NanoUSB2.1 Product Specification
Confidential
or
Proprietary
NanoUSB2.1
Product Specification
Version control table:
Version
1.0.0
Version
Date
01.09.2013
Author
A.Gomes
Modifications
File generation
1.0
NanoUSB2.1_Product_Specification_v1.0
Prints and Copies of this document are only for information if not stamped “Original”
Page 1 of 8
NanoUSB2.1 Product Specification
Confidential
or
Proprietary
1 Contents
Version control table:................................................................................................................................... 1
1
CONTENTS ............................................................................................................................................ 2
2
SPECIFICATIONS .................................................................................................................................. 3
2.1
HARDWARE ...................................................................................................................................... 3
2.2
FIRMWARE ........................................................................................................................................ 6
2.3
SOFTWARE ....................................................................................................................................... 6
2.4
MECHANICAL DIMENSIONS ............................................................................................................ 6
Version
1.0
NanoUSB2.1_Product_Specification_v1.0
Prints and Copies of this document are only for information if not stamped “Original”
Page 2 of 8
NanoUSB2.1 Product Specification
Confidential
or
Proprietary
2 Specifications
NanoUSB2 Basestation is a miniaturized FPGA – USB2.1 control board that is able to
deserialize and communicate with AWAIBAs NanEye sensor, and transfer the data via
USB2 to a host PC. The power supply is well stabilized and can be precisely and fast
tuned by a 12bit DAC between 1.8V and 2.4V in order to tune the total framerate between 44fps and 58fps.
Besides that the NanoUSB2.1 has a build in LED Driver for up to 4 LEDs in series controlled by a 12bit DAC.
Additionally the system has also 4 general purpose digital I/Os.
2.1
Hardware
Chipset:
Interface:
Memory:
FPGA Config.:
Power Supply:
LED supply:
Digital I/Os:
Version
XILINX Spartan FPGA XC3S500E-4CPG132C, Cypress FX-2 Chip
480 MBit USB 2.0
4 Mbit SPI Flash
via USB or optional JTAG (for debugging purpose only)
via USB 5V, typ 200mA max 500mA (dependent on LED load current)
12bit DAC, 50mA max @16V max, config. via USB with 12bit Register
4 I/Os, 3.3V LVTTL debounced
1.0
NanoUSB2.1_Product_Specification_v1.0
Prints and Copies of this document are only for information if not stamped “Original”
Page 3 of 8
NanoUSB2.1 Product Specification
Confidential
or
Proprietary
Connectors:
Connector USB: MiniUSB (including vias to directly connect a USB cable to the board
instead of a connector)
Connector NanEye + LEDs: 6 pin Header from SAMTEC dual row 6 pin TMM series
Connector Digital I/Os: 4x vias or optionally the connector for 4pin flat stripe.
NanoUSB2.1 OEM Version with NanEye Connector bottom and top side
Version
1.0
NanoUSB2.1_Product_Specification_v1.0
Prints and Copies of this document are only for information if not stamped “Original”
Page 4 of 8
NanoUSB2.1 Product Specification
Confidential
or
Proprietary
Pin description of NanoUSB2 Version in box
Version
1.0
NanoUSB2.1_Product_Specification_v1.0
Prints and Copies of this document are only for information if not stamped “Original”
Page 5 of 8
NanoUSB2.1 Product Specification
Confidential
or
Proprietary
2.2 Firmware
Actual NanEye Deserializer and communication Firmware (VHDL code) is updated and
the DAC for the LED driver will be integrated, and also handling of the I/Os.
2.3 Software
Viewer with access to all functions of the Sensor, the LED Driver and the Digital Inputs
including DLL to access via external Software, compatible with Windows 7™ Windows XP™
2.4
Mechanical Dimensions
Mechanical Dimensions: of the board is 30.4mm x 52mm:
Version
1.0
NanoUSB2.1_Product_Specification_v1.0
Prints and Copies of this document are only for information if not stamped “Original”
Page 6 of 8
NanoUSB2.1 Product Specification
Confidential
or
Proprietary
The dimensions of the NanoUSB housing are 58mm x 37mm x 14mm:
Version
1.0
NanoUSB2.1_Product_Specification_v1.0
Prints and Copies of this document are only for information if not stamped “Original”
Page 7 of 8
NanoUSB2.1 Product Specification
Confidential
or
Proprietary
End of Document
Version
1.0
NanoUSB2.1_Product_Specification_v1.0
Prints and Copies of this document are only for information if not stamped “Original”
Page 8 of 8