ASSEMBLY INSTRUCTIONS
ITEM# L-GZ238PST-11C
IMPORTANT:
Please read and follow all safety statements, warnings, assembly instructions, use and care directions before
attempting to assemble.
1. When installing and assembling your gazebo, it is recommended that 2 or more adults are involved.
2. Do not use the unit during an electrical storm, as there is a remote chance of getting struck by lightning.
3. Do not climb on top of the gazebo. Falling off the gazebo can result in serious injury, possibly even death.
4. Do not leave the gazebo assembled when there is a risk of high wind, as damage may occur to the
structure.
5. This package contains small items and plastic bags that should be kept away from children.
6. Ensure that all connectors & poles are firmly secured in position fully. It is important to do so before use so
as to avoid collapsing or damage to the item, which could result in injury.
7. WARNING: Keep flame and heat sources away from the gazebo fabric. The fabric may burn if it is exposed
to prolonged contact with a source of heat. The application of any foreign substance to the gazebo fabric may
render the flame-resistant properties ineffective.
8. WARNING: Please take down the gazebo during strong wind. The manufacturer or retailer is not liable for
any loss of the product or other items due to the failure to take down the gazebo during strong wind.
Tools required: Ladder and Screwdriver (not included) .
Parts List
Pole （1）
A1
2
Pole（2）
A2
2
Base
B
4
Base cover
C
4
Corner top beam
D
4
Small Top Connector
E
1
Big Top Connector
F
1
Small Top Pole
G
4
Long Screen
I
2
Short Screen
J
2
K
2
Support bar
L
4
Big Canopy
O
1
Small Canopy
P
1
Hook
H
1
Shelf
Hardware Pack 1
AA
BB
CC
DD
EE
Z
M6X15 Bolt
M6 Flat Washer
M6X20 Bolt
M6X35 Bolt
M6 Nut
M6 Wrench
8 PCS
40 PCS
16 PCS
8PCS
8 PCS
1 PCS
Fig.1: Attach Base Cover (C) to Pole A1（A2）,tighten Base (B) with PoOHA1（A2）by using Bolt ( AA ) and Flat
Washer(BB).
Fig.2: Attach the Long Screen (I) and Short Screen (J) to PoOH A1（A2）with Bolt (CC) and Flat Washer(BB)
Fig.3: Insert Corner top beam (D) into Big Top Connector (F), then attach Hook (H) into Big Top Connector (F).
Fig.4: Fix Corner top beam (D) to PoOH A1（A2）with Bolt( DD) and Flat Washer(BB).
Fig.5: Insert Small Top Pole (G) into Small Top Connector (E).
Fig.6: Put Big Canopy (O) onto the Big Top, do not fully spread, attach Small Top Pole (G) to Corner top
beam (D) by M6 X 35 Bolt (DD), M6 flat Washer (BB) and M6 Nut (EE).
Hardware Pack 2
AA
BB
FF
M6X15 Bolt
M6 Flat Washer
5X160MM 7” stake
8 PCS
8 PCS
8 PCS
Fig.7: Put Small Canopy (p), fully spread
Big Canopy (O), using the Velcro’s to fasten
it to the frame; fix Support Bar (L) to Shelf (K)
by using Bolt (AA) and Flat Washer (BB).
Important: Please do not return this product to the store. For technical assistance on assembly or replacement
parts. Please call Sunjoy Industries at 1-866-578-6569 from 8:00 am EST to 8:00 pm PST or fax the replacement
part form which is in the box to 1-740-283-3549 or Email customer.care@sunjoygroup.com for assistance.
Made in China
2016-4