDH
Compatible Controls: WSL1278xx switch, WLC316R control unit, or any
Lutron Clear Connect Enabled Control Device.
Compatible Controls: WSL1278xx switch, WLC316R control unit, or any
Lutron Clear Connect Enabled Control Device.
10
For complete listing of Hubbell Products see our full line catalog.
www.hubbell-wiring.com
iFRAME® Network Hardware Management System
®
Wiring Device-Kellems
With less parts to order and assemble, Hubbell's iFRAME® network hardware management
system gets your data center and telecommunications rooms up and running faster. The
iFRAME® features strong I-beam columns that simply bolt to the floor every two feet, quickly
resulting in an EIA-310-E-Compliant rack to mount a full complement of network gear. With
integrated grounding and bonding, power distribution and cable management, the iFRAME®
system offers a total integrated solution. It is also designed to align with the raised floor and
dropped ceiling grid to further simplify installation.
• Significantly less parts to asssemble
provides 10-15% more rack space
• Aligns with floor and ceiling grid
• Easy to install—simply bolt to the floor
and install top plate
• Each additional column in the row
forms an EIA-310-D rack
• Covers hinge to both left and right for
ease of use
• Provides superior cable management
• 1400 lb load capacity
• Can be configured into a 4-post frame
for data center requirements
Ordering Information
iFRAME® Column
Contents: (1) iFRAME® column weldment, (1) bottom alignment installation aid and (1) iFRAME® top plate floor
template, (1) full height front cover with (4) heavy-duty floor anchor washers dual-acting hinges and (2) dualacting front cover hinges (not included in IS7E), (20) #12-24 x 5/8" dog point machine screws, (4) 4" gates
(Catalog No. VCG4) and washers, (12) snap-in-place cable routing spools, and (1) assembly hardware kit
Rack
Units
Height Inches (mm)
Overall
Width Rail Depth
In. (mm) In. (mm)
Usable
Overall Depth
In. (mm)
Hole Type
Color
Catalog Number
Use: Without Raised Floor
45
45
84" (2134)
84" (2134)
78.8" (2002) 5" (13)
78.8" (2002) 10" (25)
12-24 Threaded Black
12-24 Threaded Black
IS7
IS710
3" (8)
3" (8)
14.17" (360)
14.17" (360)
3" (8)
3" (8)
14.17" (360)
14.17" (360)
Square
Square
Black
Black
IS7M6
IS7M610
14.17" (360)
12-24 Threaded
Black
IS7E
Use: Square Holes with Cage Nuts
45
45
84" (2134)
84" (2134)
78.8" (2002)
78.8" (2002)
5" (13)
10" (25)
Use: As the Rear Columns in 4-Post Applications
45
84" (2134)
78.8" (2002)
5" (13)
3" (8)
Note: Order two columns for the first rack in a line, then order only one column for each additional rack.
Category 6A Rear Cable Management Kit
Contents: 12" W x 6' L ladder rack sticks (Catalog No. HLS0612B), 12" W x 24" L iFRAME® top ladder, 27" W x
24" L iFRAME® top ladder, wall mounting kit (Catalog No. HLX0612), T-splice kit (Catalog No. HLTK) and
mounting brackets
Color
Catalog Number
Black
ICKC
IS7
Shown: door open, door closed
Top Ladder Rack
Color
Ladder Dimensions
Stringer Dimensions
Catalog Number
Black
2" H x 12" W
1 1/2" x 3/8"
ICKL
www.hubbell-wiring.com
For complete listing of Hubbell Products see our full line catalog.
ICKL
11
BIDnet Pre-Terminated Trunk Assemblies
Hubbell’s Assemble-to-Order Cable Assembly Program delivers custom copper and fiber
assemblies with short lead times to help you get your data center up and running faster than
ever. Available in custom lengths, configurations and colors, in Category 5e or 6A, 25-pair,
or multi-configured fiber trunk cables, BIDnet Pre-Terminated Trunk Assemblies fit virtually
any data center or network application. With 70% less installation time and 100% factory
terminated and tested, BIDnet ensures installation efficiency, peace of mind and reduced
job-site waste.
• High performance, short lead time
• Custom lengths for reduced waste
and faster deployment
• Substantially reduces installation time
• 100% factory terminated and tested
for maximum reliability
• Labeled at each end for easy moves,
adds, and changes
Pre-Terminated Copper
Trunk Assemblies
• Less on-site packing waste
Pre-Terminated Fiber
Trunk Assemblies
Ordering Information
Copper Assemblies
Transition Assemblies
Lengths:
Legs:
Category:
Connection:
Cable:
UTP:
FTP:
Color:
Connectors: MTP female to LC or SC duplex
Fiber types: 50/OM3, 50/OM4, SM/OS2
Fiber strand count: 12, 24 and 48 fibers
Cable: plenum, riser, or LSZH
(armored or non-armored)
Polarity: TIA-568C.3, Type A,B or C
10’–295’
1, 4 and 6
5e, 6 and 6A
RJ45 jack; RJ45 plug; open end
Plenum, riser and LSZH
Category 5e; Category 6;
Category 6A
Category 6 (10G Base-T)
Blue and white
Jack to Open
Distribution Fan-Out Trunks and Pigtails
Jack to Plug
Connectors: LC, MSFP, keyed LC, SC, SC/APC, ST,
FC, FC/APC
Fiber types: 62/OM1, 50/OM2, 50/OM3, 50/OM4,
SM/OS2
Fiber strand count: 6, 12, 24, 48, 72, 96
Cable: plenum, riser, or LSZH
(armored or non-armored)
Fan-out: 2.0mm furcation tubing
Mesh Bundle Trunks
(2.0mm Duplex Zip Cord)
Jack to Jack
12
Connectors: LC, MSFP, keyed LC, SC, SC/APC,
ST, FC, FC/APC
Fiber types: 62/OM1, 50/OM2, 50/OM3, 50/OM4,
SM/OS2
Fiber strand count: 6, 12, 24, 48, 72, 96
Cable: plenum, riser, or LSZH
Outer sheath: polyester mesh
For complete listing of Hubbell Products see our full line catalog.
www.hubbell-wiring.com
®
MPO Cassettes and PROclick® Fiber Connections
Wiring Device-Kellems
Factory terminated with MPO multi-fiber fanouts, Hubbell Pre-Terminated MPO Optical
Cassettes snap easily into most Hubbell fiber patch panels, enclosures or cabinets.
MPO cassettes and cords provide a flexible, rapid deployment fiber infrastructure solution.
Available factory assembled MPO-to-MPO 12-fiber cables with attached pulling grip enable
easy pulls through pathways and conduit. For reliable fiber terminations in less than one
minute, Hubbell PROclick® Pre-Polished SC and LC Fiber Connectors feature a preinstalled cleaved fiber with an index-matching splice mechanism and a precision factory
pre-polished ferrule.
MPO Cassettes
• Compact design saves space
• Factory-terminated, 100% optically
tested for low-loss, reliable
performance
• Available in multimode and
singlemode with 10 Gig Ethernet
• SC, ST, LC and MT-RJ versions
available
ProClick FIber Connections
• Typically Terminates in less than
one minute
MPO Cassettes
• Precision low-loss factory polished
• No adhesives or field polishing required
• Proven fiber clamping method with
stable performance
• RoHS compliant and bulk packed in
recyclable boxes
ProClick Fiber
Connections
Ordering Information
MPO 12-Fiber Cassette
Fiber Type
Color
SC Duplex
ST-Style
LC Duplex 12F
LC Duplex 24F*
LC Quad 24F*
MT-RJ
50µm, OM2
50µm, OM3
50µm, OM4
62.5µm, OM1
SM, OS2
Black
Aqua
Aqua
Beige
Blue
OCSC50
OCSC50G
−
OCSC62
OCSCSM
OCST50
−
−
OCST62
OCSTSM
OCLC50
OCLC50G
OCLC50G4
OCLC62
OCLCSM
OCLCD50
OCLCD50G
OCLCD50G4
OCLCD62
OCLCDSM
OCLCQ50
OCLCQ50G
OCLCQ50G4
OCLCQ62
OCLCQSM
OCRJ50
OCRJ50G
−
OCRJ62
−
*24 fibers, 2-12 fiber MPO connectors in rear.
PROclick® LC Pre-Polished Connectors
PROclick® SC Pre-Polished Connectors
Fiber Type
Cable Type
Color
12 Pack**
Fiber Type
Cable Type
Color
12 Pack**
50μM, OM3
50μM, OM2
62.5μM, OM1
SM, OS2
900/250 μM
900/250 μM
900/250 μM
900/250 μM
Aqua
Black
Beige
Blue
FCLC900K50GM12
FCLC900K50M12
FCLC900K62M12
FCLC900KSM12
50μM, OM3
50μM, OM2
62.5μM, OM1
UPC SM, OS2
APC SM, OS2
900/250 μM
900/250 μM
900/250 μM
900/250 μM
900/250 μM
Aqua
Black
Beige
Blue
Green
FCSC900K50GM12
FCSC900K50M12
FCSC900K62M12
FCSC900KSM12
FCSC900KASM12
**Also available in 100 pack. To order, replace the 12 suffix with 100.
**Also available in 100 pack. To order, replace the 12 suffix with 100.
2Click® ST Pre-Polished Connectors
Fiber Type
Cable Type
Color
50μM, OM3
50μM, OM2
900/250 μM
900/250 μM
Aqua FCST50GM12
Black FCST50M12
12 Pack
62.5μM, OM1 900/250 μM
Beige FCST62M12
SM, OS2
Blue
900/250 μM
www.hubbell-wiring.com
FCSTSM12
Tools
Description
Fiber Cleaver
Fiber Cleaver
Catalog No.
OFCLV3
Single fiber multimode, cleave tool OFCLV3
Singlemode, tool kit with case
OFCLV5
Visual Fault Locator (ST, SC, LC)
For complete listing of Hubbell Products see our full line catalog.
OFVFLKT1
OFVFLKT1
13
X-END and One Punch Tool
Installation efficiency at the work area is critical in today’s facilities that can contain several
thousands of connections to support data, voice and AV applications. Hubbell's Plug-n-Play
X-End AV Solution uses pre-terminated assemblies and a locking connections that save
valuable installation and testing time. The patch cords and tails are easily swapped out as
requirements in horizontal cabling runs. For quick, efficient punching down all four pairs of
a voice/data jack, the Hubbell 1-Punch Tool saves valuable installation time over traditional
single-blade tools.
X-END Plug-n-Play
• Overmolded connections with locking
interface ensure mated connection
• Designed for minimal signal loss for
superior audio and video
• Support multiple applications and
connector configurations
• Plug-n-play design saves installation and
testing time
X-END Plug-n-Play
HDMI 110 UTP Extender
• Utilizes UTP cabling (Cable is already on site)
• Customize lengths on site (No pre-ordering
cable assemblies)
HDMI 110 UTP
Extender
• Integrates into all Hubbell workstation and
delivery products
One Punch Tool
• Reduces termination time by 75%
• Consistent, reliable termination every time
• Punches all 4 pairs and cuts off excess wire
in one punch
One Punch Tool
Ordering Information
1-Punch Tool for XCELERATOR Jacks
Hubbell iSTATION HDMI 110 UTP Extenders
Description
DC
110 UTP HDMI
extender (pair)
5 Volt 2 4-pair
Installation Decorator
ISFH110xx
Module
IMH1102xx
Catalog Number
TX4P6A
Description
Catalog Number
1-punch Ascent HJ tool with head,
blades and HXTA termination aid
1-punch XJ tool with head, blades and
HXTA termination aid
Hand termination aid "Jack Knuckles"
Xcelerator/Ascent
Snap-X termination puck (bag of 25)
Ascent termination puck (bag of 25)
Non-Plenum, 8-pin
Plenum, 8-pin
Non-Plenum, 8-pin, with 3.5mm
Plenum, 8-pin, with 3.5mm
VGA6yyBK
VGA6PyyBK
VGA36yyBK
VGA36PyyBK
1-Punch Tool for P6E and P6A Series
Patch Panels
xx = Color: BK (Black), EI (Electric Ivory), GY (Gray), OW (Office White), and
W (White).
AV Plug-n-Play X-END Horizontal Cable Runs, Male, Black
yy = Length: 15 (15 ft), 25 (25 ft), 35 (35 ft), 50 (50 ft), 75 (75 ft), and 100 (100 ft).
Contact Hubbell customer service for custom legths, minimum quantities and
lead times may apply.
TX4P
HXTA
HXTP25
HJTP6A25
Description
Catalog Number
Patch Panel tool with head and blades
TX4PP
Replacement heads and blades are available. Hubbell Xcelerator jacks are
compatible with Paladin Tools® "Jack Terminator" PA8111 termination tool.
HXTA
VGA Plug-n-Play
X-END Connections
14
Description
TX4P
Quantity
15-Pin (F) to 8-Pin (F)
Straight 180º Angled 45° Angled 90° 8" Tail
15-Pin (M) to 8-Pin (M)
8" Tail
Non-Plenum
Plenum
1-Pack
10-Pack
15S6P1
15S6P10
15M6P1
15M6P10
15A6P1 15N6P1 15T6P1
15A6P10 15N6P10 15T6P10
15MP6P1
15MP6P10
TX4PP
For complete listing of Hubbell Products see our full line catalog.
HXTP25
www.hubbell-wiring.com
®
NextFrame Cable Management
Wiring Device-Kellems
Hubbell’s NEXTFRAME family of Cable Management Products are the ideal solution for high
density cabling requirements in data centers and telecommunication rooms. From horizontal
and vertical cable managers, to ladder rack and basket tray, all NEXTFRAME cable
management products are designed to provide maximum installation efficiency. Horizontal
and vertical cable managers are extremely modular and snap easily together, while ladder
rack mounts easily to floors, walls, ceilings, racks and cabinets. For overhead or underfloor
applications, Hubbell Wire Mesh Basket Tray provides substantial cable capacities and an
economical cable solution.
Basket Tray:
• "Flat" style design significantly
reduces stress on cables laying in
bottom of tray
• Easy to install
Ladder Rack
• Field fabricated fittings
• Complete offering of supports,
splice hardware and accessories
• Available finishes: Pre-galvanized
Powder coat paint: Black and pewter
Stainless steel
Wire Basket Tray
Ordering Information
Ladder Rack Straight Section
Width
Inches (mm)
6 Foot (1829) Length
10 Foot (3048) Length
Black
Gray
Black
Gray
6" (152)
HLS0606B
HLS0606G
HLS1006B
HLS1006G
12" (305)
HLS0612B
HLS0612G
HLS1012B
HLS1012G
18" (457)
HLS0618B
HLS0618G
HLS1018B
HLS1018G
24" (610)
HLS0624B
HLS0624G
HLS1024B
HLS1024G
Width
Note: Please order straight sections in multiples of 10 pieces. Width = outside to outside dimensions.
Ceiling Support
Hubbell Basket Tray Catalog Numbers:
HBT — — — — (add suffix letter "S" for shaped/flat style wire design)
Depth Width
Available Depths (inches):
02
04
06
08
Available Widths (inches):
04
06
08
12
16
18
20
22
24
Standard finish is "pre-galvanized".
Add suffix "BK" for powder coated black paint finish.
For additional hardware and accessories contact Hubbell.
www.hubbell-wiring.com
Round Style
Shaped/Flat Style
Cross sectional view of cross wires.
Shaped cross wires have more
surface area and significantly reduces
pressure and strain on cables.
Depth
Width
Length
118" (3000)
For complete listing of Hubbell Products see our full line catalog.
Width Inches (mm)
Catalog Number
12" (305)
16" (406)
18" (457)
20" (508)
24" (610)
HBTWGSP12
HBTWGSP16
HBTWGSP18
HBTWGSP20
HBTWGSP24
Accessories
Description
Catalog Number
Splice kit
Corner splice
HBTSK
HBTCS
15
Circuit-Lock® Disconnect Switches, MotorQuick® and Linkosity®
When it comes to ensuring efficient maintenance, repair and operation for maximum
productivity in manufacturing facilities, Hubbell Industrial Solutions combine plug-and-play
connections with safety to ensure rapid and safe equipment replacements and simple
reconfigurations of machinery. Ideal for switching of PLCs and electronic drive systems,
Hubbell Circuit-Lock® Disconnect Switch features auxiliary contacts that are factory installed
and ready for wiring. MotorQuick®, quick disconnect switches are pre-wired to work with
the Linkosity® plug-n-play power distribution system, are reducing motor replacement time
by more than 60%.
Circuit-Lock® Disconnects
• UL listed as a motor controller and also "suitable
as a motor disconnect"
• Meets NEC line-of-sight requirements for
maximum safety
• Highly visible lockable handle meets OSHA
lockout/tagout regulations
• Type 4X enclosure is molded of rugged Valox® to
resist abuse, corrosion and enhance safety
Circuit-Lock®
Disconnects
Motor-Quick®
• Enables faster installation and replacement of motors
• Pre-wired with Linkosity® components
• Easily retrofits to existing hard-wired installations
using Linkosity®
Linkosity®
• Plug-n-play wiring with reconfigurable distribution
components. Fast installation for 20A and 30A
circuits up to 600V
• Labor-savings alternative to conventional wiring
• Cables are UL Type PC-ER with crush and impact
resistance for maximum safety
MotorQuick®
Linkosity®
Ordering Information
Power Components
Cables and Receptacles
20A, 30A up to 600V
Circuit-Lock®
Unfused Disconnect
Switches
Description
Catalog Number
30A disconnect switch
30A disconnect switch with
one HBLAC1 auxiliary contact
60A disconnect switch
60A disconnect switch with
one HBLAC1 auxiliary contact
100A disconnect switch
100A disconnect switch with
one HBLAC1 auxiliary contact
HBLDS3
HBLDS3AC
HBLDS6
HBLDS6AC
HBLDS10
HBLDS10AC
Device Type
Ratings
PH Double Ended Cable - Male/Female Straight
PM Male Single Ended Straight
PN Male Single Ended 90°
PF Female Single Ended Straight
PG Female Single Ended 90°
PQ Double Ended Cable with Female 90°
PR Double Ended Cable with Male 90°
PS Double Ended Cable with (2) 90° Connectors
RF Female Receptacle; ½" N.P.T. rear thread
RM Male Receptacle (Inlet); ½” N.P.T. rear thread
20 20A up to 600V
Wires Conductor Color** Length (ft.)
02 - PA
05 Green/Yellow;
Black (all others)
23 20A up to 600V
03 PB
Specialty construction
04 Green/Yellow
(Includes isolated ground 05 White
on 6 wire and 10AWG 06 Black (all others)
super neutral conductor
**other color
on 5 and 6 wire devices)
30 30A up to 600V
04 codes available
upon request
001
005
010
015
020
025
030
035
040
045
050
1'
5'
10'
15'
20'
25'
30'
35'
40'
45'
50'
Example Catalog Number: PH2306PB05
Auxiliary Contacts
for 30, 60 and
100A Switches
Description
Catalog Number
Auxiliary contacts, “break after HBLAC1
main break” 1 set of n/o and
n/c contacts
Auxiliary contacts, “break
HBLAC2
before main break”1 set of
n/o contacts
Type 1; 30A 3 Pole 600V AC
Description
with HBL1389D
(1) pre-wired LINKOSITY® female receptacle
HBL1389MQR
(load side)
5 ft. pre-wired LINKOSITY® female cable (load side) HBL1389MQ5
with HBLDS3
HBLDS3MQR
HBLDS3MQ5
(1) pre-wired LINKOSITY male receptacle (line side) HBL1389MQR2 HBLDS3MQR2
and (1) pre-wired LINKOSITY® female receptacle
(load side)
®
16
For complete listing of Hubbell Products see our full line catalog.
www.hubbell-wiring.com
®
Mechanical Interlocks
Wiring Device-Kellems
The NEC requires a separate disconnect means within sight of all motors. Hubbell's easyto-install Mechanical Interlock devices eliminate making or breaking the circuit under load,
are suitable as motor disconnects, and meet OSHA lockout/tagout regulations. The IEC
Mechanical Interlock is easy to install with a pre-wired pin and sleeve receptacle, adjustable
mounting feet and DIN rail mounted switch. The Insulgrip® Twist-Lock® Mechanical Interlock
Enclosure accepts any 20A or 30A Watertight Safety-Shroud Receptacle and provides a
simple, compact, low profile and watertight installation.
IEC Mechanical Interlocks
• Easy installation with multiple mounting
options and pre-wired receptacle
IEC Mechanical
Interlocks
• Eliminates making or breaking circuit
under load for safe connections
• Highly visible red handle complies with
OSHA lockout/tagout requirements
• Certified as a manual motor controller
and suitable as a disconnect
Insulgrip® Twist-Lock® Mechanical Interlock
• Heavy-duty internal frame bonds conduit
and all grounds
• Easily accepts auxiliary contacts for
various control circuit applications
Insulgrip® Twist-Lock®
Mechanical Interlock
• Offset premolded conduit entry protects
components and speeds installation by
making it easier to pull conductors
Ordering Information
Twist-Lock® Mechanical Interlock
IEC Watertight Pin and Sleeve
Rating Color Coded by Voltage Poles/Wires
20A
3Ø 480V
30A
3Ø 250V
30A
3Ø 480V
30A
3Ø 600V
30A
3ØY 277/480V
60A
3Ø 250V
60A
3ØY 120/208V
60A
3Ø 480V
60A
3Ø 600V
100A
250V
100A
3ØY 120/208V
100A
3Ø 480V
100A
3Ø 600V
Mechanical Interlock
3P 4W
HBL420MI7W
3P 4W
HBL430MI9W
3P 4W
HBL430MI7W
3P 4W
HBL430MI5W
4P 5W
HBL530MI7W
3P 4W
HBL460MI9W
4P 5W
HBL560MI9W
3P 4W
HBL460MI7W
3P 4W
HBL460MI5W
3P 4W
HBL4100MI9W
4P 5W
HBL5100MI9W
3P 4W
HBL4100MI7W
3P 4W
HBL4100MI5W
Description
Ratings
Mechanical Interlock
accommodates 20A or
30A Watertight SafetyShroud Twist-Lock
receptacles.
Amperage and voltage
HBLMITL
ratings will be determined by
the choice of the Watertight
Safety-Shroud Twist-Lock
selected. Supplied with ¾"
N.P.T. Hub.
Catalog Number
Accepts the following Watertight Safety-Shroud ®
Twist-Lock® Receptacles
Rating
Voltage AC
NEMA
Max HP Rating
Receptacle
Catalog Number
20 Amp
2 Pole, 3 Wire
120
208-240
277
120/240
240 3Ø
480 3Ø
120/208 3ØY
L5-20
L6-20
L7-20
L14-20
L15-20
L16-20
L21-20
1
2.5
3
2.5
5 (3@208V)
10
3
HBL2310SW
HBL2320SW
HBL2330SW
HBL2410SW
HBL2420SW
HBL2430SW
HBL2510SW
120
208-240
120/240
240 3Ø
480 3Ø
120/208 3ØY
277/480
347/600
L5-30
L6-30
L14-30
L15-30
L16-30
L21-30
L22-30
L23-30
1
3
3
7.5
15
7.5
7.5
7.5
HBL2610SW
HBL2620SW
HBL2710SW
HBL2720SW
HBL2730SW
HBL2810SW
HBL2820SW
HBL2830SW
20 Amp
3 Pole, 4 Wire
20 Amp
4 Pole, 5 Wire
30 Amp
2 Pole, 3 Wire
30 Amp
3 Pole, 4 Wire
30 Amp
4 Pole, 5 Wire
For mating plug, replace MI with P. Ex. HBL420MI7W (mechanical interlock)
to HBL420P7W (mating plug).
www.hubbell-wiring.com
For complete listing of Hubbell Products see our full line catalog.
17
Industrial Cord Reels
Ideal for quickly delivering power when and where it’s needed, Hubbell’s Industrial Cord
Reels eliminate unmanaged cords and cables that can cause trip hazards and or risk of
electric shock. They feature a plug-in 5 foot power cord that requires no electric wiring,
a multi-position guide arm to position the cable where it’s needed, and a positive-latch
mechanism to automatically maintain desired cord length. Available with a variety of
connector types and lighted lamp ends, the cord reels can be easily wall, ceiling or bench
mounted. An available pivot base provides a full 340° rotation.
• Provides safe, convenient power for demanding
industrial environments
• All steel construction can easily be ceiling, wall
or bench mounted
• Keeps cords organized, saving time and money
and improving safety
• Durable and corrosion resistant for long term
performance and savings
Industrial Cord Reels
• Available with LED, fluorescent or incandescent light
• Durable, corrosion resistant steel construction with
yellow powder coat finish
Lighted Cord Reels
Ordering Information
Industrial Power Cord Reels
Cable
Feet (m)
Cord End
HBL5269C 15A connector/ HBL5369C 20A connector
Cable Type
Weight
Lbs. (kg)
15A 125V
Catalog Number
20A 125V
Catalog Number
45 (13.7) 12/3 SJEO
23 (10.4)
HBL45123C
HBL45123C20
Portable duplex outlet box; gray duplex
45 (13.7) 12/3 SJEO
29 (13.2)
HBL45123R
HBL45123R20
Portable duplex outlet box; gray GFCI duplex
45 (13.7) 12/3 SJEO
29 (13.2)
HBL45123GF15
HBL45123GF20
HBL2313 20A connector
45 (13.7) 12/3 SJEO
23 (10.4)
Pivot Base 340° rotation
–
–
5 (2.3)
HBL45123TL20
HBL45123TL20
HBL340PB
Industrial Lighted Cord Reels, 50 Ft. (15.2m) - 16/3 AWG SJEO Cable
Cord End
Watts (Max)
Amps
Volts AC
Weight Lbs. (kg)
4+1
0.17
120
21 (9.5)
HBL50162LED
Fluorescent hand lamp
13
0.3
120
21 (9.5)
HBL50162FL
Incandescent hand lamp
100
0.8
125
21 (9.5)
HBL50163IN
Amps
Volts AC
Weight Lbs. (kg)
Catalog Number
LED hand lamp, with end light
Catalog Number
Note: Supplied with 5 ft. power supply cord with HBL5266C, 15A straight blade plug.
HBL50162LED
Accessories
Description
Pivot Base 340° rotation
–
–
–
5 (2.3)
HBL340PB
Replacement stop
–
–
–
.2 (.09)
HBL16BS
4+1
0.17
120
1 (.5)
HBL16LEDR
Replacement fluorescent hand lamp
13
0.3
120
1 (.5)
HBL16FLR
Replacement incandescent hand lamp
100
0.8
125
1 (.5)
HBL16INR
Replacement LED hand lamp
18
Watts (Max)
For complete listing of Hubbell Products see our full line catalog.
HBL340PB
www.hubbell-wiring.com
®
PolyTuff® Non-Metallic Liquidtight
Wiring Device-Kellems
Protecting electrical circuitry on the factory floor helps improve safety and prevents
mechanical damage to maintain ongoing operations. Used between disconnect switches
and equipment in industrial environments, Hubbell PolyTuff® Non-Metallic Conduit and
Fittings provide superior flexibility and outstanding corrosion resistance while offering fast
and easy installation. With a range of available conduit sizes, PolyTuff® can easily make
tight turns and includes a variety of straight and multi-angle, SwivelLok® Connectors.
• All non-metallic construction ends metal
fatigue and separation problems
• Cuts cleanly with a knife or PVC cutter
so there are no jagged edges
• Available with rigid PVC core PolyTuff® I
or flexible corrugated wall PolyTuff® II
PolyTuff® Non-Metallic
Liquidtight Conduit and Tubing
•SwivelLok® nylon two-piece swivel body
twists 0° to 90°
• Neoprene O-ring ensures liquidtight seal
at hub
• Non-integral ferule provides seal and
pullout protection
PolyTuff® Non-Metallic
Liquidtight Fittings
Ordering Information
PolyTuff I® Conduit and
PolyTuff II® Tubing
Trade Size
(metric designator) Feet (m)
PolyTuff I
Conduit
PolyTuff II
Tubing
Trade Size
(metric designator) Black
¼ (10)
³⁄₈ (12)
½ (16)
¾ (21)
1 (27)
1¼ (35)
1½ (41)
2 (53)
–
G1038
G1050
G1075
G1100
G1125
G1150
G1200
B2025
B2038
B2050
B2075
B2100
B2125
B2150
B2200
¼ (6)
³⁄₈ (9)
½ (13)
¾ (19)
1 (25)
1¼ (32)
100 (30.5)
100 (30.5)
100 (30.5)
100 (30.5)
100 (30.5)
100 (30.5)
50 (15.2)
50 (15.2)
½ (13)
¾ (19)
Catalog Number
(2) PS0509NGY, PS05GYKIT
6' G1050
(2) PS0759NGY, PS07GYKIT
6' G1075
www.hubbell-wiring.com
F20259
P0389NBK
P0509NBK
P0759NBK
P1009NBK
P1259NBK
Gray
–
P0389NGY
P0509NGY
P0759NGY
P1009NGY
P1259NGY
Trade Size
(metric designator) Black
¼ (6)
³⁄₈ (9)
½ (13)
¾ (19)
1 (25)
1¼ (32)
1½ (38)
2 (51)
F2025
P038NBKA
P050NBKA
P075NBKA
P100NBKA
P125NBK
P150NBK
P200NBK
Gray
–
P038NGYA
P050NGYA
P075NGYA
P100NGYA
P125NGY
P150NGY
P200NGY
SwivelLok® Multi-Position
with Male Non-Metallic
Liquidtight Fittings
SwivelLok®
Flexible Conduit Kit
Trade Size
Fitting and
(metric designator) Conduit Kit
Straight with Male
Non-Metallic Fittings
for Non-Metallic Conduit
Fixed 90°Fittings
for Non-Metallic Conduit
Trade Size
(metric designator) Black
³⁄₈ (9)
½ (13)
¾ (19)
1 (25)
PS0389NBK
PS0509NBK
PS0759NBK
PS1009NBK
Gray
PS0389NGY
PS0509NGY
PS0759NGY
PS1009NGY
For complete listing of Hubbell Products see our full line catalog.
19
HUBBELL® INSTALLATION EFFICIENCY
Wiring Device Solutions
Scan for more information on Hubbell's Product for
Installation Efficiency Solutions
Hubbell Application Guides
Hubbell Healthcare
Application Guide
Hubbell Energy Efficiency Solutions
Healthcare Brochure featuring
Hospital Grade Plugs,
Connectors, Receptacles
and more.
Hubbell Education
Application Guide
Education Application Guide
to assist education facility
managers and engineers in
identifying and deploying
wiring devices for power, data,
voice and multimedia in a
variety of education spaces
and applications.
Hubbell Safety
Brochure
Sensors
Reduce energy consumption in a wide
variety of commercial, residential and
industrial applications with Hubbell
lighting controls and sensors.
Hubbell’s sensors facilitate compliance
with the latest building codes and
standards, including ASHRAE/IESNA
90.1, CECs Title 24, and help obtain
LEED® points.
Hubbell has always been
focused on safety. That’s why
Hubbell products are designed
and developed to first provide
maximum safety against injury
and the potential dangers
of electricity.
Hubbell Data Center
Brochure
Data Center Solutions
Guide assists data center
professionals in identifying,
specifying and deploying
Hubbell Data Center Solutions
to improve space utilization,
reduce on-site labor, lower
start-up costs and ensure
a reliable network cabling
infrastructure.
®
Wiring Systems
Commercial Electric Vehicle
Charging Stations
PEP Stations (EVSEs) are exclusively
represented by Hubbell. EVSEs are
an ideal fit commercial property
electric vehicle charging requirements.
Their distinctive styling provides
property owners with a design that is
complimentary to building architecture
and supports a commitment to
reducing emissions.
Literature Support
Power Strips
Hubbell’s SpikeShield® Energy Saving
Surge Protective Devices (ESPS Series)
reduce power consumption by
eliminating phantom power draw of
unused electronics and appliances.
Hubbell offers an extensive
literature library for product
support. Downloadable PDFs
are available online at
www.hubbell-wiring.com
under the media tab.
Hubbell offers a complete offering of
power strips in a various levels of outlet
configurations and surge protection.
www.hubbell-wiring.com
www.hubbell-premise.com
Hubbell Wiring Device-Kellems
Hubbell Incorporated (Delaware)
40 Waterview Drive, Shelton, CT 06484
Phone (800) 288-6000 • FAX (800) 255-1031
Hubbell Premise Wiring
Hubbell Incorporated (Delaware)
23 Clara Drive, Suite 103, Mystic, CT 06355
Phone (800) 626-0005 • FAX (860) 535-8328
Printed in U.S.A. Specifications subject to change without notice. ® Registered trademark of Hubbell Incorporated. WLBVM006 9/12