Biometrics Certifications
UL Listings
Schlage Biometrics pursues applicable UL Listings for its products. Actual UL recognition is indicated by the label on the
product. To verify UL status recognition follow these steps:
1.
2.
3.
4.
Go to http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
Enter the company name (Recognition Systems Inc)
Click on “Search”
You will see the UL Listing for all HandReaders and a link to the certification
Compliance with US Federal Communications Commission (FCC)
Schlage HandReaders as required by FCC Rules and Regulations for Certification are certified that the electromagnetic
interference from the device is under limits approved by the FCC.
Click to view document
Compliance with European Union Directives (DoC)
Schlage HandReaders covered by European Union Directives are intended for sale and use within the European market and
are in conformance with the essential requirements of these directives:
•
•
Products specifically required to do so bear the CE marking per the relevant European Union Directives
A Declaration of Conformity (DoC) for Schlage HandReaders is available below
Click to view document
Compliance with Restriction of Hazardous Substances in Electrical and Electronic Equipment (RoHS2)
Schlage HandReaders comply with the Restriction of Hazardous Substances Directive which restricts the use of certain
hazardous substances in electrical and electronic equipment in the European Union.
Click to view document
Buy American Act Compliance
Schlage HandReaders comply with Buy American requirements imposed by the federal government through the Buy American
Act (BAA).
1.
2.
Go to http://us.allegion.com/IRSTDocs/Brochure/105123.pdf
Scroll to page 17 and 18 where you will find all BAA compliant HandReader products
©2014 Allegion
010153 Rev. 4/14
allegion.com/us
ELECTRO MAGNETIC TEST, INC.
1547 Plymouth Street, Mountain View, CA 94043 Tel: (650) 965-4000 Fax: (650) 965-3000
Statement of Compliance
Presented to
SCHLAGE-INGERSOLL RAND
The following model was tested and found to be fully compliant with:
 FCC Part 15 Class A
 ICES-003 Class A
 EN 55022 Class A
 EN 55024
 EN 61000-3-2 Class A & EN 61000-3-3
F-SERIES HAND READERS
M/N: 01000-7311
Tested at Electro Magnetic Test, Inc. on
September 30, October 1, and 4, 2010
Certificate Number: 17516
__
Kevin Bothmann
Lab Manager
Jay Gandhi
President
Schlage
3899 Hancock Expressway
Security, CO USA
Office 877.671.7011
Fax1.800.452.0665
allegion.com
Declaration of Conformity
We
Schlage Biometrics
Allegion
2380 Owen Street
Santa Clara, CA 95054
Declare under sole responsibility that the product:
Information Technology Equipment
Product Name:
F-Series HandReaders
Model Number:
HK-II and HP-3000
Ref. Report#: EMT CE Report Number
#M110525S1 – Safety
#M101004B1 – EMI/EMC
is in conformity with the essential requirements of EU directives:
2004/108/EC
2006/95/EC
93/68/EEC
by applying the following standards:
EN 55022 Class A
EN 55024
EN 61000-3-2 Class A
EN 61000-3-3
EN 60950-1 2nd edition 2006
FCC Part 15 Class A
IEC 60950-1:2005
ICES-003 Class A
The CE Mark is affixed beginning in 2011.
The Production and Manufacturing facilities for Schlage Biometrics products are located in
Security, Colorado. The HK-II and HP-3000 is representative of the F-Series HandReader
family.
Place: Santa Clara, CA
Date: April 22, 2014
Signature:
Full Name: Albert Kato
Title: QA/System Test Engineer
Recognition Systems
Schlage Biometrics
2380 Owen Street
Santa Clara, CA 95054
Tel (408) 645-3666
Certificate of RoHS2 Compliance for HandReader Models
This statement clarifies the following Recognition Systems’ products are to the best of its
knowledge compliant with the European Union’s Restrictions of Hazardous Substances
Directive 2002/95/EC, WEEE 2002/96/EC, as well as the recast Directive 2011/65/EU.
Part Number
Description
HK-CR
HK-II
HP-1000
HP-1000-E
HP-1000-E-XL
HP-1000-XL
HP-2000
HP-2000-XL
HP-3000
HP-3000-E
HP-3000-E-XL
HP-4000
HandKey CR F-Series with memory for 512 users
HandKey F-Series with memory for 512 users
HandPunch 1000 with memory for 50 users
HandPunch 1000 with Ethernet, memory for 100 users
Break Compliant HandPunch 1000 with Ethernet, memory for 100 users
Break Compliant HandPunch 1000 with memory for 50 users
HandPunch 2000 with memory for 512 users
Break Compliant HandPunch 2000 with memory for 512 users
HandPunch 3000 with memory for 512 users
HandPunch 3000 with Ethernet, memory for 512 users
Break Compliant HandPunch 3000 with Ethernet, memory for 530 users
HandPunch 4000 with memory for 530 users
Under the RoHS directive outlined in Annex II (page L174/100) the manufacturing process for the
above listed parts to do not contain any of the six hazardous and restricted substances with maximum
concentration values tolerated by weight to homogeneous materials.
They are:
1) Lead (0.1%)
2) Mercury (0.1%)
3) Cadmium (0.01%)
4) Hexavalent chromium (0.1%)
5) Polybrominated biphenyls (0.1%)
6) Polybrominated diphenyl ethers (PBDE) (0.1%)
Bonnie Hunter
Bonnie Hunter
Product Manager
December 18, 2013