TLE2071, TLE2071A, TLE2071Y
EXCALIBUR LOW-NOISE HIGH-SPEED
JFET-INPUT OPERATIONAL AMPLIFIERS
SLOS119A – JUNE 1993 – REVISED AUGUST 1994
•
•
•
•
•
•
•
•
40 -V/µs Slew Rate Typ
Low Noise
17 nV/√Hz Max at f = 10 kHz
11.6 nV/√Hz Typ at f = 10 kHz
High Gain-Bandwidth Product . . . 10 MHz
± 30 -mA Minimum Short-Circuit Output
Current
Wide Supply Range . . . ± ± Input Range Includes the Positive Supply
Macromodel Included
Fast Settling Time Using 10-V Step
400 ns to 10 mV Typ
1.5 µs to 1 mV Typ
EQUIVALENT INPUT NOISE VOLTAGE
vs
FREQUENCY
GAIN-BANDWIDTH PRODUCT
vs
FREE-AIR TEMPERATURE
50
45
40
Gain-Bandwidth Product – MHz
V n – Equivalent Input Noise Voltage – nV/
Vn
Hz
13
VCC ± = ± 15 V
VIC = 0
RS = 20 Ω
TA = 25°C
35
30
25
20
15
10
f = 100 kHz
VIC = 0
VO = 0
RL = 2 kΩ
CL = 100 pF
12
11
VCC ± = ± 15 V
10
VCC ± = ± 5 V
9
8
5
0
10
100
1k
7
– 75 – 55 – 35 –15
10 k
5
25
45
65
85 105 125
TA – Free-Air Temperature – °C
f – Frequency – Hz
description
The TLE2071 and TLE2071A are low-noise, high-performance, high-speed, internally compensated
JFET-input operational amplifiers built using Texas Instruments complementary bipolar Excalibur process. The
TLE2071 and TLE2071A have maximum noise specifications for designs requiring certain noise limitations.
Both are pin-compatible upgrades to standard industry products.
AVAILABLE OPTIONS
PACKAGED DEVICES
TA
0°C to 70°C
– 40°C to 85°C
– 55°C to 125°C
CHIP
FORM
(Y)
VIOmax
AT 25°C
SMALL
OUTLINE
(D)
CHIP
CARRIER
(FK)
CERAMIC
DIP
(JG)
PLASTIC
DIP
(P)
2 mV
TLE2071ACD
—
—
TLE2071ACP
4 mV
TLE2071CD
—
—
TLE2071CP
TLE2071Y
2 mV
TLE2071AID
—
—
TLE2071AIP
—
4 mV
TLE2071ID
—
—
TLE2071IP
—
—
2 mV
—
TLE2071AMFK
TLE2071AMJG
—
—
4 mV
—
TLE2071MFK
TLE2071MJG
—
—
The D packages are available taped and reeled. Add R suffix to device type (e.g., TLE2071ACDR). Chip-form versions
are tested at TA = 25°C. For chip-form orders, contact your local TI sales office.
Copyright  1994, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
On products compliant to MIL-STD-883, Class B, all parameters are
tested unless otherwise noted. On all other products, production
processing does not necessarily include testing of all parameters.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
5–1
TLE2071, TLE2071A, TLE2071Y
EXCALIBUR LOW-NOISE HIGH-SPEED
JFET-INPUT OPERATIONAL AMPLIFIERS
SLOS119A – JUNE 1993 – REVISED AUGUST 1994
description (continued)
The design features a 30-V/µs minimum slew rate, which results in a high-power bandwidth. A low audio-band
noise of 28 nV/√Hz is typical with a 55 nV/√Hz maximum at 10 Hz. Settling time to 0.1% of a 10-V step
(1-kΩ/100-pF load) is approximately 400 ns. Gain-bandwidth product is typically 10 MHz with an 8 MHz
minimum. As such, the TLE2071 and TLE2071A offer significant speed and noise advantages at a low 1.7-mA
typical supply current.
The input current characteristics traditionally associated with JFET-input amplifiers have been maintained. Input
offset voltage is graded to a 4 mV and 2 mV maximum for the TLE2071 and TLE2071A, respectively. Typically,
temperature coefficient of input offset voltage is 3.2 µV/°C and typical CMRR and kSVR are 98 dB and 99 dB,
respectively. Device performance is relatively independent of supply voltage over the wide ± 2.25-V to ± 19-V
range. The input common-mode voltage range extends from the positive supply down to VCC – + 4 V without
significant degradation to dynamic performance. Maximum peak output voltage swing is from VCC + – 1 V to
VCC – + 1 V under light loading conditions. The output is capable of sourcing and sinking currents to at least
30 mA and can sustain shorts to either supply. Care must be taken to ensure that maximum power dissipation
is not exceeded.
Both the TLE2071 and TLE2071A are available in a wide variety of packages, including both the
industry-standard 8-pin small-outline version and chip form for high-density system applications. The C-suffix
devices are characterized for operation from 0°C to 70°C, the I-suffix devices over the – 40°C to 85°C range,
and the M-suffix devices over the full military temperature range of – 55°C to 125°C.
OFFSET N1
IN –
IN +
VCC –
1
8
2
7
3
6
4
5
FK PACKAGE
(TOP VIEW)
NC
OFFSET N1
NC
NC
NC
D, JG, OR P PACKAGE
(TOP VIEW)
NC
VCC +
OUT
OFFSET N2
4
3 2 1 20 19
18
5
17
6
16
7
15
8
14
9 10 11 12 13
NC
VCC –
NC
OFFSET N2
NC
NC
IN –
NC
IN +
NC
NC – No internal connection
symbol
IN +
+
IN –
–
OUT
5–2
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
NC
VCC +
NC
OUT
NC
TLE2071, TLE2071A, TLE2071Y
EXCALIBUR LOW-NOISE HIGH-SPEED
JFET-INPUT OPERATIONAL AMPLIFIERS
SLOS119A – JUNE 1993 – REVISED AUGUST 1994
TLE2071Y chip information
This chip, when properly assembled, displays characteristics similar to the TLE2071. Thermal compression or
ultrasonic bonding may be used on the doped-aluminum bonding pads. Chips may be mounted with conductive
epoxy or a gold-silicon preform.
BONDING PAD ASSIGNMENTS
(1)
(8)
(1)
VCC +
(7)
OFFSET N1
IN +
IN –
(3)
(2)
+
(6)
OUT
–
(5)
OFFSET N2
(4)
VCC –
(2)
85
(7)
(3)
CHIP THICKNESS: 15 TYPICAL
BONDING PADS: 4 × 4 MINIMUM
TJmax = 150°C
TOLERANCES ARE ± 10%.
(4)
ALL DIMENSIONS ARE IN MILS.
(5)
(6)
PIN (4) IS INTERNALLY CONNECTED
TO BACKSIDE OF THE CHIP.
58
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
5–3
5–4
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
Q2
IN +
IN –
Q1
D1
Q5
Q4
equivalent schematic
Q7
Q6
Q3
Q9
Q8
Q10
R1
Q12
OFFSET N1
C1
R3
Q11
R2
C2
R4
D2
VCC –
R7
C3
Q16
Q15
R5
Q14
Q13
C4
Q18
Q17
R6
VCC +
OFFSET N2
R9
C5
Q21
R8
Q19
Q20
R10
Q22
Q26
Q25
Q24
Q23
R11
Q27
D3
C6
Q29
Q28
R12
Q31
Q30
R13
R14
OUT
ACTUAL DEVICE
COMPONENT COUNT
33
Transistors
25
Resistors
8
Diodes
6
Capacitors
TLE2071, TLE2071A, TLE2071Y
EXCALIBUR LOW-NOISE HIGH-SPEED
JFET-INPUT
OPERATIONAL AMPLIFIERS
SLOS119A – JUNE 1993 – REVISED AUGUST 1994
TLE2071, TLE2071A, TLE2071Y
EXCALIBUR LOW-NOISE HIGH-SPEED
JFET-INPUT OPERATIONAL AMPLIFIERS
SLOS119A – JUNE 1993 – REVISED AUGUST 1994
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)†
Supply voltage, VCC + (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 V
Supply voltage, VCC – (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 19 V
Differential input voltage range, VID (see Note 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VCC + to VCC –
Input voltage range, VI (any input) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VCC + to VCC –
Input current, II (each input) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ± 1 mA
Output current, IO (each output) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ± 80 mA
Total current into VCC + . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160 mA
Total current out of VCC – . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160 mA
Duration of short-circuit current at (or below) 25°C (see Note 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . unlimited
Continuous total dissipation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . See Dissipation Rating Table
Operating free-air temperature range, TA: C suffix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0°C to 70°C
I suffix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 40°C to 85°C
M suffix . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 55°C to 125°C
Storage temperature range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – 65°C to 150°C
Case temperature for 60 seconds: FK package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260°C
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds: D or P package . . . . . . . . . . . . . . . . . 260°C
Lead temperature 1,6 mm (1/16 inch) from case for 60 seconds: JG package . . . . . . . . . . . . . . . . . . . . 300°C
† Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
NOTES: 1. All voltage values except differential voltages are with respect to the midpoint between VCC + and VCC – .
2. Differential voltages are at IN+ with respect to IN –.
3. The output can be shorted to either supply. Temperatures and/or supply voltages must be limited to ensure that the maximum
dissipation rate is not exceeded.
DISSIPATION RATING TABLE
PACKAGE
TA ≤ 25°C
POWER RATING
DERATING FACTOR
ABOVE TA = 25°C
TA = 70°C
POWER RATING
TA = 85°C
POWER RATING
TA = 125°C
POWER RATING
D
725 mW
5.8 mW/°C
464 mW
377 mW
145 mW
FK
1375 mW
11.0 mW/°C
880 mW
715 mW
275 mW
JG
1050 mW
8.4 mW/°C
672 mW
546 mW
210 mW
P
1000 mW
8.0 mW/°C
640 mW
344 mW
200 mW
recommended operating conditions
Supply voltage, VCC±
Common-mode input voltage
voltage, VIC
VCC ± = ± 5 V
VCC ± = ±15 V
Operating free-air temperature, TA
POST OFFICE BOX 655303
C SUFFIX
I SUFFIX
M SUFFIX
MIN
MAX
MIN
MAX
MIN
MAX
± 2.25
± 19
± 2.25
± 19
± 2.25
± 19
– 0.9
5
– 0.8
5
– 0.8
5
– 10.9
15
– 10.8
15
– 10.8
15
0
70
– 40
85
– 55
125
• DALLAS, TEXAS 75265
UNIT
V
V
°C
5–5
TLE2071, TLE2071A, TLE2071Y
EXCALIBUR LOW-NOISE HIGH-SPEED
JFET-INPUT OPERATIONAL AMPLIFIERS
SLOS119A – JUNE 1993 – REVISED AUGUST 1994
electrical characteristics at specified free-air temperature, VCC ± = ±5 V (unless otherwise noted)
PARAMETER
VIO
Input offset voltage
αVIO
Temperature coefficient
of input offset voltage
IIO
Input offset current
IIB
TA†
TEST CONDITIONS
25°C
VIC = 0,
0
RS = 50 Ω
VO = 0,
0
RS = 50 Ω
F ll range
Full
g
IO = – 200 µA
VOM +
M i
Maximum
positive
i i peak
k
output voltage swing
IO = – 2 mA
IO = – 20 mA
IO = 200 µA
VOM –
M i
Maximum
negative
i peak
k
output voltage swing
IO = 2 mA
IO = 20 mA
RL = 600 Ω
AVD
Large signal
L
Large-signal
i
l diff
differential
i l
voltage amplification
VO = ± 2
2.3
3V
RL = 2 kΩ
RL = 10 kΩ
ri
ci
Input resistance
Input capacitance
VIC = 0,
See Figure 5
MIN
TYP
MAX
0.3
2
4
3.2
29
µV/°C
5
100
5
100
pA
1.4
nA
15
175
15
175
pA
5
nA
5
to
– 1.9
5
to
– 0.9
3.8
Full range
3.7
25°C
3.5
Full range
3.4
25°C
1.5
Full range
1.5
25°C
– 3.5
Full range
– 3.4
25°C
– 3.7
Full range
– 3.6
25°C
– 1.5
Full range
– 1.5
25°C
80
Full range
79
25°C
90
Full range
89
25°C
95
Full range
94
5
to
–1
5
to
– 1.9
4.1
3.8
4.1
3.7
3.9
3.5
3.9
3.4
2.3
1.5
2.3
– 4.2
– 3.5
– 4.2
– 3.4
– 4.1
– 3.7
– 4.1
– 3.6
– 2.4
– 1.5
– 2.4
91
80
91
79
100
90
100
89
106
95
106
25°C
11
11
Differential
25°C
2.5
2.5
25°C
80
80
VIC = VICRmin,
VO = 0,
RS = 50 Ω
kSVR
Supply-voltage
pp y
g rejection
j
ratio(∆VCC± /∆VIO)
VCC ± = ± 5 V to ± 15 V,,
VO = 0,
RS = 50 Ω
25°C
70
Full range
68
25°C
82
Full range
80
† Full range is 0°C to 70°C.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
dB
94
Common
mode
Common-mode
Common
mode
rejection ratio
V
– 1.5
1012
CMRR
V
1.5
1012
f = 1 MHz
V
5
to
– 0.9
25°C
Open-loop output
impedance
mV
29
5
5
to
–1
UNIT
3.2
1.4
25°C
VIC = 0
zo
5–6
4
Full range
25°C
VICR
0.34
Full range
25°C
Input bias current
MAX
6
25°C
VO = 0,
0
TLE2071AC
TYP
Full range
Full range
VIC = 0,
0
See Figure 4
Common mode
C
Common-mode
d iinput
voltage
g range
g
TLE2071C
MIN
89
70
89
68
99
82
80
99
Ω
pF
Ω
dB
dB
TLE2071, TLE2071A, TLE2071Y
EXCALIBUR LOW-NOISE HIGH-SPEED
JFET-INPUT OPERATIONAL AMPLIFIERS
SLOS119A – JUNE 1993 – REVISED AUGUST 1994
electrical characteristics at specified free-air temperature, VCC ± = ±5 V (unless otherwise noted)
(continued)
PARAMETER
TEST CONDITIONS
ICC
Supply current
VO = 0
0,
No load
IOS
Short circuit output
Short-circuit
current
VO = 0
VID = 1 V
VID = – 1 V
TLE2071C
TLE2071AC
TA†
MIN
TYP
MAX
MIN
TYP
MAX
25°C
1.35
1.6
2.2
1.35
1.6
2.2
Full range
2.2
25°C
2.2
– 35
– 35
45
45
UNIT
mA
mA
operating characteristics at specified free-air temperature, VCC± = ±5 V
PARAMETER
TEST CONDITIONS
TA†
TLE2071C
MIN
TYP
25°C
SR +
SR –
ts
Vn
VN(PP)
Positive
rate
P i i slew
l
Negative
rate
N
i slew
l
Settling time
2.3
V,
VO(PP) = ± 2
3V
AVD = – 1
1,
RL = 2 kΩ
kΩ,
CL = 100 pF,
See Figure 1
AVD = – 1,
2-V
2
V step,
RL = 1 kΩ,
CL = 100 pF
To 10 mV
MIN
TYP
MAX
23
V/µs
V/
23
38
38
23
V/µs
V/
23
0.25
0.25
0.4
0.4
µs
To 1 mV
f = 10 kHz
f = 10 Hz to
10 kHz
f = 0.1 Hz to
10 Hz
25°C
UNIT
35
25°C
f = 10 Hz
RS = 20 Ω,
Ω
S Fi
See
Figure 3
MAX
35
25°C
Full
range
Equivalent input noise
voltage
Peak-to-peak
p k equivalent
q i l
P k
input noise voltage
Full
range
TLE2071AC
28
55
28
55
11.6
17
11.6
17
6
6
0.6
0.6
2.8
2.8
nV/√Hz
µV
V
25°C
In
Equivalent input noise
current
VIC = 0,
f = 10 kHz
25°C
THD + N
Total harmonic distortion
plus noise
VO(PP) = 5 V,
f = 1 kHz,
kHz
RS = 25 Ω
AVD = 10,
RL = 2 kΩ
kΩ,
25°C
B1
Unity-gain bandwidth
VI = 10 mV,
CL = 25 pF,
RL = 2 kΩ,
See Figure 2
25°C
94
9.4
94
9.4
MHz
BOM
Maximum output
output-swing
swing
bandwidth
VO(PP) = 4 V,
RL = 2 kΩ ,
AVD = – 1,
CL = 25 pF
25°C
28
2.8
28
2.8
MHz
φm
Phase margin
g at unity
y
gain
VI = 10 mV,,
CL = 25 pF,
RL = 2 kΩ,,
See Figure 2
25°C
56°
56°
0 013%
0.013%
fA/√Hz
0 013%
0.013%
† Full range is 0°C to 70°C.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
5–7
TLE2071, TLE2071A, TLE2071Y
EXCALIBUR LOW-NOISE HIGH-SPEED
JFET-INPUT OPERATIONAL AMPLIFIERS
SLOS119A – JUNE 1993 – REVISED AUGUST 1994
electrical characteristics at specified free-air temperature, VCC ± = ±15 V (unless otherwise noted)
PARAMETER
VIO
Input offset voltage
αVIO
Temperature coefficient
of input offset voltage
IIO
Input offset current
IIB
TA†
TEST CONDITIONS
25°C
VIC = 0,
0
RS = 50 Ω
VO = 0,
0
RS = 50 Ω
F ll range
Full
g
IO = – 200 µA
VOM +
M i
Maximum
positive
i i peak
k
output voltage swing
IO = – 2 mA
IO = – 20 mA
IO = 200 µA
VOM –
M i
Maximum
negative
i peak
k
output voltage swing
IO = 2 mA
IO = 20 mA
RL = 600 Ω
AVD
Large signal
L
Large-signal
i
l diff
differential
i l
voltage amplification
VO = ± 10 V
RL = 2 kΩ
RL = 10 kΩ
ri
ci
Input resistance
Input capacitance
VIC = 0,
See Figure 5
MIN
TYP
MAX
0.47
2
4
3.2
29
µV/°C
6
100
6
100
pA
1.4
nA
20
175
20
175
pA
5
nA
15
to
– 11.9
15
to
– 10.9
13.8
Full range
13.7
25°C
13.5
Full range
13.4
25°C
11.5
Full range
11.5
25°C
– 13.8
Full range
– 13.7
25°C
– 13.5
Full range
– 13.4
25°C
– 11.5
Full range
– 11.5
25°C
80
Full range
79
25°C
90
Full range
89
25°C
95
Full range
94
15
to
– 11
15
to
– 11.9
14.1
13.8
14.1
13.7
13.9
13.5
13.9
13.4
12.3
11.5
12.3
– 14.2
– 13.8
– 14.2
– 13.7
– 14
–13.5
– 14
– 13.4
– 12.4
– 11.5
– 12.4
96
80
96
79
109
90
109
89
118
95
118
25°C
7.5
7.5
Differential
25°C
2.5
2.5
25°C
80
80
VIC = VICRmin,
VO = 0,
RS = 50 Ω
kSVR
Supply-voltage
pp y
g rejection
j
ratio (∆VCC± /∆VIO)
VCC ± = ± 5 V to ± 15 V,,
VO = 0,
RS = 50 Ω
25°C
80
Full range
79
25°C
82
Full range
80
† Full range is 0°C to 70°C.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
dB
94
Common
mode
Common-mode
Common
mode
rejection ratio
V
– 11.5
1012
CMRR
V
11.5
1012
f = 1 MHz
V
15
to
– 10.9
25°C
Open-loop output
impedance
mV
29
5
15
to
– 11
UNIT
3.2
1.4
25°C
VIC = 0
zo
5–8
4
Full range
25°C
VICR
0.49
Full range
25°C
Input bias current
MAX
6
25°C
VO = 0,
0
TLE2071AC
TYP
Full range
Full range
VIC = 0,
0
See Figure 4
Common mode
C
Common-mode
d input
i
voltage
g range
g
TLE2071C
MIN
98
80
98
79
99
82
81
99
Ω
pF
Ω
dB
dB
TLE2071, TLE2071A, TLE2071Y
EXCALIBUR LOW-NOISE HIGH-SPEED
JFET-INPUT OPERATIONAL AMPLIFIERS
SLOS119A – JUNE 1993 – REVISED AUGUST 1994
electrical characteristics at specified free-air temperature, VCC ± = ±15 V (unless otherwise noted)
(continued)
PARAMETER
TEST CONDITIONS
ICC
Supply current
VO = 0
0,
No load
IOS
Short-circuit
Short
circuit output
current
VO = 0
VID = 1 V
VID = – 1 V
TLE2071C
TLE2071AC
TA†
MIN
TYP
MAX
MIN
TYP
MAX
25°C
1.35
1.7
2.2
1.35
1.7
2.2
Full range
25°C
2.2
2.2
– 30
– 45
– 30
– 45
30
48
30
48
UNIT
mA
mA
operating characteristics at specified free-air temperature, VCC± = ±15 V
PARAMETER
SR +
TEST CONDITIONS
Positive
rate
P i i slew
l
VO(PP) = 10 V,
V AVD = – 1,
1
RL = 2 kΩ
kΩ,
CL = 100 pF,
pF
See Figure 1
SR –
ts
Negative
rate
N
i slew
l
Settling time
Vn
Equivalent input noise
voltage
VN(PP)
Peak
Peak-to-peak
P k to peakk equivalent
i l
input noise voltage
AVD = – 1,
10-V
10
V step,
RL = 1 kΩ,
CL = 100 pF
MIN
TYP
25°C
30
40
Full
range
27
25°C
30
Full
range
27
TLE2071AC
MAX
MIN
TYP
30
40
MAX
45
30
45
V/µs
V/
27
0.4
0.4
1.5
1.5
µs
25°C
To 1 mV
f = 10 kHz
f = 10 Hz to
10 kHz
UNIT
V/µs
V/
27
To 10 mV
f = 10 Hz
RS = 20 Ω,
Ω,
See Figure 3
TLE2071C
TA†
25°C
28
55
28
55
11.6
17
11.6
17
6
nV√Hz
6
µV
V
25°C
f = 0.1 Hz to
10 Hz
06
0.6
06
0.6
28
2.8
28
2.8
In
Equivalent input noise
current
VIC = 0,
0
f = 10 kHz
25°C
THD + N
Total harmonic distortion
plus noise
VO(PP) = 20 V, AVD = 10,
f = 1 kHz,
kHz
RL = 2 kΩ
kΩ,
RS = 25 Ω
25°C
B1
Unity-gain bandwidth
VI = 10 mV,
CL = 25 pF,
25°C
8
10
8
10
MHz
BOM
output-swing
Maximum output
swing
bandwidth
VO(PP) = 20 V, AVD = – 1,
RL = 2 kΩ,
CL = 25 pF
25°C
478
637
478
637
kHz
φm
Phase margin
g at unity
y
gain
VI = 10 mV,,
CL = 25 pF,
25°C
RL = 2 kΩ,
See Figure 2
RL = 2 kΩ,,
See Figure 2
0 008%
0.008%
57°
fA/√Hz
0 008%
0.008%
57°
† Full range is 0°C to 70°C.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
5–9
TLE2071, TLE2071A, TLE2071Y
EXCALIBUR LOW-NOISE HIGH-SPEED
JFET-INPUT OPERATIONAL AMPLIFIERS
SLOS119A – JUNE 1993 – REVISED AUGUST 1994
electrical characteristics at specified free-air temperature, VCC ± = ±5 V (unless otherwise noted)
PARAMETER
VIO
Input offset voltage
αVIO
Temperature coefficient
of input offset voltage
IIO
Input offset current
IIB
TA†
TEST CONDITIONS
25°C
VIC = 0,
0
RS = 50 Ω,
Ω
VO = 0,
0
F ll range
Full
g
IO = – 200 µA
M i
Maximum
positive
i i peak
k
VOM +
output voltage swing
IO = – 2 mA
IO = – 20 mA
IO = 200 µA
VOM –
M i
Maximum
negative
i peak
k
output voltage swing
IO = 2 mA
IO = 20 mA
RL = 600 Ω
AVD
Large signal
L
Large-signal
i
l diff
differential
i l
voltage amplification
VO = ± 2
2.3
3 V RL = 2 kΩ
RL = 10 kΩ
ri
ci
Input resistance
Input capacitance
Full range
3.7
25°C
3.5
Full range
3.4
25°C
1.5
Full range
1.5
25°C
– 3.8
Full range
– 3.7
25°C
– 3.5
Full range
– 3.4
25°C
– 1.5
Full range
– 1.5
25°C
80
Full range
79
25°C
90
Full range
89
25°C
95
Full range
94
29
µV/°C
5
100
5
100
pA
5
nA
15
175
15
175
pA
10
nA
5
to
– 1.9
5
to
–1
5
to
– 1.9
4.1
3.8
4.1
3.7
3.9
3.5
3.9
3.4
2.3
1.5
2.3
– 4.2
– 3.8
– 4.2
– 3.7
– 4.1
– 3.5
– 4.1
– 3.4
– 2.4
– 1.5
– 2.4
91
80
91
79
100
90
100
89
106
95
106
11
Differential
25°C
2.5
2.5
25°C
80
80
kSVR
Supply voltage rejection
Supply-voltage
ratio (∆VCC± /∆VIO)
VCC ± = ± 5 V to ± 15 V,
VO = 0,
RS = 50 Ω
25°C
70
Full range
68
25°C
82
Full range
80
† Full range is – 40°C to 85°C.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
dB
94
11
VIC = VICRmin,
VO = 0,
RS = 50 Ω
V
– 1.5
25°C
Common-mode
Common
mode
rejection ratio
V
1.5
Common
mode
CMRR
V
5
to
– 0.8
1012
f = 1 MHz
mV
3.2
1012
Open-loop output
impedance
2
UNIT
29
5
to
– 0.8
3.8
MAX
5.6
25°C
zo
5–10
0.3
10
5
to
–1
25°C
VIC = 0
VIC = 0,
See Figure 5
4
TYP
3.2
Full range
RS = 50 Ω
MIN
5
25°C
Input bias current
TLE2071AI
MAX
7.6
Full range
25°C
VICR
0.34
Full range
VO = 0,
0
TYP
Full range
25°C
VIC = 0,
0
See Figure 4
Common mode
C
Common-mode
d input
i
voltage
g range
g
TLE2071I
MIN
89
70
89
68
99
82
80
99
Ω
pF
Ω
dB
dB
TLE2071, TLE2071A, TLE2071Y
EXCALIBUR LOW-NOISE HIGH-SPEED
JFET-INPUT OPERATIONAL AMPLIFIERS
SLOS119A – JUNE 1993 – REVISED AUGUST 1994
electrical characteristics at specified free-air temperature, VCC ± = ±5 V (unless otherwise noted)
(continued)
PARAMETER
TEST CONDITIONS
ICC
Supply current
VO = 0
0,
No load
IOS
Short-circuit
Short
circuit output
current
VO = 0
VID = 1 V
VID = – 1 V
TLE2071I
TLE2071AI
TA†
MIN
TYP
MAX
MIN
TYP
MAX
25°C
1.35
1.6
2.2
1.35
1.6
2.2
Full range
2.2
25°C
2.2
– 35
– 35
45
45
UNIT
mA
mA
operating characteristics at specified free-air temperature, VCC± = ±5 V
PARAMETER
TEST CONDITIONS
TA†
TLE2071I
MIN
TYP
25°C
SR +
Positive
rate
P i i slew
l
SR –
Negative
rate
N
i slew
l
ts
Settling time
Vn
Equivalent input noise
voltage
VN(PP)
Peak
P
Peak-to-peak
k to peakk equivalent
i l
input noise voltage
2.3
V,
VO(PP) = ± 2
3V
AVD = – 1
1,
RL = 2 kΩ
kΩ,
CL = 100 pF, See Figure 1
Full
range
AVD = – 1,
2-V
2
V step,
RL = 1 kΩ,
CL = 100 pF
TYP
MAX
V/µs
V/
22
38
38
22
V/µs
V/
22
0.25
0.25
0.4
0.4
µs
25°C
To 1 mV
f = 10 kHz
f = 10 Hz to
10 kHz
UNIT
35
22
To 10 mV
f = 10 Hz
RS = 20 Ω,
Ω,
See Figure 3
MIN
35
25°C
Full
range
TLE2071AI
MAX
25°C
28
55
28
55
11.6
17
11.6
17
6
6
06
0.6
06
0.6
nV/√Hz
V
µV
25°C
f = 0.1 Hz to
10 Hz
In
Equivalent input noise
current
VIC = 0,
f = 10 kHz
25°C
2.8
2.8
THD + N
Total harmonic distortion
plus noise
VO(PP) = 5 V, AVD = 10,
f = 1 kHz,
kHz
RL = 2 kΩ
kΩ,
RS = 25 Ω
25°C
0 013%
0.013%
0 013%
0.013%
B1
Unity-gain bandwidth
VI = 10 mV,
CL = 25 pF,
25°C
94
9.4
94
9.4
MHz
BOM
output-swing
Maximum output
swing
bandwidth
VO(PP) = 4 V, AVD = – 1,
RL = 2 kΩ ,
CL = 25 pF
25°C
28
2.8
28
2.8
MHz
φm
Phase margin at unity gain
VI = 10 mV,
CL = 25 pF,
25°C
56°
56°
RL = 2 kΩ,
See Figure 2
RL = 2 kΩ,
See Figure 2
fA/√Hz
† Full range is 40°C to 85°C.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
5–11
TLE2071, TLE2071A, TLE2071Y
EXCALIBUR LOW-NOISE HIGH-SPEED
JFET-INPUT OPERATIONAL AMPLIFIERS
SLOS119A – JUNE 1993 – REVISED AUGUST 1994
electrical characteristics at specified free-air temperature, VCC ± = ±15 V (unless otherwise noted)
PARAMETER
VIO
Input offset voltage
αVIO
Temperature coefficient
of input offset voltage
IIO
Input offset current
IIB
TA†
TEST CONDITIONS
VO = 0,
0
25°C
VO = 0,
0
IO = – 2 mA
IO = – 20 mA
IO = 200 µA
VOM –
M i
Maximum
negative
i peak
k
output voltage swing
IO = 2 mA
IO = 20 mA
RL = 600 Ω
AVD
Large signal
L
Large-signal
i
l diff
differential
i l
voltage amplification
VO = ± 10 V
RL = 2 kΩ
RL = 10 kΩ
ri
ci
Input resistance
Input capacitance
Full range
13.7
25°C
13.5
Full range
13.4
25°C
11.5
Full range
11.5
25°C
– 13.8
Full range
– 13.7
25°C
– 13.5
Full range
– 13.4
25°C
– 11.5
Full range
– 11.5
25°C
80
Full range
79
25°C
90
Full range
89
25°C
95
Full range
94
100
6
100
pA
5
nA
20
175
20
175
pA
10
nA
15
to
– 11.9
15
to
– 11
15
to
– 11.9
14.1
13.8
14.1
13.7
13.9
13.5
13.9
13.4
12.3
11.5
12.3
– 14.2
– 13.8
– 14.2
– 13.7
– 14
–13.5
– 14
– 13.4
– 12.4
– 11.5
– 12.4
96
80
96
79
109
90
109
89
118
95
118
Differential
25°C
2.5
2.5
80
80
25°C
80
Full range
79
Supply-voltage
Supply
voltage rejection
ratio (∆VCC± /∆VIO)
VCC ± = ± 5 V to ± 15 V,
VO = 0,
RS = 50 Ω
25°C
82
Full range
80
dB
94
7.5
VIC = VICRmin,
VO = 0
0,
RS = 50 Ω
V
– 11.5
7.5
Common mode
Common-mode
rejection ratio
V
11.5
25°C
CMRR
V
15
to
– 10.8
Common
mode
25°C
98
80
Ω
pF
Ω
98
dB
† Full range is – 40°C to 85°C.
5–12
6
1012
f = 1 MHz
kSVR
µV/°C
1012
Open-loop output
impedance
mV
29
25°C
zo
UNIT
3.2
15
to
– 10.8
13.8
2
5.6
10
15
to
– 11
25°C
VIC = 0
VIC = 0,
See Figure 5
0.47
MAX
29
Full range
IO = – 200 µA
4
TYP
5
25°C
F ll range
Full
g
MIN
3.2
Full range
RS = 50 Ω
TLE2071AI
MAX
7.6
Full range
Input bias current
M i
Maximum
positive
i i peak
k
VOM +
output voltage swing
0.49
Full range
25°C
VICR
TYP
25°C
VIC = 0,
0
RS = 50 Ω,
Ω
VIC = 0,
0
See Figure 4
Common mode
C
Common-mode
d input
i
voltage
g range
g
TLE2071I
MIN
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
79
99
82
80
99
dB
TLE2071, TLE2071A, TLE2071Y
EXCALIBUR LOW-NOISE HIGH-SPEED
JFET-INPUT OPERATIONAL AMPLIFIERS
SLOS119A – JUNE 1993 – REVISED AUGUST 1994
electrical characteristics at specified free-air temperature, VCC ± = ±15 V (unless otherwise noted)
(continued)
PARAMETER
TEST CONDITIONS
ICC
Supply current
VO = 0
0,
No load
IOS
Short-circuit
Short
circuit output
current
VO = 0
VID = 1 V
VID = – 1 V
TLE2071I
TLE2071AI
TA†
MIN
TYP
MAX
MIN
TYP
MAX
25°C
1.35
1.7
2.2
1.35
1.7
2.2
Full range
25°C
2.2
2.2
– 30
– 45
– 30
– 45
30
48
30
48
UNIT
mA
mA
operating characteristics at specified free-air temperature, VCC± = ±15 V
PARAMETER
SR +
P i i slew
Positive
l
rate
SR –
Negative
rate
N
i slew
l
ts
Settling time
Vn
Equivalent
input
q
p noise
voltage
VN(PP)
Peak-to-peak
P k
p k equivalent
q i l
i
i voltage
l
input
noise
TEST CONDITIONS
VO(PP) = ± 10 V
V,
AVD = – 1,
RL = 2 kΩ
kΩ,
1
CL = 100 pF,
See Figure 1
AVD = – 1,
10-V step,
p,
RL = 1 kΩ,
CL = 100 pF
MIN
TYP
25°C
30
40
Full
range
24
25°C
30
Full
range
24
TLE2071AI
MAX
MIN
TYP
30
40
MAX
45
30
45
V/µs
V/
24
0.4
0.4
1.5
1.5
µs
25°C
To 1 mV
f = 10 kHz
f = 10 Hz to
10 kHz
f = 0.1 Hz to
10 Hz
UNIT
V/
V/µs
24
To 10 mV
f = 10 Hz
RS = 20 Ω,
Ω
S Fi
See
Figure 3
TLE2071I
TA†
25°C
28
55
28
55
11.6
17
11.6
17
6
6
0.6
0.6
nV/√Hz
V
µV
25°C
In
Equivalent input noise
current
VIC = 0,
f = 10 kHz
25°C
2.8
2.8
THD + N
Total harmonic distortion
plus noise
VO(PP) = 20 V, AVD = 10,
f = 1 kHz,
kHz
RL = 2 kΩ
kΩ,
RS = 25 Ω
25°C
0 008%
0.008%
0 008%
0.008%
B1
Unity-gain bandwidth
VI = 10 mV,,
CL = 25 pF,
25°C
8
10
8
10
MHz
BOM
Maximum output-swing
p
g
bandwidth
VO(PP) = 20 V,, AVD = – 1,,
RL = 2 kΩ,
CL = 25 pF
25°C
478
637
478
637
kHz
φm
Phase margin at unity gain
VI = 10 mV,,
CL = 25 pF,
25°C
RL = 2 kΩ,,
See Figure 2
RL = 2 kΩ,,
See Figure 2
57°
fA/√Hz
57°
† Full range is – 40°C to 85°C.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
5–13
TLE2071, TLE2071A, TLE2071Y
EXCALIBUR LOW-NOISE HIGH-SPEED
JFET-INPUT OPERATIONAL AMPLIFIERS
SLOS119A – JUNE 1993 – REVISED AUGUST 1994
electrical characteristics at specified free-air temperature, VCC ± = ±5 V (unless otherwise noted)
PARAMETER
VIO
Input offset voltage
αVIO
Temperature coefficient
of input offset voltage
IIO
Input offset current
IIB
TA†
TEST CONDITIONS
25°C
VIC = 0,
0
RS = 50 Ω,
Ω
VO = 0,
0
F ll range
Full
g
IO = – 200 µA
M i
Maximum
positive
i i peak
k
VOM +
output voltage swing
IO = – 2 mA
IO = – 20 mA
IO = 200 µA
VOM –
M i
Maximum
negative
i peak
k
output voltage swing
IO = 2 mA
IO = 20 mA
RL = 600 Ω
AVD
Large signal
L
Large-signal
i
l diff
differential
i l
voltage amplification
VO = ± 2
2.3
3 V RL = 2 kΩ
RL = 10 kΩ
ri
ci
Input resistance
Input capacitance
Full range
3.6
25°C
3.5
Full range
3.3
25°C
1.5
Full range
1.4
25°C
– 3.8
Full range
– 3.6
25°C
– 3.5
Full range
– 3.3
25°C
– 1.5
Full range
– 1.4
25°C
80
Full range
78
25°C
90
Full range
88
25°C
95
Full range
93
29∗
µV/°C
5
100
5
100
pA
20
nA
15
175
15
175
pA
65
nA
5
to
– 1.9
5
to
–1
5
to
– 1.9
4.1
3.8
4.1
3.6
3.9
3.5
3.9
3.3
2.3
1.5
2.3
– 4.2
– 3.8
– 4.2
– 3.6
– 4.1
– 3.5
– 4.1
– 3.3
– 2.4
– 1.5
– 2.4
91
80
91
78
100
90
100
88
106
95
106
11
Differential
25°C
2.5
2.5
25°C
80
80
kSVR
Supply voltage rejection
Supply-voltage
ratio (∆VCC± /∆VIO)
VCC ± = ± 5 V to ± 15 V,
VO = 0,
RS = 50 Ω
25°C
70
Full range
68
25°C
82
Full range
80
∗On products compliant to MIL-STD-883, Class B, this parameter is not production tested.
† Full range is – 55°C to 125°C.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
dB
93
11
VIC = VICRmin,
VO = 0,
RS = 50 Ω
V
– 1.4
25°C
Common-mode
Common
mode
rejection ratio
V
1.4
Common
mode
CMRR
V
5
to
– 0.8
1012
f = 1 MHz
mV
3.2
1012
Open-loop output
impedance
2
UNIT
29∗
5
to
– 0.8
3.8
MAX
7.2
25°C
zo
5–14
0.3
65
5
to
–1
25°C
VIC = 0
VIC = 0,
See Figure 5
4
TYP
3.2
Full range
RS = 50 Ω
MIN
20
25°C
Input bias current
TLE2071AM
MAX
9.2
Full range
25°C
VICR
0.34
Full range
VO = 0,
0
TYP
Full range
25°C
VIC = 0,
0
See Figure 4
Common mode
C
Common-mode
d input
i
voltage
g range
g
TLE2071M
MIN
89
70
89
68
99
82
80
99
Ω
pF
Ω
dB
dB
TLE2071, TLE2071A, TLE2071Y
EXCALIBUR LOW-NOISE HIGH-SPEED
JFET-INPUT OPERATIONAL AMPLIFIERS
SLOS119A – JUNE 1993 – REVISED AUGUST 1994
electrical characteristics at specified free-air temperature, VCC ± = ±5 V (unless otherwise noted)
PARAMETER
TEST CONDITIONS
ICC
Supply current
VO = 0
0,
No load
IOS
Short circuit output
Short-circuit
current
VO = 0
VID = 1 V
VID = – 1 V
TLE2071M
TLE2071AM
TA†
MIN
TYP
MAX
MIN
TYP
MAX
25°C
1.35
1.6
2.2
1.35
1.6
2.2
Full range
2.2
25°C
2.2
– 35
– 35
45
45
UNIT
mA
mA
operating characteristics at specified free-air temperature, VCC± = ±5 V
PARAMETER
TEST CONDITIONS
TA†
TLE2071M
MIN
TYP
25°C
SR +
Positive
rate
P i i slew
l
SR –
Negative
rate
N
i slew
l
ts
Settling time
Vn
Equivalent input noise
voltage
VN(PP)
Peak to peak equivalent
Peak-to-peak
input noise voltage
2.3
V,
VO(PP) = ± 2
3V
AVD = – 1
1,
RL = 2 kΩ
kΩ,
CL = 100 pF,
See Figure 1
Full
range
AVD = – 1,
2-V
2
V step,
RL = 1 kΩ,
CL = 100 pF
TYP
MAX
V/µs
V/
20∗
38
38
20∗
V/µs
V/
20∗
0.25
0.25
0.4
0.4
µs
25°C
To 1 mV
f = 10 kHz
28
25°C
11.6
f = 10 Hz to
10 kHz
f = 0.1 Hz to
10 Hz
UNIT
35
20∗
To 10 mV
f = 10 Hz
RS = 20 Ω,
Ω
See Figure 3
MIN
35
25°C
Full
range
TLE2071AM
MAX
55∗
17∗
28
11.6
6
6
06
0.6
06
0.6
55∗
17∗
nV/√Hz
µV
25°C
In
Equivalent input noise
current
VIC = 0,
f = 10 kHz
25°C
2.8
2.8
THD + N
Total harmonic distortion
plus noise
VO(PP) = 5 V,
f = 1 kHz,
kHz
RS = 25 Ω
AVD = 10,
RL = 2 kΩ
kΩ,
25°C
0 013%
0.013%
0 013%
0.013%
B1
Unity-gain bandwidth
VI = 10 mV,
CL = 25 pF,
RL = 2 kΩ,
See Figure 2
25°C
94
9.4
94
9.4
MHz
BOM
Maximum output
output-swing
swing
bandwidth
VO(PP) = 4 V,
RL = 2 kΩ ,
AVD = – 1,
CL = 25 pF
25°C
28
2.8
28
2.8
MHz
56°
56°
VI = 10 mV,
RL = 2 kΩ,
25°C
CL = 25 pF,
See Figure 2
∗On products compliant to MIL-STD-883, Class B, this parameter is not production tested.
† Full range is – 55°C to 125°C.
φm
Phase margin at unity
gain
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
fA/√Hz
5–15
TLE2071, TLE2071A, TLE2071Y
EXCALIBUR LOW-NOISE HIGH-SPEED
JFET-INPUT OPERATIONAL AMPLIFIERS
SLOS119A – JUNE 1993 – REVISED AUGUST 1994
electrical characteristics at specified free-air temperature, VCC ± = ±15 V (unless otherwise noted)
PARAMETER
VIO
Input offset voltage
αVIO
Temperature coefficient
of input offset voltage
IIO
Input offset current
IIB
TA†
TEST CONDITIONS
25°C
VIC = 0,
0
RS = 50 Ω
VO = 0,
0
F ll range
Full
g
IO = – 200 µA
VOM +
M i
Maximum
positive
i i peak
k
output voltage swing
IO = – 2 mA
IO = – 20 mA
IO = 200 µA
VOM –
M i
Maximum
negative
i peak
k
output voltage swing
IO = 2 mA
IO = 20 mA
RL = 600 Ω
AVD
Large signal
L
Large-signal
i
l diff
differential
i l
voltage amplification
VO = ± 10 V
RL = 2 kΩ
RL = 10 kΩ
ri
ci
Input resistance
Input capacitance
Full range
13.6
25°C
13.5
Full range
13.3
25°C
11.5
Full range
11.4
25°C
– 13.8
Full range
– 13.6
25°C
– 13.5
Full range
– 13.3
25°C
– 11.5
Full range
– 11.4
25°C
80
Full range
78
25°C
90
Full range
88
25°C
95
Full range
93
29∗
µV/°C
6
100
6
100
pA
20
nA
20
175
20
175
pA
65
nA
15
to
– 11.9
15
to
– 11
15
to
– 11.9
14.1
13.8
14.1
13.6
13.9
13.5
13.9
13.3
12.3
11.5
12.3
– 14.2
– 13.8
– 14.2
– 13.6
– 14
–13.5
– 14
– 13.3
– 12.4
– 11.5
– 12.4
96
80
96
78
109
90
109
88
118
95
118
7.5
Differential
25°C
2.5
2.5
25°C
80
80
kSVR
Supply voltage rejection
Supply-voltage
ratio (∆VCC± /∆VIO)
VCC ± = ± 5 V to ± 15 V,
VO = 0,
RS = 50 Ω
25°C
80
Full range
78
25°C
82
Full range
80
∗On products compliant to MIL-STD-883, Class B, this parameter is not production tested.
† Full range is – 55°C to 125°C.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
dB
93
7.5
VIC = VICRmin,
VO = 0,
RS = 50 Ω
V
– 11.4
25°C
Common-mode
Common
mode
rejection ratio
V
11.4
Common
mode
CMRR
V
15
to
– 10.9
1012
f = 1 MHz
mV
3.2
1012
Open-loop output
impedance
2
UNIT
29∗
15
to
– 10.9
13.8
MAX
7.2
25°C
zo
5–16
0.47
65
15
to
– 11
25°C
VIC = 0
VIC = 0,
See Figure 5
4
TYP
3.2
Full range
RS = 50 Ω
MIN
20
25°C
Input bias current
TLE2071AM
MAX
9.2
Full range
25°C
VICR
0.49
Full range
VO = 0,
0
TYP
Full range
25°C
VIC = 0,
0
See Figure 4
Common mode
C
Common-mode
d input
i
voltage
g range
g
TLE2071M
MIN
98
80
98
78
99
82
80
99
Ω
pF
Ω
dB
dB
TLE2071, TLE2071A, TLE2071Y
EXCALIBUR LOW-NOISE HIGH-SPEED
JFET-INPUT OPERATIONAL AMPLIFIERS
SLOS119A – JUNE 1993 – REVISED AUGUST 1994
electrical characteristics at specified free-air temperature, VCC ± = ±15 V (unless otherwise noted)
(continued)
PARAMETER
TEST CONDITIONS
ICC
Supply current
VO = 0
0,
No load
IOS
Short circuit output current
Short-circuit
VO = 0
VID = 1 V
VID = – 1 V
TLE2071M
TLE2071AM
TA†
MIN
TYP
MAX
MIN
TYP
MAX
25°C
1.35
1.7
2.2
1.35
1.7
2.2
Full range
25°C
2.2
2.2
– 30
– 45
– 30
– 45
30
48
30
48
UNIT
mA
mA
† Full range is – 55°C to 125°C.
operating characteristics at specified free-air temperature, VCC± = ±15 V
PARAMETER
SR +
TEST CONDITIONS
Positive
rate
P i i slew
l
VO(PP) = 10 V,
V AVD = – 1,
1
RL = 2 kΩ
kΩ,
CL = 100 pF,
pF
See Figure 1
SR –
Negative
rate
N
i slew
l
ts
Settling time
Vn
VN(PP)
AVD = – 1,
10-V
10
V step,
RL = 1 kΩ,
CL = 100 pF
Peakk to peakk equivalent
P
Peak-to-peak
i l
input noise voltage
TYP
25°C
30
40
Full
range
22
25°C
30
Full
range
22
TLE2071AM
MAX
MIN
TYP
30
40
MAX
45
30
45
V/µs
V/
22
0.4
0.4
1.5
1.5
µs
To 1 mV
f = 10 Hz to
10 kHz
UNIT
V/µs
V/
22
25°C
f = 10 kHz
RS = 20 Ω,
Ω,
See Figure 3
MIN
To 10 mV
f = 10 Hz
Equivalent input noise
voltage
TLE2071M
TA†
28
25°C
11.6
55∗
17∗
28
11.6
6
6
06
0.6
06
0.6
55∗
17∗
nV/√Hz
V
µV
25°C
f = 0.1 Hz to
10 Hz
In
Equivalent input noise
current
VIC = 0,
f = 10 kHz
25°C
2.8
2.8
THD + N
Total harmonic distortion
plus noise
VO(PP) = 20 V, AVD = 10,
f = 1 kHz,
kHz
RL = 2 kΩ
kΩ,
RS = 25 Ω
25°C
0 008%
0.008%
0 008%
0.008%
B1
Unity-gain bandwidth
VI = 10 mV,
CL = 25 pF,
25°C
8∗
10
8∗
10
MHz
BOM
output-swing
Maximum output
swing
bandwidth
VO(PP) = 20 V, AVD = – 1,
RL = 2 kΩ,
CL = 25 pF
25°C
478∗
637
478∗
637
kHz
RL = 2 kΩ,
See Figure 2
VI = 10 mV,
RL = 2 kΩ,
25°C
CL = 25 pF,
See Figure 2
∗On products compliant to MIL-STD-883, Class B, this parameter is not production tested.
† Full range is – 55°C to 125°C.
φm
Phase margin at unity
gain
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
57°
fA/√Hz
57°
5–17
TLE2071, TLE2071A, TLE2071Y
EXCALIBUR LOW-NOISE HIGH-SPEED
JFET-INPUT OPERATIONAL AMPLIFIERS
SLOS119A – JUNE 1993 – REVISED AUGUST 1994
electrical characteristics at VCC± = ±15 V, TA = 25°C
PARAMETER
VIO
IIO
Input offset voltage
IIB
Input bias current
VICR
C
Common-mode
d iinput
p voltage
l g range
g
RS = 50 Ω
Maximum
positive
peak
M i
p
ii p
k output
p voltage
l g swing
i g
VOM +
VOM –
AVD
ri
TLE2071Y
TEST CONDITIONS
VIC = 0,
Input offset current
Maximum
negative
g i peak
p k output
p voltage
M i
l g swing
i g
L g ig l differential
Large-signal
diff
i l voltage
l g amplification
plifi i
Input resistance
RS = 50 Ω
VO = 0,
VIC = 0
0,
MIN
VO = 0
0,
TYP
4
mV
6
100
pA
20
175
pA
15
to
– 11
15
to
11.9
IO = – 200 µA
IO = – 2 mA
13.8
14.1
13.5
13.9
IO = – 20 mA
IO = 200 µA
11.5
12.3
– 13.8
– 14.2
VO = ± 10 V
– 13.5
– 14
– 11.5
– 12.4
RL = 600 Ω
80
96
RL = 2 kΩ
90
109
RL = 10 kΩ
95
118
V
V
V
dB
Ω
1012
VIC = 0
Common mode
7.5
Differential
2.5
ci
Input capacitance
VO = 0,
See Figure 5
zo
Open-loop output impedance
f = 1 MHz
CMRR
Common-mode rejection ratio
VIC = VICRmin,
RS = 50 Ω
VO = 0,
kSVR
Supply-voltage rejection ratio (∆VCC± /∆VIO)
VCC ± = ± 5 V to ±15 V,
RS = 50 Ω
VO = 0,
ICC
Supply current
VO = 0,
IOS
Short-circuit output current
VO = 0
pF
80
Ω
80
98
dB
82
99
dB
No load
1.35
1.7
VID = 1 V
VID = – 1 V
– 30
– 45
30
48
2.2
2 kΩ
10 kΩ
VCC +
VCC +
2 kΩ
–
+
VCC –
VO
RL
VI
VCC –
CL†
Figure 1. Slew-Rate Test Circuit
POST OFFICE BOX 655303
VO
RL
CL†
Figure 2. Unity-Gain Bandwidth
and Phase-Margin Test Circuit
† Includes fixture capacitance
5–18
100 Ω
–
+
• DALLAS, TEXAS 75265
mA
mA
PARAMETER MEASUREMENT INFORMATION
VI
UNIT
0.49
See Figure 4
IO = 2 mA
IO = 20 mA
MAX
TLE2071, TLE2071A, TLE2071Y
EXCALIBUR LOW-NOISE HIGH-SPEED
JFET-INPUT OPERATIONAL AMPLIFIERS
SLOS119A – JUNE 1993 – REVISED AUGUST 1994
PARAMETER MEASUREMENT INFORMATION
2 kΩ
VCC +
Ground Shield
–
+
RS
RS
VCC +
–
+
VO
VO
VCC –
Picoammeters
VCC –
Figure 3. Noise-Voltage Test Circuit
Figure 4. Input-Bias and OffsetCurrent Test Circuit
VCC +
IN –
–
+
Cid
IN +
Cic
Cic
VO
VCC –
Figure 5. Internal Input Capacitance
typical values
Typical values presented in this data sheet represent the median (50% point) of device parametric performance.
input bias and offset current
At the picoampere bias-current level typical of the TLE2071 and TLE2071A, accurate measurement of the bias
becomes difficult. Not only does this measurement require a picoammeter, but test socket leakages can easily
exceed the actual device bias currents. To accurately measure these small currents, Texas Instruments uses
a two-step process. The socket leakage is measured using picoammeters with bias voltages applied but with
no device in the socket. The device is then inserted in the socket and a second test is performed that measures
both the socket leakage and the device input bias current. The two measurements are then subtracted
algebraically to determine the bias current of the device.
TYPICAL CHARACTERISTICS
Table of Graphs
FIGURE
VIO
Input offset voltage
Distribution
αVIO
Temperature coefficient
Distribution
IIO
Input offset current
vs Free-air temperature
8, 9
IIB
Input bias current
vs Free-air temperature
p
vs Supply voltage
8,, 9
10
VICR
VID
Common-mode input voltage range
vs Free-air temperature
Differential input voltage
vs Output voltage
12, 13
VOM +
Maximum
p
positive
peak
p voltage
M i
ii p
k output
l g
vs Output current
vs Free-air temperature
p
vs S
Supply
l voltage
l
14
16, 17
18
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
6
7
11
5–19
TLE2071, TLE2071A, TLE2071Y
EXCALIBUR LOW-NOISE HIGH-SPEED
JFET-INPUT OPERATIONAL AMPLIFIERS
SLOS119A – JUNE 1993 – REVISED AUGUST 1994
TYPICAL CHARACTERISTICS
Table of Graphs (Continued)
FIGURE
VOM –
Maximum
negative
g i p
peak
p voltage
M i
k output
l g
vs Output current
vs Free-air temperature
p
vs S
Supply
l voltage
l
VO(PP)
VO
Maximum peak-to-peak output voltage
vs Frequency
19
Output voltage
vs Settling time
20
AVD
Differential
Diff
i l voltage
l g amplification
plifi i
vs Load resistance
vs Free-air temperature
p
F
vs Frequency
21
22, 23
24, 25
CMRR
Common-mode rejection ratio
vs Frequency
q
y
vs Free-air temperature
26
27
kSVR
Supply-voltage rejection ratio
vs Frequency
q
y
vs Free-air temperature
28
29
ICC
Supply
S pply current
vs Supply voltage
vs Free-air temperature
p
i l iinput voltage
l
vs Diff
Differential
IOS
Short-circuit
Sh
i i output
p current
vs Supply voltage
vs Time
i temperature
vs F
Free-air
SR
Slew
rate
Sl
vs Free
Free-air
air temperature
vs Load resistance
i l iinput voltage
l
vs Diff
Differential
Vn
Equivalent input noise voltage
vs Frequency
41
Input-referred noise voltage
vs Noise bandwidth
Over a 10-second time interval
42
43
Third-octave spectral noise density
vs Frequency bands
44
THD + N
Total harmonic distortion plus noise
vs Frequency
B1
Unity-gain bandwidth
vs Load capacitance
47
Gain-bandwidth product
vs Free-air temperature
p
vs Supply voltage
48
49
Gain margin
vs Load capacitance
50
Phase
margin
gi
Ph
vs Free
Free-air
air temperature
vs Supply
pp y voltage
g
vs Load
L d capacitance
i
51
52
53
Phase shift
vs Frequency
Large-signal pulse response, noninverting
vs Time
54
Small-signal pulse response
vs Time
55
Closed-loop output impedance
vs Frequency
56
Vn
φm
zo
5–20
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
15
16, 17
18
30
31
32, 33
34
35
36
37, 38
39
40
45, 46
24, 25
TLE2071, TLE2071A, TLE2071Y
EXCALIBUR LOW-NOISE HIGH-SPEED
JFET-INPUT OPERATIONAL AMPLIFIERS
SLOS119A – JUNE 1993 – REVISED AUGUST 1994
TYPICAL CHARACTERISTICS†
DISTRIBUTION OF TLE2071
INPUT OFFSET VOLTAGE
30
27
DISTRIBUTION OF TLE2071 INPUT OFFSET
VOLTAGE TEMPERATURE COEFFICIENT
30
VCC = ± 15 V
TA = 25°C
P Package
Percentage of Amplifiers – %
Percentage of Units – %
24
21
18
15
12
9
6
3
0
–4
VCC = ± 15 V
TA = – 55°C to 125°C
P Package
27
24
21
18
15
12
9
6
3
– 2.4
– 0.8
2.4
0.8
0
– 40 – 32 – 24 –16 – 8
4
Figure 6
1
IIO
0.1
IIB
0.01
45
65
85 105 125
IIB
I IO – Input Bias and Input Offset Currents – nA
IIB and IIO
IIB
I IO – Input Bias and Input Offset Currents – nA
IIB and IIO
VCC ± = ± 5 V
VIC = 0
VO = 0
25
16
24
32
40
INPUT BIAS CURRENT AND
INPUT OFFSET CURRENT
vs
FREE-AIR TEMPERATURE
100
0.001
– 75 – 55 – 35 – 15 – 5
8
Figure 7
INPUT BIAS CURRENT AND
INPUT OFFSET CURRENT
vs
FREE-AIR TEMPERATURE
10
0
αVIO – Temperature Coefficient – µV/°C
VIO – Input Offset Voltage – mV
100
10
VCC ± = ± 15 V
VIC = 0
VO = 0
IIB
1
0.1
IIO
0.01
0.001
– 75 – 55 – 35 – 15
TA – Free-Air Temperature – °C
5
25
45
65
85 105 125
TA – Free-Air Temperature – °C
Figure 8
Figure 9
† Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
5–21
TLE2071, TLE2071A, TLE2071Y
EXCALIBUR LOW-NOISE HIGH-SPEED
JFET-INPUT OPERATIONAL AMPLIFIERS
SLOS119A – JUNE 1993 – REVISED AUGUST 1994
TYPICAL CHARACTERISTICS†
INPUT BIAS CURRENT
vs
SUPPLY VOLTAGE
COMMON-MODE INPUT VOLTAGE RANGE
vs
FRRE-AIR TEMPERATURE
VVIC
ICR – Common-Mode Input Voltage Range – V
10 6
VICmax = VCC +
IIIB
IB – Input Bias Current – pA
10 5
TA = 125°C
VICmin
10 4
10 3
10 2
TA = 25°C
10 1
TA = – 55°C
10 0
0
5
10
15
20
25
30
35
40
45
VCC + + 0.5
RS = 50 Ω
VCC +
VICmax
VCC + – 0.5
VCC – + 3.5
VICmin
VCC – + 3
VCC – + 2.5
VCC – + 2
– 75 – 55 – 35 – 15
Figure 10
200
400
0
RL = 600 Ω
RL = 2 kΩ
RL = 10 kΩ
RL = 10 kΩ
– 100
RL = 2 kΩ
– 200
– 300
– 400
–5 –4
RL = 600 Ω
–3
– 2 – 10
VCC ± = ± 15 V
VIC = 0
RS = 50 Ω
TA = 25°C
300
100
0
65
85 105 125
DIFFERENTIAL INPUT VOLTAGE
vs
OUTPUT VOLTAGE
V
VID
ID – Differential Input Voltage – uV
µV
V
VID
ID – Differential Input Voltage – uV
µV
300
45
Figure 11
DIFFERENTIAL INPUT VOLTAGE
vs
OUTPUT VOLTAGE
VCC ± = ± 5 V
VIC = 0
RS = 50 Ω
TA = 25°C
25
TA – Free-Air Temperature – °C
VCC – Total Supply Voltage (Referred to VCC – ) – V
400
5
1
2
3
4
5
200
RL = 600 Ω
RL = 2 kΩ
100
0
RL = 10 kΩ
RL = 10 kΩ
– 100
RL = 2 kΩ
– 200
RL = 600 Ω
– 300
– 400
– 15
– 10
VO – Output Voltage – V
–5
0
5
10
VO – Output Voltage – V
Figure 12
Figure 13
† Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.
5–22
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
15
TLE2071, TLE2071A, TLE2071Y
EXCALIBUR LOW-NOISE HIGH-SPEED
JFET-INPUT OPERATIONAL AMPLIFIERS
SLOS119A – JUNE 1993 – REVISED AUGUST 1994
TYPICAL CHARACTERISTICS†
15
13.5
12
TA = – 55°C
10.5
9
7.5
TA = 25°C
6
TA = 125°C
4.5
TA = 85°C
3
VCC ± = ± 15 V
1.5
0
0
– 5 –10 –15 – 20 – 25 – 30 – 35 – 40 – 45 – 50
MAXIMUM NEGATIVE PEAK OUTPUT VOLTAGE
vs
OUTPUT CURRENT
V OM – – Maximum Negative Peak Output Voltage – V
VVOM
OM+ – Maximum Positive Peak Output Voltage – V
MAXIMUM POSITIVE PEAK OUTPUT VOLTAGE
vs
OUTPUT CURRENT
–15
–13.5
TA = – 55°C
–12
–10.5
TA = 25°C
–9
–7.5
–6
TA = 85°C
– 4.5
TA = 125°C
–3
VCC ± = ± 15 V
–1.5
0
0
5
IO – Output Current – mA
IO = – 20 mA
1
VCC ± = ± 5 V
–1
IO = 20 mA
–3
IO = 2 mA
–4
–5
– 75 – 55 – 35 –15
IO = 200 µA
5
25
30
35
40
45
50
45
MAXIMUM PEAK OUTPUT VOLTAGE
vs
FREE-AIR TEMPERATURE
| V OM | – Maximum Peak Output Voltage – V
VOM – Maximum Peak Output Voltage – V
V
OM
IO = – 2 mA
3
–2
25
15
IO = – 200 µA
4
0
20
Figure 15
MAXIMUM PEAK OUTPUT VOLTAGE
vs
FREE-AIR TEMPERATURE
2
15
IO – Output Current – mA
Figure 14
5
10
65
85 105 125
IO = 200 µA
IO = – 200 µA
14.5
14
IO = 2 mA
IO = – 2 mA
13.5
13
IO = 20 mA
12.5
IO = – 20 mA
12
11.5
11
10.5
VCC ± = ± 15 V
10
– 75 – 55 – 35 –15
TA – Free-Air Temperature – °C
5
25
45
65
85 105 125
TA – Free-Air Temperature – °C
Figure 16
Figure 17
† Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
5–23
TLE2071, TLE2071A, TLE2071Y
EXCALIBUR LOW-NOISE HIGH-SPEED
JFET-INPUT OPERATIONAL AMPLIFIERS
SLOS119A – JUNE 1993 – REVISED AUGUST 1994
TYPICAL CHARACTERISTICS†
MAXIMUM PEAK-TO-PEAK OUTPUT VOLTAGE
vs
FREQUENCY
V O(PP) – Maximum Peak-to-Peak Output Voltage – V
VO(PP)
MAXIMUM PEAK OUTPUT VOLTAGE
vs
SUPPLY VOLTAGE
VOM – Maximum Peak Output Voltage – V
V
OM
25
TA = 25°C
20
IO = – 200 µA
15
IO = – 2 mA
10
5
IO = – 20 mA
0
IO = 20 mA
–5
IO = 2 mA
–10
IO = 200 µA
–15
– 20
– 25
0
2.5
5
7.5
10 12.5 15 17.5 20 22.5 25
30
VCC ± = ± 15 V
RL = 2 kΩ
25
20
TA = – 55°C
15
TA = 25°C,
125°C
10
5
VCC ± = ± 5 V
TA = – 55°C
0
100 k
1M
f – Frequency – Hz
|VCC ± | – Supply Voltage – V
Figure 18
LARGE-SIGNAL DIFFERENTIAL
VOLTAGE AMPLIFICATION
vs
LOAD RESISTANCE
125
12.5
10
AVD – Large-Signal Differential
Voltage Amplification – dB
10 mV
7.5
1 mV
5
2.5
VCC ± = ± 15 V
RL = 1 kΩ
CL = 100 pF
AV = – 1
TA = 25°C
Rising
0
Falling
– 2.5
–5
1 mV
– 7.5
10 mV
– 12.5
0
0.5
120
VIC = 0
RS = 50 Ω
TA = 25°C
115
110
VCC ± = ± 15 V
105
VCC ± = ± 5 V
100
95
– 10
1
1.5
2
90
0.1
Settling Time – µs
1
10
RL – Load Resistance – kΩ
Figure 20
Figure 21
† Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.
5–24
10 M
Figure 19
OUTPUT VOLTAGE
vs
SETTLING TIME
VO
VO – Output Voltage – V
TA = 25°C,
125°C
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
100
TLE2071, TLE2071A, TLE2071Y
EXCALIBUR LOW-NOISE HIGH-SPEED
JFET-INPUT OPERATIONAL AMPLIFIERS
SLOS119A – JUNE 1993 – REVISED AUGUST 1994
TYPICAL CHARACTERISTICS†
LARGE-SIGNAL DIFFERENTIAL
VOLTAGE AMPLIFICATION
vs
FREE-AIR TEMPERATURE
LARGE-SIGNAL DIFFERENTIAL
VOLTAGE AMPLIFICATION
vs
FREE-AIR TEMPERATURE
125
110
ÁÁ
ÁÁ
ÁÁ
104
101
RL = 2 kΩ
98
95
92
89
86
83
VCC ± = ± 5 V
VO = ± 2.3 V
80
–75 – 55 – 35 –15
5
117
113
25
45
65
RL = 2 kΩ
109
105
101
ÁÁ
ÁÁ
ÁÁ
RL = 600 Ω
VCC ± = ± 15 V
VO = ± 10 V
RL = 10 kΩ
121
RL = 10 kΩ
AVD
A
VD – Large-Signal Differential
Voltage Amplification – dB
AVD
A
VD – Large-Signal Differential
Voltage Amplification – dB
107
RL = 600 Ω
97
93
89
85
–75 – 55 – 35 –15
85 105 125
5
25
45
65
85 105 125
TA – Free-Air Temperature – °C
TA – Free-Air Temperature – °C
Figure 22
Figure 23
SMALL-SIGNAL DIFFERENTIAL VOLTAGE
AMPLIFICATION AND PHASE SHIFT
vs
FREQUENCY
140
VCC ± = ± 15 V
RL = 2 kΩ
CL = 100 pF
TA = 25°C
ÁÁ
ÁÁ
ÁÁ
Gain
100
80
20°
40°
60°
Phase Shift
60
80°
40
100°
20
120°
0
140°
– 20
160°
Phase Shift
AVD
A
VD – Small-Signal Differential
Voltage Amplification – dB
120
0°
180°
– 40
1
10
100
1k
10 k 100 k 1 M
10 M 100 M
f – Frequency – Hz
Figure 24
† Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
5–25
TLE2071, TLE2071A, TLE2071Y
EXCALIBUR LOW-NOISE HIGH-SPEED
JFET-INPUT OPERATIONAL AMPLIFIERS
SLOS119A – JUNE 1993 – REVISED AUGUST 1994
TYPICAL CHARACTERISTICS†
SMALL-SIGNAL DIFFERENTIAL VOLTAGE
AMPLIFICATION AND PHASE SHIFT
vs
FREQUENCY
30
80°
Phase Shift
20
100°
CL = 25 pF
10
120°
Gain
ÁÁ
ÁÁ
ÁÁ
0
140°
Phase Shift
AVD
A
VD – Small-Signal Differential
Voltage Amplification – dB
CL = 100 pF
CL = 100 pF
VCC ± = ± 15 V
VIC = 0
RC = 2 kΩ
TA = 25°C
– 10
CL = 25 pF
180°
100
– 20
1
4
10
160°
40
f – Frequency – MHz
Figure 25
COMMON-MODE REJECTION RATIO
vs
FREQUENCY
COMMON-MODE REJECTION RATIO
vs
FREE-AIR TEMPERATURE
100
CMRR – Common-Mode Rejection Ratio – dB
CMRR – Common-Mode Rejection Ratio – dB
100
VCC ± = ± 15 V
90
80
VCC ± = ± 5 V
70
60
50
40
30
VIC = 0
VO = 0
RS = 50 Ω
TA = 25°C
20
10
0
10
100
1k
10 k
100 k
1M
10 M
97
VCC ± = ± 15 V
94
91
88
VCC ± = ± 5 V
85
82
79
76
73
VIC = VICRmin
VO = 0
RS = 50 Ω
70
–75 – 55 – 35 –15
5
25
45
65
85 105 125
TA – Free-Air Temperature – °C
f – Frequency – Hz
Figure 26
Figure 27
† Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.
5–26
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
TLE2071, TLE2071A, TLE2071Y
EXCALIBUR LOW-NOISE HIGH-SPEED
JFET-INPUT OPERATIONAL AMPLIFIERS
SLOS119A – JUNE 1993 – REVISED AUGUST 1994
TYPICAL CHARACTERISTICS†
SUPPLY-VOLTAGE REJECTION RATIO
vs
FREQUENCY
SUPPLY-VOLTAGE REJECTION RATIO
vs
FREE-AIR TEMPERATURE
120
kXXXX
SVR – Supply-Voltage Rejection Ratio – dB
kXXXX
SVR – Supply-Voltage Rejection Ratio – dB
120
kSVR +
100
80
60
kSVR –
40
∆ VCC ± = ± 5 V to ± 15 V
VIC = 0
VO = 0
RS = 50 Ω
TA = 25°C
20
0
– 20
10
100
1k
10 k
100 k
1M
114
kSVR +
108
102
96
90
kSVR –
84
78
72
66
∆ VCC ± = ± 5 V to ± 15 V
VIC = 0
VO = 0
RS = 50 Ω
60
–75 – 55 – 35 –15
10 M
Figure 28
25
45
65
85 105 125
Figure 29
SUPPLY CURRENT
vs
SUPPLY VOLTAGE
SUPPLY CURRENT
vs
FREE-AIR TEMPERATURE
4
4
VIC = 0
VO = 0
No Load
3.6
3.6
VIC = 0
VO = 0
No Load
3.2
2.8
IICC
CC – Supply Current – mA
3.2
IICC
CC – Supply Current – mA
5
TA – Free-Air Temperature – °C
f – Frequency – Hz
TA = 25°C
2.4
TA = 125°C
2
1.6
TA = – 55°C
1.2
2.8
2.4
1.6
0.8
0.4
0.4
0
2
4
6
8
10
12
14
16
18
20
VCC ± = ± 5 V
1.2
0.8
0
VCC ± = ± 15 V
2
0
–75 – 55 – 35 –15
5
25
45
65
85 105 125
TA – Free-Air Temperature – °C
|VCC ±| – Supply Voltage – V
Figure 30
Figure 31
† Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
5–27
TLE2071, TLE2071A, TLE2071Y
EXCALIBUR LOW-NOISE HIGH-SPEED
JFET-INPUT OPERATIONAL AMPLIFIERS
SLOS119A – JUNE 1993 – REVISED AUGUST 1994
TYPICAL CHARACTERISTICS
SUPPLY CURRENT
vs
DIFFERENTIAL INPUT VOLTAGE
SUPPLY CURRENT
vs
DIFFERENTIAL INPUT VOLTAGE
12
8
VCC ± = ± 15 V
VIC = 0
TA = 25°C
Open Loop
No Load
23
20
IICC
CC – Supply Current – mA
10
IICC
CC – Supply Current – mA
25
VCC + = 5 V
VCC – = 0
VIC = 4.5 V
TA = 25°C
Open Loop
No Load
6
4
18
15
13
10
8
5
2
3
0
– 0.5
– 0.25
0
0.25
0
–1.5
0.5
– 0.9
VID – Differential Input Voltage – V
Figure 32
48
40
VID = – 1 V
24
12
VO = 0
TA = 25°C
–12
– 24
VID = 1 V
– 48
IIOS
OS – Short-Circuit Output Current – mA
IIOS
OS – Short-Circuit Output Current – mA
50
– 36
0.9
1.5
VID = – 1 V
30
20
10
VCC ± = ± 15 V
VO = 0
TA = 25°C
0
–10
– 20
– 30
VID = 1 V
– 40
– 50
– 60
0
2.5
5
7.5
10 12.5 15 17.5 20 22.5 25
0
|VCC ± | – Supply Voltage – V
60
Figure 35
POST OFFICE BOX 655303
120
t – Elapsed Time – s
Figure 34
5–28
0.3
SHORT-CIRCUIT OUTPUT CURRENT
vs
TIME
60
0
0
Figure 33
SHORT-CIRCUIT OUTPUT CURRENT
vs
SUPPLY VOLTAGE
36
– 0.3
VID – Differential Input Voltage – V
• DALLAS, TEXAS 75265
180
TLE2071, TLE2071A, TLE2071Y
EXCALIBUR LOW-NOISE HIGH-SPEED
JFET-INPUT OPERATIONAL AMPLIFIERS
SLOS119A – JUNE 1993 – REVISED AUGUST 1994
TYPICAL CHARACTERISTICS†
SHORT-CIRCUIT OUTPUT CURRENT
vs
FREE-AIR TEMPERATURE
SLEW RATE
vs
FREE-AIR TEMPERATURE
45
64
43
VID = – 1 V
VCC ± = ± 15 V
48
32
VCC ± = ± 5 V
16
0
– 16
VCC ± = ± 5 V
VID = 1 V
– 32
VCC ± = ± 15 V
– 48
– 64
41
V/µ s
SR – Slew Rate – V/xs
IIOS
OS – Short-Circuit Output Current – mA
80
VCC ± = ± 5 V
RL = 2 kΩ
CL = 100 pF
39
SR –
37
35
SR +
33
31
29
27
VO = 0
– 80
–75 – 55 – 35 –15
5
25
45
65
25
–75 – 55 – 35 –15
85 105 125
TA – Free-Air Temperature – °C
Figure 36
65
85 105 125
50
VCC ± = ± 15 V
RL = 2 kΩ
CL = 100 pF
40
Rising Edge
30
SR – Slew Rate – V/µ s
SR – Slew Rate – V/µ s
45
SLEW RATE
vs
LOAD RESISTANCE
70
62
25
Figure 37
SLEW RATE
vs
FREE-AIR TEMPERATURE
66
5
TA – Free-Air Temperature – °C
58
54
50
SR –
46
SR +
42
20
10
VCC ± = ± 5 V
VO ± = ± 2.5 V
0
–10
AV = – 1
CL = 100 pF
TA = 25°C
– 20
38
– 30
34
– 40
30
–75 – 55 – 35 –15
Falling Edge
– 50
100
1k
5
25
45
65
85 105 125
VCC ± = ± 15 V
VO ± = ± 10 V
TA – Free-Air Temperature – °C
10 k
100 k
RL – Load Resistance – Ω
Figure 38
Figure 39
† Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
5–29
TLE2071, TLE2071A, TLE2071Y
EXCALIBUR LOW-NOISE HIGH-SPEED
JFET-INPUT OPERATIONAL AMPLIFIERS
SLOS119A – JUNE 1993 – REVISED AUGUST 1994
TYPICAL CHARACTERISTICS
INPUT-REFERRED NOISE VOLTAGE
SPECTRAL DENSITY
vs
FREQUENCY
SLEW RATE
vs
DIFFERENTIAL INPUT VOLTAGE
50
50
Hz
AV = – 1
SR – Slew Rate – V/µ s
30
V n – Equivalent Input Noise Voltage – nV/
Vn
40
AV = 1
Rising Edge
20
VCC ± = ± 15 V
VO ± = ± 10 V (10% – 90%)
CL = 100 pF
TA = 25°C
10
0
–10
– 20
Falling Edge
– 30
AV = – 1
– 40
AV = 1
– 50
0.1
0.4
1
4
VCC ± = ± 15 V
VIC = 0
RS = 20 Ω
TA = 25°C
45
40
35
30
25
20
15
10
5
0
10
10
100
Figure 40
1.2
Vn – Input-Referred Noise Voltage – µV
Vn
Vn – Input-Referred Noise Voltage – µV
Vn
INPUT-REFERRED NOISE VOLTAGE
OVER A 10-SECOND TIME INTERVAL
VCC ± = ± 15 V
VIC = 0
RS = 20 Ω
TA = 25°C
10
Peak-to-Peak
1
RMS
0.1
0.01
0.9
VCC ± = ± 15 V
f = 0.1 to 10 Hz
TA = 25°C
0.6
0.3
0
– 0.3
– 0.6
1
10
100
1k
10 k
100 k
0
1
2
3
4
5
Figure 42
Figure 43
POST OFFICE BOX 655303
6
t – Time – s
Noise Bandwidth – Hz
5–30
10 k
Figure 41
INPUT-REFERRED NOISE VOLTAGE
vs
NOISE BANDWIDTH
100
1k
f – Frequency – Hz
VID – Differential Input Voltage – V
• DALLAS, TEXAS 75265
7
8
9
10
TLE2071, TLE2071A, TLE2071Y
EXCALIBUR LOW-NOISE HIGH-SPEED
JFET-INPUT OPERATIONAL AMPLIFIERS
SLOS119A – JUNE 1993 – REVISED AUGUST 1994
TYPICAL CHARACTERISTICS
TOTAL HARMONIC DISTORTION PLUS
NOISE
vs
FREQUENCY
THIRD-OCTAVE SPECTRAL NOISE DENSITY
vs
FREQUENCY BANDS
THD + N – Total Harmonic Distortion + Noise – %
Third-Octave Spectral Noise Density – dB
– 75
Start Frequency: 12.5 Hz
Stop Frequency: 20 kHz
VCC ± = ± 15 V
VIC = 0
TA = 25°C
– 80
– 85
– 90
– 95
–100
–105
–110
–115
10
15
20
25
30
40
35
45
1
AV = 100, RL = 600 Ω
0.1
AV = 100, RL = 2 kΩ
AV = 10, RL = 600 Ω
AV = 10, RL = 2 kΩ
0.01
0.001
10
VCC ± = ± 5 V
VO(PP) = 5 V
TA = 25°C
Filter: 10-Hz to 500-kHz Band Pass
100
Frequency Bands
13
Filter: 10-Hz to 500-kHz Band Pass
VCC ± = ± 15 V
VO(PP) = 20 V
TA = 25°C
B1
B1 – Unity-Gain Bandwidth – MHz
THD + N – Total Harmonic Distortion + Noise – %
UNITY-GAIN BANDWIDTH
vs
LOAD CAPACITANCE
1
AV = 100, RL = 600 Ω
AV = 100, RL = 2 kΩ
AV = 10, RL = 600 Ω
AV = 10, RL = 2 kΩ
0.001
10
100 k
Figure 45
TOTAL HARMONIC DISTORTION PLUS NOISE
vs
FREQUENCY
0.01
10 k
f – Frequency – Hz
Figure 44
0.1
1k
VCC ± = ± 15 V
VIC = 0
VO = 0
RL = 2 kΩ
TA = 25°C
12
11
10
9
8
7
100
1k
10 k
100 k
0
f – Frequency – Hz
20
40
60
80
100
CL – Load Capacitance – pF
Figure 46
Figure 47
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
5–31
TLE2071, TLE2071A, TLE2071Y
EXCALIBUR LOW-NOISE HIGH-SPEED
JFET-INPUT OPERATIONAL AMPLIFIERS
SLOS119A – JUNE 1993 – REVISED AUGUST 1994
TYPICAL CHARACTERISTICS†
GAIN-BANDWIDTH PRODUCT
vs
FREE-AIR TEMPERATURE
GAIN-BANDWIDTH PRODUCT
vs
SUPPLY VOLTAGE
13
f = 100 kHz
VIC = 0
VO = 0
RL = 2 kΩ
CL = 100 pF
12
Gain-Bandwidth Product – MHz
Gain-Bandwidth Product – MHz
13
11
VCC ± = ± 15 V
10
9
VCC ± = ± 5 V
8
7
–75 – 55 – 35 –15
f = 100 kHz
VIC = 0
VO = 0
RL = 2 kΩ
CL = 100 pF
TA = 25°C
12
11
10
9
8
7
5
25
45
65
85 105 125
0
5
TA – Free-Air Temperature – °C
Figure 48
20
25
PHASE MARGIN
vs
FREE-AIR TEMPERATURE
10
90°
VCC ± = ± 15 V
VIC = 0
VO = 0
RL = 2 kΩ
TA = 25°C
80°
VIC = 0
VO = 0
RL = 2 kΩ
70°
φ m – Phase Margin
xm
Gain Margin – dB
15
Figure 49
GAIN MARGIN
vs
LOAD CAPACITANCE
8
10
VCC +± | – Supply Voltage – V
|VCC
6
4
VCC ± = ± 15 V
CL = 25 pF
60°
VCC ± = ± 5 V
50°
VCC ± = ± 15 V
40°
30°
CL = 100 pF
VCC ± = ± 5 V
20°
2
10°
0
0
20
40
60
80
100
0°
–75 – 55 – 35 –15
5
25
45
65
85 105 125
TA – Free-Air Temperature – °C
CL – Load Capacitance – pF
Figure 50
Figure 51
† Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.
5–32
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
TLE2071, TLE2071A, TLE2071Y
EXCALIBUR LOW-NOISE HIGH-SPEED
JFET-INPUT OPERATIONAL AMPLIFIERS
SLOS119A – JUNE 1993 – REVISED AUGUST 1994
TYPICAL CHARACTERISTICS
PHASE MARGIN
vs
SUPPLY VOLTAGE
PHASE MARGIN
vs
LOAD CAPACITANCE
90°
90°
80°
80°
70°
CL = 25 pF
60°
xm
φ m – Phase Margin
φ m – Phase Margin
xm
70°
50°
CL = 100 pF
40°
30°
VIC = 0
VO = 0
RL = 2 kΩ
TA = 25°C
20°
10°
60°
VCC ± = ± 15 V
50°
VCC ± = ± 5 V
40°
30°
VIC = 0
VO = 0
RL = 2 kΩ
TA = 25°C
20°
10°
0°
0°
0
4
8
12
16
20
0
20
|VCC ±| – Supply Voltage – V
40
60
80
100
CL – Load Capacitance – pF
Figure 52
Figure 53
NONINVERTING LARGE-SIGNAL
PULSE RESPONSE
SMALL-SIGNAL PULSE RESPONSE
100
15
TA = 25°C,
125°C
VO
VO – Output Voltage – mV
VO
VO – Output Voltage – V
10
TA = – 55°C
5
TA = – 55°C
0
TA = 25°C,
125°C
–5
VCC ± = ± 15 V
AV = 1
RL = 2 kΩ
CL = 100 pF
– 10
– 15
50
0
VCC ± = ± 15 V
AV = – 1
RL = 2 kΩ
CL = 100 pF
TA = 25°C
– 50
–100
0
1
2
3
t – Time – µs
4
5
0
Figure 54
0.4
0.8
t – Time – µs
1.2
1.6
Figure 55
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
5–33
TLE2071, TLE2071A, TLE2071Y
EXCALIBUR LOW-NOISE HIGH-SPEED
JFET-INPUT OPERATIONAL AMPLIFIERS
SLOS119A – JUNE 1993 – REVISED AUGUST 1994
TYPICAL CHARACTERISTICS
CLOSED-LOOP OUTPUT IMPEDANCE
vs
FREQUENCY
zo – Closed-Loop Output Impedance – Ω
zo
X
100
VCC ± = ± 15 V
TA = 25°C
10
1
AV = 100
0.1
AV = 10
0.01
AV = 1
0.001
10
100
1k
10 k
100 k
1M
f – Frequency – Hz
Figure 56
5–34
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
10 M
TLE2071, TLE2071A, TLE2071Y
EXCALIBUR LOW-NOISE HIGH-SPEED
JFET-INPUT OPERATIONAL AMPLIFIERS
SLOS119A – JUNE 1993 – REVISED AUGUST 1994
APPLICATION INFORMATION
macromodel information
Macromodel information provided was derived using PSpice Parts model generation software. The Boyle
macromodel (see Note 4) and subcircuit in Figure 57 were generated using the TLE2071 typical electrical and
operating characteristics at TA = 25°C. Using this information, output simulations of the following key parameters
can be generated to a tolerance of 20% (in most cases):
•
•
•
•
•
•
•
•
•
•
•
•
Maximum positive output voltage swing
Maximum negative output voltage swing
Slew rate
Quiescent power dissipation
Input bias current
Open-loop voltage amplification
Unity-gain frequency
Common-mode rejection ratio
Phase margin
DC output resistance
AC output resistance
Short-circuit output current limit
NOTE 4: G.R. Boyle, B.M. Cohn, D. O. Pederson, and J. E. Solomon, “Macromodeling of Integrated Circuit Operational Amplifiers”, IEEE Journal
of Solid-State Circuits, SC-9, 353 (1974).
99
3
VCC +
EGND +
9
RSS
+
ISS
92
FB
+
10
IN –
J1
DP
VC
J2
IN+
11
R2
–
53
DC
12
HLIM
–
C2
6
VCC –
54
4
–
–
–
–
+
VIN
+
GCM
GA
VLIM
8
RD2
91
+
VIP
7
C1
RD1
+ DIP
90
RO2
VB
RP
2
1
–
DIN
–
RO1
DE
5
+
VE
OUT
R2
6
9
100.0E3
RD1 4
11
3.003E3
RD2 4
12
3.003E3
R01 8
5
80
R02 7
99
80
RP
3
4
27.30E3
RSS 10 99
500.0E3
VB
9
0
DC 0
VC
3
53
DC 2.20
VE
54
4
DC 2.20
VLIM 7
8
DC 0
VLP 91
0
DC 45
VLN 0
92
DC 45
.MODEL DX D (IS=800.0E–18)
.MODEL JX PJF (IS=15.00E–12 BETA=554.5E–6
+ VTO=–.6)
.ENDS
.SUBCKT TLE2071 1 2 3 4 5
C1
11
12
2.2E–12
C2
6
7
10.00E–12
DC
5
53
DX
DE
54
5
DX
DLP 90 91
DX
DLN 92 90
DX
DP
4
3
DX
EGND 99
0
POLY (2) (3,0) (4,0) 0 .5 .5
FB
7
99
POLY (5) VB VC VE VLP VLN 0
+ 5.607E6 –6E6 6E6 6E6 –6E6
GA
6
0
11 12 333.0E–6
GCM 0
6
10 99 7.43E–9
ISS
3
10
DC 400.0E–6
HLIM 90
0
VLIM 1K
J1
11
2
10 JX
J2
12
1
10 JX
Figure 57. Boyle Macromodel and Subcircuit
PSpice and Parts are registered trademarks of MicroSim Corporation.
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
5–35
TLE2071, TLE2071A, TLE2071Y
EXCALIBUR LOW-NOISE HIGH-SPEED
JFET-INPUT OPERATIONAL AMPLIFIERS
SLOS119A – JUNE 1993 – REVISED AUGUST 1994
5–36
POST OFFICE BOX 655303
• DALLAS, TEXAS 75265
IMPORTANT NOTICE
Texas Instruments (TI) reserves the right to make changes to its products or to discontinue any semiconductor
product or service without notice, and advises its customers to obtain the latest version of relevant information
to verify, before placing orders, that the information being relied on is current.
TI warrants performance of its semiconductor products and related software to the specifications applicable at
the time of sale in accordance with TI’s standard warranty. Testing and other quality control techniques are
utilized to the extent TI deems necessary to support this warranty. Specific testing of all parameters of each
device is not necessarily performed, except those mandated by government requirements.
Certain applications using semiconductor products may involve potential risks of death, personal injury, or
severe property or environmental damage (“Critical Applications”).
TI SEMICONDUCTOR PRODUCTS ARE NOT DESIGNED, INTENDED, AUTHORIZED, OR WARRANTED
TO BE SUITABLE FOR USE IN LIFE-SUPPORT APPLICATIONS, DEVICES OR SYSTEMS OR OTHER
CRITICAL APPLICATIONS.
Inclusion of TI products in such applications is understood to be fully at the risk of the customer. Use of TI
products in such applications requires the written approval of an appropriate TI officer. Questions concerning
potential risk applications should be directed to TI through a local SC sales office.
In order to minimize risks associated with the customer’s applications, adequate design and operating
safeguards should be provided by the customer to minimize inherent or procedural hazards.
TI assumes no liability for applications assistance, customer product design, software performance, or
infringement of patents or services described herein. Nor does TI warrant or represent that any license, either
express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property
right of TI covering or relating to any combination, machine, or process in which such semiconductor products
or services might be or are used.
Copyright  1995, Texas Instruments Incorporated