1
CV: Col (Retd) Aditya Parida, PhD
Name
Home address
Aditya Parida
Kvartsstigen 10
97753 Luleå
0920-97190
Aditya.parida@ltu.se
Telephone number
e-Mail address
Current employment
Assistant Professor/Senior
Technology, Since 2002
Lecturer-
Luleå
University
of
Previous employment
2001-2002 Joint Director, Northern Institute for Integrated Learning in
Management, New Delhi
1996-2001 Visiting Professor/Faculty (25%), for Production and Operation/Maintenance
Engineering, and Management, at:
- Institute of Integrated Learning in Management, New-Delhi
- Institute of Management Technology, and
- Birla Institute Management and Technology, New Delhi, India
2000-2001
Advisor-Business development, Mokul International, New Delhi
1995-2000
Director/Senior Consultant, Technology and Management Consultants,
New Delhi, in Collaboration with IIT Kharagpur, India
1992-1995
Indian Army, Director, Implementation, Monitoring and Control;
Management studies, General Staff Branch, Army HQs, New-Delhi,
1973-1992
Engineer & Manager of Light Workshop, Field Workshop, Recovery
Company, and Intermediate workshops (Operation and Maintenance) of
Corps of Electronics and Mechanical Engineers; and
Manager, Engine shop, Purchase Officer, Production planning &
Controller of Army Base workshop of Corps of Electronics and
Mechanical Engineers, of the Indian Army.
DEGREES AND APPRAISALS
University degrees
PhD: 2006:37 of LTU. Development of a Multi-criteria Hierarchical Framework
for Maintenance Performance Measurement: Concepts, Issues and
Challenges
M Sc: Armament & Instrumentation Engineering, M S University, India, 1990,
M Tech: Industrial Engineering & Management, Indian Institute of Technology
(IIT), Kharagpur, India, 1986. 8.62 CGPA
B Sc Engineering (Mechanical): Sambalpur University, India, 1972.
Associate Professor qualification:
Docent Course from Luleå University of Technology
Appraisals of own scientific work
- Outstanding paper award-2008: Journal of Quality in Maintenance Engineering
from Emerald Group of Publishers
- Three book chapters on Asset, Maintenance and Productivity Performance
Measurements Published by Springer’s, UK, 2008, 2009 & 2010.
2
Others
- Guest editor, International Journal of Perfomability (Special issue)
Scheduled in Mar’2011
- Guest Editor, Journal of Quality in Maintenance Engineering (Special Issue),
Vol. 15, Number 2, 2009
- Editor, Proceedings of 1st International eMaintenance 2010
- Editor, Proceedings of 19th International Congress of COMADEM, 2006
Publication list
Peer-reviewed publication in International journals
1. Parida, A (2010), Condition monitoring and performance assessment issues in mining
industry, Accepted for International Journal of Condition Monitoring and Diagnostic
Engineering management, ISSN 1363-7681, October issue
2. Parida, A; Berglund, F and Nordström, J (2010), NDT methods for detection and
monitoring of fatigue cracks in mining mills, Accepted for International Journal of
Condition Monitoring and Diagnostic Engineering management, ISSN 1363-7681,
October issue
3. Parida, A and Uday, K (2009), Maintenance Performance Measurement-Methods,
Tools and Application, MaintWorld, Volume 1, Issue 1, pp. 50-53
4. Karim, R and Parida, A (2010), eMaintenance Readiness of Swedish Process
Industry: A Case Study, Accepted for International Journal of Condition Monitoring
and Diagnostic Engineering management, ISSN 1363-7681, July issue
5. Nissen, A; Parida, A and Kumar, U (2010), Condition Monitoring of Railway
Switches and Crossing by using Data from Track Recording Cars, Accepted for
International Journal of Condition Monitoring and Diagnostic Engineering
management, July issue, ISSN 1363-7681
6. Lundberg, J, Parida, A and Söderholm, P (2010), Running temperature and
mechanical stability of greases as maintenance parameters of railway bearings,
International Journal of Automation and Computing,7, (2), pp. 1476-1486
7. Ahren, T and Parida, A (2009), Overall railway infrastructure effectiveness (ORIE): a
case study on the Swedish rail network, Journal of Quality in Maintenance
Engineering, 15:1, 17-30.
8. Ahren, T and Parida, A (2009), Maintenance performance indicators (MPI) for
benchmarking the railway infrastructure- a case study, Benchmarking: an
International Journal 16:2, 247-258 (50% Involved in conceptualisation, discussion,
structuring and editing)
9. Dandotiya, R, Lundberg, J and Parida, A, (2010),Evaluation of abrasive wear
measurement devices of mill liners, Accepted for International Journal of Condition
Monitoring and Diagnostic Engineering management, ISSN 1363-7681, October issue
10. Dandotiya, R; Banerjee, R. N; Ghodrati, B and Parida, A, (2010), Optimal pricing and
terminal location for a rail-truck intermodal service – a case study, International
Journal of Logistics – Accepted: ID CJOL-2008-0009.R2
11. Parida, A and Chattopadhyay, G. (2007), Development of Multi-Criteria Hierarchical
framework for Maintenance Performance Measurement (MPM). Journal of Quality in
Maintenance Engineering, Vol. 13, No. 3, pp 241-258
12. Parida, A (2007), Study and analysis of Maintenance Performance Indicators (MPIs)
for LKAB: A Case Study. Journal of Quality in Maintenance Engineering, Vol. 13,
No.4, pp. 325-337
3
13. Parida, A and Kumar, U. (2006), Maintenance Performance Measurement (MPM):
Issues and Challenges. Journal of Quality in Maintenance Engineering, Volume 12,
Number 3, pp. 239-251
14. Parida, A (2006), Maintenance Performance Measurement system: Application of
ICT and e-Maintenance Concepts. (2006). International Journal of Condition
Monitoring and Diagnostic Engineering management, ISSN 1363-7681. 9 (4), pp.
30-34
Conference and Congress Publications
15. Parida, A; Chattopadhyaya, G and Kumar, U (2010), Performance measures for
Achieving asset capability improvement, 23rd International Congress of Condition
Monitoring and Diagnostic Engineering management, June 28-02 Jul, Nara, Japan, pp.
89-94
16. Chattopadhyay, G and Parida, A (2010), Work integrated blended learning for
improvement by asset managers, 23rd International Congress of Condition
Monitoring and Diagnostic Engineering management, June 28-02 Jul, Nara, Japan, pp.
95-101
17. Sahoo, T and Parida, A (2010), Improving Overall Equipment Effectiveness (OEE) of
process plant equipments through e-Diagnostics, Accepted for the Proceedings of
eMaintenance 2010, 22-24 June, Luleå, pp. 115-120
18. Larsson, M; Parida, A and Danditiya, R (2010), Development of a decision
optimisation model for aircraft workshop capacity, Proceedings of eMaintenance
2010, 22-24 June, Luleå, pp. 121-126
19. Biswal, M and Parida, A (2010), An integrated approach for open e-Maintenance:
Opportunities and challenges, Proceedings of eMaintenance 2010, 22-24 June, Luleå,
pp. 107-114
20. Ismail, S; Sarangi, M; Parida, A and Kumar, U (2010), Root cause failure analysis of
coal mill vertical shaft, Proceedings of eMaintenance 2010, 22-24 June, Luleå, pp.
176-181
21. Parida, A and Kumar, U (2010), Strategic issues in engineering asset performance
measurement, Proceedings of EUROMAINTENANCE2010, 12-14 May, Verona, Italy,
pp.
22. Parida, A and Kumar, U (2009), Integrated strategic asset performance assessment,
Proceedings of World Congress of Engineering and Asset Management, Athens,
Greece, 28-30 Sep 2009, pp.369-371
23. Parida, A (2009), Condition Monitoring issues of Engineering Asset - a need for
Performance Assessment, Proceedings of 22nd International Congress of Condition
Monitoring and Diagnostic Engineering management, June 09-11, Spain, pp. 681-689
24. J, Nordström; A, Parida; R, Dandotiya and J, Lundberg (2009), Crack detection methods
for Mining Mill Machinery, Proceedings of 22nd International Congress of Condition
Monitoring and Diagnostic Engineering management, June 09-11, Spain, pp.313-321
25. R, Dandotiya; J, Lundberg, A, Parida and J, Nordström (2009), A Systematic Evaluation
of Devices for Measuring Abrasive Wear of Mill Liners, Proceedings of 22nd
International Congress of Condition Monitoring and Diagnostic Engineering
management, June 09-11, Spain, pp. 419-427
26. Parida, A (2008),Maintenance Performance Assessment (MPA) framework for
Engineering Asset, Proceedings of IEEE International Conference on Industrial
Engineering and Engineering Management, Singapore, 08-11 December 2008, pp.
1351-1354.
4
27. Gustafson, A; Parida, A and Nissen, A (2008), Optimizing productivity through
performance measures for underground mining industry, Proceedings of 5th
MASSMIN Conference 2008, 08-11 June, Luleå, Sweden, pp. 371-378
28. Parida, A (2008), Relevant health monitoring based maintenance for an effective
strategic engineering asset management, Proceedings of 21st International Congress of
Condition Monitoring and Diagnostic Engineering management 2008, June 11-13,
Prague, Czech Republic
29. Parida, A and Söderholm, P (2007), e-Maintenance as a contributing solution to the
No Fault Found (NFF), Proceedings of 3rd International Conference on Reliability and
Safety Engineering (INCRESE2007), December 17-19, 2007, Udaipur, India
30. Parida, A (2007), Role of condition monitoring and performance measurement in
asset productivity enhancement, Proceedings of the 20th International Congress of
Condition Monitoring and Diagnostic Engineering management, 12-15 Jun, Faro,
Portugal, pp 525-531
31. Johansson, A, OE and Parida, A (2007), Process IT innovation in maintenance
management to boost the competitiveness of European Process Industries, eProceedings of Second World Congress on Engineering Asset Management and
Fourth International Conference on Condition Monitoring, 11-14 June, Harrogate, UK
32. Parida, A (2006), Operational performance measurement: issues and challenges,
Proceedings of the 7th Asian Pacific Industrial Engineering and Management Systems
Conference, paper 226 of the e-proceedings
33. Puhan, S and Parida, A (2006).Maintenance management systems using balanced
scorecard (BSC) approach, Proceedings of the 19th International Congress of
Condition Monitoring and Diagnostic Engineering management, 12-15 Jun, Luleå,
Sweden, pp. 409-415.
34. Kumar, U and Parida, A (2006), Maintenance Performance Measurement: The need
of the hour for the mechanized mining industry. Proceedings of the 1st Asian Mining
Congress, 16-18 Jan 2006, Kolkatta, India.
35. Wiksten, J; Johansson, M; Viklund, J and Parida, A (2006), Automation of turbine
engine trend analysis, Proceedings of the 19th International Congress of Condition
Monitoring and Diagnostic Engineering management, 12-15 Jun, Luleå, Sweden, pp.
67-75.
36. Parida, A; Chattopadhyay, G and Kumar, U (2005), Multi-criteria Maintenance
Performance Measurement: A conceptual model. Proceedings of the 18th International
Congress of Condition Monitoring and Diagnostic Engineering management, 31st
Aug-2nd Sep, Cranfield, UK, pp. 349-356.
37. Parida, A; Phanse, K and Kumar, U (2004), An integrated approach to design and
development of e-maintenance system. VETOMAC-3 and ACSIM-2004, New-Delhi,
Dec 6-9, pp. 1141-1147.
38. Parida, A and Kumar, U (2004), Managing information is key to maintenance
effectiveness, Published in the e-Proceedings of the Intelligent Maintenance System’s
(IMS), 2004, July 15-17, 2004, Arles, France.
39. Söderholm, P and Parida, A (2004), Health management of complex technical
systems. Proceedings of the 17th International Congress of Condition Monitoring and
Diagnostic Engineering management, 23-25 Aug, Cambridge, UK, pp. 214-221.
40. Parida, A and Kumar, U (2004), E-Maintenance for equipments effectiveness in
Mining and Mineral based Industry, Proceedings of 13th International Symposium on
Mine Planning and Equipment Selection, 2004, Sep 01-03, Wroclow, Poland, pp. 475478.
5
41. Parida, A and Kumar, U (2004), Measurement of environmental management
system’s effectiveness, Proceedings of 8th SWEMP 2004, Turkey.
42. Parida, A and Kumar, U (2004), Application of Overall Equipment Effectiveness
(OEE) as a Process Performance Indicator: A case study from Kiruna Mines,
Proceedings of ENTMS 2004, Bhubaneswar, India, 11-12 May, pp. 32-35
43. Parida, A; Johansson, D and Edelman, M (2004), Success of Reliability Centered
Maintenance (RCM) lies in its implementation: a case study, Euromaintenance 2004,
Barcelona, Spain, pp. 229-236
44. Parida, A; Åhren, T and Kumar, U (2003), Integrating maintenance Performance with
Corporate Balanced Scorecard”, Proceedings of the 16th International Congress, 27-29
Aug 2003,Växjö, Sweden, pp 53-59
45. Parida, A (1999) Management education for the third millennium: prospects and
challenges, , 10th All India Management Congress, 29-30 May 1999. IIBM, Patna,
India (pp 21-22).
46. Parida, A and Rawat, R, S (1994), Value based leadership styles, Research project
reports of Mgt Studies/ MST(C), dated 12 Feb 1993, at Army Headquarters, India
47. Jamwal, M. S and Parida, A (1993),Fuel, Oil and Lubricant scale for Organizations,
Research project reports of Mgt Studies/MST(C), dated 08 Nov 1991, at Army
Headquarters, India
48. Parida, A (1987), Design and development of a management Information system for a
purchase Department, Proceedings of 29th National Convention of Indian Institution
of Industrial Engineering, 30 Jan - 01 Feb 1987, Calcutta, India, (pp 46-49).
Books, Book Chapters and conference proceedings
1. Book: Performance Measurement for maintenance: A multi-criteria hierarchical
approach (2009), LAP Lambert Academic Publishing, ISBN: 978-3-8383-0863-0
2. Book: Career Excellence (2003), paper back, Publisher: Dynamic Publications (India)
Ltd
3. Author of chapter on “Asset Performance Measurement” in Asset Management – The
state of the art in Europe, edited by Telli van der Kei, Ype Wijnia and Paulien Herder,
MIT Press (Accepted, 2011)
4. Co-author of chapter on “ Maintenance productivity and performance measurement”
in the handbook of Maintenance Management & Engineering, Edited by Professor
Salih O Duffuaa & others, Springer, UK (2009)
5. Co-author of Chapter 19 of the book Maintenance of Complex system, Edited by
Professors DNP Murthy and Khairy Kobbacy, Springer, UK on “Maintenance
performance measurement system” (2008)
6. Co-editor, Proceedings of 1st Internal Congress on eMaintenance 2010.
7. Co-editor, Proceedings of 19th International Congress of Condition Monitoring and
Diagnostic Engineering management, 2006
6
Granted funding
Research council funding
a) Co-Project leader of VINNOVA research project on “Increased production
systems effectiveness through condition monitoring and prognostics” 2008-2012
(11.4 million SEK). The purpose of this study is to minimise the risk of damage
and increase the effectiveness of LKAB’s mining production system through
monitoring of fatigue crack in mining mills and similar machineries.
b) Co-applicant of SSF project on “Integrated maintenance for improved
production and products (InMaint) 2009-2012, involving companies like;
Sandvik, Boliden AB, Volvo amongst others in collaboration with Mälerdalen
University (11 Million SEK).
EU, foundation and other funding
a) Project leader, Link and effect model for effectiveness improvement, Banverket, 2010 –
2012, 2.1 million SEK. The aim of the project is to develop key values and monitoring
methods for RAMS and LCC in the railway maintenance infrastructure contracts, and develop
a link and effect model to measure and monitor changes that affect the operation of the assets.
b)
WP leader, Interreg IVA research (2009-2011) on “Improvement of regional
competitiveness through productivity development and research, for creating an eMaintenance cluster in the Bothnian Arc region for the process industries, suppliers and
SMEs, as also to develop a platform for the future European framework” of 0.55 million Euro
with KTUAS.
c) Project leader, Measurement of hard and soft parameters for the production and
maintenance process of the underground mine at LKAB Kiruna, May 2007-´Dec 2007, for
LKAB (0.65 million SEK). To study the production and maintenance process, of the chute
and track level, to suggest and subsequently to develop performance indicators (hard and soft
parameters) for the underground mine of LKAB Kiruna, facilitating to achieve the target
production of 30.6 million ton of iron ore by the end of 2009
d) Project leader, “study on implementation of e-Maintenance concept to enhance
effectiveness and efficiency of production system for Swedish and Finnish process industry”,
Mar –Oct 2007 (0.4 million SEK). The aim of this study was to examine the possibilities of
implementing an e-Maintenance concept to enhance the effectiveness and efficiency of
maintenance function, so as to identify its potential, problems and challenges in its
implementation and suggest a road map to implement this concept for the selected Swedish
and Finnish process industries.
e) Project leader, “Development of maintenance performance indicators for a pelletization
plant at LKAB” April 2005-March 2006 for LKAB (0.7 million SEK). The aim of the project
was to study the maintenance stops in the balling area of KK3 plant of LKAB to develop
maintenance indicators linking to improvement in production rate (speed) and product yield
(quality).
f) Project leader, “Study, analyze and identify maintenance performance indicators (MPI) for
Vattenfall Service AB” July –Oct 2006 (0.35 million SEK). The aim of this project was to
understand and analyze the maintenance process and function in order to identify possible
Key Performance Indicator (KPI) or Maintenance Performance Indicators (MPI) appropriate
to the operations/services of Vattenfall AB.
7
Other scientific qualification national and international conferences over the past five
years
a) Member, International Scientific Committee:
1. 24th International Congress of Condition Monitoring and Diagnostic Engineering
management 2011, 30 May - 01 June, Stavanger, Norway
2. Member, Technical Committee, 2nd International Conference on Reliability, Safety
and Hazard- Risk Based Technologies and Physics of Failure Methods (INCRESH),
December 14-16, 2010, Mumbai, India
3. International Committee Member of 1st IFAC Workshop on Advanced Maintenance
Engineering, Services and Technology, 2-4 July 2010, Lisbon, Portugal
4. International Committee Member, 1st International Workshop and Congress on
eMaintenance 2010, 22-24 June 2010 at Luleå.
5. IEEE International Conference on Industrial Engineering and Engineering
Management, 07-11 Dec 2010, Macau
6. 23rd International Congress of Condition Monitoring and Diagnostic Engineering
management 2010, June 28-July 02, Nara, Japan
7. IEEE International Conference on Industrial Engineering and Engineering
Management, 08-11 Dec 2009, Hong Kong
8. 11th International Conference on The Modern Information Technology in the
Innovation Processes of the Industrial Enterprises (MITIP 2009), 15-16 Oct 2009,
Bergamo, Italy
9. 22nd International Congress of Condition Monitoring and Diagnostic Engineering
management 2009, June 09-11, San.Sebastian, Spain
10. IEEE International Conference on Industrial Engineering and Engineering
Management (IEEM), Singapore, 08-11 December 2008
11. 21st International Congress of Condition Monitoring and Diagnostic Engineering
Management 2008, June 11-13, Prague, Czech Republic
12. 20th International Congress of Condition Monitoring and Diagnostic Engineering
Management 2007, June 14-16, Faro, Portugal
b) Technical Session Chair and paper presentation:
• 23rd International Congress of COMADEM 2010, 28 June – 02Jul, Nara, Japan
• 22nd International Congress of Condition Monitoring and Diagnostic Engineering
management 2009, June 09-11, San Sebastinan, Spain
• IEEM International Conference (IEEE), Singapore, 08-11 December 2008
• 5th MASSMIN Conference 2008, 08-11 June, Luleå, Sweden
• 20th International Congress of Condition Monitoring and Diagnostic Engineering
management 2007, 12-15 June, Faro, Portugal
• 18th International Congress of Condition Monitoring and Diagnostic Engineering
management 2005, 31st Aug-2nd Sep, Cranfield, UK
c) Chairman Program Committee and member of editorial and organizing committee of 1st
International Workshop and Congress of eMaintenance2010 at Luleå, 22-24 June 2010
d) Coordinator and organizer of 19th International Congress on Condition Monitoring and
Diagnostic Engineering Management, Luleå, Sweden, 12-15 June 2006.
e) Editor, Proceedings of 19th International Congress on “Condition Monitoring and
Diagnostic Engineering Management” 12-15 June 2006.
8
Editorial/Advisory board of International journals
1. Associate editor, International Journal of System Engineering Assurance Management,
ISSN 0975-6809, Springers India
2. Member of the Editorial Board, International Journal of Performability Engineering,
Peer-review assignment for journals
a) Journal of Quality in Maintenance Engineering 2007(1), 2008 (2), 2009 (1), 2010 (1)
b) International Journal on Condition Monitoring and Diagnostic Engineering Management
2007 (1), 2008 (1), 2009 (2), 2010 (4)
c) European Journal of Operation engineering and Management 2008 (1)
d) IFAC conference/Journal, 2007 (1), 2008 (1), 2009 and 2010 (2)
Examiner assignments
Expert assessor assignments
1. Invitee Expert for the EU-FP-6 DYNAMITE project’s final workshop and
demonstration at Torino, Italy, Feb, 2009
2. Invitee Expert and keynote speaker for the 2nd European Plant Asset and Lifecycle
Management (PALM) Forum 15-16 October 2009, Vienna
Scientific merits outside the university sphere
- Member, EFNMS European Maintenance Benchmarking Committee, 2010
- Secretary and Member of the Jury, Masters Thesis Award Committee, European
Federation of National Maintenance Societies (EFNMS), since 2009
- Conducted workshop on “Maintenance Performance Measurement” at Energy
Centre, Tehran University, 2007
- Conducted Workshop on “Maintenance Engineering” for Iran Khodro Company,
Tehran, 2005
Membership on board/committees
Member of the SHB Departmental Research development committee since
2007
Other professional administrative assignments:
- Secretary, Masters Thesis Award Committee for the Excellent Masters
Thesis in Maintenance Engineering for the European Federation of
National Maintenance Society (EFNMS)
- International Co-ordinator for Networking and collaboration of the
Division and for the visiting Professors visit and courses/seminars
Other pertinent activities
- Coordinator of the Division for European Network of Strategic Engineering
Asset Management (EURENSEAM) involving 14 European Universities